diff options
Diffstat (limited to 'firmware/microblaze/usrp2p/memory_map.h')
| -rw-r--r-- | firmware/microblaze/usrp2p/memory_map.h | 838 |
1 files changed, 838 insertions, 0 deletions
diff --git a/firmware/microblaze/usrp2p/memory_map.h b/firmware/microblaze/usrp2p/memory_map.h new file mode 100644 index 000000000..fc0094e67 --- /dev/null +++ b/firmware/microblaze/usrp2p/memory_map.h @@ -0,0 +1,838 @@ +/* -*- c -*- */ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* Overall Memory Map + * 0000-FFFF 64K RAM space + * + * 0000-1FFF 8K Boot RAM + * 2000-5FFF 16K Buffer pool + * 6000-7FFF 8K Peripherals + * 8000-FFFF 32K Main System RAM + + +From u2plus_core.v: +wb_1master #(.decode_w(8), +.s0_addr(8'b0000_0000),.s0_mask(8'b1110_0000), // 0-8K, Boot RAM +.s1_addr(8'b0100_0000),.s1_mask(8'b1100_0000), // 16K-32K, Buffer Pool +.s2_addr(8'b0011_0000),.s2_mask(8'b1111_1111), // SPI 0x3000 +.s3_addr(8'b0011_0001),.s3_mask(8'b1111_1111), // I2C 0x3100 +.s4_addr(8'b0011_0010),.s4_mask(8'b1111_1111), // GPIO 0x3200 +.s5_addr(8'b0011_0011),.s5_mask(8'b1111_1111), // Readback 0x3300 +.s6_addr(8'b0011_0100),.s6_mask(8'b1111_1111), // Ethernet MAC 0x3400 +.s7_addr(8'b0010_0000),.s7_mask(8'b1111_0000), // 8-12K, Settings Bus (only uses 1K) 0x2000-0x2FFF +.s8_addr(8'b0011_0101),.s8_mask(8'b1111_1111), // PIC 0x3500 +.s9_addr(8'b0011_0110),.s9_mask(8'b1111_1111), // Unused 0x3600 +.sa_addr(8'b0011_0111),.sa_mask(8'b1111_1111), // UART 0x3700 +.sb_addr(8'b0011_1000),.sb_mask(8'b1111_1111), // ATR 0x3800 +.sc_addr(8'b0011_1001),.sc_mask(8'b1111_1111), // Unused 0x3900 +.sd_addr(8'b0011_1010),.sd_mask(8'b1111_1111), // ICAP 0x3A00 +.se_addr(8'b0011_1011),.se_mask(8'b1111_1111), // SPI Flash 0x3B00 +.sf_addr(8'b1000_0000),.sf_mask(8'b1000_0000), // 32-64K, Main RAM 0x8000-0xFFFF + .dw(dw),.aw(aw),.sw(sw)) wb_1master + + */ + + +#ifndef INCLUDED_MEMORY_MAP_H +#define INCLUDED_MEMORY_MAP_H + +#include <stdint.h> + + +#define MASTER_CLK_RATE 100000000 // 100 MHz + + +//////////////////////////////////////////////////////////////// +// +// Memory map for embedded wishbone bus +// +//////////////////////////////////////////////////////////////// + +//////////////////////////////////////////////////////////////// +// Boot RAM, Slave 0 + +#define BOOTRAM_BASE 0x0000 + + +//////////////////////////////////////////////////////////////// +// Buffer Pool RAM, Slave 1 +// +// The buffers themselves are located in Slave 1, Buffer Pool RAM. +// The status registers are in Slave 5, Buffer Pool Status. +// The control register is in Slave 7, Settings Bus. + +#define BUFFER_POOL_RAM_BASE 0x4000 + +#define NBUFFERS 8 +#define BP_NLINES 0x0200 // number of 32-bit lines in a buffer +#define BP_LAST_LINE (BP_NLINES - 1) // last line in a buffer + +#define buffer_pool_ram \ + ((uint32_t *) BUFFER_POOL_RAM_BASE) + +#define buffer_ram(n) (&buffer_pool_ram[(n) * BP_NLINES]) + + +///////////////////////////////////////////////////// +// SPI Core, Slave 2. See core docs for more info +#define SPI_BASE 0x3000 // Base address (16-bit) is base peripheral addr + +typedef struct { + volatile uint32_t txrx0; + volatile uint32_t txrx1; + volatile uint32_t txrx2; + volatile uint32_t txrx3; + volatile uint32_t ctrl; + volatile uint32_t