12 files changed, 393 insertions, 20 deletions
diff --git a/fpga/usrp1/common/fpga_regs_common.v b/fpga/usrp1/common/fpga_regs_common.v
new file mode 100644
index 000000000..8035d8565
--- /dev/null
+++ b/fpga/usrp1/common/fpga_regs_common.v
@@ -0,0 +1,117 @@
+//
+// This file is machine generated from ./fpga_regs_common.h
+// Do not edit by hand; your edits will be overwritten.
+//
+
+// This file defines registers common to all FPGA configurations.
+// Registers 0 to 31 are reserved for use in this file.
+
+
+// The FPGA needs to know the rate that samples are coming from and
+// going to the A/D's and D/A's.  div = 128e6 / sample_rate
+
+`define FR_TX_SAMPLE_RATE_DIV     7'd0
+`define FR_RX_SAMPLE_RATE_DIV     7'd1
+
+// 2 and 3 are defined in the ATR section
+
+`define FR_MASTER_CTRL            7'd4	// master enable and reset controls
+
+// i/o direction registers for pins that go to daughterboards.
+// Setting the bit makes it an output from the FPGA to the d'board.
+// top 16 is mask, low 16 is value
+
+`define FR_OE_0                   7'd5	// slot 0
+`define FR_OE_1                   7'd6
+`define FR_OE_2                   7'd7
+`define FR_OE_3                   7'd8
+
+// i/o registers for pins that go to daughterboards.
+// top 16 is a mask, low 16 is value
+
+`define FR_IO_0                   7'd9	// slot 0
+`define FR_IO_1                   7'd10
+`define FR_IO_2                   7'd11
+`define FR_IO_3                   7'd12
+
+`define FR_MODE                   7'd13
+
+
+// If the corresponding bit is set, internal FPGA debug circuitry
+// controls the i/o pins for the associated bank of daughterboard
+// i/o pins.  Typically used for debugging FPGA designs.
+
+`define FR_DEBUG_EN               7'd14
+
+
+// If the corresponding bit is set, enable the automatic DC
+// offset correction control loop.
+//
+// The 4 low bits are significant:
+//
+//   ADC0 = (1 << 0)
+//   ADC1 = (1 << 1)
+//   ADC2 = (1 << 2)
+//   ADC3 = (1 << 3)
+//
+// This control loop works if the attached daugherboard blocks DC.
+// Currently all daughterboards do block DC.  This includes:
+// basic rx, dbs_rx, tv_rx, flex_xxx_rx.
+
+`define FR_DC_OFFSET_CL_EN        7'd15			// DC Offset Control Loop Enable
+
+
+// offset corrections for ADC's and DAC's (2's complement)
+
+`define FR_ADC_OFFSET_0           7'd16
+`define FR_ADC_OFFSET_1           7'd17
+`define FR_ADC_OFFSET_2           7'd18
+`define FR_ADC_OFFSET_3           7'd19
+
+
+// ------------------------------------------------------------------------
+// Automatic Transmit/Receive switching
+//
+// If automatic transmit/receive (ATR) switching is enabled in the
+// FR_ATR_CTL register, the presence or absence of data in the FPGA
+// transmit fifo selects between two sets of values for each of the 4
+// banks of daughterboard i/o pins.
+//
+// Each daughterboard slot has 3 16-bit registers associated with it:
+//   FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
+//
+// FR_ATR_MASK_{0,1,2,3}: 
+//
+//   These registers determine which of the daugherboard i/o pins are
+//   affected by ATR switching.  If a bit in the mask is set, the
+//   corresponding i/o bit is controlled by ATR, else it's output
+//   value comes from the normal i/o pin output register:
+//   FR_IO_{0,1,2,3}.
+//
+// FR_ATR_TXVAL_{0,1,2,3}:
+// FR_ATR_RXVAL_{0,1,2,3}:
+//
+//   If the Tx fifo contains data, then the bits from TXVAL that are
+//   selected by MASK are output.  Otherwise, the bits from RXVAL that
+//   are selected by MASK are output.
+                      
+`define FR_ATR_MASK_0             7'd20	// slot 0
+`define FR_ATR_TXVAL_0            7'd21
+`define FR_ATR_RXVAL_0            7'd22
+
+`define FR_ATR_MASK_1             7'd23	// slot 1
+`define FR_ATR_TXVAL_1            7'd24
+`define FR_ATR_RXVAL_1            7'd25
+
+`define FR_ATR_MASK_2             7'd26	// slot 2
+`define FR_ATR_TXVAL_2            7'd27
+`define FR_ATR_RXVAL_2            7'd28
+
+`define FR_ATR_MASK_3             7'd29	// slot 3
+`define FR_ATR_TXVAL_3            7'd30
+`define FR_ATR_RXVAL_3            7'd31
+
+// Clock ticks to delay rising and falling edge of T/R signal
+`define FR_ATR_TX_DELAY           7'd2
+`define FR_ATR_RX_DELAY           7'd3
+
diff --git a/fpga/usrp1/common/fpga_regs_standard.v b/fpga/usrp1/common/fpga_regs_standard.v
new file mode 100644
index 000000000..d09aa6116
--- /dev/null
+++ b/fpga/usrp1/common/fpga_regs_standard.v
@@ -0,0 +1,256 @@
+//
+// This file is machine generated from ./fpga_regs_standard.h
+// Do not edit by hand; your edits will be overwritten.
+//
+
+// Register numbers 0 to 31 are reserved for use in fpga_regs_common.h.
+// Registers 64 to 79 are available for custom FPGA builds.
+
+
+// DDC / DUC
+
+`define FR_INTERP_RATE            7'd32	// [1,1024]
+`define FR_DECIM_RATE             7'd33	// [1,256]
+
+// DDC center freq
+
+`define FR_RX_FREQ_0              7'd34
+`define FR_RX_FREQ_1              7'd35
+`define FR_RX_FREQ_2              7'd36
