4 files changed, 50 insertions, 25 deletions
diff --git a/firmware/microblaze/lib/hal_io.c b/firmware/microblaze/lib/hal_io.c
index 58b1e681e..b68067308 100644
--- a/firmware/microblaze/lib/hal_io.c
+++ b/firmware/microblaze/lib/hal_io.c
@@ -102,7 +102,7 @@ hal_finish(void)
 
 // %c
 inline int
-putchar(int ch)
+fputchar(int ch)
 {
   hal_gpio_set_rx((s << 8) | W, 0xff80);
   hal_gpio_set_rx(0, 0xff80);
@@ -124,14 +124,14 @@ hal_finish(void)
 
 // %c
 inline int
-putchar(int ch)
+fputchar(int ch)
 {
   hal_uart_putc(ch);
   return ch;
 }
 
 int
-getchar(void)
+fgetchar(void)
 {
   return hal_uart_getc();
 }
@@ -172,13 +172,13 @@ getchar(void)
 
 // \n
 inline void 
-newline(void)
+fnewline(void)
 {
   putchar('\n');
 }
 
 int
-putstr(const char *s)
+fputstr(const char *s)
 {
   while (*s)
     putchar(*s++);
@@ -187,7 +187,7 @@ putstr(const char *s)
 }
 
 int
-puts(const char *s)
+fputs(const char *s)
 {
   putstr(s);
   putchar('\n');
@@ -195,7 +195,7 @@ puts(const char *s)
 }
 
 char *
-gets(char * const s)
+fgets(char * const s)
 {
 	char *x = s;
 	while((*x=(char)hal_uart_getc()) != '\n') x++;
diff --git a/firmware/microblaze/lib/hal_uart.c b/firmware/microblaze/lib/hal_uart.c
index fe3b7515a..91d67b5e0 100644
--- a/firmware/microblaze/lib/hal_uart.c
+++ b/firmware/microblaze/lib/hal_uart.c
@@ -37,28 +37,30 @@ divisor_table[MAX_WB_DIV+1][NSPEEDS] = {
   { 163,  81,  41,  27, 14,  7 },  // 4:  25 MHz
 };
 
-#define u uart_regs
+//we wrap hal_uart_putc hal_uart_putc_nowait, and hal_uart_getc to accept a UART pointer given by hal_get_uart. we modify hal_io.c to use the new versions.
 
-static char uart_mode = UART_MODE_ONLCR;
+static char uart_mode[4] = {UART_MODE_ONLCR, UART_MODE_ONLCR, UART_MODE_ONLCR, UART_MODE_ONLCR};
 
 void
-hal_uart_set_mode(int mode)
+hal_uart_set_mode(int uart, int mode)
 {
-  uart_mode = mode;
+  uart_mode[uart] = mode;
 }
 
 void
 hal_uart_init(void)
 {
-	hal_uart_set_mode(UART_MODE_ONLCR);
-  u->clkdiv = 217;  // 230400 bps
+  for(int i = 0; i < 4; i++) {
+  	hal_uart_set_mode(i, UART_MODE_ONLCR);
+    u->clkdiv = 217;  // 230400 bps TODO: change to reflect new quad UART
+  }
 }
 
 void
-hal_uart_putc(int ch)
+hal_uart_putc(uart_regs_t *u, int ch)
 {
-  if (ch == '\n')// && (uart_mode == UART_MODE_ONLCR))		//map \n->\r\n if necessary
-    hal_uart_putc('\r');
+  if (ch == '\n')// && (uart_mode[uart] == UART_MODE_ONLCR))		//map \n->\r\n if necessary
+    hal_uart_putc(u, '\r');
 
   while (u->txlevel == 0)	 // wait for fifo to have space
     ;
@@ -67,20 +69,40 @@ hal_uart_putc(int ch)
 }
 
 void
-hal_uart_putc_nowait(int ch)
+hal_uart_putc_nowait(uart_regs_t *u, int ch)
 {
-  if (ch == '\n')// && (uart_mode == UART_MODE_ONLCR))		//map \n->\r\n if necessary
-    hal_uart_putc('\r');
+  if (ch == '\n')// && (uart_mode[uart] == UART_MODE_ONLCR))		//map \n->\r\n if necessary
+    hal_uart_putc(u, '\r');
 
   if(u->txlevel)   // If fifo has space
     u->txchar = ch;
 }
 
 int
-hal_uart_getc(void)
+hal_uart_getc(uart_regs_t *u)
 {
   while ((u->rxlevel) == 0)  // wait for data to be ready
     ;
 
   return u->rxchar;
 }
+
+uart_regs_t *
+hal_get_uart(int number)
+{
+  switch(number) {
+  case 0:
+    return uart_regs_0;
+    break;
+  case 1:
+    return uart_regs_1;
+    break;
+  case 2:
+    return uart_regs_2;
+    break;
+  case 3:
+    return uart_regs_3;
+    break;
+  default:
+    return uart_regs_0; //for safety
+}
diff --git a/firmware/microblaze/lib/hal_uart.h b/firmware/microblaze/lib/hal_uart.h
index dfd73c323..218bd7cb4 100644
--- a/firmware/microblaze/lib/hal_uart.h
+++ b/firmware/microblaze/lib/hal_uart.h
@@ -28,7 +28,7 @@
 /*
  * \brief Set uart mode
  */
-void hal_uart_set_mode(int flags);
+void hal_uart_set_mode(int uart, int flags);
 
 /*!
  * \brief one-time call to init
@@ -62,17 +62,17 @@ void hal_uart_get_config(hal_uart_config_t *c);
 /*!
  * \brief Enqueue \p ch for output over serial port
  */
-void hal_uart_putc(int ch);
+void hal_uart_putc(uart_regs_t *u, int ch);
 
 /*!
  * \brief Enqueue \p ch for output over serial port, silent fail if queue is full
  */
-void hal_uart_putc_nowait(int ch);
+void hal_uart_putc_nowait(uart_regs_t *u, int ch);
 
 /*
  * \brief Blocking read of next char from serial port
  */
-int hal_uart_getc(void);
+int hal_uart_getc(uart_regs_t *u);
 
 
 #endif /* INCLUDED_HAL_UART_H */
diff --git a/firmware/microblaze/usrp2p/memory_map.h b/firmware/microblaze/usrp2p/memory_map.h
index 9c5b576d7..b69cc59bd 100644
--- a/firmware/microblaze/usrp2p/memory_map.h
+++ b/firmware/microblaze/usrp2p/memory_map.h
@@ -781,7 +781,10 @@ typedef struct {
   volatile uint32_t rxchar;  // Read received characters here
 } uart_regs_t;
 
-#define uart_regs ((uart_regs_t *) UART_BASE)
+#define uart_regs_0 ((uart_regs_t *) UART_BASE)
+#define uart_regs_1 ((uart_regs_t *) UART_BASE + 0x0020)
+#define uart_regs_2 ((uart_regs_t *) UART_BASE + 0x0040)
+#define uart_regs_3 ((uart_regs_t *) UART_BASE + 0x0060)
 
 ///////////////////////////////////////////////////
 // ATR Controller, Slave 11