80 files changed, 9788 insertions, 0 deletions
diff --git a/firmware/fx2/.gitignore b/firmware/fx2/.gitignore
new file mode 100644
index 000000000..e9fd37231
--- /dev/null
+++ b/firmware/fx2/.gitignore
@@ -0,0 +1,2 @@
+/build
+*.sym
diff --git a/firmware/fx2/AUTHORS b/firmware/fx2/AUTHORS
new file mode 100644
index 000000000..c9cd35778
--- /dev/null
+++ b/firmware/fx2/AUTHORS
@@ -0,0 +1,4 @@
+Eric Blossom <eb@comsec.org>
+Josh Blum <josh@joshknows.com>
+Thomas Tsou <ttsou@vt.edu>
+Nick Foster <nick@nerdnetworks.org>
diff --git a/firmware/fx2/CMakeLists.txt b/firmware/fx2/CMakeLists.txt
new file mode 100644
index 000000000..f7f6e96ca
--- /dev/null
+++ b/firmware/fx2/CMakeLists.txt
@@ -0,0 +1,49 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
+set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/config/Toolchain-sdcc.cmake)
+PROJECT(USRP1 C)
+set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/config/")
+INCLUDE(FindPythonInterp)
+
+########################################################################
+# Set toolchain to use SDCC
+########################################################################
+# we're doing mixed ASM and C
+ENABLE_LANGUAGE(ASM_SDCC)
+
+########################################################################
+# C flags and linking flags
+########################################################################
+ADD_DEFINITIONS(-DHAVE_USRP2)
+set(CMAKE_C_LINK_FLAGS "--code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000'")
+set(CMAKE_C_FLAGS "--no-xinit-opt")
+
+########################################################################
+# Setup precompile tools
+########################################################################
+set(REG_GENERATOR ${CMAKE_SOURCE_DIR}/utils/generate_regs.py)
+set(EDIT_GPIF_USRP1 ${CMAKE_SOURCE_DIR}/utils/edit-gpif.py)
+set(EDIT_GPIF_B100 ${CMAKE_SOURCE_DIR}/utils/edit-gpif-b100.py)
+set(BUILD_EEPROM ${CMAKE_SOURCE_DIR}/utils/build_eeprom.py)
+
+########################################################################
+# Add the subdirectories
+########################################################################
+ADD_SUBDIRECTORY(usrp1)
+ADD_SUBDIRECTORY(b100)
diff --git a/firmware/fx2/b100/.gitignore b/firmware/fx2/b100/.gitignore
new file mode 100644
index 000000000..e27ec2046
--- /dev/null
+++ b/firmware/fx2/b100/.gitignore
@@ -0,0 +1,19 @@
+/*.ihx
+/*.lnk
+/*.lst
+/*.map
+/*.mem
+/*.rel
+/*.rst
+/*.sym
+/blink_leds.asm
+/usrp_common.asm
+/command_loop.asm
+/fpga.asm
+/*.asm
+/Makefile
+/Makefile.in
+/usrp_gpif.c
+/usrp_gpif_inline.h
+/Makefile.in
+/burn-usrp1p-eeprom
diff --git a/firmware/fx2/b100/CMakeLists.txt b/firmware/fx2/b100/CMakeLists.txt
new file mode 100644
index 000000000..438aa9207
--- /dev/null
+++ b/firmware/fx2/b100/CMakeLists.txt
@@ -0,0 +1,88 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+include_directories(${CMAKE_SOURCE_DIR}/common)
+
+#for usrp_common.h and the regs files...
+set(CMAKE_INCLUDE_CURRENT_DIR ON)
+
+#now make a lib to link against
+set(libb100_sources 
+    ${CMAKE_SOURCE_DIR}/common/delay.c
+    ${CMAKE_SOURCE_DIR}/common/fx2utils.c
+    ${CMAKE_SOURCE_DIR}/common/i2c.c
+    ${CMAKE_SOURCE_DIR}/common/init_gpif.c
+    ${CMAKE_SOURCE_DIR}/common/isr.c
+    ${CMAKE_SOURCE_DIR}/common/timer.c
+    ${CMAKE_SOURCE_DIR}/common/usb_common.c
+#    ${CMAKE_SOURCE_DIR}/common/spi.c
+)
+
+#file(GLOB libb100_c_sources ${CMAKE_SOURCE_DIR}/common/*.c)
+#file(GLOB libb100_a51_sources ${CMAKE_SOURCE_DIR}/common/*.a51)
+#list(APPEND libb100_sources ${libb100_c_sources} ${libb100_a51_sources})
+
+add_library(libb100 STATIC ${libb100_sources})
+
+# edit-gpif hacks up gpif.c for our purposes. no major surgery, just moving stuff around.
+set(GPIF_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/gpif.c)
+set(GPIF_SOURCE_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif.c)
+set(GPIF_HEADER_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif_inline.h)
+
+add_custom_command(
+        OUTPUT ${GPIF_SOURCE_OUTPUT}
+        DEPENDS ${EDIT_GPIF_B100}
+        COMMAND ${PYTHON_EXECUTABLE} ${EDIT_GPIF_B100} ${GPIF_SOURCE} ${GPIF_SOURCE_OUTPUT} ${GPIF_HEADER_OUTPUT}
+        COMMENT "Generating ${GPIF_SOURCE_OUTPUT}"
+)
+
+#file(GLOB b100_sources *.c)
+set(b100_sources 
+    ${CMAKE_SOURCE_DIR}/common/vectors.a51
+    usrp_main.c
+    usrp_common.c 
+    board_specific.c 
+    fpga_load.c 
+    fpga_rev2.c 
+    usrp_gpif.c 
+    usb_descriptors.a51
+    eeprom_io.c
+    ${CMAKE_SOURCE_DIR}/common/_startup.a51
+)
+
+set_source_files_properties(
+    ${CMAKE_CURRENT_SOURCE_DIR}/usrp_main.c
+    PROPERTIES COMPILE_FLAGS "--std-sdcc99 --opt-code-speed --fommit-frame-pointer"
+)
+
+add_executable(b100_fw ${b100_sources})
+target_link_libraries(b100_fw libb100)
+
+set(eeprom1p_sources
+    ${CMAKE_SOURCE_DIR}/common/eeprom_boot.a51
+    ${CMAKE_SOURCE_DIR}/common/eeprom_init.c
+    ${CMAKE_SOURCE_DIR}/common/_startup.a51
+)
+
+add_custom_target(b100_eeprom ALL
+    DEPENDS b100_boot
+    COMMAND objcopy -I ihex -O binary b100_boot.ihx b100_boot.bin
+    COMMAND ${PYTHON_EXECUTABLE} ${BUILD_EEPROM} -r2 b100_boot.bin b100_eeprom.bin
+)
+
+add_executable(b100_boot ${eeprom1p_sources})
+target_link_libraries(b100_boot libb100)
diff --git a/firmware/fx2/b100/board_specific.c b/firmware/fx2/b100/board_specific.c
new file mode 100644
index 000000000..993d925b3
--- /dev/null
+++ b/firmware/fx2/b100/board_specific.c
@@ -0,0 +1,70 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "usrp_common.h"
+
+void
+set_led_0 (unsigned char on)
+{
+  if (!on)			// active low
+    USRP_PC |= bmPC_LED0;
+  else
+    USRP_PC &= ~bmPC_LED0;
+}
+
+void 
+set_led_1 (unsigned char on)
+{
+  if (!on)			// active low
+    USRP_PC |= bmPC_LED1;
+  else
+    USRP_PC &= ~bmPC_LED1;
+}
+
+void
+toggle_led_0 (void)
+{
+  USRP_PC ^= bmPC_LED0;
+}
+
+void
+toggle_led_1 (void)
+{
+  USRP_PC ^= bmPC_LED1;
+}
+
+void
+set_sleep_bits (unsigned char bits, unsigned char mask)
+{
+  // NOP on usrp1
+}
+
+static xdata unsigned char xbuf[1];
+
+void
+init_board (void)
+{
+  //init_spi ();
+
+  //USRP_PC &= ~bmPC_nRESET;	// active low reset
+  //USRP_PC |= bmPC_nRESET;
+}
diff --git a/firmware/fx2/b100/eeprom_io.c b/firmware/fx2/b100/eeprom_io.c
new file mode 100644
index 000000000..9eeb53636
--- /dev/null
+++ b/firmware/fx2/b100/eeprom_io.c
@@ -0,0 +1,65 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "eeprom_io.h"
+#include "i2c.h"
+#include "delay.h"
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
+	     xdata unsigned char *buf, unsigned char len)
+{
+  // We setup a random read by first doing a "zero byte write".
+  // Writes carry an address.  Reads use an implicit address.
+
+  static xdata unsigned char cmd[1];
+  cmd[0] = eeprom_offset;
+  if (!i2c_write(i2c_addr, cmd, 1))
+    return 0;
+
+  return i2c_read(i2c_addr, buf, len);
+}
+
+
+#if 0
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
+	      const xdata unsigned char *buf, unsigned char len)
+{
+  static xdata unsigned char cmd[2];
+  unsigned char ok;
+
+  while (len-- > 0){
+    cmd[0] = eeprom_offset++;
+    cmd[1] = *buf++;
+    ok = i2c_write(i2c_addr, cmd, 2);
+    mdelay(10);		// delay 10ms worst case write time
+    if (!ok)
+      return 0;
+  }
+  return 1;
+}
+
+#endif
diff --git a/firmware/fx2/b100/eeprom_io.h b/firmware/fx2/b100/eeprom_io.h
new file mode 100644
index 000000000..558017b12
--- /dev/null
+++ b/firmware/fx2/b100/eeprom_io.h
@@ -0,0 +1,38 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef INCLUDED_EEPROM_IO_H
+#define INCLUDED_EEPROM_IO_H
+
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
+	     xdata unsigned char *buf, unsigned char len);
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
+	      const xdata unsigned char *buf, unsigned char len);
+
+
+#endif /* INCLUDED_EEPROM_IO_H */
diff --git a/firmware/fx2/b100/fpga_load.c b/firmware/fx2/b100/fpga_load.c
new file mode 100644
index 000000000..394c9f50e
--- /dev/null
+++ b/firmware/fx2/b100/fpga_load.c
@@ -0,0 +1,183 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "fpga_load.h"
+#include "delay.h"
+
+/*
+ * setup altera FPGA serial load (PS).
+ *
+ * On entry:
+ *	don't care
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_begin (void)
+{
+  USRP_ALTERA_CONFIG &= ~bmALTERA_BITS;		// clear all bits (NCONFIG low)
+  udelay (40);					// wait 40 us
+  USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG;	// set NCONFIG high
+
+  // ready to xfer now
+
+  return 1;
+}
+
+/*
+ * clock out the low bit of bits.
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+
+
+#if 0
+
+static void
+clock_out_config_byte (unsigned char bits)
+{
+  unsigned char i;
+
+  // clock out configuration byte, least significant bit first
+
+  for (i = 0; i < 8; i++){
+
+    bitALTERA_DATA0 = bits & 1;
+    bitALTERA_DCLK = 1;		/* set DCLK to 1 */
+    bitALTERA_DCLK = 0;		/* set DCLK to 0 */
+
+    bits = bits >> 1;
+  }
+}
+	
+#else
+
+static void 
+clock_out_config_byte (unsigned char bits) _naked
+{
+    _asm
+	mov	a, dpl
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rlc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	ret	
+
+    _endasm;
+}
+
+#endif
+
+static void
+clock_out_bytes (unsigned char bytecount,
+		 unsigned char xdata *p)
+{
+  while (bytecount-- > 0)
+    clock_out_config_byte (*p++);
+}
+
+/*
+ * Transfer block of bytes from packet to FPGA serial configuration port
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
+{
+  clock_out_bytes (bytecount, p);
+  return 1;
+}
+
+/*
+ * check for successful load...
+ */
+unsigned char
+fpga_load_end (void)
+{
+  unsigned char status = USRP_ALTERA_CONFIG;
+
+  if (!UC_BOARD_HAS_FPGA)			// always true if we don't have FPGA
+    return 1;
+
+  if (bitALTERA_CONF_DONE)
+    return 1;					// everything's cool
+
+  // I don't think this should happen.  It indicates that
+  // programming is still in progress.
+
+  return 0;
+}
diff --git a/firmware/fx2/b100/fpga_rev2.c b/firmware/fx2/b100/fpga_rev2.c
new file mode 100644
index 000000000..326a01732
--- /dev/null
+++ b/firmware/fx2/b100/fpga_rev2.c
@@ -0,0 +1,51 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "fpga.h"
+#include "fpga_regs_common.h"
+#include "usrp_common.h"
+#include "usrp_globals.h"
+
+unsigned char g_tx_reset = 0;
+unsigned char g_rx_reset = 0;
+
+void
+fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
+{
+	//nop
+}
+
+
+static xdata unsigned char regval[4] = {0, 0, 0, 0};
+
+// Resets both AD9862's and the FPGA serial bus interface.
+
+void
+fpga_set_reset (unsigned char on)
+{
+  on &= 0x1;
+
+  if (on){
+  }
+  else
+    ;
+}
diff --git a/firmware/fx2/b100/fpga_rev2.h b/firmware/fx2/b100/fpga_rev2.h
new file mode 100644
index 000000000..0773d1cd7
--- /dev/null
+++ b/firmware/fx2/b100/fpga_rev2.h
@@ -0,0 +1,44 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#ifndef INCLUDED_FPGA_REV1_H
+#define INCLUDED_FPGA_REV1_H
+
+/*
+ * return TRUE if FPGA internal fifo has room for a single packet
+ */
+#define fpga_has_room_for_data_packet()	(!(GPIFREADYSTAT & bmDATA_FIFO_FULL))
+#define fpga_has_room_for_ctrl_packet()	(!(GPIFREADYSTAT & bmCTRL_FIFO_FULL))
+
+/*
+ * return TRUE if FPGA internal fifo has at least one packet available
+ */
+#define fpga_has_data_packet_avail()		(!(GPIFREADYSTAT & bmDATA_EMPTY))
+#define fpga_has_ctrl_packet_avail()            (!(GPIFREADYSTAT & bmCTRL_EMPTY))
+
+#define fx2_has_ctrl_packet_avail()         (!(EP24FIFOFLGS & EP4FIFOEMPTY))
+#define fx2_has_data_packet_avail()         (!(EP24FIFOFLGS & EP2FIFOEMPTY))
+
+#define fx2_has_room_for_ctrl_packet()      (!(EP8CS & bmEPFULL))
+#define fx2_has_room_for_data_packet()      (!(EP6CS & bmEPFULL))
+
+#define fx2_gpif_is_idle()                  (GPIFTRIG & bmGPIF_IDLE) 
+
+#endif /* INCLUDED_FPGA_REV1_H */
diff --git a/firmware/fx2/b100/gpif.c b/firmware/fx2/b100/gpif.c
new file mode 100644
index 000000000..b499e4fcf
--- /dev/null
+++ b/firmware/fx2/b100/gpif.c
@@ -0,0 +1,292 @@
+// This program configures the General Programmable Interface (GPIF) for FX2.     
+// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 
+//                                                                                
+// DO NOT EDIT ...                  
+// GPIF Initialization              
+// Interface Timing      Async        
+// Internal Ready Init   IntRdy=1     
+// CTL Out Tristate-able Binary       
+// SingleWrite WF Select     1     
+// SingleRead WF Select      0     
+// FifoWrite WF Select       3     
+// FifoRead WF Select        2     
+// Data Bus Idle Drive   Tristate     
+// END DO NOT EDIT                  
+                                    
+// DO NOT EDIT ...       
+// GPIF Wave Names       
+// Wave 0   = singlerd     
+// Wave 1   = singlewr     
+// Wave 2   = FIFORd       
+// Wave 3   = FIFOWr       
+                         
+// GPIF Ctrl Outputs   Level   
+// CTL 0    = WEN#     CMOS        
+// CTL 1    = REN#     CMOS        
+// CTL 2    = OE#      CMOS        
+// CTL 3    = EP       CMOS        
+// CTL 4    = unused   CMOS        
+// CTL 5    = unused   CMOS        
+                               
+// GPIF Rdy Inputs         
+// RDY0     = EF#            
+// RDY1     = FF#            
+// RDY2     = DRDY         
+// RDY3     = CRDY         
+// RDY4     = unused         
+// RDY5     = TCXpire        
+// FIFOFlag = FIFOFlag       
+// IntReady = IntReady       
+// END DO NOT EDIT         
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 0: singlerd                                                                
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
+//   Term A                                                                                
+//   LFunc                                                                                 
+//   Term B                                                                                
+// Branch1                                                                                 
+// Branch0                                                                                 
+// Re-Exec                                                                                 
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         0         0         0         0         0         0         0    
+// REN#         0         0         0         0         0         0         0         0    
+// OE#          0         0         0         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 1: singlewr                                                                
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
+//   Term A           EF#                                                                  
+//   LFunc            AND                                                                  
+//   Term B           EF#                                                                  
+// Branch1            ThenIdle                                                             
+// Branch0            ElseIdle                                                             
+// Re-Exec            No                                                                   
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         1         1         1         1         1         1         0    
+// REN#         0         0         0         0         0         0         0         0    
+// OE#          0         0         0         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 2: FIFORd                                                                  
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             
+//   Term A           TCXpire             TCXpire                                          
+//   LFunc            AND                 AND                                              
+//   Term B           TCXpire             TCXpire                                          
+// Branch1            Then 2              ThenIdle                                         
+// Branch0            Else 1              ElseIdle                                         
+// Re-Exec            No                  No                                               
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         0         0         0         0         0         0         0    
+// REN#         1         0         0         0         0         0         0         0    
+// OE#          1         1         1         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 3: FIFOWr                                                                  
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
+//   Term A           TCXpire                                                              
+//   LFunc            AND                                                                  
+//   Term B           TCXpire                                                              
+// Branch1            ThenIdle                                                             
+// Branch0            Else 1                                                               
+// Re-Exec            No                                                                   
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         0         0         0         0         0         0         0    
+// REN#         0         0         0         0         0         0         0         0    
+// OE#          0         0         0         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+                                              
+// GPIF Program Code                          
+                                              
+// DO NOT EDIT ...                            
+#include "fx2.h"                            
+#include "fx2regs.h"                        
+#include "fx2sdly.h"     // SYNCDELAY macro 
+// END DO NOT EDIT                            
+                                              
+// DO NOT EDIT ...                     
+const char xdata WaveData[128] =     
+{                                      
+// Wave 0 
+/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 1 
+/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 2 
+/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
+// Wave 3 
+/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+};                     
+// END DO NOT EDIT     
+                       
+// DO NOT EDIT ...                     
+const char xdata FlowStates[36] =   
+{                                      
+/* Wave 0 FlowStates */ 0x81,0x2D,0x0E,0x00,0x00,0x04,0x03,0x02,0x00,
+/* Wave 1 FlowStates */ 0x81,0x2D,0x09,0x00,0x00,0x04,0x03,0x02,0x00,
+/* Wave 2 FlowStates */ 0x81,0x2D,0x06,0x00,0x00,0x04,0x03,0x02,0x00,
+/* Wave 3 FlowStates */ 0x81,0x2D,0x01,0x00,0x00,0x04,0x03,0x02,0x00,
+};                     
+// END DO NOT EDIT     
+                       
+// DO NOT EDIT ...                                               
+const char xdata InitData[7] =                                   
+{                                                                
+/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     
+};                                                               
+// END DO NOT EDIT                                               
+                                                                 
+// TO DO: You may add additional code below.
+
+void GpifInit( void )
+{
+  BYTE i;
+ 
+  // Registers which require a synchronization delay, see section 15.14
+  // FIFORESET        FIFOPINPOLAR
+  // INPKTEND         OUTPKTEND
+  // EPxBCH:L         REVCTL
+  // GPIFTCB3         GPIFTCB2
+  // GPIFTCB1         GPIFTCB0
+  // EPxFIFOPFH:L     EPxAUTOINLENH:L
+  // EPxFIFOCFG       EPxGPIFFLGSEL
+  // PINFLAGSxx       EPxFIFOIRQ
+  // EPxFIFOIE        GPIFIRQ
+  // GPIFIE           GPIFADRH:L
+  // UDMACRCH:L       EPxGPIFTRIG
+  // GPIFTRIG
+  
+  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
+  //      ...these have been replaced by GPIFTC[B3:B0] registers
+ 
+  // 8051 doesn't have access to waveform memories 'til
+  // the part is in GPIF mode.
+ 
+  IFCONFIG = 0xEE;
+  // IFCLKSRC=1   , FIFOs executes on internal clk source
+  // xMHz=1       , 48MHz internal clk rate
+  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz
+  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk
+  // ASYNC=1      , master samples asynchronous
+  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF
+  // IFCFG[1:0]=10, FX2 in GPIF master mode
+ 
+  GPIFABORT = 0xFF;  // abort any waveforms pending
+ 
+  GPIFREADYCFG = InitData[ 0 ];
+  GPIFCTLCFG = InitData[ 1 ];
+  GPIFIDLECS = InitData[ 2 ];
+  GPIFIDLECTL = InitData[ 3 ];
+  GPIFWFSELECT = InitData[ 5 ];
+  GPIFREADYSTAT = InitData[ 6 ];
+ 
+  // use dual autopointer feature... 
+  AUTOPTRSETUP = 0x07;          // inc both pointers, 
+                                // ...warning: this introduces pdata hole(s)
+                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)
+  
+  // source
+  AUTOPTRH1 = MSB( &WaveData );
+  AUTOPTRL1 = LSB( &WaveData );
+  
+  // destination
+  AUTOPTRH2 = 0xE4;
+  AUTOPTRL2 = 0x00;
+ 
+  // transfer
+  for ( i = 0x00; i < 128; i++ )
+  {
+    EXTAUTODAT2 = EXTAUTODAT1;
+  }
+ 
+// Configure GPIF Address pins, output initial value,
+  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]
+  OEC = 0xFF;         // and as outputs
+  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]
+  OEE |= 0x80;        // and as output
+ 
+// ...OR... tri-state GPIFADR[8:0] pins
+//  PORTCCFG = 0x00;  // [7:0] as port I/O
+//  OEC = 0x00;       // and as inputs
+//  PORTECFG &= 0x7F; // [8] as port I/O
+//  OEE &= 0x7F;      // and as input
+ 
+// GPIF address pins update when GPIFADRH/L written
+  SYNCDELAY;                    // 
+  GPIFADRH = 0x00;    // bits[7:1] always 0
+  SYNCDELAY;                    // 
+  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000
+ 
+// Configure GPIF FlowStates registers for Wave 0 of WaveData
+  FLOWSTATE = FlowStates[ 0 ];
+  FLOWLOGIC = FlowStates[ 1 ];
+  FLOWEQ0CTL = FlowStates[ 2 ];
+  FLOWEQ1CTL = FlowStates[ 3 ];
+  FLOWHOLDOFF = FlowStates[ 4 ];
+  FLOWSTB = FlowStates[ 5 ];
+  FLOWSTBEDGE = FlowStates[ 6 ];
+  FLOWSTBHPERIOD = FlowStates[ 7 ];
+}
+ 
diff --git a/firmware/fx2/b100/usb_descriptors.a51 b/firmware/fx2/b100/usb_descriptors.a51
new file mode 100644
index 000000000..6efeb8367
--- /dev/null
+++ b/firmware/fx2/b100/usb_descriptors.a51
@@ -0,0 +1,500 @@
+;;; -*- asm -*-
+;;;
+;;; Copyright 2003 Free Software Foundation, Inc.
+;;; 
+;;; This file is part of GNU Radio
+;;; 
+;;; GNU Radio is free software; you can redistribute it and/or modify
+;;; it under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3, or (at your option)
+;;; any later version.
+;;; 
+;;; GNU Radio is distributed in the hope that it will be useful,
+;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;; 
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Radio; see the file COPYING.  If not, write to
+;;; the Free Software Foundation, Inc., 51 Franklin Street,
+;;; Boston, MA 02110-1301, USA.
+;;;
+	
+;;; USB Descriptor table for the B100
+;;; 
+;;; We're a high-speed only device (480 Mb/sec) with 1 configuration
+;;; and 5 interfaces.  
+;;; 
+;;;	interface 0:	command and status (ep0 COMMAND)
+;;;	interface 1:	Transmit path (ep2 OUT BULK)
+;;;	interface 2:	Receive path (ep6 IN BULK)
+
+;;; interface 3:  Command transmit path (ep4 OUT BULK) for FPGA comms
+;;; interface 4:  Command receive path (ep8 IN BULK) for FPGA comms
+
+	.module usb_descriptors
+	
+	VID_FREE	 = 0x2500	; Ettus Research, LLC.
+	PID_USRP	 = 0x0002	; B100
+
+	;; We distinguish configured from unconfigured USRPs using the Device ID.
+	;; If the MSB of the DID is 0, the device is unconfigured.
+	;; The LSB of the DID is reserved for hardware revs.
+	
+	DID_USRP	 = 0x0100	; Device ID (bcd)
+
+	
+	DSCR_DEVICE	 =   1	; Descriptor type: Device
+	DSCR_CONFIG	 =   2	; Descriptor type: Configuration
+	DSCR_STRING	 =   3	; Descriptor type: String
+	DSCR_INTRFC	 =   4	; Descriptor type: Interface
+	DSCR_ENDPNT	 =   5	; Descriptor type: Endpoint
+	DSCR_DEVQUAL	 =   6	; Descriptor type: Device Qualifier
+	
+	DSCR_DEVICE_LEN	 =  18
+	DSCR_CONFIG_LEN  =   9
+	DSCR_INTRFC_LEN  =   9
+	DSCR_ENDPNT_LEN  =   7
+	DSCR_DEVQUAL_LEN =  10
+	
+	ET_CONTROL	 =   0	; Endpoint type: Control
+	ET_ISO		 =   1	; Endpoint type: Isochronous
+	ET_BULK		 =   2	; Endpoint type: Bulk
+	ET_INT		 =   3	; Endpoint type: Interrupt
+	
+	
+	;; configuration attributes
+	bmSELF_POWERED	=	1 << 6
+
+;;; --------------------------------------------------------
+;;;	external ram data
+;;;--------------------------------------------------------
+	
+	.area USBDESCSEG    (XDATA)
+	
+;;; ----------------------------------------------------------------
+;;; descriptors used when operating at high speed (480Mb/sec)
+;;; ----------------------------------------------------------------
+	
+	.even	; descriptors must be 2-byte aligned for SUDPTR{H,L} to work
+
+	;; The .even directive isn't really honored by the linker.  Bummer!
+	;; (There's no way to specify an alignment requirement for a given area,
+	;; hence when they're concatenated together, even doesn't work.)
+	;; 
+	;; We work around this by telling the linker to put USBDESCSEG
+	;; at 0xE000 absolute.  This means that the maximimum length of this
+	;; segment is 480 bytes, leaving room for the two hash slots 
+	;; at 0xE1EO to 0xE1FF.  
+	;; 
+	;; As of July 7, 2004, this segment is 326 bytes long
+  ;; As of Sept 2, 2010, this segment is 416 bytes long
+	
+_high_speed_device_descr::
+	.db	DSCR_DEVICE_LEN
+	.db	DSCR_DEVICE
+	.db	<0x0200		; Specification version (LSB)
+	.db	>0x0200		; Specification version (MSB)
+	.db	0xff		; device class (vendor specific)
+	.db	0xff		; device subclass (vendor specific)
+	.db	0xff		; device protocol (vendor specific)
+	.db	64		; bMaxPacketSize0 for endpoint 0
+	.db	<VID_FREE	; idVendor
+	.db	>VID_FREE	; idVendor
+	.db	<PID_USRP	; idProduct
+	.db	>PID_USRP	; idProduct
+_usb_desc_hw_rev_binary_patch_location_0::
+	.db	<DID_USRP	; bcdDevice
+	.db	>DID_USRP	; bcdDevice
+	.db	SI_VENDOR	; iManufacturer (string index)
+	.db	SI_PRODUCT	; iProduct (string index)
+	.db	SI_SERIAL	; iSerial number (string index)
+	.db	1		; bNumConfigurations
+	
+;;; describes the other speed (12Mb/sec)
+	.even
+_high_speed_devqual_descr::
+	.db	DSCR_DEVQUAL_LEN
+	.db	DSCR_DEVQUAL
+	.db	<0x0200		; bcdUSB (LSB)
+	.db	>0x0200		; bcdUSB (MSB)
+	.db	0xff		; bDeviceClass
+	.db	0xff		; bDeviceSubClass
+	.db	0xff		; bDeviceProtocol
+	.db	64		; bMaxPacketSize0
+	.db	1		; bNumConfigurations (one config at 12Mb/sec)
+	.db	0		; bReserved
+	
+	.even
+_high_speed_config_descr::	
+	.db	DSCR_CONFIG_LEN
+	.db	DSCR_CONFIG
+	.db	<(_high_speed_config_descr_end - _high_speed_config_descr) ; LSB
+	.db	>(_high_speed_config_descr_end - _high_speed_config_descr) ; MSB
+	.db	5		; bNumInterfaces
+	.db	1		; bConfigurationValue
+	.db	0		; iConfiguration
+	.db	0x80 | bmSELF_POWERED ; bmAttributes
+	.db	0		; bMaxPower
+
+	;; interface descriptor 0 (command & status, ep0 COMMAND)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	0		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	0		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
+
+	;; interface descriptor 1 (transmit path, ep2 OUT BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	1		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_TX_PATH	; iInterface (description)
+
+	;; interface 1's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x02		; bEndpointAddress (ep 2 OUT)
+	.db	ET_BULK		; bmAttributes
+	.db	<512		; wMaxPacketSize (LSB)
+	.db	>512		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+	;; interface descriptor 2 (receive path, ep6 IN BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	2		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_RX_PATH	; iInterface (description)
+
+	;; interface 2's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x86		; bEndpointAddress (ep 6 IN)
+	.db	ET_BULK		; bmAttributes
+	.db	<512		; wMaxPacketSize (LSB)
+	.db	>512		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+	;; interface descriptor 3 (FPGA command OUT path, ep4 OUT BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	3		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_FPGA_COMMAND_OUT_PATH	; iInterface (description)
+
+	;; interface 3's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x04		; bEndpointAddress (ep 4 OUT)
+	.db	ET_BULK		; bmAttributes
+	.db	<32		; wMaxPacketSize (LSB)
+	.db	>32		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+	;; interface descriptor 4 (FPGA command IN path, ep8 IN BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	4		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_FPGA_COMMAND_IN_PATH	; iInterface (description)
+
+	;; interface 4's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x88		; bEndpointAddress (ep 8 IN)
+	.db	ET_BULK		; bmAttributes
+	.db	<32		; wMaxPacketSize (LSB)
+	.db	>32		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+
+_high_speed_config_descr_end:		
+
+;;; ----------------------------------------------------------------
+;;; descriptors used when operating at full speed (12Mb/sec)
+;;; ----------------------------------------------------------------
+
+	.even
+_full_speed_device_descr::	
+	.db	DSCR_DEVICE_LEN
+	.db	DSCR_DEVICE
+	.db	<0x0200		; Specification version (LSB)
+	.db	>0x0200		; Specification version (MSB)
+	.db	0xff		; device class (vendor specific)
+	.db	0xff		; device subclass (vendor specific)
+	.db	0xff		; device protocol (vendor specific)
+	.db	64		; bMaxPacketSize0 for endpoint 0
+	.db	<VID_FREE	; idVendor
+	.db	>VID_FREE	; idVendor
+	.db	<PID_USRP	; idProduct
+	.db	>PID_USRP	; idProduct
+_usb_desc_hw_rev_binary_patch_location_1::
+	.db	<DID_USRP	; bcdDevice
+	.db	>DID_USRP	; bcdDevice
+	.db	SI_VENDOR	; iManufacturer (string index)
+	.db	SI_PRODUCT	; iProduct (string index)
+	.db	SI_NONE		; iSerial number (None)
+	.db	1		; bNumConfigurations
+	
+	
+;;; describes the other speed (480Mb/sec)
+	.even
+_full_speed_devqual_descr::
+	.db	DSCR_DEVQUAL_LEN
+	.db	DSCR_DEVQUAL
+	.db	<0x0200		; bcdUSB
+	.db	>0x0200		; bcdUSB
+	.db	0xff		; bDeviceClass
+	.db	0xff		; bDeviceSubClass
+	.db	0xff		; bDeviceProtocol
+	.db	64		; bMaxPacketSize0
+	.db	1		; bNumConfigurations (one config at 480Mb/sec)
+	.db	0		; bReserved
+	
+	.even
+_full_speed_config_descr::	
+	.db	DSCR_CONFIG_LEN
+	.db	DSCR_CONFIG
+	.db	<(_full_speed_config_descr_end - _full_speed_config_descr) ; LSB
+	.db	>(_full_speed_config_descr_end - _full_speed_config_descr) ; MSB
+	.db	1		; bNumInterfaces
+	.db	1		; bConfigurationValue
+	.db	0		; iConfiguration
+	.db	0x80 | bmSELF_POWERED ; bmAttributes
+	.db	0		; bMaxPower
+
+	;; interface descriptor 0 (command & status, ep0 COMMAND)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	0		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	0		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
+	
+_full_speed_config_descr_end:	
+	
+;;; ----------------------------------------------------------------
+;;;			string descriptors
+;;; ----------------------------------------------------------------
+
+_nstring_descriptors::
+	.db	(_string_descriptors_end - _string_descriptors) / 2
+
+_string_descriptors::
+	.db	<str0, >str0
+	.db	<str1, >str1
+	.db	<str2, >str2
+	.db	<str3, >str3
+	.db	<str4, >str4
+	.db	<str5, >str5
+	.db	<str6, >str6
+	.db <str7, >str7
+	.db <str8, >str8
+_string_descriptors_end:
+
+	SI_NONE = 0
+	;; str0 contains the language ID's.
+	.even
+str0:	.db	str0_end - str0
+	.db	DSCR_STRING
+	.db	0
+	.db	0
+	.db	<0x0409		; magic code for US English (LSB)
+	.db	>0x0409		; magic code for US English (MSB)
+str0_end:
+
+	SI_VENDOR = 1
+	.even
+str1:	.db	str1_end - str1
+	.db	DSCR_STRING
+	.db	'F, 0		; 16-bit unicode
+	.db	'r, 0
+	.db	'e, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'S, 0
+	.db	'o, 0
+	.db	'f, 0
+	.db	't, 0
+	.db	'w, 0
+	.db	'a, 0
+	.db	'r, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'F, 0
+	.db	'o, 0
+	.db	'l, 0
+	.db	'k, 0
+	.db	's, 0
+str1_end:
+
+	SI_PRODUCT = 2
+	.even
+str2:	.db	str2_end - str2
+	.db	DSCR_STRING
+	.db	'U, 0
+	.db	'S, 0
+	.db	'R, 0
+	.db	'P, 0
+	.db '1, 0
+	.db 'P, 0
+	.db	' , 0
+	.db	'R, 0
+	.db	'e, 0
+	.db	'v, 0
+	.db	' , 0
+_usb_desc_hw_rev_ascii_patch_location_0::
+	.db	'?, 0
+str2_end:
+
+	SI_COMMAND_AND_STATUS = 3
+	.even
+str3:	.db	str3_end - str3
+	.db	DSCR_STRING
+	.db	'C, 0
+	.db	'o, 0
+	.db	'm, 0
+	.db	'm, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	'd, 0
+	.db	' , 0
+	.db	'&, 0
+	.db	' , 0
+	.db	'S, 0
+	.db	't, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'u, 0
+	.db	's, 0
+str3_end:
+
+	SI_TX_PATH = 4
+	.even
+str4:	.db	str4_end - str4
+	.db	DSCR_STRING
+	.db	'T, 0
+	.db	'r, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	's, 0
+	.db	'm, 0
+	.db	'i, 0
+	.db	't, 0
+	.db	' , 0
+	.db	'P, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'h, 0
+str4_end:
+
+	SI_RX_PATH = 5
+	.even
+str5:	.db	str5_end - str5
+	.db	DSCR_STRING
+	.db	'R, 0
+	.db	'e, 0
+	.db	'c, 0
+	.db	'e, 0
+	.db	'i, 0
+	.db	'v, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'P, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'h, 0
+str5_end:
+
+	SI_SERIAL = 6
+	.even
+str6:	.db	str6_end - str6
+	.db	DSCR_STRING
+_usb_desc_serial_number_ascii::
+	.db	'3, 0
+	.db	'., 0
+	.db	'1, 0
+	.db	'4, 0
+	.db	'1, 0
+	.db	'5, 0
+	.db	'9, 0
+	.db	'2, 0
+	.db	'7, 0
+str6_end:
+
+	SI_FPGA_COMMAND_OUT_PATH = 7
+	.even
+str7:	.db	str7_end - str7
+	.db	DSCR_STRING
+	.db	'F, 0
+	.db	'P, 0
+	.db	'G, 0
+	.db	'A, 0
+	.db	' , 0
+	.db	'C, 0
+	.db	'o, 0
+	.db	'm, 0
+	.db	'm, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	'd, 0
+	.db	' , 0
+	.db	'O, 0
+	.db	'u, 0
+	.db	't, 0
+str7_end:
+
+	SI_FPGA_COMMAND_IN_PATH = 8
+	.even
+str8:	.db	str8_end - str8
+	.db	DSCR_STRING
+	.db	'F, 0
+	.db	'P, 0
+	.db	'G, 0
+	.db	'A, 0
+	.db	' , 0
+	.db	'C, 0
+	.db	'o, 0
+	.db	'm, 0
+	.db	'm, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	'd, 0
+	.db	' , 0
+	.db	'I, 0
+	.db	'n, 0
+str8_end:
diff --git a/firmware/fx2/b100/usrp_common.c b/firmware/fx2/b100/usrp_common.c
new file mode 100644
index 000000000..a21353688
--- /dev/null
+++ b/firmware/fx2/b100/usrp_common.c
@@ -0,0 +1,117 @@
+/*
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/* 
+ * common code for USRP
+ */
+
+#include "usrp_common.h"
+
+void init_board (void);
+
+void
+init_usrp (void)
+{
+  CPUCS = bmCLKSPD1;	// CPU runs @ 48 MHz
+  CKCON = 0;		// MOVX takes 2 cycles
+
+  // IFCLK is generated internally and runs at 48 MHz, external clk en
+  IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE;
+  SYNCDELAY;
+
+  // configure IO ports (B and D are used by slave FIFO)
+  IOA = bmPORT_A_INITIAL;	// Port A initial state
+  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
+
+  IOC = bmPORT_C_INITIAL;	// Port C initial state
+  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
+
+  IOE = bmPORT_E_INITIAL;	// Port E initial state
+  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
+
+
+  //REVCTL = bmDYN_OUT | bmENH_PKT;			// highly recommended by docs
+  // SYNCDELAY;
+  
+  // configure end points
+  EP1OUTCFG = bmVALID | bmBULK;				SYNCDELAY;
+  EP1INCFG  = bmVALID | bmBULK | bmIN;			SYNCDELAY;
+
+  EP2CFG    = bmVALID | bmBULK | bmDOUBLEBUF;		SYNCDELAY;	// 512 dbl bulk OUT
+  EP4CFG    = bmVALID | bmBULK | bmDOUBLEBUF;		SYNCDELAY;	// 512 dbl bulk OUT
+  EP6CFG    = bmVALID | bmBULK | bmDOUBLEBUF | bmIN;	SYNCDELAY;	// 512 dbl bulk IN
+  EP8CFG    = bmVALID | bmBULK | bmDOUBLEBUF | bmIN;	SYNCDELAY;	// 512 dbl bulk IN
+
+  // reset FIFOs
+  FIFORESET = bmNAKALL;					SYNCDELAY;
+  FIFORESET = 2;					SYNCDELAY;
+  FIFORESET = 4;					SYNCDELAY;
+  FIFORESET = 6;					SYNCDELAY;
+  FIFORESET = 8;					SYNCDELAY;
+  FIFORESET = 0;					SYNCDELAY;
+  
+  // configure end point FIFOs
+  // let core see 0 to 1 transistion of autoin/out bit
+  EP2FIFOCFG =             bmWORDWIDE;			SYNCDELAY;
+  EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE;			SYNCDELAY;
+  EP6FIFOCFG = bmZEROLENIN            | bmWORDWIDE;			SYNCDELAY;
+  EP6FIFOCFG = bmZEROLENIN | bmAUTOIN | bmWORDWIDE;			SYNCDELAY;
+  EP4FIFOCFG =             bmWORDWIDE;      SYNCDELAY;
+  EP4FIFOCFG = bmAUTOOUT | bmWORDWIDE;      SYNCDELAY;
+  EP8FIFOCFG = bmZEROLENIN |            bmWORDWIDE;      SYNCDELAY;
+  EP8FIFOCFG = bmZEROLENIN | bmAUTOIN | bmWORDWIDE;      SYNCDELAY;
+
+  EP0BCH = 0;			SYNCDELAY;
+  // arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
+  EP1OUTBC = 0;			SYNCDELAY;
+
+  // set autoin length for EP6/EP8
+  EP6AUTOINLENH = (512) >> 8;	SYNCDELAY;  // this is the length for high speed
+  EP6AUTOINLENL = (512) & 0xff; SYNCDELAY;
+  EP8AUTOINLENH = (32) >> 8; SYNCDELAY;
+  EP8AUTOINLENL = (32) & 0xff; SYNCDELAY;
+
+  //set FLAGA, FLAGB, FLAGC, FLAGD to be EP2EF, EP4EF, EP6PF, EP8PF
+  PINFLAGSAB = (bmEP2EF) | (bmEP4EF << 4);
+  PINFLAGSCD = (bmEP6PF) | (bmEP8PF << 4);
+
+  //ok as far as i can tell, DECIS is reversed compared to the FX2 TRM.
