diff options
Diffstat (limited to 'fpga/usrp1/inband_lib/rx_buffer_inband.v')
| -rwxr-xr-x | fpga/usrp1/inband_lib/rx_buffer_inband.v | 209 |
1 files changed, 209 insertions, 0 deletions
diff --git a/fpga/usrp1/inband_lib/rx_buffer_inband.v b/fpga/usrp1/inband_lib/rx_buffer_inband.v new file mode 100755 index 000000000..40c7ec7bd --- /dev/null +++ b/fpga/usrp1/inband_lib/rx_buffer_inband.v @@ -0,0 +1,209 @@ +//`include "../common/fpga_regs_common.v"
+//`include "../common/fpga_regs_standard.v"
+module rx_buffer_inband
+ ( input usbclk,
+ input bus_reset,
+ input reset, // DSP side reset (used here), do not reset registers
+ input reset_regs, //Only reset registers
+ output [15:0] usbdata,
+ input RD,
+ output wire have_pkt_rdy,
+ output reg rx_overrun,
+ input wire [3:0] channels,
+ input wire [15:0] ch_0,
+ input wire [15:0] ch_1,
+ input wire [15:0] ch_2,
+ input wire [15:0] ch_3,
+ input wire [15:0] ch_4,
+ input wire [15:0] ch_5,
+ input wire [15:0] ch_6,
+ input wire [15:0] ch_7,
+ input rxclk,
+ input rxstrobe,
+ input clear_status,
+ input [6:0] serial_addr,
+ input [31:0] serial_data,
+ input serial_strobe,
+ output wire [15:0] debugbus,
+
+ //Connection with tx_inband
+ input rx_WR,
+ input [15:0] rx_databus,
+ input rx_WR_done,
+ output reg rx_WR_enabled,
+ //signal strength
+ input wire [31:0] rssi_0, input wire [31:0] rssi_1,
+ input wire [31:0] rssi_2, input wire [31:0] rssi_3,
+ input wire [1:0] tx_underrun
+ );
+
+ parameter NUM_CHAN = 1;
+ genvar i ;
+
+ // FX2 Bug Fix
+ reg [8:0] read_count;
+ always @(negedge usbclk)
+ if(bus_reset)
+ read_count <= #1 9'd0;
+ else if(RD & ~read_count[8])
+ read_count <= #1 read_count + 9'd1;
+ else
+ read_count <= #1 RD ? read_count : 9'b0;
+
+ // Time counter
+ reg [31:0] timestamp_clock;
+ always @(posedge rxclk)
+ if (reset)
+ timestamp_clock <= 0;
+ else
+ timestamp_clock <= timestamp_clock + 1;
+
+ // USB side fifo
+ wire [11:0] rdusedw;
+ wire [11:0] wrusedw;
+ wire [15:0] fifodata;
+ wire [15:0] fifodata_il[0:NUM_CHAN];
+ wire WR;
+ wire have_space;
+ reg sel;
+ reg wr;
+
+ always@(posedge rxclk)
+ begin
+ if(reset)
+ begin
+ sel<=1;
+ wr<=0;
+ end
+ else if(rxstrobe)
+ begin
+ sel<=0;
+ wr<=1;
+ end
+ else if(wr&~sel)
+ sel<=1;
+ else if(wr&sel)
+ wr<=0;
+ else
+ wr<=0;
+ end
+
+ assign fifodata_il[0] = (sel)?ch_1:ch_0;
+ assign fifodata_il[1] = (sel)?ch_3:ch_2;
+
+ fifo_4kx16_dc rx_usb_fifo (
+ .aclr ( reset ),
+ .data ( fifodata ),
+ .rdclk ( ~usbclk ),
+ .rdreq ( RD & ~read_count[8] ),
+ .wrclk ( rxclk ),
+ .wrreq ( WR ),
+ .q ( usbdata ),
+ .rdempty ( ),
+ .rdusedw ( rdusedw ),
+ .wrfull ( ),
+ .wrusedw ( wrusedw ) );
+
+ assign have_pkt_rdy = (rdusedw >= 12'd256);
+ assign have_space = (wrusedw < 12'd760);
+
+ // Rx side fifos
+ // These are of size [NUM_CHAN:0] because the extra channel is used for the
+ // RX command channel. If there were no command channel, they would be
+ // NUM_CHAN-1.
