diff options
Diffstat (limited to 'firmware/microblaze/lib/clocks.c')
| -rw-r--r-- | firmware/microblaze/lib/clocks.c | 239 |
1 files changed, 239 insertions, 0 deletions
diff --git a/firmware/microblaze/lib/clocks.c b/firmware/microblaze/lib/clocks.c new file mode 100644 index 000000000..d9d4fcd3c --- /dev/null +++ b/firmware/microblaze/lib/clocks.c @@ -0,0 +1,239 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include <config.h> +#endif +#include <clocks.h> + +#include "memory_map.h" +#include "ad9510.h" +#include "spi.h" +#include "u2_init.h" +#include "nonstdio.h" + +void +clocks_init(void) +{ + // Set up basic clocking functions in AD9510 + ad9510_write_reg(0x45, 0x00); // CLK2 drives distribution + + clocks_enable_fpga_clk(true, 1); + + spi_wait(); + + // Set up PLL for 10 MHz reference + // Reg 4, A counter, Don't Care + ad9510_write_reg(0x05, 0x00); // Reg 5, B counter MSBs, 0 + ad9510_write_reg(0x06, 0x05); // Reg 6, B counter LSBs, 5 + // Reg 7, Loss of reference detect, doesn't work yet, 0 + ad9510_write_reg(0x5A, 0x01); // Update Regs + + // Primary clock configuration + clocks_mimo_config(MC_WE_DONT_LOCK); + + // Set up other clocks + clocks_enable_test_clk(false, 0); + clocks_enable_tx_dboard(false, 0); + clocks_enable_rx_dboard(false, 0); + clocks_enable_eth_phyclk(false, 0); + + // Enable clock to ADCs and DACs + clocks_enable_dac_clk(true, 1); + clocks_enable_adc_clk(true, 1); +} + + +void +clocks_mimo_config(int flags) +{ + if (flags & _MC_WE_LOCK){ + // Reg 8, Charge pump on, dig lock det, positive PFD, 47 + ad9510_write_reg(0x08, 0x47); + } + else { + // Reg 8, Charge pump off, dig lock det, positive PFD + ad9510_write_reg(0x08, 0x00); + } + + // Reg 9, Charge pump current, 0x40=3mA, 0x00=650uA + ad9510_write_reg(0x09, 0x00); + // Reg A, Prescaler of 2, everything normal 04 + ad9510_write_reg(0x0A, 0x04); + // Reg B, R Div MSBs, 0 + ad9510_write_reg(0x0B, 0x00); + // Reg C, R Div LSBs, 1 + ad9510_write_reg(0x0C, 0x01); + // Reg D, Antibacklash, Digital lock det, 0 + + ad9510_write_reg(0x5A, 0x01); // Update Regs + + spi_wait(); + + // Allow for clock switchover + + if (flags & _MC_WE_LOCK){ // WE LOCK + if (flags & _MC_MIMO_CLK_INPUT) { + // Turn on ref output and choose the MIMO connector + output_regs->clk_ctrl = 0x15; + } + else { + // turn on ref output and choose the SMA + output_regs->clk_ctrl = 0x1C; + } + } + else { // WE DONT LOCK + // Disable both ext clk inputs + output_regs->clk_ctrl = 0x10; + } + + // Do we drive a clock onto the MIMO connector? + if (flags & MC_PROVIDE_CLK_TO_MIMO) + clocks_enable_clkexp_out(true,10); + else + clocks_enable_clkexp_out(false,0); +} + +bool +clocks_lock_detect() +{ + if(pic_regs->pending & PIC_CLKSTATUS) + return true; + return false; +} + +int inline +clocks_gen_div(int divisor) +{ + int L,H; + L = (divisor>>1)-1; + H = divisor-L-2; + return (L<<4)|H; +} + +#define CLOCK_OUT_EN 0x08 +#define CLOCK_OUT_DIS_CMOS 0x01 +#define CLOCK_OUT_DIS_PECL 0x02 +#define CLOCK_DIV_DIS 0x80 +#define CLOCK_DIV_EN 0x00 + +#define CLOCK_MODE_PECL 1 +#define CLOCK_MODE_LVDS 2 +#define CLOCK_MODE_CMOS 3 + +void +clocks_enable_XXX_clk(bool enable, int divisor, int reg_en, int reg_div, int mode) +{ + int enable_word, div_word, div_en_word; + + switch(mode) { + case CLOCK_MODE_PECL : + enable_word = enable ? 0x08 : 0x0A; + break; + case CLOCK_MODE_LVDS : + enable_word = enable ? 0x02 : 0x03; + break; + case CLOCK_MODE_CMOS : + enable_word = enable ? 0x08 : 0x09; + break; + } + if(enable && (divisor>1)) { + div_word = clocks_gen_div(divisor); + div_en_word = CLOCK_DIV_EN; + } + else { + div_word = 0; + div_en_word = CLOCK_DIV_DIS; + } + + ad9510_write_reg(reg_en,enable_word); // Output en/dis + ad9510_write_reg(reg_div,div_word); // Set divisor + ad9510_write_reg(reg_div+1,div_en_word); // Enable or Bypass Divider + ad9510_write_reg(0x5A, 0x01); // Update Regs +} + +// Clock 0 +void +clocks_enable_test_clk(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x3C,0x48,CLOCK_MODE_PECL); +} + +// Clock 1 +void +clocks_enable_fpga_clk(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x3D,0x4A,CLOCK_MODE_PECL); +} + +// Clock 2 on Rev 3, Clock 5 on Rev 4 +void +clocks_enable_clkexp_out(bool enable, int divisor) +{ + if(u2_hw_rev_major == 3) + clocks_enable_XXX_clk(enable,divisor,0x3E,0x4C,CLOCK_MODE_PECL); + else if(u2_hw_rev_major == 4) { + ad9510_write_reg(0x34,0x00); // Turn on fine delay + ad9510_write_reg(0x35,0x00); // Set Full Scale to nearly 10ns + ad9510_write_reg(0x36,0x1c); // Set fine delay. 0x20 is midscale + clocks_enable_XXX_clk(enable,divisor,0x41,0x52,CLOCK_MODE_LVDS); + + } + else + putstr("ERR: Invalid Rev\n"); +} + +// Clock 5 on Rev 3, none (was 2) on Rev 4 +void +clocks_enable_eth_phyclk(bool enable, int divisor) +{ + if(u2_hw_rev_major == 3) + clocks_enable_XXX_clk(enable,divisor,0x41,0x52,CLOCK_MODE_LVDS); + else if(u2_hw_rev_major == 4) + clocks_enable_XXX_clk(enable,divisor,0x3E,0x4C,CLOCK_MODE_PECL); + else + putstr("ERR: Invalid Rev\n"); +} + +// Clock 3 +void +clocks_enable_dac_clk(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x3F,0x4E,CLOCK_MODE_PECL); +} + +// Clock 4 +void +clocks_enable_adc_clk(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x40,0x50,CLOCK_MODE_LVDS); +} + +// Clock 6 +void +clocks_enable_tx_dboard(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x42,0x54,CLOCK_MODE_CMOS); +} + +// Clock 7 +void +clocks_enable_rx_dboard(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x43,0x56,CLOCK_MODE_CMOS); +} |