+  //p15.34 says DECIS high implements [assert when (fill > level)], observed opposite
+  EP6FIFOPFH = 0x09;
+  SYNCDELAY;
+  EP6FIFOPFL = 0xFD;
+  SYNCDELAY;
+
+//  EP2FIFOPFH = 0x08;
+//  SYNCDELAY;
+// EP2FIFOPFL = 0x00;
+//  SYNCDELAY;
+
+  //assert FIFOEMPTY one cycle sooner so we get it in time at the FPGA
+  EP2FIFOCFG |= bmBIT5; 
+  
+  //set FIFOPINPOLAR to normal (active low) mode
+  FIFOPINPOLAR = 0x00;
+  SYNCDELAY;
+  PORTACFG = 0x80;
+
+  init_board ();
+}
+
diff --git a/firmware/fx2/b100/usrp_main.c b/firmware/fx2/b100/usrp_main.c
new file mode 100644
index 000000000..7c4dd479d
--- /dev/null
+++ b/firmware/fx2/b100/usrp_main.c
@@ -0,0 +1,285 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "usrp_commands.h"
+#include "fpga.h"
+#include "timer.h"
+#include "i2c.h"
+#include "isr.h"
+#include "usb_common.h"
+#include "fx2utils.h"
+#include "usrp_globals.h"
+#include "usrp_i2c_addr.h"
+#include <string.h>
+#include "eeprom_io.h"
+#include "usb_descriptors.h"
+
+/*
+ * offsets into boot eeprom for configuration values
+ */
+#define	HW_REV_OFFSET		  5
+#define SERIAL_NO_OFFSET	247
+#define SERIAL_NO_LEN		  9
+
+
+#define	bRequestType	SETUPDAT[0]
+#define	bRequest	SETUPDAT[1]
+#define	wValueL		SETUPDAT[2]
+#define	wValueH		SETUPDAT[3]
+#define	wIndexL		SETUPDAT[4]
+#define	wIndexH		SETUPDAT[5]
+#define	wLengthL	SETUPDAT[6]
+#define	wLengthH	SETUPDAT[7]
+
+
+unsigned char g_tx_enable = 0;
+unsigned char g_rx_enable = 0;
+unsigned char g_rx_overrun = 0;
+unsigned char g_tx_underrun = 0;
+bit enable_gpif = 0;
+
+/*
+ * the host side fpga loader code pushes an MD5 hash of the bitstream
+ * into hash1.
+ */
+#define	  USRP_HASH_SIZE      16
+xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
+
+//void clear_fpga_data_fifo(void);
+
+//use the B100 fpga_config_cclk/ext_reset line to reset the FPGA
+void fpga_reset(int level) {
+    bitALTERA_DCLK = level;
+}
+
+static void
+get_ep0_data (void)
+{
+  EP0BCL = 0;			// arm EP0 for OUT xfer.  This sets the busy bit
+
+  while (EP0CS & bmEPBUSY)	// wait for busy to clear
+    ;
+}
+
+static void clear_fifo(int ep) {
+  FIFORESET = 0x80; SYNCDELAY; //activate NAKALL
+  FIFORESET = ep; SYNCDELAY;
+  FIFORESET = 0x00; SYNCDELAY;
+}
+
+void enable_xfers(int enable) {
+    if(enable) {
+        IFCONFIG |= bmIFSLAVE;
+    } else {
+        IFCONFIG &= ~bmIFSLAVE;
+    }
+    set_led_0(enable);
+}
+
+/*
+ * Handle our "Vendor Extension" commands on endpoint 0.
+ * If we handle this one, return non-zero.
+ */
+unsigned char
+app_vendor_cmd (void)
+{
+  if (bRequestType == VRT_VENDOR_IN){
+
+    /////////////////////////////////
+    //    handle the IN requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_GET_STATUS: //this is no longer done via FX2 -- the FPGA will be queried instead
+      return 0;
+      break;
+
+    case VRQ_I2C_READ:
+      if (!i2c_read (wValueL, EP0BUF, wLengthL)) return 0;
+        EP0BCH = 0;
+        EP0BCL = wLengthL;
+        break;
+      
+    case VRQ_SPI_READ:
+      return 0;
+
+    case VRQ_FW_COMPAT:
+        EP0BCH = 0;
+        EP0BCL = 3;
+        break;
+
+    default:
+      return 0;
+    }
+  }
+
+  else if (bRequestType == VRT_VENDOR_OUT){
+
+    /////////////////////////////////
+    //    handle the OUT requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_SET_LED:
+      switch (wIndexL){
+      case 0:
+        set_led_0 (wValueL);
+        break;
+	
+      case 1:
+        set_led_1 (wValueL);
+        break;
+	
+      default:
+        return 0;
+      }
+      break;
+      
+    case VRQ_FPGA_LOAD:
+      switch (wIndexL){			// sub-command
+      case FL_BEGIN:
+        return fpga_load_begin ();
+	
+      case FL_XFER:
+        get_ep0_data ();
+        return fpga_load_xfer (EP0BUF, EP0BCL);
+	
+      case FL_END:
+        return fpga_load_end ();
+	
+      default:
+        return 0;
+      }
+      break;
+
+    case VRQ_FPGA_SET_RESET:
+      fpga_reset(wValueL);
+      break;
+
+    case VRQ_I2C_WRITE:
+      get_ep0_data ();
+      if (!i2c_write (wValueL, EP0BUF, EP0BCL)) return 0;
+      //USRP_LED_REG ^= bmLED1;
+      break;
+      
+    case VRQ_RESET_GPIF:
+      clear_fifo(wValueL);
+      break;
+      
+    case VRQ_ENABLE_GPIF:
+      enable_xfers(wValueL);
+      break;
+    
+    case VRQ_CLEAR_FPGA_FIFO:
+        //clear_fpga_data_fifo();
+        break;
+
+    default:
+      return 0;
+    }
+
+  }
+  else
+    return 0;    // invalid bRequestType
+
+  return 1;
+}
+
+static void
+main_loop (void)
+{
+  while (1){
+    if (usb_setup_packet_avail ())
+      usb_handle_setup_packet ();
+  }
+}
+
+/*
+ * called at 100 Hz from timer2 interrupt
+ *
+ * Toggle led 0
+ */
+void
+isr_tick (void) interrupt
+{
+  static unsigned char	count = 1;
+  
+  if (--count == 0){
+    count = 50;
+    USRP_LED_REG ^= bmLED0;
+  }
+
+  clear_timer_irq ();
+}
+
+/*
+ * Read h/w rev code and serial number out of boot eeprom and
+ * patch the usb descriptors with the values.
+ */
+void
+patch_usb_descriptors(void)
+{
+  static xdata unsigned char hw_rev;
+  static xdata unsigned char serial_no[SERIAL_NO_LEN];
+  unsigned char i;
+
+  eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1);	// LSB of device id
+  usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev;
+  usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev;
+  usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0';     // FIXME if we get > 9
+
+  eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN);
+
+  for (i = 0; i < SERIAL_NO_LEN; i++){
+    unsigned char ch = serial_no[i];
+    if (ch == 0xff)	// make unprogrammed EEPROM default to '0'
+      ch = '0';
+    usb_desc_serial_number_ascii[i << 1] = ch;
+  }
+}
+
+void
+main (void)
+{
+  memset (hash1, 0, USRP_HASH_SIZE);	// zero fpga bitstream hash.  This forces reload
+  
+  init_usrp ();
+
+  set_led_0 (0);
+  set_led_1 (0);
+  
+  EA = 0;		// disable all interrupts
+
+  patch_usb_descriptors();
+
+  setup_autovectors ();
+  usb_install_handlers ();
+  //hook_timer_tick ((unsigned short) isr_tick);
+
+  EIEX4 = 1;		// disable INT4 FIXME
+  EA = 1;		// global interrupt enable
+
+  fx2_renumerate ();	// simulates disconnect / reconnect
+  
+  main_loop ();
+}
diff --git a/firmware/fx2/b100/usrp_regs.h b/firmware/fx2/b100/usrp_regs.h
new file mode 100644
index 000000000..3d65337f5
--- /dev/null
+++ b/firmware/fx2/b100/usrp_regs.h
@@ -0,0 +1,102 @@
+/*
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/*
+ * These are the register definitions for the Rev 1 USRP prototype
+ * The Rev 1 is the version with the AD9862's and daughterboards
+ */
+
+#ifndef _B100_REGS_H_
+#define _B100_REGS_H_
+
+#include "fx2regs.h"
+
+/*
+ * Port A (bit addressable):
+ */
+
+#define USRP_PA			IOA		// Port A
+#define	USRP_PA_OE		OEA		// Port A direction register
+
+#define	USRP_ALTERA_CONFIG	USRP_PA   // Now on port A, not C
+
+#define bmALTERA_DCLK		bmBIT0
+#define bmALTERA_NCONFIG	bmBIT1
+#define bmALTERA_DATA0		bmBIT3
+#define bmALTERA_NSTATUS	bmBIT4
+
+#define	bmALTERA_BITS		(bmALTERA_DCLK			\
+				 | bmALTERA_NCONFIG		\
+				 | bmALTERA_DATA0		\
+				 | bmALTERA_NSTATUS		\
+				)
+
+
+#define	bmPORT_A_OUTPUTS	(bmALTERA_DCLK			\
+			 	 | bmALTERA_NCONFIG		\
+				 | bmALTERA_DATA0		\
+				)
+
+#define	bmPORT_A_INITIAL	0
+
+#define PORT_A_ADDR 0x80
+#define PORT_C_ADDR 0xA0
+
+sbit at PORT_A_ADDR+0 bitALTERA_DCLK;	// 0x80 is the bit address of PORT A
+sbit at PORT_A_ADDR+1 bitALTERA_NCONFIG;
+sbit at PORT_A_ADDR+3 bitALTERA_DATA0;
+
+sbit at PORT_C_ADDR+7 bitALTERA_CONF_DONE;
+
+
+/* Port B: GPIF	FD[7:0]			*/
+
+/*
+ * Port C (bit addressable):
+ *    5:1 FPGA configuration
+ */
+
+#define	USRP_PC			IOC		// Port C
+#define	USRP_PC_OE		OEC		// Port C direction register
+
+#define	bmPC_nRESET		0 //bmBIT0		// reset line to codecs (active low)
+#define	bmPC_LED0		bmBIT0		// active low
+#define	bmPC_LED1		bmBIT1		// active low
+
+#define	bmPORT_C_OUTPUTS	(bmPC_LED0 | bmPC_LED1)
+#define	bmPORT_C_INITIAL	(bmPC_LED0 | bmPC_LED1)
+
+
+#define	USRP_LED_REG		USRP_PC
+#define	bmLED0			bmPC_LED0
+#define	bmLED1			bmPC_LED1
+
+
+/* Port D: GPIF	FD[15:8]		*/
+
+/* Port E: not bit addressible		*/
+
+#define	USRP_PE			IOE		// Port E
+#define	USRP_PE_OE		OEE		// Port E direction register
+
+#define	bmPORT_E_OUTPUTS	(0)
+#define	bmPORT_E_INITIAL	(0)
+
+#endif /* _USRP_REV1_REGS_H_ */
diff --git a/firmware/fx2/common/.gitignore b/firmware/fx2/common/.gitignore
new file mode 100644
index 000000000..04f253234
--- /dev/null
+++ b/firmware/fx2/common/.gitignore
@@ -0,0 +1,18 @@
+/*.ihx
+/*.lnk
+/*.lst
+/*.map
+/*.mem
+/*.rel
+/*.rst
+/*.sym
+/blink_leds.asm
+/usrp_common.asm
+/command_loop.asm
+/fpga.asm
+/*.asm
+/usrp_gpif.c
+/usrp_gpif_inline.h
+/*.lib
+/Makefile
+/Makefile.in
diff --git a/firmware/fx2/common/_startup.a51 b/firmware/fx2/common/_startup.a51
new file mode 100644
index 000000000..30a907857
--- /dev/null
+++ b/firmware/fx2/common/_startup.a51
@@ -0,0 +1,80 @@
+;;; -*- asm -*-
+;;;
+;;; Copyright 2003,2004 Free Software Foundation, Inc.
+;;; 
+;;; This file is part of GNU Radio
+;;; 
+;;; GNU Radio is free software; you can redistribute it and/or modify
+;;; it under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3, or (at your option)
+;;; any later version.
+;;; 
+;;; GNU Radio is distributed in the hope that it will be useful,
+;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;; 
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Radio; see the file COPYING.  If not, write to
+;;; the Free Software Foundation, Inc., 51 Franklin Street,
+;;; Boston, MA 02110-1301, USA.
+
+    
+;;; The default external memory initialization provided by sdcc is not
+;;; appropriate to the FX2.  This is derived from the sdcc code, but uses 
+;;; the FX2 specific _MPAGE sfr.
+
+
+	;; .area XISEG   (XDATA)  ; the initialized external data area
+	;; .area XINIT   (CODE)	  ; the code space consts to init XISEG
+	.area XSEG    (XDATA)	  ; zero initialized xdata
+	.area USBDESCSEG (XDATA)  ; usb descriptors
+
+	
+	.area CSEG    (CODE)
+
+	;; sfr that sets upper address byte of MOVX using @r0 or @r1
+	_MPAGE	=	0x0092
+
+__sdcc_external_startup::
+	;; This system is now compiled with the --no-xinit-opt 
+	;; which means that any initialized XDATA is handled
+	;; inline by code in the GSINIT segs emitted for each file.
+	;; 
+	;; We zero XSEG and all of the internal ram to ensure 
+	;; a known good state for uninitialized variables.
+
+;	_mcs51_genRAMCLEAR() start
+	mov	r0,#l_XSEG
+	mov	a,r0
+	orl	a,#(l_XSEG >> 8)
+	jz	00002$
+	mov	r1,#((l_XSEG + 255) >> 8)
+	mov	dptr,#s_XSEG
+	clr     a
+	
+00001$:	movx	@dptr,a
+	inc	dptr
+	djnz	r0,00001$
+	djnz	r1,00001$
+	
+	;; We're about to clear internal memory.  This will overwrite
+	;; the stack which contains our return address.
+	;; Pop our return address into DPH, DPL
+00002$:	pop	dph
+	pop	dpl
+	
+	;; R0 and A contain 0.  This loop will execute 256 times.
+	;; 
+	;; FWIW the first iteration writes direct address 0x00,
+	;; which is the location of r0.  We get lucky, we're 
+	;; writing the correct value (0)
+	
+00003$:	mov	@r0,a
+	djnz	r0,00003$
+
+	push	dpl		; restore our return address
+	push	dph
+
+	mov	dpl,#0		; indicate that data init is still required
+	ret
diff --git a/firmware/fx2/common/_startup.a51.brittle b/firmware/fx2/common/_startup.a51.brittle
new file mode 100644
index 000000000..2996275cf
--- /dev/null
+++ b/firmware/fx2/common/_startup.a51.brittle
@@ -0,0 +1,78 @@
+;;; -*- asm -*-
+;;;
+;;; Copyright 2003 Free Software Foundation, Inc.
+;;; 
+;;; This file is part of GNU Radio
+;;; 
+;;; GNU Radio is free software; you can redistribute it and/or modify
+;;; it under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3, or (at your option)
+;;; any later version.
+;;; 
+;;; GNU Radio is distributed in the hope that it will be useful,
+;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;; 
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Radio; see the file COPYING.  If not, write to
+;;; the Free Software Foundation, Inc., 51 Franklin Street,
+;;; Boston, MA 02110-1301, USA.
+
+    
+;;; The default external memory initialization provided by sdcc is not
+;;; appropriate to the FX2.  This is derived from the sdcc code, but uses 
+;;; the FX2 specific _MPAGE sfr.
+
+
+	.area XISEG   (XDATA)	; the initialized external data area
+	.area XINIT   (CODE)	; the code space consts to init XISEG
+	.area XSEG    (XDATA)	; zero initialized xdata
+	.area USBDESCSEG (XDATA); usb descriptors
+
+	
+	;; BIG TIME KLUDGE!
+	;; Look at usrp_main.rst and count the bytes from our
+	;; "normal return location" to the first instruction following
+	;; the comment:	"_mcs51_getRAMCLEAR () start"
+	
+	INSTRUCTION_BYTES_TO_SKIP = 0x29	 ; valid for sdcc 2.4.0 
+	
+
+	.area CSEG    (CODE)
+
+	;; sfr that sets upper address byte of MOVX using @r0 or @r1
+	_MPAGE	=	0x0092
+
+__sdcc_external_startup::
+;	_mcs51_genXINIT() start
+	mov	r1,#l_XINIT
+	mov	a,r1
+	orl	a,#(l_XINIT >> 8)
+	jz	00003$
+	mov	r2,#((l_XINIT+255) >> 8)
+	mov	dptr,#s_XINIT
+	mov	r0,#s_XISEG
+	mov	_MPAGE,#(s_XISEG >> 8)
+00001$:	clr	a
+	movc	a,@a+dptr
+	movx	@r0,a
+	inc	dptr
+	inc	r0
+	cjne	r0,#0,00002$
+	inc	_MPAGE
+00002$:	djnz	r1,00001$
+	djnz	r2,00001$
+	mov	_MPAGE,#0xFF
+00003$:
+
+	;; Danger! Total KLUDGE!
+	;; We pop the return address, add a magic number to it
+	;; then jump to that address.  Believe it or not, this
+	;; looks like the least kludgy way to handle this,
+	;; short of patching the compiler...
+
+	pop	dph
+	pop	dpl
+	mov	a,#INSTRUCTION_BYTES_TO_SKIP
+	jmp	@a+dptr
diff --git a/firmware/fx2/common/delay.c b/firmware/fx2/common/delay.c
new file mode 100644
index 000000000..13cf0eec8
--- /dev/null
+++ b/firmware/fx2/common/delay.c
@@ -0,0 +1,76 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+/*
+ * Delay approximately 1 microsecond (including overhead in udelay).
+ */
+static void
+udelay1 (void) _naked
+{
+  _asm				; lcall that got us here took 4 bus cycles
+	ret			; 4 bus cycles
+  _endasm;
+}
+
+/*
+ * delay for approximately usecs microseconds
+ */
+void
+udelay (unsigned char usecs)
+{
+  do {
+    udelay1 ();
+  } while (--usecs != 0);
+}
+
+
+/*
+ * Delay approximately 1 millisecond.
+ * We're running at 48 MHz, so we need 48,000 clock cycles.
+ *
+ * Note however, that each bus cycle takes 4 clock cycles (not obvious,
+ * but explains the factor of 4 problem below).
+ */
+static void
+mdelay1 (void) _naked
+{
+  _asm
+	mov	dptr,#(-1200 & 0xffff)
+002$:	
+	inc	dptr		; 3 bus cycles
+	mov	a, dpl		; 2 bus cycles
+	orl	a, dph		; 2 bus cycles
+	jnz	002$		; 3 bus cycles
+
+	ret
+  _endasm;
+}
+
+void
+mdelay (unsigned int msecs)
+{
+  do {
+    mdelay1 ();
+  } while (--msecs != 0);
+}
+
+	
diff --git a/firmware/fx2/common/delay.h b/firmware/fx2/common/delay.h
new file mode 100644
index 000000000..f5df779e1
--- /dev/null
+++ b/firmware/fx2/common/delay.h
@@ -0,0 +1,38 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _DELAY_H_
+#define _DELAY_H_
+
+/*
+ * delay for approximately usecs microseconds
+ * Note limit of 255 usecs.
+ */
+void udelay (unsigned char usecs);
+
+/*
+ * delay for approximately msecs milliseconds
+ */
+void mdelay (unsigned short msecs);
+
+
+#endif /* _DELAY_H_ */
diff --git a/firmware/fx2/common/eeprom_boot.a51 b/firmware/fx2/common/eeprom_boot.a51
new file mode 100644
index 000000000..65e452668
--- /dev/null
+++ b/firmware/fx2/common/eeprom_boot.a51
@@ -0,0 +1,573 @@
+;--------------------------------------------------------
+; Hand tweaked minimal eeprom boot code
+;--------------------------------------------------------
+	.module eeprom_boot
+	.optsdcc -mmcs51 --model-small
+	
+;--------------------------------------------------------
+; Public variables in this module
+;--------------------------------------------------------
+	.globl _eeprom_init
+	.globl _EP8FIFOBUF
+	.globl _EP6FIFOBUF
+	.globl _EP4FIFOBUF
+	.globl _EP2FIFOBUF
+	.globl _EP1INBUF
+	.globl _EP1OUTBUF
+	.globl _EP0BUF
+	.globl _CT4
+	.globl _CT3
+	.globl _CT2
+	.globl _CT1
+	.globl _USBTEST
+	.globl _TESTCFG
+	.globl _DBUG
+	.globl _UDMACRCQUAL
+	.globl _UDMACRCL
+	.globl _UDMACRCH
+	.globl _GPIFHOLDAMOUNT
+	.globl _FLOWSTBHPERIOD
+	.globl _FLOWSTBEDGE
+	.globl _FLOWSTB
+	.globl _FLOWHOLDOFF
+	.globl _FLOWEQ1CTL
+	.globl _FLOWEQ0CTL
+	.globl _FLOWLOGIC
+	.globl _FLOWSTATE
+	.globl _GPIFABORT
+	.globl _GPIFREADYSTAT
+	.globl _GPIFREADYCFG
+	.globl _XGPIFSGLDATLNOX
+	.globl _XGPIFSGLDATLX
+	.globl _XGPIFSGLDATH
+	.globl _EP8GPIFTRIG
+	.globl _EP8GPIFPFSTOP
+	.globl _EP8GPIFFLGSEL
+	.globl _EP6GPIFTRIG
+	.globl _EP6GPIFPFSTOP
+	.globl _EP6GPIFFLGSEL
+	.globl _EP4GPIFTRIG
+	.globl _EP4GPIFPFSTOP
+	.globl _EP4GPIFFLGSEL
+	.globl _EP2GPIFTRIG
+	.globl _EP2GPIFPFSTOP
+	.globl _EP2GPIFFLGSEL
+	.globl _GPIFTCB0
+	.globl _GPIFTCB1
+	.globl _GPIFTCB2
+	.globl _GPIFTCB3
+	.globl _GPIFADRL
+	.globl _GPIFADRH
+	.globl _GPIFCTLCFG
+	.globl _GPIFIDLECTL
+	.globl _GPIFIDLECS
+	.globl _GPIFWFSELECT
+	.globl _SETUPDAT
+	.globl _SUDPTRCTL
+	.globl _SUDPTRL
+	.globl _SUDPTRH
+	.globl _EP8FIFOBCL
+	.globl _EP8FIFOBCH
+	.globl _EP6FIFOBCL
+	.globl _EP6FIFOBCH
+	.globl _EP4FIFOBCL
+	.globl _EP4FIFOBCH
+	.globl _EP2FIFOBCL
+	.globl _EP2FIFOBCH
+	.globl _EP8FIFOFLGS
+	.globl _EP6FIFOFLGS
+	.globl _EP4FIFOFLGS
+	.globl _EP2FIFOFLGS
+	.globl _EP8CS
+	.globl _EP6CS
+	.globl _EP4CS
+	.globl _EP2CS
+	.globl _EP1INCS
+	.globl _EP1OUTCS
+	.globl _EP0CS
+	.globl _EP8BCL
+	.globl _EP8BCH
+	.globl _EP6BCL
+	.globl _EP6BCH
+	.globl _EP4BCL
+	.globl _EP4BCH
+	.globl _EP2BCL
+	.globl _EP2BCH
+	.globl _EP1INBC
+	.globl _EP1OUTBC
+	.globl _EP0BCL
+	.globl _EP0BCH
+	.globl _FNADDR
+	.globl _MICROFRAME
+	.globl _USBFRAMEL
+	.globl _USBFRAMEH
+	.globl _TOGCTL
+	.globl _WAKEUPCS
+	.globl _SUSPEND
+	.globl _USBCS
+	.globl _XAUTODAT2
+	.globl _XAUTODAT1
+	.globl _I2CTL
+	.globl _I2DAT
+	.globl _I2CS
+	.globl _PORTECFG
+	.globl _PORTCCFG
+	.globl _PORTACFG
+	.globl _INTSETUP
+	.globl _INT4IVEC
+	.globl _INT2IVEC
+	.globl _CLRERRCNT
+	.globl _ERRCNTLIM
+	.globl _USBERRIRQ
+	.globl _USBERRIE
+	.globl _GPIFIRQ
+	.globl _GPIFIE
+	.globl _EPIRQ
+	.globl _EPIE
+	.globl _USBIRQ
+	.globl _USBIE
+	.globl _NAKIRQ
+	.globl _NAKIE
+	.globl _IBNIRQ
+	.globl _IBNIE
+	.globl _EP8FIFOIRQ
+	.globl _EP8FIFOIE
+	.globl _EP6FIFOIRQ
+	.globl _EP6FIFOIE
+	.globl _EP4FIFOIRQ
+	.globl _EP4FIFOIE
+	.globl _EP2FIFOIRQ
+	.globl _EP2FIFOIE
+	.globl _OUTPKTEND
+	.globl _INPKTEND
+	.globl _EP8ISOINPKTS
+	.globl _EP6ISOINPKTS
+	.globl _EP4ISOINPKTS
+	.globl _EP2ISOINPKTS
+	.globl _EP8FIFOPFL
+	.globl _EP8FIFOPFH
+	.globl _EP6FIFOPFL
+	.globl _EP6FIFOPFH
+	.globl _EP4FIFOPFL
+	.globl _EP4FIFOPFH
+	.globl _EP2FIFOPFL
+	.globl _EP2FIFOPFH
+	.globl _EP8AUTOINLENL
+	.globl _EP8AUTOINLENH
+	.globl _EP6AUTOINLENL
+	.globl _EP6AUTOINLENH
+	.globl _EP4AUTOINLENL
+	.globl _EP4AUTOINLENH
+	.globl _EP2AUTOINLENL
+	.globl _EP2AUTOINLENH
+	.globl _EP8FIFOCFG
+	.globl _EP6FIFOCFG
+	.globl _EP4FIFOCFG
+	.globl _EP2FIFOCFG
+	.globl _EP8CFG
+	.globl _EP6CFG
+	.globl _EP4CFG
+	.globl _EP2CFG
+	.globl _EP1INCFG
+	.globl _EP1OUTCFG
+	.globl _REVCTL
+	.globl _REVID
+	.globl _FIFOPINPOLAR
+	.globl _UART230
+	.globl _BPADDRL
+	.globl _BPADDRH
+	.globl _BREAKPT
+	.globl _FIFORESET
+	.globl _PINFLAGSCD
+	.globl _PINFLAGSAB
+	.globl _IFCONFIG
+	.globl _CPUCS
+	.globl _RES_WAVEDATA_END
+	.globl _GPIF_WAVE_DATA
+;--------------------------------------------------------
+; special function registers
+;--------------------------------------------------------
+_IOA	=	0x0080
+_SP	=	0x0081
+_DPL	=	0x0082
+_DPH	=	0x0083
+_DPL1	=	0x0084
+_DPH1	=	0x0085
+_DPS	=	0x0086
+_PCON	=	0x0087
+_TCON	=	0x0088
+_TMOD	=	0x0089
+_TL0	=	0x008a
+_TL1	=	0x008b
+_TH0	=	0x008c
+_TH1	=	0x008d
+_CKCON	=	0x008e
+_IOB	=	0x0090
+_EXIF	=	0x0091
+_MPAGE	=	0x0092
+_SCON0	=	0x0098
+_SBUF0	=	0x0099
+_APTR1H	=	0x009a
+_APTR1L	=	0x009b
+_AUTODAT1	=	0x009c
+_AUTOPTRH2	=	0x009d
+_AUTOPTRL2	=	0x009e
+_AUTODAT2	=	0x009f
+_IOC	=	0x00a0
+_INT2CLR	=	0x00a1
+_INT4CLR	=	0x00a2
+_IE	=	0x00a8
+_EP2468STAT	=	0x00aa
+_EP24FIFOFLGS	=	0x00ab
+_EP68FIFOFLGS	=	0x00ac
+_AUTOPTRSETUP	=	0x00af
+_IOD	=	0x00b0
+_IOE	=	0x00b1
+_OEA	=	0x00b2
+_OEB	=	0x00b3
+_OEC	=	0x00b4
+_OED	=	0x00b5
+_OEE	=	0x00b6
+_IP	=	0x00b8
+_EP01STAT	=	0x00ba
+_GPIFTRIG	=	0x00bb
+_GPIFSGLDATH	=	0x00bd
+_GPIFSGLDATLX	=	0x00be
+_GPIFSGLDATLNOX	=	0x00bf
+_SCON1	=	0x00c0
+_SBUF1	=	0x00c1
+_T2CON	=	0x00c8
+_RCAP2L	=	0x00ca
+_RCAP2H	=	0x00cb
+_TL2	=	0x00cc
+_TH2	=	0x00cd
+_PSW	=	0x00d0
+_EICON	=	0x00d8
+_ACC	=	0x00e0
+_EIE	=	0x00e8
+_B	=	0x00f0
+_EIP	=	0x00f8
+;--------------------------------------------------------
+; special function bits 
+;--------------------------------------------------------
+_SEL	=	0x0086
+_IT0	=	0x0088
+_IE0	=	0x0089
+_IT1	=	0x008a
+_IE1	=	0x008b
+_TR0	=	0x008c
+_TF0	=	0x008d
+_TR1	=	0x008e
+_TF1	=	0x008f
+_RI	=	0x0098
+_TI	=	0x0099
+_RB8	=	0x009a
+_TB8	=	0x009b
+_REN	=	0x009c
+_SM2	=	0x009d
+_SM1	=	0x009e
+_SM0	=	0x009f
+_EX0	=	0x00a8
+_ET0	=	0x00a9
+_EX1	=	0x00aa
+_ET1	=	0x00ab
+_ES0	=	0x00ac
+_ET2	=	0x00ad
+_ES1	=	0x00ae
+_EA	=	0x00af
+_PX0	=	0x00b8
+_PT0	=	0x00b9
+_PX1	=	0x00ba
+_PT1	=	0x00bb
+_PS0	=	0x00bc
+_PT2	=	0x00bd
+_PS1	=	0x00be
+_RI1	=	0x00c0
+_TI1	=	0x00c1
+_RB81	=	0x00c2
+_TB81	=	0x00c3
+_REN1	=	0x00c4
+_SM21	=	0x00c5
+_SM11	=	0x00c6
+_SM01	=	0x00c7
+_CP_RL2	=	0x00c8
+_C_T2	=	0x00c9
+_TR2	=	0x00ca
+_EXEN2	=	0x00cb
+_TCLK	=	0x00cc
+_RCLK	=	0x00cd
+_EXF2	=	0x00ce
+_TF2	=	0x00cf
+_P	=	0x00d0
+_FL	=	0x00d1
+_OV	=	0x00d2
+_RS0	=	0x00d3
+_RS1	=	0x00d4
+_F0	=	0x00d5
+_AC	=	0x00d6
+_CY	=	0x00d7
+_INT6	=	0x00db
+_RESI	=	0x00dc
+_ERESI	=	0x00dd
+_SMOD1	=	0x00df
+_EIUSB	=	0x00e8
+_EI2C	=	0x00e9
+_EIEX4	=	0x00ea
+_EIEX5	=	0x00eb
+_EIEX6	=	0x00ec
+_PUSB	=	0x00f8
+_PI2C	=	0x00f9
+_EIPX4	=	0x00fa
+_EIPX5	=	0x00fb
+_EIPX6	=	0x00fc
+_bitS_CLK	=	0x0080
+_bitS_OUT	=	0x0081
+_bitS_IN	=	0x0082
+_bitALTERA_DATA0	=	0x00a1
+_bitALTERA_DCLK	=	0x00a3
+;--------------------------------------------------------
+; overlayable register banks 
+;--------------------------------------------------------
+	.area REG_BANK_0	(REL,OVR,DATA)
+	.ds 8
+;--------------------------------------------------------
+; internal ram data
+;--------------------------------------------------------
+	.area DSEG    (DATA)
+;--------------------------------------------------------
+; overlayable items in internal ram 
+;--------------------------------------------------------
+	.area OSEG    (OVR,DATA)
+;--------------------------------------------------------
+; Stack segment in internal ram 
+;--------------------------------------------------------
+	.area	SSEG	(DATA)
+__start__stack:
+	.ds	1
+
+;--------------------------------------------------------
+; indirectly addressable internal ram data
+;--------------------------------------------------------
+	.area ISEG    (DATA)
+;--------------------------------------------------------
+; bit data
+;--------------------------------------------------------
+	.area BSEG    (BIT)
+;--------------------------------------------------------
+; external ram data
+;--------------------------------------------------------
+	.area XSEG    (XDATA)
+_GPIF_WAVE_DATA	=	0xe400
+_RES_WAVEDATA_END	=	0xe480
+_CPUCS	=	0xe600
+_IFCONFIG	=	0xe601
+_PINFLAGSAB	=	0xe602
+_PINFLAGSCD	=	0xe603
+_FIFORESET	=	0xe604
+_BREAKPT	=	0xe605
+_BPADDRH	=	0xe606
+_BPADDRL	=	0xe607
+_UART230	=	0xe608
+_FIFOPINPOLAR	=	0xe609
+_REVID	=	0xe60a
+_REVCTL	=	0xe60b
+_EP1OUTCFG	=	0xe610
+_EP1INCFG	=	0xe611
+_EP2CFG	=	0xe612
+_EP4CFG	=	0xe613
+_EP6CFG	=	0xe614
+_EP8CFG	=	0xe615
+_EP2FIFOCFG	=	0xe618
+_EP4FIFOCFG	=	0xe619
+_EP6FIFOCFG	=	0xe61a
+_EP8FIFOCFG	=	0xe61b
+_EP2AUTOINLENH	=	0xe620
+_EP2AUTOINLENL	=	0xe621
+_EP4AUTOINLENH	=	0xe622
+_EP4AUTOINLENL	=	0xe623
+_EP6AUTOINLENH	=	0xe624
+_EP6AUTOINLENL	=	0xe625
+_EP8AUTOINLENH	=	0xe626
+_EP8AUTOINLENL	=	0xe627
+_EP2FIFOPFH	=	0xe630
+_EP2FIFOPFL	=	0xe631
+_EP4FIFOPFH	=	0xe632
+_EP4FIFOPFL	=	0xe633
+_EP6FIFOPFH	=	0xe634
+_EP6FIFOPFL	=	0xe635
+_EP8FIFOPFH	=	0xe636
+_EP8FIFOPFL	=	0xe637
+_EP2ISOINPKTS	=	0xe640
+_EP4ISOINPKTS	=	0xe641
+_EP6ISOINPKTS	=	0xe642
+_EP8ISOINPKTS	=	0xe643
+_INPKTEND	=	0xe648
+_OUTPKTEND	=	0xe649
+_EP2FIFOIE	=	0xe650
+_EP2FIFOIRQ	=	0xe651
+_EP4FIFOIE	=	0xe652
+_EP4FIFOIRQ	=	0xe653
+_EP6FIFOIE	=	0xe654
+_EP6FIFOIRQ	=	0xe655
+_EP8FIFOIE	=	0xe656
+_EP8FIFOIRQ	=	0xe657
+_IBNIE	=	0xe658
+_IBNIRQ	=	0xe659
+_NAKIE	=	0xe65a
+_NAKIRQ	=	0xe65b
+_USBIE	=	0xe65c
+_USBIRQ	=	0xe65d
+_EPIE	=	0xe65e
+_EPIRQ	=	0xe65f
+_GPIFIE	=	0xe660
+_GPIFIRQ	=	0xe661
+_USBERRIE	=	0xe662
+_USBERRIRQ	=	0xe663
+_ERRCNTLIM	=	0xe664
+_CLRERRCNT	=	0xe665
+_INT2IVEC	=	0xe666
+_INT4IVEC	=	0xe667
+_INTSETUP	=	0xe668
+_PORTACFG	=	0xe670
+_PORTCCFG	=	0xe671
+_PORTECFG	=	0xe672
+_I2CS	=	0xe678
+_I2DAT	=	0xe679
+_I2CTL	=	0xe67a
+_XAUTODAT1	=	0xe67b
+_XAUTODAT2	=	0xe67c
+_USBCS	=	0xe680
+_SUSPEND	=	0xe681
+_WAKEUPCS	=	0xe682
+_TOGCTL	=	0xe683
+_USBFRAMEH	=	0xe684
+_USBFRAMEL	=	0xe685
+_MICROFRAME	=	0xe686
+_FNADDR	=	0xe687
+_EP0BCH	=	0xe68a
+_EP0BCL	=	0xe68b
+_EP1OUTBC	=	0xe68d
+_EP1INBC	=	0xe68f
+_EP2BCH	=	0xe690
+_EP2BCL	=	0xe691
+_EP4BCH	=	0xe694
+_EP4BCL	=	0xe695
+_EP6BCH	=	0xe698
+_EP6BCL	=	0xe699
+_EP8BCH	=	0xe69c
+_EP8BCL	=	0xe69d
+_EP0CS	=	0xe6a0
+_EP1OUTCS	=	0xe6a1
+_EP1INCS	=	0xe6a2
+_EP2CS	=	0xe6a3
+_EP4CS	=	0xe6a4
+_EP6CS	=	0xe6a5
+_EP8CS	=	0xe6a6
+_EP2FIFOFLGS	=	0xe6a7
+_EP4FIFOFLGS	=	0xe6a8
+_EP6FIFOFLGS	=	0xe6a9
+_EP8FIFOFLGS	=	0xe6aa
+_EP2FIFOBCH	=	0xe6ab
+_EP2FIFOBCL	=	0xe6ac
+_EP4FIFOBCH	=	0xe6ad
+_EP4FIFOBCL	=	0xe6ae
+_EP6FIFOBCH	=	0xe6af
+_EP6FIFOBCL	=	0xe6b0
+_EP8FIFOBCH	=	0xe6b1
+_EP8FIFOBCL	=	0xe6b2
+_SUDPTRH	=	0xe6b3
+_SUDPTRL	=	0xe6b4
+_SUDPTRCTL	=	0xe6b5
+_SETUPDAT	=	0xe6b8
+_GPIFWFSELECT	=	0xe6c0
+_GPIFIDLECS	=	0xe6c1
+_GPIFIDLECTL	=	0xe6c2
+_GPIFCTLCFG	=	0xe6c3
+_GPIFADRH	=	0xe6c4
+_GPIFADRL	=	0xe6c5
+_GPIFTCB3	=	0xe6ce
+_GPIFTCB2	=	0xe6cf
+_GPIFTCB1	=	0xe6d0
+_GPIFTCB0	=	0xe6d1
+_EP2GPIFFLGSEL	=	0xe6d2
+_EP2GPIFPFSTOP	=	0xe6d3
+_EP2GPIFTRIG	=	0xe6d4
+_EP4GPIFFLGSEL	=	0xe6da
+_EP4GPIFPFSTOP	=	0xe6db
+_EP4GPIFTRIG	=	0xe6dc
+_EP6GPIFFLGSEL	=	0xe6e2
+_EP6GPIFPFSTOP	=	0xe6e3
+_EP6GPIFTRIG	=	0xe6e4
+_EP8GPIFFLGSEL	=	0xe6ea
+_EP8GPIFPFSTOP	=	0xe6eb
+_EP8GPIFTRIG	=	0xe6ec
+_XGPIFSGLDATH	=	0xe6f0
+_XGPIFSGLDATLX	=	0xe6f1
+_XGPIFSGLDATLNOX	=	0xe6f2
+_GPIFREADYCFG	=	0xe6f3
+_GPIFREADYSTAT	=	0xe6f4
+_GPIFABORT	=	0xe6f5
+_FLOWSTATE	=	0xe6c6
+_FLOWLOGIC	=	0xe6c7
+_FLOWEQ0CTL	=	0xe6c8
+_FLOWEQ1CTL	=	0xe6c9
+_FLOWHOLDOFF	=	0xe6ca
+_FLOWSTB	=	0xe6cb
+_FLOWSTBEDGE	=	0xe6cc
+_FLOWSTBHPERIOD	=	0xe6cd
+_GPIFHOLDAMOUNT	=	0xe60c
+_UDMACRCH	=	0xe67d
+_UDMACRCL	=	0xe67e
+_UDMACRCQUAL	=	0xe67f
+_DBUG	=	0xe6f8
+_TESTCFG	=	0xe6f9
+_USBTEST	=	0xe6fa
+_CT1	=	0xe6fb
+_CT2	=	0xe6fc
+_CT3	=	0xe6fd
+_CT4	=	0xe6fe
+_EP0BUF	=	0xe740
+_EP1OUTBUF	=	0xe780
+_EP1INBUF	=	0xe7c0
+_EP2FIFOBUF	=	0xf000
+_EP4FIFOBUF	=	0xf400
+_EP6FIFOBUF	=	0xf800
+_EP8FIFOBUF	=	0xfc00
+;--------------------------------------------------------
+; external initialized ram data
+;--------------------------------------------------------
+;--------------------------------------------------------
+; interrupt vector 
+;--------------------------------------------------------
+	.area CSEG    (CODE)
+__interrupt_vect:
+	ljmp	__sdcc_gsinit_startup
+;--------------------------------------------------------
+; global & static initialisations
+;--------------------------------------------------------
+	.area GSINIT  (CODE)
+	.area GSFINAL (CODE)
+	.area GSINIT  (CODE)
+__sdcc_gsinit_startup:
+	mov	sp,#__start__stack - 1
+	lcall	__sdcc_external_startup
+	mov	a,dpl
+	jz	__sdcc_init_data
+	ljmp	__sdcc_program_startup
+__sdcc_init_data:
+	.area GSFINAL (CODE)
+	ljmp	__sdcc_program_startup
+;--------------------------------------------------------
+; Home
+;--------------------------------------------------------
+	.area HOME    (CODE)
+	.area CSEG    (CODE)
+;--------------------------------------------------------
+; code
+;--------------------------------------------------------
+	.area CSEG    (CODE)
+__sdcc_program_startup:
+	lcall	_eeprom_init
+;	return from _eeprom_init will spin here
+	sjmp .
