diff options
Diffstat (limited to 'firmware')
57 files changed, 610 insertions, 3251 deletions
diff --git a/firmware/microblaze/.gitignore b/firmware/microblaze/.gitignore index e867fe87c..796b96d1c 100644 --- a/firmware/microblaze/.gitignore +++ b/firmware/microblaze/.gitignore @@ -1,46 +1 @@ -/*-stamp -/*.a -/*.bin -/*.dump -/*.log -/*.rom -/.deps -/*.guess -/*.sub -/Makefile -/Makefile.in -/aclocal.m4 -/autom4te.cache -/blink_leds -/blink_leds2 /build -/compile -/config.h -/config.h.in -/config.log -/config.status -/configure -/depcomp -/eth_test -/gen_eth_packets -/ibs_rx_test -/ibs_tx_test -/install-sh -/libtool -/ltmain.sh -/missing -/py-compile -/rcv_eth_packets -/run_tests.sh -/stamp-h1 -/test1 -/test_phy_comm -/timer_test -/buf_ram_test -/buf_ram_zero -/hello -/configure.lineno -/configure.guess -/configure.sub -*.deps -*.o diff --git a/firmware/microblaze/AUTHORS b/firmware/microblaze/AUTHORS index c365261f8..c230624fb 100644 --- a/firmware/microblaze/AUTHORS +++ b/firmware/microblaze/AUTHORS @@ -1,3 +1,4 @@ Eric Blossom <eb@comsec.com> Matt Ettus <matt@ettus.com> Josh Blum <josh@ettus.com> +Nick Foster <nick@ettus.com> diff --git a/firmware/microblaze/CMakeLists.txt b/firmware/microblaze/CMakeLists.txt new file mode 100644 index 000000000..6222cc2bf --- /dev/null +++ b/firmware/microblaze/CMakeLists.txt @@ -0,0 +1,118 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# setup project and compiler +######################################################################## +CMAKE_MINIMUM_REQUIRED(VERSION 2.6) +SET(CMAKE_C_COMPILER zpu-elf-gcc) +SET(CMAKE_C_COMPILER_WORKS TRUE) +SET(CMAKE_C_COMPILER_FORCED TRUE) +PROJECT(USRP_NXXX_FW C) + +######################################################################## +# lwIP header include dirs +######################################################################## +SET(LWIPDIR ${CMAKE_SOURCE_DIR}/lwip/lwip-1.3.1) + +INCLUDE_DIRECTORIES( + ${CMAKE_SOURCE_DIR}/lwip + ${CMAKE_SOURCE_DIR}/lwip_port + ${LWIPDIR}/src/include + ${LWIPDIR}/src/include/ipv4 +) + +######################################################################## +# misc flags for the gcc compiler +######################################################################## +SET(CMAKE_C_FLAGS -abel) #always needed compile time and link time +ADD_DEFINITIONS(-Os --std=gnu99 -Wall -Werror-implicit-function-declaration -ffunction-sections) + +MACRO(ADD_LINKER_FLAGS flags) + SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${flags}") +ENDMACRO(ADD_LINKER_FLAGS) + +ADD_LINKER_FLAGS("-Wl,--relax -Wl,--gc-sections") + +######################################################################## +# define for the hal io (FIXME move?) +######################################################################## +#ADD_DEFINITIONS(-DHAL_IO_USES_DBOARD_PINS) +ADD_DEFINITIONS(-DHAL_IO_USES_UART) + +######################################################################## +# common cflags and ldflags +######################################################################## +INCLUDE_DIRECTORIES( + ${CMAKE_SOURCE_DIR}/../../host/lib/usrp + ${CMAKE_SOURCE_DIR}/lib +) + +######################################################################## +# setup programs for output files +######################################################################## +FIND_PROGRAM(LINKER zpu-elf-ld) +FIND_PROGRAM(OBJCOPY zpu-elf-objcopy) +FIND_PROGRAM(OBJDUMP zpu-elf-objdump) +FIND_PROGRAM(HEXDUMP hexdump) + +######################################################################## +# helper functions to build output formats +######################################################################## +MACRO(GEN_OUTPUTS target) + GET_FILENAME_COMPONENT(name ${target} NAME_WE) + #command to create a map from elf + ADD_CUSTOM_COMMAND( + OUTPUT ${name}.map DEPENDS ${target} + COMMAND ${LINKER} + ARGS -Map ${name}.map ${target} + ) + #command to create a bin from elf + ADD_CUSTOM_COMMAND( + OUTPUT ${name}.bin DEPENDS ${target} + COMMAND ${OBJCOPY} + ARGS -O binary ${target} ${name}.bin + ) + #command to create a ihx from elf + ADD_CUSTOM_COMMAND( + OUTPUT ${name}.ihx DEPENDS ${target} + COMMAND ${OBJCOPY} + ARGS -O ihex ${target} ${name}.ihx + ) + #command to create a dump from elf + ADD_CUSTOM_COMMAND( + OUTPUT ${name}.dump DEPENDS ${target} + COMMAND ${OBJDUMP} + ARGS -DSC ${target} > ${name}.dump + ) + #command to create a rom from bin + ADD_CUSTOM_COMMAND( + OUTPUT ${name}.rom DEPENDS ${name}.bin + COMMAND ${HEXDUMP} + ARGS -v -e'1/1 \"%.2X\\n\"' ${name}.bin > ${name}.rom + ) + #add a top level target for output files + ADD_CUSTOM_TARGET( + ${name}_outputs ALL DEPENDS ${name}.map ${name}.bin ${name}.ihx ${name}.dump ${name}.rom + ) +ENDMACRO(GEN_OUTPUTS) + +######################################################################## +# Add the subdirectories +######################################################################## +ADD_SUBDIRECTORY(usrp2) +ADD_SUBDIRECTORY(usrp2p) diff --git a/firmware/microblaze/COPYING b/firmware/microblaze/COPYING deleted file mode 100644 index 94a9ed024..000000000 --- a/firmware/microblaze/COPYING +++ /dev/null @@ -1,674 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - <program> Copyright (C) <year> <name of author> - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -<http://www.gnu.org/licenses/>. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -<http://www.gnu.org/philosophy/why-not-lgpl.html>. diff --git a/firmware/microblaze/ChangeLog b/firmware/microblaze/ChangeLog deleted file mode 100644 index 8b1378917..000000000 --- a/firmware/microblaze/ChangeLog +++ /dev/null @@ -1 +0,0 @@ - diff --git a/firmware/microblaze/INSTALL b/firmware/microblaze/INSTALL deleted file mode 100644 index 5458714e1..000000000 --- a/firmware/microblaze/INSTALL +++ /dev/null @@ -1,234 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006 Free Software Foundation, Inc. - -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. - -Basic Installation -================== - -Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - -You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - -Installation Names -================== - -By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - -Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: - - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - -`configure' recognizes the following options to control how it operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff --git a/firmware/microblaze/Makefile.am b/firmware/microblaze/Makefile.am deleted file mode 100644 index 52fa649c2..000000000 --- a/firmware/microblaze/Makefile.am +++ /dev/null @@ -1,29 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007,2008 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -include $(top_srcdir)/Makefile.common - -EXTRA_DIST = \ - u2_flash_tool - -SUBDIRS = \ - usrp2 \ - usrp2p \ - usrp2p/bootloader - diff --git a/firmware/microblaze/Makefile.common b/firmware/microblaze/Makefile.common deleted file mode 100644 index 4e726edab..000000000 --- a/firmware/microblaze/Makefile.common +++ /dev/null @@ -1,88 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -include $(top_srcdir)/lib/Makefile.inc - -######################################################################## -# lwIP header include dirs -######################################################################## -LWIPDIR = $(top_srcdir)/lwip/lwip-1.3.1 - -LWIP_INCLUDES = \ - -I$(top_srcdir)/lwip \ - -I$(top_srcdir)/lwip_port \ - -I$(LWIPDIR)/src/include \ - -I$(LWIPDIR)/src/include/ipv4 - -######################################################################## -# misc flags for the mb-gcc compiler -######################################################################## -MBGCC_CFLAGS = \ - --std=gnu99 -Wall -Werror-implicit-function-declaration \ - -mxl-soft-div -msoft-float -mxl-soft-mul -mxl-barrel-shift - -######################################################################## -# define for the hal io (FIXME move?) -######################################################################## -#HAL_IO = -DHAL_IO_USES_DBOARD_PINS -HAL_IO = -DHAL_IO_USES_UART - -######################################################################## -# common cflags and ldflags -######################################################################## -COMMON_CFLAGS = \ - -I$(top_srcdir)/../../host/lib/usrp \ - -I$(top_srcdir)/lib \ - $(MBGCC_CFLAGS) \ - $(LWIP_INCLUDES) \ - $(HAL_IO) - -COMMON_LFLAGS = \ - -Wl,-Map -Wl,$(@:.elf=.map) - -######################################################################## -# Common stuff for building top level microblaze images -######################################################################## -#we use COMMON_IHX_ARGS to relocate the reset and interrupt vectors to -#just below the start of code. upon creating the BIN, any leading padding -#is thrown out, so the .bin file is valid for uploading to USRP2P. this -#does not affect USRP2 because the USRP2 already starts at 0x0000, and -#because the relocate_args are not defined for USRP2's Makefile.am. -.elf.bin: - $(MB_OBJCOPY) -O binary $(RELOCATE_ARGS) $< $@ - -.elf.dump: - $(MB_OBJDUMP) -DSC $< > $@ - -.bin.rom: - $(HEXDUMP) -v -e'1/1 "%.2X\n"' $< > $@ - -.elf.ihx: - $(MB_OBJCOPY) -O ihex $(RELOCATE_ARGS) $< $@ - -_generated_from_elf = \ - $(noinst_PROGRAMS:.elf=.map) \ - $(noinst_PROGRAMS:.elf=.bin) \ - $(noinst_PROGRAMS:.elf=.dump) \ - $(noinst_PROGRAMS:.elf=.rom) \ - $(noinst_PROGRAMS:.elf=.ihx) - -noinst_DATA = $(_generated_from_elf) - -MOSTLYCLEANFILES = $(_generated_from_elf) diff --git a/firmware/microblaze/NEWS b/firmware/microblaze/NEWS deleted file mode 100644 index e69de29bb..000000000 --- a/firmware/microblaze/NEWS +++ /dev/null diff --git a/firmware/microblaze/README b/firmware/microblaze/README index 1479ffe1f..ba0aa11eb 100644 --- a/firmware/microblaze/README +++ b/firmware/microblaze/README @@ -1,3 +1,16 @@ -./bootstrap -./configure --host=mb +######################################################################## +# ZPU firmware code for USRP2 and N Series +######################################################################## +This code requires the gcc-zpu tool-chain which can be found here: + +http://opensource.zylin.com/zpudownload.html + +zpu-elf-gcc should be in your $PATH + +######################################################################## +# Run the following commands to build +######################################################################## +mkdir build +cd build +cmake ../ make diff --git a/firmware/microblaze/apps/blinkenlights.c b/firmware/microblaze/apps/blinkenlights.c index 4cebe5c9d..30cb33a7f 100644 --- a/firmware/microblaze/apps/blinkenlights.c +++ b/firmware/microblaze/apps/blinkenlights.c @@ -12,9 +12,11 @@ int main(int argc, char *argv[]) { uint32_t c = 0; uint8_t i = 0; + output_regs->led_src = 0; + while(1) { //delay(5000000); - for(c=0;c<5000000;c++) asm("NOP"); + for(c=0;c<50000;c++) asm("NOP"); output_regs->leds = (i++ % 2) ? 0xFF : 0x00; //blink everything on that register } diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c index 9c1873e1c..517b50e91 100644 --- a/firmware/microblaze/apps/txrx_uhd.c +++ b/firmware/microblaze/apps/txrx_uhd.c @@ -28,12 +28,10 @@ #include "memory_map.h" #include "spi.h" #include "hal_io.h" -#include "buffer_pool.h" #include "pic.h" #include <stdbool.h> #include "ethernet.h" #include "nonstdio.h" -#include "dbsm.h" #include <net/padded_eth_hdr.h> #include <net_common.h> #include "memcpy_wa.h" @@ -42,87 +40,12 @@ #include <string.h> #include "clocks.h" #include "usrp2/fw_common.h" -#include <i2c_async.h> #include <i2c.h> #include <ethertype.h> #include <arp_cache.h> #include "udp_fw_update.h" - -/* - * Full duplex Tx and Rx between ethernet and DSP pipelines - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu - -#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> eth -#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // eth -> dsp tx - -/* - * ================================================================ - * configure DSP TX double buffering state machine (eth -> dsp) - * ================================================================ - */ - -// DSP Tx reads ethernet header words -#define DSP_TX_FIRST_LINE ((sizeof(padded_eth_hdr_t) + sizeof(struct ip_hdr) + sizeof(struct udp_hdr))/sizeof(uint32_t)) - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_ETH, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * ================================================================ - * configure DSP RX double buffering state machine (dsp -> eth) - * ================================================================ - */ - -static const uint32_t rx_ctrl_word = 1 << 16; - -// DSP Rx writes ethernet header words -#define DSP_RX_FIRST_LINE sizeof(rx_ctrl_word)/sizeof(uint32_t) - -static bool dbsm_rx_inspector(dbsm_t *sm, int buf_this){ - size_t num_lines = buffer_pool_status->last_line[buf_this]-DSP_RX_FIRST_LINE; - ((uint32_t*)buffer_ram(buf_this))[0] = (num_lines*sizeof(uint32_t)) | (1 << 16); - return false; -} - -// receive from DSP -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to ETH -buf_cmd_args_t dsp_rx_send_args = { - PORT_ETH, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; +#include "pkt_ctrl.h" +#include "banal.h" static void setup_network(void); @@ -130,16 +53,7 @@ static void setup_network(void); // the fast-path setup global variables // ---------------------------------------------------------------- static eth_mac_addr_t fp_mac_addr_src, fp_mac_addr_dst; -static struct socket_address fp_socket_src, fp_socket_dst; - -// ---------------------------------------------------------------- -void start_rx_streaming_cmd(void); -void stop_rx_cmd(void); - -static void print_ip_addr(const void *t){ - uint8_t *p = (uint8_t *)t; - printf("%d.