summaryrefslogtreecommitdiffstats
path: root/fpga/usrp1/inband_lib
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp1/inband_lib')
-rwxr-xr-xfpga/usrp1/inband_lib/chan_fifo_reader.v219
-rw-r--r--fpga/usrp1/inband_lib/channel_demux.v78
-rwxr-xr-xfpga/usrp1/inband_lib/channel_ram.v107
-rwxr-xr-xfpga/usrp1/inband_lib/cmd_reader.v305
-rwxr-xr-xfpga/usrp1/inband_lib/packet_builder.v152
-rwxr-xr-xfpga/usrp1/inband_lib/register_io.v82
-rwxr-xr-xfpga/usrp1/inband_lib/rx_buffer_inband.v209
-rwxr-xr-xfpga/usrp1/inband_lib/tx_buffer_inband.v143
-rw-r--r--fpga/usrp1/inband_lib/tx_packer.v119
-rwxr-xr-xfpga/usrp1/inband_lib/usb_packet_fifo.v112
10 files changed, 1526 insertions, 0 deletions
diff --git a/fpga/usrp1/inband_lib/chan_fifo_reader.v b/fpga/usrp1/inband_lib/chan_fifo_reader.v
new file mode 100755
index 000000000..69da9ec5a
--- /dev/null
+++ b/fpga/usrp1/inband_lib/chan_fifo_reader.v
@@ -0,0 +1,219 @@
+module chan_fifo_reader
+ (reset, tx_clock, tx_strobe, timestamp_clock, samples_format,
+ fifodata, pkt_waiting, rdreq, skip, tx_q, tx_i,
+ underrun, tx_empty, debug, rssi, threshhold, rssi_wait) ;
+
+ input wire reset ;
+ input wire tx_clock ;
+ input wire tx_strobe ; //signal to output tx_i and tx_q
+ input wire [31:0] timestamp_clock ; //current time
+ input wire [3:0] samples_format ;// not useful at this point
+ input wire [31:0] fifodata ; //the data input
+ input wire pkt_waiting ; //signal the next packet is ready
+ output reg rdreq ; //actually an ack to the current fifodata
+ output reg skip ; //finish reading current packet
+ output reg [15:0] tx_q ; //top 16 bit output of fifodata
+ output reg [15:0] tx_i ; //bottom 16 bit output of fifodata
+ output reg underrun ;
+ output reg tx_empty ; //cause 0 to be the output
+ input wire [31:0] rssi;
+ input wire [31:0] threshhold;
+ input wire [31:0] rssi_wait;
+
+ output wire [14:0] debug;
+ assign debug = {7'd0, rdreq, skip, reader_state, pkt_waiting, tx_strobe, tx_clock};
+
+ //Samples format
+ // 16 bits interleaved complex samples
+ `define QI16 4'b0
+
+ // States
+ parameter IDLE = 3'd0;
+ parameter HEADER = 3'd1;
+ parameter TIMESTAMP = 3'd2;
+ parameter WAIT = 3'd3;
+ parameter WAITSTROBE = 3'd4;
+ parameter SEND = 3'd5;
+
+ // Header format
+ `define PAYLOAD 8:2
+ `define ENDOFBURST 27
+ `define STARTOFBURST 28
+ `define RSSI_FLAG 26
+
+
+ /* State registers */
+ reg [2:0] reader_state;
+ /* Local registers */
+ reg [6:0] payload_len;
+ reg [6:0] read_len;
+ reg [31:0] timestamp;
+ reg burst;
+ reg trash;
+ reg rssi_flag;
+ reg [31:0] time_wait;
+
+ always @(posedge tx_clock)
+ begin
+ if (reset)
+ begin
+ reader_state <= IDLE;
+ rdreq <= 0;
+ skip <= 0;
+ underrun <= 0;
+ burst <= 0;
+ tx_empty <= 1;
+ tx_q <= 0;
+ tx_i <= 0;
+ trash <= 0;
+ rssi_flag <= 0;
+ time_wait <= 0;
+ end
+ else
+ begin
+ case (reader_state)
+ IDLE:
+ begin
+ /*
+ * reset all the variables and wait for a tx_strobe
+ * it is assumed that the ram connected to this fifo_reader
+ * is a short hand fifo meaning that the header to the next packet
+ * is already available to this fifo_reader when pkt_waiting is on
+ */
+ skip <=0;
+ time_wait <= 0;
+ if (pkt_waiting == 1)
+ begin
+ reader_state <= HEADER;
+ rdreq <= 1;
+ underrun <= 0;
+ end
+ if (burst == 1 && pkt_waiting == 0)
+ underrun <= 1;
+ if (tx_strobe == 1)
+ tx_empty <= 1 ;
+ end
+
+ /* Process header */
+ HEADER:
+ begin
+ if (tx_strobe == 1)
+ tx_empty <= 1 ;
+
+ rssi_flag <= fifodata[`RSSI_FLAG]&fifodata[`STARTOFBURST];
+ //Check Start/End burst flag
+ if (fifodata[`STARTOFBURST] == 1
+ && fifodata[`ENDOFBURST] == 1)
+ burst <= 0;
+ else if (fifodata[`STARTOFBURST] == 1)
+ burst <= 1;
+ else if (fifodata[`ENDOFBURST] == 1)
+ burst <= 0;
+
+ if (trash == 1 && fifodata[`STARTOFBURST] == 0)
+ begin
+ skip <= 1;
+ reader_state <= IDLE;
+ rdreq <= 0;
+ end
+ else
+ begin
+ payload_len <= fifodata[`PAYLOAD] ;
+ read_len <= 0;
+ rdreq <= 1;
+ reader_state <= TIMESTAMP;
+ end
+ end
+
+ TIMESTAMP:
+ begin
+ timestamp <= fifodata;
+ reader_state <= WAIT;
+ if (tx_strobe == 1)
+ tx_empty <= 1 ;
+ rdreq <= 0;
+ end
+
+ // Decide if we wait, send or discard samples
+ WAIT:
+ begin
+ if (tx_strobe == 1)
+ tx_empty <= 1 ;
+
+ time_wait <= time_wait + 32'd1;
+ // Outdated
+ if ((timestamp < timestamp_clock) ||
+ (time_wait >= rssi_wait && rssi_wait != 0 && rssi_flag))
+ begin
+ trash <= 1;
+ reader_state <= IDLE;
+ skip <= 1;
+ end
+ // Let's send it
+ else if (timestamp == timestamp_clock
+ || timestamp == 32'hFFFFFFFF)
+ begin
+ if (rssi <= threshhold || rssi_flag == 0)
+ begin
+ trash <= 0;
+ reader_state <= WAITSTROBE;
+ end
+ else
+ reader_state <= WAIT;
+ end
+ else
+ reader_state <= WAIT;
+ end
+
+ // Wait for the transmit chain to be ready
+ WAITSTROBE:
+ begin
+ // If end of payload...
