aboutsummaryrefslogtreecommitdiffstats
path: root/firmware/fx2
diff options
context:
space:
mode:
Diffstat (limited to 'firmware/fx2')
-rw-r--r--firmware/fx2/b100/usrp_common.c17
-rw-r--r--firmware/fx2/b100/usrp_main.c159
-rw-r--r--firmware/fx2/b100/usrp_regs.h28
-rw-r--r--firmware/fx2/common/fx2regs.h17
4 files changed, 59 insertions, 162 deletions
diff --git a/firmware/fx2/b100/usrp_common.c b/firmware/fx2/b100/usrp_common.c
index 4b6dde881..7aedce9f7 100644
--- a/firmware/fx2/b100/usrp_common.c
+++ b/firmware/fx2/b100/usrp_common.c
@@ -32,12 +32,11 @@ init_usrp (void)
CPUCS = bmCLKSPD1; // CPU runs @ 48 MHz
CKCON = 0; // MOVX takes 2 cycles
- // IFCLK is generated internally and runs at 48 MHz; GPIF "master mode"
-
- IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFCLKPOL | bmIFGPIF;
+ // IFCLK is generated internally and runs at 48 MHz; slave FIFO mode
+ IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFSLAVE;
SYNCDELAY;
- // configure IO ports (B and D are used by GPIF)
+ // configure IO ports (B and D are used by slave FIFO)
IOA = bmPORT_A_INITIAL; // Port A initial state
OEA = bmPORT_A_OUTPUTS; // Port A direction register
@@ -77,23 +76,25 @@ init_usrp (void)
EP2FIFOCFG = bmWORDWIDE; SYNCDELAY;
EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE; SYNCDELAY;
- EP6FIFOCFG = bmZEROLENIN | bmWORDWIDE; SYNCDELAY;
+ EP6FIFOCFG = bmZEROLENIN | bmWORDWIDE; SYNCDELAY;
+ EP6FIFOCFG = bmZEROLENIN | bmAUTOIN | bmWORDWIDE; SYNCDELAY;
//EP6FIFOCFG = bmWORDWIDE; SYNCDELAY;
EP4FIFOCFG = bmWORDWIDE; SYNCDELAY;
EP4FIFOCFG = bmAUTOOUT | bmWORDWIDE; SYNCDELAY;
- EP8FIFOCFG = bmAUTOIN | bmWORDWIDE; SYNCDELAY;
+ EP8FIFOCFG = bmZEROLENIN | bmWORDWIDE; SYNCDELAY;
+ EP8FIFOCFG = bmZEROLENIN | bmAUTOIN | bmWORDWIDE; SYNCDELAY;
EP0BCH = 0; SYNCDELAY;
// arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
EP1OUTBC = 0; SYNCDELAY;
-
+/*
EP2GPIFFLGSEL = 0x00; SYNCDELAY; // For EP2OUT, GPIF uses EF flag
EP6GPIFFLGSEL = 0x00; SYNCDELAY; // For EP6IN, GPIF uses FF flag
EP4GPIFFLGSEL = 0x00; SYNCDELAY;
EP8GPIFFLGSEL = 0x00; SYNCDELAY;
-
+*/
// set autoin length for EP6
// FIXME should be f(enumeration)
diff --git a/firmware/fx2/b100/usrp_main.c b/firmware/fx2/b100/usrp_main.c
index 391a6d94f..45fa60ae9 100644
--- a/firmware/fx2/b100/usrp_main.c
+++ b/firmware/fx2/b100/usrp_main.c
@@ -21,7 +21,6 @@
#include "usrp_common.h"
#include "usrp_commands.h"
#include "fpga.h"
-#include "usrp_gpif_inline.h"
#include "timer.h"
#include "i2c.h"
#include "isr.h"
@@ -64,7 +63,7 @@ bit enable_gpif = 0;
#define USRP_HASH_SIZE 16
xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
-void clear_fpga_data_fifo(void);
+//void clear_fpga_data_fifo(void);
static void
get_ep0_data (void)
@@ -175,12 +174,10 @@ app_vendor_cmd (void)
break;
case VRQ_ENABLE_GPIF:
- enable_gpif = (wValueL != 0) ? 1 : 0;
- set_led_1(enable_gpif);
break;
case VRQ_CLEAR_FPGA_FIFO:
- clear_fpga_data_fifo();
+ //clear_fpga_data_fifo();
break;
default:
@@ -194,125 +191,12 @@ app_vendor_cmd (void)
return 1;
}
-static int short_pkt_state = 0;
-#define SHORT_PACKET_DETECTED (short_pkt_state != bitSHORT_PACKET_SIGNAL)
-
-//yes, this is a little opaque
-//basically this is necessary because while all the logic to inform the FPGA
-//of what we're trying to do via the CTL pins is contained within the flowstates,
-//we need to assert the endpoint select pin one clock cycle before the flowstate starts.