div; + volatile uint32_t ss; +} spi_regs_t; + +#define spi_regs ((spi_regs_t *) SPI_BASE) + + +// Masks for controlling different peripherals +#define SPI_SS_AD9510 1 +#define SPI_SS_AD9777 2 +#define SPI_SS_RX_DAC 4 +#define SPI_SS_RX_ADC 8 +#define SPI_SS_RX_DB 16 +#define SPI_SS_TX_DAC 32 +#define SPI_SS_TX_ADC 64 +#define SPI_SS_TX_DB 128 +#define SPI_SS_ADS62P44 256 + +// Masks for different parts of CTRL reg +#define SPI_CTRL_ASS (1<<13) +#define SPI_CTRL_IE (1<<12) +#define SPI_CTRL_LSB (1<<11) +#define SPI_CTRL_TXNEG (1<<10) +#define SPI_CTRL_RXNEG (1<< 9) +#define SPI_CTRL_GO_BSY (1<< 8) +#define SPI_CTRL_CHAR_LEN_MASK 0x7F + +//////////////////////////////////////////////// +// I2C, Slave 3 +// See Wishbone I2C-Master Core Specification. + +#define I2C_BASE 0x3100 + +typedef struct { + volatile uint32_t prescaler_lo; // r/w + volatile uint32_t prescaler_hi; // r/w + volatile uint32_t ctrl; // r/w + volatile uint32_t data; // wr = transmit reg; rd = receive reg + volatile uint32_t cmd_status; // wr = command reg; rd = status reg +} i2c_regs_t; + +#define i2c_regs ((i2c_regs_t *) I2C_BASE) + +#define I2C_CTRL_EN (1 << 7) // core enable +#define I2C_CTRL_IE (1 << 6) // interrupt enable + +// +// STA, STO, RD, WR, and IACK bits are cleared automatically +// +#define I2C_CMD_START (1 << 7) // generate (repeated) start condition +#define I2C_CMD_STOP (1 << 6) // generate stop condition +#define I2C_CMD_RD (1 << 5) // read from slave +#define I2C_CMD_WR (1 << 4) // write to slave +#define I2C_CMD_NACK (1 << 3) // when a rcvr, send ACK (ACK=0) or NACK (ACK=1) +#define I2C_CMD_RSVD_2 (1 << 2) // reserved +#define I2C_CMD_RSVD_1 (1 << 1) // reserved +#define I2C_CMD_IACK (1 << 0) // set to clear pending interrupt + +#define I2C_ST_RXACK (1 << 7) // Received acknowledgement from slave (1 = NAK, 0 = ACK) +#define I2C_ST_BUSY (1 << 6) // 1 after START signal detected; 0 after STOP signal detected +#define I2C_ST_AL (1 << 5) // Arbitration lost. 1 when core lost arbitration +#define I2C_ST_RSVD_4 (1 << 4) // reserved +#define I2C_ST_RSVD_3 (1 << 3) // reserved +#define I2C_ST_RSVD_2 (1 << 2) // reserved +#define I2C_ST_TIP (1 << 1) // Transfer-in-progress +#define I2C_ST_IP (1 << 0) // Interrupt pending + + +//////////////////////////////////////////////// +// GPIO, Slave 4 +// +// These go to the daughterboard i/o pins + +#define GPIO_BASE 0x3200 + +typedef struct { + volatile uint32_t io; // tx data in high 16, rx in low 16 + volatile uint32_t ddr; // 32 bits, 1 means output. tx in high 16, rx in low 16 + volatile uint32_t tx_sel; // 16 2-bit fields select which source goes to TX DB + volatile uint32_t rx_sel; // 16 2-bit fields select which source goes to RX DB +} gpio_regs_t; + +// each 2-bit sel field is layed out this way +#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg +#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic +#define GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric +#define GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric + +#define gpio_base ((gpio_regs_t *) GPIO_BASE) + +/////////////////////////////////////////////////// +// Buffer Pool Status, Slave 5 +// +// The buffers themselves are located in Slave 1, Buffer Pool RAM. +// The status