diff options
Diffstat (limited to 'firmware/fx2/src/usrp1')
26 files changed, 3138 insertions, 0 deletions
diff --git a/firmware/fx2/src/usrp1/.gitignore b/firmware/fx2/src/usrp1/.gitignore new file mode 100644 index 000000000..54a9e9415 --- /dev/null +++ b/firmware/fx2/src/usrp1/.gitignore @@ -0,0 +1,20 @@ +/*.ihx +/*.lnk +/*.lst +/*.map +/*.mem +/*.rel +/*.rst +/*.sym +/blink_leds.asm +/usrp_common.asm +/command_loop.asm +/fpga.asm +/*.asm +/Makefile +/Makefile.in +/usrp_gpif.c +/usrp_gpif_inline.h +/Makefile.in +/burn-usrp2-eeprom +/burn-usrp4-eeprom diff --git a/firmware/fx2/src/usrp1/Makefile.am b/firmware/fx2/src/usrp1/Makefile.am new file mode 100644 index 000000000..5586e83a3 --- /dev/null +++ b/firmware/fx2/src/usrp1/Makefile.am @@ -0,0 +1,171 @@ +# +# Copyright 2003,2006 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +firmware2dir = $(prefix)/share/usrp/rev2 +firmware2_DATA = std.ihx + +# we put the same stuff in the rev4 directory +firmware4dir = $(prefix)/share/usrp/rev4 +firmware4_DATA = std.ihx + +EXTRA_DIST = \ + edit-gpif \ + _startup.a51 \ + blink_leds.c \ + board_specific.c \ + check_mdelay.c \ + check_udelay.c \ + eeprom_boot.a51 \ + eeprom_init.c \ + eeprom_io.c \ + eeprom_io.h \ + fpga_load.c \ + fpga_rev2.c \ + fpga_rev2.h \ + gpif.c \ + init_gpif.c \ + spi.c \ + spi.h \ + usb_descriptors.a51 \ + usrp_common.c \ + usrp_common.h \ + usrp_gpif.c \ + usrp_main.c \ + usrp_rev2_regs.h \ + vectors.a51 + + +DEFINES=-DHAVE_USRP2 +FW_INCLUDES=-I$(top_srcdir)/include \ + -I$(top_srcdir)/src/usrp1 \ + -I$(top_srcdir)/src/common \ + -I$(top_builddir)/src/common + +# with EA = 0, the FX2 implements a portion of the 8051 "external memory" +# on chip. This memory is mapped like this: +# +# The bottom 8K of memory (0x0000 - 0x1fff) is used for both data and +# code accesses. There's also 512 bytes for data only from 0xe000 - 0xe1ff. +# +# We tell the linker to start the xdata segment at 0x1800, 6K up from +# the bottom. + +MEMOPTS = --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 \ + -Wl '-b USBDESCSEG = 0xE000' + +LIBOPTS = -L ../../lib libfx2.lib +LIBDEP = ../../lib/libfx2.lib + +LINKOPTS = $(MEMOPTS) $(LIBOPTS) + +EXECUTABLES = \ + std.ihx \ + blink_leds.ihx \ + check_mdelay.ihx \ + check_udelay.ihx \ + eeprom_boot.ihx + +STARTUP = _startup.rel + +noinst_SCRIPTS = \ + burn-usrp2-eeprom \ + burn-usrp4-eeprom + + +.c.rel: + $(XCC) $(FW_INCLUDES) $(DEFINES) \ + -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< + +.a51.rel: + test -f `basename '$<'` || $(LN_S) '$<' . + test -f ../common/`basename '$<'` -o \ + \! -f `dirname '$<'`/../common/`basename '$<'` \ + || $(LN_S) `dirname '$<'`/../common/`basename '$<'` ../common/`basename '$<'` + $(XAS) `basename '$<'` + + +EEPROM_BOOT_OBJS = eeprom_boot.rel eeprom_init.rel $(STARTUP) + +eeprom_boot.ihx: $(EEPROM_BOOT_OBJS) $(LIBDEP) + $(XCC) $(LINKOPTS) -o $@ $(EEPROM_BOOT_OBJS) + +burn-usrp2-eeprom: eeprom_boot.ihx + $(PYTHON) $(srcdir)/../common/build_eeprom.py -r2 eeprom_boot.ihx > $@ + chmod +x $@ + +burn-usrp4-eeprom: eeprom_boot.ihx + $(PYTHON) $(srcdir)/../common/build_eeprom.py -r4 eeprom_boot.ihx > $@ + chmod +x $@ + + +BLINK_LEDS_OBJS = blink_leds.rel usrp_common.rel board_specific.rel spi.rel $(STARTUP) + +blink_leds.ihx: $(BLINK_LEDS_OBJS) $(LIBDEP) + $(XCC) $(LINKOPTS) -o $@ $(BLINK_LEDS_OBJS) + + +CHECK_MDELAY_OBJS = check_mdelay.rel usrp_common.rel board_specific.rel spi.rel $(STARTUP) + +check_mdelay.ihx: $(CHECK_MDELAY_OBJS) $(LIBDEP) + $(XCC) $(LINKOPTS) -o $@ $(CHECK_MDELAY_OBJS) + + + +CHECK_UDELAY_OBJS = check_udelay.rel usrp_common.rel board_specific.rel spi.rel $(STARTUP) + +check_udelay.ihx: $(CHECK_UDELAY_OBJS) $(LIBDEP) + $(XCC) $(LINKOPTS) -o $@ $(CHECK_UDELAY_OBJS) + + + +USRP_OBJS = \ + vectors.rel \ + usrp_main.rel usrp_common.rel board_specific.rel \ + fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel \ + usb_descriptors.rel spi.rel eeprom_io.rel $(STARTUP) + +std.ihx: $(USRP_OBJS) $(LIBDEP) + $(XCC) $(LINKOPTS) -o $@ $(USRP_OBJS) + +CLEANFILES = \ + *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib \ + usrp_gpif.c usrp_gpif_inline.h \ + burn-usrp2-eeprom \ + burn-usrp4-eeprom + +DISTCLEANFILES = \ + *.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib + +# build gpif stuff + +all: usrp_gpif.c + +usrp_gpif.c usrp_gpif_inline.h : gpif.c + srcdir=$(srcdir) $(PYTHON) $(srcdir)/edit-gpif $(srcdir)/gpif.c usrp_gpif.c usrp_gpif_inline.h + + +# dependencies + +usrp_main.rel: usrp_gpif_inline.h +#usrp_main.rel: fpga.h usrp_common.h ../../include/usrp_commands.h usrp_gpif_inline.h ../../include/usrp_config.h usrp_rev2_regs.h ../../include/fx2regs.h +#usrp_common.rel: usrp_common.h ../../include/usrp_commands.h ../../include/usrp_config.h usrp_rev2_regs.h ../../include/fx2regs.h +#fpga.rel: usrp_common.h ../../include/usrp_commands.h fpga.h ../../include/usrp_config.h usrp_rev2_regs.h ../../include/fx2regs.h +#init_gpif.rel: usrp_common.h ../../include/usrp_config.h usrp_rev2_regs.h ../../include/fx2regs.h diff --git a/firmware/fx2/src/usrp1/_startup.a51 b/firmware/fx2/src/usrp1/_startup.a51 new file mode 100644 index 000000000..4f5309922 --- /dev/null +++ b/firmware/fx2/src/usrp1/_startup.a51 @@ -0,0 +1 @@ + .include "../common/_startup.a51" diff --git a/firmware/fx2/src/usrp1/blink_leds.c b/firmware/fx2/src/usrp1/blink_leds.c new file mode 100644 index 000000000..c633d5d48 --- /dev/null +++ b/firmware/fx2/src/usrp1/blink_leds.c @@ -0,0 +1 @@ +#include "../common/blink_leds.c" diff --git a/firmware/fx2/src/usrp1/board_specific.c b/firmware/fx2/src/usrp1/board_specific.c new file mode 100644 index 000000000..ef0081d84 --- /dev/null +++ b/firmware/fx2/src/usrp1/board_specific.c @@ -0,0 +1,113 