diff options
Diffstat (limited to 'firmware/microblaze/apps/txrx_uhd.c')
| -rw-r--r-- | firmware/microblaze/apps/txrx_uhd.c | 145 |
1 files changed, 0 insertions, 145 deletions
diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c index 8ff3b8c58..db830fa51 100644 --- a/firmware/microblaze/apps/txrx_uhd.c +++ b/firmware/microblaze/apps/txrx_uhd.c @@ -22,8 +22,6 @@ #include "config.h" #endif -#define DEBUG_MODE 0 //0 for normal operation - #include <lwip/ip.h> #include <lwip/udp.h> #include "u2_init.h" @@ -49,8 +47,6 @@ #include <ethertype.h> #include <arp_cache.h> -#define LEDS_SW LED_A - /* * Full duplex Tx and Rx between ethernet and DSP pipelines * @@ -126,14 +122,7 @@ dbsm_t dsp_rx_sm; // the state machine // The mac address of the host we're sending to. eth_mac_addr_t host_mac_addr; -//controls continuous streaming... -static bool auto_reload_command = false; -static size_t streaming_items_per_frame = 0; -static int streaming_frame_count = 0; -#define FRAMES_PER_CMD 2 - static void setup_network(void); -static void setup_vrt(void); // ---------------------------------------------------------------- // the fast-path setup global variables @@ -154,9 +143,6 @@ void handle_udp_data_packet( struct socket_address src, struct socket_address dst, unsigned char *payload, int payload_len ){ - //store the 2nd word as the following: - streaming_items_per_frame = ((uint32_t *)payload)[1]; - //its a tiny payload, load the fast-path variables fp_mac_addr_src = *ethernet_mac_addr(); arp_cache_lookup_mac(&src.addr, &fp_mac_addr_dst); @@ -177,23 +163,12 @@ void handle_udp_data_packet( //setup network and vrt setup_network(); - setup_vrt(); // kick off the state machine dbsm_start(&dsp_rx_sm); } -static void inline issue_stream_command(size_t nsamps, bool now, bool chain, uint32_t secs, uint32_t ticks, bool start){ - //printf("Stream cmd: nsamps %d, now %d, chain %d, secs %u, ticks %u\n", (int)nsamps, now, chain, secs, ticks); - sr_rx_ctrl->cmd = MK_RX_CMD(nsamps, now, chain); - - if (start) dbsm_start(&dsp_rx_sm); - - sr_rx_ctrl->time_secs = secs; - sr_rx_ctrl->time_ticks = ticks; // enqueue command -} - #define OTW_GPIO_BANK_TO_NUM(bank) \ (((bank) == USRP2_DIR_RX)? (GPIO_RX_BANK) : (GPIO_TX_BANK)) @@ -304,72 +279,6 @@ void handle_udp_ctrl_packet( break; /******************************************************************* - * Streaming - ******************************************************************/ - case USRP2_CTRL_ID_SEND_STREAM_COMMAND_FOR_ME_BRO:{ - - //issue two commands and set the auto-reload flag - if (ctrl_data_in->data.stream_cmd.continuous){ - printf("Setting up continuous streaming...\n"); - printf("items per frame: %d\n", (int)streaming_items_per_frame); - hal_set_leds(LED_A, LEDS_SW); - auto_reload_command = true; - streaming_frame_count = FRAMES_PER_CMD; - - issue_stream_command( - streaming_items_per_frame * FRAMES_PER_CMD, - (ctrl_data_in->data.stream_cmd.now == 0)? false : true, //now - true, //chain - ctrl_data_in->data.stream_cmd.secs, - ctrl_data_in->data.stream_cmd.ticks, - true //start - ); - - issue_stream_command( - streaming_items_per_frame * FRAMES_PER_CMD, - true, //now - true, //chain - 0, 0, //time does not matter - false - ); - - } - - //issue regular stream commands (split commands if too large) - else{ - hal_set_leds(0, LEDS_SW); - auto_reload_command = false; - size_t num_samps = ctrl_data_in->data.stream_cmd.num_samps; - if (num_samps == 0) num_samps = 1; //FIXME hack, zero is used when stopping continuous streaming but it somehow makes it inifinite - - bool chain = num_samps > MAX_SAMPLES_PER_CMD; - issue_stream_command( - (chain)? streaming_items_per_frame : num_samps, //nsamps - (ctrl_data_in->data.stream_cmd.now == 0)? false : true, //now - (ctrl_data_in->data.stream_cmd.chain == 0)? chain : true, //chain - ctrl_data_in->data.stream_cmd.secs, - ctrl_data_in->data.stream_cmd.ticks, - false - ); - - //handle rest of the samples that did not fit into one cmd - while(chain){ - num_samps -= MAX_SAMPLES_PER_CMD; - chain = num_samps > MAX_SAMPLES_PER_CMD; - issue_stream_command( - (chain)? streaming_items_per_frame : num_samps, //nsamps - true, //now - (ctrl_data_in->data.stream_cmd.chain == 0)? chain : true, //chain - 0, 0, //time does not matter - false - ); - } - } - ctrl_data_out.id = USRP2_CTRL_ID_GOT_THAT_STREAM_COMMAND_DUDE; - break; - } - - /******************************************************************* * Peek and Poke Register ******************************************************************/ case USRP2_CTRL_ID_POKE_THIS_REGISTER_FOR_ME_BRO: @@ -463,25 +372,6 @@ eth_pkt_inspector(dbsm_t *sm, int bufno) //------------------------------------------------------------------ -static bool vrt_has_trailer(void){ - return USRP2_HOST_RX_VRT_TRAILER_WORDS32 > 0; -} - -static void setup_vrt(void){ - // setup RX DSP regs - sr_rx_ctrl->nsamples_per_pkt = streaming_items_per_frame; - sr_rx_ctrl->nchannels = 1; - sr_rx_ctrl->clear_overrun = 1; // reset - sr_rx_ctrl->vrt_header = (0 - | VRTH_PT_IF_DATA_WITH_SID - | (vrt_has_trailer()? VRTH_HAS_TRAILER : 0) - | VRTH_TSI_OTHER - | VRTH_TSF_SAMPLE_CNT - ); - sr_rx_ctrl->vrt_stream_id = 0; - sr_rx_ctrl->vrt_trailer = 0; -} - /* * 1's complement sum for IP and UDP headers * @@ -554,13 +444,6 @@ fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false buff->control_word = MK_RX_CTRL_WORD(vrt_len); buff->vrt_header[0] = (buff->vrt_header[0] & ~VRTH_PKT_SIZE_MASK) | (vrt_len & VRTH_PKT_SIZE_MASK); - // queue up another rx command when required - if (auto_reload_command && --streaming_frame_count == 0){ - streaming_frame_count = FRAMES_PER_CMD; - sr_rx_ctrl->time_secs = 0; - sr_rx_ctrl->time_ticks = 0; //enqueue last command - } - return false; // we didn't handle the packet } @@ -594,27 +477,6 @@ main(void) register_udp_listener(USRP2_UDP_CTRL_PORT, handle_udp_ctrl_packet); register_udp_listener(USRP2_UDP_DATA_PORT, handle_udp_data_packet); - hal_set_led_src(0, LEDS_SW); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - -//set them all to the atr settings by default -hal_gpio_set_sels(GPIO_TX_BANK, "aaaaaaaaaaaaaaaa"); -hal_gpio_set_sels(GPIO_RX_BANK, "aaaaaaaaaaaaaaaa"); - - output_regs->debug_mux_ctrl = 1; -#if DEBUG_MODE - hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); - hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - // initialize double buffering state machine for ethernet -> DSP Tx dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, @@ -662,13 +524,6 @@ hal_gpio_set_sels(GPIO_RX_BANK, "aaaaaaaaaaaaaaaa"); // FIXME Figure out how to handle this robustly. // Any buffers that are emptying should be allowed to drain... - if (auto_reload_command){ - // restart_streaming(); - // FIXME report error - } - else { - // FIXME report error - } putchar('O'); } } |