2 files changed, 155 insertions, 0 deletions
diff --git a/firmware/octoclock/octoclock_r4/CMakeLists.txt b/firmware/octoclock/octoclock_r4/CMakeLists.txt
new file mode 100644
index 000000000..c3559d8d4
--- /dev/null
+++ b/firmware/octoclock/octoclock_r4/CMakeLists.txt
@@ -0,0 +1,50 @@
+#
+# Copyright 2014 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+add_executable(octoclock_r4_fw.elf octoclock_r4_main.c)
+target_link_libraries(octoclock_r4_fw.elf octoclock)
+set_target_properties(octoclock_r4_fw.elf PROPERTIES
+    LINK_FLAGS "-Wl,--relax,-Map=octoclock_r4_fw.map,--cref"
+)
+
+add_custom_command(
+    OUTPUT ${CMAKE_BINARY_DIR}/octoclock_r4_fw.bin
+    DEPENDS octoclock_r4_fw.elf
+    COMMENT "Generating octoclock_r4_fw.bin"
+    COMMAND ${AVR_OBJCOPY} -O binary ${CMAKE_CURRENT_BINARY_DIR}/octoclock_r4_fw.elf ${CMAKE_BINARY_DIR}/octoclock_r4_fw.bin
+)
+add_custom_target(
+    octoclock_r4_fw_bin ALL
+    DEPENDS ${CMAKE_BINARY_DIR}/octoclock_r4_fw.bin
+)
+add_custom_command(
+    OUTPUT ${CMAKE_BINARY_DIR}/octoclock_r4_fw.hex
+    DEPENDS octoclock_r4_fw.elf
+    COMMENT "Generating octoclock_r4_fw.hex"
+    COMMAND ${AVR_OBJCOPY} -O ihex ${CMAKE_CURRENT_BINARY_DIR}/octoclock_r4_fw.elf ${CMAKE_BINARY_DIR}/octoclock_r4_fw.hex
+)
+add_custom_target(
+    octoclock_r4_fw_hex ALL
+    DEPENDS ${CMAKE_BINARY_DIR}/octoclock_r4_fw.hex
+)
+add_custom_target(
+    upload_r4
+    ${AVRDUDE} -p atmega128 -c ${PROGRAMMER} -P usb -U efuse:w:0xFF:m -U hfuse:w:0x81:m -U lfuse:w:0xFF:m -U flash:w:octoclock_r4_fw.hex:i
+    WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+    DEPENDS octoclock_r4_fw_hex
+    COMMENT "Uploading OctoClock firmware to device with ${PROGRAMMER}"
+)
diff --git a/firmware/octoclock/octoclock_r4/octoclock_r4_main.c b/firmware/octoclock/octoclock_r4/octoclock_r4_main.c
new file mode 100644
index 000000000..5e8e6d09b
--- /dev/null
+++ b/firmware/octoclock/octoclock_r4/octoclock_r4_main.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2013-2014 Ettus Research LLC
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * Welcome to the firmware code for the USRP Octoclock accessory product!
+ *
+ * Notes regarding this firmware:
+ *      NOT in M103 compatibility mode
+ *      CKOPT full rail-to-rail
+ *      xtal osc
+ *      16K CK (16K clock cycles)
+ *      additional delay 65ms for Crystal Oscillator
+ *      slowly rising power
+ *      persistent EEPROM
+ *
+ * These settings are very conservative. If a lower power oscillator is
+ * required, change CKOPT to '1' (UNPROGRAMMED).
+ *
+ * M103C     = [ ]
+ * WDTON     = [ ]
+ * OCDEN     = [ ]
+ * JTAGEN    = [X]
+ * SPIEN     = [X]
+ * EESAVE    = [X]
+ * BOOTSZ    = 4096W_F000
+ * BOOTRST   = [ ]
+ * CKOPT     = [X]
+ * BODLEVEL  = 2V7
+ * BODEN     = [ ]
+ * SUT_CKSEL = EXTHIFXTALRES_16KCK_64MS
+ *
+ * EXTENDED  = 0xFF (valid)
+ * HIGH      = 0x81 (valid)
+ * LOW       = 0xFF (valid)
+ *
+ */
+
+#include <string.h>
+#include <stdint.h>
+#include <stdbool.h>
+
+#include <avr/eeprom.h>
+#include <avr/io.h>
+
+#include <octoclock.h>
+#include <clkdist.h>
+#include <debug.h>
+#include <state.h>
+#include <network.h>
+#include <usart.h>
+#include <gpsdo.h>
+#include <net/enc28j60.h>
+#include <net/udp_handlers.h>
+
+/*******************************************************************************
+*   Main Routine
+*******************************************************************************/
+
+int main(void){
+
+    asm("cli");
+
+    setup_atmel_io_ports();
+    network_init();
+
+    #ifndef DEBUG
+    asm("sei");
+    #endif
+
+    init_udp_listeners();
+    register_udp_listener(OCTOCLOCK_UDP_CTRL_PORT, handle_udp_ctrl_packet);
+    register_udp_listener(OCTOCLOCK_UDP_GPSDO_PORT, handle_udp_gpsdo_packet);
+
+    DEBUG_INIT(); // Does nothing when not in debug mode
+    DEBUG_LOG(" "); //Force a newline between runs
+    usart_init();
+
+    //Set initial ClkDist and front panel settings
+    led(Middle,true);
+    setup_TI_CDCE18005(Primary_GPS);    // 10 MHz from Internal Source
+
+    led(Top,true);
+    PORTA |= (1<<PA6);    // PPS from Internal source
+
+    TIMER0_INIT();
+    TIMER1_INIT();
+
+    while(true) {
+        network_check();
+    }
+}