summaryrefslogtreecommitdiffstats
path: root/fpga/usrp1/sdr_lib
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp1/sdr_lib')
-rw-r--r--fpga/usrp1/sdr_lib/.gitignore2
-rw-r--r--fpga/usrp1/sdr_lib/adc_interface.v71
-rw-r--r--fpga/usrp1/sdr_lib/atr_delay.v83
-rw-r--r--fpga/usrp1/sdr_lib/bidir_reg.v29
-rw-r--r--fpga/usrp1/sdr_lib/cic_dec_shifter.v100
-rwxr-xr-xfpga/usrp1/sdr_lib/cic_decim.v93
-rw-r--r--fpga/usrp1/sdr_lib/cic_int_shifter.v94
-rwxr-xr-xfpga/usrp1/sdr_lib/cic_interp.v90
-rwxr-xr-xfpga/usrp1/sdr_lib/clk_divider.v43
-rwxr-xr-xfpga/usrp1/sdr_lib/cordic.v109
-rwxr-xr-xfpga/usrp1/sdr_lib/cordic_stage.v60
-rwxr-xr-xfpga/usrp1/sdr_lib/ddc.v97
-rw-r--r--fpga/usrp1/sdr_lib/dpram.v47
-rwxr-xr-xfpga/usrp1/sdr_lib/duc.v95
-rw-r--r--fpga/usrp1/sdr_lib/ext_fifo.v126
-rwxr-xr-xfpga/usrp1/sdr_lib/gen_cordic_consts.py10
-rw-r--r--fpga/usrp1/sdr_lib/gen_sync.v43
-rw-r--r--fpga/usrp1/sdr_lib/hb/acc.v22
-rw-r--r--fpga/usrp1/sdr_lib/hb/coeff_rom.v19
-rw-r--r--fpga/usrp1/sdr_lib/hb/halfband_decim.v163
-rw-r--r--fpga/usrp1/sdr_lib/hb/halfband_interp.v121
-rw-r--r--fpga/usrp1/sdr_lib/hb/hbd_tb/HBD80
-rw-r--r--fpga/usrp1/sdr_lib/hb/hbd_tb/really_golden142
-rw-r--r--fpga/usrp1/sdr_lib/hb/hbd_tb/regression95
-rwxr-xr-xfpga/usrp1/sdr_lib/hb/hbd_tb/run_hbd4
-rw-r--r--fpga/usrp1/sdr_lib/hb/hbd_tb/test_hbd.v75
-rw-r--r--fpga/usrp1/sdr_lib/hb/mac.v58
-rw-r--r--fpga/usrp1/sdr_lib/hb/mult.v16
-rw-r--r--fpga/usrp1/sdr_lib/hb/ram16_2port.v22
-rw-r--r--fpga/usrp1/sdr_lib/hb/ram16_2sum.v27
-rw-r--r--fpga/usrp1/sdr_lib/hb/ram32_2sum.v22
-rw-r--r--fpga/usrp1/sdr_lib/io_pins.v52
-rw-r--r--fpga/usrp1/sdr_lib/master_control.v163
-rw-r--r--fpga/usrp1/sdr_lib/master_control_multi.v73
-rwxr-xr-xfpga/usrp1/sdr_lib/phase_acc.v52
-rw-r--r--fpga/usrp1/sdr_lib/ram.v16
-rw-r--r--fpga/usrp1/sdr_lib/ram16.v17
-rw-r--r--fpga/usrp1/sdr_lib/ram32.v17
-rw-r--r--fpga/usrp1/sdr_lib/ram64.v16
-rw-r--r--fpga/usrp1/sdr_lib/rssi.v30
-rw-r--r--fpga/usrp1/sdr_lib/rx_buffer.v237
-rw-r--r--fpga/usrp1/sdr_lib/rx_chain.v106
-rw-r--r--fpga/usrp1/sdr_lib/rx_chain_dual.v103
-rw-r--r--fpga/usrp1/sdr_lib/rx_dcoffset.v22
-rw-r--r--fpga/usrp1/sdr_lib/serial_io.v118
-rw-r--r--fpga/usrp1/sdr_lib/setting_reg.v23
-rw-r--r--fpga/usrp1/sdr_lib/setting_reg_masked.v26
-rw-r--r--fpga/usrp1/sdr_lib/sign_extend.v35
-rw-r--r--fpga/usrp1/sdr_lib/strobe_gen.v46
-rw-r--r--fpga/usrp1/sdr_lib/tx_buffer.v170
-rw-r--r--fpga/usrp1/sdr_lib/tx_chain.v65
-rw-r--r--fpga/usrp1/sdr_lib/tx_chain_hb.v76
52 files changed, 3521 insertions, 0 deletions
diff --git a/fpga/usrp1/sdr_lib/.gitignore b/fpga/usrp1/sdr_lib/.gitignore
new file mode 100644
index 000000000..e7fc78c42
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/.gitignore
@@ -0,0 +1,2 @@
+/db
+/*.vcd
diff --git a/fpga/usrp1/sdr_lib/adc_interface.v b/fpga/usrp1/sdr_lib/adc_interface.v
new file mode 100644
index 000000000..f18ffc104
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/adc_interface.v
@@ -0,0 +1,71 @@
+
+
+`include "../../firmware/include/fpga_regs_common.v"
+`include "../../firmware/include/fpga_regs_standard.v"
+
+module adc_interface
+ (input clock, input reset, input enable,
+ input wire [6:0] serial_addr, input wire [31:0] serial_data, input serial_strobe,
+ input wire [11:0] rx_a_a, input wire [11:0] rx_b_a, input wire [11:0] rx_a_b, input wire [11:0] rx_b_b,
+ output wire [31:0] rssi_0, output wire [31:0] rssi_1, output wire [31:0] rssi_2, output wire [31:0] rssi_3,
+ output reg [15:0] ddc0_in_i, output reg [15:0] ddc0_in_q,
+ output reg [15:0] ddc1_in_i, output reg [15:0] ddc1_in_q,
+ output reg [15:0] ddc2_in_i, output reg [15:0] ddc2_in_q,
+ output reg [15:0] ddc3_in_i, output reg [15:0] ddc3_in_q,
+ output wire [3:0] rx_numchan);
+
+ // Buffer at input to chip
+ reg [11:0] adc0,adc1,adc2,adc3;
+ always @(posedge clock)
+ begin
+ adc0 <= #1 rx_a_a;
+ adc1 <= #1 rx_b_a;
+ adc2 <= #1 rx_a_b;
+ adc3 <= #1 rx_b_b;
+ end
+
+ // then scale and subtract dc offset
+ wire [3:0] dco_en;
+ wire [15:0] adc0_corr,adc1_corr,adc2_corr,adc3_corr;
+
+ setting_reg #(`FR_DC_OFFSET_CL_EN) sr_dco_en(.clock(clock),.reset(reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),
+ .out(dco_en));
+
+ rx_dcoffset #(`FR_ADC_OFFSET_0) rx_dcoffset0(.clock(clock),.enable(dco_en[0]),.reset(reset),.adc_in({adc0[11],adc0,3'b0}),.adc_out(adc0_corr),
+ .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe));
+ rx_dcoffset #(`FR_ADC_OFFSET_1) rx_dcoffset1(.clock(clock),.enable(dco_en[1]),.reset(reset),.adc_in({adc1[11],adc1,3'b0}),.adc_out(adc1_corr),
+ .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe));
+ rx_dcoffset #(`FR_ADC_OFFSET_2) rx_dcoffset2(.clock(clock),.enable(dco_en[2]),.reset(reset),.adc_in({adc2[11],adc2,3'b0}),.adc_out(adc2_corr),
+ .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe));
+ rx_dcoffset #(`FR_ADC_OFFSET_3) rx_dcoffset3(.clock(clock),.enable(dco_en[3]),.reset(reset),.adc_in({adc3[11],adc3,3'b0}),.adc_out(adc3_corr),
+ .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe));
+
+ // Level sensing for AGC
+ rssi rssi_block_0 (.clock(clock),.reset(reset),.enable(enable),.adc(adc0),.rssi(rssi_0[15:0]),.over_count(rssi_0[31:16]));
+ rssi rssi_block_1 (.clock(clock),.reset(reset),.enable(enable),.adc(adc1),.rssi(rssi_1[15:0]),.over_count(rssi_1[31:16]));
+ rssi rssi_block_2 (.clock(clock),.reset(reset),.enable(enable),.adc(adc2),.rssi(rssi_2[15:0]),.over_count(rssi_2[31:16]));
+ rssi rssi_block_3 (.clock(clock),.reset(reset),.enable(enable),.adc(adc3),.rssi(rssi_3[15:0]),.over_count(rssi_3[31:16]));
+
+ // And mux to the appropriate outputs
+ wire [3:0] ddc3mux,ddc2mux,ddc1mux,ddc0mux;
+ wire rx_realsignals;
+
+ setting_reg #(`FR_RX_MUX) sr_rxmux(.clock(clock),.reset(reset),.strobe(serial_strobe),.addr(serial_addr),
+ .in(serial_data),.out({ddc3mux,ddc2mux,ddc1mux,ddc0mux,rx_realsignals,rx_numchan[3:1]}));
+ assign rx_numchan[0] = 1'b0;
+
+ always @(posedge clock)
+ begin
+ ddc0_in_i <= #1 ddc0mux[1] ? (ddc0mux[0] ? adc3_corr : adc2_corr) : (ddc0mux[0] ? adc1_corr : adc0_corr);
+ ddc0_in_q <= #1 rx_realsignals ? 16'd0 : ddc0mux[3] ? (ddc0mux[2] ? adc3_corr : adc2_corr) : (ddc0mux[2] ? adc1_corr : adc0_corr);
+ ddc1_in_i <= #1 ddc1mux[1] ? (ddc1mux[0] ? adc3_corr : adc2_corr) : (ddc1mux[0] ? adc1_corr : adc0_corr);
+ ddc1_in_q <= #1 rx_realsignals ? 16'd0 : ddc1mux[3] ? (ddc1mux[2] ? adc3_corr : adc2_corr) : (ddc1mux[2] ? adc1_corr : adc0_corr);
+ ddc2_in_i <= #1 ddc2mux[1] ? (ddc2mux[0] ? adc3_corr : adc2_corr) : (ddc2mux[0] ? adc1_corr : adc0_corr);
+ ddc2_in_q <= #1 rx_realsignals ? 16'd0 : ddc2mux[3] ? (ddc2mux[2] ? adc3_corr : adc2_corr) : (ddc2mux[2] ? adc1_corr : adc0_corr);
+ ddc3_in_i <= #1 ddc3mux[1] ? (ddc3mux[0] ? adc3_corr : adc2_corr) : (ddc3mux[0] ? adc1_corr : adc0_corr);
+ ddc3_in_q <= #1 rx_realsignals ? 16'd0 : ddc3mux[3] ? (ddc3mux[2] ? adc3_corr : adc2_corr) : (ddc3mux[2] ? adc1_corr : adc0_corr);
+ end
+
+endmodule // adc_interface
+
+
diff --git a/fpga/usrp1/sdr_lib/atr_delay.v b/fpga/usrp1/sdr_lib/atr_delay.v
new file mode 100644
index 000000000..bbba9e291
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/atr_delay.v
@@ -0,0 +1,83 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module atr_delay(clk_i,rst_i,ena_i,tx_empty_i,tx_delay_i,rx_delay_i,atr_tx_o);
+ input clk_i;
+ input rst_i;
+ input ena_i;
+ input tx_empty_i;
+ input [11:0] tx_delay_i;
+ input [11:0] rx_delay_i;
+ output atr_tx_o;
+
+ reg [3:0] state;
+ reg [11:0] count;
+
+ `define ST_RX_DELAY 4'b0001
+ `define ST_RX 4'b0010
+ `define ST_TX_DELAY 4'b0100
+ `define ST_TX 4'b1000
+
+ always @(posedge clk_i)
+ if (rst_i | ~ena_i)
+ begin
+ state <= `ST_RX;
+ count <= 12'b0;
+ end
+ else
+ case (state)
+ `ST_RX:
+ if (!tx_empty_i)
+ begin
+ state <= `ST_TX_DELAY;
+ count <= tx_delay_i;
+ end
+
+ `ST_TX_DELAY:
+ if (count == 0)
+ state <= `ST_TX;
+ else
+ count <= count - 1;
+
+ `ST_TX:
+ if (tx_empty_i)
+ begin
+ state <= `ST_RX_DELAY;
+ count <= rx_delay_i;
+ end
+
+ `ST_RX_DELAY:
+ if (count == 0)
+ state <= `ST_RX;
+ else
+ count <= count - 1;
+
+ default: // Error
+ begin
+ state <= `ST_RX;
+ count <= 0;
+ end
+ endcase
+
+ assign atr_tx_o = (state == `ST_TX) | (state == `ST_RX_DELAY);
+
+endmodule // atr_delay
+
diff --git a/fpga/usrp1/sdr_lib/bidir_reg.v b/fpga/usrp1/sdr_lib/bidir_reg.v
new file mode 100644
index 000000000..b12441252
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/bidir_reg.v
@@ -0,0 +1,29 @@
+// Bidirectional registers
+
+module bidir_reg
+ ( inout wire [15:0] tristate,
+ input wire [15:0] oe,
+ input wire [15:0] reg_val );
+
+ // This would be much cleaner if all the tools
+ // supported "for generate"........
+
+ assign tristate[0] = oe[0] ? reg_val[0] : 1'bz;
+ assign tristate[1] = oe[1] ? reg_val[1] : 1'bz;
+ assign tristate[2] = oe[2] ? reg_val[2] : 1'bz;
+ assign tristate[3] = oe[3] ? reg_val[3] : 1'bz;
+ assign tristate[4] = oe[4] ? reg_val[4] : 1'bz;
+ assign tristate[5] = oe[5] ? reg_val[5] : 1'bz;
+ assign tristate[6] = oe[6] ? reg_val[6] : 1'bz;
+ assign tristate[7] = oe[7] ? reg_val[7] : 1'bz;
+ assign tristate[8] = oe[8] ? reg_val[8] : 1'bz;
+ assign tristate[9] = oe[9] ? reg_val[9] : 1'bz;
+ assign tristate[10] = oe[10] ? reg_val[10] : 1'bz;
+ assign tristate[11] = oe[11] ? reg_val[11] : 1'bz;
+ assign tristate[12] = oe[12] ? reg_val[12] : 1'bz;
+ assign tristate[13] = oe[13] ? reg_val[13] : 1'bz;
+ assign tristate[14] = oe[14] ? reg_val[14] : 1'bz;
+ assign tristate[15] = oe[15] ? reg_val[15] : 1'bz;
+
+endmodule // bidir_reg
+
diff --git a/fpga/usrp1/sdr_lib/cic_dec_shifter.v b/fpga/usrp1/sdr_lib/cic_dec_shifter.v
new file mode 100644
index 000000000..a213303c8
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/cic_dec_shifter.v
@@ -0,0 +1,100 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+// NOTE This only works for N=4, max decim rate of 128
+// NOTE signal "rate" is ONE LESS THAN the actual rate
+
+module cic_dec_shifter(rate,signal_in,signal_out);
+ parameter bw = 16;
+ parameter maxbitgain = 28;
+
+ input [7:0] rate;
+ input wire [bw+maxbitgain-1:0] signal_in;
+ output reg [bw-1:0] signal_out;
+
+ function [4:0] bitgain;
+ input [7:0] rate;
+ case(rate)
+ // Exact Cases -- N*log2(rate)
+ 8'd4 : bitgain = 8;
+ 8'd8 : bitgain = 12;
+ 8'd16 : bitgain = 16;
+ 8'd32 : bitgain = 20;
+ 8'd64 : bitgain = 24;
+ 8'd128 : bitgain = 28;
+
+ // Nearest without overflow -- ceil(N*log2(rate))
+ 8'd5 : bitgain = 10;
+ 8'd6 : bitgain = 11;
+ 8'd7 : bitgain = 12;
+ 8'd9 : bitgain = 13;
+ 8'd10,8'd11 : bitgain = 14;
+ 8'd12,8'd13 : bitgain = 15;
+ 8'd14,8'd15 : bitgain = 16;
+ 8'd17,8'd18,8'd19 : bitgain = 17;
+ 8'd20,8'd21,8'd22 : bitgain = 18;
+ 8'd23,8'd24,8'd25,8'd26 : bitgain = 19;
+ 8'd27,8'd28,8'd29,8'd30,8'd31 : bitgain = 20;
+ 8'd33,8'd34,8'd35,8'd36,8'd37,8'd38 : bitgain = 21;
+ 8'd39,8'd40,8'd41,8'd42,8'd43,8'd44,8'd45 : bitgain = 22;
+ 8'd46,8'd47,8'd48,8'd49,8'd50,8'd51,8'd52,8'd53 : bitgain = 23;
+ 8'd54,8'd55,8'd56,8'd57,8'd58,8'd59,8'd60,8'd61,8'd62,8'd63 : bitgain = 24;
+ 8'd65,8'd66,8'd67,8'd68,8'd69,8'd70,8'd71,8'd72,8'd73,8'd74,8'd75,8'd76 : bitgain = 25;
+ 8'd77,8'd78,8'd79,8'd80,8'd81,8'd82,8'd83,8'd84,8'd85,8'd86,8'd87,8'd88,8'd89,8'd90 : bitgain = 26;
+ 8'd91,8'd92,8'd93,8'd94,8'd95,8'd96,8'd97,8'd98,8'd99,8'd100,8'd101,8'd102,8'd103,8'd104,8'd105,8'd106,8'd107 : bitgain = 27;
+ default : bitgain = 28;
+ endcase // case(rate)
+ endfunction // bitgain
+
+ wire [4:0] shift = bitgain(rate+1);
+
+ // We should be able to do this, but can't ....
