diff options
Diffstat (limited to 'firmware/zpu/usrp2')
| -rw-r--r-- | firmware/zpu/usrp2/CMakeLists.txt | 37 | ||||
| -rw-r--r-- | firmware/zpu/usrp2/eth_phy.h | 219 | ||||
| -rw-r--r-- | firmware/zpu/usrp2/ethernet.c | 290 | ||||
| -rw-r--r-- | firmware/zpu/usrp2/sd.c | 197 | ||||
| -rw-r--r-- | firmware/zpu/usrp2/sd.h | 122 |
5 files changed, 865 insertions, 0 deletions
diff --git a/firmware/zpu/usrp2/CMakeLists.txt b/firmware/zpu/usrp2/CMakeLists.txt new file mode 100644 index 000000000..3662532f1 --- /dev/null +++ b/firmware/zpu/usrp2/CMakeLists.txt @@ -0,0 +1,37 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +INCLUDE(${CMAKE_SOURCE_DIR}/lib/CMakeLists.txt) +INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) + +ADD_DEFINITIONS(-DUSRP2) +ADD_DEFINITIONS(-DUDP_UART_MASK=0) + +ADD_LIBRARY(libusrp2fw STATIC + ${COMMON_SRCS} + sd.c + ethernet.c +) + +######################################################################## +SET(GEN_OUTPUTS_BIN_SIZE 0x3fff) + +ADD_EXECUTABLE(usrp2_txrx_uhd.elf ${CMAKE_SOURCE_DIR}/apps/txrx_uhd.c) +TARGET_LINK_LIBRARIES(usrp2_txrx_uhd.elf libusrp2fw) +GEN_OUTPUTS(usrp2_txrx_uhd.elf) + diff --git a/firmware/zpu/usrp2/eth_phy.h b/firmware/zpu/usrp2/eth_phy.h new file mode 100644 index 000000000..6c16f97b7 --- /dev/null +++ b/firmware/zpu/usrp2/eth_phy.h @@ -0,0 +1,219 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* Much of this was extracted from the Linux e1000_hw.h file */ + +#ifndef INCLUDED_ETH_PHY_H +#define INCLUDED_ETH_PHY_H + +/* PHY 1000 MII Register/Bit Definitions */ +/* PHY Registers defined by IEEE */ + +#define PHY_CTRL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ + +/* PHY 1000 MII Register additions in DP83856 */ +/* The part implements 0x00 thru 0x1f; we use these. */ + +#define PHY_LINK_AN 0x11 /* Link and Auto Negotiation Status Reg */ +#define PHY_INT_STATUS 0x14 /* Interupt Status Reg (RO) */ +#define PHY_INT_MASK 0x15 /* Interrupt Mask Reg (RW) */ +#define PHY_INT_CLEAR 0x17 /* Interrupt Clear Reg (RW) */ + + +/* Bit definitions for some of the registers above */ + +/* PHY Control Register (PHY_CTRL) */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ + +/* PHY Status Register (PHY_STATUS) */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/* Autoneg Advertisement Register (PHY_AUTONEG_ADV) */ +#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Link Partner Ability Register (Base Page) (PHY_LP_ABILITY) */ +#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ +#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ +#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ +#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ +#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ +#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ +#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ +#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ +#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Autoneg Expansion Register (PHY_AUTONEG_EXP) */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ +#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ +#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ +#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ +#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */ + +/* Next Page TX Register (PHY_NEXT_PAGE_TX) */ +#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ + +/* Link Partner Next Page Register (PHY_LP_NEXT_PAGE) */ +#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ +#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ + +/* 1000BASE-T Control Register (PHY_1000T_CTRL) */ +#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ + /* 0=DTE device */ +#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ + /* 0=Configure PHY as Slave */ +#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ + /* 0=Automatic Master/Slave config */ +#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ + +/* 1000BASE-T Status Register (PHY_1000T_STATUS) */ +#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ +#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ +#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ +#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ +#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12 +#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13 +#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 +#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20 +#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100 + +/* Extended Status Register (PHY_EXT_STATUS) */ +#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ +#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ +#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ +#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ + +#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ +#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ + +#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ + /* (0=enable, 1=disable) */ + +/* Link and Auto Negotiation Status Reg (PHY_LINK_AN) [READ-ONLY] */ +#define LANSR_MASTER 0x0001 /* 1=PHY is currently in master mode */ +#define LANSR_FULL_DUPLEX 0x0002 /* 1=PHY is currently full duplex */ +#define LANSR_LINK_GOOD 0x0004 /* 1=a good link is established */ +#define LANSR_SPEED_MASK 0x0018 +#define LANSR_SPEED_10 0x0000 /* 10Mb/s */ +#define LANSR_SPEED_100 0x0008 /* 100Mb/s */ +#define LANSR_SPEED_1000 0x0010 /* 1000Mb/s */ +#define LANSR_SPEED_RSRVD 0x0018 /* reserved */ +#define LANSR_NON_COMP_MODE 0x0020 /* 1=detects only in non-compliant mode */ +#define LANSR_DEEP_LOOPBACK 0x0040 /* 1=the PHY operates in deep loopback mode */ +#define LANSR_SHALLOW_LOOPBACK 0x0080 /* 1=the PHY operates in shallow loopback mode */ +#define LANSR_RSRVD_8 0x0100 /* reserved */ +#define LANSR_FIFO_ERR 0x0200 /* 1=FIFO error occurred */ +#define LANSR_MDIX_XOVER 0x0400 /* 1=PHY's MDI is in cross-over mode */ +#define LANSR_RSRVD_11 0x0800 /* resevered */ +#define LANSR_TP_POLARITY_REV 0xf000 /* Twisted pair polarity status A:D([15:12]) 1=reversed */ + +/* Interrupt status, mask and clear regs (PHY_INT_{STATUS,MASK,CLEAR}) */ +#define PHY_INT_RSRVD_0 0x0001 /* reserved */ +#define PHY_INT_RSRVD_1 0x0002 /* reserved */ +#define PHY_INT_RSRVD_2 0x0004 /* reserved */ +#define PHY_INT_REM_FLT_CNG 0x0008 /* Remote Fault Changed */ +#define PHY_INT_AN_CMPL 0x0010 /* Auto-negotiation completion */ +#define PHY_INT_NXT_PG_RCVD 0x0020 /* Next Page Received */ +#define PHY_INT_JABBER_CNG 0x0040 /* Jabber Changed */ +#define PHY_INT_NO_LINK 0x0080 /* No link after auto-negotiation */ +#define PHY_INT_NO_HCD 0x0100 /* AN couldn't determine highest common denominator */ +#define PHY_INT_MAS_SLA_ERR 0x0200 /* Master / Slave Error: couldn't resolve */ +#define