registers are in Slave 5, Buffer Pool Status. +// The control register is in Slave 7, Settings Bus. + +#define BUFFER_POOL_STATUS_BASE 0x3300 + +typedef struct { + volatile uint32_t last_line[NBUFFERS]; // last line xfer'd in buffer + volatile uint32_t status; // error and done flags + volatile uint32_t hw_config; // see below + volatile uint32_t dummy[3]; + volatile uint32_t irqs; + volatile uint32_t pri_enc_bp_status; + volatile uint32_t cycle_count; +} buffer_pool_status_t; + +#define buffer_pool_status ((buffer_pool_status_t *) BUFFER_POOL_STATUS_BASE) + +#define BUTTON_PUSHED ((buffer_pool_status->irqs & PIC_BUTTON) ? 0 : 1) + +/* + * Buffer n's xfer is done. + * Clear this bit by issuing bp_clear_buf(n) + */ +#define BPS_DONE(n) (0x00000001 << (n)) +#define BPS_DONE_0 BPS_DONE(0) +#define BPS_DONE_1 BPS_DONE(1) +#define BPS_DONE_2 BPS_DONE(2) +#define BPS_DONE_3 BPS_DONE(3) +#define BPS_DONE_4 BPS_DONE(4) +#define BPS_DONE_5 BPS_DONE(5) +#define BPS_DONE_6 BPS_DONE(6) +#define BPS_DONE_7 BPS_DONE(7) + +/* + * Buffer n's xfer had an error. + * Clear this bit by issuing bp_clear_buf(n) + */ +#define BPS_ERROR(n) (0x00000100 << (n)) +#define BPS_ERROR_0 BPS_ERROR(0) +#define BPS_ERROR_1 BPS_ERROR(1) +#define BPS_ERROR_2 BPS_ERROR(2) +#define BPS_ERROR_3 BPS_ERROR(3) +#define BPS_ERROR_4 BPS_ERROR(4) +#define BPS_ERROR_5 BPS_ERROR(5) +#define BPS_ERROR_6 BPS_ERROR(6) +#define BPS_ERROR_7 BPS_ERROR(7) + +/* + * Buffer n is idle. A buffer is idle if it's not + * DONE, ERROR, or processing a transaction. If it's + * IDLE, it's safe to start a new transaction. + * + * Clear this bit by starting a xfer with + * bp_send_from_buf or bp_receive_to_buf. + */ +#define BPS_IDLE(n) (0x00010000 << (n)) +#define BPS_IDLE_0 BPS_IDLE(0) +#define BPS_IDLE_1 BPS_IDLE(1) +#define BPS_IDLE_2 BPS_IDLE(2) +#define BPS_IDLE_3 BPS_IDLE(3) +#define BPS_IDLE_4 BPS_IDLE(4) +#define BPS_IDLE_5 BPS_IDLE(5) +#define BPS_IDLE_6 BPS_IDLE(6) +#define BPS_IDLE_7 BPS_IDLE(7) + +/* + * Buffer n has a "slow path" packet in it. + * This bit is orthogonal to the bits above and indicates that + * the FPGA ethernet rx protocol engine has identified this packet + * as one requiring firmware intervention. + */ +#define BPS_SLOWPATH(n) (0x01000000 << (n)) +#define BPS_SLOWPATH_0 BPS_SLOWPATH(0) +#define BPS_SLOWPATH_1 BPS_SLOWPATH(1) +#define BPS_SLOWPATH_2 BPS_SLOWPATH(2) +#define BPS_SLOWPATH_3 BPS_SLOWPATH(3) +#define BPS_SLOWPATH_4 BPS_SLOWPATH(4) +#define BPS_SLOWPATH_5 BPS_SLOWPATH(5) +#define BPS_SLOWPATH_6 BPS_SLOWPATH(6) +#define BPS_SLOWPATH_7 BPS_SLOWPATH(7) + + +#define BPS_DONE_ALL 0x000000ff // mask of all dones +#define BPS_ERROR_ALL 0x0000ff00 // mask of all errors +#define BPS_IDLE_ALL 0x00ff0000 // mask of all idles +#define BPS_SLOWPATH_ALL 0xff000000 // mask of all slowpaths + +// The hw_config register + +#define HWC_SIMULATION 0x80000000 +#define HWC_WB_CLK_DIV_MASK 0x0000000f + +/*! + * \brief return non-zero if we're running under the simulator + */ +inline static int +hwconfig_simulation_p(void) +{ + return buffer_pool_status->hw_config & HWC_SIMULATION; +} + +/*! + * \brief Return Wishbone Clock divisor. + * The processor runs at the Wishbone Clock rate which is MASTER_CLK_RATE / divisor. + */ +inline static