%d.%d.%d", p[0], p[1], p[2], p[3]); -} +extern struct socket_address fp_socket_src, fp_socket_dst; void handle_udp_data_packet( struct socket_address src, struct socket_address dst, @@ -166,41 +80,11 @@ void handle_udp_data_packet( //setup network and vrt setup_network(); - // kick off the state machine - dbsm_start(&dsp_rx_sm); - } #define OTW_GPIO_BANK_TO_NUM(bank) \ (((bank) == USRP2_DIR_RX)? (GPIO_RX_BANK) : (GPIO_TX_BANK)) -//setup the output data -static usrp2_ctrl_data_t ctrl_data_out; -static struct socket_address i2c_src; -static struct socket_address spi_src; - -static volatile bool i2c_done = false; -void i2c_read_done_callback(void) { - //printf("I2C read done callback\n"); - i2c_async_data_ready(ctrl_data_out.data.i2c_args.data); - i2c_done = true; - i2c_register_callback(0); -} - -void i2c_write_done_callback(void) { - //printf("I2C write done callback\n"); - i2c_done = true; - i2c_register_callback(0); -} - -static volatile bool spi_done = false; -static volatile uint32_t spi_readback_data; -void get_spi_readback_data(void) { - ctrl_data_out.data.spi_args.data = spi_get_data(); - spi_done = true; - spi_register_callback(0); -} - void handle_udp_ctrl_packet( struct socket_address src, struct socket_address dst, unsigned char *payload, int payload_len @@ -226,6 +110,7 @@ void handle_udp_ctrl_packet( } //setup the output data + usrp2_ctrl_data_t ctrl_data_out; ctrl_data_out.proto_ver = USRP2_FW_COMPAT_NUM; ctrl_data_out.id=USRP2_CTRL_ID_HUH_WHAT; ctrl_data_out.seq=ctrl_data_in->seq; @@ -239,7 +124,6 @@ void handle_udp_ctrl_packet( case USRP2_CTRL_ID_WAZZUP_BRO: ctrl_data_out.id = USRP2_CTRL_ID_WAZZUP_DUDE; memcpy(&ctrl_data_out.data.ip_addr, get_ip_addr(), sizeof(struct ip_addr)); - send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); break; /******************************************************************* @@ -247,21 +131,19 @@ void handle_udp_ctrl_packet( ******************************************************************/ case USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO:{ //transact - bool success = spi_async_transact( - //(ctrl_data_in->data.spi_args.readback == 0)? SPI_TXONLY : SPI_TXRX, + uint32_t result = spi_transact( + (ctrl_data_in->data.spi_args.readback == 0)? SPI_TXONLY : SPI_TXRX, ctrl_data_in->data.spi_args.dev, //which device ctrl_data_in->data.spi_args.data, //32 bit data ctrl_data_in->data.spi_args.num_bits, //length in bits - (ctrl_data_in->data.spi_args.mosi_edge == USRP2_CLK_EDGE_RISE)? SPIF_PUSH_FALL : SPIF_PUSH_RISE | //flags - (ctrl_data_in->data.spi_args.miso_edge == USRP2_CLK_EDGE_RISE)? SPIF_LATCH_RISE : SPIF_LATCH_FALL, - get_spi_readback_data //callback + (ctrl_data_in->data.spi_args.mosi_edge == USRP2_CLK_EDGE_RISE)? SPIF_PUSH_FALL : SPIF_PUSH_RISE | + (ctrl_data_in->data.spi_args.miso_edge == USRP2_CLK_EDGE_RISE)? SPIF_LATCH_RISE : SPIF_LATCH_FALL ); //load output + ctrl_data_out.data.spi_args.data = result; ctrl_data_out.id = USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE; - spi_src = src; } -// send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); break; /******************************************************************* @@ -269,13 +151,11 @@ void handle_udp_ctrl_packet( ******************************************************************/ case USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO:{ uint8_t num_bytes = ctrl_data_in->data.i2c_args.bytes; - i2c_register_callback(i2c_read_done_callback); - i2c_async_read( + i2c_read( ctrl_data_in->data.i2c_args.addr, + ctrl_data_out.data.i2c_args.data, num_bytes ); - i2c_src = src; -// i2c_dst = dst; ctrl_data_out.id = USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE; ctrl_data_out.data.i2c_args.bytes = num_bytes; } @@ -283,14 +163,11 @@ void handle_udp_ctrl_packet( case USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO:{ uint8_t num_bytes = ctrl_data_in->data.i2c_args.bytes; - i2c_register_callback(i2c_read_done_callback); - i2c_async_write( + i2c_write( ctrl_data_in->data.i2c_args.addr, ctrl_data_in->data.i2c_args.data, num_bytes ); - i2c_src = src; -// i2c_dst = dst; ctrl_data_out.id = USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE; ctrl_data_out.data.i2c_args.bytes = num_bytes; } @@ -322,7 +199,6 @@ void handle_udp_ctrl_packet( } ctrl_data_out.id = USRP2_CTRL_ID_OMG_POKED_REGISTER_SO_BAD_DUDE; - send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); break; case USRP2_CTRL_ID_PEEK_AT_THIS_REGISTER_FOR_ME_BRO: @@ -345,7 +221,6 @@ void handle_udp_ctrl_packet( } ctrl_data_out.id = USRP2_CTRL_ID_WOAH_I_DEFINITELY_PEEKED_IT_DUDE; - send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); break; case USRP2_CTRL_ID_SO_LIKE_CAN_YOU_READ_THIS_UART_BRO:{ @@ -372,32 +247,11 @@ void handle_udp_ctrl_packet( default: ctrl_data_out.id = USRP2_CTRL_ID_HUH_WHAT; - send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); } - + send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); } -/* - * Called when an ethernet packet is received. - * Return true if we handled it here, otherwise - * it'll be passed on to the DSP Tx pipe - */ -static bool -eth_pkt_inspector(dbsm_t *sm, int bufno) -{ - //point me to the ethernet frame - uint32_t *buff = (uint32_t *)buffer_ram(bufno); - - //treat this as fast-path data? - // We have to do this operation as fast as possible. - // Therefore, we do not check all the headers, - // just check that the udp port matches - // and that the vrt header is non zero. - // In the future, a hardware state machine will do this... - if ( //warning! magic numbers approaching.... - (((buff + ((2 + 14 + 20)/sizeof(uint32_t)))[0] & 0xffff) == USRP2_UDP_DATA_PORT) && - ((buff + ((2 + 14 + 20 + 8)/sizeof(uint32_t)))[1] != USRP2_INVALID_VRT_HEADER) - ) return false; +static void handle_inp_packet(uint32_t *buff, size_t num_lines){ //test if its an ip recovery packet typedef struct{ @@ -411,42 +265,30 @@ eth_pkt_inspector(dbsm_t *sm, int bufno) if (recovery_packet->eth_hdr.ethertype == 0xbeee && strncmp(recovery_packet->code, "addr", 4) == 0){ printf("Got ip recovery packet: "); print_ip_addr(&recovery_packet->data.ip_addr); newline(); set_ip_addr(&recovery_packet->data.ip_addr); - return true; + return; } //pass it to the slow-path handler - size_t len = buffer_pool_status->last_line[bufno] - 3; - handle_eth_packet(buff, len); - return true; + handle_eth_packet(buff, num_lines); } -//------------------------------------------------------------------ -/* - * 1's complement sum for IP and UDP headers - * - * init chksum to zero to start. - */ -static unsigned int -CHKSUM(unsigned int x, unsigned int *chksum) -{ - *chksum += x; - *chksum = (*chksum & 0xffff) + (*chksum>>16); - *chksum = (*chksum & 0xffff) + (*chksum>>16); - return x; -} +//------------------------------------------------------------------ /* * Called when eth phy state changes (w/ interrupts disabled) */ -volatile bool link_is_up = false; // eth handler sets this -void -link_changed_callback(int speed) -{ - link_is_up = speed != 0; - hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); - printf("\neth link changed: speed = %d\n", speed); - if (link_is_up) send_gratuitous_arp(); +void link_changed_callback(int speed){ + printf("\neth link changed: speed = %d\n", speed); + if (speed != 0){ + hal_set_leds(LED_RJ45, LED_RJ45); + pkt_ctrl_set_routing_mode(PKT_CTRL_ROUTING_MODE_MASTER); + send_gratuitous_arp(); + } + else{ + hal_set_leds(0x0, LED_RJ45); + pkt_ctrl_set_routing_mode(PKT_CTRL_ROUTING_MODE_SLAVE); + } } static void setup_network(void){ @@ -483,15 +325,6 @@ static void setup_network(void){ sr_udp_sm->udp_hdr.checksum = UDP_SM_LAST_WORD; // zero UDP checksum } -inline static void -buffer_irq_handler(unsigned irq) -{ - uint32_t status = buffer_pool_status->status; - - dbsm_process_status(&dsp_tx_sm, status); - dbsm_process_status(&dsp_rx_sm, status); -} - int main(void) { @@ -515,72 +348,41 @@ main(void) printf("Firmware compatibility number: %d\n", USRP2_FW_COMPAT_NUM); //1) register the addresses into the network stack - register_mac_addr(ethernet_mac_addr()); - register_ip_addr(get_ip_addr()); - + register_addrs(ethernet_mac_addr(), get_ip_addr()); + pkt_ctrl_program_inspector(get_ip_addr(), USRP2_UDP_CTRL_PORT, USRP2_UDP_DATA_PORT); + //2) register callbacks for udp ports we service register_udp_listener(USRP2_UDP_CTRL_PORT, handle_udp_ctrl_packet); register_udp_listener(USRP2_UDP_DATA_PORT, handle_udp_data_packet); register_udp_listener(USRP2_UDP_UPDATE_PORT, handle_udp_fw_update_packet); - //3) setup ethernet hardware to bring the link up + //3) set the routing mode to slave and send a garp + pkt_ctrl_set_routing_mode(PKT_CTRL_ROUTING_MODE_SLAVE); + send_gratuitous_arp(); + + //4) setup ethernet hardware to bring the link up ethernet_register_link_changed_callback(link_changed_callback); ethernet_init(); - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - - // initialize double buffering state machine for DSP RX -> Ethernet - - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_rx_inspector); - - sr_tx_ctrl->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); + while(true){ - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - - if(i2c_done) { - i2c_done = false; - send_udp_pkt(USRP2_UDP_CTRL_PORT, i2c_src, &ctrl_data_out, sizeof(ctrl_data_out)); - //printf("Sending UDP packet from main loop for I2C...\n"); - } - - if(spi_done) { - spi_done = false; - send_udp_pkt(USRP2_UDP_CTRL_PORT, spi_src, &ctrl_data_out, sizeof(ctrl_data_out)); + size_t num_lines; + void *buff = pkt_ctrl_claim_incoming_buffer(&num_lines); + if (buff != NULL){ + handle_inp_packet((uint32_t *)buff, num_lines); + pkt_ctrl_release_incoming_buffer(); } + pic_interrupt_handler(); int pending = pic_regs->pending; // poll for under or overrun if (pending & PIC_UNDERRUN_INT){ - //dbsm_handle_tx_underrun(&dsp_tx_sm); pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt putchar('U'); } if (pending & PIC_OVERRUN_INT){ - //dbsm_handle_rx_overrun(&dsp_rx_sm); pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt - - // FIXME Figure out how to handle this robustly. - // Any buffers that are emptying should be allowed to drain... - putchar('O'); } } diff --git a/firmware/microblaze/apps/uart_flash_loader.c b/firmware/microblaze/apps/uart_flash_loader.c index d67b84677..4ec89284a 100644 --- a/firmware/microblaze/apps/uart_flash_loader.c +++ b/firmware/microblaze/apps/uart_flash_loader.c @@ -139,8 +139,8 @@ void delay(uint32_t t) { } int main(int argc, char *argv[]) { - uint8_t buf[32]; - int i = 0; + //uint8_t buf[32]; + //int i = 0; hal_disable_ints(); // In case we got here via jmp 0x0 diff --git a/firmware/microblaze/bootstrap b/firmware/microblaze/bootstrap deleted file mode 100755 index 26987b0ec..000000000 --- a/firmware/microblaze/bootstrap +++ /dev/null @@ -1,26 +0,0 @@ -#!/bin/sh -# -# Copyright 2010 Ettus Research LLC -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -rm -rf *.cache -rm -rf libusrp2/.deps -rm -rf libusrp2p/.deps - -aclocal -autoconf -libtoolize --automake -automake --add-missing --gnu --warnings=all diff --git a/firmware/microblaze/configure.ac b/firmware/microblaze/configure.ac deleted file mode 100644 index f6986f2dd..000000000 --- a/firmware/microblaze/configure.ac +++ /dev/null @@ -1,54 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -################################################## -## Setup Autotools -################################################## -AC_PREREQ(2.60) -AC_INIT -AM_INIT_AUTOMAKE(uhd-mb, 0) - -################################################## -## Setup Compiler -################################################## -dnl Fix 2.64 cross compile detection for AVR and RTEMS -dnl by not trying to compile fopen. -m4_if(m4_defn([m4_PACKAGE_VERSION]), [2.64], - [m4_foreach([_GCC_LANG], [C, C++, Fortran, Fortran 77], - [m4_define([_AC_LANG_IO_PROGRAM(]_GCC_LANG[)], m4_defn([AC_LANG_PROGRAM(]_GCC_LANG[)]))])]) - -AC_PROG_CC([mb-gcc]) -AM_PROG_CC_C_O -LT_INIT - -################################################## -## Setup Tools -################################################## -AC_PATH_PROG([MB_OBJCOPY], [mb-objcopy]) -AC_PATH_PROG([MB_OBJDUMP], [mb-objdump]) -AC_PATH_PROG([HEXDUMP], [hexdump]) - -################################################## -## Create Files -################################################## -AC_CONFIG_FILES([ \ - Makefile \ - usrp2p/bootloader/Makefile \ - usrp2/Makefile \ - usrp2p/Makefile \ -]) -AC_OUTPUT diff --git a/firmware/microblaze/lib/CMakeLists.txt b/firmware/microblaze/lib/CMakeLists.txt new file mode 100644 index 000000000..193d63cfa --- /dev/null +++ b/firmware/microblaze/lib/CMakeLists.txt @@ -0,0 +1,47 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +SET(COMMON_SRCS + ${CMAKE_SOURCE_DIR}/lib/u2_init.c + ${CMAKE_SOURCE_DIR}/lib/abort.c + ${CMAKE_SOURCE_DIR}/lib/ad9510.c + ${CMAKE_SOURCE_DIR}/lib/clocks.c + ${CMAKE_SOURCE_DIR}/lib/eeprom.c + ${CMAKE_SOURCE_DIR}/lib/eth_addrs.c + ${CMAKE_SOURCE_DIR}/lib/eth_mac.c + ${CMAKE_SOURCE_DIR}/lib/_exit.c + ${CMAKE_SOURCE_DIR}/lib/exit.c + ${CMAKE_SOURCE_DIR}/lib/hal_io.c + ${CMAKE_SOURCE_DIR}/lib/hal_uart.c + ${CMAKE_SOURCE_DIR}/lib/i2c.c + ${CMAKE_SOURCE_DIR}/lib/mdelay.c + ${CMAKE_SOURCE_DIR}/lib/memcpy_wa.c + ${CMAKE_SOURCE_DIR}/lib/memset_wa.c + ${CMAKE_SOURCE_DIR}/lib/nonstdio.c + ${CMAKE_SOURCE_DIR}/lib/pic.c + ${CMAKE_SOURCE_DIR}/lib/pkt_ctrl.c + ${CMAKE_SOURCE_DIR}/lib/print_addrs.c + ${CMAKE_SOURCE_DIR}/lib/print_rmon_regs.c + ${CMAKE_SOURCE_DIR}/lib/print_buffer.c + ${CMAKE_SOURCE_DIR}/lib/printf.c + ${CMAKE_SOURCE_DIR}/lib/ihex.c + ${CMAKE_SOURCE_DIR}/lib/spi.c + ${CMAKE_SOURCE_DIR}/lib/net_common.c + ${CMAKE_SOURCE_DIR}/lib/arp_cache.c + ${CMAKE_SOURCE_DIR}/lib/banal.c +) diff --git a/firmware/microblaze/lib/Makefile.inc b/firmware/microblaze/lib/Makefile.inc deleted file mode 100644 index 38c630df4..000000000 --- a/firmware/microblaze/lib/Makefile.inc +++ /dev/null @@ -1,50 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -COMMON_SRCS = \ - $(top_srcdir)/lib/u2_init.c \ - $(top_srcdir)/lib/abort.c \ - $(top_srcdir)/lib/ad9510.c \ - $(top_srcdir)/lib/bsm12.c \ - $(top_srcdir)/lib/buffer_pool.c \ - $(top_srcdir)/lib/clocks.c \ - $(top_srcdir)/lib/dbsm.c \ - $(top_srcdir)/lib/eeprom.c \ - $(top_srcdir)/lib/eth_addrs.c \ - $(top_srcdir)/lib/eth_mac.c \ - $(top_srcdir)/lib/_exit.c \ - $(top_srcdir)/lib/exit.c \ - $(top_srcdir)/lib/hal_io.c \ - $(top_srcdir)/lib/hal_uart.c \ - $(top_srcdir)/lib/i2c.c \ - $(top_srcdir)/lib/i2c_async.c \ - $(top_srcdir)/lib/mdelay.c \ - $(top_srcdir)/lib/memcpy_wa.c \ - $(top_srcdir)/lib/memset_wa.c \ - $(top_srcdir)/lib/nonstdio.c \ - $(top_srcdir)/lib/pic.c \ - $(top_srcdir)/lib/print_mac_addr.c \ - $(top_srcdir)/lib/print_rmon_regs.c \ - $(top_srcdir)/lib/print_buffer.c \ - $(top_srcdir)/lib/printf.c \ - $(top_srcdir)/lib/ihex.c \ - $(top_srcdir)/lib/spi.c \ - $(top_srcdir)/lib/net_common.c \ - $(top_srcdir)/lib/arp_cache.c \ - $(top_srcdir)/lib/banal.c diff --git a/firmware/microblaze/lib/banal.h b/firmware/microblaze/lib/banal.h index 7b3c71a20..eb7ed509a 100644 --- a/firmware/microblaze/lib/banal.h +++ b/firmware/microblaze/lib/banal.h @@ -19,24 +19,8 @@ #define INCLUDED_BANAL_H #include <stdint.h> -#include <lwip/ip_addr.h> -/* - * 1's complement sum for IP and UDP headers - * - * init chksum to zero to start. - */ -static inline unsigned int -CHKSUM(unsigned int x, unsigned int *chksum) -{ - *chksum += x; - *chksum = (*chksum & 0xffff) + (*chksum>>16); - *chksum = (*chksum & 0xffff) + (*chksum>>16); - return x; -} - -unsigned int -chksum_buffer(unsigned short *buf, int nshorts, unsigned int initial_chksum); +#define dimof(x) (sizeof(x)/sizeof(x[0])) //-------------- unsigned get_int 8, 16, 32, 64 --------------// @@ -84,7 +68,4 @@ get_int64(const unsigned char *s) return get_uint64(s); } -void -print_ip(struct ip_addr ip); - #endif /* INCLUDED_BANAL_H */ diff --git a/firmware/microblaze/lib/bsm12.c b/firmware/microblaze/lib/bsm12.c deleted file mode 100644 index 3f17fe42d..000000000 --- a/firmware/microblaze/lib/bsm12.c +++ /dev/null @@ -1,319 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * buffer state machine: 1 input to two outputs - * - * Typically used to read packets from the ethernet and then after inspecting, - * handle the packet in firmware or pass it on to 1 of the 2 buffer destinations. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include "bsm12.h" -#include "memory_map.h" -#include "buffer_pool.h" -#include <stdbool.h> -#include "nonstdio.h" -#include <stdlib.h> - -typedef enum { - BS_EMPTY, - BS_FILLING, - BS_FULL, - BS_EMPTYING, -} buffer_state_t; - -static buffer_state_t buffer_state[NBUFFERS]; -static uint32_t last_send_ctrl[NBUFFERS]; -static int8_t buffer_target[NBUFFERS]; // -1, 0 or 1. -static uint8_t buffer_dst[NBUFFERS]; // 0 or 1. Valid only when BF_EMPTYING - -#define ST_IDLE (-1) - -void -bsm12_init(bsm12_t *sm, int buf0, - const buf_cmd_args_t *recv, - const buf_cmd_args_t *send0, - const buf_cmd_args_t *send1, - bsm12_inspector_t inspect) -{ - if (buf0 & 0x3) // precondition: buf0 % 4 == 0 - abort(); - - sm->buf0 = buf0; - sm->running = false; - sm->recv_args = *recv; - sm->send_args[0] = *send0; - sm->send_args[1] = *send1; - - sm->rx_state = ST_IDLE; - sm->tx_state[0] = ST_IDLE; - sm->tx_state[1] = ST_IDLE; - - sm->inspect = inspect; - - sm->bps_error = BPS_ERROR(buf0 + 0) | BPS_ERROR(buf0 + 1) | BPS_ERROR(buf0 + 2); - sm->bps_done = BPS_DONE(buf0 + 0) | BPS_DONE(buf0 + 1) | BPS_DONE(buf0 + 2); - sm->bps_error_or_done = sm->bps_error | sm->bps_done; - - // How much to adjust the last_line register. - // It's 1 for everything but the ethernet. - sm->last_line_adj = recv->port == PORT_ETH ? 3 : 1; - - buffer_state[sm->buf0 + 0] = BS_EMPTY; - buffer_state[sm->buf0 + 1] = BS_EMPTY; - buffer_state[sm->buf0 + 2] = BS_EMPTY; - - buffer_target[sm->buf0 + 0] = -1; - buffer_target[sm->buf0 + 1] = -1; - buffer_target[sm->buf0 + 2] = -1; - - for (int i = 0; i < NBUFFERS; i++) - sm->next_buf[i] = buf0; - - sm->next_buf[buf0 + 0] = buf0 + 1; - sm->next_buf[buf0 + 1] = buf0 + 2; - sm->next_buf[buf0 + 2] = buf0 + 0; - - for (int i = 0; i < 3; i++){ - sm->precomputed_receive_to_buf_ctrl_word[i] = - (BPC_READ - | BPC_BUFFER(sm->buf0 + i) - | BPC_PORT(sm->recv_args.port) - | BPC_STEP(1) - | BPC_FIRST_LINE(sm->recv_args.first_line) - | BPC_LAST_LINE(sm->recv_args.last_line)); - - for (int j = 0; j < 2; j++){ - sm->precomputed_send_from_buf_ctrl_word[i][j] = - (BPC_WRITE - | BPC_BUFFER(sm->buf0 + i) - | BPC_PORT(sm->send_args[j].port) - | BPC_STEP(1) - | BPC_FIRST_LINE(sm->send_args[j].first_line) - | BPC_LAST_LINE(0)); // last line filled in at runtime - } - } -} - -static inline void -bsm12_receive_to_buf(bsm12_t *sm, int bufno) -{ - buffer_pool_ctrl->ctrl = sm->precomputed_receive_to_buf_ctrl_word[bufno & 0x3]; -} - -static inline void -bsm12_send_from_buf(bsm12_t *sm, int bufno, int dst_idx) -{ - dst_idx &= 0x1; - - uint32_t t = - (sm->precomputed_send_from_buf_ctrl_word[bufno & 0x3][dst_idx] - | BPC_LAST_LINE(buffer_pool_status->last_line[bufno] - sm->last_line_adj)); - - buffer_pool_ctrl->ctrl = t; - last_send_ctrl[bufno] = t; - buffer_dst[bufno] = dst_idx; -} - -static inline void -bsm12_resend_from_buf(bsm12_t *sm, int bufno) -{ - buffer_pool_ctrl->ctrl = last_send_ctrl[bufno]; -} - -void -bsm12_start(bsm12_t *sm) -{ - sm->running = true; - - buffer_state[sm->buf0 + 0] = BS_EMPTY; - buffer_state[sm->buf0 + 1] = BS_EMPTY; - buffer_state[sm->buf0 + 2] = BS_EMPTY; - - buffer_target[sm->buf0 + 0] = -1; - buffer_target[sm->buf0 + 1] = -1; - buffer_target[sm->buf0 + 2] = -1; - - bp_clear_buf(sm->buf0 + 0); - bp_clear_buf(sm->buf0 + 1); - bp_clear_buf(sm->buf0 + 2); - - sm->rx_state = 0; - sm->tx_state[0] = ST_IDLE; - sm->tx_state[1] = ST_IDLE; - bsm12_receive_to_buf(sm, sm->buf0); - buffer_state[sm->buf0] = BS_FILLING; -} - -void -bsm12_stop(bsm12_t *sm) -{ - sm->running = false; - bp_clear_buf(sm->buf0 + 0); - bp_clear_buf(sm->buf0 + 1); - bp_clear_buf(sm->buf0 + 2); - buffer_state[sm->buf0 + 0] = BS_EMPTY; - buffer_state[sm->buf0 + 1] = BS_EMPTY; - buffer_state[sm->buf0 + 2] = BS_EMPTY; -} - -static void bsm12_process_helper(bsm12_t *sm, int buf_this); -static void bsm12_error_helper(bsm12_t *sm, int buf_this); - -void -bsm12_process_status(bsm12_t *sm, uint32_t status) -{ - // anything for us? - if ((status & sm->bps_error_or_done) == 0 || !sm->running) - return; - - if (status & sm->bps_error){ - // Most likely an ethernet Rx error. We just restart the transfer. - if (status & (BPS_ERROR(sm->buf0 + 0))) - bsm12_error_helper(sm, sm->buf0 + 0); - - if (status & (BPS_ERROR(sm->buf0 + 1))) - bsm12_error_helper(sm, sm->buf0 + 1); - - if (status & (BPS_ERROR(sm->buf0 + 2))) - bsm12_error_helper(sm, sm->buf0 + 2); - } - - if (status & BPS_DONE(sm->buf0 + 0)) - bsm12_process_helper(sm, sm->buf0 + 0); - - if (status & BPS_DONE(sm->buf0 + 1)) - bsm12_process_helper(sm, sm->buf0 + 1); - - if (status & BPS_DONE(sm->buf0 + 2)) - bsm12_process_helper(sm, sm->buf0 + 2); -} - - static void -bsm12_process_helper(bsm12_t *sm, int buf_this) -{ - bp_clear_buf(buf_this); - - if (buffer_state[buf_this] == BS_FILLING){ - - buffer_state[buf_this] = BS_FULL; - buffer_target[buf_this] = -1; - - // - // where does this packet go? - // - int dst = sm->inspect(sm, buf_this); - if (dst == -1){ - // - // f/w handled the packet; refill the buffer - // - bsm12_receive_to_buf(sm, buf_this); - buffer_state[buf_this] = BS_FILLING; - buffer_target[buf_this] = -1; - sm->rx_state = buf_this & 0x3; - } - else { // goes to dst 0 or 1 - // - // If the next buffer is empty, start a receive on it - // - int t = sm->next_buf[buf_this]; - if (buffer_state[t] == BS_EMPTY){ - bsm12_receive_to_buf(sm, t); - buffer_state[t] = BS_FILLING; - buffer_target[t] = -1; - sm->rx_state = t & 0x3; - } - else - sm->rx_state = ST_IDLE; - - // - // If the destination is idle, start the xfer, othewise remember it - // - if (sm->tx_state[dst] == ST_IDLE){ - bsm12_send_from_buf(sm, buf_this, dst); - sm->tx_state[dst] = buf_this & 0x3; - buffer_state[buf_this] = BS_EMPTYING; - buffer_target[buf_this] = -1; - } - else { - buffer_target[buf_this] = dst; - } - } - } - - else { // BS_EMPTYING - - buffer_state[buf_this] = BS_EMPTY; - buffer_target[buf_this] = -1; - - if (sm->rx_state == ST_IDLE){ // fire off another receive - sm->rx_state = buf_this & 0x3; - bsm12_receive_to_buf(sm, buf_this); - buffer_state[buf_this] = BS_FILLING; - buffer_target[buf_this] = -1; - } - - int dst = buffer_dst[buf_this]; // the dst we were emptying into - // is the next buffer full and for us? - int t = sm->next_buf[buf_this]; - if (buffer_target[t] == dst){ // yes, - bsm12_send_from_buf(sm, t, dst); // send it - buffer_state[t] = BS_EMPTYING; - buffer_target[t] = -1; - sm->tx_state[dst] = t & 0x3; - } - // how about the one after that? - else if (buffer_target[t=sm->next_buf[t]] == dst){ // yes, - bsm12_send_from_buf(sm, t, dst); // send it - buffer_state[t] = BS_EMPTYING; - buffer_target[t] = -1; - sm->tx_state[dst] = t & 0x3; - } - else { - sm->tx_state[dst] = ST_IDLE; - } - } -} - -static void -bsm12_error_helper(bsm12_t *sm, int buf_this) -{ - bp_clear_buf(buf_this); // clears ERROR flag - - if (buffer_state[buf_this] == BS_FILLING){ - bsm12_receive_to_buf(sm, buf_this); // restart the xfer - } - else { // buffer was emptying - bsm12_resend_from_buf(sm, buf_this); // restart the xfer - } -} - - -void -bsm12_handle_tx_underrun(bsm12_t *sm) -{ -} - -void -bsm12_handle_rx_overrun(bsm12_t *sm) -{ -} diff --git a/firmware/microblaze/lib/bsm12.h b/firmware/microblaze/lib/bsm12.h deleted file mode 100644 index b8e576b79..000000000 --- a/firmware/microblaze/lib/bsm12.h +++ /dev/null @@ -1,83 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef INCLUDED_BSM12_H -#define INCLUDED_BSM12_H - -#include "dbsm.h" -#include "memory_map.h" - -/*! - * buffer state machine: 1 input to two outputs - * - * Typically used to read packets from the ethernet and then after inspecting, - * handle the packet in firmware or pass it on to 1 of the 2 buffer destinations. - */ - -struct _bsm12; -typedef struct _bsm12 bsm12_t; - -/*! - * Pointer to function that does packet inspection. - * - * \param sm the state machine - * \param buf_this the index of the buffer to inspect and/or pass on - * - * Returns -1, 0 or 1. If it returns -1, it means that the s/w - * handled that packet, and that it should NOT be passed on to one of - * the buffer endpoints. 0 indicates the first endpoint, 1 the second endpoint. - */ -typedef int (*bsm12_inspector_t)(bsm12_t *sm, int buf_this); - - -/*! - * buffer state machine: 1 input to two outputs - */ -struct _bsm12 -{ - uint8_t buf0; // This machine uses buf0, buf0+1 and buf0+2. buf0 % 4 == 0. - uint8_t running; - int8_t rx_state; // -1, 0, 1, 2 which buffer we're receiving into - int8_t tx_state[2]; // -1, 0, 1, 2 which buffer we're sending from - buf_cmd_args_t recv_args; - buf_cmd_args_t send_args[2]; - bsm12_inspector_t inspect; - int last_line_adj; - uint32_t bps_error; - uint32_t bps_done; - uint32_t bps_error_or_done; - uint8_t next_buf[NBUFFERS]; - uint32_t precomputed_receive_to_buf_ctrl_word[3]; - uint32_t precomputed_send_from_buf_ctrl_word[4][2]; // really only 3, not 4 - // (easier addr comp) -}; - -void bsm12_init(bsm12_t *sm, int buf0, - const buf_cmd_args_t *recv, - const buf_cmd_args_t *send0, - const buf_cmd_args_t *send1, - bsm12_inspector_t inspect); - -void bsm12_start(bsm12_t *sm); -void bsm12_stop(bsm12_t *sm); -void bsm12_process_status(bsm12_t *sm, uint32_t status); -void bsm12_handle_tx_underrun(bsm12_t *sm); -void bsm12_handle_rx_overrun(bsm12_t *sm); - - -#endif /* INCLUDED_BSM12_H */ diff --git a/firmware/microblaze/lib/buffer_pool.c b/firmware/microblaze/lib/buffer_pool.c deleted file mode 100644 index 77e7c5213..000000000 --- a/firmware/microblaze/lib/buffer_pool.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "memory_map.h" -#include "buffer_pool.h" -#include "hal_io.h" - -void -bp_init(void) -{ - int i; - bp_disable_port(PORT_SERDES); - bp_disable_port(PORT_DSP); - bp_disable_port(PORT_ETH); - bp_disable_port(PORT_RAM); - - for (i = 0; i < NBUFFERS; i++) - bp_clear_buf(i); -} - -#ifndef INLINE_BUFFER_POOL - -void -bp_clear_buf(int bufnum) -{ - buffer_pool_ctrl->ctrl = BPC_BUFFER(bufnum) | BPC_PORT_NIL | BPC_CLR; -} - -void -bp_disable_port(int portnum) -{ - // disable buffer connections to this port - buffer_pool_ctrl->ctrl = BPC_BUFFER_NIL | BPC_PORT(portnum); -} - -void -bp_receive_to_buf(int bufnum, int port, int step, int fl, int ll) -{ - buffer_pool_ctrl->ctrl = (BPC_READ - | BPC_BUFFER(bufnum) - | BPC_PORT(port) - | BPC_STEP(step) - | BPC_FIRST_LINE(fl) - | BPC_LAST_LINE(ll)); -} - -void -bp_send_from_buf(int bufnum, int port, int step, int fl, int ll) -{ - buffer_pool_ctrl->ctrl = (BPC_WRITE - | BPC_BUFFER(bufnum) - | BPC_PORT(port) - | BPC_STEP(step) - | BPC_FIRST_LINE(fl) - | BPC_LAST_LINE(ll)); -} - -#endif diff --git a/firmware/microblaze/lib/buffer_pool.h b/firmware/microblaze/lib/buffer_pool.h deleted file mode 100644 index 145b20f8d..000000000 --- a/firmware/microblaze/lib/buffer_pool.