diff options
Diffstat (limited to 'firmware/microblaze/apps/cruft/mimo_tx.c')
| -rw-r--r-- | firmware/microblaze/apps/cruft/mimo_tx.c | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/firmware/microblaze/apps/cruft/mimo_tx.c b/firmware/microblaze/apps/cruft/mimo_tx.c new file mode 100644 index 000000000..e0f8aa6fa --- /dev/null +++ b/firmware/microblaze/apps/cruft/mimo_tx.c @@ -0,0 +1,363 @@ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This is a down and dirty test program that confirms that the we can + * coherently transmit different signals to two USRP2s connected via a + * mimo cable. This code runs in the USRP2 connected to the ethernet. + * The other USRP runs mimo_tx_slave. The host runs test_mimo_tx. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "bsm12.h" +#include "mimo_app_common_v2.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include "clocks.h" + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Experimental code to transmit packets to DSP Tx and SERDES + * + * Hard wire the Tx config so we don't have to deal with control stuff yet. + */ + +#define BUF_BSM12_0 4 +#define BUF_BSM12_1 5 +#define BUF_BSM12_2 6 + +//#define CPU_TX_BUF 7 // cpu -> eth + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from ethernet +buf_cmd_args_t bsm12_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t bsm12_send0_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +// send to SERDES +buf_cmd_args_t bsm12_send1_args = { + PORT_SERDES, + 0, // starts just past transport header + 0 // filled in from last_line register +}; + +bsm12_t bsm12_sm; // the state machine + +#if 0 +/* + * ================================================================ + * configure DSP RX double buffering state machine (dsp -> eth) + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ETH +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine +#endif + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 1000 + +bool is_streaming(void){ return streaming_p; } + + +// ---------------------------------------------------------------- + + +void +restart_streaming(void) +{ +#if 0 + // setup RX DSP regs + dsp_rx_regs->clear_state = 1; // reset + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); // set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + dsp_rx_regs->rx_time = 0; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); + + dsp_rx_regs->rx_time = 0; // enqueue second command +#endif +} + +void +start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) +{ +#if 0 + host_mac_addr = *host; // remember who we're sending to + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, 0, 0); + // DSP RX will fill in timestamp + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); + + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + restart_streaming(); +#endif +} + + +void +stop_rx_cmd(void) +{ +#if 0 + streaming_p = false; + dsp_rx_regs->clear_state = 1; // flush cmd queue + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); +#endif +} + + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + + int tx_scale = 2500; + int interp = 8; // * 4 + + // setup some defaults + + dsp_tx_regs->freq = 429496730; // 10MHz + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp; +} + + +#if 0 +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +int +fw_sets_seqno_inspector(bsm12_t *sm, int buf_this) +{ + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; + + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + dsp_rx_regs->rx_time = 0; + } + + return false; // we didn't handle the packet +} +#endif +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + bsm12_process_status(&bsm12_sm, status); +} + +int +main(void) +{ + u2_init(); + + putstr("\nMIMO Tx\n"); + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + + output_regs->debug_mux_ctrl = 1; +#if 0 + hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + bsm12_init(&bsm12_sm, BUF_BSM12_0, + &bsm12_recv_args, &bsm12_send0_args, &bsm12_send1_args, + eth_pkt_inspector); + + +#if 0 + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; +#endif + + + // program tx registers + setup_tx(); + + // kick off the state machine + bsm12_start(&bsm12_sm); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + // dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + // dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} |