diff options
Diffstat (limited to 'firmware/zpu/usrp2p/bootloader')
| -rw-r--r-- | firmware/zpu/usrp2p/bootloader/CMakeLists.txt | 39 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/bootloader/Makefile.am | 39 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/bootloader/fpga_bootloader.c | 202 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/bootloader/fw_bootloader.c | 50 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/bootloader/icap_test.c | 31 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/bootloader/init_bootloader.c | 120 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/bootloader/serial_loader_burner.c | 49 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/bootloader/spi_bootloader.c | 134 | ||||
| -rw-r--r-- | firmware/zpu/usrp2p/bootloader/u2p2-rom.ld | 190 |
9 files changed, 854 insertions, 0 deletions
diff --git a/firmware/zpu/usrp2p/bootloader/CMakeLists.txt b/firmware/zpu/usrp2p/bootloader/CMakeLists.txt new file mode 100644 index 000000000..41c86cc9a --- /dev/null +++ b/firmware/zpu/usrp2p/bootloader/CMakeLists.txt @@ -0,0 +1,39 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +INCLUDE(FindPythonInterp) + +MACRO(GEN_RMI target) + GET_FILENAME_COMPONENT(name ${target} NAME_WE) + #command to create a rmi from elf + ADD_CUSTOM_COMMAND( + OUTPUT ${name}.rmi DEPENDS ${name}.bin + COMMAND ${PYTHON_EXECUTABLE} + ARGS ${CMAKE_SOURCE_DIR}/bin/bin_to_ram_macro_init.py ${name}.bin ${name}.rmi + ) + #add a top level target for output files + ADD_CUSTOM_TARGET( + ${name}_rmi ALL DEPENDS ${name}.rmi + ) +ENDMACRO(GEN_RMI) + +######################################################################## +ADD_EXECUTABLE(init_bootloader.elf init_bootloader.c) +TARGET_LINK_LIBRARIES(init_bootloader.elf libusrp2pfw) +GEN_OUTPUTS(init_bootloader.elf) +GEN_RMI(init_bootloader.bin) diff --git a/firmware/zpu/usrp2p/bootloader/Makefile.am b/firmware/zpu/usrp2p/bootloader/Makefile.am new file mode 100644 index 000000000..1fc5daf9c --- /dev/null +++ b/firmware/zpu/usrp2p/bootloader/Makefile.am @@ -0,0 +1,39 @@ +# +# Copyright 2007,2008,2009 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(top_srcdir)/Makefile.common + +ROM_LINKER_SCRIPT = u2p2-rom.ld + +# loads into 8K boot ram located at 0x0000_0000 +AM_CFLAGS = $(COMMON_CFLAGS) -I$(top_srcdir)/usrp2p +AM_LDFLAGS = -Wl,-T,$(ROM_LINKER_SCRIPT) $(COMMON_LFLAGS) -Wl,-defsym -Wl,_STACK_SIZE=1024 + +EXTRA_DIST = $(ROM_LINKER_SCRIPT) + +LDADD = $(top_srcdir)/usrp2p/libusrp2p.a + +noinst_PROGRAMS = \ + init_bootloader.elf + +init_bootloader_elf_SOURCES = init_bootloader.c + +.bin.rmi: + $(top_srcdir)/bin/bin_to_ram_macro_init.py $< $@ + +_generated_from_elf += \ + $(noinst_PROGRAMS:.elf=.rmi) diff --git a/firmware/zpu/usrp2p/bootloader/fpga_bootloader.c b/firmware/zpu/usrp2p/bootloader/fpga_bootloader.c new file mode 100644 index 000000000..9feff6ecd --- /dev/null +++ b/firmware/zpu/usrp2p/bootloader/fpga_bootloader.c @@ -0,0 +1,202 @@ +/* -*- c -*- */ +/* + * Copyright 2009 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This code is bootloader f/w for the slot 0 fpga image. It's job is + * to figure out which fpga image should be loaded, and then to load + * that image from the SPI flash. (FIXME handle retries, errors, + * etc.) + * + * If the center button is down during boot, it loads firwmare + * from 0:0 instead of its normal action. + */ + +#include <stdlib.h> +#include <hal_io.h> +#include <nonstdio.h> +#include <mdelay.h> +#include <quadradio/flashdir.h> +#include <xilinx_v5_icap.h> +#include <bootconfig.h> +#include <bootconfig_private.h> +#include <spi_flash.h> +#include <string.h> +#include <bootloader_utils.h> +#include <hal_interrupts.h> + +#define VERBOSE 1 + +#define OUR_FPGA_IMAGE_NUMBER 0 // this code only runs in slot 0 + +void hal_uart_init(void); +void spif_init(void); +void i2c_init(void); +void bootconfig_init(void); + +void pic_interrupt_handler() __attribute__ ((interrupt_handler)); + +void pic_interrupt_handler() +{ + // nop stub +} + +static int +flash_addr_of_fpga_slot(unsigned int fpga_slot) +{ + const struct flashdir *fd = get_flashdir(); + return fd->slot[fpga_slot + fd->fpga_slot0].start << spi_flash_log2_sector_size(); +} + + +/* + * If the first 256 bytes of the image contain the string of bytes, + * ff ff ff ff aa 99 55 66, we consider it a likely bitstream. + */ +static bool +looks_like_a_bitstream(unsigned int fpga_slot) +{ + unsigned char buf[256]; + static const unsigned char pattern[] = { + 0xff, 0xff, 0xff, 0xff, 0xaa, 0x99, 0x55, 0x66 + }; + + // Read the first 256 bytes of the bitstream + spi_flash_read(flash_addr_of_fpga_slot(fpga_slot), sizeof(buf), buf); + + for (int i = 0; i <= sizeof(buf) - sizeof(pattern); i++) + if (memcmp(pattern, &buf[i], sizeof(pattern)) == 0) + return true; + + return false; +} + +static bool +plausible_bootconfig(bootconfig_t bc) +{ + // Are the fields in range? + if (!validate_bootconfig(bc)) + return false; + + if (!looks_like_a_bitstream(map_fpga_image_number_to_fpga_slot(bc.fpga_image_number))) + return false; + + return true; +} + +// Attempt to boot the fpga image specified in next_boot +static void +initial_boot_attempt(eeprom_boot_info_t *ee) +{ + if (ee->next_boot.fpga_image_number == OUR_FPGA_IMAGE_NUMBER){ + load_firmware(); + return; + } + + ee->nattempts = 1; + _bc_write_eeprom_shadow(); + + unsigned int target_slot = + map_fpga_image_number_to_fpga_slot(ee->next_boot.fpga_image_number); + int flash_addr = flash_addr_of_fpga_slot(target_slot); + + putstr("fpga_bootloader: chaining to "); + puthex4(ee->next_boot.fpga_image_number); + putchar(':'); + puthex4(ee->next_boot.firmware_image_number); + newline(); + mdelay(100); + + while (1){ + icap_reload_fpga(flash_addr); + } +} + +int +main(int argc, char **argv) +{ + hal_disable_ints(); // In case we got here via jmp 0x0 + hal_uart_init(); + i2c_init(); + bootconfig_init(); // Must come after i2c_init. + spif_init(); // Needed for get_flashdir. + + sr_leds->leds = 0xAAAA; + + putstr("\n\n>>> fpga_bootloader <<<\n"); + + putstr("\nBOOTSTS "); + int bootsts = icap_read_config_reg(rBOOTSTS); + puthex32_nl(bootsts); + putstr("STAT "); + int stat = icap_read_config_reg(rSTAT); + puthex32_nl(stat); + + bool fallback = + ((bootsts & (BOOTSTS_VALID_0 | BOOTSTS_FALLBACK_0)) + == (BOOTSTS_VALID_0 | BOOTSTS_FALLBACK_0)); + + if (fallback){ + puts("FALLBACK_0 is set"); + // FIXME handle fallback condition. + } + + const struct flashdir *fd = get_flashdir(); + if (fd == 0) + abort(); + + eeprom_boot_info_t *ee = _bc_get_eeprom_shadow(); + + if (VERBOSE){ + putstr("nattempts: "); + puthex8_nl(ee->nattempts); + } + + mdelay(500); // wait for low-pass on switches + putstr("switches: "); puthex32_nl(readback->switches); + + bool center_btn_down = (readback->switches & BTN_CENTER) != 0; + if (center_btn_down){ + putstr("Center button is down!