+ // assign signal_out = signal_in[shift+bw-1:shift];
+
+ always @*
+ case(shift)
+ 5'd8 : signal_out = signal_in[8+bw-1:8];
+ 5'd10 : signal_out = signal_in[10+bw-1:10];
+ 5'd11 : signal_out = signal_in[11+bw-1:11];
+ 5'd12 : signal_out = signal_in[12+bw-1:12];
+ 5'd13 : signal_out = signal_in[13+bw-1:13];
+ 5'd14 : signal_out = signal_in[14+bw-1:14];
+ 5'd15 : signal_out = signal_in[15+bw-1:15];
+ 5'd16 : signal_out = signal_in[16+bw-1:16];
+ 5'd17 : signal_out = signal_in[17+bw-1:17];
+ 5'd18 : signal_out = signal_in[18+bw-1:18];
+ 5'd19 : signal_out = signal_in[19+bw-1:19];
+ 5'd20 : signal_out = signal_in[20+bw-1:20];
+ 5'd21 : signal_out = signal_in[21+bw-1:21];
+ 5'd22 : signal_out = signal_in[22+bw-1:22];
+ 5'd23 : signal_out = signal_in[23+bw-1:23];
+ 5'd24 : signal_out = signal_in[24+bw-1:24];
+ 5'd25 : signal_out = signal_in[25+bw-1:25];
+ 5'd26 : signal_out = signal_in[26+bw-1:26];
+ 5'd27 : signal_out = signal_in[27+bw-1:27];
+ 5'd28 : signal_out = signal_in[28+bw-1:28];
+
+ default : signal_out = signal_in[28+bw-1:28];
+ endcase // case(shift)
+
+endmodule // cic_dec_shifter
+
diff --git a/fpga/usrp1/sdr_lib/cic_decim.v b/fpga/usrp1/sdr_lib/cic_decim.v
new file mode 100755
index 000000000..8c44f006d
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/cic_decim.v
@@ -0,0 +1,93 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+module cic_decim
+ ( clock,reset,enable,rate,strobe_in,strobe_out,signal_in,signal_out);
+ parameter bw = 16;
+ parameter N = 4;
+ parameter log2_of_max_rate = 7;
+ parameter maxbitgain = N * log2_of_max_rate;
+
+ input clock;
+ input reset;
+ input enable;
+ input [7:0] rate;
+ input strobe_in,strobe_out;
+ input [bw-1:0] signal_in;
+ output [bw-1:0] signal_out;
+ reg [bw-1:0] signal_out;
+ wire [bw-1:0] signal_out_unreg;
+
+ wire [bw+maxbitgain-1:0] signal_in_ext;
+ reg [bw+maxbitgain-1:0] integrator [0:N-1];
+ reg [bw+maxbitgain-1:0] differentiator [0:N-1];
+ reg [bw+maxbitgain-1:0] pipeline [0:N-1];
+ reg [bw+maxbitgain-1:0] sampler;
+
+ integer i;
+
+ sign_extend #(bw,bw+maxbitgain)
+ ext_input (.in(signal_in),.out(signal_in_ext));
+
+ always @(posedge clock)
+ if(reset)
+ for(i=0;i<N;i=i+1)
+ integrator[i] <= #1 0;
+ else if (enable && strobe_in)
+ begin
+ integrator[0] <= #1 integrator[0] + signal_in_ext;
+ for(i=1;i<N;i=i+1)
+ integrator[i] <= #1 integrator[i] + integrator[i-1];
+ end
+
+ always @(posedge clock)
+ if(reset)
+ begin
+ sampler <= #1 0;
+ for(i=0;i<N;i=i+1)
+ begin
+ pipeline[i] <= #1 0;
+ differentiator[i] <= #1 0;
+ end
+ end
+ else if (enable && strobe_out)
+ begin
+ sampler <= #1 integrator[N-1];
+ differentiator[0] <= #1 sampler;
+ pipeline[0] <= #1 sampler - differentiator[0];
+ for(i=1;i<N;i=i+1)
+ begin
+ differentiator[i] <= #1 pipeline[i-1];
+ pipeline[i] <= #1 pipeline[i-1] - differentiator[i];
+ end
+ end // if (enable && strobe_out)
+
+ wire [bw+maxbitgain-1:0] signal_out_unnorm = pipeline[N-1];
+
+ cic_dec_shifter #(bw)
+ cic_dec_shifter(rate,signal_out_unnorm,signal_out_unreg);
+
+ always @(posedge clock)
+ signal_out <= #1 signal_out_unreg;
+
+endmodule // cic_decim
+
diff --git a/fpga/usrp1/sdr_lib/cic_int_shifter.v b/fpga/usrp1/sdr_lib/cic_int_shifter.v
new file mode 100644
index 000000000..a8a3276f1
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/cic_int_shifter.v
@@ -0,0 +1,94 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+// NOTE This only works for N=4, max interp rate of 128
+// NOTE signal "rate" is ONE LESS THAN the actual rate
+
+module cic_int_shifter(rate,signal_in,signal_out);
+ parameter bw = 16;
+ parameter maxbitgain = 21;
+
+ input [7:0] rate;
+ input wire [bw+maxbitgain-1:0] signal_in;
+ output reg [bw-1:0] signal_out;
+
+ function [4:0] bitgain;
+ input [7:0] rate;
+ case(rate)
+ // Exact Cases
+ 8'd4 : bitgain = 6;
+ 8'd8 : bitgain = 9;
+ 8'd16 : bitgain = 12;
+ 8'd32 : bitgain = 15;
+ 8'd64 : bitgain = 18;
+ 8'd128 : bitgain = 21;
+
+ // Nearest without overflow
+ 8'd5 : bitgain = 7;
+ 8'd6 : bitgain = 8;
+ 8'd7 : bitgain = 9;
+ 8'd9,8'd10 : bitgain = 10;
+ 8'd11,8'd12 : bitgain = 11;
+ 8'd13,8'd14,8'd15 : bitgain = 12;
+ 8'd17,8'd18,8'd19,8'd20 : bitgain = 13;
+ 8'd21,8'd22,8'd23,8'd24,8'd25 : bitgain = 14;
+ 8'd26,8'd27,8'd28,8'd29,8'd30,8'd31 : bitgain = 15;
+ 8'd33,8'd34,8'd35,8'd36,8'd37,8'd38,8'd39,8'd40 : bitgain = 16;
+ 8'd41,8'd42,8'd43,8'd44,8'd45,8'd46,8'd47,8'd48,8'd49,8'd50 : bitgain = 17;
+ 8'd51,8'd52,8'd53,8'd54,8'd55,8'd56,8'd57,8'd58,8'd59,8'd60,8'd61,8'd62,8'd63 : bitgain = 18;
+ 8'd65,8'd66,8'd67,8'd68,8'd69,8'd70,8'd71,8'd72,8'd73,8'd74,8'd75,8'd76,8'd77,8'd78,8'd79,8'd80 : bitgain = 19;
+ 8'd81,8'd82,8'd83,8'd84,8'd85,8'd86,8'd87,8'd88,8'd89,8'd90,8'd91,8'd92,8'd93,8'd94,8'd95,8'd96,8'd97,8'd98,8'd99,8'd100,8'd101 : bitgain = 20;
+
+ default : bitgain = 21;
+ endcase // case(rate)
+ endfunction // bitgain
+
+ wire [4:0] shift = bitgain(rate+1);
+
+ // We should be able to do this, but can't ....
+ // assign signal_out = signal_in[shift+bw-1:shift];
+
+ always @*
+ case(shift)
+ 5'd6 : signal_out = signal_in[6+bw-1:6];
+ 5'd9 : signal_out = signal_in[9+bw-1:9];
+ 5'd12 : signal_out = signal_in[12+bw-1:12];
+ 5'd15 : signal_out = signal_in[15+bw-1:15];
+ 5'd18 : signal_out = signal_in[18+bw-1:18];
+ 5'd21 : signal_out = signal_in[21+bw-1:21];
+
+ 5'd7 : signal_out = signal_in[7+bw-1:7];
+ 5'd8 : signal_out = signal_in[8+bw-1:8];
+ 5'd10 : signal_out = signal_in[10+bw-1:10];
+ 5'd11 : signal_out = signal_in[11+bw-1:11];
+ 5'd13 : signal_out = signal_in[13+bw-1:13];
+ 5'd14 : signal_out = signal_in[14+bw-1:14];
+ 5'd16 : signal_out = signal_in[16+bw-1:16];
+ 5'd17 : signal_out = signal_in[17+bw-1:17];
+ 5'd19 : signal_out = signal_in[19+bw-1:19];
+ 5'd20 : signal_out = signal_in[20+bw-1:20];
+
+ default : signal_out = signal_in[21+bw-1:21];
+ endcase // case(shift)
+
+endmodule // cic_int_shifter
+
diff --git a/fpga/usrp1/sdr_lib/cic_interp.v b/fpga/usrp1/sdr_lib/cic_interp.v
new file mode 100755
index 000000000..32d106861
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/cic_interp.v
@@ -0,0 +1,90 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+module cic_interp(clock,reset,enable,rate,strobe_in,strobe_out,signal_in,signal_out);
+ parameter bw = 16;
+ parameter N = 4;
+ parameter log2_of_max_rate = 7;
+ parameter maxbitgain = (N-1)*log2_of_max_rate;
+
+ input clock;
+ input reset;
+ input enable;
+ input [7:0] rate;
+ input strobe_in,strobe_out;
+ input [bw-1:0] signal_in;
+ wire [bw-1:0] signal_in;
+ output [bw-1:0] signal_out;
+ wire [bw-1:0] signal_out;
+
+ wire [bw+maxbitgain-1:0] signal_in_ext;
+ reg [bw+maxbitgain-1:0] integrator [0:N-1];
+ reg [bw+maxbitgain-1:0] differentiator [0:N-1];
+ reg [bw+maxbitgain-1:0] pipeline [0:N-1];
+
+ integer i;
+
+ sign_extend #(bw,bw+maxbitgain)
+ ext_input (.in(signal_in),.out(signal_in_ext));
+
+ wire clear_me = reset | ~enable;
+ //FIXME Note that this section has pipe and diff reversed
+ // It still works, but is confusing
+ always @(posedge clock)
+ if(clear_me)
+ for(i=0;i<N;i=i+1)
+ integrator[i] <= #1 0;
+ else if (enable & strobe_out)
+ begin
+ if(strobe_in)
+ integrator[0] <= #1 integrator[0] + pipeline[N-1];
+ for(i=1;i<N;i=i+1)
+ integrator[i] <= #1 integrator[i] + integrator[i-1];
+ end
+
+ always @(posedge clock)
+ if(clear_me)
+ begin
+ for(i=0;i<N;i=i+1)
+ begin
+ differentiator[i] <= #1 0;
+ pipeline[i] <= #1 0;
+ end
+ end
+ else if (enable && strobe_in)
+ begin
+ differentiator[0] <= #1 signal_in_ext;
+ pipeline[0] <= #1 signal_in_ext - differentiator[0];
+ for(i=1;i<N;i=i+1)
+ begin
+ differentiator[i] <= #1 pipeline[i-1];
+ pipeline[i] <= #1 pipeline[i-1] - differentiator[i];
+ end
+ end
+
+ wire [bw+maxbitgain-1:0] signal_out_unnorm = integrator[N-1];
+
+ cic_int_shifter #(bw)
+ cic_int_shifter(rate,signal_out_unnorm,signal_out);
+
+endmodule // cic_interp
+
diff --git a/fpga/usrp1/sdr_lib/clk_divider.v b/fpga/usrp1/sdr_lib/clk_divider.v
new file mode 100755
index 000000000..fdef234d2
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/clk_divider.v
@@ -0,0 +1,43 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+module clk_divider(input reset, input wire in_clk,output reg out_clk, input [7:0] ratio);
+ reg [7:0] counter;
+
+ // FIXME maybe should use PLL or switch to double edge version
+
+ always @(posedge in_clk or posedge reset)
+ if(reset)
+ counter <= #1 8'd0;
+ else if(counter == 0)
+ counter <= #1 ratio[7:1] + (ratio[0] & out_clk) - 8'b1;
+ else
+ counter <= #1 counter-8'd1;
+
+ always @(posedge in_clk or posedge reset)
+ if(reset)
+ out_clk <= #1 1'b0;
+ else if(counter == 0)
+ out_clk <= #1 ~out_clk;
+
+endmodule // clk_divider
+
diff --git a/fpga/usrp1/sdr_lib/cordic.v b/fpga/usrp1/sdr_lib/cordic.v
new file mode 100755
index 000000000..ea4119426
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/cordic.v
@@ -0,0 +1,109 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module cordic(clock, reset, enable, xi, yi, zi, xo, yo, zo );
+ parameter bitwidth = 16;
+ parameter zwidth = 16;
+
+ input clock;
+ input reset;
+ input enable;
+ input [bitwidth-1:0] xi, yi;
+ output [bitwidth-1:0] xo, yo;
+ input [zwidth-1:0] zi;
+ output [zwidth-1:0] zo;
+
+ reg [bitwidth+1:0] x0,y0;
+ reg [zwidth-2:0] z0;
+ wire [bitwidth+1:0] x1,x2,x3,x4,x5,x6,x7,x8,x9,x10,x11,x12;
+ wire [bitwidth+1:0] y1,y2,y3,y4,y5,y6,y7,y8,y9,y10,y11,y12;
+ wire [zwidth-2:0] z1,z2,z3,z4,z5,z6,z7,z8,z9,z10,z11,z12;
+
+ wire [bitwidth+1:0] xi_ext = {{2{xi[bitwidth-1]}},xi};
+ wire [bitwidth+1:0] yi_ext = {{2{yi[bitwidth-1]}},yi};
+
+ // Compute consts. Would be easier if vlog had atan...
+ // see gen_cordic_consts.py
+
+`define c00 16'd8192
+`define c01 16'd4836
+`define c02 16'd2555
+`define c03 16'd1297
+`define c04 16'd651
+`define c05 16'd326
+`define c06 16'd163
+`define c07 16'd81
+`define c08 16'd41
+`define c09 16'd20
+`define c10 16'd10
+`define c11 16'd5
+`define c12 16'd3
+`define c13 16'd1
+`define c14 16'd1
+`define c15 16'd0
+`define c16 16'd0
+
+ always @(posedge clock)
+ if(reset)
+ begin
+ x0 <= #1 0; y0 <= #1 0; z0 <= #1 0;
+ end
+ else if(enable)
+ begin
+ z0 <= #1 zi[zwidth-2:0];
+ case (zi[zwidth-1:zwidth-2])
+ 2'b00, 2'b11 :
+ begin
+ x0 <= #1 xi_ext;
+ y0 <= #1 yi_ext;
+ end
+ 2'b01, 2'b10 :
+ begin
+ x0 <= #1 -xi_ext;
+ y0 <= #1 -yi_ext;
+ end
+ endcase // case(zi[zwidth-1:zwidth-2])
+ end // else: !if(reset)
+
+ // FIXME need to handle variable number of stages
+ // FIXME should be able to narrow zwidth but quartus makes it bigger...
+ // This would be easier if arrays worked better in vlog...