+ if (read_len == payload_len)
+ begin
+ reader_state <= IDLE;
+ skip <= 1;
+ if (tx_strobe == 1)
+ tx_empty <= 1 ;
+ end
+ else if (tx_strobe == 1)
+ begin
+ reader_state <= SEND;
+ rdreq <= 1;
+ end
+ end
+
+ // Send the samples to the tx_chain
+ SEND:
+ begin
+ reader_state <= WAITSTROBE;
+ read_len <= read_len + 7'd1;
+ tx_empty <= 0;
+ rdreq <= 0;
+
+ case(samples_format)
+ `QI16:
+ begin
+ tx_i <= fifodata[15:0];
+ tx_q <= fifodata[31:16];
+ end
+
+ // Assume 16 bits complex samples by default
+ default:
+ begin
+ tx_i <= fifodata[15:0];
+ tx_q <= fifodata[31:16];
+ end
+ endcase
+ end
+
+ default:
+ begin
+ //error handling
+ reader_state <= IDLE;
+ end
+ endcase
+ end
+ end
+
+endmodule
diff --git a/fpga/usrp1/inband_lib/channel_demux.v b/fpga/usrp1/inband_lib/channel_demux.v
new file mode 100644
index 000000000..cca5cdb65
--- /dev/null
+++ b/fpga/usrp1/inband_lib/channel_demux.v
@@ -0,0 +1,78 @@
+module channel_demux
+ #(parameter NUM_CHAN = 2) ( //usb Side
+ input [31:0]usbdata_final,
+ input WR_final,
+ // TX Side
+ input reset,
+ input txclk,
+ output reg [NUM_CHAN:0] WR_channel,
+ output reg [31:0] ram_data,
+ output reg [NUM_CHAN:0] WR_done_channel );
+ /* Parse header and forward to ram */
+
+ reg [2:0]reader_state;
+ reg [4:0]channel ;
+ reg [6:0]read_length ;
+
+ // States
+ parameter IDLE = 3'd0;
+ parameter HEADER = 3'd1;
+ parameter WAIT = 3'd2;
+ parameter FORWARD = 3'd3;
+
+ `define CHANNEL 20:16
+ `define PKT_SIZE 127
+ wire [4:0] true_channel;
+ assign true_channel = (usbdata_final[`CHANNEL] == 5'h1f) ?
+ NUM_CHAN : (usbdata_final[`CHANNEL]);
+
+ always @(posedge txclk)
+ begin
+ if (reset)
+ begin
+ reader_state <= IDLE;
+ WR_channel <= 0;
+ WR_done_channel <= 0;
+ end
+ else
+ case (reader_state)
+ IDLE: begin
+ if (WR_final)
+ reader_state <= HEADER;
+ end
+
+ // Store channel and forware header
+ HEADER: begin
+ channel <= true_channel;
+ WR_channel[true_channel] <= 1;
+ ram_data <= usbdata_final;
+ read_length <= 7'd0 ;
+
+ reader_state <= WAIT;
+ end
+
+ WAIT: begin
+ WR_channel[channel] <= 0;
+
+ if (read_length == `PKT_SIZE)
+ reader_state <= IDLE;
+ else if (WR_final)
+ reader_state <= FORWARD;
+ end
+
+ FORWARD: begin
+ WR_channel[channel] <= 1;
+ ram_data <= usbdata_final;
+ read_length <= read_length + 7'd1;
+
+ reader_state <= WAIT;
+ end
+
+ default:
+ begin
+ //error handling
+ reader_state <= IDLE;
+ end
+ endcase
+ end
+endmodule
diff --git a/fpga/usrp1/inband_lib/channel_ram.v b/fpga/usrp1/inband_lib/channel_ram.v
new file mode 100755
index 000000000..9621246c5
--- /dev/null
+++ b/fpga/usrp1/inband_lib/channel_ram.v
@@ -0,0 +1,107 @@
+module channel_ram
+ ( // System
+ input txclk, input reset,
+ // USB side
+ input [31:0] datain, input WR, input WR_done, output have_space,
+ // Reader side
+ output [31:0] dataout, input RD, input RD_done, output packet_waiting);
+
+ reg [6:0] wr_addr, rd_addr;
+ reg [1:0] which_ram_wr, which_ram_rd;
+ reg [2:0] nb_packets;
+
+ reg [31:0] ram0 [0:127];
+ reg [31:0] ram1 [0:127];
+ reg [31:0] ram2 [0:127];
+ reg [31:0] ram3 [0:127];
+
+ reg [31:0] dataout0;
+ reg [31:0] dataout1;
+ reg [31:0] dataout2;
+ reg [31:0] dataout3;
+
+ wire wr_done_int;
+ wire rd_done_int;
+ wire [6:0] rd_addr_final;
+ wire [1:0] which_ram_rd_final;
+
+ // USB side
+ always @(posedge txclk)
+ if(WR & (which_ram_wr == 2'd0)) ram0[wr_addr] <= datain;
+
+ always @(posedge txclk)
+ if(WR & (which_ram_wr == 2'd1)) ram1[wr_addr] <= datain;
+
+ always @(posedge txclk)
+ if(WR & (which_ram_wr == 2'd2)) ram2[wr_addr] <= datain;
+
+ always @(posedge txclk)
+ if(WR & (which_ram_wr == 2'd3)) ram3[wr_addr] <= datain;
+
+ assign wr_done_int = ((WR && (wr_addr == 7'd127)) || WR_done);
+
+ always @(posedge txclk)
+ if(reset)
+ wr_addr <= 0;
+ else if (WR_done)
+ wr_addr <= 0;
+ else if (WR)
+ wr_addr <= wr_addr + 7'd1;
+
+ always @(posedge txclk)
+ if(reset)
+ which_ram_wr <= 0;
+ else if (wr_done_int)
+ which_ram_wr <= which_ram_wr + 2'd1;
+
+ assign have_space = (nb_packets < 3'd3);
+
+ // Reader side
+ // short hand fifo
+ // rd_addr_final is what rd_addr is going to be next clock cycle
+ // which_ram_rd_final is what which_ram_rd is going to be next clock cycle
+ always @(posedge txclk) dataout0 <= ram0[rd_addr_final];
+ always @(posedge txclk) dataout1 <= ram1[rd_addr_final];
+ always @(posedge txclk) dataout2 <= ram2[rd_addr_final];
+ always @(posedge txclk) dataout3 <= ram3[rd_addr_final];
+
+ assign dataout = (which_ram_rd_final[1]) ?
+ (which_ram_rd_final[0] ? dataout3 : dataout2) :
+ (which_ram_rd_final[0] ? dataout1 : dataout0);
+
+ //RD_done is the only way to signal the end of one packet
+ assign rd_done_int = RD_done;
+
+ always @(posedge txclk)
+ if (reset)
+ rd_addr <= 0;
+ else if (RD_done)
+ rd_addr <= 0;
+ else if (RD)
+ rd_addr <= rd_addr + 7'd1;
+
+ assign rd_addr_final = (reset|RD_done) ? (6'd0) :
+ ((RD)?(rd_addr+7'd1):rd_addr);
+
+ always @(posedge txclk)
+ if (reset)
+ which_ram_rd <= 0;
+ else if (rd_done_int)
+ which_ram_rd <= which_ram_rd + 2'd1;
+
+ assign which_ram_rd_final = (reset) ? (2'd0):
+ ((rd_done_int) ? (which_ram_rd + 2'd1) : which_ram_rd);
+
+ //packet_waiting is set to zero if rd_done_int is high
+ //because there is no guarantee that nb_packets will be pos.