int +hwconfig_wishbone_divisor(void) +{ + return buffer_pool_status->hw_config & HWC_WB_CLK_DIV_MASK; +} + +/////////////////////////////////////////////////// +// Ethernet Core, Slave 6 + +#define ETH_BASE 0x3400 + +#include "eth_mac_regs.h" + +#define eth_mac ((eth_mac_regs_t *) ETH_BASE) + +//////////////////////////////////////////////////// +// Settings Bus, Slave #7, Not Byte Addressable! +// +// Output-only from processor point-of-view. +// 1KB of address space (== 256 32-bit write-only regs) + + +#define MISC_OUTPUT_BASE 0x2000 +#define TX_PROTOCOL_ENGINE_BASE 0x2080 +#define RX_PROTOCOL_ENGINE_BASE 0x20C0 +#define BUFFER_POOL_CTRL_BASE 0x2100 +#define LAST_SETTING_REG 0x23FC // last valid setting register + +#define SR_MISC 0 +#define SR_TX_PROT_ENG 32 +#define SR_RX_PROT_ENG 48 +#define SR_BUFFER_POOL_CTRL 64 +#define SR_UDP_SM 96 +#define SR_TX_DSP 208 +#define SR_TX_CTRL 224 +#define SR_RX_DSP 160 +#define SR_RX_CTRL 176 +#define SR_TIME64 192 +#define SR_SIMTIMER 198 +#define SR_LAST 255 + +#define _SR_ADDR(sr) (MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t)) + +// --- buffer pool control regs --- + +typedef struct { + volatile uint32_t ctrl; +} buffer_pool_ctrl_t; + +// buffer pool ports + +#define PORT_SERDES 0 // serial/deserializer +#define PORT_DSP 1 // DSP tx or rx pipeline +#define PORT_ETH 2 // ethernet tx or rx +#define PORT_RAM 3 // RAM tx or rx + +// the buffer pool ctrl register fields + +#define BPC_BUFFER(n) (((n) & 0xf) << 28) +#define BPC_BUFFER_MASK BPC_BUFFER(~0) +#define BPC_BUFFER_0 BPC_BUFFER(0) +#define BPC_BUFFER_1 BPC_BUFFER(1) +#define BPC_BUFFER_2 BPC_BUFFER(2) +#define BPC_BUFFER_3 BPC_BUFFER(3) +#define BPC_BUFFER_4 BPC_BUFFER(4) +#define BPC_BUFFER_5 BPC_BUFFER(5) +#define BPC_BUFFER_6 BPC_BUFFER(6) +#define BPC_BUFFER_7 BPC_BUFFER(7) +#define BPC_BUFFER_NIL BPC_BUFFER(0x8) // disable + +#define BPC_PORT(n) (((n) & 0x7) << 25) +#define BPC_PORT_MASK BPC_PORT(~0) +#define BPC_PORT_SERDES BPC_PORT(PORT_SERDES) +#define BPC_PORT_DSP BPC_PORT(PORT_DSP) +#define BPC_PORT_ETH BPC_PORT(PORT_ETH) +#define BPC_PORT_RAM BPC_PORT(PORT_RAM) +#define BPC_PORT_NIL BPC_PORT(0x4) // disable + +#define BPC_CLR (1 << 24) // mutually excl commands +#define BPC_READ (1 << 23) +#define BPC_WRITE (1 << 22) + +#define BPC_STEP(step) (((step) & 0xf) << 18) +#define BPC_STEP_MASK BPC_STEP(~0) +#define BPC_LAST_LINE(line) (((line) & 0x1ff) << 9) +#define BPC_LAST_LINE_MASK BPC_LAST_LINE(~0) +#define BPC_FIRST_LINE(line) (((line) & 0x1ff) << 0) +#define BPC_FIRST_LINE_MASK BPC_FIRST_LINE(~0) + +#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) BUFFER_POOL_CTRL_BASE) + +// --- misc outputs --- + +typedef struct { + volatile uint32_t clk_ctrl; + volatile uint32_t serdes_ctrl; + volatile uint32_t adc_ctrl; + volatile uint32_t leds; + volatile uint32_t phy_ctrl; // LSB is reset line to eth phy + volatile uint32_t debug_mux_ctrl; + volatile uint32_t ram_page; // FIXME should go somewhere else... + volatile uint32_t flush_icache; // Flush the icache + volatile uint32_t led_src; // HW or SW control for LEDs +} output_regs_t; + +#define SERDES_ENABLE 8 +#define SERDES_PRBSEN 4 +#define SERDES_LOOPEN 2 +#define SERDES_RXEN 1 + +#define ADC_CTRL_ON 0x0F +#define