aboutsummaryrefslogtreecommitdiffstats
path: root/firmware/zpu/usrp2p/ethernet.c
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/zpu/usrp2p/ethernet.c')
-rw-r--r--firmware/zpu/usrp2p/ethernet.c304
1 files changed, 304 insertions, 0 deletions
diff --git a/firmware/zpu/usrp2p/ethernet.c b/firmware/zpu/usrp2p/ethernet.c
new file mode 100644
index 000000000..03891f959
--- /dev/null
+++ b/firmware/zpu/usrp2p/ethernet.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright 2007 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+//Changes for USRP2P: status registers different (ethernet.h)
+
+#include "ethernet.h"
+#include "memory_map.h"
+#include "eth_phy.h"
+#include <eth_mac.h>
+#include <eth_mac_regs.h>
+#include <pic.h>
+#include <hal_io.h>
+#include <nonstdio.h>
+#include <stdbool.h>
+#include <i2c.h>
+#include "usrp2/fw_common.h"
+
+#define VERBOSE 0
+
+static ethernet_t ed_state;
+static ethernet_link_changed_callback_t ed_callback = 0;
+
+void
+ethernet_register_link_changed_callback(ethernet_link_changed_callback_t new_callback)
+{
+ ed_callback = new_callback;
+}
+
+
+static void
+ed_set_mac_speed(int speed)
+{
+ printf("Speed set to %d\n",speed);
+ /*
+ switch(speed){
+ case 10:
+ eth_mac->speed = 1;
+ break;
+ case 100:
+ eth_mac->speed = 2;
+ break;
+ case 1000:
+ eth_mac->speed = 4;
+ break;
+ default:
+ break;
+ }
+ */
+}
+
+static void
+ed_link_up(int speed)
+{
+ // putstr("ed_link_up: "); puthex16_nl(speed);
+
+ ed_set_mac_speed(speed);
+
+ //turn on link LED for USRP2P
+ hal_set_leds(LED_RJ45, LED_RJ45);
+
+
+ if (ed_callback) // fire link changed callback
+ (*ed_callback)(speed);
+}
+
+static void
+ed_link_down(void)
+{
+ // putstr("ed_link_down\n");
+
+ //turn off link LED for USRP2P
+ hal_set_leds(0, LED_RJ45);
+
+ if (ed_callback) // fire link changed callback
+ (*ed_callback)(0);
+}
+
+
+static void
+ed_link_speed_change(int speed)
+{
+ ed_link_down();
+ ed_link_up(speed);
+}
+
+static void
+print_flow_control(int flow_control)
+{
+ static const char *flow_control_msg[4] = {
+ "NONE", "WE_TX", "WE_RX", "SYMMETRIC"
+ };
+ putstr("ethernet flow control: ");
+ puts(flow_control_msg[flow_control & 0x3]);
+}
+
+static void
+check_flow_control_resolution(void)
+{
+ static const unsigned char table[16] = {
+ // index = {local_asm, local_pause, partner_asm, partner_pause}
+ FC_NONE, FC_NONE, FC_NONE, FC_NONE,
+ FC_NONE, FC_SYMM, FC_NONE, FC_SYMM,
+ FC_NONE, FC_NONE, FC_NONE, FC_WE_TX,
+ FC_NONE, FC_SYMM, FC_WE_RX, FC_SYMM
+ };
+
+ int us = eth_mac_miim_read(PHY_AUTONEG_ADV);
+ int lp = eth_mac_miim_read(PHY_LP_ABILITY);
+ int index = (((us >> 10) & 0x3) << 2) | ((lp >> 10) & 0x3);
+ ed_state.flow_control = table[index];
+
+ if (1)
+ print_flow_control(ed_state.flow_control);
+}
+
+/*
+ * Read the PHY state register to determine link state and speed
+ */
+static void
+ed_check_phy_state(void)
+{
+ int phystat = eth_mac_miim_read(PHY_PHY_STATUS);
+ eth_link_state_t new_state = LS_UNKNOWN;
+ int new_speed = S_UNKNOWN;
+
+ if (VERBOSE){
+ putstr("PHYSTAT: ");
+ puthex16_nl(phystat);
+ }
+
+ if (phystat & PHYSTAT_LINK){ // link's up
+ if (VERBOSE)
+ puts(" LINK_GOOD");
+
+ new_state = LS_UP;
+ switch (phystat & PHYSTAT_SPEED_MASK){
+ case PHYSTAT_SPEED_10:
+ new_speed = 10;
+ break;
+
+ case PHYSTAT_SPEED_100:
+ new_speed = 100;
+ break;
+
+ case PHYSTAT_SPEED_1000:
+ new_speed = 1000;
+ break;
+
+ default:
+ new_speed = S_UNKNOWN;
+ break;
+ }
+
+ check_flow_control_resolution();
+ }
+ else { // link's down
+ if (VERBOSE)
+ puts(" NOT LINK_GOOD");
+
+ new_state = LS_DOWN;
+ new_speed = S_UNKNOWN;
+ }
+
+ if (new_state != ed_state.link_state){
+ ed_state.link_state = new_state; // remember new state
