diff options
Diffstat (limited to 'firmware/usrp3/x300')
| -rw-r--r-- | firmware/usrp3/x300/x300_init.c | 21 | ||||
| -rw-r--r-- | firmware/usrp3/x300/x300_main.c | 6 |
2 files changed, 14 insertions, 13 deletions
diff --git a/firmware/usrp3/x300/x300_init.c b/firmware/usrp3/x300/x300_init.c index 66fb120f3..480e68a14 100644 --- a/firmware/usrp3/x300/x300_init.c +++ b/firmware/usrp3/x300/x300_init.c @@ -7,7 +7,7 @@ #include <wb_i2c.h> #include <stdint.h> #include <stdbool.h> -#include <printf.h> +#include <trace.h> #include <wb_pkt_iface64.h> #include <u3_net_stack.h> #include <link_state_route_proto.h> @@ -73,7 +73,6 @@ const void *pick_inited_field(const void *eeprom, const void *def, const size_t static void init_network(void) { pkt_config = wb_pkt_iface64_init(PKT_RAM0_BASE, 0x1ffc); - printf("PKT RAM0 BASE 0x%x\n", (&pkt_config)->base); u3_net_stack_init(&pkt_config); link_state_route_proto_init(); @@ -115,7 +114,9 @@ static void init_network(void) static void putc(void *p, char c) { -#ifdef X300_DEBUG_UART +//If FW_TRACE_LEVEL is defined, then the trace level is set +//to a non-zero number. Turn on the debug UART to enable tracing +#ifdef UHD_FW_TRACE_LEVEL wb_uart_putc(UART1_BASE, c); #endif } @@ -129,7 +130,7 @@ void x300_init(void) //udp_uart_init(UART0_BASE, X300_GPSDO_UDP_PORT); //now we can init the rest with prints - printf("X300 ZPU Init Begin -- CPU CLOCK is %d MHz\n", CPU_CLOCK/1000000); + UHD_FW_TRACE_FSTR(INFO, "[ZPU Init Begin -- CPU CLOCK is %d MHz]", (CPU_CLOCK/1000000)); //i2c rate init wb_i2c_init(I2C0_BASE, CPU_CLOCK); @@ -139,8 +140,8 @@ void x300_init(void) //hold phy in reset wb_poke32(SR_ADDR(SET0_BASE, SR_SW_RST), SW_RST_PHY); - printf("DEBUG: eth0 is %2dG\n",(wb_peek32(SR_ADDR(RB0_BASE, RB_ETH_TYPE0))==1) ? 10 : 1); - printf("DEBUG: eth1 is %2dG\n",(wb_peek32(SR_ADDR(RB0_BASE, RB_ETH_TYPE1))==1) ? 10 : 1); + UHD_FW_TRACE_FSTR(INFO, "eth0 is %2dG", ((wb_peek32(SR_ADDR(RB0_BASE, RB_ETH_TYPE0))==1) ? 10 : 1)); + UHD_FW_TRACE_FSTR(INFO, "eth1 is %2dG", ((wb_peek32(SR_ADDR(RB0_BASE, RB_ETH_TYPE1))==1) ? 10 : 1)); //setup net stack and eth state machines init_network(); @@ -160,9 +161,9 @@ void x300_init(void) //print network summary for (uint8_t e = 0; e < ethernet_ninterfaces(); e++) { - printf(" MAC%u: %s\n", (int)e, mac_addr_to_str(u3_net_stack_get_mac_addr(e))); - printf(" IP%u: %s\n", (int)e, ip_addr_to_str(u3_net_stack_get_ip_addr(e))); - printf(" SUBNET%u: %s\n", (int)e, ip_addr_to_str(u3_net_stack_get_subnet(e))); - printf(" BCAST%u: %s\n", (int)e, ip_addr_to_str(u3_net_stack_get_bcast(e))); + UHD_FW_TRACE_FSTR(INFO, " MAC%u: %s", (int)e, mac_addr_to_str(u3_net_stack_get_mac_addr(e))); + UHD_FW_TRACE_FSTR(INFO, " IP%u: %s", (int)e, ip_addr_to_str(u3_net_stack_get_ip_addr(e))); + UHD_FW_TRACE_FSTR(INFO, " SUBNET%u: %s", (int)e, ip_addr_to_str(u3_net_stack_get_subnet(e))); + UHD_FW_TRACE_FSTR(INFO, " BCAST%u: %s", (int)e, ip_addr_to_str(u3_net_stack_get_bcast(e))); } } diff --git a/firmware/usrp3/x300/x300_main.c b/firmware/usrp3/x300/x300_main.c index d865e1d09..b8c4fb41a 100644 --- a/firmware/usrp3/x300/x300_main.c +++ b/firmware/usrp3/x300/x300_main.c @@ -13,7 +13,7 @@ #include <udp_uart.h> #include <u3_net_stack.h> #include <link_state_route_proto.h> -#include <printf.h> +#include <trace.h> #include <string.h> #include <print_addrs.h> @@ -33,7 +33,7 @@ void program_udp_framer( const eth_mac_addr_t *dst_mac = u3_net_stack_arp_cache_lookup(dst_ip); const size_t ethbase = (ethno == 0)? SR_ETHINT0 : SR_ETHINT1; const size_t vdest = (sid >> 16) & 0xff; - printf("handle_udp_prog_framer sid %u vdest %u\n", sid, vdest); + UHD_FW_TRACE_FSTR(INFO, "handle_udp_prog_framer sid %u vdest %u\n", sid, vdest); //setup source framer const eth_mac_addr_t *src_mac = u3_net_stack_get_mac_addr(ethno); @@ -204,7 +204,7 @@ void handle_udp_mtu_detect( if (buff == NULL) { return; } else if (!(request->flags & X300_MTU_DETECT_ECHO_REQUEST)) { - printf("DEBUG: MTU detect got unknown request\n"); + UHD_FW_TRACE(WARN, "MTU detect got unknown request"); reply.flags |= X300_MTU_DETECT_ERROR; } |