+ cordic_stage #(bitwidth+2,zwidth-1,0) cordic_stage0 (clock,reset,enable,x0,y0,z0,`c00,x1,y1,z1);
+ cordic_stage #(bitwidth+2,zwidth-1,1) cordic_stage1 (clock,reset,enable,x1,y1,z1,`c01,x2,y2,z2);
+ cordic_stage #(bitwidth+2,zwidth-1,2) cordic_stage2 (clock,reset,enable,x2,y2,z2,`c02,x3,y3,z3);
+ cordic_stage #(bitwidth+2,zwidth-1,3) cordic_stage3 (clock,reset,enable,x3,y3,z3,`c03,x4,y4,z4);
+ cordic_stage #(bitwidth+2,zwidth-1,4) cordic_stage4 (clock,reset,enable,x4,y4,z4,`c04,x5,y5,z5);
+ cordic_stage #(bitwidth+2,zwidth-1,5) cordic_stage5 (clock,reset,enable,x5,y5,z5,`c05,x6,y6,z6);
+ cordic_stage #(bitwidth+2,zwidth-1,6) cordic_stage6 (clock,reset,enable,x6,y6,z6,`c06,x7,y7,z7);
+ cordic_stage #(bitwidth+2,zwidth-1,7) cordic_stage7 (clock,reset,enable,x7,y7,z7,`c07,x8,y8,z8);
+ cordic_stage #(bitwidth+2,zwidth-1,8) cordic_stage8 (clock,reset,enable,x8,y8,z8,`c08,x9,y9,z9);
+ cordic_stage #(bitwidth+2,zwidth-1,9) cordic_stage9 (clock,reset,enable,x9,y9,z9,`c09,x10,y10,z10);
+ cordic_stage #(bitwidth+2,zwidth-1,10) cordic_stage10 (clock,reset,enable,x10,y10,z10,`c10,x11,y11,z11);
+ cordic_stage #(bitwidth+2,zwidth-1,11) cordic_stage11 (clock,reset,enable,x11,y11,z11,`c11,x12,y12,z12);
+
+ assign xo = x12[bitwidth:1];
+ assign yo = y12[bitwidth:1];
+ //assign xo = x12[bitwidth+1:2]; // CORDIC gain is ~1.6, plus gain from rotating vectors
+ //assign yo = y12[bitwidth+1:2];
+ assign zo = z12;
+
+endmodule // cordic
+
diff --git a/fpga/usrp1/sdr_lib/cordic_stage.v b/fpga/usrp1/sdr_lib/cordic_stage.v
new file mode 100755
index 000000000..d44998b0d
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/cordic_stage.v
@@ -0,0 +1,60 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module cordic_stage( clock, reset, enable, xi,yi,zi,constant,xo,yo,zo);
+ parameter bitwidth = 16;
+ parameter zwidth = 16;
+ parameter shift = 1;
+
+ input clock;
+ input reset;
+ input enable;
+ input [bitwidth-1:0] xi,yi;
+ input [zwidth-1:0] zi;
+ input [zwidth-1:0] constant;
+ output [bitwidth-1:0] xo,yo;
+ output [zwidth-1:0] zo;
+
+ wire z_is_pos = ~zi[zwidth-1];
+
+ reg [bitwidth-1:0] xo,yo;
+ reg [zwidth-1:0] zo;
+
+ always @(posedge clock)
+ if(reset)
+ begin
+ xo <= #1 0;
+ yo <= #1 0;
+ zo <= #1 0;
+ end
+ else if(enable)
+ begin
+ xo <= #1 z_is_pos ?
+ xi - {{shift+1{yi[bitwidth-1]}},yi[bitwidth-2:shift]} :
+ xi + {{shift+1{yi[bitwidth-1]}},yi[bitwidth-2:shift]};
+ yo <= #1 z_is_pos ?
+ yi + {{shift+1{xi[bitwidth-1]}},xi[bitwidth-2:shift]} :
+ yi - {{shift+1{xi[bitwidth-1]}},xi[bitwidth-2:shift]};
+ zo <= #1 z_is_pos ?
+ zi - constant :
+ zi + constant;
+ end
+endmodule
diff --git a/fpga/usrp1/sdr_lib/ddc.v b/fpga/usrp1/sdr_lib/ddc.v
new file mode 100755
index 000000000..0d4da9bbc
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/ddc.v
@@ -0,0 +1,97 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+
+// DDC block
+
+module ddc(input clock,
+ input reset,
+ input enable,
+ input [3:0] rate1,
+ input [3:0] rate2,
+ output strobe,
+ input [31:0] freq,
+ input [15:0] i_in,
+ input [15:0] q_in,
+ output [15:0] i_out,
+ output [15:0] q_out
+ );
+ parameter bw = 16;
+ parameter zw = 16;
+
+ wire [15:0] i_cordic_out, q_cordic_out;
+ wire [31:0] phase;
+
+ wire strobe1, strobe2;
+ reg [3:0] strobe_ctr1,strobe_ctr2;
+
+ always @(posedge clock)
+ if(reset | ~enable)
+ strobe_ctr2 <= #1 4'd0;
+ else if(strobe2)
+ strobe_ctr2 <= #1 4'd0;
+ else
+ strobe_ctr2 <= #1 strobe_ctr2 + 4'd1;
+
+ always @(posedge clock)
+ if(reset | ~enable)
+ strobe_ctr1 <= #1 4'd0;
+ else if(strobe1)
+ strobe_ctr1 <= #1 4'd0;
+ else if(strobe2)
+ strobe_ctr1 <= #1 strobe_ctr1 + 4'd1;
+
+
+ assign strobe2 = enable & ( strobe_ctr2 == rate2 );
+ assign strobe1 = strobe2 & ( strobe_ctr1 == rate1 );
+
+ assign strobe = strobe1;
+
+ function [2:0] log_ceil;
+ input [3:0] val;
+
+ log_ceil = val[3] ? 3'd4 : val[2] ? 3'd3 : val[1] ? 3'd2 : 3'd1;
+ endfunction
+
+ wire [2:0] shift1 = log_ceil(rate1);
+ wire [2:0] shift2 = log_ceil(rate2);
+
+ cordic #(.bitwidth(bw),.zwidth(zw),.stages(16))
+ cordic(.clock(clock), .reset(reset), .enable(enable),
+ .xi(i_in), .yi(q_in), .zi(phase[31:32-zw]),
+ .xo(i_cordic_out), .yo(q_cordic_out), .zo() );
+
+ cic_decim_2stage #(.bw(bw),.N(4))
+ decim_i(.clock(clock),.reset(reset),.enable(enable),
+ .strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
+ .signal_in(i_cordic_out),.signal_out(i_out));
+
+ cic_decim_2stage #(.bw(bw),.N(4))
+ decim_q(.clock(clock),.reset(reset),.enable(enable),
+ .strobe1(1'b1),.strobe2(strobe2),.strobe3(strobe1),.shift1(shift2),.shift2(shift1),
+ .signal_in(q_cordic_out),.signal_out(q_out));
+
+ phase_acc #(.resolution(32))
+ nco (.clk(clock),.reset(reset),.enable(enable),
+ .freq(freq),.phase(phase));
+
+endmodule
diff --git a/fpga/usrp1/sdr_lib/dpram.v b/fpga/usrp1/sdr_lib/dpram.v
new file mode 100644
index 000000000..28af90163
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/dpram.v
@@ -0,0 +1,47 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+
+module dpram(wclk,wdata,waddr,wen,rclk,rdata,raddr);
+ parameter depth = 4;
+ parameter width = 16;
+ parameter size = 16;
+
+ input wclk;
+ input [width-1:0] wdata;
+ input [depth-1:0] waddr;
+ input wen;
+
+ input rclk;
+ output reg [width-1:0] rdata;
+ input [depth-1:0] raddr;
+
+ reg [width-1:0] ram [0:size-1];
+
+ always @(posedge wclk)
+ if(wen)
+ ram[waddr] <= #1 wdata;
+
+ always @(posedge rclk)
+ rdata <= #1 ram[raddr];
+
+endmodule // dpram
diff --git a/fpga/usrp1/sdr_lib/duc.v b/fpga/usrp1/sdr_lib/duc.v
new file mode 100755
index 000000000..6dac95b49
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/duc.v
@@ -0,0 +1,95 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// DUC block
+
+module duc(input clock,
+ input reset,
+ input enable,
+ input [3:0] rate1,
+ input [3:0] rate2,
+ output strobe,
+ input [31:0] freq,
+ input [15:0] i_in,
+ input [15:0] q_in,
+ output [15:0] i_out,
+ output [15:0] q_out
+ );
+ parameter bw = 16;
+ parameter zw = 16;
+
+ wire [15:0] i_interp_out, q_interp_out;
+ wire [31:0] phase;
+
+ wire strobe1, strobe2;
+ reg [3:0] strobe_ctr1,strobe_ctr2;
+
+ always @(posedge clock)
+ if(reset | ~enable)
+ strobe_ctr2 <= #1 4'd0;
+ else if(strobe2)
+ strobe_ctr2 <= #1 4'd0;
+ else
+ strobe_ctr2 <= #1 strobe_ctr2 + 4'd1;
+
+ always @(posedge clock)
+ if(reset | ~enable)
+ strobe_ctr1 <= #1 4'd0;
+ else if(strobe1)
+ strobe_ctr1 <= #1 4'd0;
+ else if(strobe2)
+ strobe_ctr1 <= #1 strobe_ctr1 + 4'd1;
+
+
+ assign strobe2 = enable & ( strobe_ctr2 == rate2 );
+ assign strobe1 = strobe2 & ( strobe_ctr1 == rate1 );
+
+ assign strobe = strobe1;
+
+ function [2:0] log_ceil;
+ input [3:0] val;
+
+ log_ceil = val[3] ? 3'd4 : val[2] ? 3'd3 : val[1] ? 3'd2 : 3'd1;
+ endfunction
+
+ wire [2:0] shift1 = log_ceil(rate1);
+ wire [2:0] shift2 = log_ceil(rate2);
+
+ cordic #(.bitwidth(bw),.zwidth(zw),.stages(16))
+ cordic(.clock(clock), .reset(reset), .enable(enable),
+ .xi(i_interp_out), .yi(q_interp_out), .zi(phase[31:32-zw]),
+ .xo(i_out), .yo(q_out), .zo() );
+
+ cic_interp_2stage #(.bw(bw),.N(4))
+ interp_i(.clock(clock),.reset(reset),.enable(enable),
+ .strobe1(strobe1),.strobe2(strobe2),.strobe3(1'b1),.shift1(shift1),.shift2(shift2),
+ .signal_in(i_in),.signal_out(i_interp_out));
+
+ cic_interp_2stage #(.bw(bw),.N(4))
+ interp_q(.clock(clock),.reset(reset),.enable(enable),
+ .strobe1(strobe1),.strobe2(strobe2),.strobe3(1'b1),.shift1(shift1),.shift2(shift2),
+ .signal_in(q_in),.signal_out(q_interp_out));
+
+ phase_acc #(.resolution(32))
+ nco (.clk(clock),.reset(reset),.enable(enable),
+ .freq(freq),.phase(phase));
+
+endmodule
diff --git a/fpga/usrp1/sdr_lib/ext_fifo.v b/fpga/usrp1/sdr_lib/ext_fifo.v
new file mode 100644
index 000000000..41e30de71
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/ext_fifo.v
@@ -0,0 +1,126 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+// Vendor Independent FIFO module
+// Width and Depth should be parameterizable
+// Asynchronous clocks for each side
+// Read side is read-acknowledge, not read-request
+// FIFO does not enforce "don't write when full, don't read when empty"
+// That is up to the connecting modules
+// The FIFO only holds 2^N-1 entries, not 2^N
+
+module fifo (reset,data,write,wrclk,wr_used,q,read_ack,rdclk,rd_used);
+ parameter width=32;
+ parameter depth=10;
+
+ input reset; // Asynchronous
+ input [width-1:0] data;
+ input write;
+ input wrclk;
+ output [depth-1:0] wr_used;
+ output [width-1:0] q;
+ input read_ack;
+ input rdclk;
+ output [depth-1:0] rd_used;
+
+ reg [depth-1:0] read_addr, write_addr,
+ read_addr_gray, read_addr_gray_sync,
+ write_addr_gray, write_addr_gray_sync;
+
+ // Pseudo-dual-port RAM
+ dpram #(.depth(10),.width(width),.size(1024))
+ fifo_ram (.wclk(wrclk),.wdata(data),.waddr(write_addr),.wen(write),
+ .rclk(rdclk), .rdata(q),.raddr(read_addr) );
+
+ wire [depth-1:0] wag,rag;
+
+ // Keep track of own side's pointer
+ always @(posedge wrclk or posedge reset)
+ if(reset) write_addr <= #1 0;
+ else if(write) write_addr <= #1 write_addr + 1;
+
+ always @(posedge rdclk or posedge reset)
+ if(reset) read_addr <= #1 0;
+ else if(read_ack) read_addr <= #1 read_addr + 1;
+
+ // Convert own side pointer to gray
+ bin2gray #(depth) write_b2g (write_addr,wag);
+ bin2gray #(depth) read_b2g (read_addr,rag);
+
+ // Latch it
+ always @(posedge wrclk or posedge reset)
+ if(reset) write_addr_gray <= #1 0;
+ else write_addr_gray <= #1 wag;
+
+ always @(posedge rdclk or posedge reset)
+ if(reset) read_addr_gray <= #1 0;
+ else read_addr_gray <= #1 rag;
+
+ // Send it to other side and latch
+ always @(posedge wrclk or posedge reset)
+ if(reset) read_addr_gray_sync <= #1 0;
+ else read_addr_gray_sync <= #1 read_addr_gray;
+
+ always @(posedge rdclk or posedge reset)
+ if(reset) write_addr_gray_sync <= #1 0;
+ else write_addr_gray_sync <= #1 write_addr_gray;
+
+ wire [depth-1:0] write_addr_sync, read_addr_sync;
+
+ // Convert back to binary
+ gray2bin #(depth) write_g2b (write_addr_gray_sync, write_addr_sync);
+ gray2bin #(depth) read_g2b (read_addr_gray_sync, read_addr_sync);
+
+ assign rd_used = write_addr_sync - read_addr;
+ assign wr_used = write_addr - read_addr_sync;
+
+endmodule // fifo
+
+module bin2gray(bin_val,gray_val);
+ parameter width = 8;
+ input [width-1:0] bin_val;
+ output reg [width-1:0] gray_val;
+
+ integer i;
+
+ always @*
+ begin
+ gray_val[width-1] = bin_val[width-1];
+ for(i=0;i<width-1;i=i+1)
+ gray_val[i] = bin_val[i] ^ bin_val[i+1];
+ end
+endmodule // bin2gray
+
+module gray2bin(gray_val,bin_val);
+ parameter width = 8;
+ input [width-1:0] gray_val;
+ output reg [width-1:0] bin_val;
+
+ integer i;
+
+ always @*
+ begin
+ bin_val[width-1] = gray_val[width-1];
+ for(i=width-2;i>=0;i=i-1)
+ bin_val[i] = bin_val[i+1] ^ gray_val[i];
+ end
+endmodule // gray2bin
diff --git a/fpga/usrp1/sdr_lib/gen_cordic_consts.py b/fpga/usrp1/sdr_lib/gen_cordic_consts.py
new file mode 100755
index 000000000..ab66cfe01
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/gen_cordic_consts.py
@@ -0,0 +1,10 @@
+#!/usr/bin/env python
+
+import math
+
+zwidth = 16
+
+for i in range(17):
+ c = math.atan (1.0/(2**i)) / (2 * math.pi) * (1 << zwidth)
+ print "`define c%02d %d'd%d" % (i, zwidth, round (c))
+
diff --git a/fpga/usrp1/sdr_lib/gen_sync.v b/fpga/usrp1/sdr_lib/gen_sync.v
new file mode 100644
index 000000000..d6efdba98
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/gen_sync.v
@@ -0,0 +1,43 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module gen_sync
+ ( input clock,
+ input reset,
+ input enable,
+ input [7:0] rate,
+ output wire sync );
+
+// parameter width = 8;
+
+ reg [7:0] counter;
+ assign sync = |(((rate+1)>>1)& counter);
+
+ always @(posedge clock)
+ if(reset || ~enable)
+ counter <= #1 0;
+ else if(counter == rate)
+ counter <= #1 0;
+ else
+ counter <= #1 counter + 8'd1;
+
+endmodule // gen_sync
+
diff --git a/fpga/usrp1/sdr_lib/hb/acc.v b/fpga/usrp1/sdr_lib/hb/acc.v
new file mode 100644
index 000000000..195d5ea94
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/acc.v
@@ -0,0 +1,22 @@
+
+
+module acc (input clock, input reset, input clear, input enable_in, output reg enable_out,
+ input signed [30:0] addend, output reg signed [33:0] sum );
+
+ always @(posedge clock)
+ if(reset)
+ sum <= #1 34'd0;
+ //else if(clear & enable_in)
+ // sum <= #1 addend;
+ //else if(clear)
+ // sum <= #1 34'd0;
+ else if(clear)
+ sum <= #1 addend;
+ else if(enable_in)
+ sum <= #1 sum + addend;
+
+ always @(posedge clock)
+ enable_out <= #1 enable_in;
+
+endmodule // acc
+
diff --git a/fpga/usrp1/sdr_lib/hb/coeff_rom.v b/fpga/usrp1/sdr_lib/hb/coeff_rom.v
new file mode 100644
index 000000000..7f8886b4e
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/coeff_rom.v
@@ -0,0 +1,19 @@
+
+
+module coeff_rom (input clock, input [2:0] addr, output reg [15:0] data);
+
+ always @(posedge clock)
+ case (addr)
+ 3'd0 : data <= #1 -16'd49;
+ 3'd1 : data <= #1 16'd165;
+ 3'd2 : data <= #1 -16'd412;
+ 3'd3 : data <= #1 16'd873;
+ 3'd4 : data <= #1 -16'd1681;
+ 3'd5 : data <= #1 16'd3135;
+ 3'd6 : data <= #1 -16'd6282;
+ 3'd7 : data <= #1 16'd20628;
+ endcase // case(addr)
+
+endmodule // coeff_rom
+
+
diff --git a/fpga/usrp1/sdr_lib/hb/halfband_decim.v b/fpga/usrp1/sdr_lib/hb/halfband_decim.v
new file mode 100644
index 000000000..dff4d902c
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/halfband_decim.v
@@ -0,0 +1,163 @@
+/* -*- verilog -*-
+ *
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2005 Matt Ettus
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * This implements a 31-tap halfband filter that decimates by two.