+`define FR_RX_FREQ_3              7'd37
+
+// See below for DDC Starting Phase
+
+// ------------------------------------------------------------------------
+//  configure FPGA Rx mux
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------+-------+-------+-------+-------+-+-----+
+// |      must be zero     | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH |
+// +-----------------------+-------+-------+-------+-------+-+-----+
+//
+// There are a maximum of 4 digital downconverters in the the FPGA.
+// Each DDC has two 16-bit inputs, I and Q, and two 16-bit outputs, I & Q.
+//
+// DDC I inputs are specified by the two bit fields I3, I2, I1 & I0
+//
+//   0 = DDC input is from ADC 0
+//   1 = DDC input is from ADC 1
+//   2 = DDC input is from ADC 2
+//   3 = DDC input is from ADC 3
+//
+// If Z == 1, all DDC Q inputs are set to zero
+// If Z == 0, DDC Q inputs are specified by the two bit fields Q3, Q2, Q1 & Q0
+//
+// NCH specifies the number of complex channels that are sent across
+// the USB.  The legal values are 1, 2 or 4, corresponding to 2, 4 or
+// 8 16-bit values.
+
+`define FR_RX_MUX                 7'd38
+
+// ------------------------------------------------------------------------
+//  configure FPGA Tx Mux.
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------+-------+-------+-------+-------+-+-----+
+// |                       | DAC3  | DAC2  | DAC1  |  DAC0 |0| NCH |
+// +-----------------------------------------------+-------+-+-----+
+//
+// NCH specifies the number of complex channels that are sent across
+// the USB.  The legal values are 1 or 2, corresponding to 2 or 4
+// 16-bit values.
+//
+// There are two interpolators with complex inputs and outputs.
+// There are four DACs.  (We use the DUC in each AD9862.)
+//
+// Each 4-bit DACx field specifies the source for the DAC and
+// whether or not that DAC is enabled.  Each subfield is coded
+// like this: 
+//
+//    3 2 1 0
+//   +-+-----+
+//   |E|  N  |
+//   +-+-----+
+//
+// Where E is set if the DAC is enabled, and N specifies which
+// interpolator output is connected to this DAC.
+//
+//  N   which interp output
+// ---  -------------------
+//  0   chan 0 I
+//  1   chan 0 Q
+//  2   chan 1 I
+//  3   chan 1 Q
+
+`define FR_TX_MUX                 7'd39
+
+// ------------------------------------------------------------------------
+// REFCLK control
+//
+// Control whether a reference clock is sent to the daughterboards,
+// and what frequency.  The refclk is sent on d'board i/o pin 0.
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------------+-+------------+
+// |             Reserved (Must be zero)           |E|   DIVISOR  |
+// +-----------------------------------------------+-+------------+
+
+//
+// Bit 7  -- 1 turns on refclk, 0 allows IO use
+// Bits 6:0 Divider value
+
+`define FR_TX_A_REFCLK            7'd40
+`define FR_RX_A_REFCLK            7'd41
+`define FR_TX_B_REFCLK            7'd42
+`define FR_RX_B_REFCLK            7'd43
+
+
+// ------------------------------------------------------------------------
+// DDC Starting Phase
+
+`define FR_RX_PHASE_0             7'd44
+`define FR_RX_PHASE_1             7'd45
+`define FR_RX_PHASE_2             7'd46
+`define FR_RX_PHASE_3             7'd47
+
+// ------------------------------------------------------------------------
+// Tx data format control register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-------------------------------------------------------+-------+
+// |                    Reserved (Must be zero)            |  FMT  |
+// +-------------------------------------------------------+-------+
+//
+//  FMT values:
+
+`define FR_TX_FORMAT              7'd48
+
+// ------------------------------------------------------------------------
+// Rx data format control register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------+-+-+---------+-------+
+// |          Reserved (Must be zero)        |B|Q|  WIDTH  | SHIFT |
+// +-----------------------------------------+-+-+---------+-------+
+//
+//  FMT values:
+
+`define FR_RX_FORMAT              7'd49
+
+
+// The valid combinations currently are:
+//
+//   B  Q  WIDTH  SHIFT
+//   0  1    16     0
+//   0  1     8     8
+
+
+// Possible future values of WIDTH = {4, 2, 1}
+// 12 takes a bit more work, since we need to know packet alignment.
+
+// ------------------------------------------------------------------------
+// FIXME register numbers 50 to 63 are available
+
+// ------------------------------------------------------------------------
+// Registers 64 to 95 are reserved for user custom FPGA builds.
+// The standard USRP software will not touch these.
+
+`define FR_USER_0                 7'd64
+`define FR_USER_1                 7'd65
+`define FR_USER_2                 7'd66
+`define FR_USER_3                 7'd67
+`define FR_USER_4                 7'd68
+`define FR_USER_5                 7'd69
+`define FR_USER_6                 7'd70
+`define FR_USER_7                 7'd71