ADC_CTRL_OFF 0x00 + +// crazy order that matches the labels on the case + +#define LED_A (1 << 4) +#define LED_B (1 << 1) +#define LED_C (1 << 3) +#define LED_D (1 << 0) +#define LED_E (1 << 2) +// LED_F // controlled by CPLD +#define LED_RJ45 (1 << 5) + +#define output_regs ((output_regs_t *) MISC_OUTPUT_BASE) + +// --- udp tx regs --- + +typedef struct { + // Bits 19:16 are control info; bits 15:0 are data (see below) + // First two words are unused. + volatile uint32_t _nope[2]; + //--- ethernet header - 14 bytes--- + volatile struct{ + uint32_t mac_dst_0_1; //word 2 + uint32_t mac_dst_2_3; + uint32_t mac_dst_4_5; + uint32_t mac_src_0_1; + uint32_t mac_src_2_3; + uint32_t mac_src_4_5; + uint32_t ether_type; //word 8 + } eth_hdr; + //--- ip header - 20 bytes --- + volatile struct{ + uint32_t ver_ihl_tos; //word 9 + uint32_t total_length; + uint32_t identification; + uint32_t flags_frag_off; + uint32_t ttl_proto; + uint32_t checksum; + uint32_t src_addr_high; + uint32_t src_addr_low; + uint32_t dst_addr_high; + uint32_t dst_addr_low; //word 18 + } ip_hdr; + //--- udp header - 8 bytes --- + volatile struct{ + uint32_t src_port; //word 19 + uint32_t dst_port; + uint32_t length; + uint32_t checksum; //word 22 + } udp_hdr; + volatile uint32_t _pad[32-23]; +} sr_udp_sm_t; + +// control bits (all expect UDP_SM_LAST_WORD are mutually exclusive) + +// This is the last word of the header +#define UDP_SM_LAST_WORD (1 << 19) + +// Insert IP header checksum here. Data is the xor of 16'hFFFF and +// the values written into regs 9-13 and 15-18. +#define UDP_SM_INS_IP_HDR_CHKSUM (1 << 18) + +// Insert IP Length here (data ignored) +#define UDP_SM_INS_IP_LEN (1 << 17) + +// Insert UDP Length here (data ignore) +#define UDP_SM_INS_UDP_LEN (1 << 16) + +#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM)) + +// --- dsp tx regs --- + +#define MIN_CIC_INTERP 1 +#define MAX_CIC_INTERP 128 + +typedef struct { + volatile uint32_t num_chan; + volatile uint32_t clear_state; // clears out state machine, fifos, +} sr_tx_ctrl_t; + +#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL)) + +typedef struct { + volatile int32_t freq; + volatile uint32_t scale_iq; // {scale_i,scale_q} + volatile uint32_t interp_rate; + volatile uint32_t _padding0; // padding for the tx_mux + // NOT freq, scale, interp + /*! + * \brief output mux configuration. + * + * <pre> + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------------------------------+-------+-------+-------+-------+ + * | | DAC1 | DAC0 | + * +-------------------------------+-------+-------+-------+-------+ + * + * There are N DUCs (1 now) with complex inputs and outputs. + * There are two DACs. + * + * Each 4-bit DACx field specifies the source for the DAC + * Each subfield is coded like this: + * + * 3 2 1 0 + * +-------+ + * | N | + * +-------+ + * + * N specifies which DUC output is connected to this DAC. + * + * N which interp output + * --- ------------------- + * 0 DUC 0 I + * 1 DUC 0 Q + * 2 DUC 1 I + * 3 DUC 1 Q + * F All Zeros + * + * The default value is 0x10 + * </pre> + */ + volatile uint32_t tx_mux; + +} dsp_tx_regs_t; + +#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP)) + +// --- VITA RX CTRL regs --- +typedef struct { + // The following 