summaryrefslogtreecommitdiffstats
path: root/firmware
diff options
context:
space:
mode:
Diffstat (limited to 'firmware')
-rw-r--r--firmware/zpu/apps/txrx_uhd.c26
-rw-r--r--firmware/zpu/lib/net_common.c32
-rw-r--r--firmware/zpu/usrp2/memory_map.h134
-rw-r--r--firmware/zpu/usrp2p/memory_map.h134
4 files changed, 57 insertions, 269 deletions
diff --git a/firmware/zpu/apps/txrx_uhd.c b/firmware/zpu/apps/txrx_uhd.c
index 4ccb585e2..0c93d2352 100644
--- a/firmware/zpu/apps/txrx_uhd.c
+++ b/firmware/zpu/apps/txrx_uhd.c
@@ -53,20 +53,34 @@ static void setup_network(void);
// the fast-path setup global variables
// ----------------------------------------------------------------
static eth_mac_addr_t fp_mac_addr_src, fp_mac_addr_dst;
-extern struct socket_address fp_socket_src, fp_socket_dst;
+struct socket_address fp_socket_src, fp_socket_dst;
+extern uint16_t dsp0_dst_port, err0_dst_port, dsp1_dst_port;
static void handle_udp_err0_packet(
struct socket_address src, struct socket_address dst,
unsigned char *payload, int payload_len
){
sr_udp_sm->err0_port = (((uint32_t)dst.port) << 16) | src.port;
+ err0_dst_port = src.port;
printf("Storing for async error path:\n");
printf(" source udp port: %d\n", dst.port);
printf(" destination udp port: %d\n", src.port);
newline();
}
-static void handle_udp_data_packet(
+static void handle_udp_dsp1_packet(
+ struct socket_address src, struct socket_address dst,
+ unsigned char *payload, int payload_len
+){
+ sr_udp_sm->dsp1_port = (((uint32_t)dst.port) << 16) | src.port;
+ dsp1_dst_port = src.port;
+ printf("Storing for dsp1 path:\n");
+ printf(" source udp port: %d\n", dst.port);
+ printf(" destination udp port: %d\n", src.port);
+ newline();
+}
+
+static void handle_udp_dsp0_packet(
struct socket_address src, struct socket_address dst,
unsigned char *payload, int payload_len
){
@@ -75,7 +89,8 @@ static void handle_udp_data_packet(
fp_socket_src = dst;
fp_socket_dst = src;
sr_udp_sm->dsp0_port = (((uint32_t)dst.port) << 16) | src.port;
- printf("Storing for fast path:\n");
+ dsp0_dst_port = src.port;
+ printf("Storing for dsp0 path:\n");
printf(" source mac addr: ");
print_mac_addr(&fp_mac_addr_src); newline();
printf(" source ip addr: ");
@@ -341,13 +356,14 @@ main(void)
//1) register the addresses into the network stack
register_addrs(ethernet_mac_addr(), get_ip_addr());
- pkt_ctrl_program_inspector(get_ip_addr(), USRP2_UDP_DATA_PORT);
+ pkt_ctrl_program_inspector(get_ip_addr(), USRP2_UDP_DSP0_PORT);
//2) register callbacks for udp ports we service
init_udp_listeners();
register_udp_listener(USRP2_UDP_CTRL_PORT, handle_udp_ctrl_packet);
- register_udp_listener(USRP2_UDP_DATA_PORT, handle_udp_data_packet);
+ register_udp_listener(USRP2_UDP_DSP0_PORT, handle_udp_dsp0_packet);
register_udp_listener(USRP2_UDP_ERR0_PORT, handle_udp_err0_packet);
+ register_udp_listener(USRP2_UDP_DSP1_PORT, handle_udp_dsp1_packet);
#ifdef USRP2P
register_udp_listener(USRP2_UDP_UPDATE_PORT, handle_udp_fw_update_packet);
#endif
diff --git a/firmware/zpu/lib/net_common.c b/firmware/zpu/lib/net_common.c
index d1b06976d..6a0fd254b 100644
--- a/firmware/zpu/lib/net_common.c
+++ b/firmware/zpu/lib/net_common.c
@@ -1,6 +1,5 @@
-/* -*- c -*- */
/*
- * Copyright 2009,2010 Ettus Research LLC
+ * Copyright 2009-2011 Ettus Research LLC
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -42,7 +41,7 @@ static const bool debug = false;
static const eth_mac_addr_t BCAST_MAC_ADDR = {{0xff, 0xff, 0xff, 0xff, 0xff, 0xff}};
//used in the top level application...
