diff options
Diffstat (limited to 'fpga/usrp1/toplevel/usrp_multi')
| -rw-r--r-- | fpga/usrp1/toplevel/usrp_multi/.gitignore | 16 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/usrp_multi/config.vh | 62 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/usrp_multi/usrp_multi.csf | 444 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/usrp_multi/usrp_multi.esf | 14 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/usrp_multi/usrp_multi.psf | 312 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/usrp_multi/usrp_multi.qpf | 29 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/usrp_multi/usrp_multi.qsf | 408 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/usrp_multi/usrp_multi.v | 379 |
8 files changed, 1664 insertions, 0 deletions
diff --git a/fpga/usrp1/toplevel/usrp_multi/.gitignore b/fpga/usrp1/toplevel/usrp_multi/.gitignore new file mode 100644 index 000000000..2cc25f0f2 --- /dev/null +++ b/fpga/usrp1/toplevel/usrp_multi/.gitignore @@ -0,0 +1,16 @@ +/*.qws +/*.eqn +/*.done +/*.htm +/*.rpt +/*.ini +/*.fsf +/*.jam +/*.jbc +/*.pin +/*.pof +/*.sof +/*.rbf +/*.ttf +/*.summary +/db diff --git a/fpga/usrp1/toplevel/usrp_multi/config.vh b/fpga/usrp1/toplevel/usrp_multi/config.vh new file mode 100644 index 000000000..07011bd48 --- /dev/null +++ b/fpga/usrp1/toplevel/usrp_multi/config.vh @@ -0,0 +1,62 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2006,2007 Matt Ettus +// Copyright (C) 2006 Martin Dudok van Heel +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +// ==================================================================== +// User control over what parts get included +// +// >>>> EDIT ONLY THIS SECTION <<<< +// Uncomment only ONE configuration +// ==================================================================== + +// ==================================================================== +// FIXME drive configuration selection from the command line and/or gui +// ==================================================================== + +`define MULTI_ON // enable multi usrp configuration + +// Uncomment this for 1 rx channel (w/ halfband) & 1 transmit channel +//`include "../include/common_config_1rxhb_1tx.vh" + +// Uncomment this for multi with 2 rx channels (w/ halfband) & 2 transmit channels +`include "../include/common_config_2rxhb_2tx.vh" + +// Uncomment this for multi with 4 rx channels (w/o halfband) & 0 transmit channels +//`include "../include/common_config_4rx_0tx.vh" + +// Uncomment this for multi with 2 rx channels (w/ halfband) & 0 transmit channels +//`include "../include/common_config_2rxhb_0tx.vh" + +// Uncomment this for multi with 2 rx channels (w/o halfband) & 0 transmit channels +//`include "../include/common_config_2rx_0tx.vh" + + +// Add other "known to fit" configurations here... + +// ==================================================================== +// Now include the common footer +// ==================================================================== + +`ifdef MULTI_ON + `define COUNTER_32BIT_ON +`endif + +`include "../include/common_config_bottom.vh" diff --git a/fpga/usrp1/toplevel/usrp_multi/usrp_multi.csf b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.csf new file mode 100644 index 000000000..2f5df2bca --- /dev/null +++ b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.csf @@ -0,0 +1,444 @@ +COMPILER_SETTINGS +{ + IO_PLACEMENT_OPTIMIZATION = OFF; + ENABLE_DRC_SETTINGS = OFF; + PHYSICAL_SYNTHESIS_REGISTER_RETIMING = OFF; + PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION = OFF; + PHYSICAL_SYNTHESIS_COMBO_LOGIC = OFF; + DRC_FANOUT_EXCEEDING = 30; + DRC_REPORT_FANOUT_EXCEEDING = OFF; + DRC_TOP_FANOUT = 50; + DRC_REPORT_TOP_FANOUT = OFF; + RUN_DRC_DURING_COMPILATION = OFF; + ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON; + ADV_NETLIST_OPT_SYNTH_USE_FITTER_INFO = OFF; + ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF; + ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF; + SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF; + MERGE_HEX_FILE = OFF; + TRUE_WYSIWYG_FLOW = OFF; + SEED = 1; + FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY; + FAMILY = Cyclone; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB"; + DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4"; + DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS"; + DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS"; + DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS"; + STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2"; + STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1"; + FAST_FIT_COMPILATION = OFF; + SIGNALPROBE_DURING_NORMAL_COMPILATION = OFF; + OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = ON; + OPTIMIZE_TIMING = "NORMAL COMPILATION"; + OPTIMIZE_HOLD_TIMING = OFF; + COMPILATION_LEVEL = FULL; + SAVE_DISK_SPACE = OFF; + SPEED_DISK_USAGE_TRADEOFF = NORMAL; + LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF; + SIGNALPROBE_ALLOW_OVERUSE = OFF; + FOCUS_ENTITY_NAME = |usrp_multi; + ROUTING_BACK_ANNOTATION_MODE = OFF; + INC_PLC_MODE = OFF; + FIT_ONLY_ONE_ATTEMPT = OFF; +} +DEFAULT_DEVICE_OPTIONS +{ + GENERATE_CONFIG_HEXOUT_FILE = OFF; + GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_JBC_FILE = OFF; + GENERATE_CONFIG_JAM_FILE = OFF; + GENERATE_CONFIG_ISC_FILE = OFF; + GENERATE_CONFIG_SVF_FILE = OFF; + GENERATE_JBC_FILE_COMPRESSED = ON; + GENERATE_JBC_FILE = OFF; + GENERATE_JAM_FILE = OFF; + GENERATE_ISC_FILE = OFF; + GENERATE_SVF_FILE = OFF; + RESERVE_PIN = "AS INPUT TRI-STATED"; + RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND"; + HEXOUT_FILE_COUNT_DIRECTION = UP; + HEXOUT_FILE_START_ADDRESS = 0; + GENERATE_HEX_FILE = OFF; + GENERATE_RBF_FILE = OFF; + GENERATE_TTF_FILE = OFF; + RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED"; + RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF; + AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON; + EPROM_USE_CHECKSUM_AS_USERCODE = OFF; + FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIGURATION_DEVICE = AUTO; + CYCLONE_CONFIGURATION_DEVICE = AUTO; + FLEX10K_CONFIGURATION_DEVICE = AUTO; + FLEX6K_CONFIGURATION_DEVICE = AUTO; + MERCURY_CONFIGURATION_DEVICE = AUTO; + EXCALIBUR_CONFIGURATION_DEVICE = AUTO; + APEX20K_CONFIGURATION_DEVICE = AUTO; + USE_CONFIGURATION_DEVICE = ON; + ENABLE_INIT_DONE_OUTPUT = OFF; + FLEX10K_ENABLE_LOCK_OUTPUT = OFF; + ENABLE_DEVICE_WIDE_OE = OFF; + ENABLE_DEVICE_WIDE_RESET = OFF; + RELEASE_CLEARS_BEFORE_TRI_STATES = OFF; + AUTO_RESTART_CONFIGURATION = OFF; + ENABLE_VREFB_PIN = OFF; + ENABLE_VREFA_PIN = OFF; + SECURITY_BIT = OFF; + USER_START_UP_CLOCK = OFF; + APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + CYCLONE_CONFIGURATION_SCHEME = "ACTIVE SERIAL"; + STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + STRATIX_UPDATE_MODE = STANDARD; + USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_JTAG_USER_CODE = 7F; + MERCURY_JTAG_USER_CODE = FFFFFFFF; + APEX20K_JTAG_USER_CODE = FFFFFFFF; + STRATIX_JTAG_USER_CODE = FFFFFFFF; + MAX7000S_JTAG_USER_CODE = FFFF; + RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF; + ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + MAX7000_ENABLE_JTAG_BST_SUPPORT = ON; + ENABLE_JTAG_BST_SUPPORT = OFF; + CONFIGURATION_CLOCK_DIVISOR = 1; + CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ"; + CLOCK_SOURCE = INTERNAL; + COMPRESSION_MODE = OFF; + ON_CHIP_BITSTREAM_DECOMPRESSION = OFF; +} +AUTO_SLD_HUB_ENTITY +{ + AUTO_INSERT_SLD_HUB_ENTITY = ENABLE; + HUB_INSTANCE_NAME = SLD_HUB_INST; + HUB_ENTITY_NAME = SLD_HUB; +} +SIGNALTAP_LOGIC_ANALYZER_SETTINGS +{ + ENABLE_SIGNALTAP = Off; + AUTO_ENABLE_SMART_COMPILE = On; +} +CHIP(usrp_multi) +{ + DEVICE = EP1C12Q240C8; + DEVICE_FILTER_PACKAGE = "ANY QFP"; + DEVICE_FILTER_PIN_COUNT = 240; + DEVICE_FILTER_SPEED_GRADE = ANY; + AUTO_RESTART_CONFIGURATION = OFF; + RELEASE_CLEARS_BEFORE_TRI_STATES = OFF; + USER_START_UP_CLOCK = OFF; + ENABLE_DEVICE_WIDE_RESET = OFF; + ENABLE_DEVICE_WIDE_OE = OFF; + ENABLE_INIT_DONE_OUTPUT = OFF; + FLEX10K_ENABLE_LOCK_OUTPUT = OFF; + ENABLE_JTAG_BST_SUPPORT = OFF; + MAX7000_ENABLE_JTAG_BST_SUPPORT = ON; + APEX20K_JTAG_USER_CODE = FFFFFFFF; + MERCURY_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_JTAG_USER_CODE = 7F; + MAX7000_JTAG_USER_CODE = FFFFFFFF; + MAX7000S_JTAG_USER_CODE = FFFF; + STRATIX_JTAG_USER_CODE = FFFFFFFF; + APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + CYCLONE_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + USE_CONFIGURATION_DEVICE = OFF; + APEX20K_CONFIGURATION_DEVICE = AUTO; + MERCURY_CONFIGURATION_DEVICE = AUTO; + FLEX6K_CONFIGURATION_DEVICE = AUTO; + FLEX10K_CONFIGURATION_DEVICE = AUTO; + EXCALIBUR_CONFIGURATION_DEVICE = AUTO; + STRATIX_CONFIGURATION_DEVICE = AUTO; + CYCLONE_CONFIGURATION_DEVICE = AUTO; + STRATIX_UPDATE_MODE = STANDARD; + APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON; + DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF; + COMPRESSION_MODE = OFF; + ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF; + FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + EPROM_USE_CHECKSUM_AS_USERCODE = OFF; + USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_USE_CHECKSUM_AS_USERCODE = OFF; + GENERATE_TTF_FILE = OFF; + GENERATE_RBF_FILE = ON; + GENERATE_HEX_FILE = OFF; + SECURITY_BIT = OFF; + ENABLE_VREFA_PIN = OFF; + ENABLE_VREFB_PIN = OFF; + GENERATE_SVF_FILE = OFF; + GENERATE_ISC_FILE = OFF; + GENERATE_JAM_FILE = OFF; + GENERATE_JBC_FILE = OFF; + GENERATE_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_SVF_FILE = OFF; + GENERATE_CONFIG_ISC_FILE = OFF; + GENERATE_CONFIG_JAM_FILE = OFF; + GENERATE_CONFIG_JBC_FILE = OFF; + GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_HEXOUT_FILE = OFF; + ON_CHIP_BITSTREAM_DECOMPRESSION = OFF; + BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE = OFF; + HEXOUT_FILE_START_ADDRESS = 0; + HEXOUT_FILE_COUNT_DIRECTION = UP; + RESERVE_ALL_UNUSED_PINS = "AS INPUT TRI-STATED"; + STRATIX_DEVICE_IO_STANDARD = LVTTL; + CLOCK_SOURCE = INTERNAL; + CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ"; + CONFIGURATION_CLOCK_DIVISOR = 1; + RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED"; + RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + SCLK : LOCATION = Pin_101; + SDI : LOCATION = Pin_100; + SEN : LOCATION = Pin_98; + SLD : LOCATION = Pin_95; + adc1_data[0] : LOCATION = Pin_5; + adc1_data[10] : LOCATION = Pin_235; + adc1_data[11] : LOCATION = Pin_234; + adc1_data[1] : LOCATION = Pin_4; + adc1_data[2] : LOCATION = Pin_3; + adc1_data[3] : LOCATION = Pin_2; + adc1_data[4] : LOCATION = Pin_1; + adc1_data[4] : IO_STANDARD = LVTTL; + adc1_data[5] : LOCATION = Pin_240; + adc1_data[6] : LOCATION = Pin_239; + adc1_data[7] : LOCATION = Pin_238; + adc1_data[8] : LOCATION = Pin_237; + adc1_data[9] : LOCATION = Pin_236; + adc2_data[0] : LOCATION = Pin_20; + adc2_data[10] : LOCATION = Pin_8; + adc2_data[11] : LOCATION = Pin_7; + adc2_data[1] : LOCATION = Pin_19; + adc2_data[2] : LOCATION = Pin_18; + adc2_data[3] : LOCATION = Pin_17; + adc2_data[4] : LOCATION = Pin_16; + adc2_data[5] : LOCATION = Pin_15; + adc2_data[6] : LOCATION = Pin_14; + adc2_data[7] : LOCATION = Pin_13; + adc2_data[8] : LOCATION = Pin_12; + adc2_data[9] : LOCATION = Pin_11; + adc3_data[0] : LOCATION = Pin_200; + adc3_data[10] : LOCATION = Pin_184; + adc3_data[11] : LOCATION = Pin_183; + adc3_data[1] : LOCATION = Pin_197; + adc3_data[2] : LOCATION = Pin_196; + adc3_data[3] : LOCATION = Pin_195; + adc3_data[4] : LOCATION = Pin_194; + adc3_data[5] : LOCATION = Pin_193; + adc3_data[6] : LOCATION = Pin_188; + adc3_data[7] : LOCATION = Pin_187; + adc3_data[8] : LOCATION = Pin_186; + adc3_data[9] : LOCATION = Pin_185; + adc4_data[0] : LOCATION = Pin_222; + adc4_data[10] : LOCATION = Pin_203; + adc4_data[11] : LOCATION = Pin_202; + adc4_data[1] : LOCATION = Pin_219; + adc4_data[2] : LOCATION = Pin_217; + adc4_data[3] : LOCATION = Pin_216; + adc4_data[4] : LOCATION = Pin_215; + adc4_data[5] : LOCATION = Pin_214; + adc4_data[6] : LOCATION = Pin_213; + adc4_data[7] : LOCATION = Pin_208; + adc4_data[8] : LOCATION = Pin_207; + adc4_data[9] : LOCATION = Pin_206; + adc_oeb[0] : LOCATION = Pin_228; + adc_oeb[1] : LOCATION = Pin_21; + adc_oeb[2] : LOCATION = Pin_181; + adc_oeb[3] : LOCATION = Pin_218; + adc_otr[0] : LOCATION = Pin_233; + adc_otr[1] : LOCATION = Pin_6; + adc_otr[2] : LOCATION = Pin_182; + adc_otr[3] : LOCATION = Pin_201; + adclk0 : LOCATION = Pin_224; + adclk1 : LOCATION = Pin_226; + clk0 : LOCATION = Pin_28; + clk0 : RESERVE_PIN = "AS INPUT TRI-STATED"; + clk0 : IO_STANDARD = LVTTL; + clk1 : LOCATION = Pin_29; + clk1 : RESERVE_PIN = "AS INPUT TRI-STATED"; + clk1 : IO_STANDARD = LVTTL; + clk3 : LOCATION = Pin_152; + clk3 : RESERVE_PIN = "AS INPUT TRI-STATED"; + clk3 : IO_STANDARD = LVTTL; + clk_120mhz : LOCATION = Pin_153; + clk_120mhz : IO_STANDARD = LVTTL; + clk_out : LOCATION = Pin_63; + clk_out : IO_STANDARD = LVTTL; + dac1_data[0] : LOCATION = Pin_165; + dac1_data[10] : LOCATION = Pin_177; + dac1_data[11] : LOCATION = Pin_178; + dac1_data[12] : LOCATION = Pin_179; + dac1_data[13] : LOCATION = Pin_180; + dac1_data[1] : LOCATION = Pin_166; + dac1_data[2] : LOCATION = Pin_167; + dac1_data[3] : LOCATION = Pin_168; + dac1_data[4] : LOCATION = Pin_169; + dac1_data[5] : LOCATION = Pin_170; + dac1_data[6] : LOCATION = Pin_173; + dac1_data[7] : LOCATION = Pin_174; + dac1_data[8] : LOCATION = Pin_175; + dac1_data[9] : LOCATION = Pin_176; + dac2_data[0] : LOCATION = Pin_159; + dac2_data[10] : LOCATION = Pin_163; + dac2_data[11] : LOCATION = Pin_139; + dac2_data[12] : LOCATION = Pin_164; + dac2_data[13] : LOCATION = Pin_138; + dac2_data[1] : LOCATION = Pin_158; + dac2_data[2] : LOCATION = Pin_160; + dac2_data[3] : LOCATION = Pin_156; + dac2_data[4] : LOCATION = Pin_161; + dac2_data[5] : LOCATION = Pin_144; + dac2_data[6] : LOCATION = Pin_162; + dac2_data[7] : LOCATION = Pin_141; + dac2_data[8] : LOCATION = Pin_143; + dac2_data[9] : LOCATION = Pin_140; + dac3_data[0] : LOCATION = Pin_122; + dac3_data[10] : LOCATION = Pin_134; + dac3_data[11] : LOCATION = Pin_135; + dac3_data[12] : LOCATION = Pin_136; + dac3_data[13] : LOCATION = Pin_137; + dac3_data[1] : LOCATION = Pin_123; + dac3_data[2] : LOCATION = Pin_124; + dac3_data[3] : LOCATION = Pin_125; + dac3_data[4] : LOCATION = Pin_126; + dac3_data[5] : LOCATION = Pin_127; + dac3_data[6] : LOCATION = Pin_128; + dac3_data[7] : LOCATION = Pin_131; + dac3_data[8] : LOCATION = Pin_132; + dac3_data[9] : LOCATION = Pin_133; + dac4_data[0] : LOCATION = Pin_104; + dac4_data[10] : LOCATION = Pin_118; + dac4_data[11] : LOCATION = Pin_119; + dac4_data[12] : LOCATION = Pin_120; + dac4_data[13] : LOCATION = Pin_121; + dac4_data[1] : LOCATION = Pin_105; + dac4_data[2] : LOCATION = Pin_106; + dac4_data[3] : LOCATION = Pin_107; + dac4_data[4] : LOCATION = Pin_108; + dac4_data[5] : LOCATION = Pin_113; + dac4_data[6] : LOCATION = Pin_114; + dac4_data[7] : LOCATION = Pin_115; + dac4_data[8] : LOCATION = Pin_116; + dac4_data[9] : LOCATION = Pin_117; + enable_rx : LOCATION = Pin_88; + enable_tx : LOCATION = Pin_93; + gndbus[0] : LOCATION = Pin_223; + gndbus[0] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[0] : IO_STANDARD = LVTTL; + gndbus[1] : LOCATION = Pin_225; + gndbus[1] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[1] : IO_STANDARD = LVTTL; + gndbus[2] : LOCATION = Pin_227; + gndbus[2] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[2] : IO_STANDARD = LVTTL; + gndbus[3] : LOCATION = Pin_62; + gndbus[3] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[3] : IO_STANDARD = LVTTL; + gndbus[4] : LOCATION = Pin_64; + gndbus[4] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[4] : IO_STANDARD = LVTTL; + misc_pins[0] : LOCATION = Pin_87; + misc_pins[0] : IO_STANDARD = LVTTL; + misc_pins[10] : LOCATION = Pin_76; + misc_pins[10] : IO_STANDARD = LVTTL; + misc_pins[11] : LOCATION = Pin_74; + misc_pins[11] : IO_STANDARD = LVTTL; + misc_pins[1] : LOCATION = Pin_86; + misc_pins[1] : IO_STANDARD = LVTTL; + misc_pins[2] : LOCATION = Pin_85; + misc_pins[2] : IO_STANDARD = LVTTL; + misc_pins[3] : LOCATION = Pin_84; + misc_pins[3] : IO_STANDARD = LVTTL; + misc_pins[4] : LOCATION = Pin_83; + misc_pins[4] : IO_STANDARD = LVTTL; + misc_pins[5] : LOCATION = Pin_82; + misc_pins[5] : IO_STANDARD = LVTTL; + misc_pins[6] : LOCATION = Pin_79; + misc_pins[6] : IO_STANDARD = LVTTL; + misc_pins[7] : LOCATION = Pin_78; + misc_pins[7] : IO_STANDARD = LVTTL; + misc_pins[8] : LOCATION = Pin_77; + misc_pins[8] : IO_STANDARD = LVTTL; + misc_pins[9] : LOCATION = Pin_75; + misc_pins[9] : IO_STANDARD = LVTTL; + reset : LOCATION = Pin_94; + usbclk : LOCATION = Pin_55; + usbctl[0] : LOCATION = Pin_56; + usbctl[1] : LOCATION = Pin_54; + usbctl[2] : LOCATION = Pin_53; + usbctl[3] : LOCATION = Pin_58; + usbctl[4] : LOCATION = Pin_57; + usbctl[5] : LOCATION = Pin_44; + usbdata[0] : LOCATION = Pin_73; + usbdata[10] : LOCATION = Pin_41; + usbdata[11] : LOCATION = Pin_39; + usbdata[12] : LOCATION = Pin_38; + usbdata[12] : IO_STANDARD = LVTTL; + usbdata[13] : LOCATION = Pin_37; + usbdata[14] : LOCATION = Pin_24; + usbdata[15] : LOCATION = Pin_23; + usbdata[1] : LOCATION = Pin_68; + usbdata[2] : LOCATION = Pin_67; + usbdata[3] : LOCATION = Pin_66; + usbdata[4] : LOCATION = Pin_65; + usbdata[5] : LOCATION = Pin_61; + usbdata[6] : LOCATION = Pin_60; + usbdata[7] : LOCATION = Pin_59; + usbdata[8] : LOCATION = Pin_43; + usbdata[9] : LOCATION = Pin_42; + usbrdy[0] : LOCATION = Pin_45; + usbrdy[1] : LOCATION = Pin_46; + usbrdy[2] : LOCATION = Pin_47; + usbrdy[3] : LOCATION = Pin_48; + usbrdy[4] : LOCATION = Pin_49; + usbrdy[5] : LOCATION = Pin_50; + clear_status : LOCATION = Pin_99; +} diff --git a/fpga/usrp1/toplevel/usrp_multi/usrp_multi.esf b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.esf new file mode 100644 index 000000000..df45f676b --- /dev/null +++ b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.esf @@ -0,0 +1,14 @@ +SIMULATOR_SETTINGS +{ + ESTIMATE_POWER_CONSUMPTION = OFF; + GLITCH_INTERVAL = 1NS; + GLITCH_DETECTION = OFF; + SIMULATION_COVERAGE = ON; + CHECK_OUTPUTS = OFF; + SETUP_HOLD_DETECTION = OFF; + POWER_ESTIMATION_START_TIME = "0 NS"; + ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS = ON; + SIMULATION_MODE = TIMING; + START_TIME = 0NS; + USE_COMPILER_SETTINGS = usrp_multi; +} diff --git a/fpga/usrp1/toplevel/usrp_multi/usrp_multi.psf b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.psf new file mode 100644 index 000000000..68c2d12f9 --- /dev/null +++ b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.psf @@ -0,0 +1,312 @@ +DEFAULT_DESIGN_ASSISTANT_SETTINGS +{ + HCPY_ALOAD_SIGNALS = OFF; + HCPY_VREF_PINS = OFF; + HCPY_CAT = OFF; + HCPY_ILLEGAL_HC_DEV_PKG = OFF; + ACLK_RULE_IMSZER_ADOMAIN = OFF; + ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF; + ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF; + ACLK_CAT = OFF; + SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF; + SIGNALRACE_CAT = OFF; + NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF; + NONSYNCHSTRUCT_RULE_SRLATCH = OFF; + NONSYNCHSTRUCT_RULE_DLATCH = OFF; + NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF; + NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF; + NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF; + NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF; + NONSYNCHSTRUCT_RULE_REG_LOOP = OFF; + NONSYNCHSTRUCT_RULE_COMBLOOP = OFF; + NONSYNCHSTRUCT_CAT = OFF; + NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF; + TIMING_RULE_COIN_CLKEDGE = OFF; + TIMING_RULE_SHIFT_REG = OFF; + TIMING_RULE_HIGH_FANOUTS = OFF; + TIMING_CAT = OFF; + RESET_RULE_ALL = OFF; + RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_REG_ASNYCH = OFF; + RESET_RULE_COMB_ASYNCH_RESET = OFF; + RESET_RULE_IMSYNCH_EXRESET = OFF; + RESET_RULE_UNSYNCH_EXRESET = OFF; + RESET_RULE_INPINS_RESETNET = OFF; + RESET_CAT = OFF; + CLK_RULE_ALL = OFF; + CLK_RULE_MIX_EDGES = OFF; + CLK_RULE_CLKNET_CLKSPINES = OFF; + CLK_RULE_INPINS_CLKNET = OFF; + CLK_RULE_GATING_SCHEME = OFF; + CLK_RULE_INV_CLOCK = OFF; + CLK_RULE_COMB_CLOCK = OFF; + CLK_CAT = OFF; + HCPY_EXCEED_USER_IO_USAGE = OFF; + HCPY_EXCEED_RAM_USAGE = OFF; + NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF; + SIGNALRACE_RULE_TRISTATE = OFF; + ASSG_RULE_MISSING_TIMING = OFF; + ASSG_RULE_MISSING_FMAX = OFF; + ASSG_CAT = OFF; +} +SYNTHESIS_FITTING_SETTINGS +{ + AUTO_SHIFT_REGISTER_RECOGNITION = ON; + AUTO_DSP_RECOGNITION = ON; + AUTO_RAM_RECOGNITION = ON; + REMOVE_DUPLICATE_LOGIC = ON; + AUTO_TURBO_BIT = ON; + AUTO_MERGE_PLLS = ON; + AUTO_OPEN_DRAIN_PINS = ON; + AUTO_PARALLEL_EXPANDERS = ON; + AUTO_FAST_OUTPUT_ENABLE_REGISTERS = OFF; + AUTO_FAST_OUTPUT_REGISTERS = OFF; + AUTO_FAST_INPUT_REGISTERS = OFF; + AUTO_CASCADE_CHAINS = ON; + AUTO_CARRY_CHAINS = ON; + AUTO_DELAY_CHAINS = ON; + MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH = 4; + PARALLEL_EXPANDER_CHAIN_LENGTH = 16; + CASCADE_CHAIN_LENGTH = 2; + STRATIX_CARRY_CHAIN_LENGTH = 70; + MERCURY_CARRY_CHAIN_LENGTH = 48; + FLEX10K_CARRY_CHAIN_LENGTH = 32; + FLEX6K_CARRY_CHAIN_LENGTH = 32; + CARRY_CHAIN_LENGTH = 48; + CARRY_OUT_PINS_LCELL_INSERT = ON; + NORMAL_LCELL_INSERT = ON; + AUTO_LCELL_INSERTION = ON; + ALLOW_XOR_GATE_USAGE = ON; + AUTO_PACKED_REGISTERS_STRATIX = NORMAL; + AUTO_PACKED_REGISTERS = OFF; + AUTO_PACKED_REG_CYCLONE = NORMAL; + FLEX10K_OPTIMIZATION_TECHNIQUE = AREA; + FLEX6K_OPTIMIZATION_TECHNIQUE = AREA; + MERCURY_OPTIMIZATION_TECHNIQUE = AREA; + APEX20K_OPTIMIZATION_TECHNIQUE = SPEED; + MAX7000_OPTIMIZATION_TECHNIQUE = SPEED; + STRATIX_OPTIMIZATION_TECHNIQUE = SPEED; + CYCLONE_OPTIMIZATION_TECHNIQUE = AREA; + FLEX10K_TECHNOLOGY_MAPPER = LUT; + FLEX6K_TECHNOLOGY_MAPPER = LUT; + MERCURY_TECHNOLOGY_MAPPER = LUT; + APEX20K_TECHNOLOGY_MAPPER = LUT; + MAX7000_TECHNOLOGY_MAPPER = "PRODUCT TERM"; + STRATIX_TECHNOLOGY_MAPPER = LUT; + AUTO_IMPLEMENT_IN_ROM = OFF; + AUTO_GLOBAL_MEMORY_CONTROLS = OFF; + AUTO_GLOBAL_REGISTER_CONTROLS = ON; + AUTO_GLOBAL_OE = ON; + AUTO_GLOBAL_CLOCK = ON; + USE_LPM_FOR_AHDL_OPERATORS = ON; + LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF; + ENABLE_BUS_HOLD_CIRCUITRY = OFF; + WEAK_PULL_UP_RESISTOR = OFF; + TURBO_BIT = ON; + MAX7000_IGNORE_SOFT_BUFFERS = OFF; + IGNORE_SOFT_BUFFERS = ON; + MAX7000_IGNORE_LCELL_BUFFERS = AUTO; + IGNORE_LCELL_BUFFERS = OFF; + IGNORE_ROW_GLOBAL_BUFFERS = OFF; + IGNORE_GLOBAL_BUFFERS = OFF; + IGNORE_CASCADE_BUFFERS = OFF; + IGNORE_CARRY_BUFFERS = OFF; + REMOVE_DUPLICATE_REGISTERS = ON; + REMOVE_REDUNDANT_LOGIC_CELLS = OFF; + ALLOW_POWER_UP_DONT_CARE = ON; + PCI_IO = OFF; + NOT_GATE_PUSH_BACK = ON; + SLOW_SLEW_RATE = OFF; + DSP_BLOCK_BALANCING = AUTO; + STATE_MACHINE_PROCESSING = AUTO; +} +DEFAULT_HARDCOPY_SETTINGS +{ + HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS"; +} +DEFAULT_TIMING_REQUIREMENTS +{ + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + RUN_ALL_TIMING_ANALYSES = ON; + IGNORE_CLOCK_SETTINGS = OFF; + DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE"; + CUT_OFF_IO_PIN_FEEDBACK = ON; + CUT_OFF_CLEAR_AND_PRESET_PATHS = ON; + CUT_OFF_READ_DURING_WRITE_PATHS = ON; + CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON; + DO_MIN_ANALYSIS = ON; + DO_MIN_TIMING = OFF; + NUMBER_OF_PATHS_TO_REPORT = 200; + NUMBER_OF_DESTINATION_TO_REPORT = 10; + NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10; + MAX_SCC_SIZE = 50; +} +HDL_SETTINGS +{ + VERILOG_INPUT_VERSION = VERILOG_2001; + ENABLE_IP_DEBUG = OFF; + VHDL_INPUT_VERSION = VHDL93; + VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF; +} +PROJECT_INFO(usrp_multi) +{ + ORIGINAL_QUARTUS_VERSION = 3.0; + PROJECT_CREATION_TIME_DATE = "00:14:04 JULY 13, 2003"; + LAST_QUARTUS_VERSION = 3.0; + SHOW_REGISTRATION_MESSAGE = ON; + USER_LIBRARIES = "e:\usrp\fpga\megacells"; +} +THIRD_PARTY_EDA_TOOLS(usrp_multi) +{ + EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>"; + EDA_SIMULATION_TOOL = "<NONE>"; + EDA_TIMING_ANALYSIS_TOOL = "<NONE>"; + EDA_BOARD_DESIGN_TOOL = "<NONE>"; + EDA_FORMAL_VERIFICATION_TOOL = "<NONE>"; + EDA_RESYNTHESIS_TOOL = "<NONE>"; +} +EDA_TOOL_SETTINGS(eda_design_synthesis) +{ + EDA_INPUT_GND_NAME = GND; + EDA_INPUT_VCC_NAME = VCC; + EDA_SHOW_LMF_MAPPING_MESSAGES = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_INPUT_DATA_FORMAT = EDIF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_simulation) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_timing_analysis) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + EDA_LAUNCH_CMD_LINE_TOOL = OFF; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_board_design) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_formal_verification) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_palace) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + RESYNTHESIS_RETIMING = FULL; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; +} +CLOCK(clk_120mhz) +{ + FMAX_REQUIREMENT = "120.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(usbclk) +{ + FMAX_REQUIREMENT = "48.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(SCLK) +{ + FMAX_REQUIREMENT = "1.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(adclk0) +{ + FMAX_REQUIREMENT = "60.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(adclk1) +{ + FMAX_REQUIREMENT = "60.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} diff --git a/fpga/usrp1/toplevel/usrp_multi/usrp_multi.qpf b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.qpf new file mode 100644 index 000000000..1524de1bb --- /dev/null +++ b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.qpf @@ -0,0 +1,29 @@ +# Copyright (C) 1991-2004 Altera Corporation +# Any megafunction design, and related netlist (encrypted or decrypted), +# support information, device programming or simulation file, and any other +# associated documentation or information provided by Altera or a partner +# under Altera's Megafunction Partnership Program may be used only +# to program PLD devices (but not masked PLD devices) from Altera. Any +# other use of such megafunction design, netlist, support information, +# device programming or simulation file, or any other related documentation +# or information is prohibited for any other purpose, including, but not +# limited to modification, reverse engineering, de-compiling, or use with +# any other silicon devices, unless such use is explicitly licensed under +# a separate agreement with Altera or a megafunction partner. Title to the +# intellectual property, including patents, copyrights, trademarks, trade +# secrets, or maskworks, embodied in any such megafunction design, netlist, +# support information, device programming or simulation file, or any other +# related documentation or information provided by Altera or a megafunction +# partner, remains with Altera, the megafunction partner, or their respective +# licensors. No other licenses, including any licenses needed under any third +# party's intellectual property, are provided herein. + + + +QUARTUS_VERSION = "4.0" +DATE = "17:10:11 December 20, 2004" + + +# Active Revisions + +PROJECT_REVISION = "usrp_multi" diff --git a/fpga/usrp1/toplevel/usrp_multi/usrp_multi.qsf b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.qsf new file mode 100644 index 000000000..9f0efbd83 --- /dev/null +++ b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.qsf @@ -0,0 +1,408 @@ +# Copyright (C) 1991-2005 Altera Corporation
+# Your use of Altera Corporation's design tools, logic functions
+# and other software and tools, and its AMPP partner logic
+# functions, and any output files any of the foregoing
+# (including device programming or simulation files), and any
+# associated documentation or information are expressly subject
+# to the terms and conditions of the Altera Program License
+# Subscription Agreement, Altera MegaCore Function License
+# Agreement, or other applicable license agreement, including,
+# without limitation, that your use is for the sole purpose of
+# programming logic devices manufactured by Altera and sold by
+# Altera or its authorized distributors. Please refer to the
+# applicable agreement for further details.
+
+
+# The default values for assignments are stored in the file
+# usrp_multi_assignment_defaults.qdf
+# If this file doesn't exist, and for assignments not listed, see file
+# assignment_defaults.qdf
+
+# Altera recommends that you do not modify this file. This
+# file is updated automatically by the Quartus II software
+# and any changes you make may be lost or overwritten.