+`define FR_USER_8                 7'd72
+`define FR_USER_9                 7'd73
+`define FR_USER_10                7'd74
+`define FR_USER_11                7'd75
+`define FR_USER_12                7'd76
+`define FR_USER_13                7'd77
+`define FR_USER_14                7'd78
+`define FR_USER_15                7'd79
+`define FR_USER_16                7'd80
+`define FR_USER_17                7'd81
+`define FR_USER_18                7'd82
+`define FR_USER_19                7'd83
+`define FR_USER_20                7'd84
+`define FR_USER_21                7'd85
+`define FR_USER_22                7'd86
+`define FR_USER_23                7'd87
+`define FR_USER_24                7'd88
+`define FR_USER_25                7'd89
+`define FR_USER_26                7'd90
+`define FR_USER_27                7'd91
+`define FR_USER_28                7'd92
+`define FR_USER_29                7'd93
+`define FR_USER_30                7'd94
+`define FR_USER_31                7'd95
+
+//Registers needed for multi usrp master/slave configuration
+//
+//Rx Master/slave control register (FR_RX_MASTER_SLAVE = FR_USER_0)
+//
+`define FR_RX_MASTER_SLAVE        7'd64
+`define bitnoFR_RX_SYNC           0
+`define bitnoFR_RX_SYNC_MASTER    1
+`define bitnoFR_RX_SYNC_SLAVE     2
+
+
+//Caution The master settings will output values on the io lines.
+//They inheritely enable these lines as output. If you have a daughtercard which uses these lines also as output then you will burn your usrp and daughtercard.
+//If you set the slave bits then your usrp won't do anything if you don't connect a master.
+// Rx Master/slave control register
+//
+// The way this is supposed to be used is connecting a (short) 16pin flatcable from an rx daughterboard in RXA master io_rx[8..15] to slave io_rx[8..15] on RXA of slave usrp
+// This can be done with basic_rx boards or dbsrx boards
+//dbsrx: connect master-J25 to slave-J25
+//basic rx: connect J25 to slave-J25
+//CAUTION: pay attention to the lineup of your connector.
+//The red line (pin1) should be at the same side of the daughterboards on master and slave.
+//If you turnaround the cable on one end you will burn your usrp.
+
+//You cannot use a 16pin flatcable if you are using FLEX400 or FLEX2400 daughterboards, since these use a lot of the io pins.
+//You can still link them but you must use only a 2pin or 1pin cable
+//You can also use a 2-wire link. put a 2pin header on io[15],gnd of the master RXA daughterboard and connect it to io15,gnd of the slave RXA db.
+//You can use a cable like the ones found with the leds on the mainbord of a PC.
+//Make sure you don't twist the cable, otherwise you connect the sync output to ground.
+//To be save you could also just use a single wire from master io[15] to slave io[15], but this is not optimal for signal integrity.
+
+
+// Since rx_io[0] can normally be used as a refclk and is not exported on all daughterboards this line
+// still has the refclk function if you use the master/slave setup (it is not touched by the master/slave settings).
+// The master/slave circuitry will only use io pin 15 and does not touch any of the other io pins.
+`define bitnoFR_RX_SYNC_INPUT_IOPIN 15
+`define bmFR_RX_SYNC_INPUT_IOPIN  (1<<bitnoFR_RX_SYNC_INPUT_IOPIN)
+//TODO the output pin is still hardcoded in the verilog code, make it listen to the following define
+`define bitnoFR_RX_SYNC_OUTPUT_IOPIN 15
+`define bmFR_RX_SYNC_OUTPUT_IOPIN (1<<bitnoFR_RX_SYNC_OUTPUT_IOPIN)
+// =======================================================================
+// READBACK Registers
+// =======================================================================
+
+`define FR_RB_IO_RX_A_IO_TX_A     7'd1	// read back a-side i/o pins
+`define FR_RB_IO_RX_B_IO_TX_B     7'd2	// read back b-side i/o pins
+
+// ------------------------------------------------------------------------
+// FPGA Capability register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------------+-+-----+-+-----+
+// |                    Reserved (Must be zero)    |T|NDUC |R|NDDC |
+// +-----------------------------------------------+-+-----+-+-----+
+//
+// Bottom 4-bits are Rx capabilities
+// Next   4-bits are Tx capabilities
+
+`define FR_RB_CAPS                7'd3
+
+
diff --git a/fpga/usrp1/inband_lib/rx_buffer_inband.v b/fpga/usrp1/inband_lib/rx_buffer_inband.v
index cbd2d8958..40c7ec7bd 100755
--- a/fpga/usrp1/inband_lib/rx_buffer_inband.v
+++ b/fpga/usrp1/inband_lib/rx_buffer_inband.v
@@ -1,5 +1,5 @@
-//`include "../../firmware/include/fpga_regs_common.v"
-//`include "../../firmware/include/fpga_regs_standard.v"
+//`include "../common/fpga_regs_common.v"
+//`include "../common/fpga_regs_standard.v"
 module rx_buffer_inband
   ( input usbclk,
     input bus_reset,
diff --git a/fpga/usrp1/sdr_lib/adc_interface.v b/fpga/usrp1/sdr_lib/adc_interface.v
index f18ffc104..cb78f332a 100644
--- a/fpga/usrp1/sdr_lib/adc_interface.v
+++ b/fpga/usrp1/sdr_lib/adc_interface.v
@@ -1,7 +1,7 @@
 
