summaryrefslogtreecommitdiffstats
path: root/firmware/microblaze
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/microblaze')
-rw-r--r--firmware/microblaze/usrp2p/memory_map.h62
1 files changed, 15 insertions, 47 deletions
diff --git a/firmware/microblaze/usrp2p/memory_map.h b/firmware/microblaze/usrp2p/memory_map.h
index 5edb3b313..51e4b9413 100644
--- a/firmware/microblaze/usrp2p/memory_map.h
+++ b/firmware/microblaze/usrp2p/memory_map.h
@@ -16,38 +16,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/* Overall Memory Map
- * 0000-FFFF 64K RAM space
- *
- * 0000-1FFF 8K Boot RAM
- * 2000-5FFF 16K Buffer pool
- * 6000-7FFF 8K Peripherals
- * 8000-FFFF 32K Main System RAM
-
-
-From u2plus_core.v:
-wb_1master #(.decode_w(8),
-.s0_addr(8'b0000_0000),.s0_mask(8'b1110_0000), // 0-8K, Boot RAM
-.s1_addr(8'b0100_0000),.s1_mask(8'b1100_0000), // 16K-32K, Buffer Pool
-.s2_addr(8'b0011_0000),.s2_mask(8'b1111_1111), // SPI 0x3000
-.s3_addr(8'b0011_0001),.s3_mask(8'b1111_1111), // I2C 0x3100
-.s4_addr(8'b0011_0010),.s4_mask(8'b1111_1111), // GPIO 0x3200
-.s5_addr(8'b0011_0011),.s5_mask(8'b1111_1111), // Readback 0x3300
-.s6_addr(8'b0011_0100),.s6_mask(8'b1111_1111), // Ethernet MAC 0x3400
-.s7_addr(8'b0010_0000),.s7_mask(8'b1111_0000), // 8-12K, Settings Bus (only uses 1K) 0x2000-0x2FFF
-.s8_addr(8'b0011_0101),.s8_mask(8'b1111_1111), // PIC 0x3500
-.s9_addr(8'b0011_0110),.s9_mask(8'b1111_1111), // Unused 0x3600
-.sa_addr(8'b0011_0111),.sa_mask(8'b1111_1111), // UART 0x3700
-.sb_addr(8'b0011_1000),.sb_mask(8'b1111_1111), // ATR 0x3800
-.sc_addr(8'b0011_1001),.sc_mask(8'b1111_1111), // Unused 0x3900
-.sd_addr(8'b0011_1010),.sd_mask(8'b1111_1111), // ICAP 0x3A00
-.se_addr(8'b0011_1011),.se_mask(8'b1111_1111), // SPI Flash 0x3B00
-.sf_addr(8'b1000_0000),.sf_mask(8'b1000_0000), // 32-64K, Main RAM 0x8000-0xFFFF
- .dw(dw),.aw(aw),.sw(sw)) wb_1master
-
- */
-
-
#ifndef INCLUDED_MEMORY_MAP_H
#define INCLUDED_MEMORY_MAP_H
@@ -88,7 +56,7 @@ wb_1master #(.decode_w(8),
/////////////////////////////////////////////////////
// SPI Core, Slave 2. See core docs for more info
-#define SPI_BASE 0x3000 // Base address (16-bit) is base peripheral addr
+#define SPI_BASE 0x6000 // Base address (16-bit) is base peripheral addr
typedef struct {
volatile uint32_t txrx0;
@@ -127,7 +95,7 @@ typedef struct {
// I2C, Slave 3
// See Wishbone I2C-Master Core Specification.
-#define I2C_BASE 0x3100
+#define I2C_BASE 0x6100
typedef struct {
volatile uint32_t prescaler_lo; // r/w
@@ -169,7 +137,7 @@ typedef struct {
//
// These go to the daughterboard i/o pins
-#define GPIO_BASE 0x3200
+#define GPIO_BASE 0x6200
typedef struct {
volatile uint32_t io; // tx data in high 16, rx in low 16
@@ -193,7 +161,7 @@ typedef struct {
// The status registers are in Slave 5, Buffer Pool Status.
// The control register is in Slave 7, Settings Bus.
-#define BUFFER_POOL_STATUS_BASE 0x3300
+#define BUFFER_POOL_STATUS_BASE 0x6300
typedef struct {
volatile uint32_t _padding[8];
@@ -236,7 +204,7 @@ hwconfig_wishbone_divisor(void)
///////////////////////////////////////////////////
// Ethernet Core, Slave 6
-#define ETH_BASE 0x3400
+#define ETH_BASE 0x6400
#include "eth_mac_regs.h"
@@ -249,11 +217,11 @@ hwconfig_wishbone_divisor(void)
// 1KB of address space (== 256 32-bit write-only regs)
-#define MISC_OUTPUT_BASE 0x2000
-#define TX_PROTOCOL_ENGINE_BASE 0x2080
-#define RX_PROTOCOL_ENGINE_BASE 0x20C0
-#define BUFFER_POOL_CTRL_BASE 0x2100
-#define LAST_SETTING_REG 0x23FC // last valid setting register
+#define MISC_OUTPUT_BASE 0x5000
+#define TX_PROTOCOL_ENGINE_BASE 0x5080
+#define RX_PROTOCOL_ENGINE_BASE 0x50C0
+#define BUFFER_POOL_CTRL_BASE 0x5100
+#define LAST_SETTING_REG 0x53FC // last valid setting register
#define SR_MISC 0
#define SR_TX_PROT_ENG 32
@@ -608,7 +576,7 @@ typedef struct {
///////////////////////////////////////////////////
// Simple Programmable Interrupt Controller, Slave 8
-#define PIC_BASE 0x3500
+#define PIC_BASE 0x6500
// Interrupt request lines
// Bit numbers (LSB == 0) that correpond to interrupts into PIC
@@ -668,7 +636,7 @@ typedef struct {
///////////////////////////////////////////////////
// UART, Slave 10
-#define UART_BASE 0x3700
+#define UART_BASE 0x6700
typedef struct {
// All elements are 8 bits except for clkdiv (16), but we use uint32 to make
@@ -686,7 +654,7 @@ typedef struct {
///////////////////////////////////////////////////
// ATR Controller, Slave 11
-#define ATR_BASE 0x3800
+#define ATR_BASE 0x6800
typedef struct {
volatile uint32_t v[16];
@@ -705,7 +673,7 @@ typedef struct {
///////////////////////////////////////////////////
// ICAP, Slave 13
-#define ICAP_BASE 0x3A00
+#define ICAP_BASE 0x6A00
typedef struct {
uint32_t icap; //only the lower 8 bits matter
} icap_regs_t;
@@ -717,7 +685,7 @@ typedef struct {
// Control register definitions are the same as SPI, so use SPI_CTRL_ASS, etc.
// Peripheral mask not needed since bus is dedicated (CE held low)
-#define SPIF_BASE 0x3B00
+#define SPIF_BASE 0x6B00
typedef struct {
volatile uint32_t txrx0;
volatile uint32_t txrx1;