+	.area CSEG    (CODE)
diff --git a/firmware/fx2/common/eeprom_init.c b/firmware/fx2/common/eeprom_init.c
new file mode 100644
index 000000000..07902dcca
--- /dev/null
+++ b/firmware/fx2/common/eeprom_init.c
@@ -0,0 +1,75 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "usrp_common.h"
+#include "usrp_commands.h"
+
+/*
+ * the host side fpga loader code pushes an MD5 hash of the bitstream
+ * into hash1.
+ */
+#define	  USRP_HASH_SIZE      16
+xdata at USRP_HASH_SLOT_0_ADDR unsigned char hash0[USRP_HASH_SIZE];
+
+
+#define REG_RX_PWR_DN		 1
+#define	REG_TX_PWR_DN		 8
+#define	REG_TX_MODULATOR	20
+
+void eeprom_init (void)
+{
+  unsigned short counter;
+  unsigned char	 i;
+
+  // configure IO ports (B and D are used by GPIF)
+
+  IOA = bmPORT_A_INITIAL;	// Port A initial state
+  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
+
+  IOC = bmPORT_C_INITIAL;	// Port C initial state
+  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
+
+  IOE = bmPORT_E_INITIAL;	// Port E initial state
+  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
+
+  EP0BCH = 0;			SYNCDELAY;
+
+  // USBCS &= ~bmRENUM;		// chip firmware handles commands
+  USBCS = 0;			// chip firmware handles commands
+
+  //USRP_PC &= ~bmPC_nRESET;	// active low reset
+  //USRP_PC |=  bmPC_nRESET;
+
+  // zero firmware hash slot
+  i = 0;
+  do {
+    hash0[i] = 0;
+    i++;
+  } while (i != USRP_HASH_SIZE);
+
+  counter = 0;
+  while (1){
+    counter++;
+    if (counter & 0x8000)
+      IOC ^= bmPC_LED0;
+  }
+}
diff --git a/firmware/fx2/common/fpga.h b/firmware/fx2/common/fpga.h
new file mode 100644
index 000000000..6cd5de8e2
--- /dev/null
+++ b/firmware/fx2/common/fpga.h
@@ -0,0 +1,31 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef INCLUDED_FPGA_H
+#define INCLUDED_FPGA_H
+
+#include "fpga_load.h"
+
+#if defined(HAVE_USRP2)
+#include "fpga_rev2.h"
+#endif
+
+#endif /* INCLUDED_FPGA_H */
diff --git a/firmware/fx2/common/fpga_load.h b/firmware/fx2/common/fpga_load.h
new file mode 100644
index 000000000..7c36a04c8
--- /dev/null
+++ b/firmware/fx2/common/fpga_load.h
@@ -0,0 +1,28 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#ifndef INCLUDED_FPGA_LOAD_H
+#define INCLUDED_FPGA_LOAD_H
+
+unsigned char fpga_load_begin (void);
+unsigned char fpga_load_xfer (xdata unsigned char *p, unsigned char len);
+unsigned char fpga_load_end (void);
+
+#endif /* INCLUDED_FPGA_LOAD_H */
diff --git a/firmware/fx2/common/fpga_regs0.h b/firmware/fx2/common/fpga_regs0.h
new file mode 100644
index 000000000..883798301
--- /dev/null
+++ b/firmware/fx2/common/fpga_regs0.h
@@ -0,0 +1,42 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _FPGA_REGS0_H_
+#define _FPGA_REGS0_H_
+
+#define FR_RX_FREQ_0	   0
+#define FR_RX_FREQ_1	   1
+#define FR_RX_FREQ_2	   2
+#define FR_RX_FREQ_3	   3
+#define FR_TX_FREQ_0	   4
+#define FR_TX_FREQ_1	   5
+#define FR_TX_FREQ_2	   6
+#define FR_TX_FREQ_3	   7
+#define FR_COMBO	   8
+
+
+#define FR_ADC_CLK_DIV   128	// pseudo regs mapped to FR_COMBO by f/w
+#define FR_EXT_CLK_DIV	 129	
+#define FR_INTERP	 130
+#define FR_DECIM	 131
+
+#endif
diff --git a/firmware/fx2/common/fpga_regs_common.h b/firmware/fx2/common/fpga_regs_common.h
new file mode 100644
index 000000000..b4a496af7
--- /dev/null
+++ b/firmware/fx2/common/fpga_regs_common.h
@@ -0,0 +1,150 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003,2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.	If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef INCLUDED_FPGA_REGS_COMMON_H
+#define INCLUDED_FPGA_REGS_COMMON_H
+
+// This file defines registers common to all FPGA configurations.
+// Registers 0 to 31 are reserved for use in this file.
+
+
+// The FPGA needs to know the rate that samples are coming from and
+// going to the A/D's and D/A's.  div = 128e6 / sample_rate
+
+#define	FR_TX_SAMPLE_RATE_DIV	 0
+#define	FR_RX_SAMPLE_RATE_DIV	 1
+
+// 2 and 3 are defined in the ATR section
+
+#define	FR_MASTER_CTRL		 4	// master enable and reset controls
+#  define  bmFR_MC_ENABLE_TX		(1 << 0)
+#  define  bmFR_MC_ENABLE_RX		(1 << 1)
+#  define  bmFR_MC_RESET_TX		(1 << 2)
+#  define  bmFR_MC_RESET_RX		(1 << 3)
+
+// i/o direction registers for pins that go to daughterboards.
+// Setting the bit makes it an output from the FPGA to the d'board.
+// top 16 is mask, low 16 is value
+
+#define	FR_OE_0			 5	// slot 0
+#define	FR_OE_1			 6
+#define	FR_OE_2			 7
+#define	FR_OE_3			 8
+
+// i/o registers for pins that go to daughterboards.
+// top 16 is a mask, low 16 is value
+
+#define	FR_IO_0			 9	// slot 0
+#define	FR_IO_1			10
+#define	FR_IO_2			11
+#define	FR_IO_3			12
+
+#define	FR_MODE			13
+#  define  bmFR_MODE_NORMAL		      0
+#  define  bmFR_MODE_LOOPBACK		(1 << 0)	// enable digital loopback
+#  define  bmFR_MODE_RX_COUNTING	(1 << 1)	// Rx is counting
+#  define  bmFR_MODE_RX_COUNTING_32BIT	(1 << 2)	// Rx is counting with a 32 bit counter
+                                                    // low and high 16 bits are multiplexed across channel I and Q
+
+
+// If the corresponding bit is set, internal FPGA debug circuitry
+// controls the i/o pins for the associated bank of daughterboard
+// i/o pins.  Typically used for debugging FPGA designs.
+
+#define FR_DEBUG_EN             14
+#  define bmFR_DEBUG_EN_TX_A           (1 << 0)        // debug controls TX_A i/o
+#  define bmFR_DEBUG_EN_RX_A           (1 << 1)        // debug controls RX_A i/o
+#  define bmFR_DEBUG_EN_TX_B           (1 << 2)        // debug controls TX_B i/o
+#  define bmFR_DEBUG_EN_RX_B           (1 << 3)        // debug controls RX_B i/o
+
+
+// If the corresponding bit is set, enable the automatic DC
+// offset correction control loop.
+//
+// The 4 low bits are significant:
+//
+//   ADC0 = (1 << 0)
+//   ADC1 = (1 << 1)
+//   ADC2 = (1 << 2)
+//   ADC3 = (1 << 3)
+//
+// This control loop works if the attached daugherboard blocks DC.
+// Currently all daughterboards do block DC.  This includes:
+// basic rx, dbs_rx, tv_rx, flex_xxx_rx.
+
+#define FR_DC_OFFSET_CL_EN	15			// DC Offset Control Loop Enable
+
+
+// offset corrections for ADC's and DAC's (2's complement)
+
+#define	FR_ADC_OFFSET_0	 	16
+#define	FR_ADC_OFFSET_1		17
+#define	FR_ADC_OFFSET_2	 	18
+#define	FR_ADC_OFFSET_3		19
+
+
+// ------------------------------------------------------------------------
+// Automatic Transmit/Receive switching
+//
+// If automatic transmit/receive (ATR) switching is enabled in the
+// FR_ATR_CTL register, the presence or absence of data in the FPGA
+// transmit fifo selects between two sets of values for each of the 4
+// banks of daughterboard i/o pins.
+//
+// Each daughterboard slot has 3 16-bit registers associated with it:
+//   FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
+//
+// FR_ATR_MASK_{0,1,2,3}: 
+//
+//   These registers determine which of the daugherboard i/o pins are
+//   affected by ATR switching.  If a bit in the mask is set, the
+//   corresponding i/o bit is controlled by ATR, else it's output
+//   value comes from the normal i/o pin output register:
+//   FR_IO_{0,1,2,3}.
+//
+// FR_ATR_TXVAL_{0,1,2,3}:
+// FR_ATR_RXVAL_{0,1,2,3}:
+//
+//   If the Tx fifo contains data, then the bits from TXVAL that are
+//   selected by MASK are output.  Otherwise, the bits from RXVAL that
+//   are selected by MASK are output.
+                      
+#define FR_ATR_MASK_0		20	// slot 0
+#define	FR_ATR_TXVAL_0		21
+#define FR_ATR_RXVAL_0		22
+
+#define FR_ATR_MASK_1		23	// slot 1
+#define	FR_ATR_TXVAL_1		24
+#define FR_ATR_RXVAL_1		25
+
+#define FR_ATR_MASK_2		26	// slot 2
+#define	FR_ATR_TXVAL_2		27
+#define FR_ATR_RXVAL_2		28
+
+#define FR_ATR_MASK_3		29	// slot 3
+#define	FR_ATR_TXVAL_3		30
+#define FR_ATR_RXVAL_3		31
+
+// Clock ticks to delay rising and falling edge of T/R signal
+#define FR_ATR_TX_DELAY          2
+#define FR_ATR_RX_DELAY          3
+
+#endif /* INCLUDED_FPGA_REGS_COMMON_H */
diff --git a/firmware/fx2/common/fpga_regs_common.v b/firmware/fx2/common/fpga_regs_common.v
new file mode 100644
index 000000000..8035d8565
--- /dev/null
+++ b/firmware/fx2/common/fpga_regs_common.v
@@ -0,0 +1,117 @@
+//
+// This file is machine generated from ./fpga_regs_common.h
+// Do not edit by hand; your edits will be overwritten.
+//
+
+// This file defines registers common to all FPGA configurations.
+// Registers 0 to 31 are reserved for use in this file.
+
+
+// The FPGA needs to know the rate that samples are coming from and
+// going to the A/D's and D/A's.  div = 128e6 / sample_rate
+
+`define FR_TX_SAMPLE_RATE_DIV     7'd0
+`define FR_RX_SAMPLE_RATE_DIV     7'd1
+
+// 2 and 3 are defined in the ATR section
+
+`define FR_MASTER_CTRL            7'd4	// master enable and reset controls
+
+// i/o direction registers for pins that go to daughterboards.
+// Setting the bit makes it an output from the FPGA to the d'board.
+// top 16 is mask, low 16 is value
+
+`define FR_OE_0                   7'd5	// slot 0
+`define FR_OE_1                   7'd6
+`define FR_OE_2                   7'd7
+`define FR_OE_3                   7'd8
+
+// i/o registers for pins that go to daughterboards.
+// top 16 is a mask, low 16 is value
+
+`define FR_IO_0                   7'd9	// slot 0
+`define FR_IO_1                   7'd10
+`define FR_IO_2                   7'd11
+`define FR_IO_3                   7'd12
+
+`define FR_MODE                   7'd13
+
+
+// If the corresponding bit is set, internal FPGA debug circuitry
+// controls the i/o pins for the associated bank of daughterboard
+// i/o pins.  Typically used for debugging FPGA designs.
+
+`define FR_DEBUG_EN               7'd14
+
+
+// If the corresponding bit is set, enable the automatic DC
+// offset correction control loop.
+//
+// The 4 low bits are significant:
+//
+//   ADC0 = (1 << 0)
+//   ADC1 = (1 << 1)
+//   ADC2 = (1 << 2)
+//   ADC3 = (1 << 3)
+//
+// This control loop works if the attached daugherboard blocks DC.
+// Currently all daughterboards do block DC.  This includes:
+// basic rx, dbs_rx, tv_rx, flex_xxx_rx.
+
+`define FR_DC_OFFSET_CL_EN        7'd15			// DC Offset Control Loop Enable
+
+
+// offset corrections for ADC's and DAC's (2's complement)
+
+`define FR_ADC_OFFSET_0           7'd16
+`define FR_ADC_OFFSET_1           7'd17
+`define FR_ADC_OFFSET_2           7'd18
+`define FR_ADC_OFFSET_3           7'd19
+
+
+// ------------------------------------------------------------------------
+// Automatic Transmit/Receive switching
+//
+// If automatic transmit/receive (ATR) switching is enabled in the
+// FR_ATR_CTL register, the presence or absence of data in the FPGA
+// transmit fifo selects between two sets of values for each of the 4
+// banks of daughterboard i/o pins.
+//
+// Each daughterboard slot has 3 16-bit registers associated with it:
+//   FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
+//
+// FR_ATR_MASK_{0,1,2,3}: 
+//
+//   These registers determine which of the daugherboard i/o pins are
+//   affected by ATR switching.  If a bit in the mask is set, the
+//   corresponding i/o bit is controlled by ATR, else it's output
+//   value comes from the normal i/o pin output register:
+//   FR_IO_{0,1,2,3}.
+//
+// FR_ATR_TXVAL_{0,1,2,3}:
+// FR_ATR_RXVAL_{0,1,2,3}:
+//
+//   If the Tx fifo contains data, then the bits from TXVAL that are
+//   selected by MASK are output.  Otherwise, the bits from RXVAL that
+//   are selected by MASK are output.
+                      
+`define FR_ATR_MASK_0             7'd20	// slot 0
+`define FR_ATR_TXVAL_0            7'd21
+`define FR_ATR_RXVAL_0            7'd22
+
+`define FR_ATR_MASK_1             7'd23	// slot 1
+`define FR_ATR_TXVAL_1            7'd24
+`define FR_ATR_RXVAL_1            7'd25
+
+`define FR_ATR_MASK_2             7'd26	// slot 2
+`define FR_ATR_TXVAL_2            7'd27
+`define FR_ATR_RXVAL_2            7'd28
+
+`define FR_ATR_MASK_3             7'd29	// slot 3
+`define FR_ATR_TXVAL_3            7'd30
+`define FR_ATR_RXVAL_3            7'd31
+
+// Clock ticks to delay rising and falling edge of T/R signal
+`define FR_ATR_TX_DELAY           7'd2
+`define FR_ATR_RX_DELAY           7'd3
+
diff --git a/firmware/fx2/common/fpga_regs_standard.h b/firmware/fx2/common/fpga_regs_standard.h
new file mode 100644
index 000000000..7485e2bab
--- /dev/null
+++ b/firmware/fx2/common/fpga_regs_standard.h
@@ -0,0 +1,300 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003,2004,2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.	If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef INCLUDED_FPGA_REGS_STANDARD_H
+#define INCLUDED_FPGA_REGS_STANDARD_H
+
+// Register numbers 0 to 31 are reserved for use in fpga_regs_common.h.
+// Registers 64 to 79 are available for custom FPGA builds.
+
+
+// DDC / DUC
+
+#define	FR_INTERP_RATE		32	// [1,1024]
+#define	FR_DECIM_RATE		33	// [1,256]
+
+// DDC center freq
+
+#define FR_RX_FREQ_0		34
+#define FR_RX_FREQ_1		35
+#define FR_RX_FREQ_2		36
+#define FR_RX_FREQ_3		37
+
+// See below for DDC Starting Phase
+
+// ------------------------------------------------------------------------
+//  configure FPGA Rx mux
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------+-------+-------+-------+-------+-+-----+
+// |      must be zero     | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH |
+// +-----------------------+-------+-------+-------+-------+-+-----+
+//
+// There are a maximum of 4 digital downconverters in the the FPGA.
+// Each DDC has two 16-bit inputs, I and Q, and two 16-bit outputs, I & Q.
+//
+// DDC I inputs are specified by the two bit fields I3, I2, I1 & I0
+//
+//   0 = DDC input is from ADC 0
+//   1 = DDC input is from ADC 1
+//   2 = DDC input is from ADC 2
+//   3 = DDC input is from ADC 3
+//
+// If Z == 1, all DDC Q inputs are set to zero
+// If Z == 0, DDC Q inputs are specified by the two bit fields Q3, Q2, Q1 & Q0
+//
+// NCH specifies the number of complex channels that are sent across
+// the USB.  The legal values are 1, 2 or 4, corresponding to 2, 4 or
+// 8 16-bit values.
+
+#define	FR_RX_MUX		38
+
+// ------------------------------------------------------------------------
+//  configure FPGA Tx Mux.
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------+-------+-------+-------+-------+-+-----+
+// |                       | DAC3  | DAC2  | DAC1  |  DAC0 |0| NCH |
+// +-----------------------------------------------+-------+-+-----+
+//
+// NCH specifies the number of complex channels that are sent across
+// the USB.  The legal values are 1 or 2, corresponding to 2 or 4
+// 16-bit values.
+//
+// There are two interpolators with complex inputs and outputs.
+// There are four DACs.  (We use the DUC in each AD9862.)
+//
+// Each 4-bit DACx field specifies the source for the DAC and
+// whether or not that DAC is enabled.  Each subfield is coded
+// like this: 
+//
+//    3 2 1 0
+//   +-+-----+
+//   |E|  N  |
+//   +-+-----+
+//
+// Where E is set if the DAC is enabled, and N specifies which
+// interpolator output is connected to this DAC.
+//
+//  N   which interp output
+// ---  -------------------
+//  0   chan 0 I
+//  1   chan 0 Q
+//  2   chan 1 I
+//  3   chan 1 Q
+
+#define	FR_TX_MUX		39
+
+// ------------------------------------------------------------------------
+// REFCLK control
+//
+// Control whether a reference clock is sent to the daughterboards,
+// and what frequency.  The refclk is sent on d'board i/o pin 0.
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------------+-+------------+
+// |             Reserved (Must be zero)           |E|   DIVISOR  |
+// +-----------------------------------------------+-+------------+
+
+//
+// Bit 7  -- 1 turns on refclk, 0 allows IO use
+// Bits 6:0 Divider value
+
+#define FR_TX_A_REFCLK          40
+#define FR_RX_A_REFCLK          41
+#define FR_TX_B_REFCLK          42
+#define FR_RX_B_REFCLK          43
+
+#  define bmFR_REFCLK_EN	   0x80
+#  define bmFR_REFCLK_DIVISOR_MASK 0x7f
+
+// ------------------------------------------------------------------------
+// DDC Starting Phase
+
+#define FR_RX_PHASE_0		44
+#define FR_RX_PHASE_1		45
+#define FR_RX_PHASE_2		46
+#define FR_RX_PHASE_3		47
+
+// ------------------------------------------------------------------------
+// Tx data format control register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-------------------------------------------------------+-------+
+// |                    Reserved (Must be zero)            |  FMT  |
+// +-------------------------------------------------------+-------+
+//
+//  FMT values:
+
+#define FR_TX_FORMAT		48
+#  define bmFR_TX_FORMAT_16_IQ		0	// 16-bit I, 16-bit Q
+
+// ------------------------------------------------------------------------
+// Rx data format control register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------+-+-+---------+-------+
+// |          Reserved (Must be zero)        |B|Q|  WIDTH  | SHIFT |
+// +-----------------------------------------+-+-+---------+-------+
+//
+//  FMT values:
+
+#define FR_RX_FORMAT		49
+
+#  define bmFR_RX_FORMAT_SHIFT_MASK	(0x0f <<  0)	// arithmetic right shift [0, 15]
+#  define bmFR_RX_FORMAT_SHIFT_SHIFT	0
+#  define bmFR_RX_FORMAT_WIDTH_MASK	(0x1f <<  4)    // data width in bits [1, 16] (not all valid)
+#  define bmFR_RX_FORMAT_WIDTH_SHIFT    4
+#  define bmFR_RX_FORMAT_WANT_Q		(0x1  <<  9)    // deliver both I & Q, else just I
+#  define bmFR_RX_FORMAT_BYPASS_HB	(0x1  << 10)    // bypass half-band filter
+
+// The valid combinations currently are:
+//
+//   B  Q  WIDTH  SHIFT
+//   0  1    16     0
+//   0  1     8     8
+
+
+// Possible future values of WIDTH = {4, 2, 1}
+// 12 takes a bit more work, since we need to know packet alignment.
+
+// ------------------------------------------------------------------------
+// FIXME register numbers 50 to 63 are available
+
+// ------------------------------------------------------------------------
+// Registers 64 to 95 are reserved for user custom FPGA builds.
+// The standard USRP software will not touch these.
+
+#define FR_USER_0	64
+#define FR_USER_1	65
+#define FR_USER_2	66
+#define FR_USER_3	67
+#define FR_USER_4	68
+#define FR_USER_5	69
+#define FR_USER_6	70
+#define FR_USER_7	71
+#define FR_USER_8	72
+#define FR_USER_9	73
+#define FR_USER_10	74
+#define FR_USER_11	75
+#define FR_USER_12	76
+#define FR_USER_13	77
+#define FR_USER_14	78
+#define FR_USER_15	79
+#define FR_USER_16	80
+#define FR_USER_17	81
+#define FR_USER_18	82
+#define FR_USER_19	83
+#define FR_USER_20	84
+#define FR_USER_21	85
+#define FR_USER_22	86
+#define FR_USER_23	87
+#define FR_USER_24	88
+#define FR_USER_25	89
+#define FR_USER_26	90
+#define FR_USER_27	91
+#define FR_USER_28	92
+#define FR_USER_29	93
+#define FR_USER_30	94
+#define FR_USER_31	95
+
+//Registers needed for multi usrp master/slave configuration
+//
+//Rx Master/slave control register (FR_RX_MASTER_SLAVE = FR_USER_0)
+//
+#define FR_RX_MASTER_SLAVE		64
+#define bitnoFR_RX_SYNC			0
+#define bitnoFR_RX_SYNC_MASTER		1
+#define bitnoFR_RX_SYNC_SLAVE		2
+#  define bmFR_RX_SYNC          (1 <<bitnoFR_RX_SYNC) //1 If this is a master "sync now" and send sync to slave.
+                                                      //  If this is a slave "sync now" (testing purpose only)
+                                                      //  Sync is allmost the same as reset (clear all counters and buffers) 
+                                                      //  except that the io outputs and settings don't get reset (otherwise it couldn't send the sync to the slave)
+                                                      //0 Normal operation
+
+#  define bmFR_RX_SYNC_MASTER (1 <<bitnoFR_RX_SYNC_MASTER) //1 This is a rx sync master, output sync_rx on rx_a_io[15]
+                                                           //0 This is not a rx sync master
+#  define bmFR_RX_SYNC_SLAVE  (1 <<bitnoFR_RX_SYNC_SLAVE) //1 This is a rx sync slave, follow sync_rx on rx_a_io[bitnoFR_RX_SYNC_INPUT_IOPIN]
+                                                          //0 This is not an rx sync slave.
+
+//Caution The master settings will output values on the io lines.
+//They inheritely enable these lines as output. If you have a daughtercard which uses these lines also as output then you will burn your usrp and daughtercard.
+//If you set the slave bits then your usrp won't do anything if you don't connect a master.
+// Rx Master/slave control register
+//
+// The way this is supposed to be used is connecting a (short) 16pin flatcable from an rx daughterboard in RXA master io_rx[8..15] to slave io_rx[8..15] on RXA of slave usrp
+// This can be done with basic_rx boards or dbsrx boards
+//dbsrx: connect master-J25 to slave-J25
+//basic rx: connect J25 to slave-J25
+//CAUTION: pay attention to the lineup of your connector.
+//The red line (pin1) should be at the same side of the daughterboards on master and slave.
+//If you turnaround the cable on one end you will burn your usrp.
+
+//You cannot use a 16pin flatcable if you are using FLEX400 or FLEX2400 daughterboards, since these use a lot of the io pins.
+//You can still link them but you must use only a 2pin or 1pin cable
+//You can also use a 2-wire link. put a 2pin header on io[15],gnd of the master RXA daughterboard and connect it to io15,gnd of the slave RXA db.
+//You can use a cable like the ones found with the leds on the mainbord of a PC.
+//Make sure you don't twist the cable, otherwise you connect the sync output to ground.
+//To be save you could also just use a single wire from master io[15] to slave io[15], but this is not optimal for signal integrity.
+
+
+// Since rx_io[0] can normally be used as a refclk and is not exported on all daughterboards this line
+// still has the refclk function if you use the master/slave setup (it is not touched by the master/slave settings).
+// The master/slave circuitry will only use io pin 15 and does not touch any of the other io pins.
+#define bitnoFR_RX_SYNC_INPUT_IOPIN		15
+#define bmFR_RX_SYNC_INPUT_IOPIN		(1<<bitnoFR_RX_SYNC_INPUT_IOPIN)
+//TODO the output pin is still hardcoded in the verilog code, make it listen to the following define
+#define bitnoFR_RX_SYNC_OUTPUT_IOPIN	15
+#define bmFR_RX_SYNC_OUTPUT_IOPIN	(1<<bitnoFR_RX_SYNC_OUTPUT_IOPIN)
+// =======================================================================
+// READBACK Registers
+// =======================================================================
+
+#define FR_RB_IO_RX_A_IO_TX_A	1	// read back a-side i/o pins
+#define	FR_RB_IO_RX_B_IO_TX_B	2	// read back b-side i/o pins
+
+// ------------------------------------------------------------------------
+// FPGA Capability register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------------+-+-----+-+-----+
+// |                    Reserved (Must be zero)    |T|NDUC |R|NDDC |
+// +-----------------------------------------------+-+-----+-+-----+
+//
+// Bottom 4-bits are Rx capabilities
+// Next   4-bits are Tx capabilities
+
+#define	FR_RB_CAPS	3
+#  define bmFR_RB_CAPS_NDDC_MASK	(0x7 << 0)   // # of digital down converters 0,1,2,4
+#  define bmFR_RB_CAPS_NDDC_SHIFT	0
+#  define bmFR_RB_CAPS_RX_HAS_HALFBAND	(0x1 << 3)
+#  define bmFR_RB_CAPS_NDUC_MASK        (0x7 << 4)   // # of digital up converters 0,1,2
+#  define bmFR_RB_CAPS_NDUC_SHIFT	4
+#  define bmFR_RB_CAPS_TX_HAS_HALFBAND	(0x1 << 7)
+
+
+#endif /* INCLUDED_FPGA_REGS_STANDARD_H */
diff --git a/firmware/fx2/common/fpga_regs_standard.v b/firmware/fx2/common/fpga_regs_standard.v
new file mode 100644
index 000000000..d09aa6116
--- /dev/null
+++ b/firmware/fx2/common/fpga_regs_standard.v
@@ -0,0 +1,256 @@
+//
+// This file is machine generated from ./fpga_regs_standard.h
+// Do not edit by hand; your edits will be overwritten.
+//
+
+// Register numbers 0 to 31 are reserved for use in fpga_regs_common.h.
+// Registers 64 to 79 are available for custom FPGA builds.
+
+
+// DDC / DUC
+
+`define FR_INTERP_RATE            7'd32	// [1,1024]
+`define FR_DECIM_RATE             7'd33	// [1,256]
+
+// DDC center freq
+
+`define FR_RX_FREQ_0              7'd34
+`define FR_RX_FREQ_1              7'd35
+`define FR_RX_FREQ_2              7'd36
+`define FR_RX_FREQ_3              7'd37
+
+// See below for DDC Starting Phase
+
+// ------------------------------------------------------------------------
+//  configure FPGA Rx mux
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------+-------+-------+-------+-------+-+-----+
+// |      must be zero     | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH |
+// +-----------------------+-------+-------+-------+-------+-+-----+
+//
+// There are a maximum of 4 digital downconverters in the the FPGA.
+// Each DDC has two 16-bit inputs, I and Q, and two 16-bit outputs, I & Q.
+//
+// DDC I inputs are specified by the two bit fields I3, I2, I1 & I0
+//
+//   0 = DDC input is from ADC 0
+//   1 = DDC input is from ADC 1
+//   2 = DDC input is from ADC 2
+//   3 = DDC input is from ADC 3
+//
+// If Z == 1, all DDC Q inputs are set to zero
+// If Z == 0, DDC Q inputs are specified by the two bit fields Q3, Q2, Q1 & Q0
+//
+// NCH specifies the number of complex channels that are sent across
+// the USB.  The legal values are 1, 2 or 4, corresponding to 2, 4 or
+// 8 16-bit values.
+
+`define FR_RX_MUX                 7'd38
+
+// ------------------------------------------------------------------------
+//  configure FPGA Tx Mux.
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------+-------+-------+-------+-------+-+-----+
+// |                       | DAC3  | DAC2  | DAC1  |  DAC0 |0| NCH |
+// +-----------------------------------------------+-------+-+-----+
+//
+// NCH specifies the number of complex channels that are sent across
+// the USB.  The legal values are 1 or 2, corresponding to 2 or 4
+// 16-bit values.
+//
+// There are two interpolators with complex inputs and outputs.
+// There are four DACs.  (We use the DUC in each AD9862.)
+//
+// Each 4-bit DACx field specifies the source for the DAC and
+// whether or not that DAC is enabled.  Each subfield is coded
+// like this: 
+//
+//    3 2 1 0
+//   +-+-----+
+//   |E|  N  |
+//   +-+-----+
+//
+// Where E is set if the DAC is enabled, and N specifies which
+// interpolator output is connected to this DAC.
+//
+//  N   which interp output
+// ---  -------------------
+//  0   chan 0 I
+//  1   chan 0 Q
+//  2   chan 1 I
+//  3   chan 1 Q
+
+`define FR_TX_MUX                 7'd39
+
+// ------------------------------------------------------------------------
+// REFCLK control
+//
+// Control whether a reference clock is sent to the daughterboards,
+// and what frequency.  The refclk is sent on d'board i/o pin 0.
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------------+-+------------+
+// |             Reserved (Must be zero)           |E|   DIVISOR  |
+// +-----------------------------------------------+-+------------+
+
+//
+// Bit 7  -- 1 turns on refclk, 0 allows IO use
+// Bits 6:0 Divider value
+
+`define FR_TX_A_REFCLK            7'd40
+`define FR_RX_A_REFCLK            7'd41
+`define FR_TX_B_REFCLK            7'd42
+`define FR_RX_B_REFCLK            7'd43
+
+
+// ------------------------------------------------------------------------
+// DDC Starting Phase
+
+`define FR_RX_PHASE_0             7'd44
+`define FR_RX_PHASE_1             7'd45
+`define FR_RX_PHASE_2             7'd46
+`define FR_RX_PHASE_3             7'd47
+
+// ------------------------------------------------------------------------
+// Tx data format control register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-------------------------------------------------------+-------+
+// |                    Reserved (Must be zero)            |  FMT  |
+// +-------------------------------------------------------+-------+
+//
+//  FMT values:
+
+`define FR_TX_FORMAT              7'd48
+
+// ------------------------------------------------------------------------
+// Rx data format control register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------+-+-+---------+-------+
+// |          Reserved (Must be zero)        |B|Q|  WIDTH  | SHIFT |
+// +-----------------------------------------+-+-+---------+-------+
+//
+//  FMT values:
+
+`define FR_RX_FORMAT              7'd49
+
+
+// The valid combinations currently are:
+//
+//   B  Q  WIDTH  SHIFT
+//   0  1    16     0
+//   0  1     8     8
+
+
+// Possible future values of WIDTH = {4, 2, 1}
+// 12 takes a bit more work, since we need to know packet alignment.
+
+// ------------------------------------------------------------------------
+// FIXME register numbers 50 to 63 are available
+
+// ------------------------------------------------------------------------
+// Registers 64 to 95 are reserved for user custom FPGA builds.
+// The standard USRP software will not touch these.
+
+`define FR_USER_0                 7'd64
+`define FR_USER_1                 7'd65
+`define FR_USER_2                 7'd66
+`define FR_USER_3                 7'd67
+`define FR_USER_4                 7'd68
+`define FR_USER_5                 7'd69
+`define FR_USER_6                 7'd70
+`define FR_USER_7                 7'd71
+`define FR_USER_8                 7'd72
+`define FR_USER_9                 7'd73
+`define FR_USER_10                7'd74
+`define FR_USER_11                7'd75
+`define FR_USER_12                7'd76
+`define FR_USER_13                7'd77
+`define FR_USER_14                7'd78
+`define FR_USER_15                7'd79
+`define FR_USER_16                7'd80
+`define FR_USER_17                7'd81
+`define FR_USER_18                7'd82
+`define FR_USER_19                7'd83
+`define FR_USER_20                7'd84
+`define FR_USER_21                7'd85
+`define FR_USER_22                7'd86
+`define FR_USER_23                7'd87
+`define FR_USER_24                7'd88
+`define FR_USER_25                7'd89
+`define FR_USER_26                7'd90
+`define FR_USER_27                7'd91
+`define FR_USER_28                7'd92
+`define FR_USER_29                7'd93
+`define FR_USER_30                7'd94
+`define FR_USER_31                7'd95
+
+//Registers needed for multi usrp master/slave configuration
+//
+//Rx Master/slave control register (FR_RX_MASTER_SLAVE = FR_USER_0)
+//
+`define FR_RX_MASTER_SLAVE        7'd64
+`define bitnoFR_RX_SYNC           0
+`define bitnoFR_RX_SYNC_MASTER    1
+`define bitnoFR_RX_SYNC_SLAVE     2
+
+
+//Caution The master settings will output values on the io lines.
+//They inheritely enable these lines as output. If you have a daughtercard which uses these lines also as output then you will burn your usrp and daughtercard.
+//If you set the slave bits then your usrp won't do anything if you don't connect a master.
+// Rx Master/slave control register
+//
+// The way this is supposed to be used is connecting a (short) 16pin flatcable from an rx daughterboard in RXA master io_rx[8..15] to slave io_rx[8..15] on RXA of slave usrp
+// This can be done with basic_rx boards or dbsrx boards
+//dbsrx: connect master-J25 to slave-J25
+//basic rx: connect J25 to slave-J25
+//CAUTION: pay attention to the lineup of your connector.
+//The red line (pin1) should be at the same side of the daughterboards on master and slave.
+//If you turnaround the cable on one end you will burn your usrp.
+
+//You cannot use a 16pin flatcable if you are using FLEX400 or FLEX2400 daughterboards, since these use a lot of the io pins.
+//You can still link them but you must use only a 2pin or 1pin cable
+//You can also use a 2-wire link. put a 2pin header on io[15],gnd of the master RXA daughterboard and connect it to io15,gnd of the slave RXA db.
+//You can use a cable like the ones found with the leds on the mainbord of a PC.
+//Make sure you don't twist the cable, otherwise you connect the sync output to ground.
+//To be save you could also just use a single wire from master io[15] to slave io[15], but this is not optimal for signal integrity.
+
+
+// Since rx_io[0] can normally be used as a refclk and is not exported on all daughterboards this line
+// still has the refclk function if you use the master/slave setup (it is not touched by the master/slave settings).
+// The master/slave circuitry will only use io pin 15 and does not touch any of the other io pins.