3 are logically a single command register. + // They are clocked into the underlying fifo when time_ticks is written. + volatile uint32_t cmd; // {now, chain, num_samples(30) + volatile uint32_t time_secs; + volatile uint32_t time_ticks; + + volatile uint32_t clear_overrun; // write anything to clear overrun + volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter + volatile uint32_t vrt_stream_id; // word 1 of packet. + volatile uint32_t vrt_trailer; + volatile uint32_t nsamples_per_pkt; + volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources + volatile uint32_t pad[7]; // Make each structure 16 elements long +} sr_rx_ctrl_t; + +#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL)) + +// --- dsp rx regs --- +#define MIN_CIC_DECIM 1 +#define MAX_CIC_DECIM 128 + +typedef struct { + volatile int32_t freq; + volatile uint32_t scale_iq; // {scale_i,scale_q} + volatile uint32_t decim_rate; + volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits, + // otherwise it is automatic + volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits + + /*! + * \brief input mux configuration. + * + * This determines which ADC (or constant zero) is connected to + * each DDC input. There are N DDCs (1 now). Each has two inputs. + * + * <pre> + * Mux value: + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | |Q0 |I0 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) + * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) + * + * The default value is 0x4 + * </pre> + */ + volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v + + /*! + * \brief Streaming GPIO configuration + * + * This determines whether the LSBs of I and Q samples come from the DSP + * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first + * set the GPIO data direction register to have io_rx[15] and/or io_rx[14] + * configured as inputs. The GPIO pins will be sampled at the time the + * remainder of the DSP sample is strobed into the RX sample FIFO. There + * will be a decimation-dependent fixed time offset between the GPIO + * sample stream and the associated RF samples. + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | MBZ |Q|I| + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * I 0=LSB comes from DSP pipeline (default) + * 1=LSB comes from io_rx[15] + * + * Q 0=LSB comes from DSP pipeline (default) + * 1=LSB comes from io_rx[14] + */ + volatile uint32_t gpio_stream_enable; + +} dsp_rx_regs_t; + +#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP)) + +// ---------------------------------------------------------------- +// VITA49 64 bit time (write only) + /*! + * \brief Time 64 flags + * + * <pre> + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------------------------------------------+-+-+ + * | |S|P| + * +-----------------------------------------------------------+-+-+ + * + * P - PPS edge selection (0=negedge, 1=posedge, default=0) + * S - Source (0=sma, 1=mimo, 0=default) + * + * </pre> + */ +typedef struct { + volatile uint32_t secs; // value to set absolute secs to on next PPS + volatile uint32_t ticks; // value to set absolute ticks to on next PPS + volatile uint32_t flags; // flags - see chart above + volatile uint32_t imm; // set immediate (0=latch on next pps, 