diff options
Diffstat (limited to 'firmware/microblaze/apps/cruft/serdes_to_dsp.c')
| -rw-r--r-- | firmware/microblaze/apps/cruft/serdes_to_dsp.c | 179 |
1 files changed, 0 insertions, 179 deletions
diff --git a/firmware/microblaze/apps/cruft/serdes_to_dsp.c b/firmware/microblaze/apps/cruft/serdes_to_dsp.c deleted file mode 100644 index 4994e0a69..000000000 --- a/firmware/microblaze/apps/cruft/serdes_to_dsp.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> - - -/* - * This program can respond to queries from the host - * and stream rx samples. - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu -//#define CPU_TX_BUF 1 // cpu -> eth - -#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> eth -#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // eth -> dsp tx - -/* - * ================================================================ - * configure DSP TX double buffering state machine - * ================================================================ - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - - -// ---------------------------------------------------------------- - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -void -start_rx_cmd(const eth_mac_addr_t *host, op_start_rx_t *p) -{ -} - -void -stop_rx_cmd(void) -{ -} - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - - int tx_scale = 256; - int interp = 32; - - op_config_tx_t def_config; - memset(&def_config, 0, sizeof(def_config)); - def_config.phase_inc = 408021893; // 9.5 MHz [2**32 * fc/fsample] - def_config.scale_iq = (tx_scale << 16) | tx_scale; - def_config.interp = interp; - - // setup Tx DSP regs - config_tx_cmd(&def_config); -} - - -inline static void -buffer_irq_handler(unsigned irq) -{ - //hal_toggle_leds(0x2); - - uint32_t status = buffer_pool_status->status; - - dbsm_process_status(&dsp_tx_sm, status); - - if (status & BPS_DONE(CPU_TX_BUF)){ - bp_clear_buf(CPU_TX_BUF); - } -} - -int -main(void) -{ - u2_init(); - - // Get our clock from the mimo interface - - clocks_enable_test_clk(true,1); - clocks_mimo_config(MC_WE_LOCK_TO_MIMO); - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\nserdes_to_dsp\n"); - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - // program tx registers - setup_tx(); - - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - while(1){ - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - } -} - |