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef INCLUDED_BUFFER_POOL_H -#define INCLUDED_BUFFER_POOL_H - -#include "memory_map.h" - -// Buffer Pool Management - - -// define to have common buffer operations inlined -#define INLINE_BUFFER_POOL 1 - -void bp_init(void); - -#ifndef INLINE_BUFFER_POOL - -void bp_clear_buf(int bufnum); -void bp_disable_port(int portnum); -void bp_receive_to_buf(int bufnum, int port, int step, int fl, int ll); -void bp_send_from_buf(int bufnum, int port, int step, int fl, int ll); - -#else - -static inline void -bp_clear_buf(int bufnum) -{ - buffer_pool_ctrl->ctrl = BPC_BUFFER(bufnum) | BPC_PORT_NIL | BPC_CLR; -} - -static inline void -bp_disable_port(int portnum) -{ - // disable buffer connections to this port - buffer_pool_ctrl->ctrl = BPC_BUFFER_NIL | BPC_PORT(portnum); -} - -static inline void -bp_receive_to_buf(int bufnum, int port, int step, int fl, int ll) -{ - buffer_pool_ctrl->ctrl = (BPC_READ - | BPC_BUFFER(bufnum) - | BPC_PORT(port) - | BPC_STEP(step) - | BPC_FIRST_LINE(fl) - | BPC_LAST_LINE(ll)); -} - -static inline void -bp_send_from_buf(int bufnum, int port, int step, int fl, int ll) -{ - buffer_pool_ctrl->ctrl = (BPC_WRITE - | BPC_BUFFER(bufnum) - | BPC_PORT(port) - | BPC_STEP(step) - | BPC_FIRST_LINE(fl) - | BPC_LAST_LINE(ll)); -} -#endif -#endif diff --git a/firmware/microblaze/lib/compiler.h b/firmware/microblaze/lib/compiler.h index 4fa9b49f8..f677bdc3b 100644 --- a/firmware/microblaze/lib/compiler.h +++ b/firmware/microblaze/lib/compiler.h @@ -1,6 +1,6 @@ /* -*- c++ -*- */ /* - * Copyright 2009 Ettus Research LLC + * Copyright 2009, 2010 Ettus Research LLC * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,5 +21,6 @@ // FIXME gcc specific. #define _AL4 __attribute__((aligned (4))) +#define FORCE_INLINE inline __attribute__((always_inline)) #endif /* INCLUDED_COMPILER_H */ diff --git a/firmware/microblaze/lib/dbsm.c b/firmware/microblaze/lib/dbsm.c deleted file mode 100644 index cee343eaa..000000000 --- a/firmware/microblaze/lib/dbsm.c +++ /dev/null @@ -1,299 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * Double Buffering State Machine - */ - -#include "dbsm.h" -#include "memory_map.h" -#include "buffer_pool.h" -#include <stdbool.h> -#include "nonstdio.h" -#include <stdlib.h> - -typedef enum { - BS_EMPTY, - BS_FILLING, - BS_FULL, - BS_EMPTYING, -} buffer_state_t; - -static buffer_state_t buffer_state[NBUFFERS]; - -bool -dbsm_nop_inspector(dbsm_t *sm, int buf_this) -{ - return false; -} - -void -dbsm_init(dbsm_t *sm, int buf0, - const buf_cmd_args_t *recv, const buf_cmd_args_t *send, - inspector_t inspect) -{ - if (buf0 & 0x1) // must be even - abort(); - - sm->buf0 = buf0; - sm->running = false; - sm->recv_args = *recv; - sm->send_args = *send; - - sm->rx_idle = true; - sm->tx_idle = true; - - sm->inspect = inspect; - - // How much to adjust the last_line register. - // It's 1 for everything but the ethernet. - //sm->last_line_adj = recv->port == PORT_ETH ? 3 : 1; - sm->last_line_adj = 1; - - buffer_state[sm->buf0] = BS_EMPTY; - buffer_state[sm->buf0 ^ 1] = BS_EMPTY; - - sm->precomputed_receive_to_buf_ctrl_word[0] = - (BPC_READ - | BPC_BUFFER(sm->buf0) - | BPC_PORT(sm->recv_args.port) - | BPC_STEP(1) - | BPC_FIRST_LINE(sm->recv_args.first_line) - | BPC_LAST_LINE(sm->recv_args.last_line)); - - sm->precomputed_receive_to_buf_ctrl_word[1] = - (BPC_READ - | BPC_BUFFER(sm->buf0 ^ 1) - | BPC_PORT(sm->recv_args.port) - | BPC_STEP(1) - | BPC_FIRST_LINE(sm->recv_args.first_line) - | BPC_LAST_LINE(sm->recv_args.last_line)); - - sm->precomputed_send_from_buf_ctrl_word[0] = - (BPC_WRITE - | BPC_BUFFER(sm->buf0) - | BPC_PORT(sm->send_args.port) - | BPC_STEP(1) - | BPC_FIRST_LINE(sm->send_args.first_line) - | BPC_LAST_LINE(0)); // last line filled in at runtime - - sm->precomputed_send_from_buf_ctrl_word[1] = - (BPC_WRITE - | BPC_BUFFER(sm->buf0 ^ 1) - | BPC_PORT(sm->send_args.port) - | BPC_STEP(1) - | BPC_FIRST_LINE(sm->send_args.first_line) - | BPC_LAST_LINE(0)); // last line filled in at runtime - -} - -static inline void -dbsm_receive_to_buf(dbsm_t *sm, int bufno) -{ - buffer_pool_ctrl->ctrl = sm->precomputed_receive_to_buf_ctrl_word[bufno & 1]; -} - -static inline void -dbsm_send_from_buf(dbsm_t *sm, int bufno) -{ - buffer_pool_ctrl->ctrl = - (sm->precomputed_send_from_buf_ctrl_word[bufno & 1] - | BPC_LAST_LINE(buffer_pool_status->last_line[bufno] - sm->last_line_adj)); -} - -void -dbsm_start(dbsm_t *sm) -{ - // printf("dbsm_start: buf0 = %d, recv_port = %d\n", sm->buf0, sm->recv_args.port); - - sm->running = true; - - buffer_state[sm->buf0] = BS_EMPTY; - buffer_state[sm->buf0 ^ 1] = BS_EMPTY; - - bp_clear_buf(sm->buf0); - bp_clear_buf(sm->buf0 ^ 1); - - sm->tx_idle = true; - sm->rx_idle = false; - dbsm_receive_to_buf(sm, sm->buf0); - buffer_state[sm->buf0] = BS_FILLING; - -} - - -void -dbsm_stop(dbsm_t *sm) -{ - sm->running = false; - bp_clear_buf(sm->buf0); - bp_clear_buf(sm->buf0 ^ 1); - buffer_state[sm->buf0] = BS_EMPTY; - buffer_state[sm->buf0 ^ 1] = BS_EMPTY; -} - -static void dbsm_process_helper(dbsm_t *sm, int buf_this); -static void dbsm_error_helper(dbsm_t *sm, int buf_this); - -void -dbsm_process_status(dbsm_t *sm, uint32_t status) -{ - if (!sm->running) - return; - - if (status & (BPS_ERROR(sm->buf0) | BPS_ERROR(sm->buf0 ^ 1))){ - putchar('E'); - // Most likely an ethernet Rx error. We just restart the transfer. - if (status & (BPS_ERROR(sm->buf0))) - dbsm_error_helper(sm, sm->buf0); - //dbsm_process_helper(sm, sm->buf0); //forward errors - - if (status & (BPS_ERROR(sm->buf0 ^ 1))) - dbsm_error_helper(sm, sm->buf0 ^ 1); - //dbsm_process_helper(sm, sm->buf0 ^ 1); //forward errors - } - - if (status & BPS_DONE(sm->buf0)) - dbsm_process_helper(sm, sm->buf0); - - if (status & BPS_DONE(sm->buf0 ^ 1)) - dbsm_process_helper(sm, sm->buf0 ^ 1); -} - -static void -dbsm_process_helper(dbsm_t *sm, int buf_this) -{ - int buf_other = buf_this ^ 1; - - bp_clear_buf(buf_this); - - if (buffer_state[buf_this] == BS_FILLING){ - buffer_state[buf_this] = BS_FULL; - // - // does s/w handle this packet? - // - if (sm->inspect(sm, buf_this)){ - // s/w handled the packet; refill the buffer - dbsm_receive_to_buf(sm, buf_this); - buffer_state[buf_this] = BS_FILLING; - } - - else { // s/w didn't handle this; pass it on - - if(buffer_state[buf_other] == BS_EMPTY){ - dbsm_receive_to_buf(sm, buf_other); - buffer_state[buf_other] = BS_FILLING; - } - else - sm->rx_idle = true; - - if (sm->tx_idle){ - sm->tx_idle = false; - dbsm_send_from_buf(sm, buf_this); - buffer_state[buf_this] = BS_EMPTYING; - } - } - } - else { // buffer was emptying - buffer_state[buf_this] = BS_EMPTY; - if (sm->rx_idle){ - sm->rx_idle = false; - dbsm_receive_to_buf(sm, buf_this); - buffer_state[buf_this] = BS_FILLING; - } - if (buffer_state[buf_other] == BS_FULL){ - dbsm_send_from_buf(sm, buf_other); - buffer_state[buf_other] = BS_EMPTYING; - } - else - sm->tx_idle = true; - } -} - -static void -dbsm_error_helper(dbsm_t *sm, int buf_this) -{ - bp_clear_buf(buf_this); // clears ERROR flag - - if (buffer_state[buf_this] == BS_FILLING){ - dbsm_receive_to_buf(sm, buf_this); // restart the xfer - } - else { // buffer was emptying - dbsm_send_from_buf(sm, buf_this); // restart the xfer - } -} - -/* - * Handle DSP Tx underrun - */ -void -dbsm_handle_tx_underrun(dbsm_t *sm) -{ - // clear the DSP Tx state machine - sr_tx_ctrl->clear_state = 1; - - // If there's a buffer that's empyting, clear it & flush xfer - - if (buffer_state[sm->buf0] == BS_EMPTYING){ - bp_clear_buf(sm->buf0); - sr_tx_ctrl->clear_state = 1; // flush partial packet - // drop frame in progress on ground. Pretend it finished - dbsm_process_helper(sm, sm->buf0); - } - else if (buffer_state[sm->buf0 ^ 1] == BS_EMPTYING){ - bp_clear_buf(sm->buf0 ^ 1); - sr_tx_ctrl->clear_state = 1; // flush partial packet - // drop frame in progress on ground. Pretend it finished - dbsm_process_helper(sm, sm->buf0 ^ 1); - } -} - -/* - * Handle DSP Rx overrun - */ -void -dbsm_handle_rx_overrun(dbsm_t *sm) -{ - sr_rx_ctrl->clear_overrun = 1; - - // If there's a buffer that's filling, clear it. - // Any restart will be the job of the caller. - - if (buffer_state[sm->buf0] == BS_FILLING) - bp_clear_buf(sm->buf0); - - if (buffer_state[sm->buf0 ^1] == BS_FILLING) - bp_clear_buf(sm->buf0 ^ 1); -} - -void -dbsm_wait_for_opening(dbsm_t *sm) -{ - if (buffer_state[sm->buf0] == BS_EMPTYING){ - // wait for xfer to complete - int mask = BPS_DONE(sm->buf0) | BPS_ERROR(sm->buf0) | BPS_IDLE(sm->buf0); - while ((buffer_pool_status->status & mask) == 0) - ; - } - else if (buffer_state[sm->buf0 ^ 1] == BS_EMPTYING){ - // wait for xfer to complete - int mask = BPS_DONE(sm->buf0 ^ 1) | BPS_ERROR(sm->buf0 ^ 1) | BPS_IDLE(sm->buf0 ^ 1); - while ((buffer_pool_status->status & mask) == 0) - ; - } -} diff --git a/firmware/microblaze/lib/dbsm.h b/firmware/microblaze/lib/dbsm.h deleted file mode 100644 index cb7e12fc3..000000000 --- a/firmware/microblaze/lib/dbsm.h +++ /dev/null @@ -1,90 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef INCLUDED_DBSM_H -#define INCLUDED_DBSM_H - -/* - * Double Buffering State Machine - */ - -#include <stdint.h> -#include <stdbool.h> - -struct _dbsm; -typedef struct _dbsm dbsm_t; - -/* - * pointer to function that does packet inspection. - * - * If one of these returns true, it means that the s/w - * handled that packet, and that it should NOT be passed - * on to the normal destination port. - */ -typedef bool (*inspector_t)(dbsm_t *sm, int buf_this); - -bool dbsm_nop_inspector(dbsm_t *sm, int buf_this); // returns false - - -typedef struct -{ - uint16_t port; - uint16_t first_line; - uint16_t last_line; -} buf_cmd_args_t; - -/*! - * double buffer state machine - */ -struct _dbsm -{ - uint8_t buf0; // Must be even. This machine uses buf0 and buf0+1 - uint8_t running; - uint8_t rx_idle; - uint8_t tx_idle; - buf_cmd_args_t recv_args; - buf_cmd_args_t send_args; - inspector_t inspect; - uint32_t precomputed_receive_to_buf_ctrl_word[2]; - uint32_t precomputed_send_from_buf_ctrl_word[2]; - int last_line_adj; -}; - -void dbsm_init(dbsm_t *sm, int buf0, - const buf_cmd_args_t *recv, const buf_cmd_args_t *send, - inspector_t inspect); - -void dbsm_start(dbsm_t *sm); -void dbsm_stop(dbsm_t *sm); -void dbsm_process_status(dbsm_t *sm, uint32_t status); -void dbsm_handle_tx_underrun(dbsm_t *sm); -void dbsm_handle_rx_overrun(dbsm_t *sm); - -/* - * The cpu calls this when it want to ensure that it can send a buffer - * to the same destination being used by this state machine. - * - * If neither buffer is EMPTYING it returns immediately. If a buffer - * is EMPYTING, it waits for the h/w to transition to the DONE or - * ERROR state. - * - * When this function returns, the caller queues it's buffer and busy - * waits for it to complete. - */ -void dbsm_wait_for_opening(dbsm_t *sm); - -#endif /* INCLUDED_DBSM_H */ diff --git a/firmware/microblaze/lib/eth_mac.c b/firmware/microblaze/lib/eth_mac.c index 034a4d494..581a5c69f 100644 --- a/firmware/microblaze/lib/eth_mac.c +++ b/firmware/microblaze/lib/eth_mac.c @@ -28,6 +28,7 @@ void eth_mac_set_addr(const eth_mac_addr_t *src) { + /* disable because MAC_SET_PASS_ALL is set below eth_mac->ucast_hi = (((unsigned int)src->addr[0])<<8) + ((unsigned int)src->addr[1]); @@ -36,6 +37,7 @@ eth_mac_set_addr(const eth_mac_addr_t *src) (((unsigned int)src->addr[3])<<16) + (((unsigned int)src->addr[4])<<8) + (((unsigned int)src->addr[5])); +*/ } @@ -45,7 +47,7 @@ eth_mac_init(const eth_mac_addr_t *src) eth_mac->miimoder = 25; // divider from CPU clock (50MHz/25 = 2MHz) eth_mac_set_addr(src); - eth_mac->settings = MAC_SET_PAUSE_EN | MAC_SET_PASS_BCAST | MAC_SET_PASS_UCAST | MAC_SET_PAUSE_SEND_EN; + eth_mac->settings = MAC_SET_PAUSE_EN | MAC_SET_PASS_BCAST | MAC_SET_PASS_UCAST | MAC_SET_PAUSE_SEND_EN | MAC_SET_PASS_ALL; eth_mac->pause_time = 38; eth_mac->pause_thresh = 1200; diff --git a/firmware/microblaze/lib/hal_io.h b/firmware/microblaze/lib/hal_io.h index 950f8d591..574df7d3e 100644 --- a/firmware/microblaze/lib/hal_io.h +++ b/firmware/microblaze/lib/hal_io.h @@ -70,13 +70,7 @@ hal_set_timeout(int delta_ticks) static inline int hal_disable_ints(void) { - int result, t0; - - asm volatile("mfs %0, rmsr \n\ - andni %1, %0, 0x2 \n\ - mts rmsr, %1" - : "=r" (result), "=r" (t0)); - return result; + return 0; /* NOP */ } /*! @@ -86,13 +80,7 @@ hal_disable_ints(void) static inline int hal_enable_ints(void) { - int result, t0; - - asm volatile("mfs %0, rmsr \n\ - ori %1, %0, 0x2 \n\ - mts rmsr, %1" - : "=r" (result), "=r" (t0)); - return result; + return 0; /* NOP */ } /*! @@ -102,13 +90,7 @@ hal_enable_ints(void) static inline void hal_restore_ints(int prev_state) { - int t0, t1; - asm volatile("andi %0, %2, 0x2 \n\ - mfs %1, rmsr \n\ - andni %1, %1, 0x2 \n\ - or %1, %1, %0 \n\ - mts rmsr, %1" - : "=r" (t0), "=r"(t1) : "r" (prev_state)); + /* NOP */ } #endif /* INCLUDED_HAL_IO_H */ diff --git a/firmware/microblaze/lib/hal_uart.c b/firmware/microblaze/lib/hal_uart.c index 7836240fe..f0921f4f0 100644 --- a/firmware/microblaze/lib/hal_uart.c +++ b/firmware/microblaze/lib/hal_uart.c @@ -113,7 +113,7 @@ hal_uart_getc_timeout(hal_uart_name_t u) int hal_uart_rx_flush(hal_uart_name_t u) { - char x; + char x = 0; while(uart_regs[u].rxlevel) x = uart_regs[u].rxchar; return x; } diff --git a/firmware/microblaze/lib/mdelay.c b/firmware/microblaze/lib/mdelay.c index c8c119b1a..958acf3f5 100644 --- a/firmware/microblaze/lib/mdelay.c +++ b/firmware/microblaze/lib/mdelay.c @@ -30,7 +30,7 @@ inline static void delay_1ms(int loop_count) { - int i; +/* int i; for (i = 0; i < loop_count; i++){ asm volatile ("or r0, r0, r0\n\ or r0, r0, r0\n\ @@ -40,6 +40,7 @@ delay_1ms(int loop_count) or r0, r0, r0\n\ or r0, r0, r0\n"); } +*/ } // delay about ms milliseconds diff --git a/firmware/microblaze/lib/net/.gitignore b/firmware/microblaze/lib/net/.gitignore deleted file mode 100644 index 282522db0..000000000 --- a/firmware/microblaze/lib/net/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -Makefile -Makefile.in diff --git a/firmware/microblaze/lib/net_common.c b/firmware/microblaze/lib/net_common.c index 6305408d6..a34ca615b 100644 --- a/firmware/microblaze/lib/net_common.c +++ b/firmware/microblaze/lib/net_common.c @@ -22,7 +22,6 @@ #include "net_common.h" #include "banal.h" #include <hal_io.h> -#include <buffer_pool.h> #include <memory_map.h> #include <memcpy_wa.h> #include <ethernet.h> @@ -36,28 +35,21 @@ #include "if_arp.h" #include <ethertype.h> #include <string.h> +#include "pkt_ctrl.h" +static const bool debug = false; -int cpu_tx_buf_dest_port = PORT_ETH; +static const eth_mac_addr_t BCAST_MAC_ADDR = {{0xff, 0xff, 0xff, 0xff, 0xff, 0xff}}; -// If this is non-zero, this dbsm could be writing to the ethernet -dbsm_t *ac_could_be_sending_to_eth; - -static inline bool -ip_addr_eq(const struct ip_addr a, const struct ip_addr b) -{ - return a.addr == b.addr; -} +//used in the top level application... +struct socket_address fp_socket_src, fp_socket_dst; // ------------------------------------------------------------------------ static eth_mac_addr_t _local_mac_addr; -void register_mac_addr(const eth_mac_addr_t *mac_addr){ - _local_mac_addr = *mac_addr; -} - static struct ip_addr _local_ip_addr; -void register_ip_addr(const struct ip_addr *ip_addr){ +void register_addrs(const eth_mac_addr_t *mac_addr, const struct ip_addr *ip_addr){ + _local_mac_addr = *mac_addr; _local_ip_addr = *ip_addr; } @@ -126,13 +118,6 @@ send_pkt(eth_mac_addr_t dst, int ethertype, const void *buf1, size_t len1, const void *buf2, size_t len2) { - // Wait for buffer to become idle - // FIXME can this ever not be ready? - - //hal_set_leds(LED_BUF_BUSY, LED_BUF_BUSY); - while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) - ; - //hal_set_leds(0, LED_BUF_BUSY); // Assemble the header padded_eth_hdr_t ehdr; @@ -141,9 +126,10 @@ send_pkt(eth_mac_addr_t dst, int ethertype, ehdr.src = _local_mac_addr; ehdr.ethertype = ethertype; - uint32_t *p = buffer_ram(CPU_TX_BUF); + uint32_t *buff = (uint32_t *)pkt_ctrl_claim_outgoing_buffer(); // Copy the pieces into the buffer + uint32_t *p = buff; *p++ = 0x0; // slow path memcpy_wa(p, &ehdr, sizeof(ehdr)); // 4 lines p += sizeof(ehdr)/sizeof(uint32_t); @@ -173,34 +159,23 @@ send_pkt(eth_mac_addr_t dst, int ethertype, p += len2/sizeof(uint32_t); } - size_t total_len = (p - buffer_ram(CPU_TX_BUF)) * sizeof(uint32_t); + size_t total_len = (p - buff) * sizeof(uint32_t); if (total_len < 60) // ensure that we don't try to send a short packet total_len = 60; - - // wait until nobody else is sending to the ethernet - if (ac_could_be_sending_to_eth){ - //hal_set_leds(LED_ETH_BUSY, LED_ETH_BUSY); - dbsm_wait_for_opening(ac_could_be_sending_to_eth); - //hal_set_leds(0x0, LED_ETH_BUSY); - } - - if (0){ - printf("send_pkt to port %d, len = %d\n", - cpu_tx_buf_dest_port, (int) total_len); - print_buffer(buffer_ram(CPU_TX_BUF), total_len/4); - } - - // fire it off - bp_send_from_buf(CPU_TX_BUF, cpu_tx_buf_dest_port, 1, 0, total_len/4); - // wait for it to complete (not long, it's a small pkt) - while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) - ; + pkt_ctrl_commit_outgoing_buffer(total_len/4); + if (debug) printf("sent %d bytes\n", (int)total_len); +} - bp_clear_buf(CPU_TX_BUF); +unsigned int CHKSUM(unsigned int x, unsigned int *chksum) +{ + *chksum += x; + *chksum = (*chksum & 0xffff) + (*chksum>>16); + *chksum = (*chksum & 0xffff) + (*chksum>>16); + return x; } -unsigned int +static unsigned int chksum_buffer(unsigned short *buf, int nshorts, unsigned int initial_chksum) { unsigned int chksum = initial_chksum; @@ -210,7 +185,6 @@ chksum_buffer(unsigned short *buf, int nshorts, unsigned int initial_chksum) return chksum; } - void send_ip_pkt(struct ip_addr dst, int protocol, const void *buf0, size_t len0, @@ -235,7 +209,7 @@ send_ip_pkt(struct ip_addr dst, int protocol, bool found = arp_cache_lookup_mac(&ip.dest, &dst_mac); if (!found){ printf("net_common: failed to hit cache looking for "); - print_ip(ip.dest); + print_ip_addr(&ip.dest); newline(); return; } @@ -294,6 +268,11 @@ handle_icmp_packet(struct ip_addr src, struct ip_addr dst, if (icmp->code == ICMP_DUR_PORT){ // port unreachable //handle destination port unreachable (the host ctrl+c'd the app): + //filter out non udp data response + struct ip_hdr *ip = (struct ip_hdr *)(((uint8_t*)icmp) + sizeof(struct icmp_echo_hdr)); + struct udp_hdr *udp = (struct udp_hdr *)(((char *)ip) + IP_HLEN); + if (IPH_PROTO(ip) != IP_PROTO_UDP || udp->dest != fp_socket_dst.port) return; + //end async update packets per second sr_tx_ctrl->cyc_per_up = 0; @@ -373,8 +352,7 @@ void send_gratuitous_arp(void){ memcpy(req.ar_tip, get_ip_addr(), sizeof(struct ip_addr)); //send the request with a broadcast ethernet mac address - eth_mac_addr_t t; memset(&t, 0xff, sizeof(t)); - send_pkt(t, ETHERTYPE_ARP, &req, sizeof(req), 0, 0, 0, 0); + send_pkt(BCAST_MAC_ADDR, ETHERTYPE_ARP, &req, sizeof(req), 0, 0, 0, 0); } static void @@ -412,7 +390,7 @@ handle_arp_packet(struct arp_eth_ipv4 *p, size_t size) sip.addr = get_int32(p->ar_sip); tip.addr = get_int32(p->ar_tip); - if (ip_addr_eq(tip, _local_ip_addr)){ // They're looking for us... + if (memcmp(&tip, &_local_ip_addr, sizeof(_local_ip_addr)) == 0){ // They're looking for us... send_arp_reply(p, _local_mac_addr); } } @@ -420,15 +398,17 @@ handle_arp_packet(struct arp_eth_ipv4 *p, size_t size) void handle_eth_packet(uint32_t *p, size_t nlines) { - //print_buffer(p, nlines); + static size_t bcount = 0; + if (debug) printf("===> %d\n", (int)bcount++); + if (debug) print_buffer(p, nlines); - int ethertype = p[3] & 0xffff; + padded_eth_hdr_t *eth_hdr = (padded_eth_hdr_t *)p; - if (ethertype == ETHERTYPE_ARP){ + if (eth_hdr->ethertype == ETHERTYPE_ARP){ struct arp_eth_ipv4 *arp = (struct arp_eth_ipv4 *)(p + 4); handle_arp_packet(arp, nlines*sizeof(uint32_t) - 14); } - else if (ethertype == ETHERTYPE_IPV4){ + else if (eth_hdr->ethertype == ETHERTYPE_IPV4){ struct ip_hdr *ip = (struct ip_hdr *)(p + 4); if (IPH_V(ip) != 4 || IPH_HL(ip) != 5) // ignore pkts w/ bad version or options return; @@ -436,7 +416,10 @@ handle_eth_packet(uint32_t *p, size_t nlines) if (IPH_OFFSET(ip) & (IP_MF | IP_OFFMASK)) // ignore fragmented packets return; - // FIXME filter on dest ip addr (should be broadcast or for us) + // filter on dest ip addr (should be broadcast or for us) + bool is_bcast = memcmp(ð_hdr->dst, &BCAST_MAC_ADDR, sizeof(BCAST_MAC_ADDR)) == 0; + bool is_my_ip = memcmp(&ip->dest, &_local_ip_addr, sizeof(_local_ip_addr)) == 0; + if (!is_bcast && !is_my_ip) return; arp_cache_update(&ip->src, (eth_mac_addr_t *)(((char *)p)+8)); diff --git a/firmware/microblaze/lib/net_common.h b/firmware/microblaze/lib/net_common.h index 3040e5ef3..4004ca6e6 100644 --- a/firmware/microblaze/lib/net_common.h +++ b/firmware/microblaze/lib/net_common.h @@ -20,25 +20,20 @@ #include <stdint.h> #include <stddef.h> -#include <dbsm.h> #include <net/socket_address.h> #include <net/eth_mac_addr.h> -#define CPU_TX_BUF 7 // cpu -> eth - -extern int cpu_tx_buf_dest_port; - -// If this is non-zero, this dbsm could be writing to the ethernet -extern dbsm_t *ac_could_be_sending_to_eth; - -void stop_streaming(void); +/* + * 1's complement sum for IP and UDP headers + * + * init chksum to zero to start. + */ +unsigned int CHKSUM(unsigned int x, unsigned int *chksum); typedef void (*udp_receiver_t)(struct socket_address src, struct socket_address dst, unsigned char *payload, int payload_len); -void register_mac_addr(const eth_mac_addr_t *mac_addr); - -void register_ip_addr(const struct ip_addr *ip_addr); +void register_addrs(const eth_mac_addr_t *mac_addr, const struct ip_addr *ip_addr); void register_udp_listener(int port, udp_receiver_t rcvr); diff --git a/firmware/microblaze/lib/nonstdio.h b/firmware/microblaze/lib/nonstdio.h index 62ebfa46d..6aca7ed9a 100644 --- a/firmware/microblaze/lib/nonstdio.h +++ b/firmware/microblaze/lib/nonstdio.h @@ -45,4 +45,6 @@ void print_buffer(uint32_t *buf, size_t n); //char *itoa(signed long value, char *result, int base); //void reverse(char s[]); +void print_ip_addr(const void *t); + #endif /* INCLUDED_NONSTDIO_H */ diff --git a/firmware/microblaze/lib/pic.c b/firmware/microblaze/lib/pic.c index 226da5f85..b8beda311 100644 --- a/firmware/microblaze/lib/pic.c +++ b/firmware/microblaze/lib/pic.c @@ -54,7 +54,8 @@ pic_init(void) * system interrupt handler with the appropriate prologue and * epilogue. */ -void pic_interrupt_handler() __attribute__ ((interrupt_handler)); +//FIXME zpu-gcc does not install interrupt_handler like this +//void pic_interrupt_handler() __attribute__ ((interrupt_handler)); void pic_interrupt_handler() { diff --git a/firmware/microblaze/lib/pic.h b/firmware/microblaze/lib/pic.h index 68918f9ad..6cbffb441 100644 --- a/firmware/microblaze/lib/pic.h +++ b/firmware/microblaze/lib/pic.h @@ -31,5 +31,6 @@ int pic_disable_interrupts(); int pic_enable_interrupts(); void pic_restore_interrupts(int prev_status); +void pic_interrupt_handler(); #endif /* INCLUDED_PIC_H */ diff --git a/firmware/microblaze/lib/pkt_ctrl.c b/firmware/microblaze/lib/pkt_ctrl.c new file mode 100644 index 000000000..7e095ec00 --- /dev/null +++ b/firmware/microblaze/lib/pkt_ctrl.c @@ -0,0 +1,69 @@ +/* + * Copyright 2010 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "pkt_ctrl.h" +#include "memory_map.h" +#include <nonstdio.h> + +void pkt_ctrl_program_inspector( + const struct ip_addr *ip_addr, uint16_t ctrl_port, uint16_t data_port +){ + buffer_pool_ctrl->ip_addr = ip_addr->addr; + buffer_pool_ctrl->ctrl_ports = ctrl_port; + buffer_pool_ctrl->data_ports = data_port; +} + +void pkt_ctrl_set_routing_mode(pkt_ctrl_routing_mode_t mode){ + switch(mode){ + case PKT_CTRL_ROUTING_MODE_SLAVE: + buffer_pool_ctrl->misc_ctrl = 0; + break; + case PKT_CTRL_ROUTING_MODE_MASTER: + buffer_pool_ctrl->misc_ctrl = 1; + break; + } +} + +static inline bool is_status_bit_set(int bit){ + return buffer_pool_status->status & (1 << bit); +} + +#define CPU_OUT_HS_BIT 0 //from packet router to CPU +#define CPU_INP_HS_BIT 1 //from CPU to packet router + +void *pkt_ctrl_claim_incoming_buffer(size_t *num_lines){ + if (!is_status_bit_set(CPU_OUT_HS_BIT)) return NULL; + *num_lines = (buffer_pool_status->status >> 16) & 0xffff; + return buffer_ram(0); +} + +void pkt_ctrl_release_incoming_buffer(void){ + buffer_pool_ctrl->cpu_out_ctrl = 1; + while (is_status_bit_set(CPU_OUT_HS_BIT)){} + buffer_pool_ctrl->cpu_out_ctrl = 0; +} + +void *pkt_ctrl_claim_outgoing_buffer(void){ + while (!is_status_bit_set(CPU_INP_HS_BIT)){} + return buffer_ram(1); +} + +void pkt_ctrl_commit_outgoing_buffer(size_t num_lines){ + buffer_pool_ctrl->cpu_inp_ctrl = ((num_lines & 0xffff) << 16) | 1; + while (is_status_bit_set(CPU_INP_HS_BIT)){} + buffer_pool_ctrl->cpu_inp_ctrl = 0; +} diff --git a/firmware/microblaze/lib/pkt_ctrl.h b/firmware/microblaze/lib/pkt_ctrl.h new file mode 100644 index 000000000..346e22094 --- /dev/null +++ b/firmware/microblaze/lib/pkt_ctrl.h @@ -0,0 +1,63 @@ +/* + * Copyright 2010 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_PKT_CTRL_H +#define INCLUDED_PKT_CTRL_H + +#include <stddef.h> +#include <stdint.h> +#include <stdbool.h> +#include <lwip/ip_addr.h> + +typedef enum { + PKT_CTRL_ROUTING_MODE_SLAVE, + PKT_CTRL_ROUTING_MODE_MASTER, +} pkt_ctrl_routing_mode_t; + +//! Program the decision values into the packet inspector +void pkt_ctrl_program_inspector( + const struct ip_addr *ip_addr, uint16_t ctrl_port, uint16_t data_port +); + +//! Set the routing mode for this device +void pkt_ctrl_set_routing_mode(pkt_ctrl_routing_mode_t mode); + +/*! + * Try to claim an incomming buffer. + * \param num_lines filled with the buffer size + * \return a pointer to the buffer memory or NULL + */ +void *pkt_ctrl_claim_incoming_buffer(size_t *num_lines); + +/*! + * Release the incoming buffer. Call when done. + */ +void pkt_ctrl_release_incoming_buffer(void); + +/*! + * Claim an outgoing buffer. + * \return a pointer to the buffer + */ +void *pkt_ctrl_claim_outgoing_buffer(void); + +/*! + * Commit the outgoing buffer. + * \param num_lines how many lines written. + */ +void pkt_ctrl_commit_outgoing_buffer(size_t num_lines); + +#endif /* INCLUDED_PKT_CTRL_H */ diff --git a/firmware/microblaze/lib/print_mac_addr.c b/firmware/microblaze/lib/print_addrs.c index 475082325..29601c47c 100644 --- a/firmware/microblaze/lib/print_mac_addr.c +++ b/firmware/microblaze/lib/print_addrs.c @@ -26,3 +26,7 @@ print_mac_addr(const unsigned char addr[6]) } } +void print_ip_addr(const void *t){ + uint8_t *p = (uint8_t *)t; + printf("%d.%d.%d.