+`define bitnoFR_RX_SYNC_INPUT_IOPIN 15
+`define bmFR_RX_SYNC_INPUT_IOPIN  (1<<bitnoFR_RX_SYNC_INPUT_IOPIN)
+//TODO the output pin is still hardcoded in the verilog code, make it listen to the following define
+`define bitnoFR_RX_SYNC_OUTPUT_IOPIN 15
+`define bmFR_RX_SYNC_OUTPUT_IOPIN (1<<bitnoFR_RX_SYNC_OUTPUT_IOPIN)
+// =======================================================================
+// READBACK Registers
+// =======================================================================
+
+`define FR_RB_IO_RX_A_IO_TX_A     7'd1	// read back a-side i/o pins
+`define FR_RB_IO_RX_B_IO_TX_B     7'd2	// read back b-side i/o pins
+
+// ------------------------------------------------------------------------
+// FPGA Capability register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------------+-+-----+-+-----+
+// |                    Reserved (Must be zero)    |T|NDUC |R|NDDC |
+// +-----------------------------------------------+-+-----+-+-----+
+//
+// Bottom 4-bits are Rx capabilities
+// Next   4-bits are Tx capabilities
+
+`define FR_RB_CAPS                7'd3
+
+
diff --git a/firmware/fx2/common/fx2regs.h b/firmware/fx2/common/fx2regs.h
new file mode 100644
index 000000000..acbc0b89e
--- /dev/null
+++ b/firmware/fx2/common/fx2regs.h
@@ -0,0 +1,735 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+/*
+//-----------------------------------------------------------------------------
+//   File:      FX2regs.h
+//   Contents:   EZ-USB FX2 register declarations and bit mask definitions.
+//
+// $Archive: /USB/Target/Inc/fx2regs.h $
+// $Date$
+// $Revision$
+//
+//
+//   Copyright (c) 2000 Cypress Semiconductor, All rights reserved
+//-----------------------------------------------------------------------------
+*/
+
+
+#ifndef FX2REGS_H   /* Header Sentry */
+#define FX2REGS_H
+
+#define ALLOCATE_EXTERN		// required for "right thing to happen" with fx2regs.h
+
+/*
+//-----------------------------------------------------------------------------
+// FX2 Related Register Assignments
+//-----------------------------------------------------------------------------
+
+// The Ez-USB FX2 registers are defined here. We use FX2regs.h for register 
+// address allocation by using "#define ALLOCATE_EXTERN". 
+// When using "#define ALLOCATE_EXTERN", you get (for instance): 
+// xdata volatile BYTE OUT7BUF[64]   _at_   0x7B40;
+// Such lines are created from FX2.h by using the preprocessor. 
+// Incidently, these lines will not generate any space in the resulting hex 
+// file; they just bind the symbols to the addresses for compilation. 
+// You just need to put "#define ALLOCATE_EXTERN" in your main program file; 
+// i.e. fw.c or a stand-alone C source file. 
+// Without "#define ALLOCATE_EXTERN", you just get the external reference: 
+// extern xdata volatile BYTE OUT7BUF[64]   ;//   0x7B40;
+// This uses the concatenation operator "##" to insert a comment "//" 
+// to cut off the end of the line, "_at_   0x7B40;", which is not wanted.
+*/
+
+
+#ifdef ALLOCATE_EXTERN
+#define EXTERN
+#define _AT_(a) at a
+#else
+#define EXTERN extern
+#define _AT_ ;/ ## /
+#endif
+
+typedef unsigned char BYTE;
+typedef unsigned short WORD;
+
+EXTERN xdata _AT_(0xE400) volatile BYTE GPIF_WAVE_DATA[128];
+EXTERN xdata _AT_(0xE480) volatile BYTE RES_WAVEDATA_END  ;
+
+// General Configuration
+
+EXTERN xdata _AT_(0xE600) volatile BYTE CPUCS             ;  // Control & Status
+EXTERN xdata _AT_(0xE601) volatile BYTE IFCONFIG          ;  // Interface Configuration
+EXTERN xdata _AT_(0xE602) volatile BYTE PINFLAGSAB        ;  // FIFO FLAGA and FLAGB Assignments
+EXTERN xdata _AT_(0xE603) volatile BYTE PINFLAGSCD        ;  // FIFO FLAGC and FLAGD Assignments
+EXTERN xdata _AT_(0xE604) volatile BYTE FIFORESET         ;  // Restore FIFOS to default state
+EXTERN xdata _AT_(0xE605) volatile BYTE BREAKPT           ;  // Breakpoint
+EXTERN xdata _AT_(0xE606) volatile BYTE BPADDRH           ;  // Breakpoint Address H
+EXTERN xdata _AT_(0xE607) volatile BYTE BPADDRL           ;  // Breakpoint Address L
+EXTERN xdata _AT_(0xE608) volatile BYTE UART230           ;  // 230 Kbaud clock for T0,T1,T2
+EXTERN xdata _AT_(0xE609) volatile BYTE FIFOPINPOLAR      ;  // FIFO polarities
+EXTERN xdata _AT_(0xE60A) volatile BYTE REVID             ;  // Chip Revision
+EXTERN xdata _AT_(0xE60B) volatile BYTE REVCTL            ;  // Chip Revision Control
+
+// Endpoint Configuration
+EXTERN xdata _AT_(0xE610) volatile BYTE EP1OUTCFG         ;  // Endpoint 1-OUT Configuration
+EXTERN xdata _AT_(0xE611) volatile BYTE EP1INCFG          ;  // Endpoint 1-IN Configuration
+EXTERN xdata _AT_(0xE612) volatile BYTE EP2CFG            ;  // Endpoint 2 Configuration
+EXTERN xdata _AT_(0xE613) volatile BYTE EP4CFG            ;  // Endpoint 4 Configuration
+EXTERN xdata _AT_(0xE614) volatile BYTE EP6CFG            ;  // Endpoint 6 Configuration
+EXTERN xdata _AT_(0xE615) volatile BYTE EP8CFG            ;  // Endpoint 8 Configuration
+EXTERN xdata _AT_(0xE618) volatile BYTE EP2FIFOCFG        ;  // Endpoint 2 FIFO configuration
+EXTERN xdata _AT_(0xE619) volatile BYTE EP4FIFOCFG        ;  // Endpoint 4 FIFO configuration
+EXTERN xdata _AT_(0xE61A) volatile BYTE EP6FIFOCFG        ;  // Endpoint 6 FIFO configuration
+EXTERN xdata _AT_(0xE61B) volatile BYTE EP8FIFOCFG        ;  // Endpoint 8 FIFO configuration
+EXTERN xdata _AT_(0xE620) volatile BYTE EP2AUTOINLENH     ;  // Endpoint 2 Packet Length H (IN only)
+EXTERN xdata _AT_(0xE621) volatile BYTE EP2AUTOINLENL     ;  // Endpoint 2 Packet Length L (IN only)
+EXTERN xdata _AT_(0xE622) volatile BYTE EP4AUTOINLENH     ;  // Endpoint 4 Packet Length H (IN only)
+EXTERN xdata _AT_(0xE623) volatile BYTE EP4AUTOINLENL     ;  // Endpoint 4 Packet Length L (IN only)
+EXTERN xdata _AT_(0xE624) volatile BYTE EP6AUTOINLENH     ;  // Endpoint 6 Packet Length H (IN only)
+EXTERN xdata _AT_(0xE625) volatile BYTE EP6AUTOINLENL     ;  // Endpoint 6 Packet Length L (IN only)
+EXTERN xdata _AT_(0xE626) volatile BYTE EP8AUTOINLENH     ;  // Endpoint 8 Packet Length H (IN only)
+EXTERN xdata _AT_(0xE627) volatile BYTE EP8AUTOINLENL     ;  // Endpoint 8 Packet Length L (IN only)
+EXTERN xdata _AT_(0xE630) volatile BYTE EP2FIFOPFH        ;  // EP2 Programmable Flag trigger H
+EXTERN xdata _AT_(0xE631) volatile BYTE EP2FIFOPFL        ;  // EP2 Programmable Flag trigger L
+EXTERN xdata _AT_(0xE632) volatile BYTE EP4FIFOPFH        ;  // EP4 Programmable Flag trigger H
+EXTERN xdata _AT_(0xE633) volatile BYTE EP4FIFOPFL        ;  // EP4 Programmable Flag trigger L
+EXTERN xdata _AT_(0xE634) volatile BYTE EP6FIFOPFH        ;  // EP6 Programmable Flag trigger H
+EXTERN xdata _AT_(0xE635) volatile BYTE EP6FIFOPFL        ;  // EP6 Programmable Flag trigger L
+EXTERN xdata _AT_(0xE636) volatile BYTE EP8FIFOPFH        ;  // EP8 Programmable Flag trigger H
+EXTERN xdata _AT_(0xE637) volatile BYTE EP8FIFOPFL        ;  // EP8 Programmable Flag trigger L
+EXTERN xdata _AT_(0xE640) volatile BYTE EP2ISOINPKTS      ;  // EP2 (if ISO) IN Packets per frame (1-3)
+EXTERN xdata _AT_(0xE641) volatile BYTE EP4ISOINPKTS      ;  // EP4 (if ISO) IN Packets per frame (1-3)
+EXTERN xdata _AT_(0xE642) volatile BYTE EP6ISOINPKTS      ;  // EP6 (if ISO) IN Packets per frame (1-3)
+EXTERN xdata _AT_(0xE643) volatile BYTE EP8ISOINPKTS      ;  // EP8 (if ISO) IN Packets per frame (1-3)
+EXTERN xdata _AT_(0xE648) volatile BYTE INPKTEND          ;  // Force IN Packet End
+EXTERN xdata _AT_(0xE649) volatile BYTE OUTPKTEND         ;  // Force OUT Packet End
+
+// Interrupts
+
+EXTERN xdata _AT_(0xE650) volatile BYTE EP2FIFOIE         ;  // Endpoint 2 Flag Interrupt Enable
+EXTERN xdata _AT_(0xE651) volatile BYTE EP2FIFOIRQ        ;  // Endpoint 2 Flag Interrupt Request
+EXTERN xdata _AT_(0xE652) volatile BYTE EP4FIFOIE         ;  // Endpoint 4 Flag Interrupt Enable
+EXTERN xdata _AT_(0xE653) volatile BYTE EP4FIFOIRQ        ;  // Endpoint 4 Flag Interrupt Request
+EXTERN xdata _AT_(0xE654) volatile BYTE EP6FIFOIE         ;  // Endpoint 6 Flag Interrupt Enable
+EXTERN xdata _AT_(0xE655) volatile BYTE EP6FIFOIRQ        ;  // Endpoint 6 Flag Interrupt Request
+EXTERN xdata _AT_(0xE656) volatile BYTE EP8FIFOIE         ;  // Endpoint 8 Flag Interrupt Enable
+EXTERN xdata _AT_(0xE657) volatile BYTE EP8FIFOIRQ        ;  // Endpoint 8 Flag Interrupt Request
+EXTERN xdata _AT_(0xE658) volatile BYTE IBNIE             ;  // IN-BULK-NAK Interrupt Enable
+EXTERN xdata _AT_(0xE659) volatile BYTE IBNIRQ            ;  // IN-BULK-NAK interrupt Request
+EXTERN xdata _AT_(0xE65A) volatile BYTE NAKIE             ;  // Endpoint Ping NAK interrupt Enable
+EXTERN xdata _AT_(0xE65B) volatile BYTE NAKIRQ            ;  // Endpoint Ping NAK interrupt Request
+EXTERN xdata _AT_(0xE65C) volatile BYTE USBIE             ;  // USB Int Enables
+EXTERN xdata _AT_(0xE65D) volatile BYTE USBIRQ            ;  // USB Interrupt Requests
+EXTERN xdata _AT_(0xE65E) volatile BYTE EPIE              ;  // Endpoint Interrupt Enables
+EXTERN xdata _AT_(0xE65F) volatile BYTE EPIRQ             ;  // Endpoint Interrupt Requests
+EXTERN xdata _AT_(0xE660) volatile BYTE GPIFIE            ;  // GPIF Interrupt Enable
+EXTERN xdata _AT_(0xE661) volatile BYTE GPIFIRQ           ;  // GPIF Interrupt Request
+EXTERN xdata _AT_(0xE662) volatile BYTE USBERRIE          ;  // USB Error Interrupt Enables
+EXTERN xdata _AT_(0xE663) volatile BYTE USBERRIRQ         ;  // USB Error Interrupt Requests
+EXTERN xdata _AT_(0xE664) volatile BYTE ERRCNTLIM         ;  // USB Error counter and limit
+EXTERN xdata _AT_(0xE665) volatile BYTE CLRERRCNT         ;  // Clear Error Counter EC[3..0]
+EXTERN xdata _AT_(0xE666) volatile BYTE INT2IVEC          ;  // Interupt 2 (USB) Autovector
+EXTERN xdata _AT_(0xE667) volatile BYTE INT4IVEC          ;  // Interupt 4 (FIFOS & GPIF) Autovector
+EXTERN xdata _AT_(0xE668) volatile BYTE INTSETUP          ;  // Interrupt 2&4 Setup
+
+// Input/Output
+
+EXTERN xdata _AT_(0xE670) volatile BYTE PORTACFG          ;  // I/O PORTA Alternate Configuration
+EXTERN xdata _AT_(0xE671) volatile BYTE PORTCCFG          ;  // I/O PORTC Alternate Configuration
+EXTERN xdata _AT_(0xE672) volatile BYTE PORTECFG          ;  // I/O PORTE Alternate Configuration
+EXTERN xdata _AT_(0xE678) volatile BYTE I2CS              ;  // Control & Status
+EXTERN xdata _AT_(0xE679) volatile BYTE I2DAT             ;  // Data
+EXTERN xdata _AT_(0xE67A) volatile BYTE I2CTL             ;  // I2C Control
+EXTERN xdata _AT_(0xE67B) volatile BYTE XAUTODAT1         ;  // Autoptr1 MOVX access
+EXTERN xdata _AT_(0xE67C) volatile BYTE XAUTODAT2         ;  // Autoptr2 MOVX access
+
+#define EXTAUTODAT1 XAUTODAT1
+#define EXTAUTODAT2 XAUTODAT2
+
+// USB Control
+
+EXTERN xdata _AT_(0xE680) volatile BYTE USBCS             ;  // USB Control & Status
+EXTERN xdata _AT_(0xE681) volatile BYTE SUSPEND           ;  // Put chip into suspend
+EXTERN xdata _AT_(0xE682) volatile BYTE WAKEUPCS          ;  // Wakeup source and polarity
+EXTERN xdata _AT_(0xE683) volatile BYTE TOGCTL            ;  // Toggle Control
+EXTERN xdata _AT_(0xE684) volatile BYTE USBFRAMEH         ;  // USB Frame count H
+EXTERN xdata _AT_(0xE685) volatile BYTE USBFRAMEL         ;  // USB Frame count L
+EXTERN xdata _AT_(0xE686) volatile BYTE MICROFRAME        ;  // Microframe count, 0-7
+EXTERN xdata _AT_(0xE687) volatile BYTE FNADDR            ;  // USB Function address
+
+// Endpoints
+
+EXTERN xdata _AT_(0xE68A) volatile BYTE EP0BCH            ;  // Endpoint 0 Byte Count H
+EXTERN xdata _AT_(0xE68B) volatile BYTE EP0BCL            ;  // Endpoint 0 Byte Count L
+EXTERN xdata _AT_(0xE68D) volatile BYTE EP1OUTBC          ;  // Endpoint 1 OUT Byte Count
+EXTERN xdata _AT_(0xE68F) volatile BYTE EP1INBC           ;  // Endpoint 1 IN Byte Count
+EXTERN xdata _AT_(0xE690) volatile BYTE EP2BCH            ;  // Endpoint 2 Byte Count H
+EXTERN xdata _AT_(0xE691) volatile BYTE EP2BCL            ;  // Endpoint 2 Byte Count L
+EXTERN xdata _AT_(0xE694) volatile BYTE EP4BCH            ;  // Endpoint 4 Byte Count H
+EXTERN xdata _AT_(0xE695) volatile BYTE EP4BCL            ;  // Endpoint 4 Byte Count L
+EXTERN xdata _AT_(0xE698) volatile BYTE EP6BCH            ;  // Endpoint 6 Byte Count H
+EXTERN xdata _AT_(0xE699) volatile BYTE EP6BCL            ;  // Endpoint 6 Byte Count L
+EXTERN xdata _AT_(0xE69C) volatile BYTE EP8BCH            ;  // Endpoint 8 Byte Count H
+EXTERN xdata _AT_(0xE69D) volatile BYTE EP8BCL            ;  // Endpoint 8 Byte Count L
+EXTERN xdata _AT_(0xE6A0) volatile BYTE EP0CS             ;  // Endpoint  Control and Status
+EXTERN xdata _AT_(0xE6A1) volatile BYTE EP1OUTCS          ;  // Endpoint 1 OUT Control and Status
+EXTERN xdata _AT_(0xE6A2) volatile BYTE EP1INCS           ;  // Endpoint 1 IN Control and Status
+EXTERN xdata _AT_(0xE6A3) volatile BYTE EP2CS             ;  // Endpoint 2 Control and Status
+EXTERN xdata _AT_(0xE6A4) volatile BYTE EP4CS             ;  // Endpoint 4 Control and Status
+EXTERN xdata _AT_(0xE6A5) volatile BYTE EP6CS             ;  // Endpoint 6 Control and Status
+EXTERN xdata _AT_(0xE6A6) volatile BYTE EP8CS             ;  // Endpoint 8 Control and Status
+EXTERN xdata _AT_(0xE6A7) volatile BYTE EP2FIFOFLGS       ;  // Endpoint 2 Flags
+EXTERN xdata _AT_(0xE6A8) volatile BYTE EP4FIFOFLGS       ;  // Endpoint 4 Flags
+EXTERN xdata _AT_(0xE6A9) volatile BYTE EP6FIFOFLGS       ;  // Endpoint 6 Flags
+EXTERN xdata _AT_(0xE6AA) volatile BYTE EP8FIFOFLGS       ;  // Endpoint 8 Flags
+EXTERN xdata _AT_(0xE6AB) volatile BYTE EP2FIFOBCH        ;  // EP2 FIFO total byte count H
+EXTERN xdata _AT_(0xE6AC) volatile BYTE EP2FIFOBCL        ;  // EP2 FIFO total byte count L
+EXTERN xdata _AT_(0xE6AD) volatile BYTE EP4FIFOBCH        ;  // EP4 FIFO total byte count H
+EXTERN xdata _AT_(0xE6AE) volatile BYTE EP4FIFOBCL        ;  // EP4 FIFO total byte count L
+EXTERN xdata _AT_(0xE6AF) volatile BYTE EP6FIFOBCH        ;  // EP6 FIFO total byte count H
+EXTERN xdata _AT_(0xE6B0) volatile BYTE EP6FIFOBCL        ;  // EP6 FIFO total byte count L
+EXTERN xdata _AT_(0xE6B1) volatile BYTE EP8FIFOBCH        ;  // EP8 FIFO total byte count H
+EXTERN xdata _AT_(0xE6B2) volatile BYTE EP8FIFOBCL        ;  // EP8 FIFO total byte count L
+EXTERN xdata _AT_(0xE6B3) volatile BYTE SUDPTRH           ;  // Setup Data Pointer high address byte
+EXTERN xdata _AT_(0xE6B4) volatile BYTE SUDPTRL           ;  // Setup Data Pointer low address byte
+EXTERN xdata _AT_(0xE6B5) volatile BYTE SUDPTRCTL         ;  // Setup Data Pointer Auto Mode
+EXTERN xdata _AT_(0xE6B8) volatile BYTE SETUPDAT[8]       ;  // 8 bytes of SETUP data
+
+// GPIF
+
+EXTERN xdata _AT_(0xE6C0) volatile BYTE GPIFWFSELECT      ;  // Waveform Selector
+EXTERN xdata _AT_(0xE6C1) volatile BYTE GPIFIDLECS        ;  // GPIF Done, GPIF IDLE drive mode
+EXTERN xdata _AT_(0xE6C2) volatile BYTE GPIFIDLECTL       ;  // Inactive Bus, CTL states
+EXTERN xdata _AT_(0xE6C3) volatile BYTE GPIFCTLCFG        ;  // CTL OUT pin drive
+EXTERN xdata _AT_(0xE6C4) volatile BYTE GPIFADRH          ;  // GPIF Address H
+EXTERN xdata _AT_(0xE6C5) volatile BYTE GPIFADRL          ;  // GPIF Address L
+
+EXTERN xdata _AT_(0xE6CE) volatile BYTE GPIFTCB3          ;  // GPIF Transaction Count Byte 3
+EXTERN xdata _AT_(0xE6CF) volatile BYTE GPIFTCB2          ;  // GPIF Transaction Count Byte 2
+EXTERN xdata _AT_(0xE6D0) volatile BYTE GPIFTCB1          ;  // GPIF Transaction Count Byte 1
+EXTERN xdata _AT_(0xE6D1) volatile BYTE GPIFTCB0          ;  // GPIF Transaction Count Byte 0
+
+#define EP2GPIFTCH GPIFTCB1   // these are here for backwards compatibility
+#define EP2GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
+#define EP4GPIFTCH GPIFTCB1   // these are here for backwards compatibility
+#define EP4GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
+#define EP6GPIFTCH GPIFTCB1   // these are here for backwards compatibility
+#define EP6GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
+#define EP8GPIFTCH GPIFTCB1   // these are here for backwards compatibility
+#define EP8GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
+
+// EXTERN xdata volatile BYTE EP2GPIFTCH     _AT_ 0xE6D0;  // EP2 GPIF Transaction Count High
+// EXTERN xdata volatile BYTE EP2GPIFTCL     _AT_ 0xE6D1;  // EP2 GPIF Transaction Count Low
+EXTERN xdata _AT_(0xE6D2) volatile BYTE EP2GPIFFLGSEL     ;  // EP2 GPIF Flag select
+EXTERN xdata _AT_(0xE6D3) volatile BYTE EP2GPIFPFSTOP     ;  // Stop GPIF EP2 transaction on prog. flag
+EXTERN xdata _AT_(0xE6D4) volatile BYTE EP2GPIFTRIG       ;  // EP2 FIFO Trigger
+// EXTERN xdata volatile BYTE EP4GPIFTCH     _AT_ 0xE6D8;  // EP4 GPIF Transaction Count High
+// EXTERN xdata volatile BYTE EP4GPIFTCL     _AT_ 0xE6D9;  // EP4 GPIF Transactionr Count Low
+EXTERN xdata _AT_(0xE6DA) volatile BYTE EP4GPIFFLGSEL     ;  // EP4 GPIF Flag select
+EXTERN xdata _AT_(0xE6DB) volatile BYTE EP4GPIFPFSTOP     ;  // Stop GPIF EP4 transaction on prog. flag
+EXTERN xdata _AT_(0xE6DC) volatile BYTE EP4GPIFTRIG       ;  // EP4 FIFO Trigger
+// EXTERN xdata volatile BYTE EP6GPIFTCH     _AT_ 0xE6E0;  // EP6 GPIF Transaction Count High
+// EXTERN xdata volatile BYTE EP6GPIFTCL     _AT_ 0xE6E1;  // EP6 GPIF Transaction Count Low
+EXTERN xdata _AT_(0xE6E2) volatile BYTE EP6GPIFFLGSEL     ;  // EP6 GPIF Flag select
+EXTERN xdata _AT_(0xE6E3) volatile BYTE EP6GPIFPFSTOP     ;  // Stop GPIF EP6 transaction on prog. flag
+EXTERN xdata _AT_(0xE6E4) volatile BYTE EP6GPIFTRIG       ;  // EP6 FIFO Trigger
+// EXTERN xdata volatile BYTE EP8GPIFTCH     _AT_ 0xE6E8;  // EP8 GPIF Transaction Count High
+// EXTERN xdata volatile BYTE EP8GPIFTCL     _AT_ 0xE6E9;  // EP8GPIF Transaction Count Low
+EXTERN xdata _AT_(0xE6EA) volatile BYTE EP8GPIFFLGSEL     ;  // EP8 GPIF Flag select
+EXTERN xdata _AT_(0xE6EB) volatile BYTE EP8GPIFPFSTOP     ;  // Stop GPIF EP8 transaction on prog. flag
+EXTERN xdata _AT_(0xE6EC) volatile BYTE EP8GPIFTRIG       ;  // EP8 FIFO Trigger
+EXTERN xdata _AT_(0xE6F0) volatile BYTE XGPIFSGLDATH      ;  // GPIF Data H (16-bit mode only)
+EXTERN xdata _AT_(0xE6F1) volatile BYTE XGPIFSGLDATLX     ;  // Read/Write GPIF Data L & trigger transac
+EXTERN xdata _AT_(0xE6F2) volatile BYTE XGPIFSGLDATLNOX   ;  // Read GPIF Data L, no transac trigger
+EXTERN xdata _AT_(0xE6F3) volatile BYTE GPIFREADYCFG      ;  // Internal RDY,Sync/Async, RDY5CFG
+EXTERN xdata _AT_(0xE6F4) volatile BYTE GPIFREADYSTAT     ;  // RDY pin states
+EXTERN xdata _AT_(0xE6F5) volatile BYTE GPIFABORT         ;  // Abort GPIF cycles
+
+// UDMA
+
+EXTERN xdata _AT_(0xE6C6) volatile BYTE FLOWSTATE         ; //Defines GPIF flow state
+EXTERN xdata _AT_(0xE6C7) volatile BYTE FLOWLOGIC         ; //Defines flow/hold decision criteria
+EXTERN xdata _AT_(0xE6C8) volatile BYTE FLOWEQ0CTL        ; //CTL states during active flow state
+EXTERN xdata _AT_(0xE6C9) volatile BYTE FLOWEQ1CTL        ; //CTL states during hold flow state
+EXTERN xdata _AT_(0xE6CA) volatile BYTE FLOWHOLDOFF       ;
+EXTERN xdata _AT_(0xE6CB) volatile BYTE FLOWSTB           ; //CTL/RDY Signal to use as master data strobe 
+EXTERN xdata _AT_(0xE6CC) volatile BYTE FLOWSTBEDGE       ; //Defines active master strobe edge
+EXTERN xdata _AT_(0xE6CD) volatile BYTE FLOWSTBHPERIOD    ; //Half Period of output master strobe
+EXTERN xdata _AT_(0xE60C) volatile BYTE GPIFHOLDAMOUNT    ; //Data delay shift 
+EXTERN xdata _AT_(0xE67D) volatile BYTE UDMACRCH          ; //CRC Upper byte
+EXTERN xdata _AT_(0xE67E) volatile BYTE UDMACRCL          ; //CRC Lower byte
+EXTERN xdata _AT_(0xE67F) volatile BYTE UDMACRCQUAL       ; //UDMA In only, host terminated use only
+
+
+// Debug/Test
+
+EXTERN xdata _AT_(0xE6F8) volatile BYTE DBUG              ;  // Debug
+EXTERN xdata _AT_(0xE6F9) volatile BYTE TESTCFG           ;  // Test configuration
+EXTERN xdata _AT_(0xE6FA) volatile BYTE USBTEST           ;  // USB Test Modes
+EXTERN xdata _AT_(0xE6FB) volatile BYTE CT1               ;  // Chirp Test--Override
+EXTERN xdata _AT_(0xE6FC) volatile BYTE CT2               ;  // Chirp Test--FSM
+EXTERN xdata _AT_(0xE6FD) volatile BYTE CT3               ;  // Chirp Test--Control Signals
+EXTERN xdata _AT_(0xE6FE) volatile BYTE CT4               ;  // Chirp Test--Inputs
+
+// Endpoint Buffers
+
+EXTERN xdata _AT_(0xE740) volatile BYTE EP0BUF[64]        ;  // EP0 IN-OUT buffer
+EXTERN xdata _AT_(0xE780) volatile BYTE EP1OUTBUF[64]     ;  // EP1-OUT buffer
+EXTERN xdata _AT_(0xE7C0) volatile BYTE EP1INBUF[64]      ;  // EP1-IN buffer
+EXTERN xdata _AT_(0xF000) volatile BYTE EP2FIFOBUF[1024]  ;  // 512/1024-byte EP2 buffer (IN or OUT)
+EXTERN xdata _AT_(0xF400) volatile BYTE EP4FIFOBUF[1024]  ;  // 512 byte EP4 buffer (IN or OUT)
+EXTERN xdata _AT_(0xF800) volatile BYTE EP6FIFOBUF[1024]  ;  // 512/1024-byte EP6 buffer (IN or OUT)
+EXTERN xdata _AT_(0xFC00) volatile BYTE EP8FIFOBUF[1024]  ;  // 512 byte EP8 buffer (IN or OUT)
+
+#undef EXTERN
+#undef _AT_
+
+/*-----------------------------------------------------------------------------
+   Special Function Registers (SFRs)
+   The byte registers and bits defined in the following list are based
+   on the Synopsis definition of the 8051 Special Function Registers for EZ-USB. 
+    If you modify the register definitions below, please regenerate the file 
+    "ezregs.inc" which includes the same basic information for assembly inclusion.
+-----------------------------------------------------------------------------*/
+
+sfr at 0x80 IOA;
+sfr at 0x81 SP;
+sfr at 0x82 DPL;
+sfr at 0x83 DPH;
+sfr at 0x84 DPL1;
+sfr at 0x85 DPH1;
+sfr at 0x86 DPS;
+         /*  DPS  */
+         sbit at 0x86+0 SEL;
+sfr at 0x87 PCON;   /*  PCON  */
+         //sbit IDLE   = 0x87+0;
+         //sbit STOP   = 0x87+1;
+         //sbit GF0    = 0x87+2;
+         //sbit GF1    = 0x87+3;
+         //sbit SMOD0  = 0x87+7;
+sfr at 0x88 TCON;
+         /*  TCON  */
+         sbit at 0x88+0 IT0;
+         sbit at 0x88+1 IE0;
+         sbit at 0x88+2 IT1;
+         sbit at 0x88+3 IE1;
+         sbit at 0x88+4 TR0;
+         sbit at 0x88+5 TF0;
+         sbit at 0x88+6 TR1;
+         sbit at 0x88+7 TF1;
+sfr at 0x89 TMOD;
+         /*  TMOD  */
+         //sbit M00    = 0x89+0;
+         //sbit M10    = 0x89+1;
+         //sbit CT0    = 0x89+2;
+         //sbit GATE0  = 0x89+3;
+         //sbit M01    = 0x89+4;
+         //sbit M11    = 0x89+5;
+         //sbit CT1    = 0x89+6;
+         //sbit GATE1  = 0x89+7;
+sfr at 0x8A TL0;
+sfr at 0x8B TL1;
+sfr at 0x8C TH0;
+sfr at 0x8D TH1;
+sfr at 0x8E CKCON;
+         /*  CKCON  */
+         //sbit MD0    = 0x89+0;
+         //sbit MD1    = 0x89+1;
+         //sbit MD2    = 0x89+2;
+         //sbit T0M    = 0x89+3;
+         //sbit T1M    = 0x89+4;
+         //sbit T2M    = 0x89+5;
+// sfr at 0x8F SPC_FNC; // Was WRS in Reg320
+         /*  CKCON  */
+         //sbit WRS    = 0x8F+0;
+sfr at 0x90 IOB;
+sfr at 0x91 EXIF; // EXIF Bit Values differ from Reg320
+         /*  EXIF  */
+         //sbit USBINT = 0x91+4;
+         //sbit I2CINT = 0x91+5;
+         //sbit IE4    = 0x91+6;
+         //sbit IE5    = 0x91+7;
+sfr at 0x92 MPAGE;
+sfr at 0x98 SCON0;
+         /*  SCON0  */
+         sbit at 0x98+0 RI;
+         sbit at 0x98+1 TI;
+         sbit at 0x98+2 RB8;
+         sbit at 0x98+3 TB8;
+         sbit at 0x98+4 REN;
+         sbit at 0x98+5 SM2;
+         sbit at 0x98+6 SM1;
+         sbit at 0x98+7 SM0;
+sfr at 0x99 SBUF0;
+
+sfr at 0x9A APTR1H;
+sfr at 0x9B APTR1L;
+sfr at 0x9C AUTODAT1; 
+sfr at 0x9D AUTOPTRH2;
+sfr at 0x9E AUTOPTRL2; 
+sfr at 0x9F AUTODAT2;
+sfr at 0xA0 IOC;
+sfr at 0xA1 INT2CLR;
+sfr at 0xA2 INT4CLR;
+
+#define	AUTOPTRH1	APTR1H
+#define	AUTOPTRL1	APTR1L
+
+sfr at 0xA8 IE;
+         /*  IE  */
+         sbit at 0xA8+0 EX0;
+         sbit at 0xA8+1 ET0;
+         sbit at 0xA8+2 EX1;
+         sbit at 0xA8+3 ET1;
+         sbit at 0xA8+4 ES0;
+         sbit at 0xA8+5 ET2;
+         sbit at 0xA8+6 ES1;
+         sbit at 0xA8+7 EA;
+
+sfr at 0xAA EP2468STAT;
+         /* EP2468STAT */
+         //sbit EP2E   = 0xAA+0;
+         //sbit EP2F   = 0xAA+1;
+         //sbit EP4E   = 0xAA+2;
+         //sbit EP4F   = 0xAA+3;
+         //sbit EP6E   = 0xAA+4;
+         //sbit EP6F   = 0xAA+5;
+         //sbit EP8E   = 0xAA+6;
+         //sbit EP8F   = 0xAA+7;
+
+sfr at 0xAB EP24FIFOFLGS;
+sfr at 0xAC EP68FIFOFLGS;
+sfr at 0xAF AUTOPTRSETUP;
+            /* AUTOPTRSETUP */
+            // sbit EXTACC  = 0xAF+0;
+            // sbit APTR1FZ = 0xAF+1;
+            // sbit APTR2FZ = 0xAF+2;
+
+sfr at 0xB0 IOD;
+sfr at 0xB1 IOE;
+sfr at 0xB2 OEA;
+sfr at 0xB3 OEB;
+sfr at 0xB4 OEC;
+sfr at 0xB5 OED;
+sfr at 0xB6 OEE;
+
+sfr at 0xB8 IP;
+         /*  IP  */
+         sbit at 0xB8+0 PX0;
+         sbit at 0xB8+1 PT0;
+         sbit at 0xB8+2 PX1;
+         sbit at 0xB8+3 PT1;
+         sbit at 0xB8+4 PS0;
+         sbit at 0xB8+5 PT2;
+         sbit at 0xB8+6 PS1;
+
+sfr at 0xBA EP01STAT;
+sfr at 0xBB GPIFTRIG;
+                
+sfr at 0xBD GPIFSGLDATH;
+sfr at 0xBE GPIFSGLDATLX;
+sfr at 0xBF GPIFSGLDATLNOX;
+
+sfr at 0xC0 SCON1;
+         /*  SCON1  */
+         sbit at 0xC0+0 RI1;
+         sbit at 0xC0+1 TI1;
+         sbit at 0xC0+2 RB81;
+         sbit at 0xC0+3 TB81;
+         sbit at 0xC0+4 REN1;
+         sbit at 0xC0+5 SM21;
+         sbit at 0xC0+6 SM11;
+         sbit at 0xC0+7 SM01;
+sfr at 0xC1 SBUF1;
+sfr at 0xC8 T2CON;
+         /*  T2CON  */
+	 sbit at 0xC8+0 CP_RL2;
+	 sbit at 0xC8+1 C_T2;
+         sbit at 0xC8+2 TR2;
+         sbit at 0xC8+3 EXEN2;
+         sbit at 0xC8+4 TCLK;
+         sbit at 0xC8+5 RCLK;
+         sbit at 0xC8+6 EXF2;
+         sbit at 0xC8+7 TF2;
+sfr at 0xCA RCAP2L;
+sfr at 0xCB RCAP2H;
+sfr at 0xCC TL2;
+sfr at 0xCD TH2;
+sfr at 0xD0 PSW;
+         /*  PSW  */
+         sbit at 0xD0+0 P;
+         sbit at 0xD0+1 FL;
+         sbit at 0xD0+2 OV;
+         sbit at 0xD0+3 RS0;
+         sbit at 0xD0+4 RS1;
+         sbit at 0xD0+5 F0;
+         sbit at 0xD0+6 AC;
+         sbit at 0xD0+7 CY;
+sfr at 0xD8 EICON; // Was WDCON in DS80C320 EICON; Bit Values differ from Reg320
+         /*  EICON  */
+         sbit at 0xD8+3 INT6;
+         sbit at 0xD8+4 RESI;
+         sbit at 0xD8+5 ERESI;
+         sbit at 0xD8+7 SMOD1;
+sfr at 0xE0 ACC;
+sfr at 0xE8 EIE; // EIE Bit Values differ from Reg320
+                        /*  EIE  */
+         sbit at 0xE8+0 EIUSB;
+         sbit at 0xE8+1 EI2C;
+         sbit at 0xE8+2 EIEX4;
+         sbit at 0xE8+3 EIEX5;
+         sbit at 0xE8+4 EIEX6;
+sfr at 0xF0 B;
+sfr at 0xF8 EIP; // EIP Bit Values differ from Reg320
+                        /*  EIP  */
+         sbit at 0xF8+0 PUSB;
+         sbit at 0xF8+1 PI2C;
+         sbit at 0xF8+2 EIPX4;
+         sbit at 0xF8+3 EIPX5;
+         sbit at 0xF8+4 EIPX6;
+
+/*-----------------------------------------------------------------------------
+   Bit Masks
+-----------------------------------------------------------------------------*/
+
+#define bmBIT0	1
+#define bmBIT1	2
+#define bmBIT2	4
+#define bmBIT3	8
+#define bmBIT4	16
+#define bmBIT5	32
+#define bmBIT6	64
+#define bmBIT7	128
+
+/* CPU Control & Status Register (CPUCS) */
+#define bmPRTCSTB    bmBIT5
+#define bmCLKSPD     (bmBIT4 | bmBIT3)
+#define bmCLKSPD1    bmBIT4
+#define bmCLKSPD0    bmBIT3
+#define bmCLKINV     bmBIT2
+#define bmCLKOE      bmBIT1
+#define bm8051RES    bmBIT0
+/* Port Alternate Configuration Registers */
+/* Port A (PORTACFG) */
+#define bmFLAGD      bmBIT7
+#define bmINT1       bmBIT1
+#define bmINT0       bmBIT0
+/* Port C (PORTCCFG) */
+#define bmGPIFA7     bmBIT7
+#define bmGPIFA6     bmBIT6
+#define bmGPIFA5     bmBIT5
+#define bmGPIFA4     bmBIT4
+#define bmGPIFA3     bmBIT3
+#define bmGPIFA2     bmBIT2
+#define bmGPIFA1     bmBIT1
+#define bmGPIFA0     bmBIT0
+/* Port E (PORTECFG) */
+#define bmGPIFA8     bmBIT7
+#define bmT2EX       bmBIT6
+#define bmINT6       bmBIT5
+#define bmRXD1OUT    bmBIT4
+#define bmRXD0OUT    bmBIT3
+#define bmT2OUT      bmBIT2
+#define bmT1OUT      bmBIT1
+#define bmT0OUT      bmBIT0
+
+/* I2C Control & Status Register (I2CS) */
+#define bmSTART      bmBIT7
+#define bmSTOP       bmBIT6
+#define bmLASTRD     bmBIT5
+#define bmID         (bmBIT4 | bmBIT3)
+#define bmBERR       bmBIT2
+#define bmACK        bmBIT1
+#define bmDONE       bmBIT0
+/* I2C Control Register (I2CTL) */
+#define bmSTOPIE     bmBIT1
+#define bm400KHZ     bmBIT0
+/* Interrupt 2 (USB) Autovector Register (INT2IVEC) */
+#define bmIV4        bmBIT6
+#define bmIV3        bmBIT5
+#define bmIV2        bmBIT4
+#define bmIV1        bmBIT3
+#define bmIV0        bmBIT2
+/* USB Interrupt Request & Enable Registers (USBIE/USBIRQ) */
+#define bmEP0ACK     bmBIT6
+#define bmHSGRANT    bmBIT5
+#define bmURES       bmBIT4
+#define bmSUSP       bmBIT3
+#define bmSUTOK      bmBIT2
+#define bmSOF        bmBIT1
+#define bmSUDAV      bmBIT0
+/* Breakpoint register (BREAKPT) */
+#define bmBREAK      bmBIT3
+#define bmBPPULSE    bmBIT2
+#define bmBPEN       bmBIT1
+/* Interrupt 2 & 4 Setup (INTSETUP) */
+#define bmAV2EN      bmBIT3
+#define bmINT4IN     bmBIT1
+#define bmAV4EN      bmBIT0
+/* USB Control & Status Register (USBCS) */
+#define bmHSM        bmBIT7
+#define bmDISCON     bmBIT3
+#define bmNOSYNSOF   bmBIT2
+#define bmRENUM      bmBIT1
+#define bmSIGRESUME  bmBIT0
+/* Wakeup Control and Status Register (WAKEUPCS) */
+#define bmWU2        bmBIT7
+#define bmWU         bmBIT6
+#define bmWU2POL     bmBIT5
+#define bmWUPOL      bmBIT4
+#define bmDPEN       bmBIT2
+#define bmWU2EN      bmBIT1
+#define bmWUEN       bmBIT0
+/* End Point 0 Control & Status Register (EP0CS) */
+#define bmHSNAK      bmBIT7
+/* End Point 0-1 Control & Status Registers (EP0CS/EP1OUTCS/EP1INCS) */
+#define bmEPBUSY     bmBIT1
+#define bmEPSTALL    bmBIT0
+/* End Point 2-8 Control & Status Registers (EP2CS/EP4CS/EP6CS/EP8CS) */
+#define bmNPAK       (bmBIT6 | bmBIT5 | bmBIT4)
+#define bmEPFULL     bmBIT3
+#define bmEPEMPTY    bmBIT2
+/* Endpoint Status (EP2468STAT) SFR bits */
+#define bmEP8FULL    bmBIT7
+#define bmEP8EMPTY   bmBIT6
+#define bmEP6FULL    bmBIT5
+#define bmEP6EMPTY   bmBIT4
+#define bmEP4FULL    bmBIT3
+#define bmEP4EMPTY   bmBIT2
+#define bmEP2FULL    bmBIT1
+#define bmEP2EMPTY   bmBIT0
+/* SETUP Data Pointer Auto Mode (SUDPTRCTL) */
+#define bmSDPAUTO    bmBIT0
+/* Endpoint Data Toggle Control (TOGCTL) */
+#define bmQUERYTOGGLE  bmBIT7
+#define bmSETTOGGLE    bmBIT6
+#define bmRESETTOGGLE  bmBIT5
+#define bmTOGCTLEPMASK bmBIT3 | bmBIT2 | bmBIT1 | bmBIT0
+/* IBN (In Bulk Nak) enable and request bits (IBNIE/IBNIRQ) */
+#define bmEP8IBN     bmBIT5
+#define bmEP6IBN     bmBIT4
+#define bmEP4IBN     bmBIT3
+#define bmEP2IBN     bmBIT2
+#define bmEP1IBN     bmBIT1
+#define bmEP0IBN     bmBIT0
+
+/* PING-NAK enable and request bits (NAKIE/NAKIRQ) */
+#define bmEP8PING     bmBIT7
+#define bmEP6PING     bmBIT6
+#define bmEP4PING     bmBIT5
+#define bmEP2PING     bmBIT4
+#define bmEP1PING     bmBIT3
+#define bmEP0PING     bmBIT2
+#define bmIBN         bmBIT0
+
+/* Interface Configuration bits (IFCONFIG) */
+#define bmIFCLKSRC    bmBIT7		// set == INTERNAL
+#define bm3048MHZ     bmBIT6		// set == 48 MHz
+#define bmIFCLKOE     bmBIT5
+#define bmIFCLKPOL    bmBIT4
+#define bmASYNC       bmBIT3
+#define bmGSTATE      bmBIT2
+#define bmIFCFG1      bmBIT1
+#define bmIFCFG0      bmBIT0
+#define bmIFCFGMASK   (bmIFCFG0 | bmIFCFG1)
+#define bmIFGPIF      bmIFCFG1
+#define bmIFSLAVE     (bmIFCFG0 | bmIFCFG1)
+
+/* Slave FIFO pin flags configuration bits (PINFLAGS) */
+#define bmINDEXED     0x0 //which fifo selected by FIFOADR
+#define bmEP2PF       0x4
+#define bmEP4PF       0x5
+#define bmEP6PF       0x6
+#define bmEP8PF       0x7
+#define bmEP2EF       0x8
+#define bmEP4EF       0x9
+#define bmEP6EF       0xA
+#define bmEP8EF       0xB
+#define bmEP2FF       0xC
+#define bmEP4FF       0xD
+#define bmEP6FF       0xE
+#define bmEP8FF       0xF
+
+/* EP 2468 FIFO Configuration bits (EP2FIFOCFG,EP4FIFOCFG,EP6FIFOCFG,EP8FIFOCFG) */
+#define bmINFM       bmBIT6
+#define bmOEP        bmBIT5
+#define bmAUTOOUT    bmBIT4
+#define bmAUTOIN     bmBIT3
+#define bmZEROLENIN  bmBIT2
+//   must be zero    bmBIT1
+#define bmWORDWIDE   bmBIT0
+
+/* EP 24 FIFO Flag bits (EP24FIFOFLGS) */
+#define EP2FIFOEMPTY bmBIT1
+#define EP4FIFOEMPTY bmBIT5
+
+/*
+ * Chip Revision Control Bits (REVCTL) - used to ebable/disable revision specific features
+ */ 
+#define bmNOAUTOARM    bmBIT1	// these don't match the docs
+#define bmSKIPCOMMIT   bmBIT0	// these don't match the docs
+
+#define	bmDYN_OUT      bmBIT1	// these do...
