1 files changed, 65 insertions, 0 deletions
diff --git a/fpga/usrp1/sdr_lib/tx_chain.v b/fpga/usrp1/sdr_lib/tx_chain.v
new file mode 100644
index 000000000..60f868475
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/tx_chain.v
@@ -0,0 +1,65 @@
+// -*- verilog -*-
+//
+//  USRP - Universal Software Radio Peripheral
+//
+//  Copyright (C) 2003 Matt Ettus
+//
+//  This program is free software; you can redistribute it and/or modify
+//  it under the terms of the GNU General Public License as published by
+//  the Free Software Foundation; either version 2 of the License, or
+//  (at your option) any later version.
+//
+//  This program is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//  GNU General Public License for more details.
+//
+//  You should have received a copy of the GNU General Public License
+//  along with this program; if not, write to the Free Software
+//  Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+//
+
+module tx_chain
+  (input clock,
+   input reset,
+   input enable,
+   input wire [7:0] interp_rate,
+   input sample_strobe,
+   input interpolator_strobe,
+   input wire [31:0] freq,
+   input wire [15:0] i_in,
+   input wire [15:0] q_in,
+   output wire [15:0] i_out,
+   output wire [15:0] q_out
+   );
+
+   wire [15:0] bb_i, bb_q;
+
+   cic_interp cic_interp_i
+     ( .clock(clock),.reset(reset),.enable(enable),
+       .rate(interp_rate),.strobe_in(interpolator_strobe),.strobe_out(sample_strobe),
+       .signal_in(i_in),.signal_out(bb_i) );
+
+   cic_interp cic_interp_q
+     ( .clock(clock),.reset(reset),.enable(enable),
+       .rate(interp_rate),.strobe_in(interpolator_strobe),.strobe_out(sample_strobe),
+       .signal_in(q_in),.signal_out(bb_q) );
+   
+`define NOCORDIC_TX
+`ifdef NOCORDIC_TX
+   assign      i_out = bb_i;
+   assign      q_out = bb_q;
+`else
+   wire [31:0] phase;
+
+   phase_acc phase_acc_tx
+     (.clk(clock),.reset(reset),.enable(enable),
+      .strobe(sample_strobe),.freq(freq),.phase(phase) );
+   
+   cordic tx_cordic_0
+     ( .clock(clock),.reset(reset),.enable(sample_strobe), 
+       .xi(bb_i),.yi(bb_q),.zi(phase[31:16]),
+       .xo(i_out),.yo(q_out),.zo() );
+`endif
+
+endmodule // tx_chain