 
-`include "../../firmware/include/fpga_regs_common.v"
-`include "../../firmware/include/fpga_regs_standard.v"
+`include "../common/fpga_regs_common.v"
+`include "../common/fpga_regs_standard.v"
 
 module adc_interface
   (input clock, input reset, input enable,
diff --git a/fpga/usrp1/sdr_lib/io_pins.v b/fpga/usrp1/sdr_lib/io_pins.v
index ad1b7b4a8..b8bf59555 100644
--- a/fpga/usrp1/sdr_lib/io_pins.v
+++ b/fpga/usrp1/sdr_lib/io_pins.v
@@ -19,8 +19,8 @@
 //  Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
 //
 
-`include "../../firmware/include/fpga_regs_common.v"
-`include "../../firmware/include/fpga_regs_standard.v"
+`include "../common/fpga_regs_common.v"
+`include "../common/fpga_regs_standard.v"
 
 module io_pins
   ( inout wire [15:0] io_0, inout wire [15:0] io_1, inout wire [15:0] io_2, inout wire [15:0] io_3,
diff --git a/fpga/usrp1/sdr_lib/master_control_multi.v b/fpga/usrp1/sdr_lib/master_control_multi.v
index cab96a79f..eee8ebfa3 100644
--- a/fpga/usrp1/sdr_lib/master_control_multi.v
+++ b/fpga/usrp1/sdr_lib/master_control_multi.v
@@ -19,8 +19,8 @@
 //  Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
 //
 `include "config.vh"
-`include "../../../firmware/include/fpga_regs_common.v"
-`include "../../../firmware/include/fpga_regs_standard.v"
+`include "../../common/fpga_regs_common.v"
+`include "../../common/fpga_regs_standard.v"
 // Clock, enable, and reset controls for whole system
 // Modified version to enable multi_usrp synchronisation
 
diff --git a/fpga/usrp1/sdr_lib/rx_buffer.v b/fpga/usrp1/sdr_lib/rx_buffer.v
index d17294b98..5541d2912 100644
--- a/fpga/usrp1/sdr_lib/rx_buffer.v
+++ b/fpga/usrp1/sdr_lib/rx_buffer.v
@@ -22,8 +22,8 @@
 // Interface to Cypress FX2 bus
 // A packet is 512 Bytes, the fifo has 4096 lines of 18 bits each
 
