diff options
Diffstat (limited to 'firmware/microblaze/lib')
| -rw-r--r-- | firmware/microblaze/lib/xilinx_s3_icap.c | 101 |
1 files changed, 0 insertions, 101 deletions
diff --git a/firmware/microblaze/lib/xilinx_s3_icap.c b/firmware/microblaze/lib/xilinx_s3_icap.c deleted file mode 100644 index 8aa7fd297..000000000 --- a/firmware/microblaze/lib/xilinx_s3_icap.c +++ /dev/null @@ -1,101 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2009 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - - -/* Changes required to work for the Spartan-3A series: - * The ICAP interface on the 3A is 8 bits wide, instead of 32. - * Everything is Xilinx standard LSB-first. - * The operations are all different. - * Commands are 16 bits long, presented to the ICAP interface 8 bits at a time. -*/ - -#include <xilinx_s3_icap.h> -#include <memory_map.h> -#include <spi_flash_private.h> //for READ_CMD - - -/* bit swap end-for-end */ -static unsigned char -swap8(unsigned char x) -{ - unsigned char r = 0; - r |= (x >> 7) & 0x01; - r |= (x >> 5) & 0x02; - r |= (x >> 3) & 0x04; - r |= (x >> 1) & 0x08; - - r |= (x << 1) & 0x10; - r |= (x << 3) & 0x20; - r |= (x << 5) & 0x40; - r |= (x << 7) & 0x80; - - return r; -} - -void -wr_icap(uint8_t x) -{ - uint8_t t = swap8(x); - - icap_regs->icap = t; //DEBUG: does not swap bits -} - -uint8_t -rd_icap(void) -{ - return swap8(icap_regs->icap); -} - - -void -icap_reload_fpga(uint32_t flash_address) -//this DOES NOT WORK right now. reboot is not getting executed correctly. -{ - union { - uint32_t i; - uint8_t c[4]; - } t; - t.i = flash_address; - - //note! t.c[0] MUST contain the byte-wide read command for the flash device used. - //for the 25P64, and most other flash devices, this is 0x03. - t.c[0] = READ_CMD; //legacy command, use FAST_READ_CMD 0x0B after testing - - //TODO: look up the watchdog timer, ensure it won't fire too soon - - //UG332 p279 -// wr_icap(0xff); -// wr_icap(0xff); //dummy word, probably unnecessary - wr_icap(0xAA); - wr_icap(0x99); //sync word - wr_icap(0x32); - wr_icap(0x61); //Type 1 write General 1 (1 word) - wr_icap(t.c[2]); //bits 15-8 - wr_icap(t.c[3]); //bits 7-0 - wr_icap(0x32); - wr_icap(0x81); //Type 1 write General 2 (1 word) - wr_icap(t.c[0]); //C0-C8, the byte-wide read command - wr_icap(t.c[1]); //Upper 8 bits of 24-bit address - wr_icap(0x30); - wr_icap(0xA1); //Type 1 write CMD (1 word) - wr_icap(0x00); - wr_icap(0x0E); //REBOOT command - wr_icap(0x20); - wr_icap(0x00); //Type 1 NOP - -} |