diff options
Diffstat (limited to 'firmware/microblaze/lib/wb16550.h')
| -rw-r--r-- | firmware/microblaze/lib/wb16550.h | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/firmware/microblaze/lib/wb16550.h b/firmware/microblaze/lib/wb16550.h deleted file mode 100644 index 7522f4438..000000000 --- a/firmware/microblaze/lib/wb16550.h +++ /dev/null @@ -1,98 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - - -// Wishbone National Semiconductor 16550A compatible UART - -#ifndef INCLUDED_WB16550_H -#define INCLUDED_WB16550_H - -#include <stdint.h> - -typedef struct { - volatile uint8_t data; // 0 r/w: r: rx fifo, w: tx fifo (if DLAB: LSB of divisor) - volatile uint8_t ier; // 1 r/w: Interrupt Enable Register (if DLAB: MSB of divisor) - volatile uint8_t iir_fcr; // 2 r/w: r: Interrupt ID Register, - // w: Fifo Control Register - volatile uint8_t lcr; // 3 r/w: Line Control Register - volatile uint8_t mcr; // 4 w: Modem Control Register - volatile uint8_t lsr; // 5 r: Line Status Register - volatile uint8_t msr; // 6 r: Modem Status Register - -} wb16550_reg_t; - -#define UART_IER_RDI 0x01 // Enable received data interrupt -#define UART_IER_THRI 0x02 // Enable transmitter holding reg empty int. -#define UART_IER_RLSI 0x04 // Enable receiver line status interrupt -#define UART_IER_MSI 0x08 // Enable modem status interrupt - -#define UART_IIR_NO_INT 0x01 // No interrupts pending -#define UART_IIR_ID_MASK 0x06 // Mask for interrupt ID -#define UART_IIR_MSI 0x00 // Modem status interrupt -#define UART_IIR_THRI 0x02 // Tx holding register empty int -#define UART_IIR_RDI 0x04 // Rx data available int -#define UART_IIR_RLSI 0x06 // Receiver line status int - -#define UART_FCR_ENABLE_FIFO 0x01 // ignore, always enabled -#define UART_FCR_CLEAR_RCVR 0x02 // Clear the RCVR FIFO -#define UART_FCR_CLEAR_XMIT 0x04 // Clear the XMIT FIFO -#define UART_FCR_TRIGGER_MASK 0xC0 // Mask for FIFO trigger range -#define UART_FCR_TRIGGER_1 0x00 // Rx fifo trigger level: 1 byte -#define UART_FCR_TRIGGER_4 0x40 // Rx fifo trigger level: 4 bytes -#define UART_FCR_TRIGGER_8 0x80 // Rx fifo trigger level: 8 bytes -#define UART_FCR_TRIGGER_14 0xC0 // Rx fifo trigger level: 14 bytes - -#define UART_LCR_DLAB 0x80 // Divisor latch access bit -#define UART_LCR_SBC 0x40 // Set break control -#define UART_LCR_SPAR 0x20 // Stick parity -#define UART_LCR_EPAR 0x10 // Even parity select -#define UART_LCR_PARITY 0x08 // Parity Enable -#define UART_LCR_STOP 0x04 // Stop bits: 0=1 bit, 1=2 bits -#define UART_LCR_WLEN5 0x00 // Wordlength: 5 bits -#define UART_LCR_WLEN6 0x01 // Wordlength: 6 bits -#define UART_LCR_WLEN7 0x02 // Wordlength: 7 bits -#define UART_LCR_WLEN8 0x03 // Wordlength: 8 bits - -#define UART_MCR_LOOP 0x10 // Enable loopback test mode -#define UART_MCR_OUT2n 0x08 // Out2 complement (loopback mode) -#define UART_MCR_OUT1n 0x04 // Out1 complement (loopback mode) -#define UART_MCR_RTSn 0x02 // RTS complement -#define UART_MCR_DTRn 0x01 // DTR complement - -#define UART_LSR_TEMT 0x40 // Transmitter empty -#define UART_LSR_THRE 0x20 // Transmit-hold-register empty -#define UART_LSR_BI 0x10 // Break interrupt indicator -#define UART_LSR_FE 0x08 // Frame error indicator -#define UART_LSR_PE 0x04 // Parity error indicator -#define UART_LSR_OE 0x02 // Overrun error indicator -#define UART_LSR_DR 0x01 // Receiver data ready -#define UART_LSR_BRK_ERROR_BITS 0x1E // BI, FE, PE, OE bits -#define UART_LSR_ERROR 0x80 // At least 1 PE, FE or BI are in the fifo - -#define UART_MSR_DCD 0x80 // Data Carrier Detect -#define UART_MSR_RI 0x40 // Ring Indicator -#define UART_MSR_DSR 0x20 // Data Set Ready -#define UART_MSR_CTS 0x10 // Clear to Send -#define UART_MSR_DDCD 0x08 // Delta DCD -#define UART_MSR_TERI 0x04 // Trailing edge ring indicator -#define UART_MSR_DDSR 0x02 // Delta DSR -#define UART_MSR_DCTS 0x01 // Delta CTS -#define UART_MSR_ANY_DELTA 0x0F // Any of the delta bits! - - -#endif // INCLUDED_WB16550_H |