diff options
Diffstat (limited to 'firmware/usrp3')
| -rwxr-xr-x | firmware/usrp3/x300/x300_aurora_bist.py | 40 |
1 files changed, 16 insertions, 24 deletions
diff --git a/firmware/usrp3/x300/x300_aurora_bist.py b/firmware/usrp3/x300/x300_aurora_bist.py index f5e119b66..5f7a22a3b 100755 --- a/firmware/usrp3/x300/x300_aurora_bist.py +++ b/firmware/usrp3/x300/x300_aurora_bist.py @@ -43,8 +43,9 @@ SFP_TYPE_AURORA = 2 MAC_REG_CTRL = 0 MAC_REG_STATUS = 0 MAC_REG_OVERRUNS = 4 -MAC_REG_BIST_SAMPS = 8 -MAC_REG_BIST_ERRORS = 12 +MAC_REG_CHECKSUM_ERRS = 8 +MAC_REG_BIST_SAMPS = 12 +MAC_REG_BIST_ERRORS = 16 MAC_STATUS_LINK_UP_MSK = 0x00000001 MAC_STATUS_HARD_ERR_MSK = 0x00000002 @@ -52,19 +53,16 @@ MAC_STATUS_SOFT_ERR_MSK = 0x00000004 MAC_STATUS_BIST_LOCKED_MSK = 0x00000008 MAC_STATUS_BIST_LATENCY_MSK = 0x000FFFF0 MAC_STATUS_BIST_LATENCY_OFFSET = 4 -MAC_STATUS_CHECKSUM_ERRS_MSK = 0xFFF00000 -MAC_STATUS_CHECKSUM_ERRS_OFFSET = 20 MAC_CTRL_BIST_CHECKER_EN = 0x00000001 MAC_CTRL_BIST_GEN_EN = 0x00000002 MAC_CTRL_BIST_LOOPBACK_EN = 0x00000004 -MAC_CTRL_PHY_RESET = 0x00000100 -MAC_CTRL_BIST_RATE_MSK = 0x000000F8 +MAC_CTRL_PHY_RESET = 0x00000200 +MAC_CTRL_BIST_RATE_MSK = 0x000001F8 MAC_CTRL_BIST_RATE_OFFSET = 3 -AURORA_CLK_RATE = 156.25e6 BUS_CLK_RATE = 166.66e6 -BIST_MAX_TIME_LIMIT = math.floor(pow(2,48)/AURORA_CLK_RATE)-1 +BIST_MAX_TIME_LIMIT = math.floor(pow(2,48)/BUS_CLK_RATE)-1 ######################################################################## # utils @@ -83,10 +81,11 @@ def get_aurora_info(ctrl): return (aur_port, link_up) def get_rate_setting(rate): - for div in range(2,32): - if (rate < 8e-6 * BUS_CLK_RATE * (1.0 - 1.0/div)): - return (div-1, 8e-6 * BUS_CLK_RATE * (1.0 - 1.0/(div-1))) - return (0, 8e-6 * BUS_CLK_RATE) + RATE_RES_BITS = 6 + rate_sett = int((1.0*rate/(8e-6*BUS_CLK_RATE))*pow(2, RATE_RES_BITS))-1 # Round rate down + rate_sett = numpy.clip(rate_sett, 0, pow(2, RATE_RES_BITS)-1) + coerced_rate = ((1.0+rate_sett)/pow(2, RATE_RES_BITS))*(8e-6*BUS_CLK_RATE) + return (rate_sett, coerced_rate) def run_ber_loopback_bist(ctrls, duration, rate_tuple): (rate_sett, rate) = rate_tuple @@ -107,10 +106,7 @@ def run_ber_loopback_bist(ctrls, duration, rate_tuple): # Put the slave in loopback mode and the master in BIST mode if 'slave' in ctrls: ctrls['slave'].poke(SLA_MAC_REG_BASE + MAC_REG_CTRL, MAC_CTRL_BIST_LOOPBACK_EN) - if rate_sett == 0: - master_ctrl = MAC_CTRL_BIST_GEN_EN|MAC_CTRL_BIST_CHECKER_EN - else: - master_ctrl = ((rate_sett - 1) << MAC_CTRL_BIST_RATE_OFFSET)|MAC_CTRL_BIST_GEN_EN|MAC_CTRL_BIST_CHECKER_EN + master_ctrl = (rate_sett<<MAC_CTRL_BIST_RATE_OFFSET)|MAC_CTRL_BIST_GEN_EN|MAC_CTRL_BIST_CHECKER_EN ctrls['master'].poke(MST_MAC_REG_BASE + MAC_REG_CTRL, master_ctrl) start_time = datetime.datetime.now() # Wait and check if BIST locked @@ -153,7 +149,7 @@ def run_ber_loopback_bist(ctrls, duration, rate_tuple): print('[INFO] BIST Complete!') print('- Elapsed Time = ' + str(time_diff)) print('- Max BER (Bit Error Ratio) = %.4g (%d errors out of %d)'%((mst_errors+1)/mst_samps,mst_errors,mst_samps)) - print('- Max Roundtrip Latency = %.1fus'%(1e6*mst_latency_cyc/AURORA_CLK_RATE)) + print('- Max Roundtrip Latency = %.1fus'%(1e6*mst_latency_cyc/BUS_CLK_RATE)) print('- Approx Throughput = %.0fMB/s'%((8e-6*mst_samps)/time_diff.total_seconds())) else: print('[ERROR] BIST Failed!') @@ -187,10 +183,7 @@ def run_latency_loopback_bist(ctrls, duration, rate_tuple): # Put the slave in loopback mode and the master in BIST mode if 'slave' in ctrls: ctrls['slave'].poke(SLA_MAC_REG_BASE + MAC_REG_CTRL, MAC_CTRL_BIST_LOOPBACK_EN) - if rate_sett == 0: - master_ctrl = MAC_CTRL_BIST_GEN_EN|MAC_CTRL_BIST_CHECKER_EN - else: - master_ctrl = ((rate_sett - 1) << MAC_CTRL_BIST_RATE_OFFSET)|MAC_CTRL_BIST_GEN_EN|MAC_CTRL_BIST_CHECKER_EN + master_ctrl = (rate_sett<<MAC_CTRL_BIST_RATE_OFFSET)|MAC_CTRL_BIST_GEN_EN|MAC_CTRL_BIST_CHECKER_EN start_time = datetime.datetime.now() latencies = [] @@ -216,7 +209,7 @@ def run_latency_loopback_bist(ctrls, duration, rate_tuple): ctrls['master'].poke(MST_MAC_REG_BASE + MAC_REG_CTRL, 0) # Compure latency mst_latency_cyc = 16.0*((mst_status & MAC_STATUS_BIST_LATENCY_MSK) >> MAC_STATUS_BIST_LATENCY_OFFSET) - mst_latency_us = 1e6*mst_latency_cyc/AURORA_CLK_RATE + mst_latency_us = 1e6*mst_latency_cyc/BUS_CLK_RATE latencies.append(mst_latency_us) except KeyboardInterrupt: print('[WARNING] Operation cancelled by user.') @@ -233,7 +226,7 @@ def run_latency_loopback_bist(ctrls, duration, rate_tuple): print('- Elapsed Time = ' + str(stop_time - start_time)) print('- Roundtrip Latency Mean = %.2fus'%(numpy.mean(latencies))) print('- Roundtrip Latency Stdev = %.2fus'%(numpy.std(latencies))) - # Turn off BIST loopback + # Turn off BIST loopback time.sleep(0.5) if 'slave' in ctrls: ctrls['slave'].poke(SLA_MAC_REG_BASE + MAC_REG_CTRL, 0) @@ -304,4 +297,3 @@ if __name__=='__main__': run_ber_loopback_bist(ctrls, options.duration, get_rate_setting(options.rate)) else: run_latency_loopback_bist(ctrls, options.duration, get_rate_setting(options.rate)) - |