+
+
+# Project-Wide Assignments
+# ========================
+set_global_assignment -name ORIGINAL_QUARTUS_VERSION 3.0
+set_global_assignment -name PROJECT_CREATION_TIME_DATE "00:14:04 JULY 13, 2003"
+set_global_assignment -name LAST_QUARTUS_VERSION 6.1
+
+# Pin & Location Assignments
+# ==========================
+set_global_assignment -name RESERVE_PIN "AS INPUT TRI-STATED"
+set_location_assignment PIN_29 -to SCLK
+set_location_assignment PIN_117 -to SDI
+set_location_assignment PIN_28 -to usbclk
+set_location_assignment PIN_107 -to usbctl[0]
+set_location_assignment PIN_106 -to usbctl[1]
+set_location_assignment PIN_105 -to usbctl[2]
+set_location_assignment PIN_100 -to usbdata[0]
+set_location_assignment PIN_84 -to usbdata[10]
+set_location_assignment PIN_83 -to usbdata[11]
+set_location_assignment PIN_82 -to usbdata[12]
+set_location_assignment PIN_79 -to usbdata[13]
+set_location_assignment PIN_78 -to usbdata[14]
+set_location_assignment PIN_77 -to usbdata[15]
+set_location_assignment PIN_99 -to usbdata[1]
+set_location_assignment PIN_98 -to usbdata[2]
+set_location_assignment PIN_95 -to usbdata[3]
+set_location_assignment PIN_94 -to usbdata[4]
+set_location_assignment PIN_93 -to usbdata[5]
+set_location_assignment PIN_88 -to usbdata[6]
+set_location_assignment PIN_87 -to usbdata[7]
+set_location_assignment PIN_86 -to usbdata[8]
+set_location_assignment PIN_85 -to usbdata[9]
+set_location_assignment PIN_104 -to usbrdy[0]
+set_location_assignment PIN_101 -to usbrdy[1]
+set_location_assignment PIN_76 -to FX2_1
+set_location_assignment PIN_75 -to FX2_2
+set_location_assignment PIN_74 -to FX2_3
+set_location_assignment PIN_116 -to io_rx_a[0]
+set_location_assignment PIN_115 -to io_rx_a[1]
+set_location_assignment PIN_114 -to io_rx_a[2]
+set_location_assignment PIN_113 -to io_rx_a[3]
+set_location_assignment PIN_108 -to io_rx_a[4]
+set_location_assignment PIN_195 -to io_rx_a[5]
+set_location_assignment PIN_196 -to io_rx_a[6]
+set_location_assignment PIN_197 -to io_rx_a[7]
+set_location_assignment PIN_200 -to io_rx_a[8]
+set_location_assignment PIN_201 -to io_rx_a[9]
+set_location_assignment PIN_202 -to io_rx_a[10]
+set_location_assignment PIN_203 -to io_rx_a[11]
+set_location_assignment PIN_206 -to io_rx_a[12]
+set_location_assignment PIN_207 -to io_rx_a[13]
+set_location_assignment PIN_208 -to io_rx_a[14]
+set_location_assignment PIN_214 -to io_rx_b[0]
+set_location_assignment PIN_215 -to io_rx_b[1]
+set_location_assignment PIN_216 -to io_rx_b[2]
+set_location_assignment PIN_217 -to io_rx_b[3]
+set_location_assignment PIN_218 -to io_rx_b[4]
+set_location_assignment PIN_219 -to io_rx_b[5]
+set_location_assignment PIN_222 -to io_rx_b[6]
+set_location_assignment PIN_223 -to io_rx_b[7]
+set_location_assignment PIN_224 -to io_rx_b[8]
+set_location_assignment PIN_225 -to io_rx_b[9]
+set_location_assignment PIN_226 -to io_rx_b[10]
+set_location_assignment PIN_227 -to io_rx_b[11]
+set_location_assignment PIN_228 -to io_rx_b[12]
+set_location_assignment PIN_233 -to io_rx_b[13]
+set_location_assignment PIN_234 -to io_rx_b[14]
+set_location_assignment PIN_175 -to io_tx_a[0]
+set_location_assignment PIN_176 -to io_tx_a[1]
+set_location_assignment PIN_177 -to io_tx_a[2]
+set_location_assignment PIN_178 -to io_tx_a[3]
+set_location_assignment PIN_179 -to io_tx_a[4]
+set_location_assignment PIN_180 -to io_tx_a[5]
+set_location_assignment PIN_181 -to io_tx_a[6]
+set_location_assignment PIN_182 -to io_tx_a[7]
+set_location_assignment PIN_183 -to io_tx_a[8]
+set_location_assignment PIN_184 -to io_tx_a[9]
+set_location_assignment PIN_185 -to io_tx_a[10]
+set_location_assignment PIN_186 -to io_tx_a[11]
+set_location_assignment PIN_187 -to io_tx_a[12]
+set_location_assignment PIN_188 -to io_tx_a[13]
+set_location_assignment PIN_193 -to io_tx_a[14]
+set_location_assignment PIN_73 -to io_tx_b[0]
+set_location_assignment PIN_68 -to io_tx_b[1]
+set_location_assignment PIN_67 -to io_tx_b[2]
+set_location_assignment PIN_66 -to io_tx_b[3]
+set_location_assignment PIN_65 -to io_tx_b[4]
+set_location_assignment PIN_64 -to io_tx_b[5]
+set_location_assignment PIN_63 -to io_tx_b[6]
+set_location_assignment PIN_62 -to io_tx_b[7]
+set_location_assignment PIN_61 -to io_tx_b[8]
+set_location_assignment PIN_60 -to io_tx_b[9]
+set_location_assignment PIN_59 -to io_tx_b[10]
+set_location_assignment PIN_58 -to io_tx_b[11]
+set_location_assignment PIN_57 -to io_tx_b[12]
+set_location_assignment PIN_56 -to io_tx_b[13]
+set_location_assignment PIN_55 -to io_tx_b[14]
+set_location_assignment PIN_152 -to master_clk
+set_location_assignment PIN_144 -to rx_a_a[0]
+set_location_assignment PIN_143 -to rx_a_a[1]
+set_location_assignment PIN_141 -to rx_a_a[2]
+set_location_assignment PIN_140 -to rx_a_a[3]
+set_location_assignment PIN_139 -to rx_a_a[4]
+set_location_assignment PIN_138 -to rx_a_a[5]
+set_location_assignment PIN_137 -to rx_a_a[6]
+set_location_assignment PIN_136 -to rx_a_a[7]
+set_location_assignment PIN_135 -to rx_a_a[8]
+set_location_assignment PIN_134 -to rx_a_a[9]
+set_location_assignment PIN_133 -to rx_a_a[10]
+set_location_assignment PIN_132 -to rx_a_a[11]
+set_location_assignment PIN_23 -to rx_a_b[0]
+set_location_assignment PIN_21 -to rx_a_b[1]
+set_location_assignment PIN_20 -to rx_a_b[2]
+set_location_assignment PIN_19 -to rx_a_b[3]
+set_location_assignment PIN_18 -to rx_a_b[4]
+set_location_assignment PIN_17 -to rx_a_b[5]
+set_location_assignment PIN_16 -to rx_a_b[6]
+set_location_assignment PIN_15 -to rx_a_b[7]
+set_location_assignment PIN_14 -to rx_a_b[8]
+set_location_assignment PIN_13 -to rx_a_b[9]
+set_location_assignment PIN_12 -to rx_a_b[10]
+set_location_assignment PIN_11 -to rx_a_b[11]
+set_location_assignment PIN_131 -to rx_b_a[0]
+set_location_assignment PIN_128 -to rx_b_a[1]
+set_location_assignment PIN_127 -to rx_b_a[2]
+set_location_assignment PIN_126 -to rx_b_a[3]
+set_location_assignment PIN_125 -to rx_b_a[4]
+set_location_assignment PIN_124 -to rx_b_a[5]
+set_location_assignment PIN_123 -to rx_b_a[6]
+set_location_assignment PIN_122 -to rx_b_a[7]
+set_location_assignment PIN_121 -to rx_b_a[8]
+set_location_assignment PIN_120 -to rx_b_a[9]
+set_location_assignment PIN_119 -to rx_b_a[10]
+set_location_assignment PIN_118 -to rx_b_a[11]
+set_location_assignment PIN_8 -to rx_b_b[0]
+set_location_assignment PIN_7 -to rx_b_b[1]
+set_location_assignment PIN_6 -to rx_b_b[2]
+set_location_assignment PIN_5 -to rx_b_b[3]
+set_location_assignment PIN_4 -to rx_b_b[4]
+set_location_assignment PIN_3 -to rx_b_b[5]
+set_location_assignment PIN_2 -to rx_b_b[6]
+set_location_assignment PIN_240 -to rx_b_b[7]
+set_location_assignment PIN_239 -to rx_b_b[8]
+set_location_assignment PIN_238 -to rx_b_b[9]
+set_location_assignment PIN_237 -to rx_b_b[10]
+set_location_assignment PIN_236 -to rx_b_b[11]
+set_location_assignment PIN_156 -to SDO
+set_location_assignment PIN_153 -to SEN_FPGA
+set_location_assignment PIN_159 -to tx_a[0]
+set_location_assignment PIN_160 -to tx_a[1]
+set_location_assignment PIN_161 -to tx_a[2]
+set_location_assignment PIN_162 -to tx_a[3]
+set_location_assignment PIN_163 -to tx_a[4]
+set_location_assignment PIN_164 -to tx_a[5]
+set_location_assignment PIN_165 -to tx_a[6]
+set_location_assignment PIN_166 -to tx_a[7]
+set_location_assignment PIN_167 -to tx_a[8]
+set_location_assignment PIN_168 -to tx_a[9]
+set_location_assignment PIN_169 -to tx_a[10]
+set_location_assignment PIN_170 -to tx_a[11]
+set_location_assignment PIN_173 -to tx_a[12]
+set_location_assignment PIN_174 -to tx_a[13]