\n"); + // Force boot of image 0:0 + ee->next_boot = make_bootconfig(0, 0); + } + + // if next_boot is valid, try it + if (plausible_bootconfig(ee->next_boot)) + initial_boot_attempt(ee); // no return + + // if default_boot is valid, try it + if (plausible_bootconfig(ee->default_boot)){ + ee->next_boot = ee->default_boot; + initial_boot_attempt(ee); // no return + } + + // If we're here, we're in trouble. Try all of them... + for (int i = 0; i < 4; i++){ + bootconfig_t bc = make_bootconfig(i, 0); + if (plausible_bootconfig(bc)){ + ee->next_boot = bc; + initial_boot_attempt(ee); // no return + } + } + + // FIXME, try to find something we can load + puts("\n!!! Failed to find a valid FPGA bitstream!\n\n"); + + return 0; +} diff --git a/firmware/zpu/usrp2p/bootloader/fw_bootloader.c b/firmware/zpu/usrp2p/bootloader/fw_bootloader.c new file mode 100644 index 000000000..a2c32bf8e --- /dev/null +++ b/firmware/zpu/usrp2p/bootloader/fw_bootloader.c @@ -0,0 +1,50 @@ +/* -*- c -*- */ +/* + * Copyright 2009 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <memory_map.h> +#include <nonstdio.h> +#include <stdlib.h> +#include <bootconfig.h> +#include <bootconfig_private.h> +#include <bootloader_utils.h> +#include <hal_interrupts.h> + + +void hal_uart_init(void); +void spif_init(void); +void i2c_init(void); +void bootconfig_init(void); + +void pic_interrupt_handler() __attribute__ ((interrupt_handler)); + +void pic_interrupt_handler() +{ + // nop stub +} + +int +main(int argc, char **argv) +{ + hal_disable_ints(); // In case we got here via jmp 0x0 + hal_uart_init(); + i2c_init(); + bootconfig_init(); // Must come after i2c_init. + spif_init(); // Needed for get_flashdir. + + load_firmware(); +} diff --git a/firmware/zpu/usrp2p/bootloader/icap_test.c b/firmware/zpu/usrp2p/bootloader/icap_test.c new file mode 100644 index 000000000..5feb9d014 --- /dev/null +++ b/firmware/zpu/usrp2p/bootloader/icap_test.c @@ -0,0 +1,31 @@ +/* -*- c++ -*- */ +/* + * Copyright 2010 Ettus Research LLC + * + */ + +#include <memory_map.h> +#include <hal_io.h> +#include <xilinx_s3_icap.h> +#include <nonstdio.h> + +void delay(uint32_t t) { + while(t-- != 0) asm("NOP"); +} + + +int main(int argc, char *argv[]) { + pic_init(); + hal_uart_init(); + puts("\nStarting delay...\n"); + + output_regs->leds = 0xFF; + delay(4000000); + output_regs->leds = 0x00; + delay(4000000); + + puts("Rebooting FPGA to 0x00000000\n"); + icap_reload_fpga((uint32_t)0x00000000); + + return 0; +} diff --git a/firmware/zpu/usrp2p/bootloader/init_bootloader.c b/firmware/zpu/usrp2p/bootloader/init_bootloader.c new file mode 100644 index 000000000..cfa80ffea --- /dev/null +++ b/firmware/zpu/usrp2p/bootloader/init_bootloader.c @@ -0,0 +1,120 @@ +/* -*- c++ -*- */ +/* + * Copyright 2010 Ettus Research LLC + * + */ + +#include <memory_map.h> +#include <nonstdio.h> +#include <hal_io.h> +#include <xilinx_s3_icap.h> +#include <spi_flash.h> +#include <spi_flash_private.h> +//#include <clocks.h> +#include <ihex.h> +#include <bootloader_utils.h> +#include <string.h> +#include <hal_uart.h> +#include <i2c.h> +#include "usrp2/fw_common.h" + +//void pic_interrupt_handler() __attribute__ ((interrupt_handler)); + +void pic_interrupt_handler() +{ + // nop stub +} + +void load_ihex(void) { //simple IHEX parser to load proper records into RAM. loads program when it receives end of record. + char buf[128]; //input data buffer + uint8_t ihx[32]; //ihex data buffer + + ihex_record_t ihex_record; + ihex_record.data = ihx; + + while(1) { + gets(buf); + + if(!ihex_parse(buf, &ihex_record)) { //RAM