1=latch immediate, default=0) +} sr_time64_t; + +#define sr_time64 ((sr_time64_t *) _SR_ADDR(SR_TIME64)) + + +/* + * --- ethernet tx protocol engine regs (write only) --- + * + * These registers control the transmit portion of the ethernet + * protocol engine (out of USRP2). The protocol engine handles fifo + * status and sequence number insertion in outgoing packets, and + * automagically generates status packets when required to inform the + * host of changes in fifo availability. + * + * All outgoing packets have their fifo_status field set to the number + * of 32-bit lines of fifo available in the ethernet Rx fifo (see + * usrp2_eth_packet.h). Seqno's are set if FIXME, else 0. + * + * FIXME clean this up once we know how it's supposed to behave. + */ + +typedef struct { + volatile uint32_t flags; // not yet fully defined (channel?) + volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr + volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr + volatile uint32_t mac_src2345; // 4 bytes of destination mac addr + volatile uint32_t seqno; // Write to init seqno. It autoincs on match +} tx_proto_engine_regs_t; + +#define tx_proto_engine ((tx_proto_engine_regs_t *) TX_PROTOCOL_ENGINE_BASE) + +/* + * --- ethernet rx protocol engine regs (write only) --- + * + * These registers control the receive portion of the ethernet + * protocol engine (into USRP2). The protocol engine offloads common + * packet inspection operations so that firmware has less to do on + * "fast path" packets. + * + * The registers define conditions which must be matched for a packet + * to be considered a "fast path" packet. If a received packet + * matches the src and dst mac address, ethertype, flags field, and + * expected seqno number it is considered a "fast path" packet, and + * the expected seqno is updated. If the packet fails to satisfy any + * of the above conditions it's a "slow path" packet, and the + * corresponding SLOWPATH flag will be set buffer_status register. + */ + +typedef struct { + volatile uint32_t flags; // not yet fully defined (channel?) + volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr + volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr + volatile uint32_t mac_src2345; // 4 bytes of destination mac addr + volatile uint32_t ethertype_pad; // ethertype in high 16-bits +} rx_proto_engine_regs_t; + +#define rx_proto_engine ((rx_proto_engine_regs_t *) RX_PROTOCOL_ENGINE_BASE) + + + +/////////////////////////////////////////////////// +// Simple Programmable Interrupt Controller, Slave 8 + +#define PIC_BASE 0x3500 + +// Interrupt request lines +// Bit numbers (LSB == 0) that correpond to interrupts into PIC + +#define IRQ_BUFFER 0 // buffer manager +#define IRQ_ONETIME 1 +#define IRQ_SPI 2 +#define IRQ_I2C 3 +#define IRQ_PHY 4 // ethernet PHY +#define IRQ_UNDERRUN 5 +#define IRQ_OVERRUN 6 +#define IRQ_PPS 7 // pulse per second +#define IRQ_UART_RX 8 +#define IRQ_UART_TX 9 +#define IRQ_SERDES 10 +#define IRQ_CLKSTATUS 11 +#define IRQ_PERIODIC 12 +#define IRQ_BUTTON 13 + +#define IRQ_TO_MASK(x) (1 << (x)) + +#define PIC_BUFFER_INT IRQ_TO_MASK(IRQ_BUFFER) +#define PIC_ONETIME_INT IRQ_TO_MASK(IRQ_ONETIME) +#define PIC_SPI_INT IRQ_TO_MASK(IRQ_SPI) +#define PIC_I2C_INT