-struct socket_address fp_socket_src, fp_socket_dst;
+uint16_t dsp0_dst_port, err0_dst_port, dsp1_dst_port;
// ------------------------------------------------------------------------
@@ -277,15 +276,24 @@ handle_icmp_packet(struct ip_addr src, struct ip_addr dst,
//filter out non udp data response
struct ip_hdr *ip = (struct ip_hdr *)(((uint8_t*)icmp) + sizeof(struct icmp_echo_hdr));
struct udp_hdr *udp = (struct udp_hdr *)(((char *)ip) + IP_HLEN);
- if (IPH_PROTO(ip) != IP_PROTO_UDP || udp->dest != fp_socket_dst.port) return;
-
- //end async update packets per second
- sr_tx_ctrl->cyc_per_up = 0;
-
- //the end continuous streaming command
- sr_rx_ctrl->cmd = 1 << 31; //no samples now
- sr_rx_ctrl->time_secs = 0;
- sr_rx_ctrl->time_ticks = 0; //latch the command
+ if (IPH_PROTO(ip) != IP_PROTO_UDP) break;
+
+ if (udp->dest == dsp0_dst_port){
+ //the end continuous streaming command
+ sr_rx_ctrl0->cmd = 1 << 31; //no samples now
+ sr_rx_ctrl0->time_secs = 0;
+ sr_rx_ctrl0->time_ticks = 0; //latch the command
+ }
+ else if (udp->dest == dsp1_dst_port){
+ //the end continuous streaming command
+ sr_rx_ctrl1->cmd = 1 << 31; //no samples now
+ sr_rx_ctrl1->time_secs = 0;
+ sr_rx_ctrl1->time_ticks = 0; //latch the command
+ }
+ else if (udp->dest == err0_dst_port){
+ //end async update packets per second
+ sr_tx_ctrl->cyc_per_up = 0;
+ }
//struct udp_hdr *udp = (struct udp_hdr *)((char *)icmp + 28);
//printf("icmp port unr %d\n", udp->dest);
diff --git a/firmware/zpu/usrp2/memory_map.h b/firmware/zpu/usrp2/memory_map.h
index e728a1ddb..79b11759a 100644
--- a/firmware/zpu/usrp2/memory_map.h
+++ b/firmware/zpu/usrp2/memory_map.h
@@ -1,4 +1,4 @@
-/* -*- c -*- */
+// Copyright 2010-2011 Ettus Research LLC
/*
* Copyright 2007,2008,2009 Free Software Foundation, Inc.
*
@@ -227,8 +227,10 @@ hwconfig_wishbone_divisor(void)
#define SR_UDP_SM 96
#define SR_TX_DSP 208
#define SR_TX_CTRL 224
-#define SR_RX_DSP 160
-#define SR_RX_CTRL 176
+#define SR_RX_DSP0 160
+#define SR_RX_DSP1 240
+#define SR_RX_CTRL0 176
+#define SR_RX_CTRL1 32
#define SR_TIME64 192
#define SR_SIMTIMER 198
#define SR_LAST 255
@@ -350,10 +352,7 @@ typedef struct {
#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM))
-// --- dsp tx regs ---
-
-#define MIN_CIC_INTERP 1
-#define MAX_CIC_INTERP 128
+// --- VITA TX CTRL regs ---
typedef struct {
volatile uint32_t num_chan;
@@ -366,52 +365,6 @@ typedef struct {
#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL))
-typedef struct {
- volatile int32_t freq;
- volatile uint32_t scale_iq; // {scale_i,scale_q}
- volatile uint32_t interp_rate;
- volatile uint32_t _padding0; // padding for the tx_mux
- // NOT freq, scale, interp
- /*!
- * \brief output mux configuration.
- *
- * <pre>
- * 3 2 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-------------------------------+-------+-------+-------+-------+
- * | | DAC1 | DAC0 |
- * +-------------------------------+-------+-------+-------+-------+
- *
- * There are N DUCs (1 now) with complex inputs and outputs.