+set_location_assignment PIN_38 -to tx_b[0]
+set_location_assignment PIN_39 -to tx_b[1]
+set_location_assignment PIN_41 -to tx_b[2]
+set_location_assignment PIN_42 -to tx_b[3]
+set_location_assignment PIN_43 -to tx_b[4]
+set_location_assignment PIN_44 -to tx_b[5]
+set_location_assignment PIN_45 -to tx_b[6]
+set_location_assignment PIN_46 -to tx_b[7]
+set_location_assignment PIN_47 -to tx_b[8]
+set_location_assignment PIN_48 -to tx_b[9]
+set_location_assignment PIN_49 -to tx_b[10]
+set_location_assignment PIN_50 -to tx_b[11]
+set_location_assignment PIN_53 -to tx_b[12]
+set_location_assignment PIN_54 -to tx_b[13]
+set_location_assignment PIN_158 -to TXSYNC_A
+set_location_assignment PIN_37 -to TXSYNC_B
+set_location_assignment PIN_235 -to io_rx_b[15]
+set_location_assignment PIN_24 -to io_tx_b[15]
+set_location_assignment PIN_213 -to io_rx_a[15]
+set_location_assignment PIN_194 -to io_tx_a[15]
+set_location_assignment PIN_1 -to MYSTERY_SIGNAL
+
+# Timing Assignments
+# ==================
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS OFF
+
+# Analysis & Synthesis Assignments
+# ================================
+set_global_assignment -name SAVE_DISK_SPACE OFF
+set_global_assignment -name DEVICE_FILTER_PACKAGE "ANY QFP"
+set_global_assignment -name DEVICE_FILTER_PIN_COUNT 240
+set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL "<None>"
+set_global_assignment -name FAMILY Cyclone
+set_global_assignment -name CYCLONE_OPTIMIZATION_TECHNIQUE BALANCED
+set_global_assignment -name STRATIX_OPTIMIZATION_TECHNIQUE SPEED
+set_global_assignment -name APEX20K_OPTIMIZATION_TECHNIQUE SPEED
+set_global_assignment -name TOP_LEVEL_ENTITY usrp_multi
+set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF
+set_global_assignment -name USER_LIBRARIES "H:\\usrp-for2.7\\fpga\\megacells"
+set_global_assignment -name AUTO_ENABLE_SMART_COMPILE ON
+
+# Fitter Assignments
+# ==================
+set_global_assignment -name DEVICE EP1C12Q240C8
+set_global_assignment -name CYCLONE_CONFIGURATION_SCHEME "PASSIVE SERIAL"
+set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
+set_global_assignment -name OPTIMIZE_HOLD_TIMING OFF
+set_global_assignment -name OPTIMIZE_TIMING "NORMAL COMPILATION"
+set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING OFF
+set_global_assignment -name IO_PLACEMENT_OPTIMIZATION OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT NORMAL
+set_global_assignment -name INC_PLC_MODE OFF
+set_global_assignment -name ROUTING_BACK_ANNOTATION_MODE OFF
+set_instance_assignment -name IO_STANDARD LVTTL -to usbdata[12]
+set_global_assignment -name STRATIX_DEVICE_IO_STANDARD LVTTL
+set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
+
+# Timing Analysis Assignments
+# ===========================
+set_global_assignment -name MAX_SCC_SIZE 50
+
+# EDA Netlist Writer Assignments
+# ==============================
+set_global_assignment -name EDA_SIMULATION_TOOL "<None>"
+set_global_assignment -name EDA_TIMING_ANALYSIS_TOOL "<NONE>"
+set_global_assignment -name EDA_BOARD_DESIGN_TOOL "<NONE>"
+set_global_assignment -name EDA_FORMAL_VERIFICATION_TOOL "<NONE>"
+set_global_assignment -name EDA_RESYNTHESIS_TOOL "<NONE>"
+
+# Assembler Assignments
+# =====================
+set_global_assignment -name USE_CONFIGURATION_DEVICE OFF
+set_global_assignment -name GENERATE_RBF_FILE ON
+set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT TRI-STATED"
+set_global_assignment -name AUTO_RESTART_CONFIGURATION OFF
+
+# Simulator Assignments
+# =====================
+set_global_assignment -name START_TIME "0 ns"
+set_global_assignment -name GLITCH_INTERVAL "1 ns"
+
+# Design Assistant Assignments
+# ============================
+set_global_assignment -name DRC_REPORT_TOP_FANOUT OFF
+set_global_assignment -name DRC_REPORT_FANOUT_EXCEEDING OFF
+set_global_assignment -name ASSG_CAT OFF
+set_global_assignment -name ASSG_RULE_MISSING_FMAX OFF
+set_global_assignment -name ASSG_RULE_MISSING_TIMING OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_ASYN_RAM OFF
+set_global_assignment -name CLK_CAT OFF
+set_global_assignment -name CLK_RULE_COMB_CLOCK OFF
+set_global_assignment -name CLK_RULE_INV_CLOCK OFF
+set_global_assignment -name CLK_RULE_GATING_SCHEME OFF
+set_global_assignment -name CLK_RULE_INPINS_CLKNET OFF
+set_global_assignment -name CLK_RULE_CLKNET_CLKSPINES OFF
+set_global_assignment -name CLK_RULE_MIX_EDGES OFF
+set_global_assignment -name RESET_CAT OFF
+set_global_assignment -name RESET_RULE_INPINS_RESETNET OFF
+set_global_assignment -name RESET_RULE_UNSYNCH_EXRESET OFF
+set_global_assignment -name RESET_RULE_IMSYNCH_EXRESET OFF
+set_global_assignment -name RESET_RULE_COMB_ASYNCH_RESET OFF
+set_global_assignment -name RESET_RULE_UNSYNCH_ASYNCH_DOMAIN OFF
+set_global_assignment -name RESET_RULE_IMSYNCH_ASYNCH_DOMAIN OFF
+set_global_assignment -name TIMING_CAT OFF
+set_global_assignment -name TIMING_RULE_SHIFT_REG OFF
+set_global_assignment -name TIMING_RULE_COIN_CLKEDGE OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE OFF
+set_global_assignment -name NONSYNCHSTRUCT_CAT OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_COMBLOOP OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_REG_LOOP OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_DELAY_CHAIN OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_RIPPLE_CLK OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_SRLATCH OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED OFF
+set_global_assignment -name SIGNALRACE_CAT OFF
+set_global_assignment -name ACLK_CAT OFF
+set_global_assignment -name ACLK_RULE_NO_SZER_ACLK_DOMAIN OFF
+set_global_assignment -name ACLK_RULE_SZER_BTW_ACLK_DOMAIN OFF
+set_global_assignment -name ACLK_RULE_IMSZER_ADOMAIN OFF
+set_global_assignment -name HCPY_CAT OFF
+set_global_assignment -name HCPY_VREF_PINS OFF
+
+# SignalTap II Assignments
+# ========================
+set_global_assignment -name HUB_ENTITY_NAME SLD_HUB
+set_global_assignment -name HUB_INSTANCE_NAME SLD_HUB_INST
+set_global_assignment -name ENABLE_SIGNALTAP OFF
+
+# LogicLock Region Assignments
+# ============================
+set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF
+
+# -----------------
+# start CLOCK(SCLK)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id SCLK
+set_global_assignment -name FMAX_REQUIREMENT "1 MHz" -section_id SCLK
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS OFF -section_id SCLK
+
+# end CLOCK(SCLK)
+# ---------------
+
+# -----------------------
+# start CLOCK(master_clk)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id master_clk
+set_global_assignment -name FMAX_REQUIREMENT "64 MHz" -section_id master_clk
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS OFF -section_id master_clk
+
+# end CLOCK(master_clk)
+# ---------------------
+
+# -------------------
+# start CLOCK(usbclk)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id usbclk
+set_global_assignment -name FMAX_REQUIREMENT "48 MHz" -section_id usbclk
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS OFF -section_id usbclk
+
+# end CLOCK(usbclk)
+# -----------------
+
+# ----------------------
+# start ENTITY(usrp_multi)
+
+ # Timing Assignments
+ # ==================
+set_instance_assignment -name CLOCK_SETTINGS SCLK -to SCLK
+set_instance_assignment -name CLOCK_SETTINGS usbclk -to usbclk
+set_instance_assignment -name CLOCK_SETTINGS master_clk -to master_clk
+
+# end ENTITY(usrp_multi)
+# --------------------
+
+
