diff options
Diffstat (limited to 'firmware/microblaze/apps/cruft/eth_serdes.c')
| -rw-r--r-- | firmware/microblaze/apps/cruft/eth_serdes.c | 233 |
1 files changed, 233 insertions, 0 deletions
diff --git a/firmware/microblaze/apps/cruft/eth_serdes.c b/firmware/microblaze/apps/cruft/eth_serdes.c new file mode 100644 index 000000000..2d2ddc1ca --- /dev/null +++ b/firmware/microblaze/apps/cruft/eth_serdes.c @@ -0,0 +1,233 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_passthru_v2.h" +#include "memcpy_wa.h" +#include "clocks.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno __attribute__((unused)); // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between ethernet and serdes + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // serdes -> eth (double buffer) +#define DSP_RX_BUF_1 3 // serdes -> eth +#define DSP_TX_BUF_0 4 // eth -> serdes (double buffer) +#define DSP_TX_BUF_1 5 // eth -> serdes + +/* + * ================================================================ + * configure serdes double buffering state machine (eth -> serdes) + * ================================================================ + */ + + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to serdes +buf_cmd_args_t dsp_tx_send_args = { + PORT_SERDES, + 0, + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ==================================================================== + * configure serdes RX double buffering state machine (serdes -> eth) + * ==================================================================== + */ + +// receive from serdes +buf_cmd_args_t dsp_rx_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to ETH +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// ---------------------------------------------------------------- + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ + +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ +#if 0 + uint32_t *p = buffer_ram(buf_this); + uint32_t last_line = buffer_pool_status->last_line[buf_this] - sm->last_line_adj; + printf("fw_sets_seqno_inspector: buf_this = %d, last_line = %d\n", + buf_this, last_line); + + print_buffer(p, (last_line + 1)); +#endif + +#if 0 + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; +#endif + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + if (0 && (status & ~BPS_IDLE_ALL)){ + putstr("status = "); + puthex32_nl(status); + } + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int +main(void) +{ + u2_init(); + + output_regs->led_src = 0x3; // h/w controls bottom two bits + clocks_enable_test_clk(true, 1); + + putstr("\neth <-> serdes\n"); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + // clocks_mimo_config(MC_WE_LOCK_TO_SMA | MC_PROVIDE_CLK_TO_MIMO); + clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + +#if 1 + output_regs->debug_mux_ctrl = 1; + hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> serdes + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + // initialize double buffering state machine for serdes -> ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // kick off the state machines + dbsm_start(&dsp_tx_sm); + dbsm_start(&dsp_rx_sm); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + } +} |