%d", p[0], p[1], p[2], p[3]); +} diff --git a/firmware/microblaze/lib/spi.c b/firmware/microblaze/lib/spi.c index 2a41a1bfa..af0d8a68f 100644 --- a/firmware/microblaze/lib/spi.c +++ b/firmware/microblaze/lib/spi.c @@ -20,9 +20,9 @@ #include "pic.h" #include "nonstdio.h" -void (*volatile spi_callback)(void); //SPI callback when xfer complete. +//void (*volatile spi_callback)(void); //SPI callback when xfer complete. -static void spi_irq_handler(unsigned irq); +//static void spi_irq_handler(unsigned irq); void spi_init(void) @@ -66,6 +66,7 @@ spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags return 0; } +/* void spi_register_callback(void (*volatile callback)(void)) { spi_callback = callback; } @@ -106,3 +107,4 @@ spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (* return true; } +*/ diff --git a/firmware/microblaze/lib/spi.h b/firmware/microblaze/lib/spi.h index 54618cedd..71245150a 100644 --- a/firmware/microblaze/lib/spi.h +++ b/firmware/microblaze/lib/spi.h @@ -48,12 +48,12 @@ void spi_wait(void); uint32_t spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags); -uint32_t spi_get_data(void); +//uint32_t spi_get_data(void); //static void spi_irq_handler(unsigned irq); -void spi_register_callback(void (*volatile callback)(void)); +//void spi_register_callback(void (*volatile callback)(void)); -bool -spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void)); +//bool +//spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void)); // ---------------------------------------------------------------- // Routines that manipulate the FLASH SPI BUS diff --git a/firmware/microblaze/lib/u2_init.c b/firmware/microblaze/lib/u2_init.c index 4a553a713..191a0e816 100644 --- a/firmware/microblaze/lib/u2_init.c +++ b/firmware/microblaze/lib/u2_init.c @@ -20,25 +20,13 @@ #include "spi.h" #include "pic.h" #include "hal_io.h" -#include "buffer_pool.h" #include "hal_uart.h" #include "i2c.h" -#include "i2c_async.h" #include "mdelay.h" #include "clocks.h" #include "usrp2/fw_common.h" #include "nonstdio.h" -unsigned char u2_hw_rev_major; -unsigned char u2_hw_rev_minor; - -static inline void -get_hw_rev(void) -{ - bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_REV, &u2_hw_rev_minor, 1); - ok &= eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_REV+1, &u2_hw_rev_major, 1); -} - /* * We ought to arrange for this to be called before main, but for now, * we require that the user's main call u2_init as the first thing... @@ -60,13 +48,8 @@ u2_init(void) // init i2c so we can read our rev pic_init(); // progammable interrupt controller i2c_init(); - i2c_register_handler(); //for using async I2C hal_enable_ints(); - bp_init(); // buffer pool - - - // flash all leds to let us know board is alive hal_set_leds(0x0, 0x1f); mdelay(100); @@ -85,6 +68,8 @@ u2_init(void) printf("ad9510 reg[0x%x] = 0x%x\n", rr, vv); } #endif - + + output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN); + return true; } diff --git a/firmware/microblaze/lib/usrp2_bytesex.h b/firmware/microblaze/lib/usrp2_bytesex.h deleted file mode 100644 index 2b74f2a0b..000000000 --- a/firmware/microblaze/lib/usrp2_bytesex.h +++ /dev/null @@ -1,66 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef INCLUDED_USRP2_BYTESEX_H -#define INCLUDED_USRP2_BYTESEX_H - -// The USRP2 speaks big-endian... -// Use the standard include files or provide substitutions for -// htons and friends - -#if defined(HAVE_ARPA_INET_H) -#include <arpa/inet.h> -#elif defined(HAVE_NETINET_IN_H) -#include <netinet/in.h> -#else -#include <stdint.h> - -#ifdef WORDS_BIGENDIAN // nothing to do... - -static inline uint32_t htonl(uint32_t x){ return x; } -static inline uint16_t htons(uint16_t x){ return x; } -static inline uint32_t ntohl(uint32_t x){ return x; } -static inline uint16_t ntohs(uint16_t x){ return x; } - -#else - -#ifdef HAVE_BYTESWAP_H -#include <byteswap.h> -#else - -static inline uint16_t -bswap_16 (uint16_t x) -{ - return ((((x) >> 8) & 0xff) | (((x) & 0xff) << 8)); -} - -static inline uint32_t -bswap_32 (uint32_t x) -{ - return ((((x) & 0xff000000) >> 24) | (((x) & 0x00ff0000) >> 8) \ - | (((x) & 0x0000ff00) << 8) | (((x) & 0x000000ff) << 24)); -} -#endif - -static inline uint32_t htonl(uint32_t x){ return bswap_32(x); } -static inline uint16_t htons(uint16_t x){ return bswap_16(x); } -static inline uint32_t ntohl(uint32_t x){ return bswap_32(x); } -static inline uint16_t ntohs(uint16_t x){ return bswap_16(x); } - -#endif -#endif -#endif /* INCLUDED_USRP2_BYTESEX_H */ diff --git a/firmware/microblaze/lib/wb16550.h b/firmware/microblaze/lib/wb16550.h deleted file mode 100644 index 7522f4438..000000000 --- a/firmware/microblaze/lib/wb16550.h +++ /dev/null @@ -1,98 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - - -// Wishbone National Semiconductor 16550A compatible UART - -#ifndef INCLUDED_WB16550_H -#define INCLUDED_WB16550_H - -#include <stdint.h> - -typedef struct { - volatile uint8_t data; // 0 r/w: r: rx fifo, w: tx fifo (if DLAB: LSB of divisor) - volatile uint8_t ier; // 1 r/w: Interrupt Enable Register (if DLAB: MSB of divisor) - volatile uint8_t iir_fcr; // 2 r/w: r: Interrupt ID Register, - // w: Fifo Control Register - volatile uint8_t lcr; // 3 r/w: Line Control Register - volatile uint8_t mcr; // 4 w: Modem Control Register - volatile uint8_t lsr; // 5 r: Line Status Register - volatile uint8_t msr; // 6 r: Modem Status Register - -} wb16550_reg_t; - -#define UART_IER_RDI 0x01 // Enable received data interrupt -#define UART_IER_THRI 0x02 // Enable transmitter holding reg empty int. -#define UART_IER_RLSI 0x04 // Enable receiver line status interrupt -#define UART_IER_MSI 0x08 // Enable modem status interrupt - -#define UART_IIR_NO_INT 0x01 // No interrupts pending -#define UART_IIR_ID_MASK 0x06 // Mask for interrupt ID -#define UART_IIR_MSI 0x00 // Modem status interrupt -#define UART_IIR_THRI 0x02 // Tx holding register empty int -#define UART_IIR_RDI 0x04 // Rx data available int -#define UART_IIR_RLSI 0x06 // Receiver line status int - -#define UART_FCR_ENABLE_FIFO 0x01 // ignore, always enabled -#define UART_FCR_CLEAR_RCVR 0x02 // Clear the RCVR FIFO -#define UART_FCR_CLEAR_XMIT 0x04 // Clear the XMIT FIFO -#define UART_FCR_TRIGGER_MASK 0xC0 // Mask for FIFO trigger range -#define UART_FCR_TRIGGER_1 0x00 // Rx fifo trigger level: 1 byte -#define UART_FCR_TRIGGER_4 0x40 // Rx fifo trigger level: 4 bytes -#define UART_FCR_TRIGGER_8 0x80 // Rx fifo trigger level: 8 bytes -#define UART_FCR_TRIGGER_14 0xC0 // Rx fifo trigger level: 14 bytes - -#define UART_LCR_DLAB 0x80 // Divisor latch access bit -#define UART_LCR_SBC 0x40 // Set break control -#define UART_LCR_SPAR 0x20 // Stick parity -#define UART_LCR_EPAR 0x10 // Even parity select -#define UART_LCR_PARITY 0x08 // Parity Enable -#define UART_LCR_STOP 0x04 // Stop bits: 0=1 bit, 1=2 bits -#define UART_LCR_WLEN5 0x00 // Wordlength: 5 bits -#define UART_LCR_WLEN6 0x01 // Wordlength: 6 bits -#define UART_LCR_WLEN7 0x02 // Wordlength: 7 bits -#define UART_LCR_WLEN8 0x03 // Wordlength: 8 bits - -#define UART_MCR_LOOP 0x10 // Enable loopback test mode -#define UART_MCR_OUT2n 0x08 // Out2 complement (loopback mode) -#define UART_MCR_OUT1n 0x04 // Out1 complement (loopback mode) -#define UART_MCR_RTSn 0x02 // RTS complement -#define UART_MCR_DTRn 0x01 // DTR complement - -#define UART_LSR_TEMT 0x40 // Transmitter empty -#define UART_LSR_THRE 0x20 // Transmit-hold-register empty -#define UART_LSR_BI 0x10 // Break interrupt indicator -#define UART_LSR_FE 0x08 // Frame error indicator -#define UART_LSR_PE 0x04 // Parity error indicator -#define UART_LSR_OE 0x02 // Overrun error indicator -#define UART_LSR_DR 0x01 // Receiver data ready -#define UART_LSR_BRK_ERROR_BITS 0x1E // BI, FE, PE, OE bits -#define UART_LSR_ERROR 0x80 // At least 1 PE, FE or BI are in the fifo - -#define UART_MSR_DCD 0x80 // Data Carrier Detect -#define UART_MSR_RI 0x40 // Ring Indicator -#define UART_MSR_DSR 0x20 // Data Set Ready -#define UART_MSR_CTS 0x10 // Clear to Send -#define UART_MSR_DDCD 0x08 // Delta DCD -#define UART_MSR_TERI 0x04 // Trailing edge ring indicator -#define UART_MSR_DDSR 0x02 // Delta DSR -#define UART_MSR_DCTS 0x01 // Delta CTS -#define UART_MSR_ANY_DELTA 0x0F // Any of the delta bits! - - -#endif // INCLUDED_WB16550_H diff --git a/firmware/microblaze/u2_flash_tool b/firmware/microblaze/u2_flash_tool deleted file mode 100755 index 2b66a4ac0..000000000 --- a/firmware/microblaze/u2_flash_tool +++ /dev/null @@ -1,116 +0,0 @@ -#!/usr/bin/env python - -import sys -from optparse import OptionParser - -SECTOR_SIZE = 512 # bytes -MAX_FILE_SIZE = 1 * (2**20) # maximum number of bytes we'll burn to a slot - -FPGA_OFFSET = 0 # offset in flash to fpga image -FIRMWARE_OFFSET = 1 * (2**20) # offset in flash to firmware image - -def read_file_data(filename): - f = open(filename, "rb") - file_data = f.read(MAX_FILE_SIZE) - t = len(file_data) % SECTOR_SIZE - if t != 0: - file_data += (SECTOR_SIZE - t)*chr(0) # pad to an even sector size w/ zeros - return file_data - - -def write_flash(offset, filename, devname): - file_data = read_file_data(filename) - dev = open(devname, "wb") - dev.seek(offset, 0) # seek to absolute byte offset - dev.write(file_data) - dev.flush() - dev.close() - return True - - -def verify_flash(offset, filename, devname): - file_data = read_file_data(filename) - dev = open(devname, "rb") - dev.seek(offset, 0) # seek to absolute byte offset - dev_data = dev.read(len(file_data)) - if len(dev_data) != len(file_data): - sys.stderr.write("short read on device %s\n" % (devname,)) - return False - - if file_data == dev_data: - return True - - # doesn't match - nwrong = 0 - for i in range(len(file_data)): - if dev_data[i] != file_data[i]: - sys.stderr.write("mismatch at offset %7d. Expected 0x%02x, got 0x%02x\n" % ( - i, ord(file_data[i]), ord(dev_data[i]))) - nwrong += 1 - if nwrong > 16: - sys.stderr.write("> 16 errors, stopping comparison\n") - break - return False - -def read_flash(offset, filename, devname): - dev = open(devname, "rb") - dev.seek(offset, 0) # seek to absolute byte offset - dev_data = dev.read(MAX_FILE_SIZE) - dev.close() - open(filename, "wb").write(dev_data) - - -def main(): - parser = OptionParser(usage="%prog: [options] filename") - parser.add_option("-w", "--write", action="store_const", const="write", dest="mode", - help="write FILE to TARGET slot") - parser.add_option("-v", "--verify", action="store_const", const="verify", dest="mode", - help="verify FILE against TARGET slot") - parser.add_option("-r", "--read", action="store_const", const="read", dest="mode", - help="read TARGET slot, write to FILE") - parser.add_option("-t", "--target", type="choice", choices=("fpga", "s/w"), default="s/w", - help="select TARGET slot from: fpga, s/w [default=%default]") - parser.add_option("", "--dev", default=None, - help="specify flash device file, e.g., /dev/sdb. Be careful!") - parser.set_defaults(target="s/w", mode=None) - - (options, args) = parser.parse_args() - if len(args) != 1: - parser.print_help() - raise SystemExit - - filename = args[0] - - if options.mode is None: - sys.stderr.write("specify mode with -w, -v or -r\n") - parser.print_help() - raise SystemExit - - if options.dev is None: - sys.stderr.write("specify the device file with --dev\n") - parser.print_help() - raise SystemExit - - offset = { "fpga" : FPGA_OFFSET, "s/w" : FIRMWARE_OFFSET }[options.target] - - if options.mode == "write": - r = (write_flash(offset, filename, options.dev) - and verify_flash(offset, filename, options.dev)) - elif options.mode == "verify": - r = verify_flash(offset, filename, options.dev) - elif options.mode == "read": - r = read_flash(offset, filename, options.dev) - else: - raise NotImplemented - - if not r: - raise SystemExit, 1 - - -if __name__ == "__main__": - main() - - - - - diff --git a/firmware/microblaze/usrp2/.gitignore b/firmware/microblaze/usrp2/.gitignore deleted file mode 100644 index 18f715618..000000000 --- a/firmware/microblaze/usrp2/.gitignore +++ /dev/null @@ -1,9 +0,0 @@ -/Makefile -/Makefile.in -/*.a -/*.bin -/*.dump -/*.ihx -/*.elf -/*.rom -/*.map diff --git a/firmware/microblaze/usrp2/Makefile.am b/firmware/microblaze/usrp2/CMakeLists.txt index 7a58e7253..8ed31b8d4 100644 --- a/firmware/microblaze/usrp2/Makefile.am +++ b/firmware/microblaze/usrp2/CMakeLists.txt @@ -15,33 +15,22 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. # -include $(top_srcdir)/Makefile.common - -AM_CFLAGS = \ - $(COMMON_CFLAGS) - -AM_LDFLAGS = \ - $(COMMON_LFLAGS) \ - -Wl,-defsym -Wl,_TEXT_START_ADDR=0x0050 \ - -Wl,-defsym -Wl,_STACK_SIZE=3072 - -LDADD = libusrp2.a - -LDADD = libusrp2.a - -######################################################################## -# USRP2 specific library and programs ######################################################################## -noinst_LIBRARIES = libusrp2.a +INCLUDE(${CMAKE_SOURCE_DIR}/lib/CMakeLists.txt) +INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) -libusrp2_a_SOURCES = \ - $(COMMON_SRCS) \ - sd.c \ - ethernet.c \ - udp_fw_update.c +ADD_LIBRARY(libusrp2fw STATIC + ${COMMON_SRCS} + sd.c + ethernet.c + udp_fw_update.c +) -noinst_PROGRAMS = \ - usrp2_txrx_uhd.elf +######################################################################## +ADD_EXECUTABLE(usrp2_txrx_uhd.elf ${CMAKE_SOURCE_DIR}/apps/txrx_uhd.c) +TARGET_LINK_LIBRARIES(usrp2_txrx_uhd.elf libusrp2fw) +GEN_OUTPUTS(usrp2_txrx_uhd.elf) -usrp2_txrx_uhd_elf_SOURCES = \ - $(top_srcdir)/apps/txrx_uhd.c +ADD_EXECUTABLE(usrp2_blinkenlights.elf ${CMAKE_SOURCE_DIR}/apps/blinkenlights.c) +TARGET_LINK_LIBRARIES(usrp2_blinkenlights.elf libusrp2fw) +GEN_OUTPUTS(usrp2_blinkenlights.elf) diff --git a/firmware/microblaze/usrp2/memory_map.h b/firmware/microblaze/usrp2/memory_map.h index eac0c217f..23d96389f 100644 --- a/firmware/microblaze/usrp2/memory_map.h +++ b/firmware/microblaze/usrp2/memory_map.h @@ -53,9 +53,7 @@ #define BUFFER_POOL_RAM_BASE 0x8000 -#define NBUFFERS 8 #define BP_NLINES 0x0200 // number of 32-bit lines in a buffer -#define BP_LAST_LINE (BP_NLINES - 1) // last line in a buffer #define buffer_pool_ram \ ((uint32_t *) BUFFER_POOL_RAM_BASE) @@ -173,8 +171,8 @@ typedef struct { #define