+#define	bmENH_PKT      bmBIT0
+
+
+/* Fifo Reset bits (FIFORESET) */
+#define bmNAKALL       bmBIT7
+
+/* Endpoint Configuration (EPxCFG) */
+#define	bmVALID		bmBIT7
+#define	bmIN		bmBIT6
+#define	bmTYPE1		bmBIT5
+#define	bmTYPE0		bmBIT4
+#define	  bmISOCHRONOUS		bmTYPE0
+#define	  bmBULK		bmTYPE1
+#define	  bmINTERRUPT	       (bmTYPE1 | bmTYPE0)
+#define	bm1KBUF		bmBIT3
+#define	bmBUF1		bmBIT1
+#define	bmBUF0		bmBIT0
+#define	  bmQUADBUF		0
+#define	  bmINVALIDBUF		bmBUF0
+#define	  bmDOUBLEBUF		bmBUF1
+#define	  bmTRIPLEBUF		(bmBUF1 | bmBUF0)
+
+/* OUTPKTEND */
+#define	bmSKIP		bmBIT7	// low 4 bits specify which end point
+
+/* GPIFTRIG defs */
+#define	bmGPIF_IDLE		bmBIT7		// status bit
+
+#define	bmGPIF_EP2_START     	     0
+#define	bmGPIF_EP4_START             1
+#define	bmGPIF_EP6_START             2
+#define	bmGPIF_EP8_START             3
+#define	bmGPIF_READ		bmBIT2
+#define	bmGPIF_WRITE		     0
+
+/* EXIF bits */
+#define	bmEXIF_USBINT		bmBIT4
+#define	bmEXIF_I2CINT		bmBIT5
+#define	bmEXIF_IE4		bmBIT6
+#define	bmEXIF_IE5		bmBIT7
+
+
+#endif   /* FX2REGS_H */
diff --git a/firmware/fx2/common/fx2utils.c b/firmware/fx2/common/fx2utils.c
new file mode 100644
index 000000000..64ffcc896
--- /dev/null
+++ b/firmware/fx2/common/fx2utils.c
@@ -0,0 +1,54 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "fx2utils.h"
+#include "fx2regs.h"
+#include "delay.h"
+
+void
+fx2_stall_ep0 (void)
+{
+  EP0CS |= bmEPSTALL;
+}
+
+void
+fx2_reset_data_toggle (unsigned char ep)
+{
+  TOGCTL = ((ep & 0x80) >> 3 | (ep & 0x0f));
+  TOGCTL |= bmRESETTOGGLE;
+}
+
+void
+fx2_renumerate (void)
+{
+  USBCS |= bmDISCON | bmRENUM;
+
+  // mdelay (1500);		// FIXME why 1.5 seconds?
+  mdelay (250);			// FIXME why 1.5 seconds?
+  
+  USBIRQ = 0xff;		// clear any pending USB irqs...
+  EPIRQ =  0xff;		//   they're from before the renumeration
+
+  EXIF &= ~bmEXIF_USBINT;
+
+  USBCS &= ~bmDISCON;		// reconnect USB
+}
diff --git a/firmware/fx2/common/fx2utils.h b/firmware/fx2/common/fx2utils.h
new file mode 100644
index 000000000..b184dec27
--- /dev/null
+++ b/firmware/fx2/common/fx2utils.h
@@ -0,0 +1,31 @@
+/* -*- c -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef _FX2UTILS_H_
+#define _FX2UTILS_H_
+
+void fx2_stall_ep0 (void);
+void fx2_reset_data_toggle (unsigned char ep);
+void fx2_renumerate (void);
+
+
+
+#endif /* _FX2UTILS_H_ */
diff --git a/firmware/fx2/common/i2c.c b/firmware/fx2/common/i2c.c
new file mode 100644
index 000000000..0f238b5cf
--- /dev/null
+++ b/firmware/fx2/common/i2c.c
@@ -0,0 +1,123 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "i2c.h"
+#include "fx2regs.h"
+#include <string.h>
+
+
+// issue a stop bus cycle and wait for completion
+
+
+// returns non-zero if successful, else 0
+unsigned char
+i2c_read (unsigned char addr, xdata unsigned char *buf, unsigned char len)
+{
+  volatile unsigned char	junk;
+  
+  if (len == 0)			// reading zero bytes always works
+    return 1;
+  
+  while (I2CS & bmSTOP)		// wait for stop to clear
+    ;
+
+  I2CS = bmSTART;
+  I2DAT = (addr << 1) | 1;	// write address and direction (1's the read bit)
+
+  while ((I2CS & bmDONE) == 0)
+    ;
+
+  if ((I2CS & bmBERR) || (I2CS & bmACK) == 0)	// no device answered...
+    goto fail;
+
+  if (len == 1)
+    I2CS |= bmLASTRD;		
+
+  junk = I2DAT;			// trigger the first read cycle
+
+  while (--len != 0){
+    while ((I2CS & bmDONE) == 0)
+      ;
+
+    if (I2CS & bmBERR)
+      goto fail;
+
+    if (len == 1)
+      I2CS |= bmLASTRD;
+    
+    *buf++ = I2DAT;		// get data, trigger another read
+  }
+
+  // wait for final byte
+  
+  while ((I2CS & bmDONE) == 0)
+    ;
+  
+  if (I2CS & bmBERR)
+    goto fail;
+
+  I2CS |= bmSTOP;
+  *buf = I2DAT;
+
+  return 1;
+
+ fail:
+  I2CS |= bmSTOP;
+  return 0;
+}
+
+
+
+// returns non-zero if successful, else 0
+unsigned char
+i2c_write (unsigned char addr, xdata const unsigned char *buf, unsigned char len)
+{
+  while (I2CS & bmSTOP)		// wait for stop to clear
+    ;
+
+  I2CS = bmSTART;
+  I2DAT = (addr << 1) | 0;	// write address and direction (0's the write bit)
+
+  while ((I2CS & bmDONE) == 0)
+    ;
+
+  if ((I2CS & bmBERR) || (I2CS & bmACK) == 0)	// no device answered...
+    goto fail;
+
+  while (len > 0){
+    I2DAT = *buf++;
+    len--;
+
+    while ((I2CS & bmDONE) == 0)
+      ;
+
+    if ((I2CS & bmBERR) || (I2CS & bmACK) == 0)	// no device answered...
+      goto fail;
+  }
+
+  I2CS |= bmSTOP;
+  return 1;
+
+ fail:
+  I2CS |= bmSTOP;
+  return 0;
+}
diff --git a/firmware/fx2/common/i2c.h b/firmware/fx2/common/i2c.h
new file mode 100644
index 000000000..273526dad
--- /dev/null
+++ b/firmware/fx2/common/i2c.h
@@ -0,0 +1,32 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _I2C_H_
+#define _I2C_H_
+
+// returns non-zero if successful, else 0
+unsigned char i2c_read (unsigned char addr, xdata unsigned char *buf, unsigned char len);
+
+// returns non-zero if successful, else 0
+unsigned char i2c_write (unsigned char addr, xdata const unsigned char *buf, unsigned char len);
+
+#endif /* _I2C_H_ */
diff --git a/firmware/fx2/common/init_gpif.c b/firmware/fx2/common/init_gpif.c
new file mode 100644
index 000000000..edde919be
--- /dev/null
+++ b/firmware/fx2/common/init_gpif.c
@@ -0,0 +1,59 @@
+/*
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+
+// These are the tables generated by the Cypress GPIF Designer
+
+extern const char WaveData[128];
+extern const char FlowStates[36];
+extern const char InitData[7];
+
+// The tool is kind of screwed up, in that it doesn't configure some
+// of the ports correctly.  We just use their tables and handle the
+// initialization ourselves.  They also declare that their static
+// initialized data is in xdata, which screws us too.
+
+void
+init_gpif (void)
+{
+  // we've already setup IFCONFIG before calling this...
+
+  GPIFABORT = 0xFF;  // abort any waveforms pending
+  SYNCDELAY;
+ 
+  GPIFREADYCFG = InitData[ 0 ];
+  GPIFCTLCFG = InitData[ 1 ];
+  GPIFIDLECS = InitData[ 2 ];
+  GPIFIDLECTL = InitData[ 3 ];
+  // Hmmm, what's InitData[ 4 ] ...
+  GPIFWFSELECT = InitData[ 5 ];
+  // GPIFREADYSTAT = InitData[ 6 ];	// I think this register is read only...
+ 
+  {
+    BYTE i;
+    
+    for (i = 0; i < 128; i++){
+      GPIF_WAVE_DATA[i] = WaveData[i];
+    }
+  }
+ 
+  FLOWSTATE = 0;		/* ensure it's off */
+}
diff --git a/firmware/fx2/common/isr.c b/firmware/fx2/common/isr.c
new file mode 100644
index 000000000..05412daf5
--- /dev/null
+++ b/firmware/fx2/common/isr.c
@@ -0,0 +1,167 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "isr.h"
+#include "fx2regs.h"
+#include "syncdelay.h"
+
+extern xdata unsigned char _standard_interrupt_vector[];
+extern xdata unsigned char _usb_autovector[];
+extern xdata unsigned char _fifo_gpif_autovector[];
+
+#define LJMP_OPCODE	0x02
+
+/*
+ * Hook standard interrupt vector.
+ *
+ * vector_number is from the SV_<foo> list.
+ * addr is the address of the interrupt service routine.
+ */
+void 
+hook_sv (unsigned char vector_number, unsigned short addr)
+{
+  bit	t;
+  
+  // sanity checks
+
+  if (vector_number < SV_MIN || vector_number > SV_MAX)
+    return;
+
+  if ((vector_number & 0x0f) != 0x03 && (vector_number & 0x0f) != 0x0b)
+    return;
+
+  t = EA;
+  EA = 0;
+  _standard_interrupt_vector[vector_number] = LJMP_OPCODE;
+  _standard_interrupt_vector[vector_number + 1] = addr >> 8;
+  _standard_interrupt_vector[vector_number + 2] = addr & 0xff;
+  EA = t;
+}
+
+/*
+ * Hook usb interrupt vector.
+ *
+ * vector_number is from the UV_<foo> list.
+ * addr is the address of the interrupt service routine.
+ */
+void 
+hook_uv (unsigned char vector_number, unsigned short addr)
+{
+  bit	t;
+  
+  // sanity checks
+
+  if (vector_number < UV_MIN || vector_number > UV_MAX)
+    return;
+
+  if ((vector_number & 0x3) != 0)
+    return;
+
+  t = EA;
+  EA = 0;
+  _usb_autovector[vector_number] = LJMP_OPCODE;
+  _usb_autovector[vector_number + 1] = addr >> 8;
+  _usb_autovector[vector_number + 2] = addr & 0xff;
+  EA = t;
+}
+
+/*
+ * Hook fifo/gpif interrupt vector.
+ *
+ * vector_number is from the FGV_<foo> list.
+ * addr is the address of the interrupt service routine.
+ */
+void 
+hook_fgv (unsigned char vector_number, unsigned short addr)
+{
+  bit	t;
+  
+  // sanity checks
+
+  if (vector_number < FGV_MIN || vector_number > FGV_MAX)
+    return;
+
+  if ((vector_number & 0x3) != 0)
+    return;
+
+  t = EA;
+  EA = 0;
+  _fifo_gpif_autovector[vector_number] = LJMP_OPCODE;
+  _fifo_gpif_autovector[vector_number + 1] = addr >> 8;
+  _fifo_gpif_autovector[vector_number + 2] = addr & 0xff;
+  EA = t;
+}
+
+/*
+ * One time call to enable autovectoring for both USB and FIFO/GPIF.
+ *
+ * This disables all USB and FIFO/GPIF interrupts and clears
+ * any pending interrupts too.  It leaves the master USB and FIFO/GPIF
+ * interrupts enabled.
+ */
+void
+setup_autovectors (void)
+{
+  // disable master usb and fifo/gpif interrupt enables
+  EIUSB = 0;
+  EIEX4 = 0;
+
+  hook_sv (SV_INT_2, (unsigned short) _usb_autovector);
+  hook_sv (SV_INT_4, (unsigned short) _fifo_gpif_autovector);
+
+  // disable all fifo interrupt enables
+  SYNCDELAY;
+  EP2FIFOIE = 0;	SYNCDELAY;
+  EP4FIFOIE = 0;	SYNCDELAY;
+  EP6FIFOIE = 0;	SYNCDELAY;
+  EP8FIFOIE = 0;	SYNCDELAY;
+
+  // clear all pending fifo irqs	
+  EP2FIFOIRQ = 0xff;	SYNCDELAY;
+  EP4FIFOIRQ = 0xff;	SYNCDELAY;
+  EP6FIFOIRQ = 0xff;	SYNCDELAY;
+  EP8FIFOIRQ = 0xff;	SYNCDELAY;
+
+  IBNIE  = 0;
+  IBNIRQ = 0xff;
+  NAKIE  = 0;
+  NAKIRQ = 0xff;
+  USBIE  = 0;
+  USBIRQ = 0xff;
+  EPIE   = 0;
+  EPIRQ  = 0xff;
+  SYNCDELAY;	GPIFIE = 0;		
+  SYNCDELAY;	GPIFIRQ = 0xff;
+  USBERRIE = 0;
+  USBERRIRQ = 0xff;
+  CLRERRCNT = 0;
+  
+  INTSETUP = bmAV2EN | bmAV4EN | bmINT4IN;
+
+  // clear master irq's for usb and fifo/gpif
+  EXIF &= ~bmEXIF_USBINT;
+  EXIF &= ~bmEXIF_IE4;
+  
+  // enable master usb and fifo/gpif interrrupts
+  EIUSB = 1;
+  EIEX4 = 1;
+}
diff --git a/firmware/fx2/common/isr.h b/firmware/fx2/common/isr.h
new file mode 100644
index 000000000..856532890
--- /dev/null
+++ b/firmware/fx2/common/isr.h
@@ -0,0 +1,172 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _ISR_H_
+#define _ISR_H_
+
+/*
+ * ----------------------------------------------------------------
+ *	routines for managing interrupt services routines
+ * ----------------------------------------------------------------
+ */
+
+/*
+ * The FX2 has three discrete sets of interrupt vectors.
+ * The first set is the standard 8051 vector (13 8-byte entries).
+ * The second set is USB interrupt autovector (32 4-byte entries).
+ * The third set is the FIFO/GPIF autovector (14 4-byte entries).
+ *
+ * Since all the code we're running in the FX2 is ram based, we
+ * forego the typical "initialize the interrupt vectors at link time"
+ * strategy, in favor of calls at run time that install the correct
+ * pointers to functions.
+ */
+
+/*
+ * Standard Vector numbers
+ */
+
+#define	SV_INT_0		0x03
+#define	SV_TIMER_0		0x0b
+#define	SV_INT_1		0x13
+#define	SV_TIMER_1		0x1b
+#define	SV_SERIAL_0		0x23
+#define	SV_TIMER_2		0x2b
+#define	SV_RESUME		0x33
+#define	SV_SERIAL_1		0x3b
+#define	SV_INT_2		0x43		// (INT_2) points at USB autovector
+#define	SV_I2C			0x4b
+#define	SV_INT_4		0x53		// (INT_4) points at FIFO/GPIF autovector
+#define	SV_INT_5		0x5b
+#define	SV_INT_6		0x63
+
+#define	SV_MIN			SV_INT_0
+#define	SV_MAX			SV_INT_6
+
+/*
+ * USB Auto Vector numbers
+ */
+
+#define	UV_SUDAV		0x00
+#define	UV_SOF			0x04
+#define	UV_SUTOK		0x08
+#define	UV_SUSPEND		0x0c
+#define	UV_USBRESET		0x10
+#define	UV_HIGHSPEED		0x14
+#define	UV_EP0ACK		0x18
+#define	UV_SPARE_1C		0x1c
+#define	UV_EP0IN		0x20
+#define	UV_EP0OUT		0x24
+#define	UV_EP1IN		0x28
+#define	UV_EP1OUT		0x2c
+#define	UV_EP2			0x30
+#define	UV_EP4			0x34
+#define	UV_EP6			0x38
+#define	UV_EP8			0x3c
+#define	UV_IBN			0x40
+#define	UV_SPARE_44		0x44
+#define	UV_EP0PINGNAK		0x48
+#define	UV_EP1PINGNAK		0x4c
+#define	UV_EP2PINGNAK		0x50
+#define	UV_EP4PINGNAK		0x54
+#define	UV_EP6PINGNAK		0x58
+#define	UV_EP8PINGNAK		0x5c
+#define	UV_ERRLIMIT		0x60
+#define	UV_SPARE_64		0x64
+#define	UV_SPARE_68		0x68
+#define	UV_SPARE_6C		0x6c
+#define	UV_EP2ISOERR		0x70
+#define	UV_EP4ISOERR		0x74
+#define	UV_EP6ISOERR		0x78
+#define	UV_EP8ISOERR		0x7c
+
+#define	UV_MIN			UV_SUDAV
+#define	UV_MAX			UV_EP8ISOERR
+
+/*
+ * FIFO/GPIF Auto Vector numbers
+ */
+
+#define	FGV_EP2PF		0x00
+#define	FGV_EP4PF		0x04
+#define	FGV_EP6PF		0x08
+#define	FGV_EP8PF		0x0c
+#define	FGV_EP2EF		0x10
+#define	FGV_EP4EF		0x14
+#define	FGV_EP6EF		0x18
+#define	FGV_EP8EF		0x1c
+#define	FGV_EP2FF		0x20
+#define	FGV_EP4FF		0x24
+#define	FGV_EP6FF		0x28
+#define	FGV_EP8FF		0x2c
+#define	FGV_GPIFDONE		0x30
+#define	FGV_GPIFWF		0x34
+
+#define	FGV_MIN			FGV_EP2PF
+#define	FGV_MAX			FGV_GPIFWF
+
+
+/*
+ * Hook standard interrupt vector.
+ *
+ * vector_number is from the SV_<foo> list above.
+ * addr is the address of the interrupt service routine.
+ */
+void hook_sv (unsigned char vector_number, unsigned short addr);
+
+/*
+ * Hook usb interrupt vector.
+ *
+ * vector_number is from the UV_<foo> list above.
+ * addr is the address of the interrupt service routine.
+ */
+void hook_uv (unsigned char vector_number, unsigned short addr);
+
+/*
+ * Hook fifo/gpif interrupt vector.
+ *
+ * vector_number is from the FGV_<foo> list above.
+ * addr is the address of the interrupt service routine.
+ */
+void hook_fgv (unsigned char vector_number, unsigned short addr);
+
+/*
+ * One time call to enable autovectoring for both USB and FIFO/GPIF
+ */
+void setup_autovectors (void);
+
+
+/*
+ * Must be called in each usb interrupt handler
+ */
+#define	clear_usb_irq()			\
+	EXIF &= ~bmEXIF_USBINT;		\
+	INT2CLR = 0
+
+/*
+ * Must be calledin each fifo/gpif interrupt handler
+ */
+#define	clear_fifo_gpif_irq()		\
+	EXIF &= ~bmEXIF_IE4;		\
+	INT4CLR = 0
+
+#endif /* _ISR_H_ */
diff --git a/firmware/fx2/common/spi.c b/firmware/fx2/common/spi.c
new file mode 100644
index 000000000..04a1d8477
--- /dev/null
+++ b/firmware/fx2/common/spi.c
@@ -0,0 +1,381 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004,2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "spi.h"
+#include "usrp_regs.h"
+
+static void
+setup_enables (unsigned char enables)
+{
+  // Software eanbles are active high.
+  // Hardware enables are active low.
+
+  // Uhh, the CODECs are active low, but the FPGA is active high...
+  enables ^= SPI_ENABLE_FPGA;
+
+  // KLUDGE: This code is fragile, but reasonably fast...
+  // low three bits of enables go into port A
+  USRP_PA = USRP_PA | (0x7 << 3);	// disable FPGA, CODEC_A, CODEC_B
+  USRP_PA ^= (enables & 0x7) << 3;	// enable specified devs
+
+  // high four bits of enables go into port E
+  USRP_PE = USRP_PE | (0xf << 4);	// disable TX_A, RX_A, TX_B, RX_B
+  USRP_PE ^= (enables & 0xf0);		// enable specified devs
+}
+
+#define disable_all()	setup_enables (0)
+
+void
+init_spi (void)
+{
+  disable_all ();		/* disable all devs	  */
+  bitS_OUT = 0;			/* idle state has CLK = 0 */
+}
+
+#if 0
+static unsigned char
+count_bits8 (unsigned char v)
+{
+  static unsigned char count4[16] = {
+    0,	// 0
+    1,	// 1
+    1,	// 2
+    2,	// 3
+    1,	// 4
+    2,	// 5
+    2,	// 6
+    3,	// 7
+    1,	// 8
+    2,	// 9
+    2,	// a
+    3,	// b
+    2,	// c
+    3,	// d
+    3,	// e
+    4	// f
+  };
+  return count4[v & 0xf] + count4[(v >> 4) & 0xf];
+}
+
+#else
+
+static unsigned char
+count_bits8 (unsigned char v)
+{
+  unsigned char count = 0;
+  if (v & (1 << 0)) count++;
+  if (v & (1 << 1)) count++;
+  if (v & (1 << 2)) count++;
+  if (v & (1 << 3)) count++;
+  if (v & (1 << 4)) count++;
+  if (v & (1 << 5)) count++;
+  if (v & (1 << 6)) count++;
+  if (v & (1 << 7)) count++;
+  return count;
+}
+#endif
+
+static void
+write_byte_msb (unsigned char v);
+
+static void
+write_bytes_msb (const xdata unsigned char *buf, unsigned char len);
+
+static void
+read_bytes_msb (xdata unsigned char *buf, unsigned char len);
+
+  
+// returns non-zero if successful, else 0
+unsigned char
+spi_read (unsigned char header_hi, unsigned char header_lo,
+	  unsigned char enables, unsigned char format,
+	  xdata unsigned char *buf, unsigned char len)
+{
+  if (count_bits8 (enables) > 1)
+    return 0;		// error, too many enables set
+
+  setup_enables (enables);
+
+  if (format & SPI_FMT_LSB){		// order: LSB
+#if 1
+    return 0;		// error, not implemented
+#else
+    switch (format & SPI_FMR_HDR_MASK){
+    case SPI_FMT_HDR_0:
+      break;
+    case SPI_FMT_HDR_1:
+      write_byte_lsb (header_lo);
+      break;
+    case SPI_FMT_HDR_2:
+      write_byte_lsb (header_lo);
+      write_byte_lsb (header_hi);
+      break;
+    default:
+      return 0;		// error
+    }
+    if (len != 0)
+      read_bytes_lsb (buf, len);
+#endif
+  }
+
+  else {		// order: MSB
+
+    switch (format & SPI_FMT_HDR_MASK){
+    case SPI_FMT_HDR_0:
+      break;
+    case SPI_FMT_HDR_1:
+      write_byte_msb (header_lo);
+      break;
+    case SPI_FMT_HDR_2:
+      write_byte_msb (header_hi);
+      write_byte_msb (header_lo);
+      break;
+    default:
+      return 0;		// error
+    }
+    if (len != 0)
+      read_bytes_msb (buf, len);
+  }
+
+  disable_all ();
+  return 1;		// success
+}
+
+
+// returns non-zero if successful, else 0
+unsigned char
+spi_write (unsigned char header_hi, unsigned char header_lo,
+	   unsigned char enables, unsigned char format,
+	   const xdata unsigned char *buf, unsigned char len)
+{
+  setup_enables (enables);
+
+  if (format & SPI_FMT_LSB){		// order: LSB
+#if 1
+    return 0;		// error, not implemented
+#else
+    switch (format & SPI_FMR_HDR_MASK){
+    case SPI_FMT_HDR_0:
+      break;
+    case SPI_FMT_HDR_1:
+      write_byte_lsb (header_lo);
+      break;
+    case SPI_FMT_HDR_2:
+      write_byte_lsb (header_lo);
+      write_byte_lsb (header_hi);
+      break;
+    default:
+      return 0;		// error
+    }
+    if (len != 0)
+      write_bytes_lsb (buf, len);
+#endif
+  }
+
+  else {		// order: MSB
+
+    switch (format & SPI_FMT_HDR_MASK){
+    case SPI_FMT_HDR_0:
+      break;
+    case SPI_FMT_HDR_1:
+      write_byte_msb (header_lo);
+      break;
+    case SPI_FMT_HDR_2:
+      write_byte_msb (header_hi);
+      write_byte_msb (header_lo);
+      break;
+    default:
+      return 0;		// error
+    }
+    if (len != 0)
+      write_bytes_msb (buf, len);
+  }
+
+  disable_all ();
+  return 1;		// success
+}
+
+// ----------------------------------------------------------------
+
+static void
+write_byte_msb (unsigned char v)
+{
+  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
+  bitS_OUT = v & 0x1;
+  bitS_CLK = 1;
+  bitS_CLK = 0;
+
+  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
+  bitS_OUT = v & 0x1;
+  bitS_CLK = 1;
+  bitS_CLK = 0;
+
+  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
+  bitS_OUT = v & 0x1;
+  bitS_CLK = 1;
+  bitS_CLK = 0;
+
+  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
+  bitS_OUT = v & 0x1;
+  bitS_CLK = 1;
+  bitS_CLK = 0;
+
+  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
+  bitS_OUT = v & 0x1;
+  bitS_CLK = 1;
+  bitS_CLK = 0;
+
+  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
+  bitS_OUT = v & 0x1;
+  bitS_CLK = 1;
+  bitS_CLK = 0;
+
+  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
+  bitS_OUT = v & 0x1;
+  bitS_CLK = 1;
+  bitS_CLK = 0;
+
+  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
+  bitS_OUT = v & 0x1;
+  bitS_CLK = 1;
+  bitS_CLK = 0;
+}
+
+static void
+write_bytes_msb (const xdata unsigned char *buf, unsigned char len)
+{
+  while (len-- != 0){
+    write_byte_msb (*buf++);
+  }
+}
+
+#if 0
+/*
+ * This is incorrectly compiled by SDCC 2.4.0
+ */
+static unsigned char
+read_byte_msb (void)
+{
+  unsigned char v = 0;
+
+  bitS_CLK = 1;
+  v |= bitS_IN;
+  bitS_CLK = 0;
+
+  v = v << 1;
+  bitS_CLK = 1;
+  v |= bitS_IN;
+  bitS_CLK = 0;
+
+  v = v << 1;
+  bitS_CLK = 1;
+  v |= bitS_IN;
+  bitS_CLK = 0;
+
+  v = v << 1;
+  bitS_CLK = 1;
+  v |= bitS_IN;
+  bitS_CLK = 0;
+
+  v = v << 1;
+  bitS_CLK = 1;
+  v |= bitS_IN;
+  bitS_CLK = 0;
+
+  v = v << 1;
+  bitS_CLK = 1;
+  v |= bitS_IN;
+  bitS_CLK = 0;
+
+  v = v << 1;
+  bitS_CLK = 1;
+  v |= bitS_IN;
+  bitS_CLK = 0;
+
+  v = v << 1;
+  bitS_CLK = 1;
+  v |= bitS_IN;
+  bitS_CLK = 0;
+
+  return v;
+}
+#else
+static unsigned char
+read_byte_msb (void) _naked
+{
+  _asm
+	clr	a
+
+	setb	_bitS_CLK
+        mov	c, _bitS_IN
+	rlc	a
+	clr	_bitS_CLK
+
+	setb	_bitS_CLK
+        mov	c, _bitS_IN
+	rlc	a
+	clr	_bitS_CLK
+
+	setb	_bitS_CLK
+        mov	c, _bitS_IN
+	rlc	a
+	clr	_bitS_CLK
+
+	setb	_bitS_CLK
+        mov	c, _bitS_IN
+	rlc	a
+	clr	_bitS_CLK
+
+	setb	_bitS_CLK
+        mov	c, _bitS_IN
+	rlc	a
+	clr	_bitS_CLK
+
+	setb	_bitS_CLK
+        mov	c, _bitS_IN
+	rlc	a
+	clr	_bitS_CLK
+
+	setb	_bitS_CLK
+        mov	c, _bitS_IN
+	rlc	a
+	clr	_bitS_CLK
+
+	setb	_bitS_CLK
+        mov	c, _bitS_IN
+	rlc	a
+	clr	_bitS_CLK
+
+	mov	dpl,a
+	ret
+  _endasm;
+}
+#endif
+
+static void
+read_bytes_msb (xdata unsigned char *buf, unsigned char len)
+{
+  while (len-- != 0){
+    *buf++ = read_byte_msb ();
+  }
+}
+
diff --git a/firmware/fx2/common/spi.h b/firmware/fx2/common/spi.h
new file mode 100644
index 000000000..12bc5e544
--- /dev/null
+++ b/firmware/fx2/common/spi.h
@@ -0,0 +1,43 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef INCLUDED_SPI_H
+#define INCLUDED_SPI_H
+
+#include "usrp_spi_defs.h"
+
+void init_spi (void);		// one time call to init
+
+// returns non-zero if successful, else 0
+unsigned char
+spi_read (unsigned char header_hi, unsigned char header_lo,
+	  unsigned char enables, unsigned char format,
+	  xdata unsigned char *buf, unsigned char len);
+
+// returns non-zero if successful, else 0
+unsigned char
+spi_write (unsigned char header_hi, unsigned char header_lo,
+	   unsigned char enables, unsigned char format,
+	   const xdata unsigned char *buf, unsigned char len);
+
+
+#endif /* INCLUDED_SPI_H */
diff --git a/firmware/fx2/common/syncdelay.h b/firmware/fx2/common/syncdelay.h
new file mode 100644
index 000000000..0af7d099f
--- /dev/null
+++ b/firmware/fx2/common/syncdelay.h
@@ -0,0 +1,65 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef _SYNCDELAY_H_
+#define _SYNCDELAY_H_
+
+/*
+ * Magic delay required between access to certain xdata registers (TRM page 15-106).
+ * For our configuration, 48 MHz FX2 / 48 MHz IFCLK, we need three cycles.  Each
+ * NOP is a single cycle....
+ *
+ * From TRM page 15-105:
+ *
+ * Under certain conditions, some read and write access to the FX2 registers must
+ * be separated by a "synchronization delay".  The delay is necessary only under the
+ * following conditions:
+ *
+ *   - between a write to any register in the 0xE600 - 0xE6FF range and a write to one
+ *     of the registers listed below.
+ *
+ *   - between a write to one of the registers listed below and a read from any register
+ *     in the 0xE600 - 0xE6FF range.
+ *
+ *   Registers which require a synchronization delay:
+ *
+ *	FIFORESET			FIFOPINPOLAR
+ *	INPKTEND			EPxBCH:L
+ *	EPxFIFOPFH:L			EPxAUTOINLENH:L
+ *	EPxFIFOCFG			EPxGPIFFLGSEL
+ *	PINFLAGSAB			PINFLAGSCD
+ *	EPxFIFOIE			EPxFIFOIRQ
+ *	GPIFIE				GPIFIRQ
+ *	UDMACRCH:L			GPIFADRH:L
+ *	GPIFTRIG			EPxGPIFTRIG
+ *	OUTPKTEND			REVCTL
+ *	GPIFTCB3			GPIFTCB2
+ *	GPIFTCB1			GPIFTCB0
+ */
+
+/*
+ * FIXME ensure that the peep hole optimizer isn't screwing us
+ */
+#define	SYNCDELAY	_asm nop; nop; nop; _endasm
+#define	NOP		_asm nop; _endasm
+
+
+#endif /* _SYNCDELAY_H_ */
diff --git a/firmware/fx2/common/timer.c b/firmware/fx2/common/timer.c
new file mode 100644
index 000000000..97e2f7cf9
--- /dev/null
+++ b/firmware/fx2/common/timer.c
@@ -0,0 +1,49 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "timer.h"
+#include "fx2regs.h"
+#include "isr.h"
+
+/*
+ * Arrange to have isr_tick_handler called at 100 Hz.
+ *
+ * The cpu clock is running at 48e6.  The input to the timer
+ * is 48e6 / 12 = 4e6.
+ *
+ * We arrange to have the timer overflow every 40000 clocks == 100 Hz
+ */
+
+#define	RELOAD_VALUE	((unsigned short) -40000)
+
+void 
+hook_timer_tick (unsigned short isr_tick_handler)
+{
+  ET2 = 0;			// disable timer 2 interrupts
+  hook_sv (SV_TIMER_2, isr_tick_handler);
+  
+  RCAP2H = RELOAD_VALUE >> 8;	// setup the auto reload value
+  RCAP2L = RELOAD_VALUE;
+
+  T2CON = 0x04;			// interrupt on overflow; reload; run
+  ET2 = 1;			// enable timer 2 interrupts
+}
diff --git a/firmware/fx2/common/timer.h b/firmware/fx2/common/timer.h
new file mode 100644
index 000000000..3181874d5
--- /dev/null
+++ b/firmware/fx2/common/timer.h
@@ -0,0 +1,35 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _TIMER_H_
+#define _TIMER_H_
+
+/*
+ * Arrange to have isr_tick_handler called at 100 Hz
+ */
+void hook_timer_tick (unsigned short isr_tick_handler);
+
+#define clear_timer_irq()  				\
+	TF2 = 0 	/* clear overflow flag */
+
+
+#endif /* _TIMER_H_ */
diff --git a/firmware/fx2/common/usb_common.c b/firmware/fx2/common/usb_common.c
new file mode 100644
index 000000000..3b0547b2f
--- /dev/null
+++ b/firmware/fx2/common/usb_common.c
@@ -0,0 +1,386 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "usb_common.h"
+#include "fx2regs.h"
+#include "syncdelay.h"
+#include "fx2utils.h"
+#include "isr.h"
+#include "usb_descriptors.h"
+#include "usb_requests.h"
+
+extern xdata char str0[];
+extern xdata char str1[];
+extern xdata char str2[];
+extern xdata char str3[];
+extern xdata char str4[];
+extern xdata char str5[];
+
+
+#define	bRequestType	SETUPDAT[0]
+#define	bRequest	SETUPDAT[1]
+#define	wValueL		SETUPDAT[2]
+#define	wValueH		SETUPDAT[3]
+#define	wIndexL		SETUPDAT[4]
+#define	wIndexH		SETUPDAT[5]
+#define	wLengthL	SETUPDAT[6]
+#define	wLengthH	SETUPDAT[7]
+
+#define MSB(x)	(((unsigned short) x) >> 8)
+#define LSB(x)	(((unsigned short) x) & 0xff)
+
+volatile bit _usb_got_SUDAV;
+
+unsigned char	_usb_config = 0;
+unsigned char	_usb_alt_setting = 0;	// FIXME really 1/interface
+
+xdata unsigned char *current_device_descr;
+xdata unsigned char *current_devqual_descr;
+xdata unsigned char *current_config_descr;
+xdata unsigned char *other_config_descr;
+
+static void
+setup_descriptors (void)
+{
+  if (USBCS & bmHSM){		// high speed mode
+    current_device_descr  = high_speed_device_descr;
+    current_devqual_descr = high_speed_devqual_descr;
+    current_config_descr  = high_speed_config_descr;
+    other_config_descr    = full_speed_config_descr;
+  }
+  else {
+    current_device_descr  = full_speed_device_descr;
+    current_devqual_descr = full_speed_devqual_descr;
+    current_config_descr  = full_speed_config_descr;
+    other_config_descr    = high_speed_config_descr;
+  }
+
+  // whack the type fields
+  // FIXME, may not be required.
