diff options
Diffstat (limited to 'firmware/zpu/usrp2/sd.c')
| -rw-r--r-- | firmware/zpu/usrp2/sd.c | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/firmware/zpu/usrp2/sd.c b/firmware/zpu/usrp2/sd.c new file mode 100644 index 000000000..d634baea8 --- /dev/null +++ b/firmware/zpu/usrp2/sd.c @@ -0,0 +1,197 @@ +/* -*- c -*- */ +/* + * Copyright 2008-2011 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "sd.h" +#include "memory_map.h" +#include "stdint.h" +#include "stdio.h" + +static inline void +sd_packarg(unsigned char *argument,unsigned int value) +{ + argument[3] = (unsigned char)(value >> 24); + argument[2] = (unsigned char)(value >> 16); + argument[1] = (unsigned char)(value >> 8); + argument[0] = (unsigned char)(value); +} + +int +sd_init(void) +{ + unsigned char response[5]; + unsigned char argument[4]; + int i,j; + + for(i=0;i<4;i++) + argument[i] = 0; + + // Set clock to less than 400 kHz to start out + sdspi_regs->clkdiv = 128; + + // Delay at least 74 cycles + sd_assert_cs(); + for(i = 0; i < 100; i++) + sd_send_byte(SD_IDLE); + sd_deassert_cs(); + + // Initialization Sequence -- CMD0 CMD55 ACMD41 CMD58 + // Put card in idle state + if(sd_send_command(SD_CMD0,SD_CMD0_R,response,argument)==0) + return 0; // Something went wrong in command + + j = 0; + do { + j++; + if(sd_send_command(SD_CMD55,SD_CMD55_R,response,argument)==1) + sd_send_command(SD_ACMD41,SD_ACMD41_R,response,argument); + else + j = SD_IDLE_WAIT_MAX; + } + while(((response[0] & SD_MSK_IDLE) == SD_MSK_IDLE) && (j < SD_IDLE_WAIT_MAX)); + + if(j>= SD_IDLE_WAIT_MAX) // IDLE timeout exceeded, card asleep + return 0; + + // CMD58 reads the SD card capabilities + if(sd_send_command(SD_CMD58,SD_CMD58_R,response,argument)==0) + return 0; // CMD58 FAIL + + if((response[2] & SD_MSK_OCR_33) != SD_MSK_OCR_33) + return 0; // Card doesn't do 3.3V + + //printf("OCR = %x %x %x %x\n",response[0],response[1],response[2],response[3]); + + // Set blocklen here + sd_packarg(argument,SD_BLOCKLEN); + if(sd_send_command(SD_CMD16,SD_CMD16_R,response,argument)==0) + return 0; // Set Blocklen failed + + // Reset back to high speed + sdspi_regs->clkdiv = 4; + //puts("finished init\n"); + return 1; +} + +int sd_send_command(unsigned char cmd,unsigned char response_type, + unsigned char *response,unsigned char *argument) +{ + int i; + char response_length; + unsigned char tmp; + + sd_assert_cs(); + sd_send_byte((cmd & 0x3F) | 0x40); + for(i=3;i>=0;i--) + sd_send_byte(argument[i]); + sd_send_byte(SD_CRC); // Always the same + + response_length = 0; + switch(response_type) + { + case SD_R1: + case SD_R1B: + response_length = 1; + break; + case SD_R2: + response_length = 2; + break; + case SD_R3: + response_length = 5; + break; + default: + break; + } + + // Wait for a response, which will have a 0 start bit + i = 0; + do + { + tmp = sd_rcv_byte(); + i++; + } + while(((tmp & 0x80) != 0) && i < SD_CMD_TIMEOUT); + + if(i>= SD_CMD_TIMEOUT) + { + sd_deassert_cs(); + //puts("cmd send timeout\n"); + return 0; + } + + for(i=response_length-1; i>=0; i--) + { + response[i] = tmp; + tmp = sd_rcv_byte(); + } + i = 0; + if(response_type == SD_R1B) + { + do + { + i++; + tmp = sd_rcv_byte(); + } + while(tmp != SD_IDLE); + sd_send_byte(SD_IDLE); + } + + //puts("send cmd success\n"); + sd_deassert_cs(); + return 1; +} + +int +sd_read_block (unsigned int blockaddr, unsigned char *buf) +{ + unsigned char response[5]; + unsigned char argument[4]; + unsigned int i = 0; + unsigned char tmp; + + blockaddr <<= SD_BLOCKLEN_NBITS; + sd_packarg(argument,blockaddr); + if(sd_send_command(SD_CMD17,SD_CMD17_R,response,argument)==0) + return 0; //Failed READ; + if(response[0] != 0) + return 0; //Misaligned READ + + sd_assert_cs(); + i = 0; + do + { + tmp = sd_rcv_byte(); + i++; + } + while((tmp == 0xFF) && (i < SD_RD_TIMEOUT)); + if((i>= SD_RD_TIMEOUT) ||((tmp & SD_MSK_TOK_DATAERROR) == 0)) + { + sd_send_byte(SD_IDLE); // Send a dummy before quitting + return 0; // Data ERROR + } + for(i=0;i<SD_BLOCKLEN;i++) + buf[i] = sd_rcv_byte(); + return 1; + +} + +int +sd_write_block(unsigned int blockaddr, const unsigned char *buf) +{ + // FIXME not implemented yet + return 0; +} |