diff options
Diffstat (limited to 'firmware/microblaze')
| -rw-r--r-- | firmware/microblaze/.gitignore | 45 | ||||
| -rw-r--r-- | firmware/microblaze/AUTHORS | 1 | ||||
| -rw-r--r-- | firmware/microblaze/COPYING | 674 | ||||
| -rw-r--r-- | firmware/microblaze/ChangeLog | 1 | ||||
| -rw-r--r-- | firmware/microblaze/INSTALL | 234 | ||||
| -rw-r--r-- | firmware/microblaze/Makefile.am | 29 | ||||
| -rw-r--r-- | firmware/microblaze/Makefile.common | 88 | ||||
| -rw-r--r-- | firmware/microblaze/NEWS | 0 | ||||
| -rw-r--r-- | firmware/microblaze/README | 17 | ||||
| -rwxr-xr-x | firmware/microblaze/bootstrap | 26 | ||||
| -rw-r--r-- | firmware/microblaze/configure.ac | 54 | ||||
| -rw-r--r-- | firmware/microblaze/lib/Makefile.inc | 47 | ||||
| -rw-r--r-- | firmware/microblaze/lib/net/.gitignore | 2 | ||||
| -rwxr-xr-x | firmware/microblaze/u2_flash_tool | 116 | ||||
| -rw-r--r-- | firmware/microblaze/usrp2/.gitignore | 9 | ||||
| -rw-r--r-- | firmware/microblaze/usrp2/Makefile.am | 45 | ||||
| -rw-r--r-- | firmware/microblaze/usrp2p/.gitignore | 9 | ||||
| -rw-r--r-- | firmware/microblaze/usrp2p/bootloader/.gitignore | 11 |
18 files changed, 16 insertions, 1392 deletions
diff --git a/firmware/microblaze/.gitignore b/firmware/microblaze/.gitignore index e867fe87c..796b96d1c 100644 --- a/firmware/microblaze/.gitignore +++ b/firmware/microblaze/.gitignore @@ -1,46 +1 @@ -/*-stamp -/*.a -/*.bin -/*.dump -/*.log -/*.rom -/.deps -/*.guess -/*.sub -/Makefile -/Makefile.in -/aclocal.m4 -/autom4te.cache -/blink_leds -/blink_leds2 /build -/compile -/config.h -/config.h.in -/config.log -/config.status -/configure -/depcomp -/eth_test -/gen_eth_packets -/ibs_rx_test -/ibs_tx_test -/install-sh -/libtool -/ltmain.sh -/missing -/py-compile -/rcv_eth_packets -/run_tests.sh -/stamp-h1 -/test1 -/test_phy_comm -/timer_test -/buf_ram_test -/buf_ram_zero -/hello -/configure.lineno -/configure.guess -/configure.sub -*.deps -*.o diff --git a/firmware/microblaze/AUTHORS b/firmware/microblaze/AUTHORS index c365261f8..c230624fb 100644 --- a/firmware/microblaze/AUTHORS +++ b/firmware/microblaze/AUTHORS @@ -1,3 +1,4 @@ Eric Blossom <eb@comsec.com> Matt Ettus <matt@ettus.com> Josh Blum <josh@ettus.com> +Nick Foster <nick@ettus.com> diff --git a/firmware/microblaze/COPYING b/firmware/microblaze/COPYING deleted file mode 100644 index 94a9ed024..000000000 --- a/firmware/microblaze/COPYING +++ /dev/null @@ -1,674 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - <program> Copyright (C) <year> <name of author> - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -<http://www.gnu.org/licenses/>. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -<http://www.gnu.org/philosophy/why-not-lgpl.html>. diff --git a/firmware/microblaze/ChangeLog b/firmware/microblaze/ChangeLog deleted file mode 100644 index 8b1378917..000000000 --- a/firmware/microblaze/ChangeLog +++ /dev/null @@ -1 +0,0 @@ - diff --git a/firmware/microblaze/INSTALL b/firmware/microblaze/INSTALL deleted file mode 100644 index 5458714e1..000000000 --- a/firmware/microblaze/INSTALL +++ /dev/null @@ -1,234 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006 Free Software Foundation, Inc. - -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. - -Basic Installation -================== - -Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - -You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - -Installation Names -================== - -By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - -Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: - - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - -`configure' recognizes the following options to control how it operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff --git a/firmware/microblaze/Makefile.am b/firmware/microblaze/Makefile.am deleted file mode 100644 index 52fa649c2..000000000 --- a/firmware/microblaze/Makefile.am +++ /dev/null @@ -1,29 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007,2008 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -include $(top_srcdir)/Makefile.common - -EXTRA_DIST = \ - u2_flash_tool - -SUBDIRS = \ - usrp2 \ - usrp2p \ - usrp2p/bootloader - diff --git a/firmware/microblaze/Makefile.common b/firmware/microblaze/Makefile.common deleted file mode 100644 index 4e726edab..000000000 --- a/firmware/microblaze/Makefile.common +++ /dev/null @@ -1,88 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -include $(top_srcdir)/lib/Makefile.inc - -######################################################################## -# lwIP header include dirs -######################################################################## -LWIPDIR = $(top_srcdir)/lwip/lwip-1.3.1 - -LWIP_INCLUDES = \ - -I$(top_srcdir)/lwip \ - -I$(top_srcdir)/lwip_port \ - -I$(LWIPDIR)/src/include \ - -I$(LWIPDIR)/src/include/ipv4 - -######################################################################## -# misc flags for the mb-gcc compiler -######################################################################## -MBGCC_CFLAGS = \ - --std=gnu99 -Wall -Werror-implicit-function-declaration \ - -mxl-soft-div -msoft-float -mxl-soft-mul -mxl-barrel-shift - -######################################################################## -# define for the hal io (FIXME move?) -######################################################################## -#HAL_IO = -DHAL_IO_USES_DBOARD_PINS -HAL_IO = -DHAL_IO_USES_UART - -######################################################################## -# common cflags and ldflags -######################################################################## -COMMON_CFLAGS = \ - -I$(top_srcdir)/../../host/lib/usrp \ - -I$(top_srcdir)/lib \ - $(MBGCC_CFLAGS) \ - $(LWIP_INCLUDES) \ - $(HAL_IO) - -COMMON_LFLAGS = \ - -Wl,-Map -Wl,$(@:.elf=.map) - -######################################################################## -# Common stuff for building top level microblaze images -######################################################################## -#we use COMMON_IHX_ARGS to relocate the reset and interrupt vectors to -#just below the start of code. upon creating the BIN, any leading padding -#is thrown out, so the .bin file is valid for uploading to USRP2P. this -#does not affect USRP2 because the USRP2 already starts at 0x0000, and -#because the relocate_args are not defined for USRP2's Makefile.am. -.elf.bin: - $(MB_OBJCOPY) -O binary $(RELOCATE_ARGS) $< $@ - -.elf.dump: - $(MB_OBJDUMP) -DSC $< > $@ - -.bin.rom: - $(HEXDUMP) -v -e'1/1 "%.2X\n"' $< > $@ - -.elf.ihx: - $(MB_OBJCOPY) -O ihex $(RELOCATE_ARGS) $< $@ - -_generated_from_elf = \ - $(noinst_PROGRAMS:.elf=.map) \ - $(noinst_PROGRAMS:.elf=.bin) \ - $(noinst_PROGRAMS:.elf=.dump) \ - $(noinst_PROGRAMS:.elf=.rom) \ - $(noinst_PROGRAMS:.elf=.ihx) - -noinst_DATA = $(_generated_from_elf) - -MOSTLYCLEANFILES = $(_generated_from_elf) diff --git a/firmware/microblaze/NEWS b/firmware/microblaze/NEWS deleted file mode 100644 index e69de29bb..000000000 --- a/firmware/microblaze/NEWS +++ /dev/null diff --git a/firmware/microblaze/README b/firmware/microblaze/README index 1479ffe1f..ba0aa11eb 100644 --- a/firmware/microblaze/README +++ b/firmware/microblaze/README @@ -1,3 +1,16 @@ -./bootstrap -./configure --host=mb +######################################################################## +# ZPU firmware code for USRP2 and N Series +######################################################################## +This code requires the gcc-zpu tool-chain which can be found here: + +http://opensource.zylin.com/zpudownload.html + +zpu-elf-gcc should be in your $PATH + +######################################################################## +# Run the following commands to build +######################################################################## +mkdir build +cd build +cmake ../ make diff --git a/firmware/microblaze/bootstrap b/firmware/microblaze/bootstrap deleted file mode 100755 index 26987b0ec..000000000 --- a/firmware/microblaze/bootstrap +++ /dev/null @@ -1,26 +0,0 @@ -#!