1 files changed, 0 insertions, 94 deletions
diff --git a/firmware/microblaze/lib/hal_uart.h b/firmware/microblaze/lib/hal_uart.h
deleted file mode 100644
index 758c8cb5e..000000000
--- a/firmware/microblaze/lib/hal_uart.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* -*- c -*- */
-/*
- * Copyright 2007,2008 Free Software Foundation, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef INCLUDED_HAL_UART_H
-#define INCLUDED_HAL_UART_H
-
-/*!
- * \brief uart mode flags
- */
-#define	UART_MODE_RAW		0x0000	// no mapping on input or output
-#define	UART_MODE_ONLCR	0x0001	// map \n to \r\n on output (default)
-
-#define DEFAULT_UART UART_DEBUG //which UART printf, gets, etc. use
-
-#define HAL_UART_TIMEOUT_MS 300
-
-typedef enum {
-  US_9600   = 0,
-  US_19200  = 1,
-  US_38400  = 2,
-  US_57600  = 3,
-  US_115200 = 4,
-  US_230400 = 5
-} hal_uart_speed_t;
-
-typedef struct {
-  hal_uart_speed_t	speed;
-} hal_uart_config_t;
-
-typedef enum {
-  UART_DEBUG = 0,
-  UART_EXP   = 1,
-  UART_GPS   = 2
-} hal_uart_name_t;
-
-/*
- * \brief Set uart mode
- */
-void hal_uart_set_mode(hal_uart_name_t uart, int flags);
-
-/*!
- * \brief one-time call to init
- */
-void hal_uart_init(void);
-
-/*!
- * \brief Set uart parameters
- *  Default is 115,200 bps, 8N1.
- */
-void hal_uart_set_config(const hal_uart_config_t *c);
-
-/*!
- * \brief Get uart configuation.
- */
-void hal_uart_get_config(hal_uart_config_t *c);
-
-/*!
- * \brief Enqueue \p ch for output over serial port
- */
-void hal_uart_putc(hal_uart_name_t u, int ch);
-
-/*!
- * \brief Enqueue \p ch for output over serial port, silent fail if queue is full
- */
-void hal_uart_putc_nowait(hal_uart_name_t u, int ch);
-
-/*
- * \brief Blocking read of next char from serial port
- */
-int hal_uart_getc(hal_uart_name_t u);
-
-/*
- * \brief Blocking read of next char from serial port with timeout
- */
-int hal_uart_getc_timeout(hal_uart_name_t u);
-
-int hal_uart_rx_flush(hal_uart_name_t u);
-
-#endif /* INCLUDED_HAL_UART_H */