PHY_INT_PRL_DET_FLT 0x0400 /* Parallel detection fault */ +#define PHY_INT_POL_CNG 0x0800 /* Polarity of any channel changed */ +#define PHY_INT_MDIX_CNG 0x1000 /* MDIX changed. A pair swap occurred. */ +#define PHY_INT_DPLX_CNG 0x2000 /* Duplex changed */ +#define PHY_INT_LNK_CNG 0x4000 /* Link changed (asserted when a link is established or broken) */ +#define PHY_INT_SPD_CNG 0x8000 /* Speed changed */ + +#endif /* INCLUDED_ETH_PHY_H */ diff --git a/firmware/zpu/usrp2/ethernet.c b/firmware/zpu/usrp2/ethernet.c new file mode 100644 index 000000000..9a41eb280 --- /dev/null +++ b/firmware/zpu/usrp2/ethernet.c @@ -0,0 +1,290 @@ +/* + * Copyright 2011 Ettus Research LLC + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "ethernet.h" +#include "eth_phy.h" +#include "eth_mac.h" +#include "pic.h" +#include "hal_io.h" +#include "nonstdio.h" + +#define VERBOSE 1 + +static ethernet_t ed_state; +static ethernet_link_changed_callback_t ed_callback = 0; + +void +ethernet_register_link_changed_callback(ethernet_link_changed_callback_t new_callback) +{ + ed_callback = new_callback; +} + + +static void +ed_set_mac_speed(int speed) +{ + printf("Speed set to %d\n",speed); + /* + switch(speed){ + case 10: + eth_mac->speed = 1; + break; + case 100: + eth_mac->speed = 2; + break; + case 1000: + eth_mac->speed = 4; + break; + default: + break; + } + */ +} + +static void +ed_link_up(int speed) +{ + // putstr("ed_link_up: "); puthex16_nl(speed); + + ed_set_mac_speed(speed); + + if (ed_callback) // fire link changed callback + (*ed_callback)(speed); +} + +static void +ed_link_down(void) +{ + // putstr("ed_link_down\n"); + + if (ed_callback) // fire link changed callback + (*ed_callback)(0); +} + + +static void +ed_link_speed_change(int speed) +{ + ed_link_down(); + ed_link_up(speed); +} + +static void +print_flow_control(int flow_control) +{ + static const char *flow_control_msg[4] = { + "NONE", "WE_TX", "WE_RX", "SYMMETRIC" + }; + putstr("ethernet flow control: "); + puts(flow_control_msg[flow_control & 0x3]); +} + +static void +check_flow_control_resolution(void) +{ + static const unsigned char table[16] = { + // index = {local_asm, local_pause, partner_asm, partner_pause} + FC_NONE, FC_NONE, FC_NONE, FC_NONE, + FC_NONE, FC_SYMM, FC_NONE, FC_SYMM, + FC_NONE, FC_NONE, FC_NONE, FC_WE_TX, + FC_NONE, FC_SYMM, FC_WE_RX, FC_SYMM + }; + + int us = eth_mac_miim_read(PHY_AUTONEG_ADV); + int lp = eth_mac_miim_read(PHY_LP_ABILITY); + int index = (((us >> 10) & 0x3) << 2) | ((lp >> 10) & 0x3); + ed_state.flow_control = table[index]; + + if (1) + print_flow_control(ed_state.flow_control); +} + +/* + * Read the PHY state register to determine link state and speed + */ +static void +ed_check_phy_state(void) +{ + int lansr = eth_mac_miim_read(PHY_LINK_AN); + eth_link_state_t new_state = LS_UNKNOWN; + int new_speed = S_UNKNOWN; + + if (VERBOSE){ + putstr("LANSR: "); + puthex16_nl(lansr); + } + + if (lansr & LANSR_LINK_GOOD){ // link's up + if (VERBOSE) + puts(" LINK_GOOD"); + + new_state = LS_UP; + switch (lansr & LANSR_SPEED_MASK){ + case LANSR_SPEED_10: + new_speed = 10; + break; + + case LANSR_SPEED_100: + new_speed = 100; + break; + + case LANSR_SPEED_1000: + new_speed = 1000; + break; + + default: + new_speed = S_UNKNOWN; + break; + } + + check_flow_control_resolution(); + } + else { // link's down + if (VERBOSE) + puts(" NOT LINK_GOOD"); + + new_state = LS_DOWN; + new_speed = S_UNKNOWN; + } + + if (new_state != ed_state.link_state){ + ed_state.link_state = new_state; // remember new state + if (new_state == LS_UP) + ed_link_up(new_speed); + else if (new_state == LS_DOWN) + ed_link_down(); + } + else if (new_state == LS_UP && new_speed != ed_state.link_speed){ + ed_state.link_speed = new_speed; // remember new speed + ed_link_speed_change(new_speed); + } +} + +/* + * This is fired when the ethernet PHY state changes + */ +static void +eth_phy_irq_handler(unsigned irq) +{ + ed_check_phy_state(); + eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all ints +} + +void +ethernet_init(void) +{ + eth_mac_init(ethernet_mac_addr()); + + ed_state.link_state = LS_UNKNOWN; + ed_state.link_speed = S_UNKNOWN; + + // initialize MAC registers + // eth_mac->tx_hwmark = 0x1e; + //eth_mac->tx_lwmark = 0x19; + + //eth_mac->crc_chk_en = 1; + //eth_mac->rx_max_length = 2048; + + // configure PAUSE frame stuff + //eth_mac->tx_pause_en = 1; // pay attn to pause frames sent to us + + //eth_mac->pause_quanta_set = 38; // a bit more than 1 max frame 16kb/512 + fudge + //eth_mac->pause_frame_send_en = 1; // enable sending pause frames + + + // setup PHY to interrupt on changes + + unsigned mask = + (PHY_INT_AN_CMPL // auto-neg completed + | PHY_INT_NO_LINK // no link after auto-neg + | PHY_INT_NO_HCD // no highest common denominator + | PHY_INT_MAS_SLA_ERR // couldn't resolve master/slave + | PHY_INT_PRL_DET_FLT // parallel detection fault + | PHY_INT_LNK_CNG // link established or broken + | PHY_INT_SPD_CNG // speed changed + ); + + eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all pending interrupts + eth_mac_miim_write(PHY_INT_MASK, mask); // enable the ones we want + + pic_register_handler(IRQ_PHY, eth_phy_irq_handler); + + // Advertise our flow control configuation. + // + // We and the link partner each specify two bits in the base page + // related to autoconfiguration: NWAY_AR_PAUSE and NWAY_AR_ASM_DIR. + // The bits say what a device is "willing" to do, not what may actually + // happen as a result of the negotiation. There are 4 cases: + // + // PAUSE ASM_DIR + // + // 0 0 I have no flow control capability. + // + // 1 0 I both assert and respond to flow control. + // + // 0 1 I assert flow control, but cannot respond. That is, + // I want to be able to send PAUSE frames, but will ignore any + // you send to me. (This is our configuration.) + // + // 1 1 I can both assert and respond to flow control AND I am willing + // to operate symmetrically OR asymmetrically in EITHER direction. + // (We hope the link partner advertises this, otherwise we don't + // get what we want.) + + int t = eth_mac_miim_read(PHY_AUTONEG_ADV); + t &= ~(NWAY_AR_PAUSE | NWAY_AR_ASM_DIR); + t |= NWAY_AR_ASM_DIR; + + // Say we can't to 10BASE-T or 100BASE-TX, half or full duplex + t &= ~(NWAY_AR_10T_HD_CAPS | NWAY_AR_10T_FD_CAPS | NWAY_AR_100TX_HD_CAPS | NWAY_AR_100TX_FD_CAPS); + + eth_mac_miim_write(PHY_AUTONEG_ADV, t); + int r = eth_mac_miim_read(PHY_AUTONEG_ADV); // DEBUG, read back + if (t != r){ + printf("PHY_AUTONEG_ADV: wrote 0x%x, got 0x%x\n", t, r); + } + + // Restart autonegotation. + // We want to ensure that we're advertising our PAUSE capabilities. + t = eth_mac_miim_read(PHY_CTRL); + eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG); +} + +int +ethernet_check_errors(void) +{ + // these registers are reset when read + + int r = 0; + /* + if (eth_mac_read_rmon(0x05) != 0) + r |= RME_RX_CRC; + if (eth_mac_read_rmon(0x06) != 0) + r |= RME_RX_FIFO_FULL; + if (eth_mac_read_rmon(0x07) != 0) + r |= RME_RX_2SHORT_2LONG; + + if (eth_mac_read_rmon(0x25) != 0) + r |= RME_TX_JAM_DROP; + if (eth_mac_read_rmon(0x26) != 0) + r |= RME_TX_FIFO_UNDER; + if (eth_mac_read_rmon(0x27) != 0) + r |= RME_TX_FIFO_OVER; + */ + return r; +} diff --git a/firmware/zpu/usrp2/sd.c b/firmware/zpu/usrp2/sd.c new file mode 100644 index 000000000..d634baea8 --- /dev/null +++ b/firmware/zpu/usrp2/sd.c @@ -0,0 +1,197 @@ +/* -*- c -*- */ +/* + * Copyright 2008-2011 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "sd.h" +#include "memory_map.h" +#include "stdint.h" +#include "stdio.h" + +static inline void +sd_packarg(unsigned char *argument,unsigned int value) +{ + argument[3] = (unsigned char)(value >> 24); + argument[2] = (unsigned char)(value >> 16); + argument[1] = (unsigned char)(value >> 8); + argument[0] = (unsigned char)(value); +} + +int +sd_init(void) +{ + unsigned char response[5]; + unsigned char argument[4]; + int i,j; + + for(i=0;i<4;i++) + argument[i] = 0; + + // Set clock to less than 400 kHz to start out + sdspi_regs->clkdiv = 128; + + // Delay at least 74 cycles + sd_assert_cs(); + for(i = 0; i < 100; i++) + sd_send_byte(SD_IDLE); + sd_deassert_cs(); + + // Initialization Sequence -- CMD0 CMD55 ACMD41 CMD58 + // Put card in idle state + if(sd_send_command(SD_CMD0,SD_CMD0_R,response,argument)==0) + return 0; // Something went wrong in command + + j = 0; + do { + j++; + if(sd_send_command(SD_CMD55,SD_CMD55_R,response,argument)==1) + sd_send_command(SD_ACMD41,SD_ACMD41_R,response,argument); + else + j = SD_IDLE_WAIT_MAX; + } + while(((response[0] & SD_MSK_IDLE) == SD_MSK_IDLE) && (j < SD_IDLE_WAIT_MAX)); + + if(j>= SD_IDLE_WAIT_MAX) // IDLE timeout exceeded, card asleep + return 0; + + // CMD58 reads the SD card capabilities + if(sd_send_command(SD_CMD58,SD_CMD58_R,response,argument)==0) + return 0; // CMD58 FAIL + + if((response[2] & SD_MSK_OCR_33) != SD_MSK_OCR_33) + return 0; // Card doesn't do 3.3V + + //printf("OCR = %x %x %x %x\n",response[0],response[1],response[2],response[3]); + + // Set blocklen here + sd_packarg(argument,SD_BLOCKLEN); + if(sd_send_command(SD_CMD16,SD_CMD16_R,response,argument)==0) + return 0; // Set Blocklen failed + + // Reset back to high speed + sdspi_regs->clkdiv = 4; + //puts("finished init\n"); + return 1; +} + +int sd_send_command(unsigned char cmd,unsigned char response_type, + unsigned char *response,unsigned char *argument) +{ + int i; + char response_length; + unsigned char tmp; + + sd_assert_cs(); + sd_send_byte((cmd & 0x3F) | 0x40); + for(i=3;i>=0;i--) + sd_send_byte(argument[i]); + sd_send_byte(SD_CRC); // Always the same + + response_length = 0; + switch(response_type) + { + case SD_R1: + case SD_R1B: + response_length = 1; + break; + case SD_R2: + response_length = 2; + break; + case SD_R3: + response_length = 5; + break; + default: + break; + } + + // Wait for a response, which will have a 0 start bit + i = 0; + do + { + tmp = sd_rcv_byte(); + i++; + } + while(((tmp & 0x80) != 0) && i < SD_CMD_TIMEOUT); + + if(i>= SD_CMD_TIMEOUT) + { + sd_deassert_cs(); + //puts("cmd send timeout\n"); + return 0; + } + + for(i=response_length-1; i>=0; i--) + { + response[i] = tmp; + tmp = sd_rcv_byte(); + } + i = 0; + if(response_type == SD_R1B) + { + do + { + i++; + tmp = sd_rcv_byte(); + } + while(tmp != SD_IDLE); + sd_send_byte(SD_IDLE); + } + + //puts("send cmd success\n"); + sd_deassert_cs(); + return 1; +} + +int +sd_read_block (unsigned int blockaddr, unsigned char *buf) +{ + unsigned char response[5]; + unsigned char argument[4]; + unsigned int i = 0; + unsigned char tmp; + + blockaddr <<= SD_BLOCKLEN_NBITS; + sd_packarg(argument,blockaddr); + if(sd_send_command(SD_CMD17,SD_CMD17_R,response,argument)==0) + return 0; //Failed READ; + if(response[0] != 0) + return 0; //Misaligned READ + + sd_assert_cs(); + i = 0; + do + { + tmp = sd_rcv_byte(); + i++; + } + while((tmp == 0xFF) && (i < SD_RD_TIMEOUT)); + if((i>= SD_RD_TIMEOUT) ||((tmp & SD_MSK_TOK_DATAERROR) == 0)) + { + sd_send_byte(SD_IDLE); // Send a dummy before quitting + return 0; // Data ERROR + } + for(i=0;i<SD_BLOCKLEN;i++) + buf[i] = sd_rcv_byte(); + return 1; + +} + +int +sd_write_block(unsigned int blockaddr, const unsigned char *buf) +{ + // FIXME not implemented yet + return 0; +} diff --git a/firmware/zpu/usrp2/sd.h b/firmware/zpu/usrp2/sd.h new file mode 100644 index 000000000..e4b4aae8b --- /dev/null +++ b/firmware/zpu/usrp2/sd.h @@ -0,0 +1,122 @@ +/* -*- c -*- */ +/* + * Copyright 2008-2011 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_SD_H +#define INCLUDED_SD_H + +#include "memory_map.h" + +#define SD_READY 1 +#define SD_IDLE_WAIT_MAX 100 +#define SD_CMD_TIMEOUT 100 +#define SD_RD_TIMEOUT 1000 + +#define SD_CMD0 0 +#define SD_CMD1 1 +#define SD_CMD9 9 +#define SD_CMD10 10 +#define SD_CMD12 12 +#define SD_CMD13 13 +#define SD_CMD16 16 +#define SD_CMD17 17 +#define SD_CMD18 18 +#define SD_CMD24 24 +#define SD_CMD25 25 +#define SD_CMD27 27 +#define SD_CMD28 28 +#define SD_CMD29 29 +#define SD_CMD30 30 +#define SD_CMD32 32 +#define SD_CMD33 33 +#define SD_CMD38 38 +#define SD_CMD55 55 +#define SD_CMD58 58 +#define SD_CMD59 59 +#define SD_ACMD41 41 +#define SD_IDLE 0xFF +#define SD_CRC 0x95 + +#define SD_R1 1 +#define SD_R1B 2 +#define SD_R2 3 +#define SD_R3 4 + +#define SD_CMD0_R SD_R1 +#define SD_CMD16_R SD_R1 +#define SD_CMD17_R SD_R1 +#define SD_CMD55_R SD_R1 +#define SD_ACMD41_R SD_R1 +#define SD_CMD58_R SD_R3 + +#define SD_BLOCKLEN 512 +#define SD_BLOCKLEN_NBITS 9 + +#define SD_MSK_IDLE 0x01 +#define SD_MSK_OCR_33 0xC0 +#define SD_MSK_TOK_DATAERROR 0xE0 + + +int sd_init(void); + +static inline void +sd_assert_cs(void) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; + sdspi_regs->status = 1; +} + +static inline void +sd_deassert_cs(void) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; + sdspi_regs->status = 0; +} + +static inline char +sd_rcv_byte(void) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; + sdspi_regs->send_dat = SD_IDLE; + while(sdspi_regs->status != SD_READY) + ; + return sdspi_regs-> receive_dat; +} + +static inline void +sd_send_byte(char dat) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; // Wait for status = 1 (ready) + sdspi_regs->send_dat = dat; +} + + +int sd_send_command(unsigned char cmd,unsigned char response_type, + unsigned char *response,unsigned char *argument); + +int sd_read_block (unsigned int blockaddr, unsigned char *buf); +int sd_write_block(unsigned int blockaddr, const unsigned char *buf); + +#endif /* INCLUDED_SD_H */ |