/bin/sh -# -# Copyright 2010 Ettus Research LLC -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -rm -rf *.cache -rm -rf libusrp2/.deps -rm -rf libusrp2p/.deps - -aclocal -autoconf -libtoolize --automake -automake --add-missing --gnu --warnings=all diff --git a/firmware/microblaze/configure.ac b/firmware/microblaze/configure.ac deleted file mode 100644 index f6986f2dd..000000000 --- a/firmware/microblaze/configure.ac +++ /dev/null @@ -1,54 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -################################################## -## Setup Autotools -################################################## -AC_PREREQ(2.60) -AC_INIT -AM_INIT_AUTOMAKE(uhd-mb, 0) - -################################################## -## Setup Compiler -################################################## -dnl Fix 2.64 cross compile detection for AVR and RTEMS -dnl by not trying to compile fopen. -m4_if(m4_defn([m4_PACKAGE_VERSION]), [2.64], - [m4_foreach([_GCC_LANG], [C, C++, Fortran, Fortran 77], - [m4_define([_AC_LANG_IO_PROGRAM(]_GCC_LANG[)], m4_defn([AC_LANG_PROGRAM(]_GCC_LANG[)]))])]) - -AC_PROG_CC([mb-gcc]) -AM_PROG_CC_C_O -LT_INIT - -################################################## -## Setup Tools -################################################## -AC_PATH_PROG([MB_OBJCOPY], [mb-objcopy]) -AC_PATH_PROG([MB_OBJDUMP], [mb-objdump]) -AC_PATH_PROG([HEXDUMP], [hexdump]) - -################################################## -## Create Files -################################################## -AC_CONFIG_FILES([ \ - Makefile \ - usrp2p/bootloader/Makefile \ - usrp2/Makefile \ - usrp2p/Makefile \ -]) -AC_OUTPUT diff --git a/firmware/microblaze/lib/Makefile.inc b/firmware/microblaze/lib/Makefile.inc deleted file mode 100644 index d99fc4d98..000000000 --- a/firmware/microblaze/lib/Makefile.inc +++ /dev/null @@ -1,47 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -COMMON_SRCS = \ - $(top_srcdir)/lib/u2_init.c \ - $(top_srcdir)/lib/abort.c \ - $(top_srcdir)/lib/ad9510.c \ - $(top_srcdir)/lib/clocks.c \ - $(top_srcdir)/lib/eeprom.c \ - $(top_srcdir)/lib/eth_addrs.c \ - $(top_srcdir)/lib/eth_mac.c \ - $(top_srcdir)/lib/_exit.c \ - $(top_srcdir)/lib/exit.c \ - $(top_srcdir)/lib/hal_io.c \ - $(top_srcdir)/lib/hal_uart.c \ - $(top_srcdir)/lib/i2c.c \ - $(top_srcdir)/lib/mdelay.c \ - $(top_srcdir)/lib/memcpy_wa.c \ - $(top_srcdir)/lib/memset_wa.c \ - $(top_srcdir)/lib/nonstdio.c \ - $(top_srcdir)/lib/pic.c \ - $(top_srcdir)/lib/pkt_ctrl.c \ - $(top_srcdir)/lib/print_addrs.c \ - $(top_srcdir)/lib/print_rmon_regs.c \ - $(top_srcdir)/lib/print_buffer.c \ - $(top_srcdir)/lib/printf.c \ - $(top_srcdir)/lib/ihex.c \ - $(top_srcdir)/lib/spi.c \ - $(top_srcdir)/lib/net_common.c \ - $(top_srcdir)/lib/arp_cache.c \ - $(top_srcdir)/lib/banal.c diff --git a/firmware/microblaze/lib/net/.gitignore b/firmware/microblaze/lib/net/.gitignore deleted file mode 100644 index 282522db0..000000000 --- a/firmware/microblaze/lib/net/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -Makefile -Makefile.in diff --git a/firmware/microblaze/u2_flash_tool b/firmware/microblaze/u2_flash_tool deleted file mode 100755 index 2b66a4ac0..000000000 --- a/firmware/microblaze/u2_flash_tool +++ /dev/null @@ -1,116 +0,0 @@ -#!/usr/bin/env python - -import sys -from optparse import OptionParser - -SECTOR_SIZE = 512 # bytes -MAX_FILE_SIZE = 1 * (2**20) # maximum number of bytes we'll burn to a slot - -FPGA_OFFSET = 0 # offset in flash to fpga image -FIRMWARE_OFFSET = 1 * (2**20) # offset in flash to firmware image - -def read_file_data(filename): - f = open(filename, "rb") - file_data = f.read(MAX_FILE_SIZE) - t = len(file_data) % SECTOR_SIZE - if t != 0: - file_data += (SECTOR_SIZE - t)*chr(0) # pad to an even sector size w/ zeros - return file_data - - -def write_flash(offset, filename, devname): - file_data = read_file_data(filename) - dev = open(devname, "wb") - dev.seek(offset, 0) # seek to absolute byte offset - dev.write(file_data) - dev.flush() - dev.close() - return True - - -def verify_flash(offset, filename, devname): - file_data = read_file_data(filename) - dev = open(devname, "rb") - dev.seek(offset, 0) # seek to absolute byte offset - dev_data = dev.read(len(file_data)) - if len(dev_data) != len(file_data): - sys.stderr.write("short read on device %s\n" % (devname,)) - return