diff options
Diffstat (limited to 'firmware/zpu/lib/ethernet.h')
-rw-r--r-- | firmware/zpu/lib/ethernet.h | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/firmware/zpu/lib/ethernet.h b/firmware/zpu/lib/ethernet.h new file mode 100644 index 000000000..b5b08cb8c --- /dev/null +++ b/firmware/zpu/lib/ethernet.h @@ -0,0 +1,100 @@ +/* + * Copyright 2010-2012 Ettus Research LLC + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_ETHERNET_H +#define INCLUDED_ETHERNET_H + +#include <net/eth_mac_addr.h> +#include <lwip/ip_addr.h> +#include <stdbool.h> + +typedef void (*ethernet_link_changed_callback_t)(int speed); + + +/*! + * \brief one time call to initialize ethernet + */ +void ethernet_init(void); + +/*! + * \brief Specify the function to call on link state changes. + * + * When the link comes up, speed is the link speed in Mbit/s. + * When the link goes down, speed is 0. + */ +void ethernet_register_link_changed_callback(ethernet_link_changed_callback_t cb); + +/*! + * \returns ethernet MAC address + */ +const eth_mac_addr_t *ethernet_mac_addr(void); + +/*! + * \returns IP address + */ +const struct ip_addr *get_ip_addr(void); + +/*! + * \returns gateway address + */ +const struct ip_addr *get_gateway(void); + +/*! + * \returns subnet address + */ +const struct ip_addr *get_subnet(void); + +/*! + * \brief write ip address to eeprom and begin using it + */ +bool set_ip_addr(const struct ip_addr *t); + +//! Apply default settings to eth addrs +void eth_addrs_set_default(void); + +/* + * \brief read RMON regs and return error mask + */ +int ethernet_check_errors(void); + +#define RME_RX_CRC 0x0001 +#define RME_RX_FIFO_FULL 0x0002 +#define RME_RX_2SHORT_2LONG 0x0004 + +#define RME_TX_JAM_DROP 0x0010 +#define RME_TX_FIFO_UNDER 0x0020 +#define RME_TX_FIFO_OVER 0x0040 + + +typedef enum { LS_UNKNOWN, LS_DOWN, LS_UP } eth_link_state_t; + +// flow control bitmasks +#define FC_NONE 0x0 +#define FC_WE_TX 0x1 // we send PAUSE frames +#define FC_WE_RX 0x2 // we honor received PAUSE frames +#define FC_SYMM (FC_WE_TX | FC_WE_RX) + +#define S_UNKNOWN (-1) // unknown link speed + +typedef struct { + eth_link_state_t link_state; + int link_speed; // in Mb/s + int flow_control; +} ethernet_t; + +#endif /* INCLUDED_ETHERNET_H */ |