+
+ assign packet_waiting = (nb_packets > 1) | ((nb_packets == 1)&(~rd_done_int));
+ always @(posedge txclk)
+ if (reset)
+ nb_packets <= 0;
+ else if (wr_done_int & ~rd_done_int)
+ nb_packets <= nb_packets + 3'd1;
+ else if (rd_done_int & ~wr_done_int)
+ nb_packets <= nb_packets - 3'd1;
+
+endmodule
diff --git a/fpga/usrp1/inband_lib/cmd_reader.v b/fpga/usrp1/inband_lib/cmd_reader.v
new file mode 100755
index 000000000..b69ea02b7
--- /dev/null
+++ b/fpga/usrp1/inband_lib/cmd_reader.v
@@ -0,0 +1,305 @@
+module cmd_reader
+ (//System
+ input reset, input txclk, input [31:0] timestamp_clock,
+ //FX2 Side
+ output reg skip, output reg rdreq,
+ input [31:0] fifodata, input pkt_waiting,
+ //Rx side
+ input rx_WR_enabled, output reg [15:0] rx_databus,
+ output reg rx_WR, output reg rx_WR_done,
+ //register io
+ input wire [31:0] reg_data_out, output reg [31:0] reg_data_in,
+ output reg [6:0] reg_addr, output reg [1:0] reg_io_enable,
+ output wire [14:0] debug, output reg stop, output reg [15:0] stop_time);
+
+ // States
+ parameter IDLE = 4'd0;
+ parameter HEADER = 4'd1;
+ parameter TIMESTAMP = 4'd2;
+ parameter WAIT = 4'd3;
+ parameter TEST = 4'd4;
+ parameter SEND = 4'd5;
+ parameter PING = 4'd6;
+ parameter WRITE_REG = 4'd7;
+ parameter WRITE_REG_MASKED = 4'd8;
+ parameter READ_REG = 4'd9;
+ parameter DELAY = 4'd14;
+
+ `define OP_PING_FIXED 8'd0
+ `define OP_PING_FIXED_REPLY 8'd1
+ `define OP_WRITE_REG 8'd2
+ `define OP_WRITE_REG_MASKED 8'd3
+ `define OP_READ_REG 8'd4
+ `define OP_READ_REG_REPLY 8'd5
+ `define OP_DELAY 8'd12
+
+ reg [6:0] payload;
+ reg [6:0] payload_read;
+ reg [3:0] state;
+ reg [15:0] high;
+ reg [15:0] low;
+ reg pending;
+ reg [31:0] value0;
+ reg [31:0] value1;
+ reg [31:0] value2;
+ reg [1:0] lines_in;
+ reg [1:0] lines_out;
+ reg [1:0] lines_out_total;
+
+ `define JITTER 5
+ `define OP_CODE 31:24
+ `define PAYLOAD 8:2
+
+ wire [7:0] ops;
+ assign ops = value0[`OP_CODE];
+ assign debug = {state[3:0], lines_out[1:0], pending, rx_WR, rx_WR_enabled, value0[2:0], ops[2:0]};
+
+ always @(posedge txclk)
+ if (reset)
+ begin
+ pending <= 0;
+ state <= IDLE;
+ skip <= 0;
+ rdreq <= 0;
+ rx_WR <= 0;
+ reg_io_enable <= 0;
+ reg_data_in <= 0;
+ reg_addr <= 0;
+ stop <= 0;
+ end
+ else case (state)
+ IDLE :
+ begin
+ payload_read <= 0;
+ skip <= 0;
+ lines_in <= 0;
+ if(pkt_waiting)
+ begin
+ state <= HEADER;
+ rdreq <= 1;
+ end
+ end
+
+ HEADER :
+ begin
+ payload <= fifodata[`PAYLOAD];
+ state <= TIMESTAMP;
+ end
+
+ TIMESTAMP :
+ begin
+ value0 <= fifodata;
+ state <= WAIT;
+ rdreq <= 0;
+ end
+
+ WAIT :
+ begin
+ // Let's send it
+ if ((value0 <= timestamp_clock + `JITTER
+ && value0 > timestamp_clock)
+ || value0 == 32'hFFFFFFFF)
+ state <= TEST;
+ // Wait a little bit more
+ else if (value0 > timestamp_clock + `JITTER)
+ state <= WAIT;
+ // Outdated
+ else if (value0 < timestamp_clock)
+ begin
+ state <= IDLE;
+ skip <= 1;
+ end
+ end
+
+ TEST :
+ begin
+ reg_io_enable <= 0;
+ rx_WR <= 0;
+ rx_WR_done <= 1;
+ stop <= 0;
+ if (payload_read == payload)
+ begin
+ skip <= 1;
+ state <= IDLE;
+ rdreq <= 0;
+ end
+ else
+ begin
+ value0 <= fifodata;
+ lines_in <= 2'd1;
+ rdreq <= 1;
+ payload_read <= payload_read + 7'd1;
+ lines_out <= 0;
+ case (fifodata[`OP_CODE])
+ `OP_PING_FIXED:
+ begin
+ state <= PING;
+ end
+ `OP_WRITE_REG:
+ begin
+ state <= WRITE_REG;
+ pending <= 1;
+ end
+ `OP_WRITE_REG_MASKED:
+ begin
+ state <= WRITE_REG_MASKED;
+ pending <= 1;
+ end
+ `OP_READ_REG:
+ begin
+ state <= READ_REG;
+ end
+ `OP_DELAY:
+ begin
+ state <= DELAY;
+ end
+ default:
+ begin
+ //error, skip this packet
+ skip <= 1;
+ state <= IDLE;
+ end
+ endcase
+ end
+ end
+
+ SEND:
+ begin
+ rdreq <= 0;
+ rx_WR_done <= 0;
+ if (pending)
+ begin
+ rx_WR <= 1;
+ rx_databus <= high;
+ pending <= 0;
+ if (lines_out == lines_out_total)
+ state <= TEST;
+ else case (ops)
+ `OP_READ_REG:
+ begin
+ state <= READ_REG;
+ end
+ default:
+ begin
+ state <= TEST;
+ end
+ endcase
+ end
+ else
+ begin
+ if (rx_WR_enabled)
+ begin
+ rx_WR <= 1;
+ rx_databus <= low;
+ pending <= 1;
+ lines_out <= lines_out + 2'd1;
+ end
+ else
+ rx_WR <= 0;
+ end
+ end
+
+ PING:
+ begin
+ rx_WR <= 0;
+ rdreq <= 0;
+ rx_WR_done <= 0;
+ lines_out_total <= 2'd1;
+ pending <= 0;
+ state <= SEND;
+ high <= {`OP_PING_FIXED_REPLY, 8'd2};
+ low <= value0[15:0];
+ end
+
+ READ_REG:
+ begin
+ rx_WR <= 0;
+ rx_WR_done <= 0;
+ rdreq <= 0;
+ lines_out_total <= 2'd2;
+ pending <= 0;
+ state <= SEND;
+ if (lines_out == 0)
+ begin
+ high <= {`OP_READ_REG_REPLY, 8'd6};
+ low <= value0[15:0];
+ reg_io_enable <= 2'd3;
+ reg_addr <= value0[6:0];
+ end
+ else
+ begin
+ high <= reg_data_out[31:16];
+ low <= reg_data_out[15:0];
+ end
+ end
+
+ WRITE_REG:
+ begin
+ rx_WR <= 0;
+ if (pending)
+ pending <= 0;
+ else
+ begin
+ if (lines_in == 2'd1)
+ begin
+ payload_read <= payload_read + 7'd1;
+ lines_in <= lines_in + 2'd1;
+ value1 <= fifodata;
+ rdreq <= 0;
+ end
+ else
+ begin
+ reg_io_enable <= 2'd2;