-`include "../../firmware/include/fpga_regs_common.v"
-`include "../../firmware/include/fpga_regs_standard.v"
+`include "../common/fpga_regs_common.v"
+`include "../common/fpga_regs_standard.v"
 
 module rx_buffer
   ( // Read/USB side
diff --git a/fpga/usrp1/toplevel/mrfm/mrfm.v b/fpga/usrp1/toplevel/mrfm/mrfm.v
index 7a0e38059..6b7442ef3 100644
--- a/fpga/usrp1/toplevel/mrfm/mrfm.v
+++ b/fpga/usrp1/toplevel/mrfm/mrfm.v
@@ -24,8 +24,8 @@
 // Uncomment the following to include optional circuitry
 
 `include "mrfm.vh"
-`include "../../../firmware/include/fpga_regs_common.v"
-`include "../../../firmware/include/fpga_regs_standard.v"
+`include "../../common/fpga_regs_common.v"
+`include "../../common/fpga_regs_standard.v"
 
 module mrfm
 (output MYSTERY_SIGNAL,
diff --git a/fpga/usrp1/toplevel/mrfm/mrfm_proc.v b/fpga/usrp1/toplevel/mrfm/mrfm_proc.v
index 80de9fc90..7da934a6e 100644
--- a/fpga/usrp1/toplevel/mrfm/mrfm_proc.v
+++ b/fpga/usrp1/toplevel/mrfm/mrfm_proc.v
@@ -1,7 +1,7 @@
 
 `include "mrfm.vh"
-`include "../../../firmware/include/fpga_regs_common.v"
-`include "../../../firmware/include/fpga_regs_standard.v"
+`include "../../common/fpga_regs_common.v"
+`include "../../common/fpga_regs_standard.v"
 
 module mrfm_proc (input clock, input reset, input enable,
 		  input [6:0] serial_addr, input [31:0] serial_data, input serial_strobe,
diff --git a/fpga/usrp1/toplevel/usrp_inband_usb/usrp_inband_usb.v b/fpga/usrp1/toplevel/usrp_inband_usb/usrp_inband_usb.v
index 79f0dfa4a..49ed7444d 100644
--- a/fpga/usrp1/toplevel/usrp_inband_usb/usrp_inband_usb.v
+++ b/fpga/usrp1/toplevel/usrp_inband_usb/usrp_inband_usb.v
@@ -23,8 +23,8 @@
 `define RX_IN_BAND
 
 `include "config.vh"
-`include "../../../firmware/include/fpga_regs_common.v"
-`include "../../../firmware/include/fpga_regs_standard.v"
+`include "../../common/fpga_regs_common.v"
+`include "../../common/fpga_regs_standard.v"
 
 module usrp_inband_usb
 (output MYSTERY_SIGNAL,
diff --git a/fpga/usrp1/toplevel/usrp_multi/usrp_multi.v b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.v
index ce484fc1c..08ae0c2aa 100644
--- a/fpga/usrp1/toplevel/usrp_multi/usrp_multi.v
+++ b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.v
@@ -29,8 +29,8 @@
 // Uncomment the following to include optional circuitry
 
 `include "config.vh"
-`include "../../../firmware/include/fpga_regs_common.v"
-`include "../../../firmware/include/fpga_regs_standard.v"
+`include "../../common/fpga_regs_common.v"
+`include "../../common/fpga_regs_standard.v"
 
 module usrp_multi
 (output MYSTERY_SIGNAL,
diff --git a/fpga/usrp1/toplevel/usrp_std/usrp_std.v b/fpga/usrp1/toplevel/usrp_std/usrp_std.v
index 83a89cb81..b2eaceb25 100644
--- a/fpga/usrp1/toplevel/usrp_std/usrp_std.v
+++ b/fpga/usrp1/toplevel/usrp_std/usrp_std.v
@@ -28,8 +28,8 @@
 // Uncomment the following to include optional circuitry
 
 `include "config.vh"
-`include "../../../../firmware/fx2/common/fpga_regs_common.v"
-`include "../../../../firmware/fx2/common/fpga_regs_standard.v"
+`include "../../common/fpga_regs_common.v"
+`include "../../common/fpga_regs_standard.v"
 
 module usrp_std
 (output MYSTERY_SIGNAL,