+ * The coefficients are symmetric, and with the exception of the middle tap,
+ * every other coefficient is zero. The middle section of taps looks like this:
+ *
+ * ..., -1468, 0, 2950, 0, -6158, 0, 20585, 32768, 20585, 0, -6158, 0, 2950, 0, -1468, ...
+ * |
+ * middle tap -------+
+ *
+ * See coeff_rom.v for the full set. The taps are scaled relative to 32768,
+ * thus the middle tap equals 1.0. Not counting the middle tap, there are 8
+ * non-zero taps on each side, and they are symmetric. A naive implementation
+ * requires a mulitply for each non-zero tap. Because of symmetry, we can
+ * replace 2 multiplies with 1 add and 1 multiply. Thus, to compute each output
+ * sample, we need to perform 8 multiplications. Since the middle tap is 1.0,
+ * we just add the corresponding delay line value.
+ *
+ * About timing: We implement this with a single multiplier, so it takes
+ * 8 cycles to compute a single output. However, since we're decimating by two
+ * we can accept a new input value every 4 cycles. strobe_in is asserted when
+ * there's a new input sample available. Depending on the overall decimation
+ * rate, strobe_in may be asserted less frequently than once every 4 clocks.
+ * On the output side, we assert strobe_out when output contains a new sample.
+ *
+ * Implementation: Every time strobe_in is asserted we store the new data into
+ * the delay line. We split the delay line into two components, one for the
+ * even samples, and one for the odd samples. ram16_odd is the delay line for
+ * the odd samples. This ram is written on each odd assertion of strobe_in, and
+ * is read on each clock when we're computing the dot product. ram16_even is
+ * similar, although because it holds the even samples we must be able to read
+ * two samples from different addresses at the same time, while writing the incoming
+ * even samples. Thus it's "triple-ported".
+ */
+
+module halfband_decim
+ (input clock, input reset, input enable, input strobe_in, output wire strobe_out,
+ input wire [15:0] data_in, output reg [15:0] data_out,output wire [15:0] debugctrl);
+
+ reg [3:0] rd_addr1;
+ reg [3:0] rd_addr2;
+ reg [3:0] phase;
+ reg [3:0] base_addr;
+
+ wire signed [15:0] mac_out,middle_data, sum, coeff;
+ wire signed [30:0] product;
+ wire signed [33:0] sum_even;
+ wire clear;
+ reg store_odd;
+
+ always @(posedge clock)
+ if(reset)
+ store_odd <= #1 1'b0;
+ else
+ if(strobe_in)
+ store_odd <= #1 ~store_odd;
+
+ wire start = strobe_in & store_odd;
+ always @(posedge clock)
+ if(reset)
+ base_addr <= #1 4'd0;
+ else if(start)
+ base_addr <= #1 base_addr + 4'd1;
+
+ always @(posedge clock)
+ if(reset)
+ phase <= #1 4'd8;
+ else if (start)
+ phase <= #1 4'd0;
+ else if(phase != 4'd8)
+ phase <= #1 phase + 4'd1;
+
+ reg start_d1,start_d2,start_d3,start_d4,start_d5,start_d6,start_d7,start_d8,start_d9,start_dA,start_dB,start_dC,start_dD;
+ always @(posedge clock)
+ begin
+ start_d1 <= #1 start;
+ start_d2 <= #1 start_d1;
+ start_d3 <= #1 start_d2;
+ start_d4 <= #1 start_d3;
+ start_d5 <= #1 start_d4;
+ start_d6 <= #1 start_d5;
+ start_d7 <= #1 start_d6;
+ start_d8 <= #1 start_d7;
+ start_d9 <= #1 start_d8;
+ start_dA <= #1 start_d9;
+ start_dB <= #1 start_dA;
+ start_dC <= #1 start_dB;
+ start_dD <= #1 start_dC;
+ end // always @ (posedge clock)
+
+ reg mult_en, mult_en_pre;
+ always @(posedge clock)
+ begin
+ mult_en_pre <= #1 phase!=8;
+ mult_en <= #1 mult_en_pre;
+ end
+
+ assign clear = start_d4; // was dC
+ wire latch_result = start_d4; // was dC
+ assign strobe_out = start_d5; // was dD
+ wire acc_en;
+
+ always @*
+ case(phase[2:0])
+ 3'd0 : begin rd_addr1 = base_addr + 4'd0; rd_addr2 = base_addr + 4'd15; end
+ 3'd1 : begin rd_addr1 = base_addr + 4'd1; rd_addr2 = base_addr + 4'd14; end
+ 3'd2 : begin rd_addr1 = base_addr + 4'd2; rd_addr2 = base_addr + 4'd13; end
+ 3'd3 : begin rd_addr1 = base_addr + 4'd3; rd_addr2 = base_addr + 4'd12; end
+ 3'd4 : begin rd_addr1 = base_addr + 4'd4; rd_addr2 = base_addr + 4'd11; end
+ 3'd5 : begin rd_addr1 = base_addr + 4'd5; rd_addr2 = base_addr + 4'd10; end
+ 3'd6 : begin rd_addr1 = base_addr + 4'd6; rd_addr2 = base_addr + 4'd9; end
+ 3'd7 : begin rd_addr1 = base_addr + 4'd7; rd_addr2 = base_addr + 4'd8; end
+ default: begin rd_addr1 = base_addr + 4'd0; rd_addr2 = base_addr + 4'd15; end
+ endcase // case(phase)
+
+ coeff_rom coeff_rom (.clock(clock),.addr(phase[2:0]-3'd1),.data(coeff));
+
+ ram16_2sum ram16_even (.clock(clock),.write(strobe_in & ~store_odd),
+ .wr_addr(base_addr),.wr_data(data_in),
+ .rd_addr1(rd_addr1),.rd_addr2(rd_addr2),
+ .sum(sum));
+
+ ram16 ram16_odd (.clock(clock),.write(strobe_in & store_odd), // Holds middle items
+ .wr_addr(base_addr),.wr_data(data_in),
+ //.rd_addr(base_addr+4'd7),.rd_data(middle_data));
+ .rd_addr(base_addr+4'd6),.rd_data(middle_data));
+
+ mult mult(.clock(clock),.x(coeff),.y(sum),.product(product),.enable_in(mult_en),.enable_out(acc_en));
+
+ acc acc(.clock(clock),.reset(reset),.enable_in(acc_en),.enable_out(),
+ .clear(clear),.addend(product),.sum(sum_even));
+
+ wire signed [33:0] dout = sum_even + {{4{middle_data[15]}},middle_data,14'b0}; // We already divided product by 2!!!!
+
+ always @(posedge clock)
+ if(reset)
+ data_out <= #1 16'd0;
+ else if(latch_result)
+ data_out <= #1 dout[30:15] + (dout[33]& |dout[14:0]);
+
+ assign debugctrl = { clock,reset,acc_en,mult_en,clear,latch_result,store_odd,strobe_in,strobe_out,phase};
+
+endmodule // halfband_decim
diff --git a/fpga/usrp1/sdr_lib/hb/halfband_interp.v b/fpga/usrp1/sdr_lib/hb/halfband_interp.v
new file mode 100644
index 000000000..cdb11c1f6
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/halfband_interp.v
@@ -0,0 +1,121 @@
+
+
+module halfband_interp
+ (input clock, input reset, input enable,
+ input strobe_in, input strobe_out,
+ input [15:0] signal_in_i, input [15:0] signal_in_q,
+ output reg [15:0] signal_out_i, output reg [15:0] signal_out_q,
+ output wire [12:0] debug);
+
+ wire [15:0] coeff_ram_out;
+ wire [15:0] data_ram_out_i;
+ wire [15:0] data_ram_out_q;
+
+ wire [3:0] data_rd_addr;
+ reg [3:0] data_wr_addr;
+ reg [2:0] coeff_rd_addr;
+
+ wire filt_done;
+
+ wire [15:0] mac_out_i;
+ wire [15:0] mac_out_q;
+ reg [15:0] delayed_middle_i, delayed_middle_q;
+ wire [7:0] shift = 8'd9;
+
+ reg stb_out_happened;
+
+ wire [15:0] data_ram_out_i_b;
+
+ always @(posedge clock)
+ if(strobe_in)
+ stb_out_happened <= #1 1'b0;
+ else if(strobe_out)
+ stb_out_happened <= #1 1'b1;
+
+assign debug = {filt_done,data_rd_addr,data_wr_addr,coeff_rd_addr};
+
+ wire [15:0] signal_out_i = stb_out_happened ? mac_out_i : delayed_middle_i;
+ wire [15:0] signal_out_q = stb_out_happened ? mac_out_q : delayed_middle_q;
+
+/* always @(posedge clock)
+ if(reset)
+ begin
+ signal_out_i <= #1 16'd0;
+ signal_out_q <= #1 16'd0;
+ end
+ else if(strobe_in)
+ begin
+ signal_out_i <= #1 delayed_middle_i; // Multiply by 1 for middle coeff
+ signal_out_q <= #1 delayed_middle_q;
+ end
+ //else if(filt_done&stb_out_happened)
+ else if(stb_out_happened)
+ begin
+ signal_out_i <= #1 mac_out_i;
+ signal_out_q <= #1 mac_out_q;
+ end
+*/
+
+ always @(posedge clock)
+ if(reset)
+ coeff_rd_addr <= #1 3'd0;
+ else if(coeff_rd_addr != 3'd0)
+ coeff_rd_addr <= #1 coeff_rd_addr + 3'd1;
+ else if(strobe_in)
+ coeff_rd_addr <= #1 3'd1;
+
+ reg filt_done_d1;
+ always@(posedge clock)
+ filt_done_d1 <= #1 filt_done;
+
+ always @(posedge clock)
+ if(reset)
+ data_wr_addr <= #1 4'd0;
+ //else if(strobe_in)
+ else if(filt_done & ~filt_done_d1)
+ data_wr_addr <= #1 data_wr_addr + 4'd1;
+
+ always @(posedge clock)
+ if(coeff_rd_addr == 3'd7)
+ begin
+ delayed_middle_i <= #1 data_ram_out_i_b;
+ // delayed_middle_q <= #1 data_ram_out_q_b;
+ end
+
+// always @(posedge clock)
+// if(reset)
+// data_rd_addr <= #1 4'd0;
+// else if(strobe_in)
+// data_rd_addr <= #1 data_wr_addr + 4'd1;
+// else if(!filt_done)
+// data_rd_addr <= #1 data_rd_addr + 4'd1;
+// else
+// data_rd_addr <= #1 data_wr_addr;
+
+ wire [3:0] data_rd_addr1 = data_wr_addr + {1'b0,coeff_rd_addr};
+ wire [3:0] data_rd_addr2 = data_wr_addr + 15 - {1'b0,coeff_rd_addr};
+// always @(posedge clock)
+// if(reset)
+// filt_done <= #1 1'b1;
+// else if(strobe_in)
+ // filt_done <= #1 1'b0;
+// else if(coeff_rd_addr == 4'd0)
+// filt_done <= #1 1'b1;
+
+ assign filt_done = (coeff_rd_addr == 3'd0);
+
+ coeff_ram coeff_ram ( .clock(clock),.rd_addr({1'b0,coeff_rd_addr}),.rd_data(coeff_ram_out) );
+
+ ram16_2sum data_ram_i ( .clock(clock),.write(strobe_in),.wr_addr(data_wr_addr),.wr_data(signal_in_i),
+ .rd_addr1(data_rd_addr1),.rd_addr2(data_rd_addr2),.rd_data(data_ram_out_i_b),.sum(data_ram_out_i));
+
+ ram16_2sum data_ram_q ( .clock(clock),.write(strobe_in),.wr_addr(data_wr_addr),.wr_data(signal_in_q),
+ .rd_addr1(data_rd_addr1),.rd_addr2(data_rd_addr2),.rd_data(data_ram_out_q));
+
+ mac mac_i (.clock(clock),.reset(reset),.enable(~filt_done),.clear(strobe_in),
+ .x(data_ram_out_i),.y(coeff_ram_out),.shift(shift),.z(mac_out_i) );
+
+ mac mac_q (.clock(clock),.reset(reset),.enable(~filt_done),.clear(strobe_in),
+ .x(data_ram_out_q),.y(coeff_ram_out),.shift(shift),.z(mac_out_q) );
+
+endmodule // halfband_interp
diff --git a/fpga/usrp1/sdr_lib/hb/hbd_tb/HBD b/fpga/usrp1/sdr_lib/hb/hbd_tb/HBD
new file mode 100644
index 000000000..574fbba91
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/hbd_tb/HBD
@@ -0,0 +1,80 @@
+*-6.432683 5736 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
+@28
+test_hbd.clock
+test_hbd.reset
+@420
+test_hbd.halfband_decim.middle_data[15:0]
+@22
+test_hbd.halfband_decim.sum_even[33:0]
+test_hbd.halfband_decim.base_addr[3:0]
+@420
+test_hbd.i_in[15:0]
+@24
+test_hbd.halfband_decim.phase[3:0]
+test_hbd.halfband_decim.ram16_even.rd_addr1[3:0]
+test_hbd.halfband_decim.ram16_even.rd_addr2[3:0]
+test_hbd.halfband_decim.ram16_even.wr_addr[3:0]
+test_hbd.halfband_decim.ram16_even.wr_data[15:0]
+@28
+test_hbd.halfband_decim.ram16_even.write
+@420
+test_hbd.halfband_decim.sum[15:0]
+test_hbd.halfband_decim.product[30:0]
+test_hbd.halfband_decim.dout[33:0]
+test_hbd.halfband_decim.sum_even[33:0]
+@22
+test_hbd.halfband_decim.acc.addend[30:0]
+@28
+test_hbd.halfband_decim.acc.reset
+@420
+test_hbd.halfband_decim.acc.sum[33:0]
+test_hbd.halfband_decim.mult.x[15:0]
+test_hbd.halfband_decim.mult.y[15:0]
+@28
+test_hbd.halfband_decim.acc.clear
+test_hbd.strobe_in
+test_hbd.strobe_out
+test_hbd.halfband_decim.acc_en
+@420
+test_hbd.i_out[15:0]
+@28
+test_hbd.halfband_decim.mult_en
+test_hbd.halfband_decim.latch_result
+@420
+test_hbd.halfband_decim.sum[15:0]
+test_hbd.halfband_decim.sum_even[33:0]
+test_hbd.halfband_decim.dout[33:0]
+test_hbd.halfband_decim.data_out[15:0]
+@22
+test_hbd.halfband_decim.data_out[15:0]
+@28
+test_hbd.halfband_decim.dout[33:0]
+@29
+test_hbd.halfband_decim.acc_en
+@22
+test_hbd.halfband_decim.base_addr[3:0]
+@28
+test_hbd.halfband_decim.clear
+test_hbd.halfband_decim.latch_result
+test_hbd.halfband_decim.mult_en
+test_hbd.halfband_decim.mult_en_pre
+@22
+test_hbd.halfband_decim.phase[3:0]
+@28
+test_hbd.halfband_decim.start
+test_hbd.halfband_decim.start_d1
+test_hbd.halfband_decim.start_d2
+test_hbd.halfband_decim.start_d3
+test_hbd.halfband_decim.start_d4
+test_hbd.halfband_decim.start_d5
+test_hbd.halfband_decim.start_d6
+test_hbd.halfband_decim.start_d7
+test_hbd.halfband_decim.start_d8
+test_hbd.halfband_decim.start_d9
+test_hbd.halfband_decim.start_dA
+test_hbd.halfband_decim.start_dB
+test_hbd.halfband_decim.start_dC
+test_hbd.halfband_decim.start_dD
+test_hbd.halfband_decim.store_odd
+test_hbd.halfband_decim.strobe_in
+test_hbd.halfband_decim.strobe_out
diff --git a/fpga/usrp1/sdr_lib/hb/hbd_tb/really_golden b/fpga/usrp1/sdr_lib/hb/hbd_tb/really_golden
new file mode 100644
index 000000000..2d24a9e14
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/hbd_tb/really_golden
@@ -0,0 +1,142 @@
+VCD info: dumpfile test_hbd.vcd opened for output.
