diff options
Diffstat (limited to 'fpga/usrp1/toplevel/sizetest')
| -rw-r--r-- | fpga/usrp1/toplevel/sizetest/.gitignore | 15 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/sizetest/sizetest.csf | 160 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/sizetest/sizetest.psf | 228 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/sizetest/sizetest.quartus | 19 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/sizetest/sizetest.ssf | 14 | ||||
| -rw-r--r-- | fpga/usrp1/toplevel/sizetest/sizetest.v | 39 |
6 files changed, 475 insertions, 0 deletions
diff --git a/fpga/usrp1/toplevel/sizetest/.gitignore b/fpga/usrp1/toplevel/sizetest/.gitignore new file mode 100644 index 000000000..201434ddc --- /dev/null +++ b/fpga/usrp1/toplevel/sizetest/.gitignore @@ -0,0 +1,15 @@ +/*.qws +/*.eqn +/*.done +/*.htm +/*.rpt +/*.ini +/*.fsf +/*.jam +/*.jbc +/*.pin +/*.pof +/*.sof +/*.rbf +/*.ttf +/db diff --git a/fpga/usrp1/toplevel/sizetest/sizetest.csf b/fpga/usrp1/toplevel/sizetest/sizetest.csf new file mode 100644 index 000000000..4b724e7f5 --- /dev/null +++ b/fpga/usrp1/toplevel/sizetest/sizetest.csf @@ -0,0 +1,160 @@ +COMPILER_SETTINGS +{ + IO_PLACEMENT_OPTIMIZATION = OFF; + ENABLE_DRC_SETTINGS = OFF; + PHYSICAL_SYNTHESIS_REGISTER_RETIMING = OFF; + PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION = OFF; + PHYSICAL_SYNTHESIS_COMBO_LOGIC = OFF; + DRC_FANOUT_EXCEEDING = 30; + DRC_REPORT_FANOUT_EXCEEDING = OFF; + DRC_TOP_FANOUT = 50; + DRC_REPORT_TOP_FANOUT = OFF; + RUN_DRC_DURING_COMPILATION = OFF; + ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON; + ADV_NETLIST_OPT_SYNTH_USE_FITTER_INFO = OFF; + ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF; + ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF; + SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF; + MERGE_HEX_FILE = OFF; + TRUE_WYSIWYG_FLOW = OFF; + SEED = 1; + FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY; + FAMILY = Cyclone; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB"; + DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4"; + DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS"; + DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS"; + DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS"; + STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2"; + STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1"; + FAST_FIT_COMPILATION = OFF; + SIGNALPROBE_DURING_NORMAL_COMPILATION = OFF; + OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = OFF; + OPTIMIZE_TIMING = OFF; + OPTIMIZE_HOLD_TIMING = OFF; + COMPILATION_LEVEL = FULL; + SAVE_DISK_SPACE = ON; + SPEED_DISK_USAGE_TRADEOFF = NORMAL; + LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF; + SIGNALPROBE_ALLOW_OVERUSE = OFF; + FOCUS_ENTITY_NAME = |sizetest; + FIT_ONLY_ONE_ATTEMPT = OFF; +} +DEFAULT_DEVICE_OPTIONS +{ + GENERATE_CONFIG_HEXOUT_FILE = OFF; + GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_JBC_FILE = OFF; + GENERATE_CONFIG_JAM_FILE = OFF; + GENERATE_CONFIG_ISC_FILE = OFF; + GENERATE_CONFIG_SVF_FILE = OFF; + GENERATE_JBC_FILE_COMPRESSED = ON; + GENERATE_JBC_FILE = OFF; + GENERATE_JAM_FILE = OFF; + GENERATE_ISC_FILE = OFF; + GENERATE_SVF_FILE = OFF; + RESERVE_PIN = "AS INPUT TRI-STATED"; + RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND"; + HEXOUT_FILE_COUNT_DIRECTION = UP; + HEXOUT_FILE_START_ADDRESS = 0; + GENERATE_HEX_FILE = OFF; + GENERATE_RBF_FILE = OFF; + GENERATE_TTF_FILE = OFF; + RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED"; + RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF; + AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON; + EPROM_USE_CHECKSUM_AS_USERCODE = OFF; + FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIGURATION_DEVICE = AUTO; + CYCLONE_CONFIGURATION_DEVICE = AUTO; + FLEX10K_CONFIGURATION_DEVICE = AUTO; + FLEX6K_CONFIGURATION_DEVICE = AUTO; + MERCURY_CONFIGURATION_DEVICE = AUTO; + EXCALIBUR_CONFIGURATION_DEVICE = AUTO; + APEX20K_CONFIGURATION_DEVICE = AUTO; + USE_CONFIGURATION_DEVICE = ON; + ENABLE_INIT_DONE_OUTPUT = OFF; + FLEX10K_ENABLE_LOCK_OUTPUT = OFF; + ENABLE_DEVICE_WIDE_OE = OFF; + ENABLE_DEVICE_WIDE_RESET = OFF; + RELEASE_CLEARS_BEFORE_TRI_STATES = OFF; + AUTO_RESTART_CONFIGURATION = OFF; + ENABLE_VREFB_PIN = OFF; + ENABLE_VREFA_PIN = OFF; + SECURITY_BIT = OFF; + USER_START_UP_CLOCK = OFF; + APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + CYCLONE_CONFIGURATION_SCHEME = "ACTIVE SERIAL"; + STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + STRATIX_UPDATE_MODE = STANDARD; + USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_JTAG_USER_CODE = 7F; + MERCURY_JTAG_USER_CODE = FFFFFFFF; + APEX20K_JTAG_USER_CODE = FFFFFFFF; + STRATIX_JTAG_USER_CODE = FFFFFFFF; + MAX7000S_JTAG_USER_CODE = FFFF; + RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF; + ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + MAX7000_ENABLE_JTAG_BST_SUPPORT = ON; + ENABLE_JTAG_BST_SUPPORT = OFF; + CONFIGURATION_CLOCK_DIVISOR = 1; + CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ"; + CLOCK_SOURCE = INTERNAL; + COMPRESSION_MODE = OFF; + ON_CHIP_BITSTREAM_DECOMPRESSION = OFF; +} +AUTO_SLD_HUB_ENTITY +{ + AUTO_INSERT_SLD_HUB_ENTITY = ENABLE; + HUB_INSTANCE_NAME = SLD_HUB_INST; + HUB_ENTITY_NAME = SLD_HUB; +} +CHIP(sizetest) +{ + DEVICE = EP1C12Q240C8; + DEVICE_FILTER_PACKAGE = "ANY QFP"; + DEVICE_FILTER_PIN_COUNT = 240; + DEVICE_FILTER_SPEED_GRADE = ANY; +} +SIGNALTAP_LOGIC_ANALYZER_SETTINGS +{ + ENABLE_SIGNALTAP = Off; + AUTO_ENABLE_SMART_COMPILE = On; +} diff --git a/fpga/usrp1/toplevel/sizetest/sizetest.psf b/fpga/usrp1/toplevel/sizetest/sizetest.psf new file mode 100644 index 000000000..e4fc6aa27 --- /dev/null +++ b/fpga/usrp1/toplevel/sizetest/sizetest.psf @@ -0,0 +1,228 @@ +DEFAULT_DESIGN_ASSISTANT_SETTINGS +{ + HCPY_ALOAD_SIGNALS = OFF; + HCPY_VREF_PINS = OFF; + HCPY_CAT = OFF; + HCPY_ILLEGAL_HC_DEV_PKG = OFF; + ACLK_RULE_IMSZER_ADOMAIN = OFF; + ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF; + ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF; + ACLK_CAT = OFF; + SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF; + SIGNALRACE_CAT = OFF; + NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF; + NONSYNCHSTRUCT_RULE_SRLATCH = OFF; + NONSYNCHSTRUCT_RULE_DLATCH = OFF; + NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF; + NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF; + NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF; + NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF; + NONSYNCHSTRUCT_RULE_REG_LOOP = OFF; + NONSYNCHSTRUCT_RULE_COMBLOOP = OFF; + NONSYNCHSTRUCT_CAT = OFF; + NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF; + TIMING_RULE_COIN_CLKEDGE = OFF; + TIMING_RULE_SHIFT_REG = OFF; + TIMING_RULE_HIGH_FANOUTS = OFF; + TIMING_CAT = OFF; + RESET_RULE_ALL = OFF; + RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_REG_ASNYCH = OFF; + RESET_RULE_COMB_ASYNCH_RESET = OFF; + RESET_RULE_IMSYNCH_EXRESET = OFF; + RESET_RULE_UNSYNCH_EXRESET = OFF; + RESET_RULE_INPINS_RESETNET = OFF; + RESET_CAT = OFF; + CLK_RULE_ALL = OFF; + CLK_RULE_MIX_EDGES = OFF; + CLK_RULE_CLKNET_CLKSPINES = OFF; + CLK_RULE_INPINS_CLKNET = OFF; + CLK_RULE_GATING_SCHEME = OFF; + CLK_RULE_INV_CLOCK = OFF; + CLK_RULE_COMB_CLOCK = OFF; + CLK_CAT = OFF; + HCPY_EXCEED_USER_IO_USAGE = OFF; + HCPY_EXCEED_RAM_USAGE = OFF; + NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF; + SIGNALRACE_RULE_TRISTATE = OFF; + ASSG_RULE_MISSING_TIMING = OFF; + ASSG_RULE_MISSING_FMAX = OFF; + ASSG_CAT = OFF; +} +SYNTHESIS_FITTING_SETTINGS +{ + AUTO_SHIFT_REGISTER_RECOGNITION = ON; + AUTO_RAM_RECOGNITION = ON; + REMOVE_DUPLICATE_LOGIC = ON; + AUTO_MERGE_PLLS = ON; + AUTO_OPEN_DRAIN_PINS = ON; + AUTO_CARRY_CHAINS = ON; + AUTO_DELAY_CHAINS = ON; + STRATIX_CARRY_CHAIN_LENGTH = 70; + AUTO_PACKED_REG_CYCLONE = "MINIMIZE AREA WITH CHAINS"; + CYCLONE_OPTIMIZATION_TECHNIQUE = SPEED; + AUTO_GLOBAL_MEMORY_CONTROLS = OFF; + AUTO_GLOBAL_REGISTER_CONTROLS = ON; + AUTO_GLOBAL_CLOCK = ON; + LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF; + ENABLE_BUS_HOLD_CIRCUITRY = OFF; + WEAK_PULL_UP_RESISTOR = OFF; + IGNORE_SOFT_BUFFERS = ON; + IGNORE_LCELL_BUFFERS = OFF; + IGNORE_ROW_GLOBAL_BUFFERS = OFF; + IGNORE_GLOBAL_BUFFERS = OFF; + IGNORE_CASCADE_BUFFERS = OFF; + IGNORE_CARRY_BUFFERS = OFF; + REMOVE_DUPLICATE_REGISTERS = ON; + REMOVE_REDUNDANT_LOGIC_CELLS = OFF; + ALLOW_POWER_UP_DONT_CARE = ON; + PCI_IO = OFF; + NOT_GATE_PUSH_BACK = ON; + SLOW_SLEW_RATE = OFF; + STATE_MACHINE_PROCESSING = AUTO; +} +DEFAULT_HARDCOPY_SETTINGS +{ + HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS"; +} +DEFAULT_TIMING_REQUIREMENTS +{ + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + RUN_ALL_TIMING_ANALYSES = ON; + IGNORE_CLOCK_SETTINGS = OFF; + DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE"; + CUT_OFF_IO_PIN_FEEDBACK = ON; + CUT_OFF_CLEAR_AND_PRESET_PATHS = ON; + CUT_OFF_READ_DURING_WRITE_PATHS = ON; + CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON; + DO_MIN_ANALYSIS = ON; + DO_MIN_TIMING = OFF; + NUMBER_OF_PATHS_TO_REPORT = 200; + NUMBER_OF_DESTINATION_TO_REPORT = 10; + NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10; + MAX_SCC_SIZE = 50; +} +HDL_SETTINGS +{ + VERILOG_INPUT_VERSION = VERILOG_2001; + ENABLE_IP_DEBUG = OFF; + VHDL_INPUT_VERSION = VHDL93; + VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF; +} +PROJECT_INFO(sizetest) +{ + USER_LIBRARIES = "e:\fpga\megacells\"; + ORIGINAL_QUARTUS_VERSION = 3.0; + PROJECT_CREATION_TIME_DATE = "22:00:25 SEPTEMBER 28, 2003"; + LAST_QUARTUS_VERSION = 3.0; + SHOW_REGISTRATION_MESSAGE = ON; +} +THIRD_PARTY_EDA_TOOLS(sizetest) +{ + EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>"; + EDA_SIMULATION_TOOL = "<NONE>"; + EDA_TIMING_ANALYSIS_TOOL = "<NONE>"; + EDA_BOARD_DESIGN_TOOL = "<NONE>"; + EDA_FORMAL_VERIFICATION_TOOL = "<NONE>"; + EDA_RESYNTHESIS_TOOL = "<NONE>"; +} +EDA_TOOL_SETTINGS(eda_design_synthesis) +{ + EDA_INPUT_GND_NAME = GND; + EDA_INPUT_VCC_NAME = VCC; + EDA_SHOW_LMF_MAPPING_MESSAGES = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_INPUT_DATA_FORMAT = EDIF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_simulation) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_timing_analysis) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + EDA_LAUNCH_CMD_LINE_TOOL = OFF; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_board_design) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_formal_verification) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_palace) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + RESYNTHESIS_RETIMING = FULL; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; +} diff --git a/fpga/usrp1/toplevel/sizetest/sizetest.quartus b/fpga/usrp1/toplevel/sizetest/sizetest.quartus new file mode 100644 index 000000000..d1eaf227a --- /dev/null +++ b/fpga/usrp1/toplevel/sizetest/sizetest.quartus @@ -0,0 +1,19 @@ +COMPILER_SETTINGS_LIST +{ + COMPILER_SETTINGS = sizetest; +} +SIMULATOR_SETTINGS_LIST +{ + SIMULATOR_SETTINGS = sizetest; +} +SOFTWARE_SETTINGS_LIST +{ + SOFTWARE_SETTINGS = Debug; + SOFTWARE_SETTINGS = Release; +} +FILES +{ + VERILOG_FILE = ..\..\sdr_lib\cordic_stage.v; + VERILOG_FILE = ..\..\sdr_lib\cordic.v; + VERILOG_FILE = sizetest.v; +} diff --git a/fpga/usrp1/toplevel/sizetest/sizetest.ssf b/fpga/usrp1/toplevel/sizetest/sizetest.ssf new file mode 100644 index 000000000..1aceab1f1 --- /dev/null +++ b/fpga/usrp1/toplevel/sizetest/sizetest.ssf @@ -0,0 +1,14 @@ +SIMULATOR_SETTINGS +{ + ESTIMATE_POWER_CONSUMPTION = OFF; + GLITCH_INTERVAL = 1NS; + GLITCH_DETECTION = OFF; + SIMULATION_COVERAGE = ON; + CHECK_OUTPUTS = OFF; + SETUP_HOLD_DETECTION = OFF; + POWER_ESTIMATION_START_TIME = "0 NS"; + ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS = ON; + SIMULATION_MODE = TIMING; + START_TIME = 0NS; + USE_COMPILER_SETTINGS = sizetest; +} diff --git a/fpga/usrp1/toplevel/sizetest/sizetest.v b/fpga/usrp1/toplevel/sizetest/sizetest.v new file mode 100644 index 000000000..5a847b961 --- /dev/null +++ b/fpga/usrp1/toplevel/sizetest/sizetest.v @@ -0,0 +1,39 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2003 Matt Ettus +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + + +module sizetest(input clock, + input reset, + input enable, + input [15:0]xi, + input [15:0] yi, + input [15:0] zi, + output [15:0] xo, + output [15:0] yo, + output [15:0] zo +// input [15:0] constant + ); + +wire [16:0] zo; + +cordic_stage cordic_stage(clock, reset, enable, xi, yi, zi, 16'd16383, xo, yo, zo ); + +endmodule |