+  // current_config_descr[1] = DT_CONFIG;
+  // other_config_descr[1]   = DT_OTHER_SPEED;
+}
+
+static void
+isr_SUDAV (void) interrupt
+{
+  clear_usb_irq ();
+  _usb_got_SUDAV = 1;
+}
+
+static void
+isr_USBRESET (void) interrupt
+{
+  clear_usb_irq ();
+  setup_descriptors ();
+}
+
+static void
+isr_HIGHSPEED (void) interrupt
+{
+  clear_usb_irq ();
+  setup_descriptors ();
+}
+
+void
+usb_install_handlers (void)
+{
+  setup_descriptors ();	    // ensure that they're set before use
+
+  hook_uv (UV_SUDAV,     (unsigned short) isr_SUDAV);
+  hook_uv (UV_USBRESET,  (unsigned short) isr_USBRESET);
+  hook_uv (UV_HIGHSPEED, (unsigned short) isr_HIGHSPEED);
+
+  USBIE = bmSUDAV | bmURES | bmHSGRANT;
+}
+
+// On the FX2 the only plausible endpoints are 0, 1, 2, 4, 6, 8
+// This doesn't check to see that they're enabled
+
+unsigned char
+plausible_endpoint (unsigned char ep)
+{
+  ep &= ~0x80;	// ignore direction bit
+
+  if (ep > 8)
+    return 0;
+
+  if (ep == 1)
+    return 1;
+
+  return (ep & 0x1) == 0;	// must be even
+}
+
+// return pointer to control and status register for endpoint.
+// only called with plausible_endpoints
+
+xdata volatile unsigned char *
+epcs (unsigned char ep)
+{
+  if (ep == 0x01)		// ep1 has different in and out CS regs
+    return EP1OUTCS;
+
+  if (ep == 0x81)
+    return EP1INCS;
+
+  ep &= ~0x80;			// ignore direction bit
+
+  if (ep == 0x00)		// ep0
+    return EP0CS;
+
+  return EP2CS + (ep >> 1);	// 2, 4, 6, 8 are consecutive
+}
+
+void
+usb_handle_setup_packet (void)
+{
+  _usb_got_SUDAV = 0;
+
+  // handle the standard requests...
+
+  switch (bRequestType & bmRT_TYPE_MASK){
+
+  case bmRT_TYPE_CLASS:
+  case bmRT_TYPE_RESERVED:
+    fx2_stall_ep0 ();		// we don't handle these.  indicate error
+    break;
+    
+  case bmRT_TYPE_VENDOR:
+    // call the application code.
+    // If it handles the command it returns non-zero
+
+    if (!app_vendor_cmd ())	
+      fx2_stall_ep0 ();
+    break;
+
+  case bmRT_TYPE_STD:
+    // these are the standard requests...
+
+    if ((bRequestType & bmRT_DIR_MASK) == bmRT_DIR_IN){
+
+      ////////////////////////////////////
+      //    handle the IN requests
+      ////////////////////////////////////
+
+      switch (bRequest){
+
+      case RQ_GET_CONFIG:
+	EP0BUF[0] = _usb_config;	// FIXME app should handle
+	EP0BCH = 0;
+	EP0BCL = 1;
+	break;
+	
+      // --------------------------------
+
+      case RQ_GET_INTERFACE:
+	EP0BUF[0] = _usb_alt_setting;	// FIXME app should handle
+	EP0BCH = 0;
+	EP0BCL = 1;
+	break;
+
+      // --------------------------------
+
+      case RQ_GET_DESCR:
+	switch (wValueH){
+
+	case DT_DEVICE:
+	  SUDPTRH = MSB (current_device_descr);
+	  SUDPTRL = LSB (current_device_descr);
+	  break;
+	  
+	case DT_DEVQUAL:
+	  SUDPTRH = MSB (current_devqual_descr);
+	  SUDPTRL = LSB (current_devqual_descr);
+	  break;
+
+	case DT_CONFIG:
+	  if (0 && wValueL != 1)	// FIXME only a single configuration
+	    fx2_stall_ep0 ();
+	  else {
+	    SUDPTRH = MSB (current_config_descr);
+	    SUDPTRL = LSB (current_config_descr);
+	  }
+	  break;
+
+	case DT_OTHER_SPEED:
+	  if (0 && wValueL != 1)	// FIXME only a single configuration
+	    fx2_stall_ep0 ();
+	  else {
+	    SUDPTRH = MSB (other_config_descr);
+	    SUDPTRL = LSB (other_config_descr);
+	  }
+	  break;
+
+	case DT_STRING:
+	  if (wValueL >= nstring_descriptors)
+	    fx2_stall_ep0 ();
+	  else {
+	    xdata char *p = string_descriptors[wValueL];
+	    SUDPTRH = MSB (p);
+	    SUDPTRL = LSB (p);
+	  }
+	  break;
+
+	default:
+	  fx2_stall_ep0 ();	// invalid request
+	  break;
+	}
+	break;
+	
+      // --------------------------------
+
+      case RQ_GET_STATUS:
+	switch (bRequestType & bmRT_RECIP_MASK){
+	case bmRT_RECIP_DEVICE:
+	  EP0BUF[0] = bmGSDA_SELF_POWERED;	// FIXME app should handle
+	  EP0BUF[1] = 0;
+	  EP0BCH = 0;
+	  EP0BCL = 2;
+	  break;
+
+	case bmRT_RECIP_INTERFACE:
+	  EP0BUF[0] = 0;
+	  EP0BUF[1] = 0;
+	  EP0BCH = 0;
+	  EP0BCL = 2;
+	  break;
+
+	case bmRT_RECIP_ENDPOINT:
+	  if (plausible_endpoint (wIndexL)){
+	    EP0BUF[0] = *epcs (wIndexL) & bmEPSTALL;
+	    EP0BUF[1] = 0;
+	    EP0BCH = 0;
+	    EP0BCL = 2;
+	  }
+	  else
+	    fx2_stall_ep0 ();
+	  break;
+
+	default:
+	  fx2_stall_ep0 ();
+	  break;
+	}
+	break;
+
+      // --------------------------------
+
+      case RQ_SYNCH_FRAME:	// not implemented
+      default:
+	fx2_stall_ep0 ();
+	break;
+      }
+    }
+
+    else {
+
+      ////////////////////////////////////
+      //    handle the OUT requests
+      ////////////////////////////////////
+
+      switch (bRequest){
+
+      case RQ_SET_CONFIG:
+	_usb_config = wValueL;		// FIXME app should handle
+	break;
+
+      case RQ_SET_INTERFACE:
+	_usb_alt_setting = wValueL;	// FIXME app should handle
+	break;
+
+      // --------------------------------
+
+      case RQ_CLEAR_FEATURE:
+	switch (bRequestType & bmRT_RECIP_MASK){
+
+	case bmRT_RECIP_DEVICE:
+	  switch (wValueL){
+	  case FS_DEV_REMOTE_WAKEUP:
+	  default:
+	    fx2_stall_ep0 ();
+	  }
+	  break;
+
+	case bmRT_RECIP_ENDPOINT:
+	  if (wValueL == FS_ENDPOINT_HALT && plausible_endpoint (wIndexL)){
+	    *epcs (wIndexL) &= ~bmEPSTALL;
+	    fx2_reset_data_toggle (wIndexL);
+	  }
+	  else
+	    fx2_stall_ep0 ();
+	  break;
+
+	default:
+	  fx2_stall_ep0 ();
+	  break;
+	}
+	break;
+
+      // --------------------------------
+
+      case RQ_SET_FEATURE:
+	switch (bRequestType & bmRT_RECIP_MASK){
+
+	case bmRT_RECIP_DEVICE:
+	  switch (wValueL){
+	  case FS_TEST_MODE:
+	    // hardware handles this after we complete SETUP phase handshake
+	    break;
+
+	  case FS_DEV_REMOTE_WAKEUP:
+	  default:
+	    fx2_stall_ep0 ();
+	    break;
+	  }
+	}
+	break;
+
+      case bmRT_RECIP_ENDPOINT:
+	switch (wValueL){
+	case FS_ENDPOINT_HALT:
+	  if (plausible_endpoint (wIndexL))
+	    *epcs (wIndexL) |= bmEPSTALL;
+	  else
+	    fx2_stall_ep0 ();
+	  break;
+
+	default:
+	  fx2_stall_ep0 ();
+	  break;
+	}
+	break;
+
+      // --------------------------------
+
+      case RQ_SET_ADDRESS:	// handled by fx2 hardware
+      case RQ_SET_DESCR:	// not implemented
+      default:
+	fx2_stall_ep0 ();
+      }
+
+    }
+    break;
+
+  }	// bmRT_TYPE_MASK
+
+  // ack handshake phase of device request
+  EP0CS |= bmHSNAK;
+}
diff --git a/firmware/fx2/common/usb_common.h b/firmware/fx2/common/usb_common.h
new file mode 100644
index 000000000..ae07b236c
--- /dev/null
+++ b/firmware/fx2/common/usb_common.h
@@ -0,0 +1,37 @@
+/* -*- c -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _USB_COMMON_H_
+#define _USB_COMMON_H_
+
+extern volatile bit _usb_got_SUDAV;
+
+// Provided by user application to handle VENDOR commands.
+// returns non-zero if it handled the command.
+unsigned char app_vendor_cmd (void);
+
+void usb_install_handlers (void);
+void usb_handle_setup_packet (void);
+
+#define usb_setup_packet_avail()	_usb_got_SUDAV
+
+#endif /* _USB_COMMON_H_ */
diff --git a/firmware/fx2/common/usb_descriptors.h b/firmware/fx2/common/usb_descriptors.h
new file mode 100644
index 000000000..0b8c6212f
--- /dev/null
+++ b/firmware/fx2/common/usb_descriptors.h
@@ -0,0 +1,40 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+extern xdata const char high_speed_device_descr[];
+extern xdata const char high_speed_devqual_descr[];
+extern xdata const char high_speed_config_descr[];
+
+extern xdata const char full_speed_device_descr[];
+extern xdata const char full_speed_devqual_descr[];
+extern xdata const char full_speed_config_descr[];
+
+extern xdata unsigned char nstring_descriptors;
+extern xdata char * xdata string_descriptors[];
+
+/*
+ * We patch these locations with info read from the usrp config eeprom
+ */
+extern xdata char usb_desc_hw_rev_binary_patch_location_0[];
+extern xdata char usb_desc_hw_rev_binary_patch_location_1[];
+extern xdata char usb_desc_hw_rev_ascii_patch_location_0[];
+extern xdata char usb_desc_serial_number_ascii[];
diff --git a/firmware/fx2/common/usb_requests.h b/firmware/fx2/common/usb_requests.h
new file mode 100644
index 000000000..7a543abb0
--- /dev/null
+++ b/firmware/fx2/common/usb_requests.h
@@ -0,0 +1,88 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+// Standard USB requests.
+// These are contained in end point 0 setup packets
+
+
+#ifndef _USB_REQUESTS_H_
+#define _USB_REQUESTS_H_
+
+// format of bmRequestType byte
+
+#define	bmRT_DIR_MASK		(0x1 << 7)
+#define	bmRT_DIR_IN		(1 << 7)
+#define	bmRT_DIR_OUT		(0 << 7)
+
+#define	bmRT_TYPE_MASK		(0x3 << 5)
+#define	bmRT_TYPE_STD		(0 << 5)
+#define	bmRT_TYPE_CLASS		(1 << 5)
+#define	bmRT_TYPE_VENDOR	(2 << 5)
+#define	bmRT_TYPE_RESERVED	(3 << 5)
+
+#define	bmRT_RECIP_MASK		(0x1f << 0)
+#define	bmRT_RECIP_DEVICE	(0 << 0)
+#define	bmRT_RECIP_INTERFACE	(1 << 0)
+#define	bmRT_RECIP_ENDPOINT	(2 << 0)
+#define	bmRT_RECIP_OTHER	(3 << 0)
+
+
+// standard request codes (bRequest)
+
+#define	RQ_GET_STATUS		0
+#define	RQ_CLEAR_FEATURE	1
+#define	RQ_RESERVED_2		2
+#define	RQ_SET_FEATURE		3
+#define	RQ_RESERVED_4		4
+#define	RQ_SET_ADDRESS		5
+#define	RQ_GET_DESCR		6
+#define	RQ_SET_DESCR		7
+#define	RQ_GET_CONFIG		8
+#define	RQ_SET_CONFIG		9
+#define	RQ_GET_INTERFACE       10
+#define	RQ_SET_INTERFACE       11
+#define	RQ_SYNCH_FRAME	       12
+
+// standard descriptor types
+
+#define	DT_DEVICE		1
+#define	DT_CONFIG		2
+#define	DT_STRING		3
+#define	DT_INTERFACE		4
+#define	DT_ENDPOINT		5
+#define	DT_DEVQUAL		6
+#define	DT_OTHER_SPEED		7
+#define	DT_INTERFACE_POWER	8
+
+// standard feature selectors
+
+#define	FS_ENDPOINT_HALT	0	// recip: endpoint
+#define	FS_DEV_REMOTE_WAKEUP	1	// recip: device
+#define	FS_TEST_MODE		2	// recip: device
+
+// Get Status device attributes
+
+#define	bmGSDA_SELF_POWERED	0x01
+#define	bmGSDA_REM_WAKEUP	0x02
+
+
+#endif /* _USB_REQUESTS_H_ */
diff --git a/firmware/fx2/common/usrp_commands.h b/firmware/fx2/common/usrp_commands.h
new file mode 100644
index 000000000..2466729b2
--- /dev/null
+++ b/firmware/fx2/common/usrp_commands.h
@@ -0,0 +1,105 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _USRP_COMMANDS_H_
+#define _USRP_COMMANDS_H_
+
+#include <usrp_interfaces.h>
+#include <usrp_spi_defs.h>
+
+#define	MAX_EP0_PKTSIZE		       64	// max size of EP0 packet on FX2
+
+// ----------------------------------------------------------------
+//			Vendor bmRequestType's
+// ----------------------------------------------------------------
+
+#define	VRT_VENDOR_IN			0xC0
+#define	VRT_VENDOR_OUT			0x40
+
+// ----------------------------------------------------------------
+//			  USRP Vendor Requests
+//
+// Note that Cypress reserves [0xA0,0xAF].
+// 0xA0 is the firmware load function.
+// ----------------------------------------------------------------
+
+
+// IN commands
+
+#define	VRQ_GET_STATUS			0x80
+#define		GS_TX_UNDERRUN			0	// wIndexL	// returns 1 byte
+#define		GS_RX_OVERRUN			1	// wIndexL	// returns 1 byte
+
+#define	VRQ_I2C_READ			0x81		// wValueL: i2c address; length: how much to read
+
+#define	VRQ_SPI_READ			0x82		// wValue: optional header bytes
+							// wIndexH:	enables
+							// wIndexL:	format
+							// len: how much to read
+
+#define VRQ_FW_COMPAT 0x83 //low 16 bits
+
+// OUT commands
+
+#define	VRQ_SET_LED			0x01		// wValueL off/on {0,1}; wIndexL: which {0,1}
+
+#define	VRQ_FPGA_LOAD			0x02
+#  define	FL_BEGIN			0	// wIndexL: begin fpga programming cycle.  stalls if trouble.
+#  define	FL_XFER				1	// wIndexL: xfer up to 64 bytes of data
+#  define	FL_END				2	// wIndexL: end programming cycle, check for success.
+							//          stalls endpoint if trouble.
+
+#define	VRQ_FPGA_WRITE_REG		0x03		// wIndexL: regno; data: 32-bit regval MSB first
+#define	VRQ_FPGA_SET_RESET		0x04		// wValueL: {0,1}
+#define	VRQ_FPGA_SET_TX_ENABLE		0x05		// wValueL: {0,1}
+#define	VRQ_FPGA_SET_RX_ENABLE		0x06		// wValueL: {0,1}
+// see below VRQ_FPGA_SET_{TX,RX}_RESET
+
+#define	VRQ_SET_SLEEP_BITS		0x07		// wValueH: mask; wValueL: bits.  set bits given by mask to bits
+
+#  define	SLEEP_ADC0			0x01
+#  define	SLEEP_ADC1			0x02
+#  define	SLEEP_DAC0			0x04
+#  define	SLEEP_DAC1			0x08
+
+#define	VRQ_I2C_WRITE			0x08		// wValueL: i2c address; data: data
+
+#define	VRQ_SPI_WRITE			0x09		// wValue: optional header bytes
+							// wIndexH:	enables
+							// wIndexL:	format
+							// len: how much to write
+
+#define	VRQ_FPGA_SET_TX_RESET		0x0a		// wValueL: {0, 1}
+#define	VRQ_FPGA_SET_RX_RESET		0x0b		// wValueL: {0, 1}
+
+#define VRQ_RESET_GPIF			0x0c
+#define VRQ_ENABLE_GPIF			0x0d
+#define VRQ_CLEAR_FPGA_FIFO     0x0e
+
+
+// -------------------------------------------------------------------
+// we store the hashes at fixed addresses in the FX2 internal memory
+
+#define	  USRP_HASH_SLOT_0_ADDR			0xe1e0
+#define	  USRP_HASH_SLOT_1_ADDR			0xe1f0
+
+
+
+#endif /* _USRP_COMMANDS_H_ */
diff --git a/firmware/fx2/common/usrp_common.h b/firmware/fx2/common/usrp_common.h
new file mode 100644
index 000000000..fd203927f
--- /dev/null
+++ b/firmware/fx2/common/usrp_common.h
@@ -0,0 +1,77 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2006 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/*
+ * common defines and prototypes for USRP
+ *
+ * In comments below "TRM" refers to the EZ-USB FX2 Technical Reference Manual
+ */
+
+#ifndef _USRPCOMMON_H_
+#define _USRPCOMMON_H_
+
+#include "usrp_config.h"
+#include "usrp_regs.h"
+#include "syncdelay.h"
+
+/*
+ * From TRM page 15-105:
+ *
+ * Under certain conditions, some read and write access to the FX2
+ * registers must be separated by a "synchronization delay".  The
+ * delay is necessary only under the following conditions:
+ *
+ *   - between a write to any register in the 0xE600 - 0xE6FF range 
+ *     and a write to one of the registers listed below.
+ *
+ *   - between a write to one of the registers listed below and a read 
+ *     from any register in the 0xE600 - 0xE6FF range.
+ *
+ *   Registers which require a synchronization delay:
+ *
+ *	FIFORESET			FIFOPINPOLAR
+ *	INPKTEND			EPxBCH:L
+ *	EPxFIFOPFH:L			EPxAUTOINLENH:L
+ *	EPxFIFOCFG			EPxGPIFFLGSEL
+ *	PINFLAGSAB			PINFLAGSCD
+ *	EPxFIFOIE			EPxFIFOIRQ
+ *	GPIFIE				GPIFIRQ
+ *	UDMACRCH:L			GPIFADRH:L
+ *	GPIFTRIG			EPxGPIFTRIG
+ *	OUTPKTEND			REVCTL
+ *	GPIFTCB3			GPIFTCB2
+ *	GPIFTCB1			GPIFTCB0
+ */
+
+#define	TRUE		1
+#define	FALSE		0
+
+
+void init_usrp (void);
+void init_gpif (void);
+
+void set_led_0 (unsigned char on);
+void set_led_1 (unsigned char on);
+void toggle_led_0 (void);
+void toggle_led_1 (void);
+
+#define la_trace(v)
+
+#endif /* _USRPCOMMON_H_ */
diff --git a/firmware/fx2/common/usrp_config.h b/firmware/fx2/common/usrp_config.h
new file mode 100644
index 000000000..e77f8e4c5
--- /dev/null
+++ b/firmware/fx2/common/usrp_config.h
@@ -0,0 +1,44 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/*
+ * configuration stuff for debugging
+ */
+
+/*
+ * Define to 0 for normal use of port A, i.e., FPGA control bus.
+ * Define to 1 to write trace to port A for scoping with logic analyzer.
+ */
+#define	UC_TRACE_USING_PORT_A			0
+
+
+/*
+ * Define to 0 for normal use of low 3 bits of port E, i.e., A/D, D/A SLEEP bits.
+ * Define to 1 to enable by default driving the GPIF state to the
+ * low three bits of port E.
+ */
+#define UC_START_WITH_GSTATE_OUTPUT_ENABLED	0
+
+
+/*
+ * Define to 1 for normal use (the board really has an FPGA on it).
+ * Define to 0 for debug use on board without FPGA.
+ */
+#define UC_BOARD_HAS_FPGA			1
diff --git a/firmware/fx2/common/usrp_globals.h b/firmware/fx2/common/usrp_globals.h
new file mode 100644
index 000000000..445e9e6b4
--- /dev/null
+++ b/firmware/fx2/common/usrp_globals.h
@@ -0,0 +1,32 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef _USRP_GLOBALS_H_
+#define _USRP_GLOBALS_H_
+
+extern unsigned char g_tx_enable;
+extern unsigned char g_rx_enable;
+extern unsigned char g_fpga_reset;
+extern unsigned char g_rx_overrun;
+extern unsigned char g_tx_underrun;
+
+
+#endif /* _USRP_GLOBALS_H_ */
diff --git a/firmware/fx2/common/usrp_i2c_addr.h b/firmware/fx2/common/usrp_i2c_addr.h
new file mode 100644
index 000000000..0a4f3ea59
--- /dev/null
+++ b/firmware/fx2/common/usrp_i2c_addr.h
@@ -0,0 +1,78 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef INCLUDED_USRP_I2C_ADDR_H
+#define INCLUDED_USRP_I2C_ADDR_H
+
+// I2C addresses
+
+#define I2C_DEV_EEPROM	0x50		// 24LC02[45]:  7-bits 1010xxx
+
+#define	I2C_ADDR_BOOT	(I2C_DEV_EEPROM	| 0x0)
+#define	I2C_ADDR_TX_A	(I2C_DEV_EEPROM | 0x4)
+#define	I2C_ADDR_RX_A	(I2C_DEV_EEPROM | 0x5)
+#define	I2C_ADDR_TX_B	(I2C_DEV_EEPROM	| 0x6)
+#define	I2C_ADDR_RX_B	(I2C_DEV_EEPROM | 0x7)
+
+
+// format of FX2 BOOT EEPROM
+//	00: 0xC0	code for ``Read IDs from EEPROM''
+//	01: 0xFE	USB Vendor ID (LSB)
+//	02: 0xFF	USB Vendor ID (MSB)
+//	03: 0x02	USB Product ID (LSB)
+//	04: 0x00	USB Product ID (MSB)
+//	05: 0x01	USB Device ID (LSB)	// rev1
+//	06: 0x00	USB Device ID (MSB)	// 0 = unconfig'd (no firmware)
+//	07: 0x00	option byte
+
+
+// format of daughterboard EEPROM
+//	00: 0xDB	code for ``I'm a daughterboard''
+//	01:   ..	Daughterboard ID (LSB)
+//	02:   ..	Daughterboard ID (MSB)
+//	03:   ..	io bits  7-0 direction (bit set if it's an output from m'board)
+//	04:   ..	io bits 15-8 direction (bit set if it's an output from m'board)
+//	05:   ..	ADC0 DC offset correction (LSB)
+//	06:   ..	ADC0 DC offset correction (MSB)
+//	07:   ..	ADC1 DC offset correction (LSB)
+//	08:   ..	ADC1 DC offset correction (MSB)
+// 	...
+//	1f:   ..	negative of the sum of bytes [0x00, 0x1e]
+
+#define	DB_EEPROM_MAGIC		0x00
+#define	  DB_EEPROM_MAGIC_VALUE			0xDB
+#define	DB_EEPROM_ID_LSB		0x01
+#define	DB_EEPROM_ID_MSB		0x02
+#define	DB_EEPROM_OE_LSB		0x03
+#define	DB_EEPROM_OE_MSB		0x04
+#define	DB_EEPROM_OFFSET_0_LSB		0x05	// offset correction for ADC or DAC 0
+#define	DB_EEPROM_OFFSET_0_MSB		0x06
+#define	DB_EEPROM_OFFSET_1_LSB		0x07	// offset correction for ADC or DAC 1
+#define	DB_EEPROM_OFFSET_1_MSB		0x08
+#define	DB_EEPROM_CHKSUM		0x1f
+
+#define	DB_EEPROM_CLEN			0x20	// length of common portion of eeprom
+
+#define	DB_EEPROM_CUSTOM_BASE		DB_EEPROM_CLEN	// first avail offset for
+							//   daughterboard specific use
+
+#endif /* INCLUDED_USRP_I2C_ADDR_H */
+
diff --git a/firmware/fx2/common/usrp_ids.h b/firmware/fx2/common/usrp_ids.h
new file mode 100644
index 000000000..ffeb47f3c
--- /dev/null
+++ b/firmware/fx2/common/usrp_ids.h
@@ -0,0 +1,68 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003,2006,2007 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+/*
+ * USB Vendor and Product IDs that we use
+ *
+ * (keep in sync with usb_descriptors.a51)
+ */
+
+#ifndef _USRP_IDS_H_
+#define _USRP_IDS_H_
+
+#define	USB_VID_CYPRESS			0x04b4
+#define	USB_PID_CYPRESS_FX2		0x8613
+
+
+#define	USB_VID_FSF			0xfffe	  // Free Software Folks
+#define	USB_PID_FSF_EXP_0		0x0000	  // Experimental 0
+#define	USB_PID_FSF_EXP_1		0x0001	  // Experimental 1
+#define	USB_PID_FSF_USRP		0x0002	  // Universal Software Radio Peripheral
+#define	USB_PID_FSF_USRP1P	0x0003	  // USRP1P
+#define	USB_PID_FSF_SSRP		0x0004	  // Simple Software Radio Peripheral
+#define	USB_PID_FSF_SSRP_reserved	0x0005	  // Simple Software Radio Peripheral
+#define USB_PID_FSF_HPSDR               0x0006    // High Performance Software Defined Radio (Internal Boot)
+#define USB_PID_FSF_HPSDR_HA    	0x0007    // High Performance Software Defined Radio (Host Assisted Boot)
+#define USB_PID_FSF_QS1R	    	0x0008    // QS1R HF receiver
+#define USB_PID_FSF_EZDOP	    	0x0009    // ezdop <jcorgan@aeinet.com>
+#define USB_PID_FSF_BDALE_0		0x000a	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_BDALE_1		0x000b	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_BDALE_2		0x000c	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_BDALE_3		0x000d	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_BDALE_4		0x000e	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_BDALE_5		0x000f	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_BDALE_6		0x0010	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_BDALE_7		0x0011	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_BDALE_8		0x0012	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_BDALE_9		0x0013	  // Bdale Garbee <bdale@gag.com>
+#define USB_PID_FSF_HPSDR_HERMES	0x0014	  // HPSDR Hermes
+#define USB_PID_FSF_THINKRF		0x0015	  // Catalin Patulea <catalin.patulea@thinkrf.com>
+#define USB_PID_FSF_MSA			0x0016	  // Hans de Bok <hdbok@dionaea.demon.nl> Scotty's Modular Spectrum Analyzer
+
+#define USB_PID_FSF_LBNL_UXO            0x0018    // http://recycle.lbl.gov/~ldoolitt/uxo/
+
+
+#define	USB_DID_USRP_0			0x0000	  // unconfigured rev 0 USRP
+#define	USB_DID_USRP_1			0x0001	  // unconfigured rev 1 USRP
+#define	USB_DID_USRP_2			0x0002	  // unconfigured rev 2 USRP
+
+#endif /* _USRP_IDS_H_ */
diff --git a/firmware/fx2/common/usrp_interfaces.h b/firmware/fx2/common/usrp_interfaces.h
new file mode 100644
index 000000000..8666e0490
--- /dev/null
+++ b/firmware/fx2/common/usrp_interfaces.h
@@ -0,0 +1,47 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _USRP_INTERFACES_H_
+#define _USRP_INTERFACES_H_
+
+/*
+ * We've now split the USRP into 3 separate interfaces.
+ *
+ * Interface 0 contains only ep0 and is used for command and status.
+ * Interface 1 is the Tx path and it uses ep2 OUT BULK.
+ * Interface 2 is the Rx path and it uses ep6 IN BULK.
+ */
+ 
+#define	USRP_CMD_INTERFACE		0
+#define	USRP_CMD_ALTINTERFACE		0
+#define	USRP_CMD_ENDPOINT		0
+
+#define	USRP_TX_INTERFACE		1
+#define	USRP_TX_ALTINTERFACE		0
+#define	USRP_TX_ENDPOINT		2	// streaming data from host to FPGA
+
+#define	USRP_RX_INTERFACE		2
+#define	USRP_RX_ALTINTERFACE		0
+#define	USRP_RX_ENDPOINT		6	// streaming data from FPGA to host
+
+
+#endif /* _USRP_INTERFACES_H_ */
diff --git a/firmware/fx2/common/usrp_spi_defs.h b/firmware/fx2/common/usrp_spi_defs.h
new file mode 100644
index 000000000..963463ef2
--- /dev/null
+++ b/firmware/fx2/common/usrp_spi_defs.h
@@ -0,0 +1,86 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef INCLUDED_USRP_SPI_DEFS_H
+#define INCLUDED_USRP_SPI_DEFS_H
+
+/*
+ * defines for the VRQ_SPI_READ and VRQ_SPI_WRITE commands
+ *
+ * SPI == "Serial Port Interface".  SPI is a 3 wire bus plus a
+ * separate enable for each peripheral.  The common lines are SCLK,
+ * SDI and SDO.  The FX2 always drives SCLK and SDI, the clock and
+ * data lines from the FX2 to the peripheral.  When enabled, a
+ * peripheral may drive SDO, the data line from the peripheral to the
+ * FX2.
+ *
+ * The SPI_READ and SPI_WRITE commands are formatted identically.
+ * Each specifies which peripherals to enable, whether the bits should
+ * be transmistted Most Significant Bit first or Least Significant Bit
+ * first, the number of bytes in the optional header, and the number
+ * of bytes to read or write in the body.
+ *
+ * The body is limited to 64 bytes.  The optional header may contain
+ * 0, 1 or 2 bytes.  For an SPI_WRITE, the header bytes are
+ * transmitted to the peripheral followed by the the body bytes.  For
+ * an SPI_READ, the header bytes are transmitted to the peripheral,
+ * then len bytes are read back from the peripheral.
+ */
+
+/*
+ * SPI_FMT_* goes in wIndexL
+ */
+#define SPI_FMT_xSB_MASK	(1 << 7)
+#  define	SPI_FMT_LSB	(1 << 7)	// least signficant bit first
+#  define	SPI_FMT_MSB	(0 << 7)	// most significant bit first
+#define	SPI_FMT_HDR_MASK	(3 << 5)
+#  define	SPI_FMT_HDR_0	(0 << 5)	// 0 header bytes
+#  define	SPI_FMT_HDR_1	(1 << 5)	// 1 header byte
+#  define	SPI_FMT_HDR_2	(2 << 5)	// 2 header bytes
+
+/*
+ * SPI_ENABLE_*  goes in wIndexH
+ *
+ * For the software interface, the enables are active high.
+ * For reads, it's an error to have more than one enable set.
+ *
+ * [FWIW, the hardware implements them as active low.  Don't change the
+ * definitions of these.  They are related to usrp_rev1_regs.h]
+ */
+#define	SPI_ENABLE_FPGA		0x01	// select FPGA
+#define	SPI_ENABLE_CODEC_A	0x02	// select AD9862 A
+#define	SPI_ENABLE_CODEC_B	0x04	// select AD9862 B
+#define	SPI_ENABLE_reserved	0x08
+#define	SPI_ENABLE_TX_A		0x10	// select d'board TX A
+#define	SPI_ENABLE_RX_A		0x20	// select d'board RX A
+#define	SPI_ENABLE_TX_B		0x40	// select d'board TX B
+#define	SPI_ENABLE_RX_B		0x80	// select d'board RX B
+
+/*
+ * If there's one header byte, it goes in wValueL.
+ *
+ * If there are two header bytes, they go in wValueH | wValueL.
+ * The transmit order of the bytes (and bits within them) is 
+ * determined by SPI_FMT_*SB
+ */
+ 
+#endif /* INCLUDED_USRP_SPI_DEFS_H */
diff --git a/firmware/fx2/common/vectors.a51 b/firmware/fx2/common/vectors.a51
new file mode 100644
index 000000000..4eec9fdbf
--- /dev/null
+++ b/firmware/fx2/common/vectors.a51
@@ -0,0 +1,179 @@
+;;; -*- asm -*-
+;;;
+;;; Copyright 2003 Free Software Foundation, Inc.
+;;; 
+;;; This file is part of GNU Radio
+;;; 
+;;; GNU Radio is free software; you can redistribute it and/or modify
+;;; it under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3, or (at your option)
+;;; any later version.
+;;; 
+;;; GNU Radio is distributed in the hope that it will be useful,
+;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;; 
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Radio; see the file COPYING.  If not, write to
+;;; the Free Software Foundation, Inc., 51 Franklin Street,
+;;; Boston, MA 02110-1301, USA.
+;;; 
+
+;;; Interrupt vectors.
+
+;;; N.B. This object module must come first in the list of modules
+
+	.module vectors
+
+;;; ----------------------------------------------------------------
+;;;		  standard FX2 interrupt vectors
+;;; ----------------------------------------------------------------
+	.area CSEG (CODE)
+	.area GSINIT (CODE)
+	.area CSEG (CODE)
+__standard_interrupt_vector::
+__reset_vector::
+	ljmp	s_GSINIT
+	
+	;; 13 8-byte entries.  We point them all at __isr_nop
+	ljmp	__isr_nop	; 3 bytes
+	.ds	5		; + 5 = 8 bytes for vector slot
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+	ljmp	__isr_nop
+	.ds	5
+
+__isr_nop::
+	reti
+
+;;; ----------------------------------------------------------------
+;;; the FIFO/GPIF autovector.  14 4-byte entries.
+;;; must start on a 128 byte boundary.
+;;; ----------------------------------------------------------------
+	
+	. = __reset_vector + 0x0080
+		
+__fifo_gpif_autovector::
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+	ljmp	__isr_nop
+	nop	
+
+	
+;;; ----------------------------------------------------------------
+;;; the USB autovector.  32 4-byte entries.
+;;; must start on a 256 byte boundary.
+;;; ----------------------------------------------------------------
+
+	. = __reset_vector + 0x0100
+	
+__usb_autovector::
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
+	ljmp	__isr_nop
+	nop
diff --git a/firmware/fx2/config/CMakeASM_SDCCInformation.cmake b/firmware/fx2/config/CMakeASM_SDCCInformation.cmake
new file mode 100644
index 000000000..d9f28b8d3
--- /dev/null
+++ b/firmware/fx2/config/CMakeASM_SDCCInformation.cmake
@@ -0,0 +1,28 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# support for the SDCC assembler, asx8051
+SET( ASM_DIALECT "_SDCC" )
+SET( CMAKE_ASM${ASM_DIALECT}_SOURCE_FILE_EXTENSIONS a51 )
+
+#i don't want to talk about it. i had such high hopes for CMake.
+SET( CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <FLAGS> -plosgff <SOURCE>" "${CMAKE_COMMAND} -DFILE=<OBJECT> -DSOURCE=<SOURCE> -P ${CMAKE_SOURCE_DIR}/config/Rename.cmake")
+
+INCLUDE( CMakeASMInformation )
+SET( CMAKE_ASM${ASM_DIALECT}_OUTPUT_EXTENSION ".rel" ) #must go here because the include appears to overwrite it, although it shouldn't
+# for future use
+SET( ASM_DIALECT )
diff --git a/firmware/fx2/config/CMakeDetermineASM_SDCCCompiler.cmake b/firmware/fx2/config/CMakeDetermineASM_SDCCCompiler.cmake
new file mode 100644
index 000000000..ab301b9f3
--- /dev/null
+++ b/firmware/fx2/config/CMakeDetermineASM_SDCCCompiler.cmake
@@ -0,0 +1,22 @@
+
+#=============================================================================
+# Copyright 2008-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distributed this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Find the MS assembler (masm or masm64)
+
+SET(ASM_DIALECT "_SDCC")
+
+SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_INIT asx8051)
+
+INCLUDE(CMakeDetermineASMCompiler)
+SET(ASM_DIALECT)
diff --git a/firmware/fx2/config/CMakeTestASM_SDCCCompiler.cmake b/firmware/fx2/config/CMakeTestASM_SDCCCompiler.cmake
new file mode 100644
index 000000000..1cb71cd9d
--- /dev/null
+++ b/firmware/fx2/config/CMakeTestASM_SDCCCompiler.cmake
@@ -0,0 +1,23 @@
+
+#=============================================================================
+# Copyright 2007-2009 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distributed this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This file is used by EnableLanguage in cmGlobalGenerator to
+# determine that that selected ASM-ATT compiler can actually compile
+# and link the most basic of programs.   If not, a fatal error
+# is set and cmake stops processing commands and will not generate
+# any makefiles or projects.
+
+SET(ASM_DIALECT "_SDCC")
+INCLUDE(CMakeTestASMCompiler)
+SET(ASM_DIALECT)
diff --git a/firmware/fx2/config/Rename.cmake b/firmware/fx2/config/Rename.cmake
new file mode 100644
index 000000000..36cd33527
--- /dev/null
+++ b/firmware/fx2/config/Rename.cmake
@@ -0,0 +1,37 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+#go and fetch the real compiler outputs because the compiler does things wrong and CMake is too damn brittle to cope
+#just incidentally, why the heck does aslink look for a .lst input? why should it care?