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ x
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 8192
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+- 4
+ 18
+- 63
+ 167
+- 367
+ 737
+- 1539
+ 5146
+ 5146
+- 1539
+ 737
+- 367
+ 167
+- 63
+ 18
+- 4
+ 0
+ 0
+ 0
+ 0
+ 0
+- 4
+ 14
+- 49
+ 118
+- 249
+ 488
+ 7141
+12287
+17433
+15894
+16631
+16264
+16432
+16368
+16387
+16383
+16383
+16383
+16383
+16383
+16387
+16368
+16432
+16264
+16631
+15894
+ 9241
+ 4095
+- 1051
+ 488
+- 249
+ 118
+- 49
+ 14
+- 4
+ 0
+ 0
+ 0
+ 0
+ 0
+- 4
+ 14
+- 49
+ 118
+- 249
+ 488
+- 1051
+12287
+17433
+15894
+16631
+16264
+16432
+16368
+16387
+16383
+16383
+16383
+16383
+16383
+16387
+16368
+16432
+16264
+16631
+15894
+17433
+ 4095
+- 1051
+ 488
+- 249
+ 118
+- 49
+ 14
+- 4
+ 0
+ 0
+ 0
+ 0
diff --git a/fpga/usrp1/sdr_lib/hb/hbd_tb/regression b/fpga/usrp1/sdr_lib/hb/hbd_tb/regression
new file mode 100644
index 000000000..fc279c2f2
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/hbd_tb/regression
@@ -0,0 +1,95 @@
+echo "Baseline 1000"
+iverilog -y .. -o test_hbd -DRATE=1000 test_hbd.v ; ./test_hbd >golden
+diff golden really_golden
+
+echo
+echo "Test 100"
+iverilog -y .. -o test_hbd -DRATE=100 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 50"
+iverilog -y .. -o test_hbd -DRATE=50 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 40"
+iverilog -y .. -o test_hbd -DRATE=40 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 30"
+iverilog -y .. -o test_hbd -DRATE=30 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 25"
+iverilog -y .. -o test_hbd -DRATE=25 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 20"
+iverilog -y .. -o test_hbd -DRATE=20 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 19"
+iverilog -y .. -o test_hbd -DRATE=19 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 18"
+iverilog -y .. -o test_hbd -DRATE=18 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 17"
+iverilog -y .. -o test_hbd -DRATE=17 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 16"
+iverilog -y .. -o test_hbd -DRATE=16 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 15"
+iverilog -y .. -o test_hbd -DRATE=15 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 14"
+iverilog -y .. -o test_hbd -DRATE=14 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 13"
+iverilog -y .. -o test_hbd -DRATE=13 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 12"
+iverilog -y .. -o test_hbd -DRATE=12 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 11"
+iverilog -y .. -o test_hbd -DRATE=11 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 10"
+iverilog -y .. -o test_hbd -DRATE=10 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 9"
+iverilog -y .. -o test_hbd -DRATE=9 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 8"
+iverilog -y .. -o test_hbd -DRATE=8 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 7"
+iverilog -y .. -o test_hbd -DRATE=7 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 6"
+iverilog -y .. -o test_hbd -DRATE=6 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 5"
+iverilog -y .. -o test_hbd -DRATE=5 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 4"
+iverilog -y .. -o test_hbd -DRATE=4 test_hbd.v ; ./test_hbd >output ; diff output golden
+
+echo
+echo "Test 3"
+iverilog -y .. -o test_hbd -DRATE=3 test_hbd.v ; ./test_hbd >output ; diff output golden
diff --git a/fpga/usrp1/sdr_lib/hb/hbd_tb/run_hbd b/fpga/usrp1/sdr_lib/hb/hbd_tb/run_hbd
new file mode 100755
index 000000000..b8aec7574
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/hbd_tb/run_hbd
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+iverilog -y .. -o test_hbd test_hbd.v
+./test_hbd
diff --git a/fpga/usrp1/sdr_lib/hb/hbd_tb/test_hbd.v b/fpga/usrp1/sdr_lib/hb/hbd_tb/test_hbd.v
new file mode 100644
index 000000000..01ab5e7e0
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/hbd_tb/test_hbd.v
@@ -0,0 +1,75 @@
+
+
+module test_hbd();
+
+ reg clock;
+ initial clock = 1'b0;
+ always #5 clock <= ~clock;
+
+ reg reset;
+ initial reset = 1'b1;
+ initial #1000 reset = 1'b0;
+
+ initial $dumpfile("test_hbd.vcd");
+ initial $dumpvars(0,test_hbd);
+
+ reg [15:0] i_in, q_in;
+ wire [15:0] i_out, q_out;
+
+ reg strobe_in;
+ wire strobe_out;
+ reg coeff_write;
+ reg [15:0] coeff_data;
+ reg [4:0] coeff_addr;
+
+ halfband_decim halfband_decim
+ ( .clock(clock),.reset(reset),.enable(),.strobe_in(strobe_in),.strobe_out(strobe_out),
+ .data_in(i_in),.data_out(i_out) );
+
+ always @(posedge strobe_out)
+ if(i_out[15])
+ $display("-%d",65536-i_out);
+ else
+ $display("%d",i_out);
+
+ initial
+ begin
+ strobe_in = 1'b0;
+ @(negedge reset);
+ @(posedge clock);
+ while(1)
+ begin
+ strobe_in <= #1 1'b1;
+ @(posedge clock);
+ strobe_in <= #1 1'b0;
+ repeat (`RATE)
+ @(posedge clock);
+ end
+ end
+
+ initial #10000000 $finish; // Just in case...
+
+ initial
+ begin
+ i_in <= #1 16'd0;
+ repeat (40) @(posedge strobe_in);
+ i_in <= #1 16'd16384;
+ @(posedge strobe_in);
+ i_in <= #1 16'd0;
+ repeat (40) @(posedge strobe_in);
+ i_in <= #1 16'd16384;
+ @(posedge strobe_in);
+ i_in <= #1 16'd0;
+ repeat (40) @(posedge strobe_in);
+ i_in <= #1 16'd16384;
+ repeat (40) @(posedge strobe_in);
+ i_in <= #1 16'd0;
+ repeat (41) @(posedge strobe_in);
+ i_in <= #1 16'd16384;
+ repeat (40) @(posedge strobe_in);
+ i_in <= #1 16'd0;
+ repeat (40) @(posedge strobe_in);
+ repeat (7) @(posedge clock);
+ $finish;
+ end // initial begin
+endmodule // test_hb
diff --git a/fpga/usrp1/sdr_lib/hb/mac.v b/fpga/usrp1/sdr_lib/hb/mac.v
new file mode 100644
index 000000000..5a270bc73
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/mac.v
@@ -0,0 +1,58 @@
+
+
+module mac (input clock, input reset, input enable, input clear,
+ input signed [15:0] x, input signed [15:0] y,
+ input [7:0] shift, output [15:0] z );
+
+ reg signed [30:0] product;
+ reg signed [39:0] z_int;
+ reg signed [15:0] z_shift;
+
+ reg enable_d1;
+ always @(posedge clock)
+ enable_d1 <= #1 enable;
+
+ always @(posedge clock)
+ if(reset | clear)
+ z_int <= #1 40'd0;
+ else if(enable_d1)
+ z_int <= #1 z_int + {{9{product[30]}},product};
+
+ always @(posedge clock)
+ product <= #1 x*y;
+
+ always @* // FIXME full case? parallel case?
+ case(shift)
+ //8'd0 : z_shift <= z_int[39:24];
+ //8'd1 : z_shift <= z_int[38:23];
+ //8'd2 : z_shift <= z_int[37:22];
+ //8'd3 : z_shift <= z_int[36:21];
+ //8'd4 : z_shift <= z_int[35:20];
+ //8'd5 : z_shift <= z_int[34:19];
+ 8'd6 : z_shift <= z_int[33:18];
+ 8'd7 : z_shift <= z_int[32:17];
+ 8'd8 : z_shift <= z_int[31:16];
+ 8'd9 : z_shift <= z_int[30:15];
+ 8'd10 : z_shift <= z_int[29:14];
+ 8'd11 : z_shift <= z_int[28:13];
+ //8'd12 : z_shift <= z_int[27:12];
+ //8'd13 : z_shift <= z_int[26:11];
+ //8'd14 : z_shift <= z_int[25:10];
+ //8'd15 : z_shift <= z_int[24:9];
+ //8'd16 : z_shift <= z_int[23:8];
+ //8'd17 : z_shift <= z_int[22:7];
+ //8'd18 : z_shift <= z_int[21:6];
+ //8'd19 : z_shift <= z_int[20:5];
+ //8'd20 : z_shift <= z_int[19:4];
+ //8'd21 : z_shift <= z_int[18:3];
+ //8'd22 : z_shift <= z_int[17:2];
+ //8'd23 : z_shift <= z_int[16:1];
+ //8'd24 : z_shift <= z_int[15:0];
+ default : z_shift <= z_int[15:0];
+ endcase // case(shift)
+
+ // FIXME do we need to saturate?
+ //assign z = z_shift;
+ assign z = z_int[15:0];
+
+endmodule // mac
diff --git a/fpga/usrp1/sdr_lib/hb/mult.v b/fpga/usrp1/sdr_lib/hb/mult.v
new file mode 100644
index 000000000..a8d4cb1b7
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/mult.v
@@ -0,0 +1,16 @@
+
+
+module mult (input clock, input signed [15:0] x, input signed [15:0] y, output reg signed [30:0] product,
+ input enable_in, output reg enable_out );
+
+ always @(posedge clock)
+ if(enable_in)
+ product <= #1 x*y;
+ else
+ product <= #1 31'd0;
+
+ always @(posedge clock)
+ enable_out <= #1 enable_in;
+
+endmodule // mult
+
diff --git a/fpga/usrp1/sdr_lib/hb/ram16_2port.v b/fpga/usrp1/sdr_lib/hb/ram16_2port.v
new file mode 100644
index 000000000..e1761a926
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/ram16_2port.v
@@ -0,0 +1,22 @@
+
+
+module ram16_2port (input clock, input write,
+ input [3:0] wr_addr, input [15:0] wr_data,
+ input [3:0] rd_addr1, output reg [15:0] rd_data1,
+ input [3:0] rd_addr2, output reg [15:0] rd_data2);
+
+ reg [15:0] ram_array [0:31];
+
+ always @(posedge clock)
+ rd_data1 <= #1 ram_array[rd_addr1];
+
+ always @(posedge clock)
+ rd_data2 <= #1 ram_array[rd_addr2];
+
+ always @(posedge clock)
+ if(write)
+ ram_array[wr_addr] <= #1 wr_data;
+
+endmodule // ram16_2port
+
+
diff --git a/fpga/usrp1/sdr_lib/hb/ram16_2sum.v b/fpga/usrp1/sdr_lib/hb/ram16_2sum.v
new file mode 100644
index 000000000..559b06fd5
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/ram16_2sum.v
@@ -0,0 +1,27 @@
+
+
+module ram16_2sum (input clock, input write,
+ input [3:0] wr_addr, input [15:0] wr_data,
+ input [3:0] rd_addr1, input [3:0] rd_addr2,
+ output reg [15:0] sum);
+
+ reg signed [15:0] ram_array [0:15];
+ reg signed [15:0] a,b;
+ wire signed [16:0] sum_int;
+
+ always @(posedge clock)
+ if(write)
+ ram_array[wr_addr] <= #1 wr_data;
+
+ always @(posedge clock)
+ begin
+ a <= #1 ram_array[rd_addr1];
+ b <= #1 ram_array[rd_addr2];
+ end
+
+ assign sum_int = {a[15],a} + {b[15],b};
+
+ always @(posedge clock)
+ sum <= #1 sum_int[16:1] + (sum_int[16]&sum_int[0]);
+
+endmodule // ram16_2sum
diff --git a/fpga/usrp1/sdr_lib/hb/ram32_2sum.v b/fpga/usrp1/sdr_lib/hb/ram32_2sum.v
new file mode 100644
index 000000000..d1f55b7d0
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/hb/ram32_2sum.v
@@ -0,0 +1,22 @@
+
+
+module ram32_2sum (input clock, input write,
+ input [4:0] wr_addr, input [15:0] wr_data,
+ input [4:0] rd_addr1, input [4:0] rd_addr2,
+ output reg [15:0] sum);
+
+ reg [15:0] ram_array [0:31];
+ wire [16:0] sum_int;
+
+ always @(posedge clock)
+ if(write)
+ ram_array[wr_addr] <= #1 wr_data;
+
+ assign sum_int = ram_array[rd_addr1] + ram_array[rd_addr2];
+
+ always @(posedge clock)
+ sum <= #1 sum_int[16:1] + (sum_int[16]&sum_int[0]);
+
+
+endmodule // ram32_2sum
+
diff --git a/fpga/usrp1/sdr_lib/io_pins.v b/fpga/usrp1/sdr_lib/io_pins.v
new file mode 100644
index 000000000..ad1b7b4a8
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/io_pins.v
@@ -0,0 +1,52 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2005,2006 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+`include "../../firmware/include/fpga_regs_common.v"
+`include "../../firmware/include/fpga_regs_standard.v"
+
+module io_pins
+ ( inout wire [15:0] io_0, inout wire [15:0] io_1, inout wire [15:0] io_2, inout wire [15:0] io_3,
+ input wire [15:0] reg_0, input wire [15:0] reg_1, input wire [15:0] reg_2, input wire [15:0] reg_3,
+ input clock, input rx_reset, input tx_reset,
+ input [6:0] serial_addr, input [31:0] serial_data, input serial_strobe);
+
+ reg [15:0] io_0_oe,io_1_oe,io_2_oe,io_3_oe;
+
+ bidir_reg bidir_reg_0 (.tristate(io_0),.oe(io_0_oe),.reg_val(reg_0));
+ bidir_reg bidir_reg_1 (.tristate(io_1),.oe(io_1_oe),.reg_val(reg_1));
+ bidir_reg bidir_reg_2 (.tristate(io_2),.oe(io_2_oe),.reg_val(reg_2));
+ bidir_reg bidir_reg_3 (.tristate(io_3),.oe(io_3_oe),.reg_val(reg_3));
+
+ // Upper 16 bits are mask for lower 16
