diff options
Diffstat (limited to 'firmware/fx2')
| -rw-r--r-- | firmware/fx2/b100/usrp_common.c | 2 | ||||
| -rw-r--r-- | firmware/fx2/b100/usrp_main.c | 17 |
2 files changed, 11 insertions, 8 deletions
diff --git a/firmware/fx2/b100/usrp_common.c b/firmware/fx2/b100/usrp_common.c index 7aedce9f7..a8f29d1fa 100644 --- a/firmware/fx2/b100/usrp_common.c +++ b/firmware/fx2/b100/usrp_common.c @@ -33,7 +33,7 @@ init_usrp (void) CKCON = 0; // MOVX takes 2 cycles // IFCLK is generated internally and runs at 48 MHz; slave FIFO mode - IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFSLAVE; + IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE; SYNCDELAY; // configure IO ports (B and D are used by slave FIFO) diff --git a/firmware/fx2/b100/usrp_main.c b/firmware/fx2/b100/usrp_main.c index fdc4fce48..436bdeb36 100644 --- a/firmware/fx2/b100/usrp_main.c +++ b/firmware/fx2/b100/usrp_main.c @@ -81,6 +81,15 @@ static void initialize_gpif_buffer(int ep) { FIFORESET = 0x00; SYNCDELAY; } +void enable_xfers(int enable) { + if(enable) { + IFCONFIG |= bmIFSLAVE; + } else { + IFCONFIG &= ~bmIFSLAVE; + } + set_led_0(enable); +} + /* * Handle our "Vendor Extension" commands on endpoint 0. * If we handle this one, return non-zero. @@ -174,6 +183,7 @@ app_vendor_cmd (void) break; case VRQ_ENABLE_GPIF: + enable_xfers(wValueL); break; case VRQ_CLEAR_FPGA_FIFO: @@ -266,13 +276,6 @@ main (void) EA = 1; // global interrupt enable fx2_renumerate (); // simulates disconnect / reconnect - -// setup_flowstate_common(); - -//set up gpif slave mode here - //set slave FIFO mode - //set synchronous slave mode - ////both done in init_usrp() //set FLAGA, FLAGB, FLAGC, FLAGD to be EP2EF, EP4EF, EP6PF, EP8PF PINFLAGSAB = (bmEP2EF) | (bmEP4EF << 4); |