data record is valid + if(ihex_record.addr >= RAM_BASE) { //it's expecting to see FULLY RELOCATED IHX RECORDS. every address referenced to 0x8000, including vectors. + memcpy((void *) (ihex_record.addr), ihex_record.data, ihex_record.length); + puts("OK"); + } else if(ihex_record.type == 1) { //end of record + puts("OK"); + //load main firmware + start_program(); + puts("ERROR: main image returned! Back in IHEX load mode."); + } else puts("NOK"); //RAM loads do not support extended segment address records (04) -- upper 16 bits are always "0". + } else puts("NOK"); + } +} + +void delay(uint32_t t) { + while(t-- != 0) asm("NOP"); +} + +int main(int argc, char *argv[]) { + hal_disable_ints(); // In case we got here via jmp 0x0 + output_regs->leds = 0xFF; + delay(5000); + output_regs->leds = 0x00; + hal_uart_init(); + spif_init(); + i2c_init(); //for EEPROM + puts("USRP2+ bootloader super ultra ZPU edition\n"); + + bool production_image = find_safe_booted_flag(); + set_safe_booted_flag(0); //haven't booted yet + + if(BUTTON_PUSHED) { //see memory_map.h + puts("Starting USRP2+ in safe mode."); + if(is_valid_fw_image(SAFE_FW_IMAGE_LOCATION_ADDR)) { + set_safe_booted_flag(1); //let the firmware know it's the safe image + spi_flash_read(SAFE_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE); + start_program(); + puts("ERROR: return from main program! This should never happen!"); + icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR); + } else { + puts("ERROR: no safe firmware image available. I am a brick. Feel free to load IHEX to RAM."); + load_ihex(); + } + } + + if(!production_image) { + puts("Checking for valid production FPGA image..."); + if(is_valid_fpga_image(PROD_FPGA_IMAGE_LOCATION_ADDR)) { + puts("Valid production FPGA image found. Attempting to boot."); + set_safe_booted_flag(1); + delay(300); //so serial output can finish + icap_reload_fpga(PROD_FPGA_IMAGE_LOCATION_ADDR); + } + puts("No valid production FPGA image found.\nAttempting to load production firmware..."); + } + if(is_valid_fw_image(PROD_FW_IMAGE_LOCATION_ADDR)) { + puts("Valid production firmware found. Loading..."); + spi_flash_read(PROD_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE); + puts("Finished loading. Starting image."); + delay(300); + start_program(); + puts("ERROR: Return from main program! This should never happen!"); + //if this happens, though, the safest thing to do is reboot the whole FPGA and start over. + delay(300); + icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR); + return 1; + } + puts("No valid production firmware found. Trying safe firmware..."); + if(is_valid_fw_image(SAFE_FW_IMAGE_LOCATION_ADDR)) { + spi_flash_read(SAFE_FW_IMAGE_LOCATION_ADDR, FW_IMAGE_SIZE_BYTES, (void *)RAM_BASE); + puts("Finished loading. Starting image."); + delay(300); + start_program(); + puts("ERROR: return from main program! This should never happen!"); + delay(300); + icap_reload_fpga(SAFE_FPGA_IMAGE_LOCATION_ADDR); + return 1; + } + puts("ERROR: no safe firmware image available. I am a brick. Feel free to load IHEX to RAM."); + load_ihex(); + + return 0; +} diff --git a/firmware/zpu/usrp2p/bootloader/serial_loader_burner.c b/firmware/zpu/usrp2p/bootloader/serial_loader_burner.c new file mode 100644 index 000000000..4ac4df454 --- /dev/null +++ b/firmware/zpu/usrp2p/bootloader/serial_loader_burner.c @@ -0,0 +1,49 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <hal_io.h> +#include <nonstdio.h> +#include <mdelay.h> +#include <gdbstub2.h> + +void hal_uart_init(void); +void spif_init(void); + +void pic_interrupt_handler() __attribute__ ((interrupt_handler)); + +void pic_interrupt_handler() +{ + // nop stub +} + +int +main(int argc, char **argv) +{ + hal_uart_init(); + spif_init(); + + sr_leds->leds = 0; + mdelay(100); + sr_leds->leds = ~0; + mdelay(100); + sr_leds->leds = 0; + + puts("\n\n>>> stage1: serial_loader_burner <<<"); + + gdbstub2_main_loop(); +} diff --git a/firmware/zpu/usrp2p/bootloader/spi_bootloader.c b/firmware/zpu/usrp2p/bootloader/spi_bootloader.c new file mode 100644 index 000000000..678e66cf7 --- /dev/null +++ b/firmware/zpu/usrp2p/bootloader/spi_bootloader.c @@ -0,0 +1,134 @@ +/* -*- c -*- */ +/* + * Copyright 2009 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <hal_io.h> +#include <nonstdio.h> +#include <mdelay.h> +#include <spi_flash.h> +#include <quadradio/flashdir.h> +#include <quadradio/simple_binary_format.h> +#include <stdlib.h> + + +void hal_uart_init(void); +void spif_init(void); + +void pic_interrupt_handler() __attribute__ ((interrupt_handler)); + +void pic_interrupt_handler() +{ + // nop stub +} + +static void +error(int e) +{ + putstr("ERR"); + puthex8(e); + newline(); +} + +static void +load(uint32_t flash_addr, uint32_t ram_addr, uint32_t size) +{ + spi_flash_read(flash_addr, size, (void *) ram_addr); +} + +static bool +load_from_slot(const struct flashdir *fd, int fw_slot) +{ + putstr("Loading f/w image "); + putchar('0' + fw_slot); + putstr("... "); + + if (fw_slot >= fd->fw_nslots){ + error(1); + return false; + } + + int slot = fw_slot + fd->fw_slot0; + if (fd->slot[slot].start == 0 || fd->slot[slot].start == 0xffff + || fd->slot[slot].len == 0 || fd->slot[slot].len == 0xffff){ + error(2); + return false; + } + + uint32_t sbf_base = fd->slot[slot].start << spi_flash_log2_sector_size(); + uint32_t sbf_len = fd->slot[slot].len << spi_flash_log2_sector_size(); + uint32_t sbf_offset = 0; + + struct sbf_header sbf; + spi_flash_read(sbf_base, sizeof(struct sbf_header), &sbf); + if (sbf.magic != SBF_MAGIC || sbf.nsections > SBF_MAX_SECTIONS){ + error(3); + return false; + } + sbf_offset += sizeof(struct sbf_header); + + unsigned int i; + for (i = 0; i < sbf.nsections; i++){ + if (sbf_offset + sbf.sec_desc[i].length > sbf_len){ + error(4); + return false; + } + load(sbf_offset + sbf_base, + sbf.sec_desc[i].target_addr, + sbf.sec_desc[i].length); + sbf_offset += sbf.sec_desc[i].length; + } + putstr("Done!"); + + typedef void (*fptr_t)(void); + (*(fptr_t) sbf.entry)(); // almost certainly no return + + return true; +} + +int +main(int argc, char **argv) +{ + hal_uart_init(); + spif_init(); + + sr_leds->leds = 0; + mdelay(100); + sr_leds->leds = ~0; + mdelay(100); + sr_leds->leds = 0; + + putstr("\n>>> spi_bootloader <<<\n"); + + const struct flashdir *fd = get_flashdir(); + if (fd == 0) + abort(); + + while(1){ + int sw; + int fw_slot; + + sw = readback->switches; + fw_slot = sw & 0x7; + + if (!load_from_slot(fd, fw_slot)){ + if (fw_slot != 0){ + putstr("Falling back to slot 0\n"); + load_from_slot(fd, 0); + } + } + } +} diff --git a/firmware/zpu/usrp2p/bootloader/u2p2-rom.ld b/firmware/zpu/usrp2p/bootloader/u2p2-rom.ld new file mode 100644 index 000000000..4c9eaa8e5 --- /dev/null +++ b/firmware/zpu/usrp2p/bootloader/u2p2-rom.ld @@ -0,0 +1,190 @@ +/* + * Same as default, but with bss and stack moved to top 2K of main ram + * Copied from qr-rom.ld + */ + +/* Default linker