+ always @(posedge clock)
+ if(serial_strobe)
+ case(serial_addr)
+ `FR_OE_0 : io_0_oe
+ <= #1 (io_0_oe & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
+ `FR_OE_1 : io_1_oe
+ <= #1 (io_1_oe & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
+ `FR_OE_2 : io_2_oe
+ <= #1 (io_2_oe & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
+ `FR_OE_3 : io_3_oe
+ <= #1 (io_3_oe & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
+ endcase // case(serial_addr)
+
+endmodule // io_pins
diff --git a/fpga/usrp1/sdr_lib/master_control.v b/fpga/usrp1/sdr_lib/master_control.v
new file mode 100644
index 000000000..3bce55f23
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/master_control.v
@@ -0,0 +1,163 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003,2005 Matt Ettus
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// Clock, enable, and reset controls for whole system
+
+module master_control
+ ( input master_clk, input usbclk,
+ input wire [6:0] serial_addr, input wire [31:0] serial_data, input wire serial_strobe,
+ output tx_bus_reset, output rx_bus_reset,
+ output wire tx_dsp_reset, output wire rx_dsp_reset,
+ output wire enable_tx, output wire enable_rx,
+ output wire [7:0] interp_rate, output wire [7:0] decim_rate,
+ output tx_sample_strobe, output strobe_interp,
+ output rx_sample_strobe, output strobe_decim,
+ input tx_empty,
+ input wire [15:0] debug_0,input wire [15:0] debug_1,input wire [15:0] debug_2,input wire [15:0] debug_3,
+ output wire [15:0] reg_0, output wire [15:0] reg_1, output wire [15:0] reg_2, output wire [15:0] reg_3
+ );
+
+ // FIXME need a separate reset for all control settings
+ // Master Controls assignments
+ wire [7:0] master_controls;
+ setting_reg #(`FR_MASTER_CTRL) sr_mstr_ctrl(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(master_controls));
+ assign enable_tx = master_controls[0];
+ assign enable_rx = master_controls[1];
+ assign tx_dsp_reset = master_controls[2];
+ assign rx_dsp_reset = master_controls[3];
+ // Unused - 4-7
+
+ // Strobe Generators
+ setting_reg #(`FR_INTERP_RATE) sr_interp(.clock(master_clk),.reset(tx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(interp_rate));
+ setting_reg #(`FR_DECIM_RATE) sr_decim(.clock(master_clk),.reset(rx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(decim_rate));
+
+ strobe_gen da_strobe_gen
+ ( .clock(master_clk),.reset(tx_dsp_reset),.enable(enable_tx),
+ .rate(8'd1),.strobe_in(1'b1),.strobe(tx_sample_strobe) );
+
+ strobe_gen tx_strobe_gen
+ ( .clock(master_clk),.reset(tx_dsp_reset),.enable(enable_tx),
+ .rate(interp_rate),.strobe_in(tx_sample_strobe),.strobe(strobe_interp) );
+
+ assign rx_sample_strobe = 1'b1;
+
+ strobe_gen decim_strobe_gen
+ ( .clock(master_clk),.reset(rx_dsp_reset),.enable(enable_rx),
+ .rate(decim_rate),.strobe_in(rx_sample_strobe),.strobe(strobe_decim) );
+
+ // Reset syncs for bus (usbclk) side
+ // The RX bus side reset isn't used, the TX bus side one may not be needed
+ reg tx_reset_bus_sync1, rx_reset_bus_sync1, tx_reset_bus_sync2, rx_reset_bus_sync2;
+
+ always @(posedge usbclk)
+ begin
+ tx_reset_bus_sync1 <= #1 tx_dsp_reset;
+ rx_reset_bus_sync1 <= #1 rx_dsp_reset;
+ tx_reset_bus_sync2 <= #1 tx_reset_bus_sync1;
+ rx_reset_bus_sync2 <= #1 rx_reset_bus_sync1;
+ end
+
+ assign tx_bus_reset = tx_reset_bus_sync2;
+ assign rx_bus_reset = rx_reset_bus_sync2;
+
+ wire [7:0] txa_refclk, rxa_refclk, txb_refclk, rxb_refclk;
+ wire txaclk,txbclk,rxaclk,rxbclk;
+ wire [3:0] debug_en, txcvr_ctrl;
+
+ wire [31:0] txcvr_rxlines, txcvr_txlines;
+
+ setting_reg #(`FR_TX_A_REFCLK) sr_txaref(.clock(master_clk),.reset(tx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(txa_refclk));
+ setting_reg #(`FR_RX_A_REFCLK) sr_rxaref(.clock(master_clk),.reset(rx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(rxa_refclk));
+ setting_reg #(`FR_TX_B_REFCLK) sr_txbref(.clock(master_clk),.reset(tx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(txb_refclk));
+ setting_reg #(`FR_RX_B_REFCLK) sr_rxbref(.clock(master_clk),.reset(rx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(rxb_refclk));
+
+ setting_reg #(`FR_DEBUG_EN) sr_debugen(.clock(master_clk),.reset(rx_dsp_reset|tx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(debug_en));
+
+ clk_divider clk_div_0 (.reset(tx_dsp_reset),.in_clk(master_clk),.out_clk(txaclk),.ratio(txa_refclk[6:0]));
+ clk_divider clk_div_1 (.reset(rx_dsp_reset),.in_clk(master_clk),.out_clk(rxaclk),.ratio(rxa_refclk[6:0]));
+ clk_divider clk_div_2 (.reset(tx_dsp_reset),.in_clk(master_clk),.out_clk(txbclk),.ratio(txb_refclk[6:0]));
+ clk_divider clk_div_3 (.reset(rx_dsp_reset),.in_clk(master_clk),.out_clk(rxbclk),.ratio(rxb_refclk[6:0]));
+
+ reg [15:0] io_0_reg,io_1_reg,io_2_reg,io_3_reg;
+ // Upper 16 bits are mask for lower 16
+ always @(posedge master_clk)
+ if(serial_strobe)
+ case(serial_addr)
+ `FR_IO_0 : io_0_reg
+ <= #1 (io_0_reg & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
+ `FR_IO_1 : io_1_reg
+ <= #1 (io_1_reg & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
+ `FR_IO_2 : io_2_reg
+ <= #1 (io_2_reg & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
+ `FR_IO_3 : io_3_reg
+ <= #1 (io_3_reg & ~serial_data[31:16]) | (serial_data[15:0] & serial_data[31:16] );
+ endcase // case(serial_addr)
+
+ wire transmit_now;
+ wire atr_ctl;
+ wire [11:0] atr_tx_delay, atr_rx_delay;
+ wire [15:0] atr_mask_0, atr_txval_0, atr_rxval_0, atr_mask_1, atr_txval_1, atr_rxval_1, atr_mask_2, atr_txval_2, atr_rxval_2, atr_mask_3, atr_txval_3, atr_rxval_3;
+
+ setting_reg #(`FR_ATR_MASK_0) sr_atr_mask_0(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_mask_0));
+ setting_reg #(`FR_ATR_TXVAL_0) sr_atr_txval_0(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_txval_0));
+ setting_reg #(`FR_ATR_RXVAL_0) sr_atr_rxval_0(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_rxval_0));
+
+ setting_reg #(`FR_ATR_MASK_1) sr_atr_mask_1(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_mask_1));
+ setting_reg #(`FR_ATR_TXVAL_1) sr_atr_txval_1(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_txval_1));
+ setting_reg #(`FR_ATR_RXVAL_1) sr_atr_rxval_1(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_rxval_1));
+
+ setting_reg #(`FR_ATR_MASK_2) sr_atr_mask_2(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_mask_2));
+ setting_reg #(`FR_ATR_TXVAL_2) sr_atr_txval_2(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_txval_2));
+ setting_reg #(`FR_ATR_RXVAL_2) sr_atr_rxval_2(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_rxval_2));
+
+ setting_reg #(`FR_ATR_MASK_3) sr_atr_mask_3(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_mask_3));
+ setting_reg #(`FR_ATR_TXVAL_3) sr_atr_txval_3(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_txval_3));
+ setting_reg #(`FR_ATR_RXVAL_3) sr_atr_rxval_3(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_rxval_3));
+
+ //setting_reg #(`FR_ATR_CTL) sr_atr_ctl(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_ctl));
+ setting_reg #(`FR_ATR_TX_DELAY) sr_atr_tx_delay(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_tx_delay));
+ setting_reg #(`FR_ATR_RX_DELAY) sr_atr_rx_delay(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(atr_rx_delay));
+
+ assign atr_ctl = 1'b1;
+
+ atr_delay atr_delay(.clk_i(master_clk),.rst_i(tx_dsp_reset),.ena_i(atr_ctl),.tx_empty_i(tx_empty),
+ .tx_delay_i(atr_tx_delay),.rx_delay_i(atr_rx_delay),.atr_tx_o(transmit_now));
+
+ wire [15:0] atr_selected_0 = transmit_now ? atr_txval_0 : atr_rxval_0;
+ wire [15:0] io_0 = ({{16{atr_ctl}}} & atr_mask_0 & atr_selected_0) | (~({{16{atr_ctl}}} & atr_mask_0) & io_0_reg);
+
+ wire [15:0] atr_selected_1 = transmit_now ? atr_txval_1 : atr_rxval_1;
+ wire [15:0] io_1 = ({{16{atr_ctl}}} & atr_mask_1 & atr_selected_1) | (~({{16{atr_ctl}}} & atr_mask_1) & io_1_reg);
+
+ wire [15:0] atr_selected_2 = transmit_now ? atr_txval_2 : atr_rxval_2;
+ wire [15:0] io_2 = ({{16{atr_ctl}}} & atr_mask_2 & atr_selected_2) | (~({{16{atr_ctl}}} & atr_mask_2) & io_2_reg);
+
+ wire [15:0] atr_selected_3 = transmit_now ? atr_txval_3 : atr_rxval_3;
+ wire [15:0] io_3 = ({{16{atr_ctl}}} & atr_mask_3 & atr_selected_3) | (~({{16{atr_ctl}}} & atr_mask_3) & io_3_reg);
+
+ assign reg_0 = debug_en[0] ? debug_0 : txa_refclk[7] ? {io_0[15:1],txaclk} : io_0;
+ assign reg_1 = debug_en[1] ? debug_1 : rxa_refclk[7] ? {io_1[15:1],rxaclk} : io_1;
+ assign reg_2 = debug_en[2] ? debug_2 : txb_refclk[7] ? {io_2[15:1],txbclk} : io_2;
+ assign reg_3 = debug_en[3] ? debug_3 : rxb_refclk[7] ? {io_3[15:1],rxbclk} : io_3;
+
+
+endmodule // master_control
diff --git a/fpga/usrp1/sdr_lib/master_control_multi.v b/fpga/usrp1/sdr_lib/master_control_multi.v
new file mode 100644
index 000000000..cab96a79f
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/master_control_multi.v
@@ -0,0 +1,73 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2006 Martin Dudok van Heel
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+`include "config.vh"
+`include "../../../firmware/include/fpga_regs_common.v"
+`include "../../../firmware/include/fpga_regs_standard.v"
+// Clock, enable, and reset controls for whole system
+// Modified version to enable multi_usrp synchronisation
+
+module master_control_multi
+ ( input master_clk, input usbclk,
+ input wire [6:0] serial_addr, input wire [31:0] serial_data, input wire serial_strobe,
+ input wire rx_slave_sync,
+ output tx_bus_reset, output rx_bus_reset,
+ output wire tx_dsp_reset, output wire rx_dsp_reset,
+ output wire enable_tx, output wire enable_rx,
+ output wire sync_rx,
+ output wire [7:0] interp_rate, output wire [7:0] decim_rate,
+ output tx_sample_strobe, output strobe_interp,
+ output rx_sample_strobe, output strobe_decim,
+ input tx_empty,
+ input wire [15:0] debug_0,input wire [15:0] debug_1,input wire [15:0] debug_2,input wire [15:0] debug_3,
+ output wire [15:0] reg_0, output wire [15:0] reg_1, output wire [15:0] reg_2, output wire [15:0] reg_3
+ );
+
+ wire [15:0] reg_1_std;
+
+ master_control master_control_standard
+ ( .master_clk(master_clk),.usbclk(usbclk),
+ .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset),
+ .tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset),
+ .enable_tx(enable_tx),.enable_rx(enable_rx),
+ .interp_rate(interp_rate),.decim_rate(decim_rate),
+ .tx_sample_strobe(tx_sample_strobe),.strobe_interp(strobe_interp),
+ .rx_sample_strobe(rx_sample_strobe),.strobe_decim(strobe_decim),
+ .tx_empty(tx_empty),
+ .debug_0(debug_0),.debug_1(debug_1),
+ .debug_2(debug_2),.debug_3(debug_3),
+ .reg_0(reg_0),.reg_1(reg_1_std),.reg_2(reg_2),.reg_3(reg_3) );
+
+ // FIXME need a separate reset for all control settings
+ // Master/slave Controls assignments
+ wire [7:0] rx_master_slave_controls;
+ setting_reg_masked #(`FR_RX_MASTER_SLAVE) sr_rx_mstr_slv_ctrl(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(rx_master_slave_controls));
+
+ assign sync_rx = rx_master_slave_controls[`bitnoFR_RX_SYNC] | (rx_master_slave_controls[`bitnoFR_RX_SYNC_SLAVE] & rx_slave_sync);
+ //sync if we are told by master_control or if we get a hardware slave sync
+ //TODO There can be a one sample difference between master and slave sync.