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "usrp_common.h" +#include "spi.h" + +void +set_led_0 (unsigned char on) +{ + if (!on) // active low + USRP_PC |= bmPC_LED0; + else + USRP_PC &= ~bmPC_LED0; +} + +void +set_led_1 (unsigned char on) +{ + if (!on) // active low + USRP_PC |= bmPC_LED1; + else + USRP_PC &= ~bmPC_LED1; +} + +void +toggle_led_0 (void) +{ + USRP_PC ^= bmPC_LED0; +} + +void +toggle_led_1 (void) +{ + USRP_PC ^= bmPC_LED1; +} + +void +la_trace_init (void) +{ +} + +void +set_sleep_bits (unsigned char bits, unsigned char mask) +{ + // NOP on usrp1 +} + +static xdata unsigned char xbuf[1]; + +void +write_9862 (unsigned char which, unsigned char regno, unsigned char value) +{ + xbuf[0] = value; + + spi_write (0, regno & 0x3f, + which == 0 ? SPI_ENABLE_CODEC_A : SPI_ENABLE_CODEC_B, + SPI_FMT_MSB | SPI_FMT_HDR_1, + xbuf, 1); +} + +void +write_both_9862s (unsigned char regno, unsigned char value) +{ + xbuf[0] = value; + + spi_write (0, regno & 0x3f, + SPI_ENABLE_CODEC_A | SPI_ENABLE_CODEC_B, + SPI_FMT_MSB | SPI_FMT_HDR_1, + xbuf, 1); +} + +#define REG_RX_PWR_DN 1 +#define REG_TX_PWR_DN 8 +#define REG_TX_MODULATOR 20 + +static void +power_down_9862s (void) +{ + write_both_9862s (REG_RX_PWR_DN, 0x01); + write_both_9862s (REG_TX_PWR_DN, 0x0f); // pwr dn digital and analog_both + write_both_9862s (REG_TX_MODULATOR, 0x00); // coarse & fine modulators disabled +} + +void +init_board (void) +{ + la_trace_init (); + init_spi (); + + USRP_PC &= ~bmPC_nRESET; // active low reset + USRP_PC |= bmPC_nRESET; + + power_down_9862s (); +} diff --git a/firmware/fx2/src/usrp1/check_mdelay.c b/firmware/fx2/src/usrp1/check_mdelay.c new file mode 100644 index 000000000..ea4ccdb14 --- /dev/null +++ b/firmware/fx2/src/usrp1/check_mdelay.c @@ -0,0 +1 @@ +#include "../common/check_mdelay.c" diff --git a/firmware/fx2/src/usrp1/check_udelay.c b/firmware/fx2/src/usrp1/check_udelay.c new file mode 100644 index 000000000..d01622e5e --- /dev/null +++ b/firmware/fx2/src/usrp1/check_udelay.c @@ -0,0 +1 @@ +#include "../common/check_udelay.c" diff --git a/firmware/fx2/src/usrp1/edit-gpif b/firmware/fx2/src/usrp1/edit-gpif new file mode 100755 index 000000000..5367b75a5 --- /dev/null +++ b/firmware/fx2/src/usrp1/edit-gpif @@ -0,0 +1,114 @@ +#!/usr/bin/env python +# -*- Python -*- +# +# Copyright 2003 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + + +# Edit the gpif.c file generated by the Cypress GPIF Designer Tool and +# produce usrp_gpif.c, and usrp_gpif_inline.h, files suitable for our +# uses. + +import re +import string +import sys + +def check_flow_state (line, flow_state_dict): + mo = re.match (r'/\* Wave (\d) FlowStates \*/ (.*),', line) + if mo: + wave = int (mo.group (1)) + data = mo.group (2) + split = data.split (',', 8) + v = map (lambda x : int (x, 16), split) + # print "%s, %s" % (wave, data) + # print "split: ", split + # print "v : ", v + flow_state_dict[wave] = v + + +def delta (xseq, yseq): + # set subtraction + z = [] + for x in xseq: + if x not in yseq: + z.append (x) + return z + + +def write_define (output, name, pairs): + output.write ('#define %s()\t\\\n' % name) + output.write ('do {\t\t\t\t\t\\\n') + for reg, val in pairs: + output.write ('%14s = 0x%02x;\t\t\t\\\n' % (reg, val)) + output.write ('} while (0)\n\n') + +def write_inlines (output, dict): + regs = ['FLOWSTATE', 'FLOWLOGIC', 'FLOWEQ0CTL', 'FLOWEQ1CTL', 'FLOWHOLDOFF', + 'FLOWSTB', 'FLOWSTBEDGE', 'FLOWSTBHPERIOD', 'GPIFHOLDAMOUNT'] + + READ_FLOW_STATE = 2 + WRITE_FLOW_STATE = 3 + + read_info = zip (regs, dict[READ_FLOW_STATE]) + write_info = zip (regs, dict[WRITE_FLOW_STATE]) + + output.write ('''/* + * Machine generated by "edit-gpif". Do not edit by hand. + */ + +''') + write_define (output, 'setup_flowstate_common', read_info) + write_define (output, 'setup_flowstate_read', delta (read_info, write_info)) + write_define (output, 'setup_flowstate_write', delta (write_info, read_info)) + + +def edit_gpif (input_name, output_name, inline_name): + input = open (input_name, 'r') + output = open (output_name, 'w') + inline = open (inline_name, 'w') + flow_state_dict = {} + + output.write ('''/* + * Machine generated by "edit-gpif". Do not edit by hand. + */ + +''') + + while 1: + line = input.readline () + line = string.replace (line, '\r','') + line = re.sub (r' *$', r'', line) + + check_flow_state (line, flow_state_dict) + + line = re.sub (r'#include', r'// #include', line) + line = re.sub (r'xdata ', r'', line) + if re.search (r'GpifInit', line): + break + + output.write (line) + + output.close () + write_inlines (inline, flow_state_dict) + inline.close () + + +# gpif.c usrp_gpif.c usrp_gpif_inline.h +edit_gpif (sys.argv[1], sys.argv[2], sys.argv[3]) diff --git a/firmware/fx2/src/usrp1/eeprom_boot.a51 b/firmware/fx2/src/usrp1/eeprom_boot.a51 new file mode 100644 index 000000000..65e452668 --- /dev/null +++ b/firmware/fx2/src/usrp1/eeprom_boot.a51 @@ -0,0 +1,573 @@ +;-------------------------------------------------------- +; Hand tweaked minimal eeprom boot code +;-------------------------------------------------------- + .module eeprom_boot + .optsdcc -mmcs51 --model-small + +;-------------------------------------------------------- +; Public variables in this module +;-------------------------------------------------------- + .globl _eeprom_init + .globl _EP8FIFOBUF + .globl _EP6FIFOBUF + .globl _EP4FIFOBUF + .globl _EP2FIFOBUF + .globl _EP1INBUF + .globl _EP1OUTBUF + .globl _EP0BUF + .globl _CT4 + .globl _CT3 + .globl _CT2 + .globl _CT1 + .globl _USBTEST + .globl _TESTCFG + .globl _DBUG + .globl _UDMACRCQUAL + .globl _UDMACRCL + .globl _UDMACRCH + .globl _GPIFHOLDAMOUNT + .globl _FLOWSTBHPERIOD + .globl _FLOWSTBEDGE + .globl _FLOWSTB + .globl _FLOWHOLDOFF + .globl _FLOWEQ1CTL + .globl _FLOWEQ0CTL + .globl _FLOWLOGIC + .globl _FLOWSTATE + .globl _GPIFABORT + .globl _GPIFREADYSTAT + .globl _GPIFREADYCFG + .globl _XGPIFSGLDATLNOX + .globl _XGPIFSGLDATLX + .globl _XGPIFSGLDATH + .globl _EP8GPIFTRIG + .globl _EP8GPIFPFSTOP + .globl _EP8GPIFFLGSEL + .globl _EP6GPIFTRIG + .globl _EP6GPIFPFSTOP + .globl _EP6GPIFFLGSEL + .globl _EP4GPIFTRIG + .globl _EP4GPIFPFSTOP + .globl _EP4GPIFFLGSEL + .globl _EP2GPIFTRIG + .globl _EP2GPIFPFSTOP + .globl _EP2GPIFFLGSEL + .globl _GPIFTCB0 + .globl _GPIFTCB1 + .globl _GPIFTCB2 + .globl _GPIFTCB3 + .globl _GPIFADRL + .globl _GPIFADRH + .globl _GPIFCTLCFG + .globl _GPIFIDLECTL + .globl _GPIFIDLECS + .globl _GPIFWFSELECT + .globl _SETUPDAT + .globl _SUDPTRCTL + .globl _SUDPTRL + .globl _SUDPTRH + .globl _EP8FIFOBCL + .globl _EP8FIFOBCH + .globl _EP6FIFOBCL + .globl _EP6FIFOBCH + .globl _EP4FIFOBCL + .globl _EP4FIFOBCH + .globl _EP2FIFOBCL + .globl _EP2FIFOBCH + .globl _EP8FIFOFLGS + .globl _EP6FIFOFLGS + .globl _EP4FIFOFLGS + .globl _EP2FIFOFLGS + .globl _EP8CS + .globl _EP6CS + .globl _EP4CS + .globl _EP2CS + .globl _EP1INCS + .globl _EP1OUTCS + .globl _EP0CS + .globl _EP8BCL + .globl _EP8BCH + .globl _EP6BCL + .globl _EP6BCH + .globl _EP4BCL + .globl _EP4BCH + .globl _EP2BCL + .globl _EP2BCH + .globl _EP1INBC + .globl _EP1OUTBC + .globl _EP0BCL + .globl _EP0BCH + .globl _FNADDR + .globl _MICROFRAME + .globl _USBFRAMEL + .globl _USBFRAMEH + .globl _TOGCTL + .globl _WAKEUPCS + .globl _SUSPEND + .globl _USBCS + .globl _XAUTODAT2 + .globl _XAUTODAT1 + .globl _I2CTL + .globl _I2DAT + .globl _I2CS + .globl _PORTECFG + .globl _PORTCCFG + .globl _PORTACFG + .globl _INTSETUP + .globl _INT4IVEC + .globl _INT2IVEC + .globl _CLRERRCNT + .globl _ERRCNTLIM + .globl _USBERRIRQ + .globl _USBERRIE + .globl _GPIFIRQ + .globl _GPIFIE + .globl _EPIRQ + .globl _EPIE + .globl _USBIRQ + .globl _USBIE + .globl _NAKIRQ + .globl _NAKIE + .globl _IBNIRQ + .globl _IBNIE + .globl _EP8FIFOIRQ + .globl _EP8FIFOIE + .globl _EP6FIFOIRQ + .globl _EP6FIFOIE + .globl _EP4FIFOIRQ + .globl _EP4FIFOIE + .globl _EP2FIFOIRQ + .globl _EP2FIFOIE + .globl _OUTPKTEND + .globl _INPKTEND + .globl _EP8ISOINPKTS + .globl _EP6ISOINPKTS + .globl _EP4ISOINPKTS + .globl _EP2ISOINPKTS + .globl _EP8FIFOPFL + .globl _EP8FIFOPFH + .globl _EP6FIFOPFL + .globl _EP6FIFOPFH + .globl _EP4FIFOPFL + .globl _EP4FIFOPFH + .globl _EP2FIFOPFL + .globl _EP2FIFOPFH + .globl _EP8AUTOINLENL + .globl _EP8AUTOINLENH + .globl _EP6AUTOINLENL + .globl _EP6AUTOINLENH + .globl _EP4AUTOINLENL + .globl _EP4AUTOINLENH + .globl _EP2AUTOINLENL + .globl _EP2AUTOINLENH + .globl _EP8FIFOCFG + .globl _EP6FIFOCFG + .globl _EP4FIFOCFG + .globl _EP2FIFOCFG + .globl _EP8CFG + .globl _EP6CFG + .globl _EP4CFG + .globl _EP2CFG + .globl _EP1INCFG + .globl _EP1OUTCFG + .globl _REVCTL + .globl _REVID + .globl _FIFOPINPOLAR + .globl _UART230 + .globl _BPADDRL + .globl _BPADDRH + .globl _BREAKPT + .globl _FIFORESET + .globl _PINFLAGSCD + .globl _PINFLAGSAB + .globl _IFCONFIG + .globl _CPUCS + .globl _RES_WAVEDATA_END + .globl _GPIF_WAVE_DATA +;-------------------------------------------------------- +; special function registers +;-------------------------------------------------------- +_IOA = 0x0080 +_SP = 0x0081 +_DPL = 0x0082 +_DPH = 0x0083 +_DPL1 = 0x0084 +_DPH1 = 0x0085 +_DPS = 0x0086 +_PCON = 0x0087 +_TCON = 0x0088 +_TMOD = 0x0089 +_TL0 = 0x008a +_TL1 = 0x008b +_TH0 = 0x008c +_TH1 = 0x008d +_CKCON = 0x008e +_IOB = 0x0090 +_EXIF = 0x0091 +_MPAGE = 0x0092 +_SCON0 = 0x0098 +_SBUF0 = 0x0099 +_APTR1H = 0x009a +_APTR1L = 0x009b +_AUTODAT1 = 0x009c +_AUTOPTRH2 = 0x009d +_AUTOPTRL2 = 0x009e +_AUTODAT2 = 0x009f +_IOC = 0x00a0 +_INT2CLR = 0x00a1 +_INT4CLR = 0x00a2 +_IE = 0x00a8 +_EP2468STAT = 0x00aa +_EP24FIFOFLGS = 0x00ab +_EP68FIFOFLGS = 0x00ac +_AUTOPTRSETUP = 0x00af +_IOD = 0x00b0 +_IOE = 0x00b1 +_OEA = 0x00b2 +_OEB = 0x00b3 +_OEC = 0x00b4 +_OED = 0x00b5 +_OEE = 0x00b6 +_IP = 0x00b8 +_EP01STAT = 0x00ba +_GPIFTRIG = 0x00bb +_GPIFSGLDATH = 0x00bd +_GPIFSGLDATLX = 0x00be +_GPIFSGLDATLNOX = 0x00bf +_SCON1 = 0x00c0 +_SBUF1 = 0x00c1 +_T2CON = 0x00c8 +_RCAP2L = 0x00ca +_RCAP2H = 0x00cb +_TL2 = 0x00cc +_TH2 = 0x00cd +_PSW = 0x00d0 +_EICON = 0x00d8 +_ACC = 0x00e0 +_EIE = 0x00e8 +_B = 0x00f0 +_EIP = 0x00f8 +;-------------------------------------------------------- +; special function bits +;-------------------------------------------------------- +_SEL = 0x0086 +_IT0 = 0x0088 +_IE0 = 0x0089 +_IT1 = 0x008a +_IE1 = 0x008b +_TR0 = 0x008c +_TF0 = 0x008d +_TR1 = 0x008e +_TF1 = 0x008f +_RI = 0x0098 +_TI = 0x0099 +_RB8 = 0x009a +_TB8 = 0x009b +_REN = 0x009c +_SM2 = 0x009d +_SM1 = 0x009e +_SM0 = 0x009f +_EX0 = 0x00a8 +_ET0 = 0x00a9 +_EX1 = 0x00aa +_ET1 = 0x00ab +_ES0 = 0x00ac +_ET2 = 0x00ad +_ES1 = 0x00ae +_EA = 0x00af +_PX0 = 0x00b8 +_PT0 = 0x00b9 +_PX1 = 0x00ba +_PT1 = 0x00bb +_PS0 = 0x00bc +_PT2 = 0x00bd +_PS1 = 0x00be +_RI1 = 0x00c0 +_TI1 = 0x00c1 +_RB81 = 0x00c2 +_TB81 = 0x00c3 +_REN1 = 0x00c4 +_SM21 = 0x00c5 +_SM11 = 0x00c6 +_SM01 = 0x00c7 +_CP_RL2 = 0x00c8 +_C_T2 = 0x00c9 +_TR2 = 0x00ca +_EXEN2 = 0x00cb +_TCLK = 0x00cc +_RCLK = 0x00cd +_EXF2 = 0x00ce +_TF2 = 0x00cf +_P = 0x00d0 +_FL = 0x00d1 +_OV = 0x00d2 +_RS0 = 0x00d3 +_RS1 = 0x00d4 +_F0 = 0x00d5 +_AC = 0x00d6 +_CY = 0x00d7 +_INT6 = 0x00db +_RESI = 0x00dc +_ERESI = 0x00dd +_SMOD1 = 0x00df +_EIUSB = 0x00e8 +_EI2C = 0x00e9 +_EIEX4 = 0x00ea +_EIEX5 = 0x00eb +_EIEX6 = 0x00ec +_PUSB = 0x00f8 +_PI2C = 0x00f9 +_EIPX4 = 0x00fa +_EIPX5 = 0x00fb +_EIPX6 = 0x00fc +_bitS_CLK = 0x0080 +_bitS_OUT = 0x0081 +_bitS_IN = 0x0082 +_bitALTERA_DATA0 = 0x00a1 +_bitALTERA_DCLK = 0x00a3 +;-------------------------------------------------------- +; overlayable register banks +;-------------------------------------------------------- + .area REG_BANK_0 (REL,OVR,DATA) + .ds 