script, for normal executables */ +OUTPUT_FORMAT("elf32-microblaze", "", "") +/*SEARCH_DIR("/home/eb/build/Xilinx_EDK_GNU_10.1i/mb/release/lin/mb/microblaze-xilinx-elf/lib");*/ + + +ENTRY(_start) +_TEXT_START_ADDR = DEFINED(_TEXT_START_ADDR) ? _TEXT_START_ADDR : 0x50; +_HEAP_SIZE = DEFINED(_HEAP_SIZE) ? _HEAP_SIZE : 0x0; +_STACK_SIZE = DEFINED(_STACK_SIZE) ? _STACK_SIZE : 0x400; +_BSS_START_ADDR = DEFINED(_BSS_START_ADDR) ? _BSS_START_ADDR : 0xF800; +SECTIONS +{ + .vectors.reset 0x0 : { KEEP (*(.vectors.reset)) } = 0 + .vectors.sw_exception 0x8 : { KEEP (*(.vectors.sw_exception)) } = 0 + .vectors.interrupt 0x10 : { KEEP (*(.vectors.interrupt)) } = 0 + .vectors.debug_sw_break 0x18 : { KEEP (*(.vectors.debug_sw_break)) } = 0 + .vectors.hw_exception 0x20 : { KEEP (*(.vectors.hw_exception)) } = 0 + . = _TEXT_START_ADDR; + _ftext = .; + .text : { + *(.text) + *(.text.*) + *(.gnu.linkonce.t.*) + } + _etext = .; + .init : { KEEP (*(.init)) } =0 + .fini : { KEEP (*(.fini)) } =0 + PROVIDE (__CTOR_LIST__ = .); + PROVIDE (___CTOR_LIST__ = .); + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } + PROVIDE (__CTOR_END__ = .); + PROVIDE (___CTOR_END__ = .); + PROVIDE (__DTOR_LIST__ = .); + PROVIDE (___DTOR_LIST__ = .); + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } + PROVIDE (__DTOR_END__ = .); + PROVIDE (___DTOR_END__ = .); + . = ALIGN(4); + _frodata = . ; + .rodata : { + *(.rodata) + *(.rodata.*) + *(.gnu.linkonce.r.*) + CONSTRUCTORS; /* Is this needed? */ + } + _erodata = .; + /* Alignments by 8 to ensure that _SDA2_BASE_ on a word boundary */ + /* Note that .sdata2 and .sbss2 must be contiguous */ + . = ALIGN(8); + _ssrw = .; + .sdata2 : { + *(.sdata2) + *(.sdata2.*) + *(.gnu.linkonce.s2.*) + } + . = ALIGN(4); + .sbss2 : { + PROVIDE (__sbss2_start = .); + *(.sbss2) + *(.sbss2.*) + *(.gnu.linkonce.sb2.*) + PROVIDE (__sbss2_end = .); + } + . = ALIGN(8); + _essrw = .; + _ssrw_size = _essrw - _ssrw; + PROVIDE (_SDA2_BASE_ = _ssrw + (_ssrw_size / 2 )); + . = ALIGN(4); + _fdata = .; + .data : { + *(.data) + *(.gnu.linkonce.d.*) + CONSTRUCTORS; /* Is this needed? */ + } + _edata = . ; + /* Added to handle pic code */ + .got : { + *(.got) + } + .got1 : { + *(.got1) + } + .got2 : { + *(.got2) + } + /* Added by Sathya to handle C++ exceptions */ + .eh_frame : { + *(.eh_frame) + } + .jcr : { + *(.jcr) + } + .gcc_except_table : { + *(.gcc_except_table) + } + /* Alignments by 8 to ensure that _SDA_BASE_ on a word boundary */ + /* Note that .sdata and .sbss must be contiguous */ + . = ALIGN(8); + _ssro = .; + .sdata : { + *(.sdata) + *(.sdata.*) + *(.gnu.linkonce.s.*) + } + . = ALIGN(4); + .sbss : { + PROVIDE (__sbss_start = .); + *(.sbss) + *(.sbss.*) + *(.gnu.linkonce.sb.*) + PROVIDE (__sbss_end = .); + } + . = ALIGN(8); + _essro = .; + _ssro_size = _essro - _ssro; + PROVIDE (_SDA_BASE_ = _ssro + (_ssro_size / 2 )); + . = _BSS_START_ADDR; + . = ALIGN(4); + _fbss = .; + .bss : { + PROVIDE (__bss_start = .); + *(.bss) + *(.bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(4); + PROVIDE (__bss_end = .); + } + . = ALIGN(4); + .heap : { + _heap = .; + _heap_start = .; + . += _HEAP_SIZE; + _heap_end = .; + } + _end = .; + . = ALIGN(4); + . = 0xFFF0; + .stack : { + /* + _stack_end = .; + . += _STACK_SIZE; + . = ALIGN(8); + _stack = .; + _end = .; + */ + _stack_end = .; + _stack = .; + } + .tdata : { + *(.tdata) + *(.tdata.*) + *(.gnu.linkonce.td.*) + } + .tbss : { + *(.tbss) + *(.tbss.*) + *(.gnu.linkonce.tb.*) + } +} |