+
+#first the .rel
+get_filename_component(source_noext ${SOURCE} NAME_WE)
+get_filename_component(source_path ${SOURCE} PATH)
+set(compiled_ext .rel)
+list(APPEND compiled_filepath ${source_path}/${source_noext}${compiled_ext})
+#EXECUTE_PROCESS(COMMAND echo Moving ${compiled_filepath} to ${FILE})
+EXECUTE_PROCESS(COMMAND ${CMAKE_COMMAND} -E rename ${compiled_filepath} ${FILE})
+
+#now do the same for the .lst
+set(compiled_lst .lst)
+get_filename_component(src_ext ${SOURCE} EXT)
+get_filename_component(lst_noext ${FILE} NAME_WE)
+get_filename_component(lst_path ${FILE} PATH)
+list(APPEND compiled_lstpath ${source_path}/${source_noext}${compiled_lst})
+list(APPEND compiled_outputlstpath ${lst_path}/${lst_noext}${src_ext}${compiled_lst})
+#EXECUTE_PROCESS(COMMAND echo Moving ${compiled_lstpath} to ${compiled_outputlstpath})
+EXECUTE_PROCESS(COMMAND ${CMAKE_COMMAND} -E rename ${compiled_lstpath} ${compiled_outputlstpath})
diff --git a/firmware/fx2/config/Toolchain-sdcc.cmake b/firmware/fx2/config/Toolchain-sdcc.cmake
new file mode 100644
index 000000000..733d8f563
--- /dev/null
+++ b/firmware/fx2/config/Toolchain-sdcc.cmake
@@ -0,0 +1,32 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# the name of the target operating system
+SET(CMAKE_SYSTEM_NAME Generic)
+# which compilers to use for C and C++
+SET(CMAKE_C_COMPILER sdcc)
+
+# here is where the target environment is located
+SET(CMAKE_FIND_ROOT_PATH  /usr/bin /usr/share/sdcc)
+
+# adjust the default behaviour of the FIND_XXX() commands:
+# search headers and libraries in the target environment, search 
+# programs in the host environment
+set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
+set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
+set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
+
diff --git a/firmware/fx2/usrp1/CMakeLists.txt b/firmware/fx2/usrp1/CMakeLists.txt
new file mode 100644
index 000000000..6607bc7f2
--- /dev/null
+++ b/firmware/fx2/usrp1/CMakeLists.txt
@@ -0,0 +1,84 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+include_directories(${CMAKE_SOURCE_DIR}/common)
+
+#for usrp_common.h and the regs files...
+set(CMAKE_INCLUDE_CURRENT_DIR ON)
+
+#now make a lib to link against
+set(libusrp1_sources 
+    ${CMAKE_SOURCE_DIR}/common/delay.c
+    ${CMAKE_SOURCE_DIR}/common/fx2utils.c
+    ${CMAKE_SOURCE_DIR}/common/i2c.c
+    ${CMAKE_SOURCE_DIR}/common/init_gpif.c
+    ${CMAKE_SOURCE_DIR}/common/isr.c
+    ${CMAKE_SOURCE_DIR}/common/timer.c
+    ${CMAKE_SOURCE_DIR}/common/usb_common.c
+#    ${CMAKE_SOURCE_DIR}/common/spi.c
+#    ${CMAKE_SOURCE_DIR}/common/vectors.a51
+)
+
+#file(GLOB libusrp1_c_sources ${CMAKE_SOURCE_DIR}/common/*.c)
+#file(GLOB libusrp1_a51_sources ${CMAKE_SOURCE_DIR}/common/*.a51)
+#list(APPEND libusrp1_sources ${libusrp1_c_sources} ${libusrp1_a51_sources})
+
+add_library(libusrp1 STATIC ${libusrp1_sources})
+
+# edit-gpif hacks up gpif.c for our purposes. no major surgery, just moving stuff around.
+set(GPIF_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/gpif.c)
+set(GPIF_SOURCE_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif.c)
+set(GPIF_HEADER_OUTPUT ${CMAKE_CURRENT_SOURCE_DIR}/usrp_gpif_inline.h)
+
+add_custom_command(
+        OUTPUT ${GPIF_SOURCE_OUTPUT}
+        DEPENDS ${EDIT_GPIF_USRP1}
+        COMMAND ${PYTHON_EXECUTABLE} ${EDIT_GPIF_USRP1} ${GPIF_SOURCE} ${GPIF_SOURCE_OUTPUT} ${GPIF_HEADER_OUTPUT}
+        COMMENT "Generating ${GPIF_SOURCE_OUTPUT}"
+)
+
+#file(GLOB usrp1_sources *.c)
+set(usrp1_sources 
+    ${CMAKE_SOURCE_DIR}/common/vectors.a51
+    board_specific.c 
+    eeprom_io.c 
+    fpga_load.c 
+    fpga_rev2.c 
+    usrp_common.c 
+    usrp_gpif.c 
+    usrp_main.c 
+    usb_descriptors.a51 
+    ${CMAKE_SOURCE_DIR}/common/spi.c
+    ${CMAKE_SOURCE_DIR}/common/_startup.a51
+)
+add_executable(usrp1_fw ${usrp1_sources})
+target_link_libraries(usrp1_fw libusrp1)
+
+set(eeprom1_sources
+    ${CMAKE_SOURCE_DIR}/common/eeprom_boot.a51
+    ${CMAKE_SOURCE_DIR}/common/eeprom_init.c
+    ${CMAKE_SOURCE_DIR}/common/_startup.a51
+)
+
+add_custom_target(usrp1_eeprom ALL
+    DEPENDS usrp1_boot
+    COMMAND objcopy -I ihex -O binary usrp1_boot.ihx usrp1_boot.bin
+    COMMAND ${PYTHON_EXECUTABLE} ${BUILD_EEPROM} -r1 usrp1_boot.bin usrp1_eeprom.bin
+)
+
+add_executable(usrp1_boot ${eeprom1_sources})
+target_link_libraries(usrp1_boot libusrp1)
diff --git a/firmware/fx2/usrp1/board_specific.c b/firmware/fx2/usrp1/board_specific.c
new file mode 100644
index 000000000..ef0081d84
--- /dev/null
+++ b/firmware/fx2/usrp1/board_specific.c
@@ -0,0 +1,113 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "usrp_common.h"
+#include "spi.h"
+
+void
+set_led_0 (unsigned char on)
+{
+  if (!on)			// active low
+    USRP_PC |= bmPC_LED0;
+  else
+    USRP_PC &= ~bmPC_LED0;
+}
+
+void 
+set_led_1 (unsigned char on)
+{
+  if (!on)			// active low
+    USRP_PC |= bmPC_LED1;
+  else
+    USRP_PC &= ~bmPC_LED1;
+}
+
+void
+toggle_led_0 (void)
+{
+  USRP_PC ^= bmPC_LED0;
+}
+
+void
+toggle_led_1 (void)
+{
+  USRP_PC ^= bmPC_LED1;
+}
+
+void
+la_trace_init (void)
+{
+}
+
+void
+set_sleep_bits (unsigned char bits, unsigned char mask)
+{
+  // NOP on usrp1
+}
+
+static xdata unsigned char xbuf[1];
+
+void
+write_9862 (unsigned char which, unsigned char regno, unsigned char value)
+{
+  xbuf[0] = value;
+  
+  spi_write (0, regno & 0x3f,
+	     which == 0 ? SPI_ENABLE_CODEC_A : SPI_ENABLE_CODEC_B,
+	     SPI_FMT_MSB | SPI_FMT_HDR_1,
+	     xbuf, 1);
+}
+
+void
+write_both_9862s (unsigned char regno, unsigned char value)
+{
+  xbuf[0] = value;
+  
+  spi_write (0, regno & 0x3f,
+	     SPI_ENABLE_CODEC_A | SPI_ENABLE_CODEC_B,
+	     SPI_FMT_MSB | SPI_FMT_HDR_1,
+	     xbuf, 1);
+}
+
+#define REG_RX_PWR_DN		 1
+#define	REG_TX_PWR_DN		 8
+#define	REG_TX_MODULATOR	20
+
+static void
+power_down_9862s (void)
+{
+  write_both_9862s (REG_RX_PWR_DN,    0x01);
+  write_both_9862s (REG_TX_PWR_DN,    0x0f);	// pwr dn digital and analog_both
+  write_both_9862s (REG_TX_MODULATOR, 0x00);	// coarse & fine modulators disabled
+}
+
+void
+init_board (void)
+{
+  la_trace_init ();
+  init_spi ();
+
+  USRP_PC &= ~bmPC_nRESET;	// active low reset
+  USRP_PC |= bmPC_nRESET;
+
+  power_down_9862s ();
+}
diff --git a/firmware/fx2/usrp1/eeprom_io.c b/firmware/fx2/usrp1/eeprom_io.c
new file mode 100644
index 000000000..9eeb53636
--- /dev/null
+++ b/firmware/fx2/usrp1/eeprom_io.c
@@ -0,0 +1,65 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "eeprom_io.h"
+#include "i2c.h"
+#include "delay.h"
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
+	     xdata unsigned char *buf, unsigned char len)
+{
+  // We setup a random read by first doing a "zero byte write".
+  // Writes carry an address.  Reads use an implicit address.
+
+  static xdata unsigned char cmd[1];
+  cmd[0] = eeprom_offset;
+  if (!i2c_write(i2c_addr, cmd, 1))
+    return 0;
+
+  return i2c_read(i2c_addr, buf, len);
+}
+
+
+#if 0
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
+	      const xdata unsigned char *buf, unsigned char len)
+{
+  static xdata unsigned char cmd[2];
+  unsigned char ok;
+
+  while (len-- > 0){
+    cmd[0] = eeprom_offset++;
+    cmd[1] = *buf++;
+    ok = i2c_write(i2c_addr, cmd, 2);
+    mdelay(10);		// delay 10ms worst case write time
+    if (!ok)
+      return 0;
+  }
+  return 1;
+}
+
+#endif
diff --git a/firmware/fx2/usrp1/eeprom_io.h b/firmware/fx2/usrp1/eeprom_io.h
new file mode 100644
index 000000000..558017b12
--- /dev/null
+++ b/firmware/fx2/usrp1/eeprom_io.h
@@ -0,0 +1,38 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef INCLUDED_EEPROM_IO_H
+#define INCLUDED_EEPROM_IO_H
+
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
+	     xdata unsigned char *buf, unsigned char len);
+
+// returns non-zero if successful, else 0
+unsigned char
+eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
+	      const xdata unsigned char *buf, unsigned char len);
+
+
+#endif /* INCLUDED_EEPROM_IO_H */
diff --git a/firmware/fx2/usrp1/fpga_load.c b/firmware/fx2/usrp1/fpga_load.c
new file mode 100644
index 000000000..c3ae9e707
--- /dev/null
+++ b/firmware/fx2/usrp1/fpga_load.c
@@ -0,0 +1,193 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "fpga_load.h"
+#include "delay.h"
+
+/*
+ * setup altera FPGA serial load (PS).
+ *
+ * On entry:
+ *	don't care
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_begin (void)
+{
+  USRP_ALTERA_CONFIG &= ~bmALTERA_BITS;		// clear all bits (NCONFIG low)
+  udelay (40);					// wait 40 us
+  USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG;	// set NCONFIG high
+
+  if (UC_BOARD_HAS_FPGA){
+    // FIXME should really cap this loop with a counter so we
+    //   don't hang forever on a hardware failure.
+    while ((USRP_ALTERA_CONFIG & bmALTERA_NSTATUS) == 0) // wait for NSTATUS to go high
+      ;
+  }
+
+  // ready to xfer now
+
+  return 1;
+}
+
+/*
+ * clock out the low bit of bits.
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+
+
+#if 0
+
+static void
+clock_out_config_byte (unsigned char bits)
+{
+  unsigned char i;
+
+  // clock out configuration byte, least significant bit first
+
+  for (i = 0; i < 8; i++){
+
+    USRP_ALTERA_CONFIG = ((USRP_ALTERA_CONFIG & ~bmALTERA_DATA0) | ((bits & 1) ? bmALTERA_DATA0 : 0));
+    USRP_ALTERA_CONFIG |= bmALTERA_DCLK;		/* set DCLK to 1 */
+    USRP_ALTERA_CONFIG &= ~bmALTERA_DCLK;		/* set DCLK to 0 */
+
+    bits = bits >> 1;
+  }
+}
+	
+#else
+
+static void 
+clock_out_config_byte (unsigned char bits) _naked
+{
+    _asm
+	mov	a, dpl
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	rrc	a
+	mov	_bitALTERA_DATA0,c
+	setb	_bitALTERA_DCLK
+	clr	_bitALTERA_DCLK
+	
+	ret	
+
+    _endasm;
+}
+
+#endif
+
+static void
+clock_out_bytes (unsigned char bytecount,
+		 unsigned char xdata *p)
+{
+  while (bytecount-- > 0)
+    clock_out_config_byte (*p++);
+}
+
+/*
+ * Transfer block of bytes from packet to FPGA serial configuration port
+ *
+ * On entry:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ *
+ * On exit:
+ *	ALTERA_DCLK    = 0
+ *	ALTERA_NCONFIG = 1
+ *	ALTERA_NSTATUS = 1 (input)
+ */
+unsigned char
+fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
+{
+  clock_out_bytes (bytecount, p);
+  return 1;
+}
+
+/*
+ * check for successful load...
+ */
+unsigned char
+fpga_load_end (void)
+{
+  unsigned char status = USRP_ALTERA_CONFIG;
+
+  if (!UC_BOARD_HAS_FPGA)			// always true if we don't have FPGA
+    return 1;
+
+  if ((status & bmALTERA_NSTATUS) == 0)		// failed to program
+    return 0;
+
+  if ((status & bmALTERA_CONF_DONE) == bmALTERA_CONF_DONE)
+    return 1;					// everything's cool
+
+  // I don't think this should happen.  It indicates that
+  // programming is still in progress.
+
+  return 0;
+}
diff --git a/firmware/fx2/usrp1/fpga_rev2.c b/firmware/fx2/usrp1/fpga_rev2.c
new file mode 100644
index 000000000..cca961dc4
--- /dev/null
+++ b/firmware/fx2/usrp1/fpga_rev2.c
@@ -0,0 +1,122 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2004 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "fpga.h"
+#include "fpga_regs_common.h"
+#include "usrp_common.h"
+#include "usrp_globals.h"
+#include "spi.h"
+
+unsigned char g_tx_reset = 0;
+unsigned char g_rx_reset = 0;
+
+void
+fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
+{
+  spi_write (0, 0x00 | (regno & 0x7f),
+	     SPI_ENABLE_FPGA,
+	     SPI_FMT_MSB | SPI_FMT_HDR_1,
+	     regval, 4);
+}
+
+
+static xdata unsigned char regval[4] = {0, 0, 0, 0};
+
+static void
+write_fpga_master_ctrl (void)
+{
+  unsigned char v = 0;
+  if (g_tx_enable)
+    v |= bmFR_MC_ENABLE_TX;
+  if (g_rx_enable)
+    v |= bmFR_MC_ENABLE_RX;
+  if (g_tx_reset)
+    v |= bmFR_MC_RESET_TX;
+  if (g_rx_reset)
+    v |= bmFR_MC_RESET_RX;
+  regval[3] = v;
+
+  fpga_write_reg (FR_MASTER_CTRL, regval);
+}
+
+// Resets both AD9862's and the FPGA serial bus interface.
+
+void
+fpga_set_reset (unsigned char on)
+{
+  on &= 0x1;
+
+  if (on){
+    USRP_PC &= ~bmPC_nRESET;		// active low
+    g_tx_enable = 0;
+    g_rx_enable = 0;
+    g_tx_reset = 0;
+    g_rx_reset = 0;
+  }
+  else
+    USRP_PC |= bmPC_nRESET;
+}
+
+void
+fpga_set_tx_enable (unsigned char on)
+{
+  on &= 0x1;
+  g_tx_enable = on;
+
+  write_fpga_master_ctrl ();
+
+  if (on){
+    g_tx_underrun = 0;
+    fpga_clear_flags ();
+  }
+}
+
+void
+fpga_set_rx_enable (unsigned char on)
+{
+  on &= 0x1;
+  g_rx_enable = on;
+  
+  write_fpga_master_ctrl ();
+  if (on){
+    g_rx_overrun = 0;
+    fpga_clear_flags ();
+  }
+}
+
+void
+fpga_set_tx_reset (unsigned char on)
+{
+  on &= 0x1;
+  g_tx_reset = on;
+
+  write_fpga_master_ctrl ();
+}
+
+void
+fpga_set_rx_reset (unsigned char on)
+{
+  on &= 0x1;
+  g_rx_reset = on;
+  
+  write_fpga_master_ctrl ();
+}
diff --git a/firmware/fx2/usrp1/fpga_rev2.h b/firmware/fx2/usrp1/fpga_rev2.h
new file mode 100644
index 000000000..54ec3f9fa
--- /dev/null
+++ b/firmware/fx2/usrp1/fpga_rev2.h
@@ -0,0 +1,58 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#ifndef INCLUDED_FPGA_REV1_H
+#define INCLUDED_FPGA_REV1_H
+
+void fpga_set_reset (unsigned char v);
+void fpga_set_tx_enable (unsigned char v);
+void fpga_set_rx_enable (unsigned char v);
+void fpga_set_tx_reset (unsigned char v);
+void fpga_set_rx_reset (unsigned char v);
+
+unsigned char fpga_has_room_for_packet (void);
+unsigned char fpga_has_packet_avail (void);
+
+#if (UC_BOARD_HAS_FPGA)
+/*
+ * return TRUE iff FPGA internal fifo has room for 512 bytes.
+ */
+#define fpga_has_room_for_packet()	(GPIFREADYSTAT & bmFPGA_HAS_SPACE)
+
+/*
+ * return TRUE iff FPGA internal fifo has at least 512 bytes available.
+ */
+#define fpga_has_packet_avail()		(GPIFREADYSTAT & bmFPGA_PKT_AVAIL)
+
+#else	/* no FPGA on board.  fake it. */
+
+#define fpga_has_room_for_packet()	TRUE
+#define	fpga_has_packet_avail()		TRUE
+
+#endif
+
+#define	fpga_clear_flags()				\
+	do {						\
+	  USRP_PE |= bmPE_FPGA_CLR_STATUS;		\
+	  USRP_PE &= ~bmPE_FPGA_CLR_STATUS;		\
+        } while (0)
+
+
+#endif /* INCLUDED_FPGA_REV1_H */
diff --git a/firmware/fx2/usrp1/gpif.c b/firmware/fx2/usrp1/gpif.c
new file mode 100644
index 000000000..f6745a43b
--- /dev/null
+++ b/firmware/fx2/usrp1/gpif.c
@@ -0,0 +1,292 @@
+// This program configures the General Programmable Interface (GPIF) for FX2.     
+// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 
+//                                                                                
+// DO NOT EDIT ...                  
+// GPIF Initialization              
+// Interface Timing      Async        
+// Internal Ready Init   IntRdy=1     
+// CTL Out Tristate-able Binary       
+// SingleWrite WF Select     1     
+// SingleRead WF Select      0     
+// FifoWrite WF Select       3     
+// FifoRead WF Select        2     
+// Data Bus Idle Drive   Tristate     
+// END DO NOT EDIT                  
+                                    
+// DO NOT EDIT ...       
+// GPIF Wave Names       
+// Wave 0   = singlerd     
+// Wave 1   = singlewr     
+// Wave 2   = FIFORd       
+// Wave 3   = FIFOWr       
+                         
+// GPIF Ctrl Outputs   Level   
+// CTL 0    = WEN#     CMOS        
+// CTL 1    = REN#     CMOS        
+// CTL 2    = OE#      CMOS        
+// CTL 3    = CLRST    CMOS        
+// CTL 4    = unused   CMOS        
+// CTL 5    = BOGUS    CMOS        
+                               
+// GPIF Rdy Inputs         
+// RDY0     = EF#            
+// RDY1     = FF#            
+// RDY2     = unused         
+// RDY3     = unused         
+// RDY4     = unused         
+// RDY5     = TCXpire        
+// FIFOFlag = FIFOFlag       
+// IntReady = IntReady       
+// END DO NOT EDIT         
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 0: singlerd                                                                
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
+//   Term A                                                                                
+//   LFunc                                                                                 
+//   Term B                                                                                
+// Branch1                                                                                 
+// Branch0                                                                                 
+// Re-Exec                                                                                 
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         0         0         0         0         0         0         0    
+// REN#         0         0         0         0         0         0         0         0    
+// OE#          0         0         0         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 1: singlewr                                                                
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
+//   Term A           EF#                                                                  
+//   LFunc            AND                                                                  
+//   Term B           EF#                                                                  
+// Branch1            ThenIdle                                                             
+// Branch0            ElseIdle                                                             
+// Re-Exec            No                                                                   
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         1         1         1         1         1         1         0    
+// REN#         0         0         0         0         0         0         0         0    
+// OE#          0         0         0         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 2: FIFORd                                                                  
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             
+//   Term A           TCXpire             TCXpire                                          
+//   LFunc            AND                 AND                                              
+//   Term B           TCXpire             TCXpire                                          
+// Branch1            Then 2              ThenIdle                                         
+// Branch0            Else 1              ElseIdle                                         
+// Re-Exec            No                  No                                               
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         0         0         0         0         0         0         0    
+// REN#         1         0         0         0         0         0         0         0    
+// OE#          1         1         1         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+// DO NOT EDIT ...                                                                         
+//                                                                                         
+// GPIF Waveform 3: FIFOWr                                                                  
+//                                                                                         
+// Interval     0         1         2         3         4         5         6     Idle (7) 
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//                                                                                         
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
+// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
+//   Term A           TCXpire                                                              
+//   LFunc            AND                                                                  
+//   Term B           TCXpire                                                              
+// Branch1            ThenIdle                                                             
+// Branch0            Else 1                                                               
+// Re-Exec            No                                                                   
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
+// WEN#         0         0         0         0         0         0         0         0    
+// REN#         0         0         0         0         0         0         0         0    
+// OE#          0         0         0         0         0         0         0         0    
+// CLRST        0         0         0         0         0         0         0         0    
+// unused       0         0         0         0         0         0         0         0    
+// BOGUS        0         0         0         0         0         0         0         0    
+//                     
+// END DO NOT EDIT     
+                                              
+// GPIF Program Code                          
+                                              
+// DO NOT EDIT ...                            
+#include "fx2.h"                            
+#include "fx2regs.h"                        
+#include "fx2sdly.h"     // SYNCDELAY macro 
+// END DO NOT EDIT                            
+                                              
+// DO NOT EDIT ...                     
+const char xdata WaveData[128] =     
+{                                      
+// Wave 0 
+/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 1 
+/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 2 
+/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
+// Wave 3 
+/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+};                     
+// END DO NOT EDIT     
+                       
+// DO NOT EDIT ...                     
+const char xdata FlowStates[36] =   
+{                                      
+/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
+/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
+};                     
+// END DO NOT EDIT     
+                       
+// DO NOT EDIT ...                                               
+const char xdata InitData[7] =                                   
+{                                                                
+/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     
+};                                                               
+// END DO NOT EDIT                                               
+                                                                 
+// TO DO: You may add additional code below.
+
+void GpifInit( void )
+{
+  BYTE i;
+ 
+  // Registers which require a synchronization delay, see section 15.14
+  // FIFORESET        FIFOPINPOLAR
+  // INPKTEND         OUTPKTEND
+  // EPxBCH:L         REVCTL
+  // GPIFTCB3         GPIFTCB2
+  // GPIFTCB1         GPIFTCB0
+  // EPxFIFOPFH:L     EPxAUTOINLENH:L
+  // EPxFIFOCFG       EPxGPIFFLGSEL
+  // PINFLAGSxx       EPxFIFOIRQ
+  // EPxFIFOIE        GPIFIRQ
+  // GPIFIE           GPIFADRH:L
+  // UDMACRCH:L       EPxGPIFTRIG
+  // GPIFTRIG
+  
+  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
+  //      ...these have been replaced by GPIFTC[B3:B0] registers
+ 
+  // 8051 doesn't have access to waveform memories 'til
+  // the part is in GPIF mode.
+ 
+  IFCONFIG = 0xEE;
+  // IFCLKSRC=1   , FIFOs executes on internal clk source
+  // xMHz=1       , 48MHz internal clk rate
+  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz
+  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk
+  // ASYNC=1      , master samples asynchronous
+  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF
+  // IFCFG[1:0]=10, FX2 in GPIF master mode
+ 
+  GPIFABORT = 0xFF;  // abort any waveforms pending
+ 
+  GPIFREADYCFG = InitData[ 0 ];
+  GPIFCTLCFG = InitData[ 1 ];
+  GPIFIDLECS = InitData[ 2 ];
+  GPIFIDLECTL = InitData[ 3 ];
+  GPIFWFSELECT = InitData[ 5 ];
+  GPIFREADYSTAT = InitData[ 6 ];
+ 
+  // use dual autopointer feature... 
+  AUTOPTRSETUP = 0x07;          // inc both pointers, 
+                                // ...warning: this introduces pdata hole(s)
+                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)
+  
+  // source
+  AUTOPTRH1 = MSB( &WaveData );
+  AUTOPTRL1 = LSB( &WaveData );
+  
+  // destination
+  AUTOPTRH2 = 0xE4;
+  AUTOPTRL2 = 0x00;
+ 
+  // transfer
+  for ( i = 0x00; i < 128; i++ )
+  {
+    EXTAUTODAT2 = EXTAUTODAT1;
+  }
+ 
+// Configure GPIF Address pins, output initial value,
+  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]
+  OEC = 0xFF;         // and as outputs
+  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]
+  OEE |= 0x80;        // and as output
+ 
+// ...OR... tri-state GPIFADR[8:0] pins
+//  PORTCCFG = 0x00;  // [7:0] as port I/O
+//  OEC = 0x00;       // and as inputs
+//  PORTECFG &= 0x7F; // [8] as port I/O
+//  OEE &= 0x7F;      // and as input
+ 
+// GPIF address pins update when GPIFADRH/L written
+  SYNCDELAY;                    // 
+  GPIFADRH = 0x00;    // bits[7:1] always 0
+  SYNCDELAY;                    // 
+  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000
+ 
+// Configure GPIF FlowStates registers for Wave 0 of WaveData
+  FLOWSTATE = FlowStates[ 0 ];
+  FLOWLOGIC = FlowStates[ 1 ];
+  FLOWEQ0CTL = FlowStates[ 2 ];
+  FLOWEQ1CTL = FlowStates[ 3 ];
+  FLOWHOLDOFF = FlowStates[ 4 ];
+  FLOWSTB = FlowStates[ 5 ];
+  FLOWSTBEDGE = FlowStates[ 6 ];
+  FLOWSTBHPERIOD = FlowStates[ 7 ];
+}
+ 
diff --git a/firmware/fx2/usrp1/gpif.gpf b/firmware/fx2/usrp1/gpif.gpf
new file mode 100755
index 000000000..854e25399
--- /dev/null
+++ b/firmware/fx2/usrp1/gpif.gpf
diff --git a/firmware/fx2/usrp1/usb_descriptors.a51 b/firmware/fx2/usrp1/usb_descriptors.a51
new file mode 100644
index 000000000..a60adbef8
--- /dev/null
+++ b/firmware/fx2/usrp1/usb_descriptors.a51
@@ -0,0 +1,404 @@
+;;; -*- asm -*-
+;;;
+;;; Copyright 2003 Free Software Foundation, Inc.
+;;; 
+;;; This file is part of GNU Radio
+;;; 
+;;; GNU Radio is free software; you can redistribute it and/or modify
+;;; it under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3, or (at your option)
+;;; any later version.
+;;; 
+;;; GNU Radio is distributed in the hope that it will be useful,
+;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;; 
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Radio; see the file COPYING.  If not, write to
+;;; the Free Software Foundation, Inc., 51 Franklin Street,
+;;; Boston, MA 02110-1301, USA.
+;;;
+	
+;;; USB Descriptor table for the USRP
+;;; 
+;;; We're a high-speed only device (480 Mb/sec) with 1 configuration
+;;; and 3 interfaces.  
+;;; 
+;;;	interface 0:	command and status (ep0 COMMAND)
+;;;	interface 1:	Transmit path (ep2 OUT BULK)
+;;;	interface 2:	Receive path (ep6 IN BULK)
+
+	.module usb_descriptors
+	
+	VID_FREE	 = 0xfffe	; Free Software Folks
+	PID_USRP	 = 0x0002	; USRP
+
+	;; We distinguish configured from unconfigured USRPs using the Device ID.
+	;; If the MSB of the DID is 0, the device is unconfigured.
+	;; The LSB of the DID is reserved for hardware revs.
+	
+	DID_USRP	 = 0x0100	; Device ID (bcd)
+
+	
+	DSCR_DEVICE	 =   1	; Descriptor type: Device
+	DSCR_CONFIG	 =   2	; Descriptor type: Configuration
+	DSCR_STRING	 =   3	; Descriptor type: String
+	DSCR_INTRFC	 =   4	; Descriptor type: Interface
+	DSCR_ENDPNT	 =   5	; Descriptor type: Endpoint
+	DSCR_DEVQUAL	 =   6	; Descriptor type: Device Qualifier
+	
+	DSCR_DEVICE_LEN	 =  18
+	DSCR_CONFIG_LEN  =   9
+	DSCR_INTRFC_LEN  =   9
+	DSCR_ENDPNT_LEN  =   7
+	DSCR_DEVQUAL_LEN =  10
+	
+	ET_CONTROL	 =   0	; Endpoint type: Control
+	ET_ISO		 =   1	; Endpoint type: Isochronous
+	ET_BULK		 =   2	; Endpoint type: Bulk
+	ET_INT		 =   3	; Endpoint type: Interrupt
+	
+	
+	;; configuration attributes
+	bmSELF_POWERED	=	1 << 6
+
+;;; --------------------------------------------------------
+;;;	external ram data
+;;;--------------------------------------------------------
+	
+	.area USBDESCSEG    (XDATA)
+	
+;;; ----------------------------------------------------------------
+;;; descriptors used when operating at high speed (480Mb/sec)
+;;; ----------------------------------------------------------------
+	
+	.even	; descriptors must be 2-byte aligned for SUDPTR{H,L} to work
+
+	;; The .even directive isn't really honored by the linker.  Bummer!
+	;; (There's no way to specify an alignment requirement for a given area,
+	;; hence when they're concatenated together, even doesn't work.)
+	;; 
+	;; We work around this by telling the linker to put USBDESCSEG
+	;; at 0xE000 absolute.  This means that the maximimum length of this
+	;; segment is 480 bytes, leaving room for the two hash slots 
+	;; at 0xE1EO to 0xE1FF.  
+	;; 
+	;; As of July 7, 2004, this segment is 326 bytes long
+	
+_high_speed_device_descr::
+	.db	DSCR_DEVICE_LEN
+	.db	DSCR_DEVICE
+	.db	<0x0200		; Specification version (LSB)
+	.db	>0x0200		; Specification version (MSB)
+	.db	0xff		; device class (vendor specific)
+	.db	0xff		; device subclass (vendor specific)
+	.db	0xff		; device protocol (vendor specific)
+	.db	64		; bMaxPacketSize0 for endpoint 0
+	.db	<VID_FREE	; idVendor
+	.db	>VID_FREE	; idVendor
+	.db	<PID_USRP	; idProduct
+	.db	>PID_USRP	; idProduct
+_usb_desc_hw_rev_binary_patch_location_0::
+	.db	<DID_USRP	; bcdDevice
+	.db	>DID_USRP	; bcdDevice
+	.db	SI_VENDOR	; iManufacturer (string index)
+	.db	SI_PRODUCT	; iProduct (string index)
+	.db	SI_SERIAL	; iSerial number (string index)
+	.db	1		; bNumConfigurations
+	
+;;; describes the other speed (12Mb/sec)
+	.even
+_high_speed_devqual_descr::
+	.db	DSCR_DEVQUAL_LEN
+	.db	DSCR_DEVQUAL
+	.db	<0x0200		; bcdUSB (LSB)
+	.db	>0x0200		; bcdUSB (MSB)
+	.db	0xff		; bDeviceClass
+	.db	0xff		; bDeviceSubClass
+	.db	0xff		; bDeviceProtocol
+	.db	64		; bMaxPacketSize0
+	.db	1		; bNumConfigurations (one config at 12Mb/sec)
+	.db	0		; bReserved
+	
+	.even
+_high_speed_config_descr::	
+	.db	DSCR_CONFIG_LEN
+	.db	DSCR_CONFIG
+	.db	<(_high_speed_config_descr_end - _high_speed_config_descr) ; LSB
+	.db	>(_high_speed_config_descr_end - _high_speed_config_descr) ; MSB
+	.db	3		; bNumInterfaces
+	.db	1		; bConfigurationValue
+	.db	0		; iConfiguration
+	.db	0x80 | bmSELF_POWERED ; bmAttributes
+	.db	0		; bMaxPower
+
+	;; interface descriptor 0 (command & status, ep0 COMMAND)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	0		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	0		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
+
+	;; interface descriptor 1 (transmit path, ep2 OUT BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	1		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_TX_PATH	; iInterface (description)
+
+	;; interface 1's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x02		; bEndpointAddress (ep 2 OUT)
+	.db	ET_BULK		; bmAttributes
+	.db	<512		; wMaxPacketSize (LSB)
+	.db	>512		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+	;; interface descriptor 2 (receive path, ep6 IN BULK)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	2		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	1		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_RX_PATH	; iInterface (description)
+
+	;; interface 2's end point
+
+	.db	DSCR_ENDPNT_LEN
+	.db	DSCR_ENDPNT
+	.db	0x86		; bEndpointAddress (ep 6 IN)
+	.db	ET_BULK		; bmAttributes
+	.db	<512		; wMaxPacketSize (LSB)
+	.db	>512		; wMaxPacketSize (MSB)
+	.db	0		; bInterval (iso only)
+
+_high_speed_config_descr_end:		
+
+;;; ----------------------------------------------------------------
+;;; descriptors used when operating at full speed (12Mb/sec)
+;;; ----------------------------------------------------------------
+
+	.even
+_full_speed_device_descr::	
+	.db	DSCR_DEVICE_LEN
+	.db	DSCR_DEVICE
+	.db	<0x0200		; Specification version (LSB)
+	.db	>0x0200		; Specification version (MSB)
+	.db	0xff		; device class (vendor specific)
+	.db	0xff		; device subclass (vendor specific)
+	.db	0xff		; device protocol (vendor specific)
+	.db	64		; bMaxPacketSize0 for endpoint 0
+	.db	<VID_FREE	; idVendor
+	.db	>VID_FREE	; idVendor
+	.db	<PID_USRP	; idProduct
+	.db	>PID_USRP	; idProduct
+_usb_desc_hw_rev_binary_patch_location_1::
+	.db	<DID_USRP	; bcdDevice
+	.db	>DID_USRP	; bcdDevice
+	.db	SI_VENDOR	; iManufacturer (string index)
+	.db	SI_PRODUCT	; iProduct (string index)
+	.db	SI_NONE		; iSerial number (None)
+	.db	1		; bNumConfigurations
+	
+	
+;;; describes the other speed (480Mb/sec)
+	.even
+_full_speed_devqual_descr::
+	.db	DSCR_DEVQUAL_LEN
+	.db	DSCR_DEVQUAL
+	.db	<0x0200		; bcdUSB
+	.db	>0x0200		; bcdUSB
+	.db	0xff		; bDeviceClass
+	.db	0xff		; bDeviceSubClass
+	.db	0xff		; bDeviceProtocol
+	.db	64		; bMaxPacketSize0
+	.db	1		; bNumConfigurations (one config at 480Mb/sec)
+	.db	0		; bReserved
+	
+	.even
+_full_speed_config_descr::	
+	.db	DSCR_CONFIG_LEN
+	.db	DSCR_CONFIG
+	.db	<(_full_speed_config_descr_end - _full_speed_config_descr) ; LSB
+	.db	>(_full_speed_config_descr_end - _full_speed_config_descr) ; MSB
+	.db	1		; bNumInterfaces
+	.db	1		; bConfigurationValue
+	.db	0		; iConfiguration
+	.db	0x80 | bmSELF_POWERED ; bmAttributes
+	.db	0		; bMaxPower
+
+	;; interface descriptor 0 (command & status, ep0 COMMAND)
+	
+	.db	DSCR_INTRFC_LEN
+	.db	DSCR_INTRFC
+	.db	0		; bInterfaceNumber (zero based)
+	.db	0		; bAlternateSetting
+	.db	0		; bNumEndpoints
+	.db	0xff		; bInterfaceClass (vendor specific)
+	.db	0xff		; bInterfaceSubClass (vendor specific)
+	.db	0xff		; bInterfaceProtocol (vendor specific)
+	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
+	
+_full_speed_config_descr_end:	
+	
+;;; ----------------------------------------------------------------
+;;;			string descriptors
+;;; ----------------------------------------------------------------
+
+_nstring_descriptors::
+	.db	(_string_descriptors_end - _string_descriptors) / 2
+
+_string_descriptors::
+	.db	<str0, >str0
+	.db	<str1, >str1
+	.db	<str2, >str2
+	.db	<str3, >str3
+	.db	<str4, >str4
+	.db	<str5, >str5
+	.db	<str6, >str6
+_string_descriptors_end:
+
+	SI_NONE = 0
+	;; str0 contains the language ID's.
+	.even
+str0:	.db	str0_end - str0
+	.db	DSCR_STRING
+	.db	0
+	.db	0
+	.db	<0x0409		; magic code for US English (LSB)
+	.db	>0x0409		; magic code for US English (MSB)
+str0_end:
+
+	SI_VENDOR = 1
+	.even
+str1:	.db	str1_end - str1
+	.db	DSCR_STRING
+	.db	'F, 0		; 16-bit unicode
+	.db	'r, 0
+	.db	'e, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'S, 0
+	.db	'o, 0
+	.db	'f, 0
+	.db	't, 0
+	.db	'w, 0
+	.db	'a, 0
+	.db	'r, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'F, 0
+	.db	'o, 0
+	.db	'l, 0
+	.db	'k, 0
+	.db	's, 0
+str1_end:
+
+	SI_PRODUCT = 2
+	.even
+str2:	.db	str2_end - str2
+	.db	DSCR_STRING
+	.db	'U, 0
+	.db	'S, 0
+	.db	'R, 0
+	.db	'P, 0
+	.db	' , 0
+	.db	'R, 0
+	.db	'e, 0
+	.db	'v, 0
+	.db	' , 0
+_usb_desc_hw_rev_ascii_patch_location_0::
+	.db	'?, 0
+str2_end:
+
+	SI_COMMAND_AND_STATUS = 3
+	.even
+str3:	.db	str3_end - str3
+	.db	DSCR_STRING
+	.db	'C, 0
+	.db	'o, 0
+	.db	'm, 0
+	.db	'm, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	'd, 0
+	.db	' , 0
+	.db	'&, 0
+	.db	' , 0
+	.db	'S, 0
+	.db	't, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'u, 0
+	.db	's, 0
+str3_end:
+
+	SI_TX_PATH = 4
+	.even
+str4:	.db	str4_end - str4
+	.db	DSCR_STRING
+	.db	'T, 0
+	.db	'r, 0
+	.db	'a, 0
+	.db	'n, 0
+	.db	's, 0
+	.db	'm, 0
+	.db	'i, 0
+	.db	't, 0
+	.db	' , 0
+	.db	'P, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'h, 0
+str4_end:
+
+	SI_RX_PATH = 5
+	.even
+str5:	.db	str5_end - str5
+	.db	DSCR_STRING
+	.db	'R, 0
+	.db	'e, 0
+	.db	'c, 0
+	.db	'e, 0
+	.db	'i, 0
+	.db	'v, 0
+	.db	'e, 0
+	.db	' , 0
+	.db	'P, 0
+	.db	'a, 0
+	.db	't, 0
+	.db	'h, 0
+str5_end:
+
+	SI_SERIAL = 6
+	.even
+str6:	.db	str6_end - str6
+	.db	DSCR_STRING
+_usb_desc_serial_number_ascii::
+	.db	'3, 0
+	.db	'., 0
+	.db	'1, 0
+	.db	'4, 0
+	.db	'1, 0
+	.db	'5, 0
+	.db	'9, 0
+	.db	'3, 0
+str6_end:
+
diff --git a/firmware/fx2/usrp1/usrp_common.c b/firmware/fx2/usrp1/usrp_common.c
new file mode 100644
index 000000000..0998653c2
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_common.c
@@ -0,0 +1,109 @@
+/*
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/* 
+ * common code for USRP
+ */
+
+#include "usrp_common.h"
+
+void init_board (void);
+
+void
+init_usrp (void)
+{
+  CPUCS = bmCLKSPD1;	// CPU runs @ 48 MHz
+  CKCON = 0;		// MOVX takes 2 cycles
+
+  // IFCLK is generated internally and runs at 48 MHz; GPIF "master mode"
+
+  IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFCLKPOL | bmIFGPIF;
+  SYNCDELAY;
+
+  // configure IO ports (B and D are used by GPIF)
+
+  IOA = bmPORT_A_INITIAL;	// Port A initial state
+  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
+
+  IOC = bmPORT_C_INITIAL;	// Port C initial state
+  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
+
+  IOE = bmPORT_E_INITIAL;	// Port E initial state
+  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
+
+
+  // REVCTL = bmDYN_OUT | bmENH_PKT;			// highly recommended by docs
+  // SYNCDELAY;
+  
+  // configure end points
+
+  EP1OUTCFG = bmVALID | bmBULK;				SYNCDELAY;
+  EP1INCFG  = bmVALID | bmBULK | bmIN;			SYNCDELAY;
+
+  EP2CFG    = bmVALID | bmBULK | bmQUADBUF;		SYNCDELAY;	// 512 quad bulk OUT
+  EP4CFG    = 0;					SYNCDELAY;	// disabled
+  EP6CFG    = bmVALID | bmBULK | bmQUADBUF | bmIN;	SYNCDELAY;	// 512 quad bulk IN
+  EP8CFG    = 0;					SYNCDELAY;	// disabled
+
+  // reset FIFOs
+
+  FIFORESET = bmNAKALL;					SYNCDELAY;
+  FIFORESET = 2;					SYNCDELAY;
+  // FIFORESET = 4;					SYNCDELAY;
+  FIFORESET = 6;					SYNCDELAY;
+  // FIFORESET = 8;					SYNCDELAY;
+  FIFORESET = 0;					SYNCDELAY;
+  
+  // configure end point FIFOs
+
+  // let core see 0 to 1 transistion of autoout bit
+
+  EP2FIFOCFG =             bmWORDWIDE;			SYNCDELAY;
+  EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE;			SYNCDELAY;
+  EP6FIFOCFG = bmAUTOIN  | bmWORDWIDE;			SYNCDELAY;
+
+
+  // prime the pump 
+
+#if 0
+  EP2BCL  = 0x80;		SYNCDELAY;
+  EP2BCL  = 0x80;		SYNCDELAY;
+  EP2BCL  = 0x80;		SYNCDELAY;
+  EP2BCL  = 0x80;		SYNCDELAY;
+#endif
+
+  EP0BCH = 0;			SYNCDELAY;
+
+  // arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
+
+  EP1OUTBC = 0;			SYNCDELAY;
+
+  EP2GPIFFLGSEL = 0x01;		SYNCDELAY; // For EP2OUT, GPIF uses EF flag
+  EP6GPIFFLGSEL = 0x02;		SYNCDELAY; // For EP6IN,  GPIF uses FF flag
+
+  // set autoin length for EP6
+  // FIXME should be f(enumeration)
+
+  EP6AUTOINLENH = (512) >> 8;	SYNCDELAY;  // this is the length for high speed
+  EP6AUTOINLENL = (512) & 0xff; SYNCDELAY;
+
+  init_board ();
+}
+
diff --git a/firmware/fx2/usrp1/usrp_gpif.c b/firmware/fx2/usrp1/usrp_gpif.c
new file mode 100644
index 000000000..1191c8b28
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_gpif.c
@@ -0,0 +1,206 @@
+/*
+ * Machine generated by "edit-gpif".  Do not edit by hand.
