diff options
Diffstat (limited to 'firmware/zpu/apps/cruft/tx_standalone.c')
| -rw-r--r-- | firmware/zpu/apps/cruft/tx_standalone.c | 339 |
1 files changed, 339 insertions, 0 deletions
diff --git a/firmware/zpu/apps/cruft/tx_standalone.c b/firmware/zpu/apps/cruft/tx_standalone.c new file mode 100644 index 000000000..1645fa8ba --- /dev/null +++ b/firmware/zpu/apps/cruft/tx_standalone.c @@ -0,0 +1,339 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "memcpy_wa.h" +#include "dbsm.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + +#define _AL4 __attribute__((aligned (4))) + +#define USE_BUFFER_INTERRUPT 0 // 0 or 1 + + +static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz + +/* + * This program can respond to queries from the host + * and stream rx samples. + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu +#define CPU_TX_BUF 1 // cpu -> eth + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + + +/* + * ================================================================ + * configure DSP RX double buffering state machine + * ================================================================ + */ + + +// 4 lines of ethernet hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE 5 +#define DSP_RX_SAMPLES_PER_FRAME 128 +#define DSP_RX_EXTRA_LINES 1 // writes timestamp + +// Receive from DSP Rx +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ethernet +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from last_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + +/* + * ================================================================ + * configure DSP TX double buffering state machine + * ================================================================ + */ + +// 4 lines of ethernet hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE 4 +#define DSP_TX_SAMPLES_PER_FRAME 250 // not used except w/ debugging +#define DSP_TX_EXTRA_LINES 2 // reads word0 + timestamp + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past ethernet header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * send constant buffer to DSP TX + */ +static inline void +SEND_CONST_TO_DSP_TX(void) +{ + bp_send_from_buf(DSP_TX_BUF_0, PORT_DSP, 1, + DSP_TX_FIRST_LINE, + DSP_TX_FIRST_LINE + DSP_TX_EXTRA_LINES + DSP_TX_SAMPLES_PER_FRAME - 1); +} + +// ---------------------------------------------------------------- + + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +void link_changed_callback(int speed); +static volatile bool link_is_up = false; // eth handler sets this + + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout +} + +// Tx DSP underrun +void +underrun_irq_handler(unsigned irq) +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + dbsm_stop(&dsp_tx_sm); + + // FIXME anything else? + + putstr("\nirq: underrun\n"); +} + +// Rx DSP overrun +void +overrun_irq_handler(unsigned irq) +{ + dsp_rx_regs->clear_state = 1; + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); + dbsm_stop(&dsp_rx_sm); + + // FIXME anything else? + + putstr("\nirq: overrun\n"); +} + +static void +start_tx_transfers(void) +{ + bp_clear_buf(DSP_TX_BUF_0); // FIXME, really goes in state machine + bp_clear_buf(DSP_TX_BUF_1); + + // fill everything with a constant 32k + 0j + + uint32_t const_sample = (32000 << 16) | 0; + int i; + for (i = 0; i < BP_NLINES; i++){ + buffer_ram(DSP_TX_BUF_0)[i] = const_sample; + buffer_ram(DSP_TX_BUF_1)[i] = const_sample; + } + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + //pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, + U2P_TX_IMMEDIATE | U2P_TX_START_OF_BURST, 0); + u2p_set_timestamp(&pkt.fixed, T_NOW); + + memcpy_wa(buffer_ram(DSP_TX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_TX_BUF_1), &pkt, sizeof(pkt)); + + + int tx_scale = 256; + + // setup Tx DSP regs + dsp_tx_regs->clear_state = 1; // reset + dsp_tx_regs->freq = 408021893; // 9.5 MHz [2**32 * fc/fsample] + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = 32; + + // kick off the state machine + // dbsm_start(&dsp_rx_sm); + + SEND_CONST_TO_DSP_TX(); // send constant buffer to DSP TX +} + + +void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + if (0){ + putstr("irq: "); + puthex32(status); + putchar('\n'); + } + + if (status & BPS_ERROR_ALL){ + // FIXME rare path, handle error conditions + } + + if (status & BPS_DONE(DSP_TX_BUF_0)){ + bp_clear_buf(DSP_TX_BUF_0); + SEND_CONST_TO_DSP_TX(); + hal_toggle_leds(0x1); + } + +} + +int +main(void) +{ + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\ntx_only\n"); + + // Control LEDs + hal_set_leds(0x0, 0x3); + + if (USE_BUFFER_INTERRUPT) + pic_register_handler(IRQ_BUFFER, buffer_irq_handler); + + pic_register_handler(IRQ_OVERRUN, overrun_irq_handler); + pic_register_handler(IRQ_UNDERRUN, underrun_irq_handler); + + //pic_register_handler(IRQ_TIMER, timer_irq_handler); + //hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + + ethernet_init(); + + // initialize double buffering state machine for DSP RX -> Ethernet + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + + // setup receive from ETH + // bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); + +#if 0 + if (hwconfig_simulation_p()){ + // If we're simulating, pretend that we got a start command from the host + eth_mac_addr_t host = {{ 0x00, 0x0A, 0xE4, 0x3E, 0xD2, 0xD5 }}; + start_rx_cmd(&host); + } +#endif + + start_tx_transfers(); // send constant buffers to DSP TX + + while(1){ + if (!USE_BUFFER_INTERRUPT) + buffer_irq_handler(0); + } +} + +// ---------------------------------------------------------------- + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + link_is_up = true; + break; + + case 100: + v = LS_100; + link_is_up = true; + break; + + case 1000: + v = LS_100; + link_is_up = true; + break; + + default: + v = 0; + link_is_up = false; + break; + } + + //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + // hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2); + + printf("\neth link changed: speed = %d\n", speed); +} |