-//this is the job of the wave descriptor. rather than switch between waves, since that
-//involves a little more setup, we just modify the wave table on the fly.
-inline static void setup_wave_data_read(void) {
- GPIF_WAVE_DATA[80] = 0x06;
- GPIF_WAVE_DATA[81] = 0x06;
-}
-
-inline static void setup_wave_ctrl_read(void) {
- GPIF_WAVE_DATA[80] = 0x0E;
- GPIF_WAVE_DATA[81] = 0x0E;
-}
-
-inline static void setup_wave_data_write(void) {
- GPIF_WAVE_DATA[112] = 0x00;
- GPIF_WAVE_DATA[113] = 0x00;
-}
-
-inline static void setup_wave_ctrl_write(void) {
- GPIF_WAVE_DATA[112] = 0x08;
- GPIF_WAVE_DATA[113] = 0x08;
-}
-
-inline static void handle_data_write(void) {
- GPIFTCB1 = 0x01; //SYNCDELAY;
- GPIFTCB0 = 0x00;
- setup_flowstate_data_write ();
- setup_wave_data_write();
- GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; // start the xfer
- SYNCDELAY;
- while (!(GPIFTRIG & bmGPIF_IDLE));
-}
-
-inline static void handle_ctrl_write(void) {
- GPIFTCB1 = 0x00;
- GPIFTCB0 = 0x10;
- setup_flowstate_ctrl_write ();
- setup_wave_ctrl_write();
- GPIFTRIG = bmGPIF_EP4_START | bmGPIF_WRITE; // start the xfer
- SYNCDELAY;
- while (!(GPIFTRIG & bmGPIF_IDLE));
-}
-
-inline static void handle_data_read(void) {
- GPIFTCB1 = 0x01;
- GPIFTCB0 = 0x00;
- setup_flowstate_data_read ();
- setup_wave_data_read();
- short_pkt_state = bitSHORT_PACKET_SIGNAL;
- GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; // start the xfer
- SYNCDELAY;
- while (!(GPIFTRIG & bmGPIF_IDLE));
- INPKTEND = 0x06; // tell USB we filled buffer (6 is our endpoint num)
- SYNCDELAY;
- if(SHORT_PACKET_DETECTED) {
- while(!(EP6CS & bmEPEMPTY)); //wait for packet to send
- INPKTEND = 0x06; //send a ZLP
- //toggle_led_1(); //FIXME DEBUG
- }
-}
-
-inline static void handle_ctrl_read(void) {
- GPIFTCB1 = 0x00;
- GPIFTCB0 = 0x10;
- setup_flowstate_ctrl_read ();
- setup_wave_ctrl_read();
- GPIFTRIG = bmGPIF_EP8_START | bmGPIF_READ; // start the xfer
- SYNCDELAY;
- while (!(GPIFTRIG & bmGPIF_IDLE));
- INPKTEND = 8; // tell USB we filled buffer (8 is our endpoint num)
-}
-
-//clear the FPGA datapath by reading but not submitting, instead clearing the FIFO after each transaction
-void clear_fpga_data_fifo(void) {
- while(fpga_has_data_packet_avail()) {
- GPIFTCB1 = 0x01;
- GPIFTCB0 = 0x00;
- setup_flowstate_data_read ();
- setup_wave_data_read();
- GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; // start the xfer
- SYNCDELAY;
- while (!(GPIFTRIG & bmGPIF_IDLE));
- initialize_gpif_buffer(6); //reset the FIFO instead of committing it
- }
-}
-
static void
main_loop (void)
{
while (1){
if (usb_setup_packet_avail ())
usb_handle_setup_packet ();
-
- if(enable_gpif){
- if (fx2_has_ctrl_packet_avail() && fpga_has_room_for_ctrl_packet()) handle_ctrl_write();
- if (fx2_has_room_for_ctrl_packet() && fpga_has_ctrl_packet_avail()) handle_ctrl_read();
-
- //we do this
- if (fx2_has_data_packet_avail() && fpga_has_room_for_data_packet()) handle_data_write();