+ */
+
+// This program configures the General Programmable Interface (GPIF) for FX2.
+// Please do not modify sections of text which are marked as "DO NOT EDIT ...".
+//
+// DO NOT EDIT ...
+// GPIF Initialization
+// Interface Timing      Async
+// Internal Ready Init   IntRdy=1
+// CTL Out Tristate-able Binary
+// SingleWrite WF Select     1
+// SingleRead WF Select      0
+// FifoWrite WF Select       3
+// FifoRead WF Select        2
+// Data Bus Idle Drive   Tristate
+// END DO NOT EDIT
+
+// DO NOT EDIT ...
+// GPIF Wave Names
+// Wave 0   = singlerd
+// Wave 1   = singlewr
+// Wave 2   = FIFORd
+// Wave 3   = FIFOWr
+
+// GPIF Ctrl Outputs   Level
+// CTL 0    = WEN#     CMOS
+// CTL 1    = REN#     CMOS
+// CTL 2    = OE#      CMOS
+// CTL 3    = CLRST    CMOS
+// CTL 4    = unused   CMOS
+// CTL 5    = BOGUS    CMOS
+
+// GPIF Rdy Inputs
+// RDY0     = EF#
+// RDY1     = FF#
+// RDY2     = unused
+// RDY3     = unused
+// RDY4     = unused
+// RDY5     = TCXpire
+// FIFOFlag = FIFOFlag
+// IntReady = IntReady
+// END DO NOT EDIT
+// DO NOT EDIT ...
+//
+// GPIF Waveform 0: singlerd
+//
+// Interval     0         1         2         3         4         5         6     Idle (7)
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
+// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
+// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1
+//   Term A
+//   LFunc
+//   Term B
+// Branch1
+// Branch0
+// Re-Exec
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
+// WEN#         0         0         0         0         0         0         0         0
+// REN#         0         0         0         0         0         0         0         0
+// OE#          0         0         0         0         0         0         0         0
+// CLRST        0         0         0         0         0         0         0         0
+// unused       0         0         0         0         0         0         0         0
+// BOGUS        0         0         0         0         0         0         0         0
+//
+// END DO NOT EDIT
+// DO NOT EDIT ...
+//
+// GPIF Waveform 1: singlewr
+//
+// Interval     0         1         2         3         4         5         6     Idle (7)
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
+// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1
+//   Term A           EF#
+//   LFunc            AND
+//   Term B           EF#
+// Branch1            ThenIdle
+// Branch0            ElseIdle
+// Re-Exec            No
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
+// WEN#         0         1         1         1         1         1         1         0
+// REN#         0         0         0         0         0         0         0         0
+// OE#          0         0         0         0         0         0         0         0
+// CLRST        0         0         0         0         0         0         0         0
+// unused       0         0         0         0         0         0         0         0
+// BOGUS        0         0         0         0         0         0         0         0
+//
+// END DO NOT EDIT
+// DO NOT EDIT ...
+//
+// GPIF Waveform 2: FIFORd
+//
+// Interval     0         1         2         3         4         5         6     Idle (7)
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
+// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
+// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1
+//   Term A           TCXpire             TCXpire
+//   LFunc            AND                 AND
+//   Term B           TCXpire             TCXpire
+// Branch1            Then 2              ThenIdle
+// Branch0            Else 1              ElseIdle
+// Re-Exec            No                  No
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
+// WEN#         0         0         0         0         0         0         0         0
+// REN#         1         0         0         0         0         0         0         0
+// OE#          1         1         1         0         0         0         0         0
+// CLRST        0         0         0         0         0         0         0         0
+// unused       0         0         0         0         0         0         0         0
+// BOGUS        0         0         0         0         0         0         0         0
+//
+// END DO NOT EDIT
+// DO NOT EDIT ...
+//
+// GPIF Waveform 3: FIFOWr
+//
+// Interval     0         1         2         3         4         5         6     Idle (7)
+//          _________ _________ _________ _________ _________ _________ _________ _________
+//
+// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val
+// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate
+// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData
+// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int
+// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1
+//   Term A           TCXpire
+//   LFunc            AND
+//   Term B           TCXpire
+// Branch1            ThenIdle
+// Branch0            Else 1
+// Re-Exec            No
+// Sngl/CRC Default   Default   Default   Default   Default   Default   Default
+// WEN#         0         0         0         0         0         0         0         0
+// REN#         0         0         0         0         0         0         0         0
+// OE#          0         0         0         0         0         0         0         0
+// CLRST        0         0         0         0         0         0         0         0
+// unused       0         0         0         0         0         0         0         0
+// BOGUS        0         0         0         0         0         0         0         0
+//
+// END DO NOT EDIT
+
+// GPIF Program Code
+
+// DO NOT EDIT ...
+// #include "fx2.h"
+// #include "fx2regs.h"
+// #include "fx2sdly.h"     // SYNCDELAY macro
+// END DO NOT EDIT
+
+// DO NOT EDIT ...
+const char WaveData[128] =
+{
+// Wave 0
+/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 1
+/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
+/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+// Wave 2
+/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
+/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
+// Wave 3
+/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
+/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
+/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
+/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
+};
+// END DO NOT EDIT
+
+// DO NOT EDIT ...
+const char FlowStates[36] =
+{
+/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
+/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
+};
+// END DO NOT EDIT
+
+// DO NOT EDIT ...
+const char InitData[7] =
+{
+/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00
+};
+// END DO NOT EDIT
+
+// TO DO: You may add additional code below.
+
diff --git a/firmware/fx2/usrp1/usrp_gpif_inline.h b/firmware/fx2/usrp1/usrp_gpif_inline.h
new file mode 100644
index 000000000..77a741a8b
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_gpif_inline.h
@@ -0,0 +1,27 @@
+/*
+ * Machine generated by "edit-gpif".  Do not edit by hand.
+ */
+
+#define setup_flowstate_common()	\
+do {					\
+     FLOWSTATE = 0x81;			\
+     FLOWLOGIC = 0x2d;			\
+    FLOWEQ0CTL = 0x26;			\
+    FLOWEQ1CTL = 0x00;			\
+   FLOWHOLDOFF = 0x04;			\
+       FLOWSTB = 0x04;			\
+   FLOWSTBEDGE = 0x03;			\
+FLOWSTBHPERIOD = 0x02;			\
+GPIFHOLDAMOUNT = 0x00;			\
+} while (0)
+
+#define setup_flowstate_read()	\
+do {					\
+    FLOWEQ0CTL = 0x26;			\
+} while (0)
+
+#define setup_flowstate_write()	\
+do {					\
+    FLOWEQ0CTL = 0x21;			\
+} while (0)
+
diff --git a/firmware/fx2/usrp1/usrp_main.c b/firmware/fx2/usrp1/usrp_main.c
new file mode 100644
index 000000000..802516c0b
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_main.c
@@ -0,0 +1,381 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#include "usrp_common.h"
+#include "usrp_regs.h"
+#include "usrp_commands.h"
+#include "fpga.h"
+#include "usrp_gpif_inline.h"
+#include "timer.h"
+#include "i2c.h"
+#include "isr.h"
+#include "usb_common.h"
+#include "fx2utils.h"
+#include "usrp_globals.h"
+#include "usrp_i2c_addr.h"
+#include <string.h>
+#include "spi.h"
+#include "eeprom_io.h"
+#include "usb_descriptors.h"
+
+/*
+ * offsets into boot eeprom for configuration values
+ */
+#define	HW_REV_OFFSET		  5
+#define SERIAL_NO_OFFSET	248
+#define SERIAL_NO_LEN		  8
+
+
+#define	bRequestType	SETUPDAT[0]
+#define	bRequest	SETUPDAT[1]
+#define	wValueL		SETUPDAT[2]
+#define	wValueH		SETUPDAT[3]
+#define	wIndexL		SETUPDAT[4]
+#define	wIndexH		SETUPDAT[5]
+#define	wLengthL	SETUPDAT[6]
+#define	wLengthH	SETUPDAT[7]
+
+
+unsigned char g_tx_enable = 0;
+unsigned char g_rx_enable = 0;
+unsigned char g_rx_overrun = 0;
+unsigned char g_tx_underrun = 0;
+
+/*
+ * the host side fpga loader code pushes an MD5 hash of the bitstream
+ * into hash1.
+ */
+#define	  USRP_HASH_SIZE      16
+xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
+
+static void
+get_ep0_data (void)
+{
+  EP0BCL = 0;			// arm EP0 for OUT xfer.  This sets the busy bit
+
+  while (EP0CS & bmEPBUSY)	// wait for busy to clear
+    ;
+}
+
+/*
+ * Handle our "Vendor Extension" commands on endpoint 0.
+ * If we handle this one, return non-zero.
+ */
+unsigned char
+app_vendor_cmd (void)
+{
+  if (bRequestType == VRT_VENDOR_IN){
+
+    /////////////////////////////////
+    //    handle the IN requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_GET_STATUS:
+      switch (wIndexL){
+
+      case GS_TX_UNDERRUN:
+	EP0BUF[0] = g_tx_underrun;
+	g_tx_underrun = 0;
+	EP0BCH = 0;
+	EP0BCL = 1;
+	break;
+
+      case GS_RX_OVERRUN:
+	EP0BUF[0] = g_rx_overrun;
+	g_rx_overrun = 0;
+	EP0BCH = 0;
+	EP0BCL = 1;
+	break;
+
+      default:
+	return 0;
+      }
+      break;
+
+    case VRQ_I2C_READ:
+      if (!i2c_read (wValueL, EP0BUF, wLengthL))
+	return 0;
+
+      EP0BCH = 0;
+      EP0BCL = wLengthL;
+      break;
+      
+    case VRQ_SPI_READ:
+      if (!spi_read (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, wLengthL))
+	return 0;
+
+      EP0BCH = 0;
+      EP0BCL = wLengthL;
+      break;
+
+    default:
+      return 0;
+    }
+  }
+
+  else if (bRequestType == VRT_VENDOR_OUT){
+
+    /////////////////////////////////
+    //    handle the OUT requests
+    /////////////////////////////////
+
+    switch (bRequest){
+
+    case VRQ_SET_LED:
+      switch (wIndexL){
+      case 0:
+	set_led_0 (wValueL);
+	break;
+	
+      case 1:
+	set_led_1 (wValueL);
+	break;
+	
+      default:
+	return 0;
+      }
+      break;
+      
+    case VRQ_FPGA_LOAD:
+      switch (wIndexL){			// sub-command
+      case FL_BEGIN:
+	return fpga_load_begin ();
+	
+      case FL_XFER:
+	get_ep0_data ();
+	return fpga_load_xfer (EP0BUF, EP0BCL);
+	
+      case FL_END:
+	return fpga_load_end ();
+	
+      default:
+	return 0;
+      }
+      break;
+      
+
+    case VRQ_FPGA_SET_RESET:
+      fpga_set_reset (wValueL);
+      break;
+      
+    case VRQ_FPGA_SET_TX_ENABLE:
+      fpga_set_tx_enable (wValueL);
+      break;
+      
+    case VRQ_FPGA_SET_RX_ENABLE:
+      fpga_set_rx_enable (wValueL);
+      break;
+
+    case VRQ_FPGA_SET_TX_RESET:
+      fpga_set_tx_reset (wValueL);
+      break;
+      
+    case VRQ_FPGA_SET_RX_RESET:
+      fpga_set_rx_reset (wValueL);
+      break;
+
+    case VRQ_I2C_WRITE:
+      get_ep0_data ();
+      if (!i2c_write (wValueL, EP0BUF, EP0BCL))
+	return 0;
+      break;
+
+    case VRQ_SPI_WRITE:
+      get_ep0_data ();
+      if (!spi_write (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, EP0BCL))
+	return 0;
+      break;
+
+    default:
+      return 0;
+    }
+
+  }
+  else
+    return 0;    // invalid bRequestType
+
+  return 1;
+}
+
+
+
+static void
+main_loop (void)
+{
+  setup_flowstate_common ();
+
+  while (1){
+
+    if (usb_setup_packet_avail ())
+      usb_handle_setup_packet ();
+    
+  
+    if (GPIFTRIG & bmGPIF_IDLE){
+
+      // OK, GPIF is idle.  Let's try to give it some work.
+
+      // First check for underruns and overruns
+
+      if (UC_BOARD_HAS_FPGA && (USRP_PA & (bmPA_TX_UNDERRUN | bmPA_RX_OVERRUN))){
+      
+	// record the under/over run
+	if (USRP_PA & bmPA_TX_UNDERRUN)
+	  g_tx_underrun = 1;
+
+	if (USRP_PA & bmPA_RX_OVERRUN)
+	  g_rx_overrun = 1;
+
+	// tell the FPGA to clear the flags
+	fpga_clear_flags ();
+      }
+
+      // Next see if there are any "OUT" packets waiting for our attention,
+      // and if so, if there's room in the FPGA's FIFO for them.
+
+      if (g_tx_enable && !(EP24FIFOFLGS & 0x02)){  // USB end point fifo is not empty...
+
+	if (fpga_has_room_for_packet ()){	   // ... and FPGA has room for packet
+
+	  GPIFTCB1 = 0x01;	SYNCDELAY;
+	  GPIFTCB0 = 0x00;	SYNCDELAY;
+
+	  setup_flowstate_write ();
+
+	  SYNCDELAY;
+	  GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; 	// start the xfer
+	  SYNCDELAY;
+
+	  while (!(GPIFTRIG & bmGPIF_IDLE)){
+	    // wait for the transaction to complete
+	  }
+	}
+      }
+
+      // See if there are any requests for "IN" packets, and if so
+      // whether the FPGA's got any packets for us.
+
+      if (g_rx_enable && !(EP6CS & bmEPFULL)){	// USB end point fifo is not full...
+
+	if (fpga_has_packet_avail ()){		// ... and FPGA has packet available
+
+	  GPIFTCB1 = 0x01;	SYNCDELAY;
+	  GPIFTCB0 = 0x00;	SYNCDELAY;
+
+	  setup_flowstate_read ();
+
+	  SYNCDELAY;
+	  GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
+	  SYNCDELAY;
+
+	  while (!(GPIFTRIG & bmGPIF_IDLE)){
+	    // wait for the transaction to complete
+	  }
+
+	  SYNCDELAY;
+	  INPKTEND = 6;	// tell USB we filled buffer (6 is our endpoint num)
+	}
+      }
+    }
+  }
+}
+
+
+/*
+ * called at 100 Hz from timer2 interrupt
+ *
+ * Toggle led 0
+ */
+void
+isr_tick (void) interrupt
+{
+  static unsigned char	count = 1;
+  
+  if (--count == 0){
+    count = 50;
+    USRP_LED_REG ^= bmLED0;
+  }
+
+  clear_timer_irq ();
+}
+
+/*
+ * Read h/w rev code and serial number out of boot eeprom and
+ * patch the usb descriptors with the values.
+ */
+void
+patch_usb_descriptors(void)
+{
+  static xdata unsigned char hw_rev;
+  static xdata unsigned char serial_no[8];
+  unsigned char i;
+
+  eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1);	// LSB of device id
+  usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev;
+  usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev;
+  usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0';     // FIXME if we get > 9
+
+  eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN);
+
+  for (i = 0; i < SERIAL_NO_LEN; i++){
+    unsigned char ch = serial_no[i];
+    if (ch == 0xff)	// make unprogrammed EEPROM default to '0'
+      ch = '0';
+    usb_desc_serial_number_ascii[i << 1] = ch;
+  }
+}
+
+void
+main (void)
+{
+#if 0
+  g_rx_enable = 0;	// FIXME (work around initialization bug)
+  g_tx_enable = 0;
+  g_rx_overrun = 0;
+  g_tx_underrun = 0;
+#endif
+
+  memset (hash1, 0, USRP_HASH_SIZE);	// zero fpga bitstream hash.  This forces reload
+  
+  init_usrp ();
+  init_gpif ();
+  
+  // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED)
+  IFCONFIG |= bmGSTATE;			// no conflict, start with it on
+
+  set_led_0 (0);
+  set_led_1 (0);
+  
+  EA = 0;		// disable all interrupts
+
+  patch_usb_descriptors();
+
+  setup_autovectors ();
+  usb_install_handlers ();
+  hook_timer_tick ((unsigned short) isr_tick);
+
+  EIEX4 = 1;		// disable INT4 FIXME
+  EA = 1;		// global interrupt enable
+
+  fx2_renumerate ();	// simulates disconnect / reconnect
+
+  main_loop ();
+}
diff --git a/firmware/fx2/usrp1/usrp_regs.h b/firmware/fx2/usrp1/usrp_regs.h
new file mode 100644
index 000000000..a4f1d9896
--- /dev/null
+++ b/firmware/fx2/usrp1/usrp_regs.h
@@ -0,0 +1,163 @@
+/*
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+/*
+ * These are the register definitions for the Rev 1 USRP prototype
+ * The Rev 1 is the version with the AD9862's and daughterboards
+ */
+
+#ifndef _USRP_REV1_REGS_H_
+#define _USRP_REV1_REGS_H_
+
+#include "fx2regs.h"
+
+/*
+ * Port A (bit addressable):
+ */
+
+#define USRP_PA			IOA		// Port A
+#define	USRP_PA_OE		OEA		// Port A direction register
+
+#define bmPA_S_CLK		bmBIT0		// SPI serial clock
+#define	bmPA_S_DATA_TO_PERIPH	bmBIT1		// SPI SDI (peripheral rel name)
+#define bmPA_S_DATA_FROM_PERIPH	bmBIT2		// SPI SDO (peripheral rel name)
+#define bmPA_SEN_FPGA		bmBIT3		// serial enable for FPGA (active low)
+#define	bmPA_SEN_CODEC_A	bmBIT4		// serial enable AD9862 A (active low)
+#define	bmPA_SEN_CODEC_B	bmBIT5		// serial enable AD9862 B (active low)
+//#define bmPA_FX2_2		bmBIT6		// misc pin to FPGA (overflow)
+//#define bmPA_FX2_3		bmBIT7		// misc pin to FPGA (underflow)
+#define	bmPA_RX_OVERRUN		bmBIT6		// misc pin to FPGA (overflow)
+#define	bmPA_TX_UNDERRUN	bmBIT7		// misc pin to FPGA (underflow)
+
+
+sbit at 0x80+0 bitS_CLK;		// 0x80 is the bit address of PORT A
+sbit at 0x80+1 bitS_OUT;		// out from FX2 point of view
+sbit at 0x80+2 bitS_IN;			// in from FX2 point of view
+
+
+/* all outputs except S_DATA_FROM_PERIPH, FX2_2, FX2_3 */
+
+#define	bmPORT_A_OUTPUTS  (bmPA_S_CLK			\
+			   | bmPA_S_DATA_TO_PERIPH	\
+			   | bmPA_SEN_FPGA		\
+			   | bmPA_SEN_CODEC_A		\
+			   | bmPA_SEN_CODEC_B		\
+			   )
+
+#define	bmPORT_A_INITIAL   (bmPA_SEN_FPGA | bmPA_SEN_CODEC_A | bmPA_SEN_CODEC_B)
+
+
+/* Port B: GPIF	FD[7:0]			*/
+
+/*
+ * Port C (bit addressable):
+ *    5:1 FPGA configuration
+ */
+
+#define	USRP_PC			IOC		// Port C
+#define	USRP_PC_OE		OEC		// Port C direction register
+
+#define	USRP_ALTERA_CONFIG	USRP_PC
+
+#define	bmPC_nRESET		bmBIT0		// reset line to codecs (active low)
+#define bmALTERA_DATA0		bmBIT1
+#define bmALTERA_NCONFIG	bmBIT2
+#define bmALTERA_DCLK		bmBIT3
+#define bmALTERA_CONF_DONE	bmBIT4
+#define bmALTERA_NSTATUS	bmBIT5
+#define	bmPC_LED0		bmBIT6		// active low
+#define	bmPC_LED1		bmBIT7		// active low
+
+sbit at 0xA0+1 bitALTERA_DATA0;		// 0xA0 is the bit address of PORT C
+sbit at 0xA0+3 bitALTERA_DCLK;
+
+
+#define	bmALTERA_BITS		(bmALTERA_DATA0			\
+				 | bmALTERA_NCONFIG		\
+				 | bmALTERA_DCLK		\
+				 | bmALTERA_CONF_DONE		\
+				 | bmALTERA_NSTATUS)
+
+#define	bmPORT_C_OUTPUTS	(bmPC_nRESET			\
+				 | bmALTERA_DATA0 		\
+				 | bmALTERA_NCONFIG		\
+				 | bmALTERA_DCLK		\
+				 | bmPC_LED0			\
+				 | bmPC_LED1			\
+				 )
+
+#define	bmPORT_C_INITIAL	(bmPC_LED0 | bmPC_LED1)
+
+
+#define	USRP_LED_REG		USRP_PC
+#define	bmLED0			bmPC_LED0
+#define	bmLED1			bmPC_LED1
+
+
+/* Port D: GPIF	FD[15:8]		*/
+
+/* Port E: not bit addressible		*/
+
+#define	USRP_PE			IOE		// Port E
+#define	USRP_PE_OE		OEE		// Port E direction register
+
+#define bmPE_PE0		bmBIT0		// GPIF debug output
+#define	bmPE_PE1		bmBIT1		// GPIF debug output
+#define	bmPE_PE2		bmBIT2		// GPIF debug output
+#define	bmPE_FPGA_CLR_STATUS	bmBIT3		// misc pin to FPGA (clear status)
+#define	bmPE_SEN_TX_A		bmBIT4		// serial enable d'board TX A (active low)
+#define	bmPE_SEN_RX_A		bmBIT5		// serial enable d'board RX A (active low)
+#define	bmPE_SEN_TX_B		bmBIT6		// serial enable d'board TX B (active low)
+#define bmPE_SEN_RX_B		bmBIT7		// serial enable d'board RX B (active low)
+
+
+#define	bmPORT_E_OUTPUTS	(bmPE_FPGA_CLR_STATUS	\
+				 | bmPE_SEN_TX_A 	\
+				 | bmPE_SEN_RX_A	\
+				 | bmPE_SEN_TX_B	\
+				 | bmPE_SEN_RX_B	\
+				 )
+
+
+#define	bmPORT_E_INITIAL	(bmPE_SEN_TX_A 		\
+				 | bmPE_SEN_RX_A	\
+				 | bmPE_SEN_TX_B	\
+				 | bmPE_SEN_RX_B	\
+				 )
+
+/*
+ * FPGA output lines that are tied to FX2 RDYx inputs.
+ * These are readable using GPIFREADYSTAT.
+ */
+#define	bmFPGA_HAS_SPACE		bmBIT0	// usbrdy[0] has room for 512 byte packet
+#define	bmFPGA_PKT_AVAIL		bmBIT1	// usbrdy[1] has >= 512 bytes available
+// #define	bmTX_UNDERRUN			bmBIT2  // usbrdy[2] D/A ran out of data
+// #define	bmRX_OVERRUN			bmBIT3	// usbrdy[3] A/D ran out of buffer
+
+/*
+ * FPGA input lines that are tied to the FX2 CTLx outputs.
+ *
+ * These are controlled by the GPIF microprogram...
+ */
+// WR					bmBIT0	// usbctl[0]
+// RD					bmBIT1	// usbctl[1]
+// OE					bmBIT2	// usbctl[2]
+
+#endif /* _USRP_REV1_REGS_H_ */
diff --git a/firmware/fx2/utils/build_eeprom.py b/firmware/fx2/utils/build_eeprom.py
new file mode 100755
index 000000000..76502b923
--- /dev/null
+++ b/firmware/fx2/utils/build_eeprom.py
@@ -0,0 +1,116 @@
+#!/usr/bin/env python
+#
+# Copyright 2004,2006 Free Software Foundation, Inc.
+# 
+# This file is part of GNU Radio
+# 
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+# 
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+# 
+
+import re
+import sys
+import os, os.path
+from optparse import OptionParser
+
+# USB Vendor and Product ID's
+
+USRP1VID = 0xfffe                            # Free Software Folks
+USRP1PID = 0x0002
+USRP1PVID= 0x2500                            # Ettus Research
+USRP1PPID= 0x0002
+    
+def msb (x):
+    return (x >> 8) & 0xff
+
+def lsb (x):
+    return x & 0xff
+
+def build_eeprom_image (filename, rev):
+    """Build a ``C2 Load'' EEPROM image.
+
+    For details on this format, see section 3.4.3 of
+    the EZ-USB FX2 Technical Reference Manual
+    """
+    # get the code we want to run
+    f = open(filename, 'rb')
+    bytes = f.read()
+
+    devid = 4 #for compatibility
+    start_addr = 0 #prove me wrong
+
+    if(rev == 1):
+      VID = USRP1VID
+      PID = USRP1PID
+    else:
+      VID = USRP1PVID
+      PID = USRP1PPID
+
+    rom_header = [
+        0xC2,                           # boot from EEPROM
+        lsb (VID),
+        msb (VID),
+        lsb (PID),
+        msb (PID),
+        lsb (devid),
+        msb (devid),
+        0                               # configuration byte
+        ]
+    
+    # 4 byte header that indicates where to load
+    # the immediately follow code bytes.
+    code_header = [
+        msb (len (bytes)),
+        lsb (len (bytes)),
+        msb (start_addr),
+        lsb (start_addr)
+        ]
+
+    # writes 0 to CPUCS reg (brings FX2 out of reset)
+    trailer = [
+        0x80,
+        0x01,
+        0xe6,
+        0x00,
+        0x00
+        ]
+
+    image = rom_header + code_header + [ord(c) for c in bytes] + trailer
+
+    assert (len (image) <= 256)
+    return image 
+
+if __name__ == '__main__':
+    usage = "usage: %prog -r REV [options] bootfile.bin outfile.bin"
+    parser = OptionParser (usage=usage)
+    parser.add_option ("-r", "--rev", type="int", default=-1,
+                       help="Specify USRP revision, 1 for USRP1, 2 for USRP1P")
+    (options, args) = parser.parse_args ()
+    if len (args) != 2:
+        parser.print_help ()
+        sys.exit (1)
+    if options.rev < 0:
+        sys.stderr.write (
+            "You must specify the USRP revision number (2 or 4) with -r REV\n")
+        sys.exit (1)
+
+    infile = args[0]
+    outfile = args[1]
+
+    image = "".join(chr(c) for c in build_eeprom_image(infile, options.rev))
+
+    f = open(outfile, 'wb')
+    f.write(str(image))
+    f.close()  
diff --git a/firmware/fx2/utils/edit-gpif-b100.py b/firmware/fx2/utils/edit-gpif-b100.py
new file mode 100755
index 000000000..fd949cd8a
--- /dev/null
+++ b/firmware/fx2/utils/edit-gpif-b100.py
@@ -0,0 +1,120 @@
+#!/usr/bin/env python
+# -*- Python -*-
+#
+# Copyright 2003 Free Software Foundation, Inc.
+# 
+# This file is part of GNU Radio
+# 
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+# 
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+# 
+
+
+# Edit the gpif.c file generated by the Cypress GPIF Designer Tool and
+# produce usrp_gpif.c, and usrp_gpif_inline.h, files suitable for our
+# uses.
+
+import re
+import string
+import sys
+
+def check_flow_state (line, flow_state_dict):
+    mo = re.match (r'/\* Wave (\d) FlowStates \*/ (.*),', line)
+    if mo:
+        wave = int (mo.group (1))
+        data = mo.group (2)
+        split = data.split (',', 8)
+        v = map (lambda x : int (x, 16), split)
+        # print "%s, %s" % (wave, data)
+        # print "split: ", split
+        # print "v    : ", v
+        flow_state_dict[wave] = v
+
+
+def delta (xseq, yseq):
+    # set subtraction
+    z = []
+    for x in xseq:
+        if x not in yseq:
+            z.append (x)
+    return z
+    
+
+def write_define (output, name, pairs):
+    output.write ('#define %s()\t\\\n' % name)
+    output.write ('do {\t\t\t\t\t\\\n')
+    for reg, val in pairs:
+        output.write ('%14s = 0x%02x;\t\t\t\\\n' % (reg, val))
+    output.write ('} while (0)\n\n')
+    
+def write_inlines (output, dict):
+    regs = ['FLOWSTATE', 'FLOWLOGIC', 'FLOWEQ0CTL', 'FLOWEQ1CTL', 'FLOWHOLDOFF',
+            'FLOWSTB', 'FLOWSTBEDGE', 'FLOWSTBHPERIOD', 'GPIFHOLDAMOUNT']
+
+    READ_CTRL_FLOW_STATE = 0
+    WRITE_CTRL_FLOW_STATE = 1
+    READ_DATA_FLOW_STATE = 2
+    WRITE_DATA_FLOW_STATE = 3
+
+    read_data_info = zip (regs, dict[READ_DATA_FLOW_STATE])
+    write_data_info = zip (regs, dict[WRITE_DATA_FLOW_STATE])
+    read_ctrl_info = zip (regs, dict[READ_CTRL_FLOW_STATE])
+    write_ctrl_info = zip (regs, dict[WRITE_CTRL_FLOW_STATE])
+    
+    output.write ('''/*
+ * Machine generated by "edit-gpif".  Do not edit by hand.
+ */
+
+''')
+    write_define (output, 'setup_flowstate_common', read_data_info) #assumes that the same registers will change, this isn't really good
+    write_define (output, 'setup_flowstate_data_read', delta (read_data_info, write_data_info))
+    write_define (output, 'setup_flowstate_data_write', delta (write_data_info, read_data_info))
+    write_define (output, 'setup_flowstate_ctrl_read', delta (read_ctrl_info, write_ctrl_info))
+    write_define (output, 'setup_flowstate_ctrl_write', delta (write_ctrl_info, read_ctrl_info))
+    
+
+def edit_gpif (input_name, output_name, inline_name):
+    input = open (input_name, 'r')
+    output = open (output_name, 'w')
+    inline = open (inline_name, 'w')
+    flow_state_dict = {}
+
+    output.write ('''/*
+ * Machine generated by "edit-gpif".  Do not edit by hand.
+ */
+
+''')
+    
+    while 1:
+        line = input.readline ()
+        line = string.replace (line, '\r','')
+        line = re.sub (r' *$', r'', line)
+
+        check_flow_state (line, flow_state_dict)
+
+        line = re.sub (r'#include', r'// #include', line)
+        line = re.sub (r'xdata ', r'', line)
+        if re.search (r'GpifInit', line):
+            break
+        
+        output.write (line)
+
+    output.close ()
+    write_inlines (inline, flow_state_dict)
+    inline.close ()
+
+
+# gpif.c usrp_gpif.c usrp_gpif_inline.h
+edit_gpif (sys.argv[1], sys.argv[2], sys.argv[3])
diff --git a/firmware/fx2/utils/edit-gpif.py b/firmware/fx2/utils/edit-gpif.py
new file mode 100755
index 000000000..5367b75a5
--- /dev/null
+++ b/firmware/fx2/utils/edit-gpif.py
@@ -0,0 +1,114 @@
+#!/usr/bin/env python
+# -*- Python -*-
+#
+# Copyright 2003 Free Software Foundation, Inc.
+# 
+# This file is part of GNU Radio
+# 
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+# 
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+# 
+
+
+# Edit the gpif.c file generated by the Cypress GPIF Designer Tool and
+# produce usrp_gpif.c, and usrp_gpif_inline.h, files suitable for our
+# uses.
+
+import re
+import string
+import sys
+
+def check_flow_state (line, flow_state_dict):
+    mo = re.match (r'/\* Wave (\d) FlowStates \*/ (.*),', line)
+    if mo:
+        wave = int (mo.group (1))
+        data = mo.group (2)
+        split = data.split (',', 8)
+        v = map (lambda x : int (x, 16), split)
+        # print "%s, %s" % (wave, data)
+        # print "split: ", split
+        # print "v    : ", v
+        flow_state_dict[wave] = v
+
+
+def delta (xseq, yseq):
+    # set subtraction
+    z = []
+    for x in xseq:
+        if x not in yseq:
+            z.append (x)
+    return z
+    
+
+def write_define (output, name, pairs):
+    output.write ('#define %s()\t\\\n' % name)
+    output.write ('do {\t\t\t\t\t\\\n')
+    for reg, val in pairs:
+        output.write ('%14s = 0x%02x;\t\t\t\\\n' % (reg, val))
+    output.write ('} while (0)\n\n')
+    
+def write_inlines (output, dict):
+    regs = ['FLOWSTATE', 'FLOWLOGIC', 'FLOWEQ0CTL', 'FLOWEQ1CTL', 'FLOWHOLDOFF',
+            'FLOWSTB', 'FLOWSTBEDGE', 'FLOWSTBHPERIOD', 'GPIFHOLDAMOUNT']
+
+    READ_FLOW_STATE = 2
+    WRITE_FLOW_STATE = 3
+
+    read_info = zip (regs, dict[READ_FLOW_STATE])
+    write_info = zip (regs, dict[WRITE_FLOW_STATE])
+    
+    output.write ('''/*
+ * Machine generated by "edit-gpif".  Do not edit by hand.
+ */
+
+''')
+    write_define (output, 'setup_flowstate_common', read_info)
+    write_define (output, 'setup_flowstate_read', delta (read_info, write_info))
+    write_define (output, 'setup_flowstate_write', delta (write_info, read_info))
+    
+
+def edit_gpif (input_name, output_name, inline_name):
+    input = open (input_name, 'r')
+    output = open (output_name, 'w')
+    inline = open (inline_name, 'w')
+    flow_state_dict = {}
+
+    output.write ('''/*
+ * Machine generated by "edit-gpif".  Do not edit by hand.
+ */
+
+''')
+    
+    while 1:
+        line = input.readline ()
+        line = string.replace (line, '\r','')
+        line = re.sub (r' *$', r'', line)
+
+        check_flow_state (line, flow_state_dict)
+
+        line = re.sub (r'#include', r'// #include', line)
+        line = re.sub (r'xdata ', r'', line)
+        if re.search (r'GpifInit', line):
+            break
+        
+        output.write (line)
+
+    output.close ()
+    write_inlines (inline, flow_state_dict)
+    inline.close ()
+
+
+# gpif.c usrp_gpif.c usrp_gpif_inline.h
+edit_gpif (sys.argv[1], sys.argv[2], sys.argv[3])
diff --git a/firmware/fx2/utils/generate_regs.py b/firmware/fx2/utils/generate_regs.py
new file mode 100755
index 000000000..656cd5e81
--- /dev/null
+++ b/firmware/fx2/utils/generate_regs.py
@@ -0,0 +1,57 @@
+#!/usr/bin/env python
+
+import os, os.path
+import re
+import sys
+
+
+# set srcdir to the directory that contains Makefile.am
+try:
+    srcdir = os.environ['srcdir']
+except KeyError, e:
+    srcdir = "."
+srcdir = srcdir + '/'
+
+def open_src (name, mode):
+    global srcdir
+    return open (os.path.join (srcdir, name), mode)
+
+
+def generate_fpga_regs (h_filename, v_filename):
+    const_width = 7                  # bit width of constants
+    
+    h_file = open_src (h_filename, 'r')
+    v_file = open (v_filename, 'w')
+    v_file.write (
+    '''//
+// This file is machine generated from %s
+// Do not edit by hand; your edits will be overwritten.
+//
+''' % (h_filename,))
+
+    pat = re.compile (r'^#define\s*(FR_\w*)\s*(\w*)(.*)$')
+    pat_bitno = re.compile (r'^#define\s*(bitno\w*)\s*(\w*)(.*)$')
+    pat_bm = re.compile (r'^#define\s*(bm\w*)\s*(\w*)(.*)$')
+    for line in h_file:
+        if re.match ('//|\s*$', line):  # comment or blank line
+            v_file.write (line)
+        mo = pat.search (line)
+        mo_bitno =pat_bitno.search (line)
+        mo_bm =pat_bm.search (line)
+        if mo:
+            v_file.write ('`define %-25s %d\'d%s%s\n' % (
+                mo.group (1), const_width, mo.group (2), mo.group (3)))
+        elif mo_bitno:
+            v_file.write ('`define %-25s %s%s\n' % (
+                mo_bitno.group (1), mo_bitno.group (2), mo_bitno.group (3)))
+        elif mo_bm:
+            v_file.write ('`define %-25s %s%s\n' % (
+                mo_bm.group (1), mo_bm.group (2), mo_bm.group (3)))
+    
+
+if __name__ == '__main__':
+    if len (sys.argv) != 3:
+        sys.stderr.write ('usage: %s file.h file.v\n' % (sys.argv[0]))
+        sys.exit (1)
+    generate_fpga_regs (sys.argv[1], sys.argv[2])
+