diff options
Diffstat (limited to 'firmware/zpu/usrp2p')
| -rw-r--r-- | firmware/zpu/usrp2p/memory_map.h | 127 |
1 files changed, 3 insertions, 124 deletions
diff --git a/firmware/zpu/usrp2p/memory_map.h b/firmware/zpu/usrp2p/memory_map.h index 36d8ac9f2..2101989ff 100644 --- a/firmware/zpu/usrp2p/memory_map.h +++ b/firmware/zpu/usrp2p/memory_map.h @@ -1,4 +1,4 @@ -/* -*- c -*- */ +// Copyright 2010-2011 Ettus Research LLC /* * Copyright 2007,2008,2009 Free Software Foundation, Inc. * @@ -343,10 +343,7 @@ typedef struct { #define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM)) -// --- dsp tx regs --- - -#define MIN_CIC_INTERP 1 -#define MAX_CIC_INTERP 128 +// --- VITA TX CTRL regs --- typedef struct { volatile uint32_t num_chan; @@ -359,52 +356,6 @@ typedef struct { #define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL)) -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t interp_rate; - volatile uint32_t _padding0; // padding for the tx_mux - // NOT freq, scale, interp - /*! - * \brief output mux configuration. - * - * <pre> - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------------------------------+-------+-------+-------+-------+ - * | | DAC1 | DAC0 | - * +-------------------------------+-------+-------+-------+-------+ - * - * There are N DUCs (1 now) with complex inputs and outputs. - * There are two DACs. - * - * Each 4-bit DACx field specifies the source for the DAC - * Each subfield is coded like this: - * - * 3 2 1 0 - * +-------+ - * | N | - * +-------+ - * - * N specifies which DUC output is connected to this DAC. - * - * N which interp output - * --- ------------------- - * 0 DUC 0 I - * 1 DUC 0 Q - * 2 DUC 1 I - * 3 DUC 1 Q - * F All Zeros - * - * The default value is 0x10 - * </pre> - */ - volatile uint32_t tx_mux; - -} dsp_tx_regs_t; - -#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP)) - // --- VITA RX CTRL regs --- typedef struct { // The following 3 are logically a single command register. @@ -412,81 +363,9 @@ typedef struct { volatile uint32_t cmd; // {now, chain, num_samples(30) volatile uint32_t time_secs; volatile uint32_t time_ticks; - - volatile uint32_t clear_overrun; // write anything to clear overrun - volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter - volatile uint32_t vrt_stream_id; // word 1 of packet. - volatile uint32_t vrt_trailer; - volatile uint32_t nsamples_per_pkt; - volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources - volatile uint32_t pad[7]; // Make each structure 16 elements long } sr_rx_ctrl_t; -#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL)) - -// --- dsp rx regs --- -#define MIN_CIC_DECIM 1 -#define MAX_CIC_DECIM 128 - -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t decim_rate; - volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits, - // otherwise it is automatic - volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits - - /*! - * \brief input mux configuration. - * - * This determines which ADC (or constant zero) is connected to - * each DDC input. There are N DDCs (1 now). Each has two inputs. - * - * <pre> - * Mux value: - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * | |Q0 |I0 | - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * - * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) - * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) - * - * The default value is 0x4 - * </pre> - */ - volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v - - /*! - * \brief Streaming GPIO configuration - * - * This determines whether the LSBs of I and Q samples come from the DSP - * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first - * set the GPIO data direction register to have io_rx[15] and/or io_rx[14] - * configured as inputs. The GPIO pins will be sampled at the time the - * remainder of the DSP sample is strobed into the RX sample FIFO. There - * will be a decimation-dependent fixed time offset between the GPIO - * sample stream and the associated RF samples. - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * | MBZ |Q|I| - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * - * I 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[15] - * - * Q 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[14] - */ - volatile uint32_t gpio_stream_enable; - -} dsp_rx_regs_t; - -#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP)) +#define sr_rx_ctrl0 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL)) // ---------------------------------------------------------------- // VITA49 64 bit time (write only) |