- * There are two DACs.
- *
- * Each 4-bit DACx field specifies the source for the DAC
- * Each subfield is coded like this:
- *
- * 3 2 1 0
- * +-------+
- * | N |
- * +-------+
- *
- * N specifies which DUC output is connected to this DAC.
- *
- * N which interp output
- * --- -------------------
- * 0 DUC 0 I
- * 1 DUC 0 Q
- * 2 DUC 1 I
- * 3 DUC 1 Q
- * F All Zeros
- *
- * The default value is 0x10
- * </pre>
- */
- volatile uint32_t tx_mux;
-
-} dsp_tx_regs_t;
-
-#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP))
-
// --- VITA RX CTRL regs ---
typedef struct {
// The following 3 are logically a single command register.
@@ -419,81 +372,10 @@ typedef struct {
volatile uint32_t cmd; // {now, chain, num_samples(30)
volatile uint32_t time_secs;
volatile uint32_t time_ticks;
-
- volatile uint32_t clear_overrun; // write anything to clear overrun
- volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter
- volatile uint32_t vrt_stream_id; // word 1 of packet.
- volatile uint32_t vrt_trailer;
- volatile uint32_t nsamples_per_pkt;
- volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources
- volatile uint32_t pad[7]; // Make each structure 16 elements long
} sr_rx_ctrl_t;
-#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL))
-
-// --- dsp rx regs ---
-#define MIN_CIC_DECIM 1
-#define MAX_CIC_DECIM 128
-
-typedef struct {
- volatile int32_t freq;
- volatile uint32_t scale_iq; // {scale_i,scale_q}
- volatile uint32_t decim_rate;
- volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits,
- // otherwise it is automatic
- volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits
-
- /*!
- * \brief input mux configuration.
- *
- * This determines which ADC (or constant zero) is connected to
- * each DDC input. There are N DDCs (1 now). Each has two inputs.
- *
- * <pre>
- * Mux value:
- *
- * 3 2 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- * | |Q0 |I0 |
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- *
- * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
- * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
- *
- * The default value is 0x4
- * </pre>
- */
- volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v
-
- /*!
- * \brief Streaming GPIO configuration
- *
- * This determines whether the LSBs of I and Q samples come from the DSP
- * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first
- * set the GPIO data direction register to have io_rx[15] and/or io_rx[14]
- * configured as inputs. The GPIO pins will be sampled at the time the
- * remainder of the DSP sample is strobed into the RX sample FIFO. There
- * will be a decimation-dependent fixed time offset between the GPIO
- * sample stream and the associated RF samples.
- *
- * 3 2 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- * | MBZ |Q|I|
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- *
- * I 0=LSB comes from DSP pipeline (default)
- * 1=LSB comes from io_rx[15]
- *
- * Q 0=LSB comes from DSP pipeline (default)
- * 1=LSB comes from io_rx[14]
- */
- volatile uint32_t gpio_stream_enable;
-
-} dsp_rx_regs_t;
-
-#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP))
+#define sr_rx_ctrl0 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL0))
+#define sr_rx_ctrl1 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL1))
// ----------------------------------------------------------------
// VITA49 64 bit time (write only)
diff --git a/firmware/zpu/usrp2p/memory_map.h b/firmware/zpu/usrp2p/memory_map.h
index 36d8ac9f2..2567a4588 100644
--- a/firmware/zpu/usrp2p/memory_map.h
+++ b/firmware/zpu/usrp2p/memory_map.h
@@ -1,4 +1,4 @@
-/* -*- c -*- */
+// Copyright 2010-2011 Ettus Research LLC
/*
* Copyright 2007,2008,2009 Free Software Foundation, Inc.
