diff options
Diffstat (limited to 'firmware/microblaze/apps')
| -rw-r--r-- | firmware/microblaze/apps/txrx_uhd.c | 76 |
1 files changed, 61 insertions, 15 deletions
diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c index 9cf4c163f..1c6e0624f 100644 --- a/firmware/microblaze/apps/txrx_uhd.c +++ b/firmware/microblaze/apps/txrx_uhd.c @@ -172,6 +172,33 @@ void handle_udp_data_packet( #define OTW_GPIO_BANK_TO_NUM(bank) \ (((bank) == USRP2_DIR_RX)? (GPIO_RX_BANK) : (GPIO_TX_BANK)) +//setup the output data +static usrp2_ctrl_data_t ctrl_data_out; +static struct socket_address i2c_src; +static struct socket_address spi_src; + +static volatile bool i2c_done = false; +void i2c_read_done_callback(void) { + //printf("I2C read done callback\n"); + i2c_async_data_ready(ctrl_data_out.data.i2c_args.data); + i2c_done = true; + i2c_register_callback(0); +} + +void i2c_write_done_callback(void) { + //printf("I2C write done callback\n"); + i2c_done = true; + i2c_register_callback(0); +} + +static volatile bool spi_done = false; +static volatile uint32_t spi_readback_data; +void get_spi_readback_data(void) { + ctrl_data_out.data.spi_args.data = spi_get_data(); + spi_done = true; + spi_register_callback(0); +} + void handle_udp_ctrl_packet( struct socket_address src, struct socket_address dst, unsigned char *payload, int payload_len @@ -197,11 +224,9 @@ void handle_udp_ctrl_packet( } //setup the output data - usrp2_ctrl_data_t ctrl_data_out = { - .proto_ver = USRP2_FW_COMPAT_NUM, - .id=USRP2_CTRL_ID_HUH_WHAT, - .seq=ctrl_data_in->seq - }; + ctrl_data_out.proto_ver = USRP2_FW_COMPAT_NUM; + ctrl_data_out.id=USRP2_CTRL_ID_HUH_WHAT; + ctrl_data_out.seq=ctrl_data_in->seq; //handle the data based on the id switch(ctrl_data_in_id){ @@ -212,6 +237,7 @@ void handle_udp_ctrl_packet( case USRP2_CTRL_ID_WAZZUP_BRO: ctrl_data_out.id = USRP2_CTRL_ID_WAZZUP_DUDE; memcpy(&ctrl_data_out.data.ip_addr, get_ip_addr(), sizeof(struct ip_addr)); + send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); break; /******************************************************************* @@ -219,19 +245,21 @@ void handle_udp_ctrl_packet( ******************************************************************/ case USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO:{ //transact - uint32_t result = spi_transact( - (ctrl_data_in->data.spi_args.readback == 0)? SPI_TXONLY : SPI_TXRX, + bool success = spi_async_transact( + //(ctrl_data_in->data.spi_args.readback == 0)? SPI_TXONLY : SPI_TXRX, ctrl_data_in->data.spi_args.dev, //which device ctrl_data_in->data.spi_args.data, //32 bit data ctrl_data_in->data.spi_args.num_bits, //length in bits - (ctrl_data_in->data.spi_args.mosi_edge == USRP2_CLK_EDGE_RISE)? SPIF_PUSH_FALL : SPIF_PUSH_RISE | - (ctrl_data_in->data.spi_args.miso_edge == USRP2_CLK_EDGE_RISE)? SPIF_LATCH_RISE : SPIF_LATCH_FALL + (ctrl_data_in->data.spi_args.mosi_edge == USRP2_CLK_EDGE_RISE)? SPIF_PUSH_FALL : SPIF_PUSH_RISE | //flags + (ctrl_data_in->data.spi_args.miso_edge == USRP2_CLK_EDGE_RISE)? SPIF_LATCH_RISE : SPIF_LATCH_FALL, + get_spi_readback_data //callback ); //load output - ctrl_data_out.data.spi_args.data = result; ctrl_data_out.id = USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE; + spi_src = src; } +// send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); break; /******************************************************************* @@ -239,11 +267,13 @@ void handle_udp_ctrl_packet( ******************************************************************/ case USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO:{ uint8_t num_bytes = ctrl_data_in->data.i2c_args.bytes; - i2c_read( + i2c_register_callback(i2c_read_done_callback); + i2c_async_read( ctrl_data_in->data.i2c_args.addr, - ctrl_data_out.data.i2c_args.data, num_bytes ); + i2c_src = src; +// i2c_dst = dst; ctrl_data_out.id = USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE; ctrl_data_out.data.i2c_args.bytes = num_bytes; } @@ -251,11 +281,14 @@ void handle_udp_ctrl_packet( case USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO:{ uint8_t num_bytes = ctrl_data_in->data.i2c_args.bytes; - i2c_write( + i2c_register_callback(i2c_read_done_callback); + i2c_async_write( ctrl_data_in->data.i2c_args.addr, ctrl_data_in->data.i2c_args.data, num_bytes ); + i2c_src = src; +// i2c_dst = dst; ctrl_data_out.id = USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE; ctrl_data_out.data.i2c_args.bytes = num_bytes; } @@ -287,6 +320,7 @@ void handle_udp_ctrl_packet( } ctrl_data_out.id = USRP2_CTRL_ID_OMG_POKED_REGISTER_SO_BAD_DUDE; + send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); break; case USRP2_CTRL_ID_PEEK_AT_THIS_REGISTER_FOR_ME_BRO: @@ -309,6 +343,7 @@ void handle_udp_ctrl_packet( } ctrl_data_out.id = USRP2_CTRL_ID_WOAH_I_DEFINITELY_PEEKED_IT_DUDE; + send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); break; case USRP2_CTRL_ID_SO_LIKE_CAN_YOU_READ_THIS_UART_BRO:{ @@ -335,9 +370,9 @@ void handle_udp_ctrl_packet( default: ctrl_data_out.id = USRP2_CTRL_ID_HUH_WHAT; - + send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); } - send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); + } /* @@ -503,6 +538,17 @@ main(void) buffer_irq_handler(0); + if(i2c_done) { + i2c_done = false; + send_udp_pkt(USRP2_UDP_CTRL_PORT, i2c_src, &ctrl_data_out, sizeof(ctrl_data_out)); + //printf("Sending UDP packet from main loop for I2C...\n"); + } + + if(spi_done) { + spi_done = false; + send_udp_pkt(USRP2_UDP_CTRL_PORT, spi_src, &ctrl_data_out, sizeof(ctrl_data_out)); + } + int pending = pic_regs->pending; // poll for under or overrun if (pending & PIC_UNDERRUN_INT){ |