+ reg_data_in <= value1;
+ reg_addr <= value0[6:0];
+ state <= TEST;
+ end
+ end
+ end
+
+ WRITE_REG_MASKED:
+ begin
+ rx_WR <= 0;
+ if (pending)
+ pending <= 0;
+ else
+ begin
+ if (lines_in == 2'd1)
+ begin
+ rdreq <= 1;
+ payload_read <= payload_read + 7'd1;
+ lines_in <= lines_in + 2'd1;
+ value1 <= fifodata;
+ end
+ else if (lines_in == 2'd2)
+ begin
+ rdreq <= 0;
+ payload_read <= payload_read + 7'd1;
+ lines_in <= lines_in + 2'd1;
+ value2 <= fifodata;
+ end
+ else
+ begin
+ reg_io_enable <= 2'd2;
+ reg_data_in <= (value1 & value2);
+ reg_addr <= value0[6:0];
+ state <= TEST;
+ end
+ end
+ end
+
+ DELAY :
+ begin
+ rdreq <= 0;
+ stop <= 1;
+ stop_time <= value0[15:0];
+ state <= TEST;
+ end
+
+ default :
+ begin
+ //error state handling
+ state <= IDLE;
+ end
+ endcase
+endmodule
diff --git a/fpga/usrp1/inband_lib/packet_builder.v b/fpga/usrp1/inband_lib/packet_builder.v
new file mode 100755
index 000000000..2c9122394
--- /dev/null
+++ b/fpga/usrp1/inband_lib/packet_builder.v
@@ -0,0 +1,152 @@
+module packet_builder #(parameter NUM_CHAN = 2)(
+ // System
+ input rxclk,
+ input reset,
+ input [31:0] timestamp_clock,
+ input [3:0] channels,
+ // ADC side
+ input [15:0]chan_fifodata,
+ input [NUM_CHAN:0]chan_empty,
+ input [9:0]chan_usedw,
+ output reg [3:0]rd_select,
+ output reg chan_rdreq,
+ // FX2 side
+ output reg WR,
+ output reg [15:0]fifodata,
+ input have_space,
+ input wire [31:0]rssi_0, input wire [31:0]rssi_1, input wire [31:0]rssi_2,
+ input wire [31:0]rssi_3, output wire [7:0] debugbus,
+ input [NUM_CHAN:0] underrun);
+
+
+ // States
+ `define IDLE 3'd0
+ `define HEADER1 3'd1
+ `define HEADER2 3'd2
+ `define TIMESTAMP 3'd3
+ `define FORWARD 3'd4
+
+ `define MAXPAYLOAD 504
+
+ `define PAYLOAD_LEN 8:0
+ `define TAG 12:9
+ `define MBZ 15:13
+
+ `define CHAN 4:0
+ `define RSSI 10:5
+ `define BURST 12:11
+ `define DROPPED 13
+ `define UNDERRUN 14
+ `define OVERRUN 15
+
+ reg [NUM_CHAN:0] overrun;
+ reg [2:0] state;
+ reg [8:0] read_length;
+ reg [8:0] payload_len;
+ reg timestamp_complete;
+ reg [3:0] check_next;
+
+ wire [31:0] true_rssi;
+ wire [4:0] true_channel;
+ wire ready_to_send;
+
+ assign debugbus = {chan_empty[0], rd_select[0], have_space,
+ (chan_usedw >= 10'd504), (chan_usedw ==0),
+ ready_to_send, state[1:0]};
+
+ assign true_rssi = (rd_select[1]) ? ((rd_select[0]) ? rssi_3:rssi_2) :
+ ((rd_select[0]) ? rssi_1:rssi_0);
+ assign true_channel = (check_next == 4'd0 ? 5'h1f : {1'd0, check_next - 4'd1});
+ assign ready_to_send = (chan_usedw >= 10'd504) || (chan_usedw == 0) ||
+ ((rd_select == NUM_CHAN)&&(chan_usedw > 0));
+
+ always @(posedge rxclk)
+ begin
+ if (reset)
+ begin
+ overrun <= 0;
+ WR <= 0;
+ rd_select <= 0;
+ chan_rdreq <= 0;
+ timestamp_complete <= 0;
+ check_next <= 0;
+ state <= `IDLE;
+ end
+ else case (state)
+ `IDLE: begin
+ chan_rdreq <= #1 0;
+ //check if the channel is full
+ if(~chan_empty[check_next])
+ begin
+ if (have_space)
+ begin
+ //transmit if the usb buffer have space
+ //check if we should send
+ if (ready_to_send)
+ state <= #1 `HEADER1;
+
+ overrun[check_next] <= 0;
+ end
+ else
+ begin
+ state <= #1 `IDLE;
+ overrun[check_next] <= 1;
+ end
+ rd_select <= #1 check_next;
+ end
+ check_next <= #1 (check_next == channels ? 4'd0 : check_next + 4'd1);
+ end
+
+ `HEADER1: begin
+ fifodata[`PAYLOAD_LEN] <= #1 9'd504;
+ payload_len <= #1 9'd504;
+ fifodata[`TAG] <= #1 0;
+ fifodata[`MBZ] <= #1 0;
+ WR <= #1 1;
+
+ state <= #1 `HEADER2;
+ read_length <= #1 0;
+ end
+
+ `HEADER2: begin
+ fifodata[`CHAN] <= #1 true_channel;
+ fifodata[`RSSI] <= #1 true_rssi[5:0];
+ fifodata[`BURST] <= #1 0;
+ fifodata[`DROPPED] <= #1 0;
+ fifodata[`UNDERRUN] <= #1 (check_next == 0) ? 1'b0 : underrun[true_channel];
+ fifodata[`OVERRUN] <= #1 (check_next == 0) ? 1'b0 : overrun[true_channel];
+ state <= #1 `TIMESTAMP;
+ end
+
+ `TIMESTAMP: begin
+ fifodata <= #1 (timestamp_complete ? timestamp_clock[31:16] : timestamp_clock[15:0]);
+ timestamp_complete <= #1 ~timestamp_complete;
+
+ if (~timestamp_complete)
+ chan_rdreq <= #1 1;
+
+ state <= #1 (timestamp_complete ? `FORWARD : `TIMESTAMP);
+ end
+
+ `FORWARD: begin
+ read_length <= #1 read_length + 9'd2;
+ fifodata <= #1 (read_length >= payload_len ? 16'hDEAD : chan_fifodata);
+
+ if (read_length >= `MAXPAYLOAD)
+ begin
+ WR <= #1 0;
+ state <= #1 `IDLE;
+ chan_rdreq <= #1 0;
+ end
+ else if (read_length == payload_len - 4)
+ chan_rdreq <= #1 0;
+ end
+
+ default: begin
+ //handling error state
+ state <= `IDLE;
+ end
+ endcase
+ end
+endmodule
+
diff --git a/fpga/usrp1/inband_lib/register_io.v b/fpga/usrp1/inband_lib/register_io.v
new file mode 100755
index 000000000..2b0cd1732
--- /dev/null
+++ b/fpga/usrp1/inband_lib/register_io.v
@@ -0,0 +1,82 @@
+module register_io
+ (clk, reset, enable, addr, datain, dataout, debugbus, addr_wr, data_wr, strobe_wr,
+ rssi_0, rssi_1, rssi_2, rssi_3, threshhold, rssi_wait, reg_0, reg_1, reg_2, reg_3,
+ debug_en, misc, txmux);
+
+ input clk;
+ input reset;