- if (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail()) handle_data_read();
- //five times so that
- if (fx2_has_data_packet_avail() && fpga_has_room_for_data_packet()) handle_data_write();
- if (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail()) handle_data_read();
- //we can piggyback
- if (fx2_has_data_packet_avail() && fpga_has_room_for_data_packet()) handle_data_write();
- if (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail()) handle_data_read();
- //data transfers
- if (fx2_has_data_packet_avail() && fpga_has_room_for_data_packet()) handle_data_write();
- if (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail()) handle_data_read();
- //without loop overhead
- if (fx2_has_data_packet_avail() && fpga_has_room_for_data_packet()) handle_data_write();
- if (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail()) handle_data_read();
- }
}
}
@@ -363,15 +247,9 @@ patch_usb_descriptors(void)
void
main (void)
{
- enable_gpif = 0;
-
memset (hash1, 0, USRP_HASH_SIZE); // zero fpga bitstream hash. This forces reload
init_usrp ();
- init_gpif ();
-
- // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED)
- //IFCONFIG |= bmGSTATE; // no conflict, start with it on
set_led_0 (0);
set_led_1 (0);
@@ -389,6 +267,37 @@ main (void)
fx2_renumerate (); // simulates disconnect / reconnect
- setup_flowstate_common();
+// setup_flowstate_common();
+
+//set up gpif slave mode here
+ //set slave FIFO mode
+ //set synchronous slave mode
+ ////both done in init_usrp()
+
+ //set FLAGA, FLAGB, FLAGC, FLAGD to be EP2EF, EP4EF, EP6PF, EP8PF
+ PINFLAGSAB = (bmEP2EF) | (bmEP4EF << 4);
+ PINFLAGSCD = (bmEP6PF) | (bmEP8PF << 4);
+
+ //ok as far as i can tell, DECIS is reversed compared to the FX2 TRM.
+ //p15.34 says DECIS high implements [assert when (fill > level)], observed opposite
+
+ EP6FIFOPFH = 0x09;
+ SYNCDELAY;
+ EP6FIFOPFL = 0xFD;
+ SYNCDELAY;
+
+// EP2FIFOPFH = 0x08;
+// SYNCDELAY;
+// EP2FIFOPFL = 0x00;
+// SYNCDELAY;
+
+ //assert FIFOEMPTY one cycle sooner so we get it in time at the FPGA
+ EP2FIFOCFG |= bmBIT5;
+
+ //set FIFOPINPOLAR to normal (active low) mode
+ FIFOPINPOLAR = 0x00;
+ SYNCDELAY;
+ PORTACFG = 0x80;
+
main_loop ();
}
diff --git a/firmware/fx2/b100/usrp_regs.h b/firmware/fx2/b100/usrp_regs.h
index f6695d9f9..3d65337f5 100644
--- a/firmware/fx2/b100/usrp_regs.h
+++ b/firmware/fx2/b100/usrp_regs.h
@@ -41,8 +41,6 @@
#define bmALTERA_NCONFIG bmBIT1
#define bmALTERA_DATA0 bmBIT3
#define bmALTERA_NSTATUS bmBIT4
-#define bmRESET_FPGA_FIFOS bmBIT7
-
#define bmALTERA_BITS (bmALTERA_DCLK \
| bmALTERA_NCONFIG \
@@ -64,7 +62,6 @@
sbit at PORT_A_ADDR+0 bitALTERA_DCLK; // 0x80 is the bit address of PORT A
sbit at PORT_A_ADDR+1 bitALTERA_NCONFIG;
sbit at PORT_A_ADDR+3 bitALTERA_DATA0;
-sbit at PORT_A_ADDR+6 bitSHORT_PACKET_SIGNAL;
sbit at PORT_C_ADDR+7 bitALTERA_CONF_DONE;
@@ -102,29 +99,4 @@ sbit at PORT_C_ADDR+7 bitALTERA_CONF_DONE;
#define bmPORT_E_OUTPUTS (0)
#define bmPORT_E_INITIAL (0)
-/*
- * FPGA output lines that are tied to FX2 RDYx inputs.
