diff options
Diffstat (limited to 'firmware')
| -rw-r--r-- | firmware/microblaze/lib/clocks.c | 23 | ||||
| -rw-r--r-- | firmware/microblaze/lib/clocks.h | 4 | ||||
| -rw-r--r-- | firmware/microblaze/lib/u2_init.c | 3 | ||||
| -rw-r--r-- | firmware/microblaze/usrp2/memory_map.h | 4 | ||||
| -rw-r--r-- | firmware/microblaze/usrp2p/ethernet.c | 4 | ||||
| -rw-r--r-- | firmware/microblaze/usrp2p/memory_map.h | 16 |
6 files changed, 34 insertions, 20 deletions
diff --git a/firmware/microblaze/lib/clocks.c b/firmware/microblaze/lib/clocks.c index b9bd2e107..2b352a385 100644 --- a/firmware/microblaze/lib/clocks.c +++ b/firmware/microblaze/lib/clocks.c @@ -25,7 +25,6 @@ #include "ad9510.h" #include "spi.h" #include "u2_init.h" -#include "nonstdio.h" //USRP2PLUS clocks: //Clock 0: testclk @@ -46,6 +45,7 @@ clocks_init(void) // Set up basic clocking functions in AD9510 ad9510_write_reg(0x45, 0x01); // CLK2 drives distribution + //enable the 100MHz clock output to the FPGA for 50MHz CPU clock clocks_enable_fpga_clk(true, 1); spi_wait(); @@ -58,7 +58,14 @@ clocks_init(void) // ad9510_write_reg(0x5A, 0x01); // Update Regs // Primary clock configuration - clocks_mimo_config(MC_WE_DONT_LOCK); +// clocks_mimo_config(MC_WE_DONT_LOCK); + + + //wait for the clock to stabilize + while(!clocks_lock_detect()); + + //issue a reset to the DCM so it locks up to the new freq + output_regs->clk_ctrl |= CLK_RESET; // Set up other clocks //clocks_enable_test_clk(false, 0); @@ -71,7 +78,7 @@ clocks_init(void) //clocks_enable_adc_clk(true, 1); } - +/* void clocks_mimo_config(int flags) { @@ -99,7 +106,7 @@ clocks_mimo_config(int flags) spi_wait(); // Allow for clock switchover - + // The below masks include 0x10, which issues a reset to the DCM. if (flags & _MC_WE_LOCK){ // WE LOCK if (flags & _MC_MIMO_CLK_INPUT) { // Turn on ref output and choose the MIMO connector @@ -121,16 +128,14 @@ clocks_mimo_config(int flags) // else // clocks_enable_clkexp_out(false,0); } +*/ -/* bool clocks_lock_detect() { - if(pic_regs->pending & PIC_CLKSTATUS) - return true; - return false; + return (pic_regs->pending & PIC_CLKSTATUS); } -*/ + int inline clocks_gen_div(int divisor) { diff --git a/firmware/microblaze/lib/clocks.h b/firmware/microblaze/lib/clocks.h index 399127595..28d1d542f 100644 --- a/firmware/microblaze/lib/clocks.h +++ b/firmware/microblaze/lib/clocks.h @@ -43,12 +43,12 @@ void clocks_init(void); * Configure our master clock source, and whether or not we drive a * clock onto the mimo connector. See MC_flags in usrp2_mimo_config.h. */ -void clocks_mimo_config(int flags); +//void clocks_mimo_config(int flags); /*! * \brief Lock Detect -- Return True if our PLL is locked */ -//bool clocks_lock_detect(); +bool clocks_lock_detect(); /*! * \brief Enable or disable test clock (extra clock signal) diff --git a/firmware/microblaze/lib/u2_init.c b/firmware/microblaze/lib/u2_init.c index ff558d673..75bc40859 100644 --- a/firmware/microblaze/lib/u2_init.c +++ b/firmware/microblaze/lib/u2_init.c @@ -26,6 +26,7 @@ #include "mdelay.h" #include "clocks.h" #include "usrp2/fw_common.h" +#include "nonstdio.h" unsigned char u2_hw_rev_major; unsigned char u2_hw_rev_minor; @@ -66,7 +67,7 @@ u2_init(void) mdelay(100); hal_set_leds(0x1f, 0x1f); mdelay(100); - hal_set_leds(0x1, 0x1f); // Leave the first one on + hal_set_leds(LED_D, 0x1f); // Leave one on #if 0 // test register readback diff --git a/firmware/microblaze/usrp2/memory_map.h b/firmware/microblaze/usrp2/memory_map.h index 4c9ead615..41a2820bc 100644 --- a/firmware/microblaze/usrp2/memory_map.h +++ b/firmware/microblaze/usrp2/memory_map.h @@ -375,6 +375,10 @@ typedef struct { volatile uint32_t led_src; // HW or SW control for LEDs } output_regs_t; +#define CLK_RESET (1<<4) +#define CLK_ENABLE (1<<3) | (1<<2) +#define CLK_SEL (1<<1) | (1<<0) + #define SERDES_ENABLE 8 #define SERDES_PRBSEN 4 #define SERDES_LOOPEN 2 diff --git a/firmware/microblaze/usrp2p/ethernet.c b/firmware/microblaze/usrp2p/ethernet.c index 80c303153..660f28934 100644 --- a/firmware/microblaze/usrp2p/ethernet.c +++ b/firmware/microblaze/usrp2p/ethernet.c @@ -70,7 +70,7 @@ ed_link_up(int speed) ed_set_mac_speed(speed); //turn on link LED for USRP2P - hal_set_leds((1 << 0), (1 << 0)); + hal_set_leds(LED_RJ45, LED_RJ45); if (ed_callback) // fire link changed callback @@ -83,7 +83,7 @@ ed_link_down(void) // putstr("ed_link_down\n"); //turn off link LED for USRP2P - hal_set_leds(0, (1 << 0)); + hal_set_leds(0, LED_RJ45); if (ed_callback) // fire link changed callback (*ed_callback)(0); diff --git a/firmware/microblaze/usrp2p/memory_map.h b/firmware/microblaze/usrp2p/memory_map.h index fc0094e67..9c5b576d7 100644 --- a/firmware/microblaze/usrp2p/memory_map.h +++ b/firmware/microblaze/usrp2p/memory_map.h @@ -402,6 +402,10 @@ typedef struct { volatile uint32_t led_src; // HW or SW control for LEDs } output_regs_t; +#define CLK_RESET (1<<4) +#define CLK_ENABLE (1<<3) | (1<<2) +#define CLK_SEL (1<<1) | (1<<0) + #define SERDES_ENABLE 8 #define SERDES_PRBSEN 4 #define SERDES_LOOPEN 2 @@ -412,13 +416,13 @@ typedef struct { // crazy order that matches the labels on the case -#define LED_A (1 << 4) -#define LED_B (1 << 1) -#define LED_C (1 << 3) -#define LED_D (1 << 0) -#define LED_E (1 << 2) +#define LED_A (1 << 2) +#define LED_B (1 << 5) +#define LED_E (1 << 3) +#define LED_D (1 << 1) +#define LED_C (1 << 4) // LED_F // controlled by CPLD -#define LED_RJ45 (1 << 5) +#define LED_RJ45 (1 << 0) #define output_regs ((output_regs_t *) MISC_OUTPUT_BASE) |