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/rssi.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/setting_reg_masked.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/master_control_multi.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/ram16.v
+set_global_assignment -name VERILOG_FILE ../../megacells/fifo_4k.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/acc.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/mult.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/ram16_2sum.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/coeff_rom.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/halfband_decim.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/mac.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/coeff_ram.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/tx_chain.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/rx_dcoffset.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/adc_interface.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/io_pins.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/setting_reg.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/bidir_reg.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cic_int_shifter.v
+set_global_assignment -name VERILOG_FILE ../../megacells/clk_doubler.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/rx_chain.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/gen_sync.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/master_control.v
+set_global_assignment -name VERILOG_FILE ../../megacells/fifo_2k.v
+set_global_assignment -name VERILOG_FILE ../../megacells/bustri.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/rx_buffer.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/tx_buffer.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/phase_acc.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cic_interp.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cic_decim.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cordic_stage.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cordic.v
+set_global_assignment -name VERILOG_FILE usrp_multi.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/clk_divider.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/serial_io.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/strobe_gen.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/sign_extend.v
\ No newline at end of file diff --git a/fpga/usrp1/toplevel/usrp_multi/usrp_multi.v b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.v new file mode 100644 index 000000000..08ae0c2aa --- /dev/null +++ b/fpga/usrp1/toplevel/usrp_multi/usrp_multi.v @@ -0,0 +1,379 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2003,2004,2005,2006 Matt Ettus +// Copyright (C) 2006 Martin Dudok van Heel +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +// Top level module for a full setup with DUCs and DDCs + +// Define DEBUG_OWNS_IO_PINS if we're using the daughterboard i/o pins +// for debugging info. NB, This can kill the m'board and/or d'board if you +// have anything except basic d'boards installed. + +// Uncomment the following to include optional circuitry + +`include "config.vh" +`include "../../common/fpga_regs_common.v" +`include "../../common/fpga_regs_standard.v" + +module usrp_multi +(output MYSTERY_SIGNAL, + input master_clk, + input SCLK, + input SDI, + inout SDO, + input SEN_FPGA, + + input FX2_1, + output FX2_2, + output FX2_3, + + input wire [11:0] rx_a_a, + input wire [11:0] rx_b_a, + input wire [11:0] rx_a_b, + input wire [11:0] rx_b_b, + + output wire [13:0] tx_a, + output wire [13:0] tx_b, + + output wire TXSYNC_A, + output wire TXSYNC_B, + + // USB interface + input usbclk, + input wire [2:0] usbctl, + output wire [1:0] usbrdy, + inout [15:0] usbdata, // NB Careful, inout + + // These are the general purpose i/o's that go to the daughterboard slots + inout wire [15:0] io_tx_a, + inout wire [15:0] io_tx_b, + inout wire [15:0] io_rx_a, + inout wire [15:0] io_rx_b + ); + wire [15:0] debugdata,debugctrl; + assign MYSTERY_SIGNAL = 1'b0; + + wire clk64,clk128; + + wire WR = usbctl[0]; + wire RD = usbctl[1]; + wire OE = usbctl[2]; + + wire have_space, have_pkt_rdy; + assign usbrdy[0] = have_space; + assign usbrdy[1] = have_pkt_rdy; + + wire tx_underrun, rx_overrun; + wire clear_status = FX2_1; + assign FX2_2 = rx_overrun; + assign FX2_3 = tx_underrun; + + wire [15:0] usbdata_out; + + wire [3:0] dac0mux,dac1mux,dac2mux,dac3mux; + + wire tx_realsignals; + wire [3:0] rx_numchan; + wire [2:0] tx_numchan; + + wire [7:0] interp_rate, decim_rate; + wire [15:0] tx_debugbus, rx_debugbus; + + wire enable_tx, enable_rx; + wire reset_data; +`ifdef MULTI_ON + wire sync_rx; + assign reset_data = sync_rx; +`else + assign reset_data = 1'b0; +`endif // `ifdef MULTI_ON + + wire tx_dsp_reset, rx_dsp_reset, tx_bus_reset, rx_bus_reset; + wire [7:0] settings; + + // Tri-state bus macro + bustri bustri( .data(usbdata_out),.enabledt(OE),.tridata(usbdata) ); + + assign clk64 = master_clk; + + wire [15:0] ch0tx,ch1tx,ch2tx,ch3tx; //,ch4tx,ch5tx,ch6tx,ch7tx; + wire [15:0] ch0rx,ch1rx,ch2rx,ch3rx,ch4rx,ch5rx,ch6rx,ch7rx; + + // TX + wire [15:0] i_out_0,i_out_1,q_out_0,q_out_1; + wire [15:0] bb_tx_i0,bb_tx_q0,bb_tx_i1,bb_tx_q1; // bb_tx_i2,bb_tx_q2,bb_tx_i3,bb_tx_q3; + + wire strobe_interp, tx_sample_strobe; + wire tx_empty; + + wire serial_strobe; + wire [6:0] serial_addr; + wire [31:0] serial_data; + + reg [15:0] debug_counter; +`ifdef COUNTER_32BIT_ON + reg [31:0] sample_counter_32bit; +`endif // `ifdef COUNTER_32BIT_ON + reg [15:0] loopback_i_0,loopback_q_0; + + //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Transmit Side +`ifdef TX_ON + assign bb_tx_i0 = ch0tx; + assign bb_tx_q0 = ch1tx; + assign bb_tx_i1 = ch2tx; + assign bb_tx_q1 = ch3tx; + + tx_buffer tx_buffer + ( .usbclk(usbclk),.bus_reset(tx_bus_reset),.reset(tx_dsp_reset), + .usbdata(usbdata),.WR(WR),.have_space(have_space),.tx_underrun(tx_underrun), + .channels({tx_numchan,1'b0}), + .tx_i_0(ch0tx),.tx_q_0(ch1tx), + .tx_i_1(ch2tx),.tx_q_1(ch3tx), + .tx_i_2(),.tx_q_2(), + .tx_i_3(),.tx_q_3(), + .txclk(clk64),.txstrobe(strobe_interp), + .clear_status(clear_status), + .tx_empty(tx_empty), + .debugbus(tx_debugbus) ); + + tx_chain tx_chain_0 + ( .clock(clk64),.reset(tx_dsp_reset),.enable(enable_tx), + .interp_rate(interp_rate),.sample_strobe(tx_sample_strobe), + .interpolator_strobe(strobe_interp),.freq(), + .i_in(bb_tx_i0),.q_in(bb_tx_q0),.i_out(i_out_0),.q_out(q_out_0) ); + + tx_chain tx_chain_1 + ( .clock(clk64),.reset(tx_dsp_reset),.enable(enable_tx), + .interp_rate(interp_rate),.sample_strobe(tx_sample_strobe), + .interpolator_strobe(strobe_interp),.freq(), + .i_in(bb_tx_i1),.q_in(bb_tx_q1),.i_out(i_out_1),.q_out(q_out_1) ); + + setting_reg #(`FR_TX_MUX) + sr_txmux(.clock(clk64),.reset(tx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data), + .out({dac3mux,dac2mux,dac1mux,dac0mux,tx_realsignals,tx_numchan})); + + wire [15:0] tx_a_a = dac0mux[3] ? (dac0mux[1] ? (dac0mux[0] ? q_out_1 : i_out_1) : (dac0mux[0] ? q_out_0 : i_out_0)) : 16'b0; + wire [15:0] tx_b_a = dac1mux[3] ? (dac1mux[1] ? (dac1mux[0] ? q_out_1 : i_out_1) : (dac1mux[0] ? q_out_0 : i_out_0)) : 16'b0; + wire [15:0] tx_a_b = dac2mux[3] ? (dac2mux[1] ? (dac2mux[0] ? q_out_1 : i_out_1) : (dac2mux[0] ? q_out_0 : i_out_0)) : 16'b0; + wire [15:0] tx_b_b = dac3mux[3] ? (dac3mux[1] ? (dac3mux[0] ? q_out_1 : i_out_1) : (dac3mux[0] ? q_out_0 : i_out_0)) : 16'b0; + + wire txsync = tx_sample_strobe; + assign TXSYNC_A = txsync; + assign