+ input wire [1:0] enable;
+ input wire [6:0] addr;
+ input wire [31:0] datain;
+ output reg [31:0] dataout;
+ output wire [15:0] debugbus;
+ output reg [6:0] addr_wr;
+ output reg [31:0] data_wr;
+ output wire strobe_wr;
+ input wire [31:0] rssi_0;
+ input wire [31:0] rssi_1;
+ input wire [31:0] rssi_2;
+ input wire [31:0] rssi_3;
+ output wire [31:0] threshhold;
+ output wire [31:0] rssi_wait;
+ input wire [15:0] reg_0;
+ input wire [15:0] reg_1;
+ input wire [15:0] reg_2;
+ input wire [15:0] reg_3;
+ input wire [3:0] debug_en;
+ input wire [7:0] misc;
+ input wire [31:0] txmux;
+
+ reg strobe;
+ wire [31:0] out[2:1];
+ assign debugbus = {clk, enable, addr[2:0], datain[4:0], dataout[4:0]};
+ assign threshhold = out[1];
+ assign rssi_wait = out[2];
+ assign strobe_wr = strobe;
+
+ always @(*)
+ if (reset | ~enable[1])
+ begin
+ strobe <= 0;
+ dataout <= 0;
+ end
+ else
+ begin
+ if (enable[0])
+ begin
+ //read
+ if (addr <= 7'd52 && addr > 7'd50)
+ dataout <= out[addr-7'd50];
+ else
+ dataout <= 32'hFFFFFFFF;
+ strobe <= 0;
+ end
+ else
+ begin
+ //write
+ dataout <= dataout;
+ strobe <= 1;
+ data_wr <= datain;
+ addr_wr <= addr;
+ end
+ end
+
+//register declarations
+ /*setting_reg #(50) setting_reg0(.clock(clk),.reset(reset),
+ .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[0]));*/
+ setting_reg #(51) setting_reg1(.clock(clk),.reset(reset),
+ .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[1]));
+ setting_reg #(52) setting_reg2(.clock(clk),.reset(reset),
+ .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[2]));
+ /*setting_reg #(53) setting_reg3(.clock(clk),.reset(reset),
+ .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[3]));
+ setting_reg #(54) setting_reg4(.clock(clk),.reset(reset),
+ .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[4]));
+ setting_reg #(55) setting_reg5(.clock(clk),.reset(reset),
+ .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[5]));
+ setting_reg #(56) setting_reg6(.clock(clk),.reset(reset),
+ .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[6]));
+ setting_reg #(57) setting_reg7(.clock(clk),.reset(reset),
+ .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[7]));*/
+
+endmodule
diff --git a/fpga/usrp1/inband_lib/rx_buffer_inband.v b/fpga/usrp1/inband_lib/rx_buffer_inband.v
new file mode 100755
index 000000000..cbd2d8958
--- /dev/null
+++ b/fpga/usrp1/inband_lib/rx_buffer_inband.v
@@ -0,0 +1,209 @@
+//`include "../../firmware/include/fpga_regs_common.v"
+//`include "../../firmware/include/fpga_regs_standard.v"
+module rx_buffer_inband
+ ( input usbclk,
+ input bus_reset,
+ input reset, // DSP side reset (used here), do not reset registers
+ input reset_regs, //Only reset registers
+ output [15:0] usbdata,
+ input RD,
+ output wire have_pkt_rdy,
+ output reg rx_overrun,
+ input wire [3:0] channels,
+ input wire [15:0] ch_0,
+ input wire [15:0] ch_1,
+ input wire [15:0] ch_2,
+ input wire [15:0] ch_3,
+ input wire [15:0] ch_4,
+ input wire [15:0] ch_5,
+ input wire [15:0] ch_6,
+ input wire [15:0] ch_7,
+ input rxclk,
+ input rxstrobe,
+ input clear_status,
+ input [6:0] serial_addr,
+ input [31:0] serial_data,
+ input serial_strobe,
+ output wire [15:0] debugbus,
+
+ //Connection with tx_inband
+ input rx_WR,
+ input [15:0] rx_databus,
+ input rx_WR_done,
+ output reg rx_WR_enabled,
+ //signal strength
+ input wire [31:0] rssi_0, input wire [31:0] rssi_1,
+ input wire [31:0] rssi_2, input wire [31:0] rssi_3,
+ input wire [1:0] tx_underrun
+ );
+
+ parameter NUM_CHAN = 1;
+ genvar i ;
+
+ // FX2 Bug Fix
+ reg [8:0] read_count;
+ always @(negedge usbclk)
+ if(bus_reset)
+ read_count <= #1 9'd0;
+ else if(RD & ~read_count[8])
+ read_count <= #1 read_count + 9'd1;
+ else
+ read_count <= #1 RD ? read_count : 9'b0;
+
+ // Time counter
+ reg [31:0] timestamp_clock;
+ always @(posedge rxclk)
+ if (reset)
+ timestamp_clock <= 0;
+ else
+ timestamp_clock <= timestamp_clock + 1;
+
+ // USB side fifo
+ wire [11:0] rdusedw;
+ wire [11:0] wrusedw;
+ wire [15:0] fifodata;
+ wire [15:0] fifodata_il[0:NUM_CHAN];
+ wire WR;
+ wire have_space;
+ reg sel;
+ reg wr;
+
+ always@(posedge rxclk)
+ begin
+ if(reset)
+ begin
+ sel<=1;
+ wr<=0;
+ end
+ else if(rxstrobe)
+ begin
+ sel<=0;
+ wr<=1;
+ end
+ else if(wr&~sel)
+ sel<=1;
+ else if(wr&sel)
+ wr<=0;
+ else
+ wr<=0;
+ end
+
+ assign fifodata_il[0] = (sel)?ch_1:ch_0;
+ assign fifodata_il[1] = (sel)?ch_3:ch_2;
+
+ fifo_4kx16_dc rx_usb_fifo (
+ .aclr ( reset ),
+ .data ( fifodata ),
+ .rdclk ( ~usbclk ),
+ .rdreq ( RD & ~read_count[8] ),
+ .wrclk ( rxclk ),
+ .wrreq ( WR ),
+ .q ( usbdata ),
+ .rdempty ( ),
+ .rdusedw ( rdusedw ),
+ .wrfull ( ),
+ .wrusedw ( wrusedw ) );
+
+ assign have_pkt_rdy = (rdusedw >= 12'd256);
+ assign have_space = (wrusedw < 12'd760);
+
+ // Rx side fifos
+ // These are of size [NUM_CHAN:0] because the extra channel is used for the
+ // RX command channel. If there were no command channel, they would be
+ // NUM_CHAN-1.
