1 files changed, 99 insertions, 0 deletions
diff --git a/firmware/microblaze/usrp2p/xilinx_s3_icap.c b/firmware/microblaze/usrp2p/xilinx_s3_icap.c
new file mode 100644
index 000000000..50c85231c
--- /dev/null
+++ b/firmware/microblaze/usrp2p/xilinx_s3_icap.c
@@ -0,0 +1,99 @@
+/* -*- c -*- */
+/*
+ * Copyright 2009 Ettus Research LLC
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+/* Changes required to work for the Spartan-3A series:
+ * The ICAP interface on the 3A is 8 bits wide, instead of 32.
+ * Everything is Xilinx standard LSBit-first.
+ * The operations are all different.
+ * Commands are 16 bits long, presented to the ICAP interface 8 bits at a time.
+*/
+
+#include <xilinx_s3_icap.h>
+#include <memory_map.h>
+#include <spi_flash_private.h> //for READ_CMD
+
+
+/* bit swap end-for-end */
+static inline unsigned char
+swap8(unsigned char x)
+{
+  unsigned char r = 0;
+  r |= (x >> 7) & 0x01;
+  r |= (x >> 5) & 0x02;
+  r |= (x >> 3) & 0x04;
+  r |= (x >> 1) & 0x08;
+
+  r |= (x << 1) & 0x10;
+  r |= (x << 3) & 0x20;
+  r |= (x << 5) & 0x40;
+  r |= (x << 7) & 0x80;
+
+  return r;
+}
+
+void
+wr_icap(uint8_t x)
+{
+    icap_regs->icap = swap8(x);
+}
+
+uint8_t
+rd_icap(void)
+{
+    return swap8(icap_regs->icap);
+}
+
+
+void
+icap_reload_fpga(uint32_t flash_address)
+{
+    union {
+        uint32_t i;
+        uint8_t c[4];
+    } t;
+    t.i = flash_address;
+
+    //note! t.c[0] MUST contain the byte-wide read command for the flash device used.
+    //for the 25P64, and most other flash devices, this is 0x03.
+    t.c[0] = FAST_READ_CMD;
+
+    //TODO: look up the watchdog timer, ensure it won't fire too soon
+
+    //UG332 p279
+    wr_icap(0xff);
+    wr_icap(0xff); //dummy word, probably unnecessary
+    wr_icap(0xAA);
+    wr_icap(0x99); //sync word
+    wr_icap(0x32);
+    wr_icap(0x61); //Type 1 write General 1 (1 word)
+    wr_icap(t.c[2]); //bits 15-8
+    wr_icap(t.c[3]); //bits 7-0
+    wr_icap(0x32);
+    wr_icap(0x81); //Type 1 write General 2 (1 word)
+    wr_icap(t.c[0]); //C0-C8, the byte-wide read command
+    wr_icap(t.c[1]); //Upper 8 bits of 24-bit address
+    wr_icap(0x30);
+    wr_icap(0xA1); //Type 1 write CMD (1 word)
+    wr_icap(0x00);
+    wr_icap(0x0E); //REBOOT command
+    wr_icap(0x20);
+    wr_icap(0x00); //Type 1 NOP
+    wr_icap(0x20);
+    wr_icap(0x00);
+}