+ // Maybe use a register for sync_rx which uses the (neg or pos) edge of master_clock and/or rx_slave_sync to trigger
+ // Or even use a seperate sync_rx_out and sync_rx_internal (which lags behind)
+ //TODO make output pin not hardwired
+assign reg_1 ={(rx_master_slave_controls[`bitnoFR_RX_SYNC_MASTER])? sync_rx:reg_1_std[15],reg_1_std[14:0]};
+
+
+endmodule // master_control
diff --git a/fpga/usrp1/sdr_lib/phase_acc.v b/fpga/usrp1/sdr_lib/phase_acc.v
new file mode 100755
index 000000000..f44853d36
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/phase_acc.v
@@ -0,0 +1,52 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+
+// Basic Phase accumulator for DDS
+
+
+module phase_acc (clk,reset,enable,strobe,serial_addr,serial_data,serial_strobe,phase);
+ parameter FREQADDR = 0;
+ parameter PHASEADDR = 0;
+ parameter resolution = 32;
+
+ input clk, reset, enable, strobe;
+ input [6:0] serial_addr;
+ input [31:0] serial_data;
+ input serial_strobe;
+
+ output reg [resolution-1:0] phase;
+ wire [resolution-1:0] freq;
+
+ setting_reg #(FREQADDR) sr_rxfreq0(.clock(clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(freq));
+
+ always @(posedge clk)
+ if(reset)
+ phase <= #1 32'b0;
+ else if(serial_strobe & (serial_addr == PHASEADDR))
+ phase <= #1 serial_data;
+ else if(enable & strobe)
+ phase <= #1 phase + freq;
+
+endmodule // phase_acc
+
+
diff --git a/fpga/usrp1/sdr_lib/ram.v b/fpga/usrp1/sdr_lib/ram.v
new file mode 100644
index 000000000..fb64cdeae
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/ram.v
@@ -0,0 +1,16 @@
+
+
+module ram (input clock, input write,
+ input [4:0] wr_addr, input [15:0] wr_data,
+ input [4:0] rd_addr, output reg [15:0] rd_data);
+
+ reg [15:0] ram_array [0:31];
+
+ always @(posedge clock)
+ rd_data <= #1 ram_array[rd_addr];
+
+ always @(posedge clock)
+ if(write)
+ ram_array[wr_addr] <= #1 wr_data;
+
+endmodule // ram
diff --git a/fpga/usrp1/sdr_lib/ram16.v b/fpga/usrp1/sdr_lib/ram16.v
new file mode 100644
index 000000000..0c93da2be
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/ram16.v
@@ -0,0 +1,17 @@
+
+
+module ram16 (input clock, input write,
+ input [3:0] wr_addr, input [15:0] wr_data,
+ input [3:0] rd_addr, output reg [15:0] rd_data);
+
+ reg [15:0] ram_array [0:15];
+
+ always @(posedge clock)
+ rd_data <= #1 ram_array[rd_addr];
+
+ always @(posedge clock)
+ if(write)
+ ram_array[wr_addr] <= #1 wr_data;
+
+endmodule // ram16
+
diff --git a/fpga/usrp1/sdr_lib/ram32.v b/fpga/usrp1/sdr_lib/ram32.v
new file mode 100644
index 000000000..064e2735a
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/ram32.v
@@ -0,0 +1,17 @@
+
+
+module ram32 (input clock, input write,
+ input [4:0] wr_addr, input [15:0] wr_data,
+ input [4:0] rd_addr, output reg [15:0] rd_data);
+
+ reg [15:0] ram_array [0:31];
+
+ always @(posedge clock)
+ rd_data <= #1 ram_array[rd_addr];
+
+ always @(posedge clock)
+ if(write)
+ ram_array[wr_addr] <= #1 wr_data;
+
+endmodule // ram32
+
diff --git a/fpga/usrp1/sdr_lib/ram64.v b/fpga/usrp1/sdr_lib/ram64.v
new file mode 100644
index 000000000..084545808
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/ram64.v
@@ -0,0 +1,16 @@
+
+
+module ram64 (input clock, input write,
+ input [5:0] wr_addr, input [15:0] wr_data,
+ input [5:0] rd_addr, output reg [15:0] rd_data);
+
+ reg [15:0] ram_array [0:63];
+
+ always @(posedge clock)
+ rd_data <= #1 ram_array[rd_addr];
+
+ always @(posedge clock)
+ if(write)
+ ram_array[wr_addr] <= #1 wr_data;
+
+endmodule // ram64
diff --git a/fpga/usrp1/sdr_lib/rssi.v b/fpga/usrp1/sdr_lib/rssi.v
new file mode 100644
index 000000000..e45e2148c
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/rssi.v
@@ -0,0 +1,30 @@
+
+
+module rssi (input clock, input reset, input enable,
+ input [11:0] adc, output [15:0] rssi, output [15:0] over_count);
+
+ wire over_hi = (adc == 12'h7FF);
+ wire over_lo = (adc == 12'h800);
+ wire over = over_hi | over_lo;
+
+ reg [25:0] over_count_int;
+ always @(posedge clock)
+ if(reset | ~enable)
+ over_count_int <= #1 26'd0;
+ else
+ over_count_int <= #1 over_count_int + (over ? 26'd65535 : 26'd0) - over_count_int[25:10];
+
+ assign over_count = over_count_int[25:10];
+
+ wire [11:0] abs_adc = adc[11] ? ~adc : adc;
+
+ reg [25:0] rssi_int;
+ always @(posedge clock)
+ if(reset | ~enable)
+ rssi_int <= #1 26'd0;
+ else
+ rssi_int <= #1 rssi_int + abs_adc - rssi_int[25:10];
+
+ assign rssi = rssi_int[25:10];
+
+endmodule // rssi
diff --git a/fpga/usrp1/sdr_lib/rx_buffer.v b/fpga/usrp1/sdr_lib/rx_buffer.v
new file mode 100644
index 000000000..d17294b98
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/rx_buffer.v
@@ -0,0 +1,237 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// Interface to Cypress FX2 bus
+// A packet is 512 Bytes, the fifo has 4096 lines of 18 bits each
+
+`include "../../firmware/include/fpga_regs_common.v"
+`include "../../firmware/include/fpga_regs_standard.v"
+
+module rx_buffer
+ ( // Read/USB side
+ input usbclk,
+ input bus_reset,
+ output [15:0] usbdata,
+ input RD,
+ output reg have_pkt_rdy,
+ output reg rx_overrun,
+ input clear_status,
+ // Write/DSP side
+ input rxclk,
+ input reset, // DSP side reset (used here), do not reset registers
+ input rxstrobe,
+ input wire [3:0] channels,
+ input wire [15:0] ch_0,
+ input wire [15:0] ch_1,
+ input wire [15:0] ch_2,
+ input wire [15:0] ch_3,
+ input wire [15:0] ch_4,
+ input wire [15:0] ch_5,
+ input wire [15:0] ch_6,
+ input wire [15:0] ch_7,
+ // Settings, on rxclk also
+ input [6:0] serial_addr, input [31:0] serial_data, input serial_strobe,
+ input reset_regs, //Only reset registers
+ output [31:0] debugbus
+ );
+
+ wire [15:0] fifodata, fifodata_8;
+ reg [15:0] fifodata_16;
+
+ wire [11:0] rxfifolevel;
+ wire rx_full;
+
+ wire bypass_hb, want_q;
+ wire [4:0] bitwidth;
+ wire [3:0] bitshift;
+
+ setting_reg #(`FR_RX_FORMAT) sr_rxformat(.clock(rxclk),.reset(reset_regs),
+ .strobe(serial_strobe),.addr(serial_addr),.in(serial_data),
+ .out({bypass_hb,want_q,bitwidth,bitshift}));
+
+ // USB Read Side of FIFO
+ always @(negedge usbclk)
+ have_pkt_rdy <= (rxfifolevel >= 256);
+
+ // 257 Bug Fix
+ reg [8:0] read_count;
+ always @(negedge usbclk)
+ if(bus_reset)
+ read_count <= 0;
+ else if(RD)
+ read_count <= read_count + 1;
+ else
+ read_count <= 0;
+
+ // FIFO
+ wire ch0_in, ch0_out, iq_out;
+ assign ch0_in = (phase == 1);
+
+ fifo_4k_18 rxfifo
+ ( // DSP Write Side
+ .data ( {ch0_in, phase[0], fifodata} ),
+ .wrreq (~rx_full & (phase != 0)),
+ .wrclk ( rxclk ),
+ .wrfull ( rx_full ),
+ .wrempty ( ),
+ .wrusedw ( ),
+ // USB Read Side
+ .q ( {ch0_out,iq_out,usbdata} ),
+ .rdreq ( RD & ~read_count[8] ),
+ .rdclk ( ~usbclk ),
+ .rdfull ( ),
+ .rdempty ( ),
+ .rdusedw ( rxfifolevel ),
+ // Async, shared
+ .aclr ( reset ) );
+
+ // DSP Write Side of FIFO
+ reg [15:0] ch_0_reg;
+ reg [15:0] ch_1_reg;
+ reg [15:0] ch_2_reg;
+ reg [15:0] ch_3_reg;
+ reg [15:0] ch_4_reg;
+ reg [15:0] ch_5_reg;
+ reg [15:0] ch_6_reg;
+ reg [15:0] ch_7_reg;
+
+ always @(posedge rxclk)
+ if (rxstrobe)
+ begin
+ ch_0_reg <= ch_0;
+ ch_1_reg <= ch_1;
+ ch_2_reg <= ch_2;
+ ch_3_reg <= ch_3;
+ ch_4_reg <= ch_4;
+ ch_5_reg <= ch_5;
+ ch_6_reg <= ch_6;
+ ch_7_reg <= ch_7;
+ end
+
+ reg [3:0] phase;
+ always @(posedge rxclk)
+ if(reset)
+ phase <= 4'd0;
+ else if(phase == 0)
+ begin
+ if(rxstrobe)
+ phase <= 4'd1;
+ end
+ else if(~rx_full)
+ if(phase == ((bitwidth == 5'd8) ? (channels>>1) : channels))
+ phase <= 4'd0;
+ else
+ phase <= phase + 4'd1;
+
+ assign fifodata = (bitwidth == 5'd8) ? fifodata_8 : fifodata_16;
+
+ assign fifodata_8 = {round_8(top),round_8(bottom)};
+ reg [15:0] top,bottom;
+
+ function [7:0] round_8;
+ input [15:0] in_val;
+
+ round_8 = in_val[15:8] + (in_val[15] & |in_val[7:0]);
+ endfunction // round_8
+
+ always @*
+ case(phase)
+ 4'd1 : begin
+ bottom = ch_0_reg;
+ top = ch_1_reg;
+ end
+ 4'd2 : begin
+ bottom = ch_2_reg;
+ top = ch_3_reg;
+ end
+ 4'd3 : begin
+ bottom = ch_4_reg;
+ top = ch_5_reg;
+ end
+ 4'd4 : begin
+ bottom = ch_6_reg;
+ top = ch_7_reg;
+ end
+ default : begin
+ top = 16'hFFFF;
+ bottom = 16'hFFFF;
+ end
+ endcase // case(phase)
+
+ always @*
+ case(phase)
+ 4'd1 : fifodata_16 = ch_0_reg;
+ 4'd2 : fifodata_16 = ch_1_reg;
+ 4'd3 : fifodata_16 = ch_2_reg;
+ 4'd4 : fifodata_16 = ch_3_reg;
+ 4'd5 : fifodata_16 = ch_4_reg;
+ 4'd6 : fifodata_16 = ch_5_reg;
+ 4'd7 : fifodata_16 = ch_6_reg;
+ 4'd8 : fifodata_16 = ch_7_reg;
+ default : fifodata_16 = 16'hFFFF;
+ endcase // case(phase)
+
+ // Detect overrun
+ reg clear_status_dsp, rx_overrun_dsp;
+ always @(posedge rxclk)
+ clear_status_dsp <= clear_status;
+
+ always @(negedge usbclk)
+ rx_overrun <= rx_overrun_dsp;
+
+ always @(posedge rxclk)
+ if(reset)
+ rx_overrun_dsp <= 1'b0;
+ else if(rxstrobe & (phase != 0))
+ rx_overrun_dsp <= 1'b1;
+ else if(clear_status_dsp)
+ rx_overrun_dsp <= 1'b0;
+
+ // Debug bus
+ //
+ // 15:0 rxclk domain => TXA 15:0
+ // 31:16 usbclk domain => RXA 15:0
+
+ assign debugbus[0] = reset;
+ assign debugbus[1] = reset_regs;
+ assign debugbus[2] = rxstrobe;
+ assign debugbus[6:3] = channels;
+ assign debugbus[7] = rx_full;
+ assign debugbus[11:8] = phase;
+ assign debugbus[12] = ch0_in;
+ assign debugbus[13] = clear_status_dsp;
+ assign debugbus[14] = rx_overrun_dsp;
+ assign debugbus[15] = rxclk;
+
+ assign debugbus[16] = bus_reset;
+ assign debugbus[17] = RD;
+ assign debugbus[18] = have_pkt_rdy;
+ assign debugbus[19] = rx_overrun;
+ assign debugbus[20] = read_count[0];
+ assign debugbus[21] = read_count[8];
+ assign debugbus[22] = ch0_out;
+ assign debugbus[23] = iq_out;
+ assign debugbus[24] = clear_status;
+ assign debugbus[30:25] = 0;
+ assign debugbus[31] = usbclk;
+
+endmodule // rx_buffer
+
diff --git a/fpga/usrp1/sdr_lib/rx_chain.v b/fpga/usrp1/sdr_lib/rx_chain.v
new file mode 100644
index 000000000..bc4336e41
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/rx_chain.v
@@ -0,0 +1,106 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// Following defines conditionally include RX path circuitry
+
+`include "config.vh" // resolved relative to project root
+
+module rx_chain
+ (input clock,
+ input reset,
+ input enable,
+ input wire [7:0] decim_rate,
+ input sample_strobe,
+ input decimator_strobe,
+ output wire hb_strobe,
+ input [6:0] serial_addr, input [31:0] serial_data, input serial_strobe,
+ input wire [15:0] i_in,
+ input wire [15:0] q_in,
+ output wire [15:0] i_out,
+ output wire [15:0] q_out,
+ output wire [15:0] debugdata,output wire [15:0] debugctrl
+ );
+
+ parameter FREQADDR = 0;
+ parameter PHASEADDR = 0;
+
+ wire [31:0] phase;
+ wire [15:0] bb_i, bb_q;
+ wire [15:0] hb_in_i, hb_in_q;
+
+ assign debugdata = hb_in_i;
+
+`ifdef RX_NCO_ON
+ phase_acc #(FREQADDR,PHASEADDR,32) rx_phase_acc
+ (.clk(clock),.reset(reset),.enable(enable),
+ .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .strobe(sample_strobe),.phase(phase) );
+
+ cordic rx_cordic
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .xi(i_in),.yi(q_in),.zi(phase[31:16]),
+ .xo(bb_i),.yo(bb_q),.zo() );
+`else
+ assign bb_i = i_in;
+ assign bb_q = q_in;
+ assign sample_strobe = 1;
+`endif // !`ifdef RX_NCO_ON
+
+`ifdef RX_CIC_ON
+ cic_decim cic_decim_i_0
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+ .signal_in(bb_i),.signal_out(hb_in_i) );
+`else
+ assign hb_in_i = bb_i;
+ assign decimator_strobe = sample_strobe;
+`endif
+
+`ifdef RX_HB_ON
+ halfband_decim hbd_i_0
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .strobe_in(decimator_strobe),.strobe_out(hb_strobe),
+ .data_in(hb_in_i),.data_out(i_out),.debugctrl(debugctrl) );
+`else
+ assign i_out = hb_in_i;
+ assign hb_strobe = decimator_strobe;
+`endif
+
+`ifdef RX_CIC_ON
+ cic_decim cic_decim_q_0
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+ .signal_in(bb_q),.signal_out(hb_in_q) );
+`else
+ assign hb_in_q = bb_q;
+`endif
+
+`ifdef RX_HB_ON
+ halfband_decim hbd_q_0
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .strobe_in(decimator_strobe),.strobe_out(),
+ .data_in(hb_in_q),.data_out(q_out) );
+`else
+ assign q_out = hb_in_q;
+`endif
+
+
+endmodule // rx_chain
diff --git a/fpga/usrp1/sdr_lib/rx_chain_dual.v b/fpga/usrp1/sdr_lib/rx_chain_dual.v
new file mode 100644
index 000000000..d9d98f3fc
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/rx_chain_dual.v
@@ -0,0 +1,103 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module rx_chain_dual
+ (input clock,
+ input clock_2x,
+ input reset,
+ input enable,
+ input wire [7:0] decim_rate,
+ input sample_strobe,
+ input decimator_strobe,
+ input wire [31:0] freq0,
+ input wire [15:0] i_in0,
+ input wire [15:0] q_in0,
+ output wire [15:0] i_out0,
+ output wire [15:0] q_out0,
+ input wire [31:0] freq1,
+ input wire [15:0] i_in1,
+ input wire [15:0] q_in1,
+ output wire [15:0] i_out1,
+ output wire [15:0] q_out1
+ );
+
+ wire [15:0] phase;
+ wire [15:0] bb_i, bb_q;
+ wire [15:0] i_in, q_in;
+
+ wire [31:0] phase0;
+ wire [31:0] phase1;
+ reg [15:0] bb_i0, bb_q0;
+ reg [15:0] bb_i1, bb_q1;
+
+ // We want to time-share the CORDIC by double-clocking it
+
+ phase_acc rx_phase_acc_0
+ (.clk(clock),.reset(reset),.enable(enable),
+ .strobe(sample_strobe),.freq(freq0),.phase(phase0) );
+
+ phase_acc rx_phase_acc_1
+ (.clk(clock),.reset(reset),.enable(enable),
+ .strobe(sample_strobe),.freq(freq1),.phase(phase1) );
+
+ assign phase = clock ? phase0[31:16] : phase1[31:16];
+ assign i_in = clock ? i_in0 : i_in1;
+ assign q_in = clock ? q_in0 : q_in1;
+
+// This appears reversed because of the number of CORDIC stages
+ always @(posedge clock_2x)
+ if(clock)
+ begin
+ bb_i1 <= #1 bb_i;
+ bb_q1 <= #1 bb_q;
+ end
+ else
+ begin
+ bb_i0 <= #1 bb_i;
+ bb_q0 <= #1 bb_q;
+ end
+
+ cordic rx_cordic
+ ( .clock(clock_2x),.reset(reset),.enable(enable),
+ .xi(i_in),.yi(q_in),.zi(phase),
+ .xo(bb_i),.yo(bb_q),.zo() );
+
+ cic_decim cic_decim_i_0
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+ .signal_in(bb_i0),.signal_out(i_out0) );
+
+ cic_decim cic_decim_q_0
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+ .signal_in(bb_q0),.signal_out(q_out0) );
+
+ cic_decim cic_decim_i_1
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+ .signal_in(bb_i1),.signal_out(i_out1) );
+
+ cic_decim cic_decim_q_1
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+ .signal_in(bb_q1),.signal_out(q_out1) );
+
+endmodule // rx_chain
diff --git a/fpga/usrp1/sdr_lib/rx_dcoffset.v b/fpga/usrp1/sdr_lib/rx_dcoffset.v
new file mode 100644
index 000000000..3be475ed6
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/rx_dcoffset.v
@@ -0,0 +1,22 @@
+
+
+module rx_dcoffset (input clock, input enable, input reset,
+ input signed [15:0] adc_in, output signed [15:0] adc_out,
+ input wire [6:0] serial_addr, input wire [31:0] serial_data, input serial_strobe);
+ parameter MYADDR = 0;
+
+ reg signed [31:0] integrator;
+ wire signed [15:0] scaled_integrator = integrator[31:16] + (integrator[31] & |integrator[15:0]);
+ assign adc_out = adc_in - scaled_integrator;
+
+ // FIXME do we need signed?
+ //FIXME What do we do when clipping?