+ wire chan_rdreq;
+ wire [15:0] chan_fifodata;
+ wire [9:0] chan_usedw;
+ wire [NUM_CHAN:0] chan_empty;
+ wire [3:0] rd_select;
+ wire [NUM_CHAN:0] rx_full;
+
+ packet_builder #(NUM_CHAN) rx_pkt_builer (
+ .rxclk ( rxclk ),
+ .reset ( reset ),
+ .timestamp_clock ( timestamp_clock ),
+ .channels ( NUM_CHAN ),
+ .chan_rdreq ( chan_rdreq ),
+ .chan_fifodata ( chan_fifodata ),
+ .chan_empty ( chan_empty ),
+ .rd_select ( rd_select ),
+ .chan_usedw ( chan_usedw ),
+ .WR ( WR ),
+ .fifodata ( fifodata ),
+ .have_space ( have_space ),
+ .rssi_0(rssi_0), .rssi_1(rssi_1),
+ .rssi_2(rssi_2),.rssi_3(rssi_3), .debugbus(debug),
+ .underrun(tx_underrun));
+
+ // Detect overrun
+ always @(posedge rxclk)
+ if(reset)
+ rx_overrun <= 1'b0;
+ else if(rx_full[0])
+ rx_overrun <= 1'b1;
+ else if(clear_status)
+ rx_overrun <= 1'b0;
+
+
+ // FIXME: what is the purpose of these two lines?
+ wire [15:0]ch[NUM_CHAN:0];
+ assign ch[0] = ch_0;
+
+ wire cmd_empty;
+
+ always @(posedge rxclk)
+ if(reset)
+ rx_WR_enabled <= 1;
+ else if(cmd_empty)
+ rx_WR_enabled <= 1;
+ else if(rx_WR_done)
+ rx_WR_enabled <= 0;
+
+
+ // Of Size 0:NUM_CHAN due to extra command channel.
+ wire [15:0] dataout [0:NUM_CHAN];
+ wire [9:0] usedw [0:NUM_CHAN];
+ wire empty[0:NUM_CHAN];
+
+ generate for (i = 0 ; i < NUM_CHAN; i = i + 1)
+ begin : generate_channel_fifos
+
+ wire rdreq;
+
+ assign rdreq = (rd_select == i) & chan_rdreq;
+
+ fifo_1kx16 rx_chan_fifo (
+ .aclr ( reset ),
+ .clock ( rxclk ),
+ .data ( fifodata_il[i] ),
+ .rdreq ( rdreq ),
+ .wrreq ( ~rx_full[i] & wr),
+ .empty (empty[i]),
+ .full (rx_full[i]),
+ .q ( dataout[i]),
+ .usedw ( usedw[i]),
+ .almost_empty(chan_empty[i])
+ );
+ end
+ endgenerate
+
+ wire [7:0] debug;
+
+ fifo_1kx16 rx_cmd_fifo (
+ .aclr ( reset ),
+ .clock ( rxclk ),
+ .data ( rx_databus ),
+ .rdreq ( (rd_select == NUM_CHAN) & chan_rdreq ),
+ .wrreq ( rx_WR & rx_WR_enabled),
+ .empty ( cmd_empty),
+ .full ( rx_full[NUM_CHAN] ),
+ .q ( dataout[NUM_CHAN]),
+ .usedw ( usedw[NUM_CHAN] )
+ );
+
+ assign chan_empty[NUM_CHAN] = cmd_empty | rx_WR_enabled;
+ assign chan_fifodata = dataout[rd_select];
+ assign chan_usedw = usedw[rd_select];
+ assign debugbus = {4'd0, rxclk, rxstrobe, rx_full[0], rx_full[1], sel, wr};
+
+endmodule
diff --git a/fpga/usrp1/inband_lib/tx_buffer_inband.v b/fpga/usrp1/inband_lib/tx_buffer_inband.v
new file mode 100755
index 000000000..2dd75f42f
--- /dev/null
+++ b/fpga/usrp1/inband_lib/tx_buffer_inband.v
@@ -0,0 +1,143 @@
+module tx_buffer_inband
+ ( //System
+ input wire usbclk, input wire bus_reset, input wire reset,
+ input wire [15:0] usbdata, output wire have_space, input wire [3:0] channels,
+ //output transmit signals
+ output wire [15:0] tx_i_0, output wire [15:0] tx_q_0,
+ output wire [15:0] tx_i_1, output wire [15:0] tx_q_1,
+ output wire [15:0] tx_i_2, output wire [15:0] tx_q_2,
+ output wire [15:0] tx_i_3, output wire [15:0] tx_q_3,
+ input wire txclk, input wire txstrobe, input wire WR,
+ input wire clear_status, output wire tx_empty, output wire [15:0] debugbus,
+ //command reader io
+ output wire [15:0] rx_databus, output wire rx_WR, output wire rx_WR_done,
+ input wire rx_WR_enabled,
+ //register io
+ output wire [1:0] reg_io_enable, output wire [31:0] reg_data_in, output wire [6:0] reg_addr,
+ input wire [31:0] reg_data_out,
+ //input characteristic signals
+ input wire [31:0] rssi_0, input wire [31:0] rssi_1, input wire [31:0] rssi_2,
+ input wire [31:0] rssi_3, input wire [31:0] rssi_wait, input wire [31:0] threshhold,
+ output wire [1:0] tx_underrun,
+ //system stop
+ output wire stop, output wire [15:0] stop_time);
+
+ parameter NUM_CHAN = 1 ;
+
+ /* To generate channel readers */
+ genvar i ;
+
+ /* These will eventually be external register */
+ reg [31:0] timestamp_clock ;
+ wire [7:0] txstrobe_rate [NUM_CHAN-1:0] ;
+ wire [31:0] rssi [3:0];
+ assign rssi[0] = rssi_0;
+ assign rssi[1] = rssi_1;
+ assign rssi[2] = rssi_2;
+ assign rssi[3] = rssi_3;
+
+ always @(posedge txclk)
+ if (reset)
+ timestamp_clock <= 0;
+ else
+ timestamp_clock <= timestamp_clock + 1;
+
+
+ /* Connections between tx_usb_fifo_reader and
+ cnannel/command processing blocks */
+ wire [31:0] tx_data_bus ;
+ wire [NUM_CHAN:0] chan_WR ;
+ wire [NUM_CHAN:0] chan_done ;
+