*
@@ -218,8 +218,10 @@ hwconfig_wishbone_divisor(void)
#define SR_UDP_SM 96
#define SR_TX_DSP 208
#define SR_TX_CTRL 224
-#define SR_RX_DSP 160
-#define SR_RX_CTRL 176
+#define SR_RX_DSP0 160
+#define SR_RX_DSP1 240
+#define SR_RX_CTRL0 176
+#define SR_RX_CTRL1 32
#define SR_TIME64 192
#define SR_SIMTIMER 198
#define SR_LAST 255
@@ -343,10 +345,7 @@ typedef struct {
#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM))
-// --- dsp tx regs ---
-
-#define MIN_CIC_INTERP 1
-#define MAX_CIC_INTERP 128
+// --- VITA TX CTRL regs ---
typedef struct {
volatile uint32_t num_chan;
@@ -359,52 +358,6 @@ typedef struct {
#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL))
-typedef struct {
- volatile int32_t freq;
- volatile uint32_t scale_iq; // {scale_i,scale_q}
- volatile uint32_t interp_rate;
- volatile uint32_t _padding0; // padding for the tx_mux
- // NOT freq, scale, interp
- /*!
- * \brief output mux configuration.
- *
- * <pre>
- * 3 2 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-------------------------------+-------+-------+-------+-------+
- * | | DAC1 | DAC0 |
- * +-------------------------------+-------+-------+-------+-------+
- *
- * There are N DUCs (1 now) with complex inputs and outputs.
- * There are two DACs.
- *
- * Each 4-bit DACx field specifies the source for the DAC
- * Each subfield is coded like this:
- *
- * 3 2 1 0
- * +-------+
- * | N |
- * +-------+
- *
- * N specifies which DUC output is connected to this DAC.
- *
- * N which interp output
- * --- -------------------
- * 0 DUC 0 I
- * 1 DUC 0 Q
- * 2 DUC 1 I
- * 3 DUC 1 Q
- * F All Zeros
- *
- * The default value is 0x10
- * </pre>
- */
- volatile uint32_t tx_mux;
-
-} dsp_tx_regs_t;
-
-#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP))
-
// --- VITA RX CTRL regs ---
typedef struct {
// The following 3 are logically a single command register.
@@ -412,81 +365,10 @@ typedef struct {
volatile uint32_t cmd; // {now, chain, num_samples(30)
volatile uint32_t time_secs;
volatile uint32_t time_ticks;
-
- volatile uint32_t clear_overrun; // write anything to clear overrun
- volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter
- volatile uint32_t vrt_stream_id; // word 1 of packet.
- volatile uint32_t vrt_trailer;
- volatile uint32_t nsamples_per_pkt;
- volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources
- volatile uint32_t pad[7]; // Make each structure 16 elements long
} sr_rx_ctrl_t;
-#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL))
-
-// --- dsp rx regs ---
-#define MIN_CIC_DECIM 1
-#define MAX_CIC_DECIM 128
-
-typedef struct {
- volatile int32_t freq;
- volatile uint32_t scale_iq; // {scale_i,scale_q}
- volatile uint32_t decim_rate;
- volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits,
- // otherwise it is automatic
- volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits
-
- /*!
- * \brief input mux configuration.
- *
- * This determines which ADC (or constant zero) is connected to
- * each DDC input. There are N DDCs (1 now). Each has two inputs.
- *
- * <pre>
- * Mux value:
- *
- * 3 2 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- * | |Q0 |I0 |
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- *
- * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
- * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
- *
- * The default value is 0x4
- * </pre>
- */
- volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v
-
- /*!
- * \brief Streaming GPIO configuration
- *
- * This determines whether the LSBs of I and Q samples come from the DSP
- * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first
- * set the GPIO data direction register to have io_rx[15] and/or io_rx[14]
- * configured as inputs. The GPIO pins will be sampled at the time the
- * remainder of the DSP sample is strobed into the RX sample FIFO. There
- * will be a decimation-dependent fixed time offset between the GPIO
- * sample stream and the associated RF samples.
- *
- * 3 2 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- * | MBZ |Q|I|
- * +-------+-------+-------+-------+-------+-------+-------+-------+
- *
- * I 0=LSB comes from DSP pipeline (default)
- * 1=LSB comes from io_rx[15]
- *
- * Q 0=LSB comes from DSP pipeline (default)
- * 1=LSB comes from io_rx[14]
- */
- volatile uint32_t gpio_stream_enable;
-
-} dsp_rx_regs_t;
-
-#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP))
+#define sr_rx_ctrl0 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL0))
+#define sr_rx_ctrl1 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL1))
// ----------------------------------------------------------------
// VITA49 64 bit time (write only)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 12:45:07 +0000