BUFFER_POOL_STATUS_BASE 0xCC00 typedef struct { - volatile uint32_t last_line[NBUFFERS]; // last line xfer'd in buffer - volatile uint32_t status; // error and done flags + volatile uint32_t _padding[8]; + volatile uint32_t status; volatile uint32_t hw_config; // see below volatile uint32_t dummy[3]; volatile uint32_t irqs; @@ -184,74 +182,6 @@ typedef struct { #define buffer_pool_status ((buffer_pool_status_t *) BUFFER_POOL_STATUS_BASE) -/* - * Buffer n's xfer is done. - * Clear this bit by issuing bp_clear_buf(n) - */ -#define BPS_DONE(n) (0x00000001 << (n)) -#define BPS_DONE_0 BPS_DONE(0) -#define BPS_DONE_1 BPS_DONE(1) -#define BPS_DONE_2 BPS_DONE(2) -#define BPS_DONE_3 BPS_DONE(3) -#define BPS_DONE_4 BPS_DONE(4) -#define BPS_DONE_5 BPS_DONE(5) -#define BPS_DONE_6 BPS_DONE(6) -#define BPS_DONE_7 BPS_DONE(7) - -/* - * Buffer n's xfer had an error. - * Clear this bit by issuing bp_clear_buf(n) - */ -#define BPS_ERROR(n) (0x00000100 << (n)) -#define BPS_ERROR_0 BPS_ERROR(0) -#define BPS_ERROR_1 BPS_ERROR(1) -#define BPS_ERROR_2 BPS_ERROR(2) -#define BPS_ERROR_3 BPS_ERROR(3) -#define BPS_ERROR_4 BPS_ERROR(4) -#define BPS_ERROR_5 BPS_ERROR(5) -#define BPS_ERROR_6 BPS_ERROR(6) -#define BPS_ERROR_7 BPS_ERROR(7) - -/* - * Buffer n is idle. A buffer is idle if it's not - * DONE, ERROR, or processing a transaction. If it's - * IDLE, it's safe to start a new transaction. - * - * Clear this bit by starting a xfer with - * bp_send_from_buf or bp_receive_to_buf. - */ -#define BPS_IDLE(n) (0x00010000 << (n)) -#define BPS_IDLE_0 BPS_IDLE(0) -#define BPS_IDLE_1 BPS_IDLE(1) -#define BPS_IDLE_2 BPS_IDLE(2) -#define BPS_IDLE_3 BPS_IDLE(3) -#define BPS_IDLE_4 BPS_IDLE(4) -#define BPS_IDLE_5 BPS_IDLE(5) -#define BPS_IDLE_6 BPS_IDLE(6) -#define BPS_IDLE_7 BPS_IDLE(7) - -/* - * Buffer n has a "slow path" packet in it. - * This bit is orthogonal to the bits above and indicates that - * the FPGA ethernet rx protocol engine has identified this packet - * as one requiring firmware intervention. - */ -#define BPS_SLOWPATH(n) (0x01000000 << (n)) -#define BPS_SLOWPATH_0 BPS_SLOWPATH(0) -#define BPS_SLOWPATH_1 BPS_SLOWPATH(1) -#define BPS_SLOWPATH_2 BPS_SLOWPATH(2) -#define BPS_SLOWPATH_3 BPS_SLOWPATH(3) -#define BPS_SLOWPATH_4 BPS_SLOWPATH(4) -#define BPS_SLOWPATH_5 BPS_SLOWPATH(5) -#define BPS_SLOWPATH_6 BPS_SLOWPATH(6) -#define BPS_SLOWPATH_7 BPS_SLOWPATH(7) - - -#define BPS_DONE_ALL 0x000000ff // mask of all dones -#define BPS_ERROR_ALL 0x0000ff00 // mask of all errors -#define BPS_IDLE_ALL 0x00ff0000 // mask of all idles -#define BPS_SLOWPATH_ALL 0xff000000 // mask of all slowpaths - // The hw_config register #define HWC_SIMULATION 0x80000000 @@ -316,49 +246,14 @@ hwconfig_wishbone_divisor(void) // --- buffer pool control regs --- typedef struct { - volatile uint32_t ctrl; + volatile uint32_t misc_ctrl; + volatile uint32_t ip_addr; + volatile uint32_t ctrl_ports; //ctrl (low 16) other (high 16) + volatile uint32_t data_ports; //dsp0 (low 16) dsp1 (high 16) + volatile uint32_t cpu_out_ctrl; + volatile uint32_t cpu_inp_ctrl; } buffer_pool_ctrl_t; -// buffer pool ports - -#define PORT_SERDES 0 // serial/deserializer -#define PORT_DSP 1 // DSP tx or rx pipeline -#define PORT_ETH 2 // ethernet tx or rx -#define PORT_RAM 3 // RAM tx or rx - -// the buffer pool ctrl register fields - -#define BPC_BUFFER(n) (((n) & 0xf) << 28) -#define BPC_BUFFER_MASK BPC_BUFFER(~0) -#define BPC_BUFFER_0 BPC_BUFFER(0) -#define BPC_BUFFER_1 BPC_BUFFER(1) -#define BPC_BUFFER_2 BPC_BUFFER(2) -#define BPC_BUFFER_3 BPC_BUFFER(3) -#define BPC_BUFFER_4 BPC_BUFFER(4) -#define BPC_BUFFER_5 BPC_BUFFER(5) -#define BPC_BUFFER_6 BPC_BUFFER(6) -#define BPC_BUFFER_7 BPC_BUFFER(7) -#define BPC_BUFFER_NIL BPC_BUFFER(0x8) // disable - -#define BPC_PORT(n) (((n) & 0x7) << 25) -#define BPC_PORT_MASK BPC_PORT(~0) -#define BPC_PORT_SERDES BPC_PORT(PORT_SERDES) -#define BPC_PORT_DSP BPC_PORT(PORT_DSP) -#define BPC_PORT_ETH BPC_PORT(PORT_ETH) -#define BPC_PORT_RAM BPC_PORT(PORT_RAM) -#define BPC_PORT_NIL BPC_PORT(0x4) // disable - -#define BPC_CLR (1 << 24) // mutually excl commands -#define BPC_READ (1 << 23) -#define BPC_WRITE (1 << 22) - -#define BPC_STEP(step) (((step) & 0xf) << 18) -#define BPC_STEP_MASK BPC_STEP(~0) -#define BPC_LAST_LINE(line) (((line) & 0x1ff) << 9) -#define BPC_LAST_LINE_MASK BPC_LAST_LINE(~0) -#define BPC_FIRST_LINE(line) (((line) & 0x1ff) << 0) -#define BPC_FIRST_LINE_MASK BPC_FIRST_LINE(~0) - #define buffer_pool_ctrl ((buffer_pool_ctrl_t *) BUFFER_POOL_CTRL_BASE) // --- misc outputs --- diff --git a/firmware/microblaze/usrp2p/.gitignore b/firmware/microblaze/usrp2p/.gitignore deleted file mode 100644 index 18f715618..000000000 --- a/firmware/microblaze/usrp2p/.gitignore +++ /dev/null @@ -1,9 +0,0 @@ -/Makefile -/Makefile.in -/*.a -/*.bin -/*.dump -/*.ihx -/*.elf -/*.rom -/*.map diff --git a/firmware/microblaze/usrp2p/CMakeLists.txt b/firmware/microblaze/usrp2p/CMakeLists.txt new file mode 100644 index 000000000..41ef8f1dd --- /dev/null +++ b/firmware/microblaze/usrp2p/CMakeLists.txt @@ -0,0 +1,48 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +INCLUDE(${CMAKE_SOURCE_DIR}/lib/CMakeLists.txt) +INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) + +ADD_DEFINITIONS(-DUSRP2P) + +ADD_LIBRARY(libusrp2pfw STATIC + ${COMMON_SRCS} + spif.c + spi_flash.c + spi_flash_read.c + bootloader_utils.c + ethernet.c + xilinx_s3_icap.c + udp_fw_update.c +) + +ADD_SUBDIRECTORY(bootloader) + +######################################################################## +ADD_EXECUTABLE(usrp2p_txrx_uhd.elf ${CMAKE_SOURCE_DIR}/apps/txrx_uhd.c) +TARGET_LINK_LIBRARIES(usrp2p_txrx_uhd.elf libusrp2pfw) +GEN_OUTPUTS(usrp2p_txrx_uhd.elf) + +ADD_EXECUTABLE(usrp2p_blinkenlights.elf ${CMAKE_SOURCE_DIR}/apps/blinkenlights.c) +TARGET_LINK_LIBRARIES(usrp2p_blinkenlights.elf libusrp2pfw) +GEN_OUTPUTS(usrp2p_blinkenlights.elf) + +ADD_EXECUTABLE(usrp2p_uart_flash_loader.elf ${CMAKE_SOURCE_DIR}/apps/uart_flash_loader.c) +TARGET_LINK_LIBRARIES(usrp2p_uart_flash_loader.elf libusrp2pfw) +GEN_OUTPUTS(usrp2p_uart_flash_loader.elf) diff --git a/firmware/microblaze/usrp2p/bootloader/.gitignore b/firmware/microblaze/usrp2p/bootloader/.gitignore deleted file mode 100644 index 17b0f82f3..000000000 --- a/firmware/microblaze/usrp2p/bootloader/.gitignore +++ /dev/null @@ -1,11 +0,0 @@ -/*.ihx -/*.rmi -/*_rom -/*.elf -/*.bin -/*.dump -/*.log -/*.rom -/*.map -/Makefile -/Makefile.in diff --git a/firmware/microblaze/usrp2p/bootloader/CMakeLists.txt b/firmware/microblaze/usrp2p/bootloader/CMakeLists.txt new file mode 100644 index 000000000..41c86cc9a --- /dev/null +++ b/firmware/microblaze/usrp2p/bootloader/CMakeLists.txt @@ -0,0 +1,39 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +INCLUDE(FindPythonInterp) + +MACRO(GEN_RMI target) + GET_FILENAME_COMPONENT(name ${target} NAME_WE) + #command to create a rmi from elf + ADD_CUSTOM_COMMAND( + OUTPUT ${name}.rmi DEPENDS ${name}.bin + COMMAND ${PYTHON_EXECUTABLE} + ARGS ${CMAKE_SOURCE_DIR}/bin/bin_to_ram_macro_init.py ${name}.bin ${name}.rmi + ) + #add a top level target for output files + ADD_CUSTOM_TARGET( + ${name}_rmi ALL DEPENDS ${name}.rmi + ) +ENDMACRO(GEN_RMI) + +######################################################################## +ADD_EXECUTABLE(init_bootloader.elf init_bootloader.c) +TARGET_LINK_LIBRARIES(init_bootloader.elf libusrp2pfw) +GEN_OUTPUTS(init_bootloader.elf) +GEN_RMI(init_bootloader.bin) diff --git a/firmware/microblaze/usrp2p/bootloader/init_bootloader.c b/firmware/microblaze/usrp2p/bootloader/init_bootloader.c index 1d9d681d7..cfa80ffea 100644 --- a/firmware/microblaze/usrp2p/bootloader/init_bootloader.c +++ b/firmware/microblaze/usrp2p/bootloader/init_bootloader.c @@ -18,7 +18,7 @@ #include <i2c.h> #include "usrp2/fw_common.h" -void pic_interrupt_handler() __attribute__ ((interrupt_handler)); +//void pic_interrupt_handler() __attribute__ ((interrupt_handler)); void pic_interrupt_handler() { @@ -42,7 +42,7 @@ void load_ihex(void) { //simple IHEX parser to load proper records into RAM. loa } else if(ihex_record.type == 1) { //end of record puts("OK"); //load main firmware - start_program(RAM_BASE); + start_program(); puts("ERROR: main image returned! Back in IHEX load mode."); } else puts("NOK"); //RAM loads do not support extended segment address records (04) -- upper 16 bits are always "0". } else puts("NOK"); @@ -56,12 +56,12 @@ void delay(uint32_t t) { int main(int argc, char *argv[]) { hal_disable_ints(); // In case we got here via jmp 0x0 output_regs->leds = 0xFF; - delay(500000); + delay(5000); output_regs->leds = 0x00; hal_uart_init(); spif_init(); i2c_init(); //for EEPROM - puts("USRP2+ bootloader\n"); + puts("USRP2+ bootloader super ultra ZPU edition\n"); bool production_image = find_safe_booted_flag(); set_safe_booted_flag(0); //haven't booted yet @@ -71,7 +71,7 @@ int main(int argc, char *argv[]) { if(is_valid_fw_image(SAFE_FW_IMAGE_LOCATION_ADDR)) { set_safe_booted_flag(1); //let the firmware know it's the safe image spi_flash_read(SAFE_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE); - start_program(RAM_BASE); + start_program(); puts("ERROR: return from main program! This should never happen!"); icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR); } else { @@ -85,7 +85,7 @@ int main(int argc, char *argv[]) { if(is_valid_fpga_image(PROD_FPGA_IMAGE_LOCATION_ADDR)) { puts("Valid production FPGA image found. Attempting to boot."); set_safe_booted_flag(1); - delay(30000); //so serial output can finish + delay(300); //so serial output can finish icap_reload_fpga(PROD_FPGA_IMAGE_LOCATION_ADDR); } puts("No valid production FPGA image found.\nAttempting to load production firmware..."); @@ -93,17 +93,23 @@ int main(int argc, char *argv[]) { if(is_valid_fw_image(PROD_FW_IMAGE_LOCATION_ADDR)) { puts("Valid production firmware found. Loading..."); spi_flash_read(PROD_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE); - start_program(RAM_BASE); + puts("Finished loading. Starting image."); + delay(300); + start_program(); puts("ERROR: Return from main program! This should never happen!"); //if this happens, though, the safest thing to do is reboot the whole FPGA and start over. + delay(300); icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR); return 1; } puts("No valid production firmware found. Trying safe firmware..."); if(is_valid_fw_image(SAFE_FW_IMAGE_LOCATION_ADDR)) { spi_flash_read(SAFE_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE); - start_program(RAM_BASE); + puts("Finished loading. Starting image."); + delay(300); + start_program(); puts("ERROR: return from main program! This should never happen!"); + delay(300); icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR); return 1; } diff --git a/firmware/microblaze/usrp2p/bootloader_utils.c b/firmware/microblaze/usrp2p/bootloader_utils.c index fadd225bb..379c5f957 100644 --- a/firmware/microblaze/usrp2p/bootloader_utils.c +++ b/firmware/microblaze/usrp2p/bootloader_utils.c @@ -10,30 +10,39 @@ #include <string.h> #include <bootloader_utils.h> #include <spi_flash.h> +#include <memory_map.h> +#include <nonstdio.h> int is_valid_fpga_image(uint32_t addr) { +// printf("is_valid_fpga_image(): starting with addr=%x...\n", addr); uint8_t imgbuf[64]; spi_flash_read(addr, 64, imgbuf); //we're just looking for leading 0xFF padding, followed by the sync bytes 0xAA 0x99 - int i = 0; - for(i; i<63; i++) { + for(size_t i = 0; i<63; i++) { if(imgbuf[i] == 0xFF) continue; - if(imgbuf[i] == 0xAA && imgbuf[i+1] == 0x99) return 1; + if(imgbuf[i] == 0xAA && imgbuf[i+1] == 0x99) { + //printf("is_valid_fpga_image(): found valid FPGA image\n"); + return 1; + } } return 0; } int is_valid_fw_image(uint32_t addr) { - static const uint8_t fwheader[] = {0xB0, 0x00, 0x00, 0x00, 0xB8, 0x08}; //just lookin for a jump to anywhere located at the reset vector + static const uint8_t fwheader[] = {0x0b, 0x0b, 0x0b, 0x0b, 0x80, 0x70}; //just lookin for a jump to anywhere located at the reset vector + //printf("is_valid_fw_image(): starting with addr=%x...