False - - if file_data == dev_data: - return True - - # doesn't match - nwrong = 0 - for i in range(len(file_data)): - if dev_data[i] != file_data[i]: - sys.stderr.write("mismatch at offset %7d. Expected 0x%02x, got 0x%02x\n" % ( - i, ord(file_data[i]), ord(dev_data[i]))) - nwrong += 1 - if nwrong > 16: - sys.stderr.write("> 16 errors, stopping comparison\n") - break - return False - -def read_flash(offset, filename, devname): - dev = open(devname, "rb") - dev.seek(offset, 0) # seek to absolute byte offset - dev_data = dev.read(MAX_FILE_SIZE) - dev.close() - open(filename, "wb").write(dev_data) - - -def main(): - parser = OptionParser(usage="%prog: [options] filename") - parser.add_option("-w", "--write", action="store_const", const="write", dest="mode", - help="write FILE to TARGET slot") - parser.add_option("-v", "--verify", action="store_const", const="verify", dest="mode", - help="verify FILE against TARGET slot") - parser.add_option("-r", "--read", action="store_const", const="read", dest="mode", - help="read TARGET slot, write to FILE") - parser.add_option("-t", "--target", type="choice", choices=("fpga", "s/w"), default="s/w", - help="select TARGET slot from: fpga, s/w [default=%default]") - parser.add_option("", "--dev", default=None, - help="specify flash device file, e.g., /dev/sdb. Be careful!") - parser.set_defaults(target="s/w", mode=None) - - (options, args) = parser.parse_args() - if len(args) != 1: - parser.print_help() - raise SystemExit - - filename = args[0] - - if options.mode is None: - sys.stderr.write("specify mode with -w, -v or -r\n") - parser.print_help() - raise SystemExit - - if options.dev is None: - sys.stderr.write("specify the device file with --dev\n") - parser.print_help() - raise SystemExit - - offset = { "fpga" : FPGA_OFFSET, "s/w" : FIRMWARE_OFFSET }[options.target] - - if options.mode == "write": - r = (write_flash(offset, filename, options.dev) - and verify_flash(offset, filename, options.dev)) - elif options.mode == "verify": - r = verify_flash(offset, filename, options.dev) - elif options.mode == "read": - r = read_flash(offset, filename, options.dev) - else: - raise NotImplemented - - if not r: - raise SystemExit, 1 - - -if __name__ == "__main__": - main() - - - - - diff --git a/firmware/microblaze/usrp2/.gitignore b/firmware/microblaze/usrp2/.gitignore deleted file mode 100644 index 18f715618..000000000 --- a/firmware/microblaze/usrp2/.gitignore +++ /dev/null @@ -1,9 +0,0 @@ -/Makefile -/Makefile.in -/*.a -/*.bin -/*.dump -/*.ihx -/*.elf -/*.rom -/*.map diff --git a/firmware/microblaze/usrp2/Makefile.am b/firmware/microblaze/usrp2/Makefile.am deleted file mode 100644 index 7fd353204..000000000 --- a/firmware/microblaze/usrp2/Makefile.am +++ /dev/null @@ -1,45 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -include $(top_srcdir)/Makefile.common - -AM_CFLAGS = \ - $(COMMON_CFLAGS) - -AM_LDFLAGS = \ - $(COMMON_LFLAGS) \ - -Wl,-defsym -Wl,_TEXT_START_ADDR=0x0050 \ - -Wl,-defsym -Wl,_STACK_SIZE=3072 - -LDADD = libusrp2.a - -######################################################################## -# USRP2 specific library and programs -######################################################################## -noinst_LIBRARIES = libusrp2.a - -libusrp2_a_SOURCES = \ - $(COMMON_SRCS) \ - sd.c \ - ethernet.c \ - udp_fw_update.c - -noinst_PROGRAMS = \ - usrp2_txrx_uhd.elf - -usrp2_txrx_uhd_elf_SOURCES = \ - $(top_srcdir)/apps/txrx_uhd.c diff --git a/firmware/microblaze/usrp2p/.gitignore b/firmware/microblaze/usrp2p/.gitignore deleted file mode 100644 index 18f715618..000000000 --- a/firmware/microblaze/usrp2p/.gitignore +++ /dev/null @@ -1,9 +0,0 @@ -/Makefile -/Makefile.in -/*.a -/*.bin -/*.dump -/*.ihx -/*.elf -/*.rom -/*.map diff --git a/firmware/microblaze/usrp2p/bootloader/.gitignore b/firmware/microblaze/usrp2p/bootloader/.gitignore deleted file mode 100644 index 17b0f82f3..000000000 --- a/firmware/microblaze/usrp2p/bootloader/.gitignore +++ /dev/null @@ -1,11 +0,0 @@ -/*.ihx -/*.rmi -/*_rom -/*.elf -/*.bin -/*.dump -/*.log -/*.rom -/*.map -/Makefile -/Makefile.in |