+ /* Connections between data block and the
+ FX2/TX chains */
+ wire [NUM_CHAN:0] chan_underrun;
+ wire [NUM_CHAN:0] chan_txempty;
+
+ /* Conections between tx_data_packet_fifo and
+ its reader + strobe generator */
+ wire [31:0] chan_fifodata [NUM_CHAN:0] ;
+ wire chan_pkt_waiting [NUM_CHAN:0] ;
+ wire chan_rdreq [NUM_CHAN:0] ;
+ wire chan_skip [NUM_CHAN:0] ;
+ wire chan_have_space [NUM_CHAN:0] ;
+
+ wire [14:0] debug [NUM_CHAN:0];
+
+ /* Outputs to transmit chains */
+ wire [15:0] tx_i [NUM_CHAN:0] ;
+ wire [15:0] tx_q [NUM_CHAN:0] ;
+
+ assign tx_i[NUM_CHAN] = 0;
+ assign tx_q[NUM_CHAN] = 0;
+
+ assign have_space = chan_have_space[0] & chan_have_space[1];
+ assign tx_empty = chan_txempty[0] & chan_txempty[1] ;
+
+ assign tx_i_0 = chan_txempty[0] ? 16'b0 : tx_i[0] ;
+ assign tx_q_0 = chan_txempty[0] ? 16'b0 : tx_q[0] ;
+ assign tx_i_1 = chan_txempty[1] ? 16'b0 : tx_i[1] ;
+ assign tx_q_1 = chan_txempty[1] ? 16'b0 : tx_q[1] ;
+
+ assign tx_q_2 = 16'b0 ;
+ assign tx_i_2 = 16'b0 ;
+ assign tx_q_3 = 16'b0 ;
+ assign tx_i_3 = 16'b0 ;
+ assign tx_i_3 = 16'b0 ;
+
+ assign debugbus = {have_space, txclk, WR, WR_final, chan_WR, chan_done,
+ chan_pkt_waiting[0], chan_pkt_waiting[1],
+ chan_rdreq[0], chan_rdreq[1], chan_txempty[0], chan_txempty[1]};
+
+ wire [31:0] usbdata_final;
+ wire WR_final;
+
+ tx_packer tx_usb_packer
+ (.bus_reset(bus_reset), .usbclk(usbclk), .WR_fx2(WR),
+ .usbdata(usbdata), .reset(reset), .txclk(txclk),
+ .usbdata_final(usbdata_final), .WR_final(WR_final));
+
+ channel_demux #(NUM_CHAN) channel_demuxer
+ (.usbdata_final(usbdata_final), .WR_final(WR_final),
+ .reset(reset), .txclk(txclk), .WR_channel(chan_WR),
+ .WR_done_channel(chan_done), .ram_data(tx_data_bus));
+
+ generate for (i = 0 ; i < NUM_CHAN; i = i + 1)
+ begin : generate_channel_readers
+ assign tx_underrun[i] = chan_underrun[i];
+
+ channel_ram tx_data_packet_fifo
+ (.reset(reset), .txclk(txclk), .datain(tx_data_bus),
+ .WR(chan_WR[i]), .WR_done(chan_done[i]),
+ .have_space(chan_have_space[i]), .dataout(chan_fifodata[i]),
+ .packet_waiting(chan_pkt_waiting[i]), .RD(chan_rdreq[i]),
+ .RD_done(chan_skip[i]));
+
+ chan_fifo_reader tx_chan_reader
+ (.reset(reset), .tx_clock(txclk), .tx_strobe(txstrobe),
+ .timestamp_clock(timestamp_clock), .samples_format(4'b0),
+ .tx_q(tx_q[i]), .tx_i(tx_i[i]), .underrun(chan_underrun[i]),
+ .skip(chan_skip[i]), .rdreq(chan_rdreq[i]),
+ .fifodata(chan_fifodata[i]), .pkt_waiting(chan_pkt_waiting[i]),
+ .tx_empty(chan_txempty[i]), .rssi(rssi[i]), .debug(debug[i]),
+ .threshhold(threshhold), .rssi_wait(rssi_wait));
+ end
+ endgenerate
+
+
+ channel_ram tx_cmd_packet_fifo
+ (.reset(reset), .txclk(txclk), .datain(tx_data_bus), .WR(chan_WR[NUM_CHAN]),
+ .WR_done(chan_done[NUM_CHAN]), .have_space(chan_have_space[NUM_CHAN]),
+ .dataout(chan_fifodata[NUM_CHAN]), .packet_waiting(chan_pkt_waiting[NUM_CHAN]),
+ .RD(chan_rdreq[NUM_CHAN]), .RD_done(chan_skip[NUM_CHAN]));
+
+ cmd_reader tx_cmd_reader
+ (.reset(reset), .txclk(txclk), .timestamp_clock(timestamp_clock), .skip(chan_skip[NUM_CHAN]),
+ .rdreq(chan_rdreq[NUM_CHAN]), .fifodata(chan_fifodata[NUM_CHAN]),
+ .pkt_waiting(chan_pkt_waiting[NUM_CHAN]), .rx_databus(rx_databus),
+ .rx_WR(rx_WR), .rx_WR_done(rx_WR_done), .rx_WR_enabled(rx_WR_enabled),
+ .reg_data_in(reg_data_in), .reg_data_out(reg_data_out), .reg_addr(reg_addr),
+ .reg_io_enable(reg_io_enable), .debug(debug[NUM_CHAN]), .stop(stop), .stop_time(stop_time));
+
+endmodule // tx_buffer
+
diff --git a/fpga/usrp1/inband_lib/tx_packer.v b/fpga/usrp1/inband_lib/tx_packer.v
new file mode 100644
index 000000000..2f19b21f3
--- /dev/null
+++ b/fpga/usrp1/inband_lib/tx_packer.v
@@ -0,0 +1,119 @@
+module tx_packer
+ ( //FX2 Side
+ input bus_reset,
+ input usbclk,
+ input WR_fx2,
+ input [15:0]usbdata,
+
+ // TX Side
+ input reset,
+ input txclk,
+ output reg [31:0] usbdata_final,
+ output reg WR_final);
+
+ reg [8:0] write_count;
+
+ /* Fix FX2 bug */
+ always @(posedge usbclk)
+ begin
+ if(bus_reset) // Use bus reset because this is on usbclk
+ write_count <= #1 0;
+ else if(WR_fx2 & ~write_count[8])
+ write_count <= #1 write_count + 9'd1;
+ else
+ write_count <= #1 WR_fx2 ? write_count : 9'b0;
+ end
+
+ reg WR_fx2_fixed;
+ reg [15:0]usbdata_fixed;
+
+ always @(posedge usbclk)
+ begin