\n", addr); uint8_t buf[12]; spi_flash_read(addr, 6, buf); + //printf("is_valid_fw_image(): read "); + //for(int i = 0; i < 5; i++) printf("%x ", buf[i]); + //printf("\n"); return memcmp(buf, fwheader, 6) == 0; } -void start_program(uint32_t addr) +void start_program(void) { - memcpy(0x00000000, addr+0x00000000, 36); //copy the whole vector table, with the reset vector, into boot RAM - typedef void (*fptr_t)(void); - (*(fptr_t) 0x00000000)(); // most likely no return + //ignoring the addr now + //all this does is tap that register + *((volatile uint32_t *) SR_ADDR_BLDRDONE) = 1; } diff --git a/firmware/microblaze/usrp2p/bootloader_utils.h b/firmware/microblaze/usrp2p/bootloader_utils.h index f597c0113..0f49ae6cd 100644 --- a/firmware/microblaze/usrp2p/bootloader_utils.h +++ b/firmware/microblaze/usrp2p/bootloader_utils.h @@ -9,8 +9,8 @@ //we're working in bytes and byte addresses so we can run the same code with Flash chips of different sector sizes. //it's really 1463736, but rounded up to 1.5MB #define FPGA_IMAGE_SIZE_BYTES 1572864 -//instead of 32K, we write 31K because we're using the top 1K for stack space! -#define FW_IMAGE_SIZE_BYTES 31744 +//16K +#define FW_IMAGE_SIZE_BYTES 0x3fff #define SAFE_FPGA_IMAGE_LOCATION_ADDR 0x00000000 #define SAFE_FW_IMAGE_LOCATION_ADDR 0x003F0000 @@ -19,4 +19,4 @@ int is_valid_fpga_image(uint32_t addr); int is_valid_fw_image(uint32_t addr); -void start_program(uint32_t addr); +void start_program(void); diff --git a/firmware/microblaze/usrp2p/ethernet.c b/firmware/microblaze/usrp2p/ethernet.c index 36d6a17ca..03891f959 100644 --- a/firmware/microblaze/usrp2p/ethernet.c +++ b/firmware/microblaze/usrp2p/ethernet.c @@ -279,101 +279,6 @@ ethernet_init(void) eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG); } -static bool -unprogrammed(const void *t, size_t len) -{ - int i; - uint8_t *p = (uint8_t *)t; - bool all_zeros = true; - bool all_ones = true; - for (i = 0; i < len; i++){ - all_zeros &= p[i] == 0x00; - all_ones &= p[i] == 0xff; - } - return all_ones | all_zeros; -} - -//////////////////// MAC Addr Stuff /////////////////////// -/* -static int8_t src_mac_addr_initialized = false; -static eth_mac_addr_t src_mac_addr = {{ - 0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff - }}; - -const eth_mac_addr_t * -ethernet_mac_addr(void) -{ - if (!src_mac_addr_initialized){ // fetch from eeprom - src_mac_addr_initialized = true; - - // if we're simulating, don't read the EEPROM model, it's REALLY slow - if (hwconfig_simulation_p()) - return &src_mac_addr; - - eth_mac_addr_t tmp; - bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, &tmp, sizeof(tmp)); - if (!ok || unprogrammed(&tmp, sizeof(tmp))){ - // use the default - } - else - src_mac_addr = tmp; - } - - return &src_mac_addr; -} - -bool -ethernet_set_mac_addr(const eth_mac_addr_t *t) -{ - bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, t, sizeof(eth_mac_addr_t)); - if (ok){ - src_mac_addr = *t; - src_mac_addr_initialized = true; - //eth_mac_set_addr(t); //this breaks the link - } - - return ok; -} - -//////////////////// IP Addr Stuff /////////////////////// - -static int8_t src_ip_addr_initialized = false; -static struct ip_addr src_ip_addr = { - (192 << 24 | 168 << 16 | 10 << 8 | 2 << 0) -}; - - -const struct ip_addr *get_ip_addr(void) -{ - if (!src_ip_addr_initialized){ // fetch from eeprom - src_ip_addr_initialized = true; - - // if we're simulating, don't read the EEPROM model, it's REALLY slow - if (hwconfig_simulation_p()) - return &src_ip_addr; - - struct ip_addr tmp; - bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, &tmp, sizeof(tmp)); - if (!ok || unprogrammed(&tmp, sizeof(tmp))){ - // use the default - } - else - src_ip_addr = tmp; - } - - return &src_ip_addr; -} - -bool set_ip_addr(const struct ip_addr *t){ - bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, t, sizeof(struct ip_addr)); - if (ok){ - src_ip_addr = *t; - src_ip_addr_initialized = true; - } - - return ok; -} -*/ int ethernet_check_errors(void) { diff --git a/firmware/microblaze/usrp2p/memory_map.h b/firmware/microblaze/usrp2p/memory_map.h index 3b2dc0057..2b5ae57be 100644 --- a/firmware/microblaze/usrp2p/memory_map.h +++ b/firmware/microblaze/usrp2p/memory_map.h @@ -16,38 +16,6 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/* Overall Memory Map - * 0000-FFFF 64K RAM space - * - * 0000-1FFF 8K Boot RAM - * 2000-5FFF 16K Buffer pool - * 6000-7FFF 8K Peripherals - * 8000-FFFF 32K Main System RAM - - -From u2plus_core.v: -wb_1master #(.decode_w(8), -.s0_addr(8'b0000_0000),.s0_mask(8'b1110_0000), // 0-8K, Boot RAM -.s1_addr(8'b0100_0000),.s1_mask(8'b1100_0000), // 16K-32K, Buffer Pool -.s2_addr(8'b0011_0000),.s2_mask(8'b1111_1111), // SPI 0x3000 -.s3_addr(8'b0011_0001),.s3_mask(8'b1111_1111), // I2C 0x3100 -.s4_addr(8'b0011_0010),.s4_mask(8'b1111_1111), // GPIO 0x3200 -.s5_addr(8'b0011_0011),.s5_mask(8'b1111_1111), // Readback 0x3300 -.s6_addr(8'b0011_0100),.s6_mask(8'b1111_1111), // Ethernet MAC 0x3400 -.s7_addr(8'b0010_0000),.s7_mask(8'b1111_0000), // 8-12K, Settings Bus (only uses 1K) 0x2000-0x2FFF -.s8_addr(8'b0011_0101),.s8_mask(8'b1111_1111), // PIC 0x3500 -.s9_addr(8'b0011_0110),.s9_mask(8'b1111_1111), // Unused 0x3600 -.sa_addr(8'b0011_0111),.sa_mask(8'b1111_1111), // UART 0x3700 -.sb_addr(8'b0011_1000),.sb_mask(8'b1111_1111), // ATR 0x3800 -.sc_addr(8'b0011_1001),.sc_mask(8'b1111_1111), // Unused 0x3900 -.sd_addr(8'b0011_1010),.sd_mask(8'b1111_1111), // ICAP 0x3A00 -.se_addr(8'b0011_1011),.se_mask(8'b1111_1111), // SPI Flash 0x3B00 -.sf_addr(8'b1000_0000),.sf_mask(8'b1000_0000), // 32-64K, Main RAM 0x8000-0xFFFF - .dw(dw),.aw(aw),.sw(sw)) wb_1master - - */ - - #ifndef INCLUDED_MEMORY_MAP_H #define INCLUDED_MEMORY_MAP_H @@ -78,9 +46,7 @@ wb_1master #(.decode_w(8), #define BUFFER_POOL_RAM_BASE 0x4000 -#define NBUFFERS 8 #define BP_NLINES 0x0200 // number of 32-bit lines in a buffer -#define BP_LAST_LINE (BP_NLINES - 1) // last line in a buffer #define buffer_pool_ram \ ((uint32_t *) BUFFER_POOL_RAM_BASE) @@ -90,7 +56,7 @@ wb_1master #(.decode_w(8), ///////////////////////////////////////////////////// // SPI Core, Slave 2. See core docs for more info -#define SPI_BASE 0x3000 // Base address (16-bit) is base peripheral addr +#define SPI_BASE 0x6000 // Base address (16-bit) is base peripheral addr typedef struct { volatile uint32_t txrx0; @@ -129,7 +95,7 @@ typedef struct { // I2C, Slave 3 // See Wishbone I2C-Master Core Specification. -#define I2C_BASE 0x3100 +#define I2C_BASE 0x6100 typedef struct { volatile uint32_t prescaler_lo; // r/w @@ -171,7 +137,7 @@ typedef struct { // // These go to the daughterboard i/o pins -#define GPIO_BASE 0x3200 +#define GPIO_BASE 0x6200 typedef struct { volatile uint32_t io; // tx data in high 16, rx in low 16 @@ -195,11 +161,11 @@ typedef struct { // The status registers are in Slave 5, Buffer Pool Status. // The control register is in Slave 7, Settings Bus. -#define BUFFER_POOL_STATUS_BASE 0x3300 +#define BUFFER_POOL_STATUS_BASE 0x6300 typedef struct { - volatile uint32_t last_line[NBUFFERS]; // last line xfer'd in buffer - volatile uint32_t status; // error and done flags + volatile uint32_t _padding[8]; + volatile uint32_t status; volatile uint32_t hw_config; // see below volatile uint32_t dummy[3]; volatile uint32_t irqs; @@ -211,74 +177,6 @@ typedef struct { #define BUTTON_PUSHED ((buffer_pool_status->irqs & PIC_BUTTON) ? 0 : 1) -/* - * Buffer n's xfer is done. - * Clear this bit by issuing bp_clear_buf(n) - */ -#define BPS_DONE(n) (0x00000001 << (n)) -#define BPS_DONE_0 BPS_DONE(0) -#define BPS_DONE_1 BPS_DONE(1) -#define BPS_DONE_2 BPS_DONE(2) -#define BPS_DONE_3 BPS_DONE(3) -#define BPS_DONE_4 BPS_DONE(4) -#define BPS_DONE_5 BPS_DONE(5) -#define BPS_DONE_6 BPS_DONE(6) -#define BPS_DONE_7 BPS_DONE(7) - -/* - * Buffer n's xfer had an error. - * Clear this bit by issuing bp_clear_buf(n) - */ -#define BPS_ERROR(n) (0x00000100 << (n)) -#define BPS_ERROR_0 BPS_ERROR(0) -#define BPS_ERROR_1 BPS_ERROR(1) -#define BPS_ERROR_2 BPS_ERROR(2) -#define BPS_ERROR_3 BPS_ERROR(3) -#define BPS_ERROR_4 BPS_ERROR(4) -#define BPS_ERROR_5 BPS_ERROR(5) -#define BPS_ERROR_6 BPS_ERROR(6) -#define BPS_ERROR_7 BPS_ERROR(7) - -/* - * Buffer n is idle. A buffer is idle if it's not - * DONE, ERROR, or processing a transaction. If it's - * IDLE, it's safe to start a new transaction. - * - * Clear this bit by starting a xfer with - * bp_send_from_buf or bp_receive_to_buf. - */ -#define BPS_IDLE(n) (0x00010000 << (n)) -#define BPS_IDLE_0 BPS_IDLE(0) -#define BPS_IDLE_1 BPS_IDLE(1) -#define BPS_IDLE_2 BPS_IDLE(2) -#define BPS_IDLE_3 BPS_IDLE(3) -#define BPS_IDLE_4 BPS_IDLE(4) -#define BPS_IDLE_5 BPS_IDLE(5) -#define BPS_IDLE_6 BPS_IDLE(6) -#define BPS_IDLE_7 BPS_IDLE(7) - -/* - * Buffer n has a "slow path" packet in it. - * This bit is orthogonal to the bits above and indicates that - * the FPGA ethernet rx protocol engine has identified this packet - * as one requiring firmware intervention. - */ -#define BPS_SLOWPATH(n) (0x01000000 << (n)) -#define BPS_SLOWPATH_0 BPS_SLOWPATH(0) -#define BPS_SLOWPATH_1 BPS_SLOWPATH(1) -#define BPS_SLOWPATH_2 BPS_SLOWPATH(2) -#define BPS_SLOWPATH_3 BPS_SLOWPATH(3) -#define BPS_SLOWPATH_4 BPS_SLOWPATH(4) -#define BPS_SLOWPATH_5 BPS_SLOWPATH(5) -#define BPS_SLOWPATH_6 BPS_SLOWPATH(6) -#define BPS_SLOWPATH_7 BPS_SLOWPATH(7) - - -#define BPS_DONE_ALL 0x000000ff // mask of all dones -#define BPS_ERROR_ALL 0x0000ff00 // mask of all errors -#define BPS_IDLE_ALL 0x00ff0000 // mask of all idles -#define BPS_SLOWPATH_ALL 0xff000000 // mask of all slowpaths - // The hw_config register #define HWC_SIMULATION 0x80000000 @@ -306,7 +204,7 @@ hwconfig_wishbone_divisor(void) /////////////////////////////////////////////////// // Ethernet Core, Slave 6 -#define ETH_BASE 0x3400 +#define ETH_BASE 0x6400 #include "eth_mac_regs.h" @@ -319,11 +217,7 @@ hwconfig_wishbone_divisor(void) // 1KB of address space (== 256 32-bit write-only regs) -#define MISC_OUTPUT_BASE 0x2000 -#define TX_PROTOCOL_ENGINE_BASE 0x2080 -#define RX_PROTOCOL_ENGINE_BASE 0x20C0 -#define BUFFER_POOL_CTRL_BASE 0x2100 -#define LAST_SETTING_REG 0x23FC // last valid setting register +#define MISC_OUTPUT_BASE 0x5000 #define SR_MISC 0 #define SR_TX_PROT_ENG 32 @@ -340,53 +234,20 @@ hwconfig_wishbone_divisor(void) #define _SR_ADDR(sr) (MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t)) +#define SR_ADDR_BLDRDONE _SR_ADDR(5) + // --- buffer pool control regs --- typedef struct { - volatile uint32_t ctrl; + volatile uint32_t misc_ctrl; + volatile uint32_t ip_addr; + volatile uint32_t ctrl_ports; //ctrl (low 16) other (high 16) + volatile uint32_t data_ports; //dsp0 (low 16) dsp1 (high 16) + volatile uint32_t cpu_out_ctrl; + volatile uint32_t cpu_inp_ctrl; } buffer_pool_ctrl_t; -// buffer pool ports - -#define PORT_SERDES 0 // serial/deserializer -#define PORT_DSP 1 // DSP tx or rx pipeline -#define PORT_ETH 2 // ethernet tx or rx -#define PORT_RAM 3 // RAM tx or rx - -// the buffer pool ctrl register fields - -#define BPC_BUFFER(n) (((n) & 0xf) << 28) -#define BPC_BUFFER_MASK BPC_BUFFER(~0) -#define BPC_BUFFER_0 BPC_BUFFER(0) -#define BPC_BUFFER_1 BPC_BUFFER(1) -#define BPC_BUFFER_2 BPC_BUFFER(2) -#define BPC_BUFFER_3 BPC_BUFFER(3) -#define BPC_BUFFER_4 BPC_BUFFER(4) -#define BPC_BUFFER_5 BPC_BUFFER(5) -#define BPC_BUFFER_6 BPC_BUFFER(6) -#define BPC_BUFFER_7 BPC_BUFFER(7) -#define BPC_BUFFER_NIL BPC_BUFFER(0x8) // disable - -#define BPC_PORT(n) (((n) & 0x7) << 25) -#define BPC_PORT_MASK BPC_PORT(~0) -#define BPC_PORT_SERDES BPC_PORT(PORT_SERDES) -#define BPC_PORT_DSP BPC_PORT(PORT_DSP) -#define BPC_PORT_ETH BPC_PORT(PORT_ETH) -#define BPC_PORT_RAM BPC_PORT(PORT_RAM) -#define BPC_PORT_NIL BPC_PORT(0x4) // disable - -#define BPC_CLR (1 << 24) // mutually excl commands -#define BPC_READ (1 << 23) -#define BPC_WRITE (1 << 22) - -#define BPC_STEP(step) (((step) & 0xf) << 18) -#define BPC_STEP_MASK BPC_STEP(~0) -#define BPC_LAST_LINE(line) (((line) & 0x1ff) << 9) -#define BPC_LAST_LINE_MASK BPC_LAST_LINE(~0) -#define BPC_FIRST_LINE(line) (((line) & 0x1ff) << 0) -#define BPC_FIRST_LINE_MASK BPC_FIRST_LINE(~0) - -#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) BUFFER_POOL_CTRL_BASE) +#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) _SR_ADDR(SR_BUFFER_POOL_CTRL)) // --- misc outputs --- @@ -679,7 +540,7 @@ typedef struct { volatile uint32_t seqno; // Write to init seqno. It autoincs on match } tx_proto_engine_regs_t; -#define tx_proto_engine ((tx_proto_engine_regs_t *) TX_PROTOCOL_ENGINE_BASE) +#define tx_proto_engine ((tx_proto_engine_regs_t *) _SR_ADDR(SR_TX_PROT_ENG)) /* * --- ethernet rx protocol engine regs (write only) --- @@ -706,14 +567,14 @@ typedef struct { volatile uint32_t ethertype_pad; // ethertype in high 16-bits } rx_proto_engine_regs_t; -#define rx_proto_engine ((rx_proto_engine_regs_t *) RX_PROTOCOL_ENGINE_BASE) +#define rx_proto_engine ((rx_proto_engine_regs_t *) _SR_ADDR(SR_RX_PROT_ENG)) /////////////////////////////////////////////////// // Simple Programmable Interrupt Controller, Slave 8 -#define PIC_BASE 0x3500 +#define PIC_BASE 0x6500 // Interrupt request lines // Bit numbers (LSB == 0) that correpond to interrupts into PIC @@ -773,7 +634,7 @@ typedef struct { /////////////////////////////////////////////////// // UART, Slave 10 -#define UART_BASE 0x3700 +#define UART_BASE 0x6700 typedef struct { // All elements are 8 bits except for clkdiv (16), but we use uint32 to make @@ -791,7 +652,7 @@ typedef struct { /////////////////////////////////////////////////// // ATR Controller, Slave 11 -#define ATR_BASE 0x3800 +#define ATR_BASE 0x6800 typedef struct { volatile uint32_t v[16]; @@ -810,7 +671,7 @@ typedef struct { /////////////////////////////////////////////////// // ICAP, Slave 13 -#define ICAP_BASE 0x3A00 +#define ICAP_BASE 0x6A00 typedef struct { uint32_t icap; //only the lower 8 bits matter } icap_regs_t; @@ -822,7 +683,7 @@ typedef struct { // Control register definitions are the same as SPI, so use SPI_CTRL_ASS, etc. // Peripheral mask not needed since bus is dedicated (CE held low) -#define SPIF_BASE 0x3B00 +#define SPIF_BASE 0x6B00 typedef struct { volatile uint32_t txrx0; volatile uint32_t txrx1; diff --git a/firmware/microblaze/usrp2p/spi_flash_read.c b/firmware/microblaze/usrp2p/spi_flash_read.c index 4682c5fe6..36c326e96 100644 --- a/firmware/microblaze/usrp2p/spi_flash_read.c +++ b/firmware/microblaze/usrp2p/spi_flash_read.c @@ -19,6 +19,7 @@ #include "spi_flash_private.h" #include <stdlib.h> // abort +#include <nonstdio.h> static size_t _spi_flash_log2_memory_size; @@ -100,7 +101,8 @@ spi_flash_read(uint32_t flash_addr, size_t nbytes, void *buf) */ unsigned char *dst = (unsigned char *) buf; size_t m; - for (size_t n = 0; n < nbytes; n += m, dst += m){ + for (size_t n = 0; n < nbytes; n += m){ + spif_regs->ctrl = FLAGS | LEN(16 * 8); // xfer 16 bytes spif_regs->ctrl = FLAGS | LEN(16 * 8) | SPI_CTRL_GO_BSY; spif_wait(); @@ -113,7 +115,7 @@ spi_flash_read(uint32_t flash_addr, size_t nbytes, void *buf) unsigned char *src = (unsigned char *) &w[0]; m = min(nbytes - n, 16); for (size_t i = 0; i < m; i++) - dst[i] = src[i]; + *(dst++) = src[i]; } spif_regs->ss = 0; // deassert chip select } |