- * These are readable using GPIFREADYSTAT.
- */
-//#define bmFPGA_HAS_SPACE bmBIT0 // usbrdy[0] has room for 512 byte packet
-//#define bmFPGA_PKT_AVAIL bmBIT1 // usbrdy[1] has >= 512 bytes available
-
-#define bmDATA_EMPTY bmBIT0 //data output FIFO has no data ready
-#define bmDATA_FIFO_FULL bmBIT1 //data input FIFO is full
-#define bmCTRL_EMPTY bmBIT2 //control output FIFO has no data ready
-#define bmCTRL_FIFO_FULL bmBIT3 //control input FIFO is full
-
-// #define bmTX_UNDERRUN bmBIT2 // usbrdy[2] D/A ran out of data
-// #define bmRX_OVERRUN bmBIT3 // usbrdy[3] A/D ran out of buffer
-
-/*
- * FPGA input lines that are tied to the FX2 CTLx outputs.
- *
- * These are controlled by the GPIF microprogram...
- */
-// WE bmBIT0 // usbctl[0] write enable
-// RE bmBIT1 // usbctl[1] read enable
-// OE bmBIT2 // usbctl[2] output enable
-// EP bmBIT3 // usbctl[3] endpoint select (data/ctrl)
-
#endif /* _USRP_REV1_REGS_H_ */
diff --git a/firmware/fx2/common/fx2regs.h b/firmware/fx2/common/fx2regs.h
index aa44791d0..acbc0b89e 100644
--- a/firmware/fx2/common/fx2regs.h
+++ b/firmware/fx2/common/fx2regs.h
@@ -91,7 +91,6 @@ EXTERN xdata _AT_(0xE60A) volatile BYTE REVID ; // Chip Revision
EXTERN xdata _AT_(0xE60B) volatile BYTE REVCTL ; // Chip Revision Control
// Endpoint Configuration
-
EXTERN xdata _AT_(0xE610) volatile BYTE EP1OUTCFG ; // Endpoint 1-OUT Configuration
EXTERN xdata _AT_(0xE611) volatile BYTE EP1INCFG ; // Endpoint 1-IN Configuration
EXTERN xdata _AT_(0xE612) volatile BYTE EP2CFG ; // Endpoint 2 Configuration
@@ -654,6 +653,22 @@ sfr at 0xF8 EIP; // EIP Bit Values differ from Reg320
#define bmIFCFG0 bmBIT0
#define bmIFCFGMASK (bmIFCFG0 | bmIFCFG1)
#define bmIFGPIF bmIFCFG1
+#define bmIFSLAVE (bmIFCFG0 | bmIFCFG1)
+
+/* Slave FIFO pin flags configuration bits (PINFLAGS) */
+#define bmINDEXED 0x0 //which fifo selected by FIFOADR
+#define bmEP2PF 0x4
+#define bmEP4PF 0x5
+#define bmEP6PF 0x6
+#define bmEP8PF 0x7
+#define bmEP2EF 0x8
+#define bmEP4EF 0x9
+#define bmEP6EF 0xA
+#define bmEP8EF 0xB
+#define bmEP2FF 0xC
+#define bmEP4FF 0xD
+#define bmEP6FF 0xE
+#define bmEP8FF 0xF
/* EP 2468 FIFO Configuration bits (EP2FIFOCFG,EP4FIFOCFG,EP6FIFOCFG,EP8FIFOCFG) */
#define bmINFM bmBIT6
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 12:14:00 +0000