+ always @(posedge clock)
+ if(reset)
+ integrator <= #1 32'd0;
+ else if(serial_strobe & (MYADDR == serial_addr))
+ integrator <= #1 {serial_data[15:0],16'd0};
+ else if(enable)
+ integrator <= #1 integrator + adc_out;
+
+endmodule // rx_dcoffset
diff --git a/fpga/usrp1/sdr_lib/serial_io.v b/fpga/usrp1/sdr_lib/serial_io.v
new file mode 100644
index 000000000..62f92bed2
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/serial_io.v
@@ -0,0 +1,118 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003,2004 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+
+// Serial Control Bus from Cypress chip
+
+module serial_io
+ ( input master_clk,
+ input serial_clock,
+ input serial_data_in,
+ input enable,
+ input reset,
+ inout wire serial_data_out,
+ output reg [6:0] serial_addr,
+ output reg [31:0] serial_data,
+ output wire serial_strobe,
+ input wire [31:0] readback_0,
+ input wire [31:0] readback_1,
+ input wire [31:0] readback_2,
+ input wire [31:0] readback_3,
+ input wire [31:0] readback_4,
+ input wire [31:0] readback_5,
+ input wire [31:0] readback_6,
+ input wire [31:0] readback_7
+ );
+
+ reg is_read;
+ reg [7:0] ser_ctr;
+ reg write_done;
+
+ assign serial_data_out = is_read ? serial_data[31] : 1'bz;
+
+ always @(posedge serial_clock, posedge reset, negedge enable)
+ if(reset)
+ ser_ctr <= #1 8'd0;
+ else if(~enable)
+ ser_ctr <= #1 8'd0;
+ else if(ser_ctr == 39)
+ ser_ctr <= #1 8'd0;
+ else
+ ser_ctr <= #1 ser_ctr + 8'd1;
+
+ always @(posedge serial_clock, posedge reset, negedge enable)
+ if(reset)
+ is_read <= #1 1'b0;
+ else if(~enable)
+ is_read <= #1 1'b0;
+ else if((ser_ctr == 7)&&(serial_addr[6]==1))
+ is_read <= #1 1'b1;
+
+ always @(posedge serial_clock, posedge reset)
+ if(reset)
+ begin
+ serial_addr <= #1 7'b0;
+ serial_data <= #1 32'b0;
+ write_done <= #1 1'b0;
+ end
+ else if(~enable)
+ begin
+ //serial_addr <= #1 7'b0;
+ //serial_data <= #1 32'b0;
+ write_done <= #1 1'b0;
+ end
+ else
+ begin
+ if(~is_read && (ser_ctr == 39))
+ write_done <= #1 1'b1;
+ else
+ write_done <= #1 1'b0;
+ if(is_read & (ser_ctr==8))
+ case (serial_addr)
+ 7'd1: serial_data <= #1 readback_0;
+ 7'd2: serial_data <= #1 readback_1;
+ 7'd3: serial_data <= #1 readback_2;
+ 7'd4: serial_data <= #1 readback_3;
+ 7'd5: serial_data <= #1 readback_4;
+ 7'd6: serial_data <= #1 readback_5;
+ 7'd7: serial_data <= #1 readback_6;
+ 7'd8: serial_data <= #1 readback_7;
+ default: serial_data <= #1 32'd0;
+ endcase // case(serial_addr)
+ else if(ser_ctr >= 8)
+ serial_data <= #1 {serial_data[30:0],serial_data_in};
+ else if(ser_ctr < 8)
+ serial_addr <= #1 {serial_addr[5:0],serial_data_in};
+ end // else: !if(~enable)
+
+ reg enable_d1, enable_d2;
+ always @(posedge master_clk)
+ begin
+ enable_d1 <= #1 enable;
+ enable_d2 <= #1 enable_d1;
+ end
+
+ assign serial_strobe = enable_d2 & ~enable_d1;
+
+endmodule // serial_io
+
+
diff --git a/fpga/usrp1/sdr_lib/setting_reg.v b/fpga/usrp1/sdr_lib/setting_reg.v
new file mode 100644
index 000000000..3d31a9efb
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/setting_reg.v
@@ -0,0 +1,23 @@
+
+
+module setting_reg
+ ( input clock, input reset, input strobe, input wire [6:0] addr,
+ input wire [31:0] in, output reg [31:0] out, output reg changed);
+ parameter my_addr = 0;
+
+ always @(posedge clock)
+ if(reset)
+ begin
+ out <= #1 32'd0;
+ changed <= #1 1'b0;
+ end
+ else
+ if(strobe & (my_addr==addr))
+ begin
+ out <= #1 in;
+ changed <= #1 1'b1;
+ end
+ else
+ changed <= #1 1'b0;
+
+endmodule // setting_reg
diff --git a/fpga/usrp1/sdr_lib/setting_reg_masked.v b/fpga/usrp1/sdr_lib/setting_reg_masked.v
new file mode 100644
index 000000000..72f7e21eb
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/setting_reg_masked.v
@@ -0,0 +1,26 @@
+
+
+module setting_reg_masked
+ ( input clock, input reset, input strobe, input wire [6:0] addr,
+ input wire [31:0] in, output reg [31:0] out, output reg changed);
+/* upper 16 bits are mask, lower 16 bits are value
+ * Note that you get a 16 bit register, not a 32 bit one */
+
+ parameter my_addr = 0;
+
+ always @(posedge clock)
+ if(reset)
+ begin
+ out <= #1 32'd0;
+ changed <= #1 1'b0;
+ end
+ else
+ if(strobe & (my_addr==addr))
+ begin
+ out <= #1 (out & ~in[31:16]) | (in[15:0] & in[31:16] );
+ changed <= #1 1'b1;
+ end
+ else
+ changed <= #1 1'b0;
+
+endmodule // setting_reg_masked
diff --git a/fpga/usrp1/sdr_lib/sign_extend.v b/fpga/usrp1/sdr_lib/sign_extend.v
new file mode 100644
index 000000000..eae67faf2
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/sign_extend.v
@@ -0,0 +1,35 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+// Sign extension "macro"
+// bits_out should be greater than bits_in
+
+module sign_extend (in,out);
+ parameter bits_in=0; // FIXME Quartus insists on a default
+ parameter bits_out=0;
+
+ input [bits_in-1:0] in;
+ output [bits_out-1:0] out;
+
+ assign out = {{(bits_out-bits_in){in[bits_in-1]}},in};
+
+endmodule
diff --git a/fpga/usrp1/sdr_lib/strobe_gen.v b/fpga/usrp1/sdr_lib/strobe_gen.v
new file mode 100644
index 000000000..ba1a8ab28
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/strobe_gen.v
@@ -0,0 +1,46 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+
+
+module strobe_gen
+ ( input clock,
+ input reset,
+ input enable,
+ input [7:0] rate, // Rate should be 1 LESS THAN your desired divide ratio
+ input strobe_in,
+ output wire strobe );
+
+// parameter width = 8;
+
+ reg [7:0] counter;
+ assign strobe = ~|counter && enable && strobe_in;
+
+ always @(posedge clock)
+ if(reset | ~enable)
+ counter <= #1 8'd0;
+ else if(strobe_in)
+ if(counter == 0)
+ counter <= #1 rate;
+ else
+ counter <= #1 counter - 8'd1;
+
+endmodule // strobe_gen
diff --git a/fpga/usrp1/sdr_lib/tx_buffer.v b/fpga/usrp1/sdr_lib/tx_buffer.v
new file mode 100644
index 000000000..58642229d
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/tx_buffer.v
@@ -0,0 +1,170 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// Interface to Cypress FX2 bus
+// A packet is 512 Bytes. Each fifo line is 2 bytes
+// Fifo has 1024 or 2048 lines
+
+module tx_buffer
+ ( // USB Side
+ input usbclk,
+ input bus_reset, // Used here for the 257-Hack to fix the FX2 bug
+ input [15:0] usbdata,
+ input wire WR,
+ output reg have_space,
+ output reg tx_underrun,
+ input clear_status,
+
+ // DSP Side
+ input txclk,
+ input reset, // standard DSP-side reset
+ input wire [3:0] channels,
+ output reg [15:0] tx_i_0,
+ output reg [15:0] tx_q_0,
+ output reg [15:0] tx_i_1,
+ output reg [15:0] tx_q_1,
+ input txstrobe,
+ output wire tx_empty,
+ output [31:0] debugbus
+ );
+
+ wire [11:0] txfifolevel;
+ wire [15:0] fifodata;
+ wire rdreq;
+ reg [3:0] phase;
+ wire sop_f, iq_f;
+ reg sop;
+
+ // USB Side of FIFO
+ reg [15:0] usbdata_reg;
+ reg wr_reg;
+ reg [8:0] write_count;
+
+ always @(posedge usbclk)
+ have_space <= (txfifolevel < (4092-256)); // be extra conservative
+
+ always @(posedge usbclk)
+ begin
+ wr_reg <= WR;
+ usbdata_reg <= usbdata;
+ end
+
+ always @(posedge usbclk)
+ if(bus_reset)
+ write_count <= 0;
+ else if(wr_reg)
+ write_count <= write_count + 1;
+ else
+ write_count <= 0;
+
+ always @(posedge usbclk)
+ sop <= WR & ~wr_reg; // Edge detect
+
+ // FIFO
+ fifo_4k_18 txfifo
+ ( // USB Write Side
+ .data ( {sop,write_count[0],usbdata_reg} ),
+ .wrreq ( wr_reg & ~write_count[8] ),
+ .wrclk ( usbclk ),
+ .wrfull ( ),
+ .wrempty ( ),
+ .wrusedw ( txfifolevel ),
+ // DSP Read Side
+ .q ( {sop_f, iq_f, fifodata} ),
+ .rdreq ( rdreq ),
+ .rdclk ( txclk ),
+ .rdfull ( ),
+ .rdempty ( tx_empty ),
+ .rdusedw ( ),
+ // Async, shared
+ .aclr ( reset ) );
+
+ // DAC Side of FIFO
+ always @(posedge txclk)
+ if(reset)
+ begin
+ {tx_i_0,tx_q_0,tx_i_1,tx_q_1} <= 64'h0;
+ phase <= 4'd0;
+ end
+ else if(phase == channels)
+ begin
+ if(txstrobe)
+ phase <= 4'd0;
+ end
+ else
+ if(~tx_empty)
+ begin
+ case(phase)
+ 4'd0 : tx_i_0 <= fifodata;
+ 4'd1 : tx_q_0 <= fifodata;
+ 4'd2 : tx_i_1 <= fifodata;
+ 4'd3 : tx_q_1 <= fifodata;
+ endcase // case(phase)
+ phase <= phase + 4'd1;
+ end
+
+ assign rdreq = ((phase != channels) & ~tx_empty);
+
+ // Detect Underruns, cross clock domains
+ reg clear_status_dsp, tx_underrun_dsp;
+ always @(posedge txclk)
+ clear_status_dsp <= clear_status;
+
+ always @(posedge usbclk)
+ tx_underrun <= tx_underrun_dsp;
+
+ always @(posedge txclk)
+ if(reset)
+ tx_underrun_dsp <= 1'b0;
+ else if(txstrobe & (phase != channels))
+ tx_underrun_dsp <= 1'b1;
+ else if(clear_status_dsp)
+ tx_underrun_dsp <= 1'b0;
+
+ // TX debug bus
+ //
+ // 15:0 txclk domain => TXA [15:0]
+ // 31:16 usbclk domain => RXA [15:0]
+
+ assign debugbus[0] = reset;
+ assign debugbus[1] = txstrobe;
+ assign debugbus[2] = rdreq;
+ assign debugbus[6:3] = phase;
+ assign debugbus[7] = tx_empty;
+ assign debugbus[8] = tx_underrun_dsp;
+ assign debugbus[9] = iq_f;
+ assign debugbus[10] = sop_f;
+ assign debugbus[14:11] = 0;
+ assign debugbus[15] = txclk;
+
+ assign debugbus[16] = bus_reset;
+ assign debugbus[17] = WR;
+ assign debugbus[18] = wr_reg;
+ assign debugbus[19] = have_space;
+ assign debugbus[20] = write_count[8];
+ assign debugbus[21] = write_count[0];
+ assign debugbus[22] = sop;
+ assign debugbus[23] = tx_underrun;
+ assign debugbus[30:24] = 0;
+ assign debugbus[31] = usbclk;
+
+endmodule // tx_buffer
+
diff --git a/fpga/usrp1/sdr_lib/tx_chain.v b/fpga/usrp1/sdr_lib/tx_chain.v
new file mode 100644
index 000000000..60f868475
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/tx_chain.v
@@ -0,0 +1,65 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module tx_chain
+ (input clock,
+ input reset,
+ input enable,
+ input wire [7:0] interp_rate,
+ input sample_strobe,
+ input interpolator_strobe,
+ input wire [31:0] freq,
+ input wire [15:0] i_in,
+ input wire [15:0] q_in,
+ output wire [15:0] i_out,
+ output wire [15:0] q_out
+ );
+
+ wire [15:0] bb_i, bb_q;
+
+ cic_interp cic_interp_i
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(interp_rate),.strobe_in(interpolator_strobe),.strobe_out(sample_strobe),
+ .signal_in(i_in),.signal_out(bb_i) );
+
+ cic_interp cic_interp_q
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(interp_rate),.strobe_in(interpolator_strobe),.strobe_out(sample_strobe),
+ .signal_in(q_in),.signal_out(bb_q) );
+
+`define NOCORDIC_TX
+`ifdef NOCORDIC_TX
+ assign i_out = bb_i;
+ assign q_out = bb_q;
+`else
+ wire [31:0] phase;
+
+ phase_acc phase_acc_tx
+ (.clk(clock),.reset(reset),.enable(enable),
+ .strobe(sample_strobe),.freq(freq),.phase(phase) );
+
+ cordic tx_cordic_0
+ ( .clock(clock),.reset(reset),.enable(sample_strobe),
+ .xi(bb_i),.yi(bb_q),.zi(phase[31:16]),
+ .xo(i_out),.yo(q_out),.zo() );
+`endif
+
+endmodule // tx_chain
diff --git a/fpga/usrp1/sdr_lib/tx_chain_hb.v b/fpga/usrp1/sdr_lib/tx_chain_hb.v
new file mode 100644
index 000000000..5594348b4
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/tx_chain_hb.v
@@ -0,0 +1,76 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module tx_chain_hb
+ (input clock,
+ input reset,
+ input enable,
+ input wire [7:0] interp_rate,
+ input sample_strobe,
+ input interpolator_strobe,
+ input hb_strobe,
+ input wire [31:0] freq,
+ input wire [15:0] i_in,
+ input wire [15:0] q_in,
+ output wire [15:0] i_out,
+ output wire [15:0] q_out,
+output wire [15:0] debug, output [15:0] hb_i_out
+ );
+assign debug[15:13] = {sample_strobe,hb_strobe,interpolator_strobe};
+
+ wire [15:0] bb_i, bb_q;
+ wire [15:0] hb_i_out, hb_q_out;
+
+ halfband_interp hb
+ (.clock(clock),.reset(reset),.enable(enable),
+ .strobe_in(interpolator_strobe),.strobe_out(hb_strobe),
+ .signal_in_i(i_in),.signal_in_q(q_in),
+ .signal_out_i(hb_i_out),.signal_out_q(hb_q_out),
+ .debug(debug[12:0]));
+
+ cic_interp cic_interp_i
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(interp_rate),.strobe_in(hb_strobe),.strobe_out(sample_strobe),
+ .signal_in(hb_i_out),.signal_out(bb_i) );
+
+ cic_interp cic_interp_q
+ ( .clock(clock),.reset(reset),.enable(enable),
+ .rate(interp_rate),.strobe_in(hb_strobe),.strobe_out(sample_strobe),
+ .signal_in(hb_q_out),.signal_out(bb_q) );
+
+`define NOCORDIC_TX
+`ifdef NOCORDIC_TX
+ assign i_out = bb_i;
+ assign q_out = bb_q;
+`else
+ wire [31:0] phase;
+
+ phase_acc phase_acc_tx
+ (.clk(clock),.reset(reset),.enable(enable),
+ .strobe(sample_strobe),.freq(freq),.phase(phase) );
+
+ cordic tx_cordic_0
+ ( .clock(clock),.reset(reset),.enable(sample_strobe),
+ .xi(bb_i),.yi(bb_q),.zi(phase[31:16]),
+ .xo(i_out),.yo(q_out),.zo() );
+`endif
+
+endmodule // tx_chain