+ WR_fx2_fixed <= WR_fx2 & ~write_count[8];
+ usbdata_fixed <= usbdata;
+ end
+
+ /* Used to convert 16 bits bus_data to the 32 bits wide fifo */
+ reg word_complete ;
+ reg [15:0] usbdata_delayed ;
+ reg writing ;
+ wire [31:0] usbdata_packed ;
+ wire WR_packed ;
+
+ always @(posedge usbclk)
+ begin
+ if (bus_reset)
+ begin
+ word_complete <= 0 ;
+ writing <= 0 ;
+ end
+ else if (WR_fx2_fixed)
+ begin
+ writing <= 1 ;
+ if (word_complete)
+ word_complete <= 0 ;
+ else
+ begin
+ usbdata_delayed <= usbdata_fixed ;
+ word_complete <= 1 ;
+ end
+ end
+ else
+ writing <= 0 ;
+ end
+
+ assign usbdata_packed = {usbdata_fixed, usbdata_delayed} ;
+ assign WR_packed = word_complete & writing ;
+
+ /* Make sure data are sync with usbclk */
+ reg [31:0]usbdata_usbclk;
+ reg WR_usbclk;
+
+ always @(posedge usbclk)
+ begin
+ if (WR_packed)
+ usbdata_usbclk <= usbdata_packed;
+ WR_usbclk <= WR_packed;
+ end
+
+ /* Cross clock boundaries */
+ reg [31:0] usbdata_tx ;
+ reg WR_tx;
+ reg WR_1;
+ reg WR_2;
+
+ always @(posedge txclk) usbdata_tx <= usbdata_usbclk;
+
+ always @(posedge txclk)
+ if (reset)
+ WR_1 <= 0;
+ else
+ WR_1 <= WR_usbclk;
+
+ always @(posedge txclk)
+ if (reset)
+ WR_2 <= 0;
+ else
+ WR_2 <= WR_1;
+
+ always @(posedge txclk)
+ begin
+ if (reset)
+ WR_tx <= 0;
+ else
+ WR_tx <= WR_1 & ~WR_2;
+ end
+
+ always @(posedge txclk)
+ begin
+ if (reset)
+ WR_final <= 0;
+ else
+ begin
+ WR_final <= WR_tx;
+ if (WR_tx)
+ usbdata_final <= usbdata_tx;
+ end
+ end
+
+endmodule
diff --git a/fpga/usrp1/inband_lib/usb_packet_fifo.v b/fpga/usrp1/inband_lib/usb_packet_fifo.v
new file mode 100755
index 000000000..c416e2bdb
--- /dev/null
+++ b/fpga/usrp1/inband_lib/usb_packet_fifo.v
@@ -0,0 +1,112 @@
+module usb_packet_fifo
+ ( input reset,
+ input clock_in,
+ input clock_out,
+ input [15:0]ram_data_in,
+ input write_enable,
+ output reg [15:0]ram_data_out,
+ output reg pkt_waiting,
+ output reg have_space,
+ input read_enable,
+ input skip_packet ) ;
+
+ /* Some parameters for usage later on */
+ parameter DATA_WIDTH = 16 ;
+ parameter NUM_PACKETS = 4 ;
+
+ /* Create the RAM here */
+ reg [DATA_WIDTH-1:0] usb_ram [256*NUM_PACKETS-1:0] ;
+
+ /* Create the address signals */
+ reg [7-2+NUM_PACKETS:0] usb_ram_ain ;
+ reg [7:0] usb_ram_offset ;
+ reg [1:0] usb_ram_packet ;
+
+ wire [7-2+NUM_PACKETS:0] usb_ram_aout ;
+ reg isfull;
+
+ assign usb_ram_aout = {usb_ram_packet,usb_ram_offset} ;
+
+ // Check if there is one full packet to process
+ always @(usb_ram_ain, usb_ram_aout)
+ begin
+ if (reset)
+ pkt_waiting <= 0;
+ else if (usb_ram_ain == usb_ram_aout)
+ pkt_waiting <= isfull;
+ else if (usb_ram_ain > usb_ram_aout)
+ pkt_waiting <= (usb_ram_ain - usb_ram_aout) >= 256;
+ else
+ pkt_waiting <= (usb_ram_ain + 10'b1111111111 - usb_ram_aout) >= 256;
+ end
+
+ // Check if there is room
+ always @(usb_ram_ain, usb_ram_aout)
+ begin
+ if (reset)
+ have_space <= 1;
+ else if (usb_ram_ain == usb_ram_aout)
+ have_space <= ~isfull;
+ else if (usb_ram_ain > usb_ram_aout)
+ have_space <= (usb_ram_ain - usb_ram_aout) <= 256 * (NUM_PACKETS - 1);
+ else
+ have_space <= (usb_ram_aout - usb_ram_ain) >= 256;
+ end
+
+ /* RAM Write Address process */
+ always @(posedge clock_in)
+ begin
+ if( reset )
+ usb_ram_ain <= 0 ;
+ else
+ if( write_enable )
+ begin
+ usb_ram_ain <= usb_ram_ain + 1 ;
+ if (usb_ram_ain + 1 == usb_ram_aout)
+ isfull <= 1;
+ end
+ end
+
+ /* RAM Writing process */
+ always @(posedge clock_in)
+ begin
+ if( write_enable )
+ begin
+ usb_ram[usb_ram_ain] <= ram_data_in ;
+ end
+ end
+
+ /* RAM Read Address process */
+ always @(posedge clock_out)
+ begin
+ if( reset )
+ begin
+ usb_ram_packet <= 0 ;
+ usb_ram_offset <= 0 ;
+ isfull <= 0;
+ end
+ else
+ if( skip_packet )
+ begin
+ usb_ram_packet <= usb_ram_packet + 1 ;
+ usb_ram_offset <= 0 ;
+ end
+ else if(read_enable)
+ if( usb_ram_offset == 8'b11111111 )
+ begin
+ usb_ram_offset <= 0 ;
+ usb_ram_packet <= usb_ram_packet + 1 ;
+ end
+ else
+ usb_ram_offset <= usb_ram_offset + 1 ;
+ if (usb_ram_ain == usb_ram_aout)
+ isfull <= 0;
+ end
+
+ /* RAM Reading Process */
+ always @(posedge clock_out)
+ begin
+ ram_data_out <= usb_ram[usb_ram_aout] ;
+ end
+
+endmodule \ No newline at end of file
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 18:55:48 +0000