IRQ_TO_MASK(IRQ_I2C) +#define PIC_PHY_INT IRQ_TO_MASK(IRQ_PHY) +#define PIC_UNDERRUN_INT IRQ_TO_MASK(IRQ_UNDERRUN) +#define PIC_OVERRUN_INT IRQ_TO_MASK(IRQ_OVERRUN) +#define PIC_PPS_INT IRQ_TO_MASK(IRQ_PPS) +#define PIC_UART_RX_INT IRQ_TO_MASK(IRQ_UART_RX) +#define PIC_UART_TX_INT IRQ_TO_MASK(IRQ_UART_TX) +#define PIC_SERDES IRQ_TO_MASK(IRQ_SERDES) +#define PIC_CLKSTATUS IRQ_TO_MASK(IRQ_CLKSTATUS) +#define PIC_BUTTON IRQ_TO_MASK(IRQ_BUTTON) + +typedef struct { + volatile uint32_t edge_enable; // mask: 1 -> edge triggered, 0 -> level + volatile uint32_t polarity; // mask: 1 -> rising edge + volatile uint32_t mask; // mask: 1 -> disabled + volatile uint32_t pending; // mask: 1 -> pending; write 1's to clear pending ints +} pic_regs_t; + +#define pic_regs ((pic_regs_t *) PIC_BASE) + +// ---------------------------------------------------------------- +// WB_CLK_RATE is the time base for this +typedef struct { + volatile uint32_t onetime; // Number of wb clk cycles till the onetime interrupt + volatile uint32_t periodic; // Repeat rate of periodic interrupt +} sr_simple_timer_t; + +#define sr_simple_timer ((sr_simple_timer_t *) _SR_ADDR(SR_SIMTIMER)) + +/////////////////////////////////////////////////// +// UNUSED, Slave 9 + +/////////////////////////////////////////////////// +// UART, Slave 10 + +#define UART_BASE 0x3700 + +typedef struct { + // All elements are 8 bits except for clkdiv (16), but we use uint32 to make + // the hardware for decoding easier + volatile uint32_t clkdiv; // Set to 50e6 divided by baud rate (no x16 factor) + volatile uint32_t txlevel; // Number of spaces in the FIFO for writes + volatile uint32_t rxlevel; // Number of available elements in the FIFO for reads + volatile uint32_t txchar; // Write characters to be sent here + volatile uint32_t rxchar; // Read received characters here +} uart_regs_t; + +#define uart_regs ((uart_regs_t *) UART_BASE) + +/////////////////////////////////////////////////// +// ATR Controller, Slave 11 + +#define ATR_BASE 0x3800 + +typedef struct { + volatile uint32_t v[16]; +} atr_regs_t; + +#define ATR_IDLE 0x0 // indicies into v +#define ATR_TX 0x1 +#define ATR_RX 0x2 +#define ATR_FULL 0x3 + +#define atr_regs ((atr_regs_t *) ATR_BASE) + +/////////////////////////////////////////////////// +// UNUSED, Slave 12 + +/////////////////////////////////////////////////// +// ICAP, Slave 13 + +#define ICAP_BASE 0x3A00 +typedef struct { + uint32_t icap; //only the lower 8 bits matter +} icap_regs_t; + +#define icap_regs ((icap_regs_t *) ICAP_BASE) + +/////////////////////////////////////////////////// +// SPI Flash interface, Slave 14 +// Control register definitions are the same as SPI, so use SPI_CTRL_ASS, etc. +// Peripheral mask not needed since bus is dedicated (CE held low) + +#define SPIF_BASE 0x3B00 +typedef struct { + volatile uint32_t txrx0; + volatile uint32_t txrx1; + volatile uint32_t txrx2; + volatile uint32_t txrx3; + volatile uint32_t ctrl; + volatile uint32_t div; + volatile uint32_t ss; +} spif_regs_t; + +#define spif_regs ((spif_regs_t *) SPIF_BASE) + +//////////////////////////////////////////////////////////////// +// Main RAM, Slave 15 + +#define RAM_BASE 0x8000 + + + +/////////////////////////////////////////////////// +#endif + |