+ wire chan_rdreq;
+ wire [15:0] chan_fifodata;
+ wire [9:0] chan_usedw;
+ wire [NUM_CHAN:0] chan_empty;
+ wire [3:0] rd_select;
+ wire [NUM_CHAN:0] rx_full;
+
+ packet_builder #(NUM_CHAN) rx_pkt_builer (
+ .rxclk ( rxclk ),
+ .reset ( reset ),
+ .timestamp_clock ( timestamp_clock ),
+ .channels ( NUM_CHAN ),
+ .chan_rdreq ( chan_rdreq ),
+ .chan_fifodata ( chan_fifodata ),
+ .chan_empty ( chan_empty ),
+ .rd_select ( rd_select ),
+ .chan_usedw ( chan_usedw ),
+ .WR ( WR ),
+ .fifodata ( fifodata ),
+ .have_space ( have_space ),
+ .rssi_0(rssi_0), .rssi_1(rssi_1),
+ .rssi_2(rssi_2),.rssi_3(rssi_3), .debugbus(debug),
+ .underrun(tx_underrun));
+
+ // Detect overrun
+ always @(posedge rxclk)
+ if(reset)
+ rx_overrun <= 1'b0;
+ else if(rx_full[0])
+ rx_overrun <= 1'b1;
+ else if(clear_status)
+ rx_overrun <= 1'b0;
+
+
+ // FIXME: what is the purpose of these two lines?
+ wire [15:0]ch[NUM_CHAN:0];
+ assign ch[0] = ch_0;
+
+ wire cmd_empty;
+
+ always @(posedge rxclk)
+ if(reset)
+ rx_WR_enabled <= 1;
+ else if(cmd_empty)
+ rx_WR_enabled <= 1;
+ else if(rx_WR_done)
+ rx_WR_enabled <= 0;
+
+
+ // Of Size 0:NUM_CHAN due to extra command channel.
+ wire [15:0] dataout [0:NUM_CHAN];
+ wire [9:0] usedw [0:NUM_CHAN];
+ wire empty[0:NUM_CHAN];
+
+ generate for (i = 0 ; i < NUM_CHAN; i = i + 1)
+ begin : generate_channel_fifos
+
+ wire rdreq;
+
+ assign rdreq = (rd_select == i) & chan_rdreq;
+
+ fifo_1kx16 rx_chan_fifo (
+ .aclr ( reset ),
+ .clock ( rxclk ),
+ .data ( fifodata_il[i] ),
+ .rdreq ( rdreq ),
+ .wrreq ( ~rx_full[i] & wr),
+ .empty (empty[i]),
+ .full (rx_full[i]),
+ .q ( dataout[i]),
+ .usedw ( usedw[i]),
+ .almost_empty(chan_empty[i])
+ );
+ end
+ endgenerate
+
+ wire [7:0] debug;
+
+ fifo_1kx16 rx_cmd_fifo (
+ .aclr ( reset ),
+ .clock ( rxclk ),
+ .data ( rx_databus ),
+ .rdreq ( (rd_select == NUM_CHAN) & chan_rdreq ),
+ .wrreq ( rx_WR & rx_WR_enabled),
+ .empty ( cmd_empty),
+ .full ( rx_full[NUM_CHAN] ),
+ .q ( dataout[NUM_CHAN]),
+ .usedw ( usedw[NUM_CHAN] )
+ );
+
+ assign chan_empty[NUM_CHAN] = cmd_empty | rx_WR_enabled;
+ assign chan_fifodata = dataout[rd_select];
+ assign chan_usedw = usedw[rd_select];
+ assign debugbus = {4'd0, rxclk, rxstrobe, rx_full[0], rx_full[1], sel, wr};
+
+endmodule
|