TXSYNC_B = txsync; + + assign tx_a = txsync ? tx_b_a[15:2] : tx_a_a[15:2]; + assign tx_b = txsync ? tx_b_b[15:2] : tx_a_b[15:2]; +`endif // `ifdef TX_ON + + ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Receive Side +`ifdef RX_ON + wire rx_sample_strobe,strobe_decim,hb_strobe; + wire [15:0] bb_rx_i0,bb_rx_q0,bb_rx_i1,bb_rx_q1, + bb_rx_i2,bb_rx_q2,bb_rx_i3,bb_rx_q3; + + wire loopback = settings[0]; + wire counter = settings[1]; +`ifdef COUNTER_32BIT_ON + wire counter_32bit = settings[2]; + + always @(posedge clk64) + if(rx_dsp_reset) + sample_counter_32bit <= #1 32'd0; + else if(~enable_rx | reset_data) + sample_counter_32bit <=#1 32'd0; + else if(hb_strobe) + sample_counter_32bit <=#1 sample_counter_32bit + 32'd1; +`endif // `ifdef COUNTER_32BIT_ON + + always @(posedge clk64) + if(rx_dsp_reset) + debug_counter <= #1 16'd0; + else if(~enable_rx) + debug_counter <= #1 16'd0; + else if(hb_strobe) + debug_counter <=#1 debug_counter + 16'd2; + + always @(posedge clk64) + if(strobe_interp) + begin + loopback_i_0 <= #1 ch0tx; + loopback_q_0 <= #1 ch1tx; + end + +`ifdef COUNTER_32BIT_ON + assign ch0rx = counter_32bit?sample_counter_32bit[31:16]:counter ? debug_counter : loopback ? loopback_i_0 : bb_rx_i0; + assign ch1rx = counter_32bit?sample_counter_32bit[15:0]:counter ? debug_counter + 16'd1 : loopback ? loopback_q_0 : bb_rx_q0; + assign ch2rx = bb_rx_i1; + assign ch3rx = bb_rx_q1; + assign ch4rx = counter_32bit?bb_rx_i0:bb_rx_i2; + assign ch5rx = counter_32bit?bb_rx_q0:bb_rx_q2;// If using counter replicate channels here to be able to get rx_i0 when using counter + //This means if you use 4 channels that channel 3 will be replaced by channel 0 + // and channel 0 will output the 32 bit counter. + assign ch6rx = bb_rx_i3; + assign ch7rx = bb_rx_q3; +`else + assign ch0rx = counter ? debug_counter : loopback ? loopback_i_0 : bb_rx_i0; + assign ch1rx = counter ? debug_counter + 16'd1 : loopback ? loopback_q_0 : bb_rx_q0; + assign ch2rx = bb_rx_i1; + assign ch3rx = bb_rx_q1; + assign ch4rx = bb_rx_i2; + assign ch5rx = bb_rx_q2; + assign ch6rx = bb_rx_i3; + assign ch7rx = bb_rx_q3; +`endif // `ifdef COUNTER_32BIT_ON + + + wire [15:0] ddc0_in_i,ddc0_in_q,ddc1_in_i,ddc1_in_q,ddc2_in_i,ddc2_in_q,ddc3_in_i,ddc3_in_q; + adc_interface adc_interface(.clock(clk64),.reset(rx_dsp_reset),.enable(1'b1), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .rx_a_a(rx_a_a),.rx_b_a(rx_b_a),.rx_a_b(rx_a_b),.rx_b_b(rx_b_b), + .ddc0_in_i(ddc0_in_i),.ddc0_in_q(ddc0_in_q), + .ddc1_in_i(ddc1_in_i),.ddc1_in_q(ddc1_in_q), + .ddc2_in_i(ddc2_in_i),.ddc2_in_q(ddc2_in_q), + .ddc3_in_i(ddc3_in_i),.ddc3_in_q(ddc3_in_q),.rx_numchan(rx_numchan) ); + + rx_buffer rx_buffer + ( .usbclk(usbclk),.bus_reset(rx_bus_reset),.reset(rx_dsp_reset | reset_data), + .reset_regs(rx_dsp_reset), + .usbdata(usbdata_out),.RD(RD),.have_pkt_rdy(have_pkt_rdy),.rx_overrun(rx_overrun), + .channels(rx_numchan), + .ch_0(ch0rx),.ch_1(ch1rx), + .ch_2(ch2rx),.ch_3(ch3rx), + .ch_4(ch4rx),.ch_5(ch5rx), + .ch_6(ch6rx),.ch_7(ch7rx), + .rxclk(clk64),.rxstrobe(hb_strobe), + .clear_status(clear_status), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .debugbus(rx_debugbus) ); + + `ifdef RX_EN_0 + rx_chain #(`FR_RX_FREQ_0,`FR_RX_PHASE_0) rx_chain_0 + ( .clock(clk64),.reset(reset_data),.enable(enable_rx), + .decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(hb_strobe), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .i_in(ddc0_in_i),.q_in(ddc0_in_q),.i_out(bb_rx_i0),.q_out(bb_rx_q0),.debugdata(debugdata),.debugctrl(debugctrl)); + `else + assign bb_rx_i0=16'd0; + assign bb_rx_q0=16'd0; + `endif + + `ifdef RX_EN_1 + rx_chain #(`FR_RX_FREQ_1,`FR_RX_PHASE_1) rx_chain_1 + ( .clock(clk64),.reset(reset_data),.enable(enable_rx), + .decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .i_in(ddc1_in_i),.q_in(ddc1_in_q),.i_out(bb_rx_i1),.q_out(bb_rx_q1)); + `else + assign bb_rx_i1=16'd0; + assign bb_rx_q1=16'd0; + `endif + + `ifdef RX_EN_2 + rx_chain #(`FR_RX_FREQ_2,`FR_RX_PHASE_2) rx_chain_2 + ( .clock(clk64),.reset(reset_data),.enable(enable_rx), + .decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .i_in(ddc2_in_i),.q_in(ddc2_in_q),.i_out(bb_rx_i2),.q_out(bb_rx_q2)); + `else + assign bb_rx_i2=16'd0; + assign bb_rx_q2=16'd0; + `endif + + `ifdef RX_EN_3 + rx_chain #(`FR_RX_FREQ_3,`FR_RX_PHASE_3) rx_chain_3 + ( .clock(clk64),.reset(reset_data),.enable(enable_rx), + .decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .i_in(ddc3_in_i),.q_in(ddc3_in_q),.i_out(bb_rx_i3),.q_out(bb_rx_q3)); + assign bb_rx_i3=16'd0; + assign bb_rx_q3=16'd0; + `endif + +`endif // `ifdef RX_ON + + /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Control Functions + + wire [31:0] capabilities; + assign capabilities[7] = `TX_CAP_HB; + assign capabilities[6:4] = `TX_CAP_NCHAN; + assign capabilities[3] = `RX_CAP_HB; + assign capabilities[2:0] = `RX_CAP_NCHAN; + + + serial_io serial_io + ( .master_clk(clk64),.serial_clock(SCLK),.serial_data_in(SDI), + .enable(SEN_FPGA),.reset(1'b0),.serial_data_out(SDO), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .readback_0({io_rx_a,io_tx_a}),.readback_1({io_rx_b,io_tx_b}),.readback_2(capabilities),.readback_3(32'hf0f0931a) ); + + wire [15:0] reg_0,reg_1,reg_2,reg_3; + +`ifdef MULTI_ON + + master_control_multi master_control + ( .master_clk(clk64),.usbclk(usbclk), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .rx_slave_sync(io_rx_a[`bitnoFR_RX_SYNC_INPUT_IOPIN]), + .tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset), + .tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset), + .enable_tx(enable_tx),.enable_rx(enable_rx), + .sync_rx(sync_rx), + .interp_rate(interp_rate),.decim_rate(decim_rate), + .tx_sample_strobe(tx_sample_strobe),.strobe_interp(strobe_interp), + .rx_sample_strobe(rx_sample_strobe),.strobe_decim(strobe_decim), + .tx_empty(tx_empty), + //.debug_0(rx_a_a),.debug_1(ddc0_in_i), + .debug_0(rx_debugbus),.debug_1(ddc0_in_i), + .debug_2({rx_sample_strobe,strobe_decim,serial_strobe,serial_addr}),.debug_3({rx_dsp_reset,tx_dsp_reset,rx_bus_reset,tx_bus_reset,enable_rx,tx_underrun,rx_overrun,decim_rate}), + .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3) ); + +`else //`ifdef MULTI_ON + + master_control master_control + ( .master_clk(clk64),.usbclk(usbclk), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset), + .tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset), + .enable_tx(enable_tx),.enable_rx(enable_rx), + .interp_rate(interp_rate),.decim_rate(decim_rate), + .tx_sample_strobe(tx_sample_strobe),.strobe_interp(strobe_interp), + .rx_sample_strobe(rx_sample_strobe),.strobe_decim(strobe_decim), + .tx_empty(tx_empty), + //.debug_0(rx_a_a),.debug_1(ddc0_in_i), + .debug_0(rx_debugbus),.debug_1(ddc0_in_i), + .debug_2({rx_sample_strobe,strobe_decim,serial_strobe,serial_addr}),.debug_3({rx_dsp_reset,tx_dsp_reset,rx_bus_reset,tx_bus_reset,enable_rx,tx_underrun,rx_overrun,decim_rate}), + .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3) ); + +`endif //`ifdef MULTI_ON + + io_pins io_pins + (.io_0(io_tx_a),.io_1(io_rx_a),.io_2(io_tx_b),.io_3(io_rx_b), + .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3), + .clock(clk64),.rx_reset(rx_dsp_reset),.tx_reset(tx_dsp_reset), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe)); + + //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Misc Settings + setting_reg #(`FR_MODE) sr_misc(.clock(clk64),.reset(rx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(settings)); + +endmodule // usrp_multi |