1 files changed, 73 insertions, 0 deletions
diff --git a/fpga/usrp1/sdr_lib/master_control_multi.v b/fpga/usrp1/sdr_lib/master_control_multi.v
new file mode 100644
index 000000000..cab96a79f
--- /dev/null
+++ b/fpga/usrp1/sdr_lib/master_control_multi.v
@@ -0,0 +1,73 @@
+// -*- verilog -*-
+//
+//  USRP - Universal Software Radio Peripheral
+//
+//  Copyright (C) 2006 Martin Dudok van Heel
+//
+//  This program is free software; you can redistribute it and/or modify
+//  it under the terms of the GNU General Public License as published by
+//  the Free Software Foundation; either version 2 of the License, or
+//  (at your option) any later version.
+//
+//  This program is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//  GNU General Public License for more details.
+//
+//  You should have received a copy of the GNU General Public License
+//  along with this program; if not, write to the Free Software
+//  Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+//
+`include "config.vh"
+`include "../../../firmware/include/fpga_regs_common.v"
+`include "../../../firmware/include/fpga_regs_standard.v"
+// Clock, enable, and reset controls for whole system
+// Modified version to enable multi_usrp synchronisation
+
+module master_control_multi
+  ( input master_clk, input usbclk,
+    input wire [6:0] serial_addr, input wire [31:0] serial_data, input wire serial_strobe,
+    input wire rx_slave_sync,
+    output tx_bus_reset, output rx_bus_reset,
+    output wire tx_dsp_reset, output wire rx_dsp_reset,
+    output wire enable_tx, output wire enable_rx,
+    output wire sync_rx,
+    output wire [7:0] interp_rate, output wire [7:0] decim_rate,
+    output tx_sample_strobe, output strobe_interp,
+    output rx_sample_strobe, output strobe_decim,
+    input tx_empty,
+    input wire [15:0] debug_0,input wire [15:0] debug_1,input wire [15:0] debug_2,input wire [15:0] debug_3,
+    output wire [15:0] reg_0, output wire [15:0] reg_1, output wire [15:0] reg_2, output wire [15:0] reg_3
+    );
+   
+   wire [15:0] reg_1_std;
+
+   master_control master_control_standard
+     ( .master_clk(master_clk),.usbclk(usbclk),
+       .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+       .tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset),
+       .tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset),
+       .enable_tx(enable_tx),.enable_rx(enable_rx),
+       .interp_rate(interp_rate),.decim_rate(decim_rate),
+       .tx_sample_strobe(tx_sample_strobe),.strobe_interp(strobe_interp),
+       .rx_sample_strobe(rx_sample_strobe),.strobe_decim(strobe_decim),
+       .tx_empty(tx_empty),
+       .debug_0(debug_0),.debug_1(debug_1),
+       .debug_2(debug_2),.debug_3(debug_3),
+       .reg_0(reg_0),.reg_1(reg_1_std),.reg_2(reg_2),.reg_3(reg_3) );
+
+   // FIXME need a separate reset for all control settings 
+   // Master/slave Controls assignments
+   wire [7:0] rx_master_slave_controls;
+   setting_reg_masked #(`FR_RX_MASTER_SLAVE) sr_rx_mstr_slv_ctrl(.clock(master_clk),.reset(1'b0),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(rx_master_slave_controls));
+ 
+   assign     sync_rx = rx_master_slave_controls[`bitnoFR_RX_SYNC] | (rx_master_slave_controls[`bitnoFR_RX_SYNC_SLAVE] & rx_slave_sync);
+  //sync if we are told by master_control or if we get a hardware slave sync
+  //TODO There can be a one sample difference between master and slave sync. 
+  //     Maybe use a register for sync_rx which uses the (neg or pos) edge of master_clock and/or rx_slave_sync to trigger
+  //     Or even use a seperate sync_rx_out and sync_rx_internal (which lags behind)
+  //TODO make output pin not hardwired
+assign reg_1 ={(rx_master_slave_controls[`bitnoFR_RX_SYNC_MASTER])? sync_rx:reg_1_std[15],reg_1_std[14:0]};
+
+   
+endmodule // master_control