+ if (new_state == LS_UP)
+ ed_link_up(new_speed);
+ else if (new_state == LS_DOWN)
+ ed_link_down();
+ }
+ else if (new_state == LS_UP && new_speed != ed_state.link_speed){
+ ed_state.link_speed = new_speed; // remember new speed
+ ed_link_speed_change(new_speed);
+ }
+}
+
+/*
+ * This is fired when the ethernet PHY state changes
+ */
+static void
+eth_phy_irq_handler(unsigned irq)
+{
+ ed_check_phy_state();
+ eth_mac_miim_read(PHY_INT_STATUS);
+// eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all ints
+}
+
+void
+ethernet_init(void)
+{
+ eth_mac_init(ethernet_mac_addr());
+
+ ed_state.link_state = LS_UNKNOWN;
+ ed_state.link_speed = S_UNKNOWN;
+
+ // initialize MAC registers
+ // eth_mac->tx_hwmark = 0x1e;
+ //eth_mac->tx_lwmark = 0x19;
+
+ //eth_mac->crc_chk_en = 1;
+ //eth_mac->rx_max_length = 2048;
+
+ // configure PAUSE frame stuff
+ //eth_mac->tx_pause_en = 1; // pay attn to pause frames sent to us
+
+ //eth_mac->pause_quanta_set = 38; // a bit more than 1 max frame 16kb/512 + fudge
+ //eth_mac->pause_frame_send_en = 1; // enable sending pause frames
+
+
+ // setup PHY to interrupt on changes
+
+ unsigned mask =
+ (PHY_INT_ENABLE //master interrupt enable
+ | PHY_INT_LINK_STATUS_CHANGE
+ | PHY_INT_RX_STATUS_CHANGE
+ );
+
+ eth_mac_miim_read(PHY_INT_STATUS); //clear interrupts
+ eth_mac_miim_write(PHY_INT_MASK, mask); // enable the ones we want
+
+ //set the LED behavior to activity instead of link
+ unsigned led = (LED_ACTIVITY << PHY_LED_LINK_LSB) | (LED_TX << PHY_LED_TXRX_LSB);
+ eth_mac_miim_write(PHY_LED2, led);
+
+ pic_register_handler(IRQ_PHY, eth_phy_irq_handler);
+
+ // Advertise our flow control configuation.
+ //
+ // We and the link partner each specify two bits in the base page
+ // related to autoconfiguration: NWAY_AR_PAUSE and NWAY_AR_ASM_DIR.
+ // The bits say what a device is "willing" to do, not what may actually
+ // happen as a result of the negotiation. There are 4 cases:
+ //
+ // PAUSE ASM_DIR
+ //
+ // 0 0 I have no flow control capability.
+ //
+ // 1 0 I both assert and respond to flow control.
+ //
+ // 0 1 I assert flow control, but cannot respond. That is,
+ // I want to be able to send PAUSE frames, but will ignore any
+ // you send to me. (This is our configuration.)
+ //
+ // 1 1 I can both assert and respond to flow control AND I am willing
+ // to operate symmetrically OR asymmetrically in EITHER direction.
+ // (We hope the link partner advertises this, otherwise we don't
+ // get what we want.)
+
+ int t = eth_mac_miim_read(PHY_AUTONEG_ADV);
+ t &= ~(NWAY_AR_PAUSE | NWAY_AR_ASM_DIR);
+ t |= NWAY_AR_ASM_DIR;
+
+ // Say we can't to 10BASE-T or 100BASE-TX, half or full duplex
+ t &= ~(NWAY_AR_10T_HD_CAPS | NWAY_AR_10T_FD_CAPS | NWAY_AR_100TX_HD_CAPS | NWAY_AR_100TX_FD_CAPS);
+
+ eth_mac_miim_write(PHY_AUTONEG_ADV, t);
+ int r = eth_mac_miim_read(PHY_AUTONEG_ADV); // DEBUG, read back
+ if (t != r){
+ printf("PHY_AUTONEG_ADV: wrote 0x%x, got 0x%x\n", t, r);
+ }
+
+ // Restart autonegotation.
+ // We want to ensure that we're advertising our PAUSE capabilities.
+ t = eth_mac_miim_read(PHY_CTRL);
+ eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG);
+}
+
+int
+ethernet_check_errors(void)
+{
+ // these registers are reset when read
+
+ int r = 0;
+ /*
+ if (eth_mac_read_rmon(0x05) != 0)
+ r |= RME_RX_CRC;
+ if (eth_mac_read_rmon(0x06) != 0)
+ r |= RME_RX_FIFO_FULL;
+ if (eth_mac_read_rmon(0x07) != 0)
+ r |= RME_RX_2SHORT_2LONG;
+
+ if (eth_mac_read_rmon(0x25) != 0)
+ r |= RME_TX_JAM_DROP;
+ if (eth_mac_read_rmon(0x26) != 0)
+ r |= RME_TX_FIFO_UNDER;
+ if (eth_mac_read_rmon(0x27) != 0)
+ r |= RME_TX_FIFO_OVER;
+ */
+ return r;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 22:30:03 +0000