8 +;-------------------------------------------------------- +; internal ram data +;-------------------------------------------------------- + .area DSEG (DATA) +;-------------------------------------------------------- +; overlayable items in internal ram +;-------------------------------------------------------- + .area OSEG (OVR,DATA) +;-------------------------------------------------------- +; Stack segment in internal ram +;-------------------------------------------------------- + .area SSEG (DATA) +__start__stack: + .ds 1 + +;-------------------------------------------------------- +; indirectly addressable internal ram data +;-------------------------------------------------------- + .area ISEG (DATA) +;-------------------------------------------------------- +; bit data +;-------------------------------------------------------- + .area BSEG (BIT) +;-------------------------------------------------------- +; external ram data +;-------------------------------------------------------- + .area XSEG (XDATA) +_GPIF_WAVE_DATA = 0xe400 +_RES_WAVEDATA_END = 0xe480 +_CPUCS = 0xe600 +_IFCONFIG = 0xe601 +_PINFLAGSAB = 0xe602 +_PINFLAGSCD = 0xe603 +_FIFORESET = 0xe604 +_BREAKPT = 0xe605 +_BPADDRH = 0xe606 +_BPADDRL = 0xe607 +_UART230 = 0xe608 +_FIFOPINPOLAR = 0xe609 +_REVID = 0xe60a +_REVCTL = 0xe60b +_EP1OUTCFG = 0xe610 +_EP1INCFG = 0xe611 +_EP2CFG = 0xe612 +_EP4CFG = 0xe613 +_EP6CFG = 0xe614 +_EP8CFG = 0xe615 +_EP2FIFOCFG = 0xe618 +_EP4FIFOCFG = 0xe619 +_EP6FIFOCFG = 0xe61a +_EP8FIFOCFG = 0xe61b +_EP2AUTOINLENH = 0xe620 +_EP2AUTOINLENL = 0xe621 +_EP4AUTOINLENH = 0xe622 +_EP4AUTOINLENL = 0xe623 +_EP6AUTOINLENH = 0xe624 +_EP6AUTOINLENL = 0xe625 +_EP8AUTOINLENH = 0xe626 +_EP8AUTOINLENL = 0xe627 +_EP2FIFOPFH = 0xe630 +_EP2FIFOPFL = 0xe631 +_EP4FIFOPFH = 0xe632 +_EP4FIFOPFL = 0xe633 +_EP6FIFOPFH = 0xe634 +_EP6FIFOPFL = 0xe635 +_EP8FIFOPFH = 0xe636 +_EP8FIFOPFL = 0xe637 +_EP2ISOINPKTS = 0xe640 +_EP4ISOINPKTS = 0xe641 +_EP6ISOINPKTS = 0xe642 +_EP8ISOINPKTS = 0xe643 +_INPKTEND = 0xe648 +_OUTPKTEND = 0xe649 +_EP2FIFOIE = 0xe650 +_EP2FIFOIRQ = 0xe651 +_EP4FIFOIE = 0xe652 +_EP4FIFOIRQ = 0xe653 +_EP6FIFOIE = 0xe654 +_EP6FIFOIRQ = 0xe655 +_EP8FIFOIE = 0xe656 +_EP8FIFOIRQ = 0xe657 +_IBNIE = 0xe658 +_IBNIRQ = 0xe659 +_NAKIE = 0xe65a +_NAKIRQ = 0xe65b +_USBIE = 0xe65c +_USBIRQ = 0xe65d +_EPIE = 0xe65e +_EPIRQ = 0xe65f +_GPIFIE = 0xe660 +_GPIFIRQ = 0xe661 +_USBERRIE = 0xe662 +_USBERRIRQ = 0xe663 +_ERRCNTLIM = 0xe664 +_CLRERRCNT = 0xe665 +_INT2IVEC = 0xe666 +_INT4IVEC = 0xe667 +_INTSETUP = 0xe668 +_PORTACFG = 0xe670 +_PORTCCFG = 0xe671 +_PORTECFG = 0xe672 +_I2CS = 0xe678 +_I2DAT = 0xe679 +_I2CTL = 0xe67a +_XAUTODAT1 = 0xe67b +_XAUTODAT2 = 0xe67c +_USBCS = 0xe680 +_SUSPEND = 0xe681 +_WAKEUPCS = 0xe682 +_TOGCTL = 0xe683 +_USBFRAMEH = 0xe684 +_USBFRAMEL = 0xe685 +_MICROFRAME = 0xe686 +_FNADDR = 0xe687 +_EP0BCH = 0xe68a +_EP0BCL = 0xe68b +_EP1OUTBC = 0xe68d +_EP1INBC = 0xe68f +_EP2BCH = 0xe690 +_EP2BCL = 0xe691 +_EP4BCH = 0xe694 +_EP4BCL = 0xe695 +_EP6BCH = 0xe698 +_EP6BCL = 0xe699 +_EP8BCH = 0xe69c +_EP8BCL = 0xe69d +_EP0CS = 0xe6a0 +_EP1OUTCS = 0xe6a1 +_EP1INCS = 0xe6a2 +_EP2CS = 0xe6a3 +_EP4CS = 0xe6a4 +_EP6CS = 0xe6a5 +_EP8CS = 0xe6a6 +_EP2FIFOFLGS = 0xe6a7 +_EP4FIFOFLGS = 0xe6a8 +_EP6FIFOFLGS = 0xe6a9 +_EP8FIFOFLGS = 0xe6aa +_EP2FIFOBCH = 0xe6ab +_EP2FIFOBCL = 0xe6ac +_EP4FIFOBCH = 0xe6ad +_EP4FIFOBCL = 0xe6ae +_EP6FIFOBCH = 0xe6af +_EP6FIFOBCL = 0xe6b0 +_EP8FIFOBCH = 0xe6b1 +_EP8FIFOBCL = 0xe6b2 +_SUDPTRH = 0xe6b3 +_SUDPTRL = 0xe6b4 +_SUDPTRCTL = 0xe6b5 +_SETUPDAT = 0xe6b8 +_GPIFWFSELECT = 0xe6c0 +_GPIFIDLECS = 0xe6c1 +_GPIFIDLECTL = 0xe6c2 +_GPIFCTLCFG = 0xe6c3 +_GPIFADRH = 0xe6c4 +_GPIFADRL = 0xe6c5 +_GPIFTCB3 = 0xe6ce +_GPIFTCB2 = 0xe6cf +_GPIFTCB1 = 0xe6d0 +_GPIFTCB0 = 0xe6d1 +_EP2GPIFFLGSEL = 0xe6d2 +_EP2GPIFPFSTOP = 0xe6d3 +_EP2GPIFTRIG = 0xe6d4 +_EP4GPIFFLGSEL = 0xe6da +_EP4GPIFPFSTOP = 0xe6db +_EP4GPIFTRIG = 0xe6dc +_EP6GPIFFLGSEL = 0xe6e2 +_EP6GPIFPFSTOP = 0xe6e3 +_EP6GPIFTRIG = 0xe6e4 +_EP8GPIFFLGSEL = 0xe6ea +_EP8GPIFPFSTOP = 0xe6eb +_EP8GPIFTRIG = 0xe6ec +_XGPIFSGLDATH = 0xe6f0 +_XGPIFSGLDATLX = 0xe6f1 +_XGPIFSGLDATLNOX = 0xe6f2 +_GPIFREADYCFG = 0xe6f3 +_GPIFREADYSTAT = 0xe6f4 +_GPIFABORT = 0xe6f5 +_FLOWSTATE = 0xe6c6 +_FLOWLOGIC = 0xe6c7 +_FLOWEQ0CTL = 0xe6c8 +_FLOWEQ1CTL = 0xe6c9 +_FLOWHOLDOFF = 0xe6ca +_FLOWSTB = 0xe6cb +_FLOWSTBEDGE = 0xe6cc +_FLOWSTBHPERIOD = 0xe6cd +_GPIFHOLDAMOUNT = 0xe60c +_UDMACRCH = 0xe67d +_UDMACRCL = 0xe67e +_UDMACRCQUAL = 0xe67f +_DBUG = 0xe6f8 +_TESTCFG = 0xe6f9 +_USBTEST = 0xe6fa +_CT1 = 0xe6fb +_CT2 = 0xe6fc +_CT3 = 0xe6fd +_CT4 = 0xe6fe +_EP0BUF = 0xe740 +_EP1OUTBUF = 0xe780 +_EP1INBUF = 0xe7c0 +_EP2FIFOBUF = 0xf000 +_EP4FIFOBUF = 0xf400 +_EP6FIFOBUF = 0xf800 +_EP8FIFOBUF = 0xfc00 +;-------------------------------------------------------- +; external initialized ram data +;-------------------------------------------------------- +;-------------------------------------------------------- +; interrupt vector +;-------------------------------------------------------- + .area CSEG (CODE) +__interrupt_vect: + ljmp __sdcc_gsinit_startup +;-------------------------------------------------------- +; global & static initialisations +;-------------------------------------------------------- + .area GSINIT (CODE) + .area GSFINAL (CODE) + .area GSINIT (CODE) +__sdcc_gsinit_startup: + mov sp,#__start__stack - 1 + lcall __sdcc_external_startup + mov a,dpl + jz __sdcc_init_data + ljmp __sdcc_program_startup +__sdcc_init_data: + .area GSFINAL (CODE) + ljmp __sdcc_program_startup +;-------------------------------------------------------- +; Home +;-------------------------------------------------------- + .area HOME (CODE) + .area CSEG (CODE) +;-------------------------------------------------------- +; code +;-------------------------------------------------------- + .area CSEG (CODE) +__sdcc_program_startup: + lcall _eeprom_init +; return from _eeprom_init will spin here + sjmp . + .area CSEG (CODE) diff --git a/firmware/fx2/src/usrp1/eeprom_init.c b/firmware/fx2/src/usrp1/eeprom_init.c new file mode 100644 index 000000000..a6f6cbe2d --- /dev/null +++ b/firmware/fx2/src/usrp1/eeprom_init.c @@ -0,0 +1,116 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "usrp_common.h" +#include "usrp_commands.h" +#include "spi.h" + +/* + * the host side fpga loader code pushes an MD5 hash of the bitstream + * into hash1. + */ +#define USRP_HASH_SIZE 16 +xdata at USRP_HASH_SLOT_0_ADDR unsigned char hash0[USRP_HASH_SIZE]; + + +#define enable_codecs() USRP_PA &= ~(bmPA_SEN_CODEC_A | bmPA_SEN_CODEC_B) +#define disable_all() USRP_PA |= (bmPA_SEN_CODEC_A | bmPA_SEN_CODEC_B) + +static void +write_byte_msb (unsigned char v); + +void +write_both_9862s (unsigned char header_lo, unsigned char v) +{ + enable_codecs (); + + write_byte_msb (header_lo); + write_byte_msb (v); + + disable_all (); +} + +// ---------------------------------------------------------------- + +static void +write_byte_msb (unsigned char v) +{ + unsigned char n = 8; + do { + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + } while (--n != 0); +} + +// ---------------------------------------------------------------- + +#define REG_RX_PWR_DN 1 +#define REG_TX_PWR_DN 8 +#define REG_TX_MODULATOR 20 + +void eeprom_init (void) +{ + unsigned short counter; + unsigned char i; + + // configure IO ports (B and D are used by GPIF) + + IOA = bmPORT_A_INITIAL; // Port A initial state + OEA = bmPORT_A_OUTPUTS; // Port A direction register + + IOC = bmPORT_C_INITIAL; // Port C initial state + OEC = bmPORT_C_OUTPUTS; // Port C direction register + + IOE = bmPORT_E_INITIAL; // Port E initial state + OEE = bmPORT_E_OUTPUTS; // Port E direction register + + EP0BCH = 0; SYNCDELAY; + + // USBCS &= ~bmRENUM; // chip firmware handles commands + USBCS = 0; // chip firmware handles commands + + USRP_PC &= ~bmPC_nRESET; // active low reset + USRP_PC |= bmPC_nRESET; + + // init_spi (); + bitS_OUT = 0; /* idle state has CLK = 0 */ + + write_both_9862s (REG_RX_PWR_DN, 0x01); + write_both_9862s (REG_TX_PWR_DN, 0x0f); // pwr dn digital and analog_both + write_both_9862s (REG_TX_MODULATOR, 0x00); // coarse & fine modulators disabled + + // zero firmware hash slot + i = 0; + do { + hash0[i] = 0; + i++; + } while (i != USRP_HASH_SIZE); + + counter = 0; + while (1){ + counter++; + if (counter & 0x8000) + IOC ^= bmPC_LED0; + } +} diff --git a/firmware/fx2/src/usrp1/eeprom_io.c b/firmware/fx2/src/usrp1/eeprom_io.c new file mode 100644 index 000000000..9eeb53636 --- /dev/null +++ b/firmware/fx2/src/usrp1/eeprom_io.c @@ -0,0 +1,65 @@ +/* -*- c++ -*- */ +/* + * Copyright 2006 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "eeprom_io.h" +#include "i2c.h" +#include "delay.h" + +// returns non-zero if successful, else 0 +unsigned char +eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset, + xdata unsigned char *buf, unsigned char len) +{ + // We setup a random read by first doing a "zero byte write". + // Writes carry an address. Reads use an implicit address. + + static xdata unsigned char cmd[1]; + cmd[0] = eeprom_offset; + if (!i2c_write(i2c_addr, cmd, 1)) + return 0; + + return i2c_read(i2c_addr, buf, len); +} + + +#if 0 + +// returns non-zero if successful, else 0 +unsigned char +eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset, + const xdata unsigned char *buf, unsigned char len) +{ + static xdata unsigned char cmd[2]; + unsigned char ok; + + while (len-- > 0){ + cmd[0] = eeprom_offset++; + cmd[1] = *buf++; + ok = i2c_write(i2c_addr, cmd, 2); + mdelay(10); // delay 10ms worst case write time + if (!ok) + return 0; + } + return 1; +} + +#endif diff --git a/firmware/fx2/src/usrp1/eeprom_io.h b/firmware/fx2/src/usrp1/eeprom_io.h new file mode 100644 index 000000000..558017b12 --- /dev/null +++ b/firmware/fx2/src/usrp1/eeprom_io.h @@ -0,0 +1,38 @@ +/* -*- c++ -*- */ +/* + * Copyright 2006 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef INCLUDED_EEPROM_IO_H +#define INCLUDED_EEPROM_IO_H + + +// returns non-zero if successful, else 0 +unsigned char +eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset, + xdata unsigned char *buf, unsigned char len); + +// returns non-zero if successful, else 0 +unsigned char +eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset, + const xdata unsigned char *buf, unsigned char len); + + +#endif /* INCLUDED_EEPROM_IO_H */ diff --git a/firmware/fx2/src/usrp1/fpga_load.c b/firmware/fx2/src/usrp1/fpga_load.c new file mode 100644 index 000000000..b0256e925 --- /dev/null +++ b/firmware/fx2/src/usrp1/fpga_load.c @@ -0,0 +1 @@ +#include "../common/fpga_load.c" diff --git a/firmware/fx2/src/usrp1/fpga_rev2.c b/firmware/fx2/src/usrp1/fpga_rev2.c new file mode 100644 index 000000000..cca961dc4 --- /dev/null +++ b/firmware/fx2/src/usrp1/fpga_rev2.c @@ -0,0 +1,122 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "fpga.h" +#include "fpga_regs_common.h" +#include "usrp_common.h" +#include "usrp_globals.h" +#include "spi.h" + +unsigned char g_tx_reset = 0; +unsigned char g_rx_reset = 0; + +void +fpga_write_reg (unsigned char regno, const xdata unsigned char *regval) +{ + spi_write (0, 0x00 | (regno & 0x7f), + SPI_ENABLE_FPGA, + SPI_FMT_MSB | SPI_FMT_HDR_1, + regval, 4); +} + + +static xdata unsigned char regval[4] = {0, 0, 0, 0}; + +static void +write_fpga_master_ctrl (void) +{ + unsigned char v = 0; + if (g_tx_enable) + v |= bmFR_MC_ENABLE_TX; + if (g_rx_enable) + v |= bmFR_MC_ENABLE_RX; + if (g_tx_reset) + v |= bmFR_MC_RESET_TX; + if (g_rx_reset) + v |= bmFR_MC_RESET_RX; + regval[3] = v; + + fpga_write_reg (FR_MASTER_CTRL, regval); +} + +// Resets both AD9862's and the FPGA serial bus interface. + +void +fpga_set_reset (unsigned char on) +{ + on &= 0x1; + + if (on){ + USRP_PC &= ~bmPC_nRESET; // active low + g_tx_enable = 0; + g_rx_enable = 0; + g_tx_reset = 0; + g_rx_reset = 0; + } + else + USRP_PC |= bmPC_nRESET; +} + +void +fpga_set_tx_enable (unsigned char on) +{ + on &= 0x1; + g_tx_enable = on; + + write_fpga_master_ctrl (); + + if (on){ + g_tx_underrun = 0; + fpga_clear_flags (); + } +} + +void +fpga_set_rx_enable (unsigned char on) +{ + on &= 0x1; + g_rx_enable = on; + + write_fpga_master_ctrl (); + if (on){ + g_rx_overrun = 0; + fpga_clear_flags (); + } +} + +void +fpga_set_tx_reset (unsigned char on) +{ + on &= 0x1; + g_tx_reset = on; + + write_fpga_master_ctrl (); +} + +void +fpga_set_rx_reset (unsigned char on) +{ + on &= 0x1; + g_rx_reset = on; + + write_fpga_master_ctrl (); +} diff --git a/firmware/fx2/src/usrp1/fpga_rev2.h b/firmware/fx2/src/usrp1/fpga_rev2.h new file mode 100644 index 000000000..54ec3f9fa --- /dev/null +++ b/firmware/fx2/src/usrp1/fpga_rev2.h @@ -0,0 +1,58 @@ +/* + * USRP - Universal Software Radio Peripheral + * + * Copyright (C) 2003,2004 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA + */ + +#ifndef INCLUDED_FPGA_REV1_H +#define INCLUDED_FPGA_REV1_H + +void fpga_set_reset (unsigned char v); +void fpga_set_tx_enable (unsigned char v); +void fpga_set_rx_enable (unsigned char v); +void fpga_set_tx_reset (unsigned char v); +void fpga_set_rx_reset (unsigned char v); + +unsigned char fpga_has_room_for_packet (void); +unsigned char fpga_has_packet_avail (void); + +#if (UC_BOARD_HAS_FPGA) +/* + * return TRUE iff FPGA internal fifo has room for 512 bytes. + */ +#define fpga_has_room_for_packet() (GPIFREADYSTAT & bmFPGA_HAS_SPACE) + +/* + * return TRUE iff FPGA internal fifo has at least 512 bytes available. + */ +#define fpga_has_packet_avail() (GPIFREADYSTAT & bmFPGA_PKT_AVAIL) + +#else /* no FPGA on board. fake it. */ + +#define fpga_has_room_for_packet() TRUE +#define fpga_has_packet_avail() TRUE + +#endif + +#define fpga_clear_flags() \ + do { \ + USRP_PE |= bmPE_FPGA_CLR_STATUS; \ + USRP_PE &= ~bmPE_FPGA_CLR_STATUS; \ + } while (0) + + +#endif /* INCLUDED_FPGA_REV1_H */ diff --git a/firmware/fx2/src/usrp1/gpif.c b/firmware/fx2/src/usrp1/gpif.c new file mode 100644 index 000000000..f6745a43b --- /dev/null +++ b/firmware/fx2/src/usrp1/gpif.c @@ -0,0 +1,292 @@ +// This program configures the General Programmable Interface (GPIF) for FX2. +// Please do not modify sections of text which are marked as "DO NOT EDIT ...". +// +// DO NOT EDIT ... +// GPIF Initialization +// Interface Timing Async +// Internal Ready Init IntRdy=1 +// CTL Out Tristate-able Binary +// SingleWrite WF Select 1 +// SingleRead WF Select 0 +// FifoWrite WF Select 3 +// FifoRead WF Select 2 +// Data Bus Idle Drive Tristate +// END DO NOT EDIT + +// DO NOT EDIT ... +// GPIF Wave Names +// Wave 0 = singlerd +// Wave 1 = singlewr +// Wave 2 = FIFORd +// Wave 3 = FIFOWr + +// GPIF Ctrl Outputs Level +// CTL 0 = WEN# CMOS +// CTL 1 = REN# CMOS +// CTL 2 = OE# CMOS +// CTL 3 = CLRST CMOS +// CTL 4 = unused CMOS +// CTL 5 = BOGUS CMOS + +// GPIF Rdy Inputs +// RDY0 = EF# +// RDY1 = FF# +// RDY2 = unused +// RDY3 = unused +// RDY4 = unused +// RDY5 = TCXpire +// FIFOFlag = FIFOFlag +// IntReady = IntReady +// END DO NOT EDIT +// DO NOT EDIT ... +// +// GPIF Waveform 0: singlerd +// +// Interval 0 1 2 3 4 5 6 Idle (7) +// _________ _________ _________ _________ _________ _________ _________ _________ +// +// AddrMode Same Val Same Val Same Val Same Val Same Val Same Val Same Val +// DataMode NO Data NO Data NO Data NO Data NO Data NO Data NO Data +// NextData SameData SameData SameData SameData SameData SameData SameData +// Int Trig No Int No Int No Int No Int No Int No Int No Int +// IF/Wait Wait 1 Wait 1 Wait 1 Wait 1 Wait 1 Wait 1 Wait 1 +// Term A +// LFunc +// Term B +// Branch1 +// Branch0 +// Re-Exec +// Sngl/CRC Default Default Default Default Default Default Default +// WEN# 0 0 0 0 0 0 0 0 +// REN# 0 0 0 0 0 0 0 0 +// OE# 0 0 0 0 0 0 0 0 +// CLRST 0 0 0 0 0 0 0 0 +// unused 0 0 0 0 0 0 0 0 +// BOGUS 0 0 0 0 0 0 0 0 +// +// END DO NOT EDIT +// DO NOT EDIT ... +// +// GPIF Waveform 1: singlewr +// +// Interval 0 1 2 3 4 5 6 Idle (7) +// _________ _________ _________ _________ _________ _________ _________ _________ +// +// AddrMode Same Val Same Val Same Val Same Val Same Val Same Val Same Val +// DataMode Activate Activate Activate Activate Activate Activate Activate +// NextData SameData SameData SameData SameData SameData SameData SameData +// Int Trig No Int No Int No Int No Int No Int No Int No Int +// IF/Wait Wait 1 IF Wait 1 Wait 1 Wait 1 Wait 1 Wait 1 +// Term A EF# +// LFunc AND +// Term B EF# +// Branch1 ThenIdle +// Branch0 ElseIdle +// Re-Exec No +// Sngl/CRC Default Default Default Default Default Default Default +// WEN# 0 1 1 1 1 1 1 0 +// REN# 0 0 0 0 0 0 0 0 +// OE# 0 0 0 0 0 0 0 0 +// CLRST 0 0 0 0 0 0 0 0 +// unused 0 0 0 0 0 0 0 0 +// BOGUS 0 0 0 0 0 0 0 0 +// +// END DO NOT EDIT +// DO NOT EDIT ... +// +// GPIF Waveform 2: FIFORd +// +// Interval 0 1 2 3 4 5 6 Idle (7) +// _________ _________ _________ _________ _________ _________ _________ _________ +// +// AddrMode Same Val Same Val Same Val Same Val Same Val Same Val Same Val +// DataMode NO Data Activate NO Data NO Data NO Data NO Data NO Data +// NextData SameData SameData SameData SameData SameData SameData SameData +// Int Trig No Int No Int No Int No Int No Int No Int No Int +// IF/Wait Wait 1 IF Wait 1 IF Wait 1 Wait 1 Wait 1 +// Term A TCXpire TCXpire +// LFunc AND AND +// Term B TCXpire TCXpire +// Branch1 Then 2 ThenIdle +// Branch0 Else 1 ElseIdle +// Re-Exec No No +// Sngl/CRC Default Default Default Default Default Default Default +// WEN# 0 0 0 0 0 0 0 0 +// REN# 1 0 0 0 0 0 0 0 +// OE# 1 1 1 0 0 0 0 0 +// CLRST 0 0 0 0 0 0 0 0 +// unused 0 0 0 0 0 0 0 0 +// BOGUS 0 0 0 0 0 0 0 0 +// +// END DO NOT EDIT +// DO NOT EDIT ... +// +// GPIF Waveform 3: FIFOWr +// +// Interval 0 1 2 3 4 5 6 Idle (7) +// _________ _________ _________ _________ _________ _________ _________ _________ +// +// AddrMode Same Val Same Val Same Val Same Val Same Val Same Val Same Val +// DataMode NO Data Activate Activate Activate Activate Activate Activate +// NextData SameData SameData SameData SameData SameData SameData SameData +// Int Trig No Int No Int No Int No Int No Int No Int No Int +// IF/Wait Wait 1 IF Wait 1 Wait 1 Wait 1 Wait 1 Wait 1 +// Term A TCXpire +// LFunc AND +// Term B TCXpire +// Branch1 ThenIdle +// Branch0 Else 1 +// Re-Exec No +// Sngl/CRC Default Default Default Default Default Default Default +// WEN# 0 0 0 0 0 0 0 0 +// REN# 0 0 0 0 0 0 0 0 +// OE# 0 0 0 0 0 0 0 0 +// CLRST 0 0 0 0 0 0 0 0 +// unused 0 0 0 0 0 0 0 0 +// BOGUS 0 0 0 0 0 0 0 0 +// +// END DO NOT EDIT + +// GPIF Program Code + +// DO NOT EDIT ... +#include "fx2.h" +#include "fx2regs.h" +#include "fx2sdly.h" // SYNCDELAY macro +// END DO NOT EDIT + +// DO NOT EDIT ... +const char xdata WaveData[128] = +{ +// Wave 0 +/* LenBr */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x07, +/* Opcode*/ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/* Output*/ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/* LFun */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, +// Wave 1 +/* LenBr */ 0x01, 0x3F, 0x01, 0x01, 0x01, 0x01, 0x01, 0x07, +/* Opcode*/ 0x22, 0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x00, +/* Output*/ 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, +/* LFun */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, +// Wave 2 +/* LenBr */ 0x01, 0x11, 0x01, 0x3F, 0x01, 0x01, 0x01, 0x07, +/* Opcode*/ 0x00, 0x03, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, +/* Output*/ 0x06, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, +/* LFun */ 0x00, 0x2D, 0x00, 0x2D, 0x00, 0x00, 0x00, 0x3F, +// Wave 3 +/* LenBr */ 0x01, 0x39, 0x01, 0x01, 0x01, 0x01, 0x01, 0x07, +/* Opcode*/ 0x00, 0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x00, +/* Output*/ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/* LFun */ 0x00, 0x2D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, +}; +// END DO NOT EDIT + +// DO NOT EDIT ... +const char xdata FlowStates[36] = +{ +/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00, +/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00, +}; +// END DO NOT EDIT + +// DO NOT EDIT ... +const char xdata InitData[7] = +{ +/* Regs */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00 +}; +// END DO NOT EDIT + +// TO DO: You may add additional code below. + +void GpifInit( void ) +{ + BYTE i; + + // Registers which require a synchronization delay, see section 15.14 + // FIFORESET FIFOPINPOLAR + // INPKTEND OUTPKTEND + // EPxBCH:L REVCTL + // GPIFTCB3 GPIFTCB2 + // GPIFTCB1 GPIFTCB0 + // EPxFIFOPFH:L EPxAUTOINLENH:L + // EPxFIFOCFG EPxGPIFFLGSEL + // PINFLAGSxx EPxFIFOIRQ + // EPxFIFOIE GPIFIRQ + // GPIFIE GPIFADRH:L + // UDMACRCH:L EPxGPIFTRIG + // GPIFTRIG + + // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well... + // ...these have been replaced by GPIFTC[B3:B0] registers + + // 8051 doesn't have access to waveform memories 'til + // the part is in GPIF mode. + + IFCONFIG = 0xEE; + // IFCLKSRC=1 , FIFOs executes on internal clk source + // xMHz=1 , 48MHz internal clk rate + // IFCLKOE=0 , Don't drive IFCLK pin signal at 48MHz + // IFCLKPOL=0 , Don't invert IFCLK pin signal from internal clk + // ASYNC=1 , master samples asynchronous + // GSTATE=1 , Drive GPIF states out on PORTE[2:0], debug WF + // IFCFG[1:0]=10, FX2 in GPIF master mode + + GPIFABORT = 0xFF; // abort any waveforms pending + + GPIFREADYCFG = InitData[ 0 ]; + GPIFCTLCFG = InitData[ 1 ]; + GPIFIDLECS = InitData[ 2 ]; + GPIFIDLECTL = InitData[ 3 ]; + GPIFWFSELECT = InitData[ 5 ]; + GPIFREADYSTAT = InitData[ 6 ]; + + // use dual autopointer feature... + AUTOPTRSETUP = 0x07; // inc both pointers, + // ...warning: this introduces pdata hole(s) + // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2) + + // source + AUTOPTRH1 = MSB( &WaveData ); + AUTOPTRL1 = LSB( &WaveData ); + + // destination + AUTOPTRH2 = 0xE4; + AUTOPTRL2 = 0x00; + + // transfer + for ( i = 0x00; i < 128; i++ ) + { + EXTAUTODAT2 = EXTAUTODAT1; + } + +// Configure GPIF Address pins, output initial value, + PORTCCFG = 0xFF; // [7:0] as alt. func. GPIFADR[7:0] + OEC = 0xFF; // and as outputs + PORTECFG |= 0x80; // [8] as alt. func. GPIFADR[8] + OEE |= 0x80; // and as output + +// ...OR... tri-state GPIFADR[8:0] pins +// PORTCCFG = 0x00; // [7:0] as port I/O +// OEC = 0x00; // and as inputs +// PORTECFG &= 0x7F; // [8] as port I/O +// OEE &= 0x7F; // and as input + +// GPIF address pins update when GPIFADRH/L written + SYNCDELAY; // + GPIFADRH = 0x00; // bits[7:1] always 0 + SYNCDELAY; // + GPIFADRL = 0x00; // point to PERIPHERAL address 0x0000 + +// Configure GPIF FlowStates registers for Wave 0 of WaveData + FLOWSTATE = FlowStates[ 0 ]; + FLOWLOGIC = FlowStates[ 1 ]; + FLOWEQ0CTL = FlowStates[ 2 ]; + FLOWEQ1CTL = FlowStates[ 3 ]; + FLOWHOLDOFF = FlowStates[ 4 ]; + FLOWSTB = FlowStates[ 5 ]; + FLOWSTBEDGE = FlowStates[ 6 ]; + FLOWSTBHPERIOD = FlowStates[ 7 ]; +} + diff --git a/firmware/fx2/src/usrp1/gpif.gpf b/firmware/fx2/src/usrp1/gpif.gpf Binary files differnew file mode 100755 index 000000000..854e25399 --- /dev/null +++ b/firmware/fx2/src/usrp1/gpif.gpf diff --git a/firmware/fx2/src/usrp1/init_gpif.c b/firmware/fx2/src/usrp1/init_gpif.c new file mode 100644 index 000000000..0f5944b3b --- /dev/null +++ b/firmware/fx2/src/usrp1/init_gpif.c @@ -0,0 +1 @@ +#include "../common/init_gpif.c" diff --git a/firmware/fx2/src/usrp1/spi.c b/firmware/fx2/src/usrp1/spi.c new file mode 100644 index 000000000..f5803c55b --- /dev/null +++ b/firmware/fx2/src/usrp1/spi.c @@ -0,0 +1,381 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004,2006 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "spi.h" +#include "usrp_rev2_regs.h" + +static void +setup_enables (unsigned char enables) +{ + // Software eanbles are active high. + // Hardware enables are active low. + + // Uhh, the CODECs are active low, but the FPGA is active high... + enables ^= SPI_ENABLE_FPGA; + + // KLUDGE: This code is fragile, but reasonably fast... + // low three bits of enables go into port A + USRP_PA = USRP_PA | (0x7 << 3); // disable FPGA, CODEC_A, CODEC_B + USRP_PA ^= (enables & 0x7) << 3; // enable specified devs + + // high four bits of enables go into port E + USRP_PE = USRP_PE | (0xf << 4); // disable TX_A, RX_A, TX_B, RX_B + USRP_PE ^= (enables & 0xf0); // enable specified devs +} + +#define disable_all() setup_enables (0) + +void +init_spi (void) +{ + disable_all (); /* disable all devs */ + bitS_OUT = 0; /* idle state has CLK = 0 */ +} + +#if 0 +static unsigned char +count_bits8 (unsigned char v) +{ + static unsigned char count4[16] = { + 0, // 0 + 1, // 1 + 1, // 2 + 2, // 3 + 1, // 4 + 2, // 5 + 2, // 6 + 3, // 7 + 1, // 8 + 2, // 9 + 2, // a + 3, // b + 2, // c + 3, // d + 3, // e + 4 // f + }; + return count4[v & 0xf] + count4[(v >> 4) & 0xf]; +} + +#else + +static unsigned char +count_bits8 (unsigned char v) +{ + unsigned char count = 0; + if (v & (1 << 0)) count++; + if (v & (1 << 1)) count++; + if (v & (1 << 2)) count++; + if (v & (1 << 3)) count++; + if (v & (1 << 4)) count++; + if (v & (1 << 5)) count++; + if (v & (1 << 6)) count++; + if (v & (1 << 7)) count++; + return count; +} +#endif + +static void +write_byte_msb (unsigned char v); + +static void +write_bytes_msb (const xdata unsigned char *buf, unsigned char len); + +static void +read_bytes_msb (xdata unsigned char *buf, unsigned char len); + + +// returns non-zero if successful, else 0 +unsigned char +spi_read (unsigned char header_hi, unsigned char header_lo, + unsigned char enables, unsigned char format, + xdata unsigned char *buf, unsigned char len) +{ + if (count_bits8 (enables) > 1) + return 0; // error, too many enables set + + setup_enables (enables); + + if (format & SPI_FMT_LSB){ // order: LSB +#if 1 + return 0; // error, not implemented +#else + switch (format & SPI_FMR_HDR_MASK){ + case SPI_FMT_HDR_0: + break; + case SPI_FMT_HDR_1: + write_byte_lsb (header_lo); + break; + case SPI_FMT_HDR_2: + write_byte_lsb (header_lo); + write_byte_lsb (header_hi); + break; + default: + return 0; // error + } + if (len != 0) + read_bytes_lsb (buf, len); +#endif + } + + else { // order: MSB + + switch (format & SPI_FMT_HDR_MASK){ + case SPI_FMT_HDR_0: + break; + case SPI_FMT_HDR_1: + write_byte_msb (header_lo); + break; + case SPI_FMT_HDR_2: + write_byte_msb (header_hi); + write_byte_msb (header_lo); + break; + default: + return 0; // error + } + if (len != 0) + read_bytes_msb (buf, len); + } + + disable_all (); + return 1; // success +} + + +// returns non-zero if successful, else 0 +unsigned char +spi_write (unsigned char header_hi, unsigned char header_lo, + unsigned char enables, unsigned char format, + const xdata unsigned char *buf, unsigned char len) +{ + setup_enables (enables); + + if (format & SPI_FMT_LSB){ // order: LSB +#if 1 + return 0; // error, not implemented +#else + switch (format & SPI_FMR_HDR_MASK){ + case SPI_FMT_HDR_0: + break; + case SPI_FMT_HDR_1: + write_byte_lsb (header_lo); + break; + case SPI_FMT_HDR_2: + write_byte_lsb (header_lo); + write_byte_lsb (header_hi); + break; + default: + return 0; // error + } + if (len != 0) + write_bytes_lsb (buf, len); +#endif + } + + else { // order: MSB + + switch (format & SPI_FMT_HDR_MASK){ + case SPI_FMT_HDR_0: + break; + case SPI_FMT_HDR_1: + write_byte_msb (header_lo); + break; + case SPI_FMT_HDR_2: + write_byte_msb (header_hi); + write_byte_msb (header_lo); + break; + default: + return 0; // error + } + if (len != 0) + write_bytes_msb (buf, len); + } + + disable_all (); + return 1; // success +} + +// ---------------------------------------------------------------- + +static void +write_byte_msb (unsigned char v) +{ + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; +} + +static void +write_bytes_msb (const xdata unsigned char *buf, unsigned char len) +{ + while (len-- != 0){ + write_byte_msb (*buf++); + } +} + +#if 0 +/* + * This is incorrectly compiled by SDCC 2.4.0 + */ +static unsigned char +read_byte_msb (void) +{ + unsigned char v = 0; + + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + return v; +} +#else +static unsigned char +read_byte_msb (void) _naked +{ + _asm + clr a + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + mov dpl,a + ret + _endasm; +} +#endif + +static void +read_bytes_msb (xdata unsigned char *buf, unsigned char len) +{ + while (len-- != 0){ + *buf++ = read_byte_msb (); + } +} + diff --git a/firmware/fx2/src/usrp1/spi.h b/firmware/fx2/src/usrp1/spi.h new file mode 100644 index 000000000..12bc5e544 --- /dev/null +++ b/firmware/fx2/src/usrp1/spi.h @@ -0,0 +1,43 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef INCLUDED_SPI_H +#define INCLUDED_SPI_H + +#include "usrp_spi_defs.h" + +void init_spi (void); // one time call to init + +// returns non-zero if successful, else 0 +unsigned char +spi_read (unsigned char header_hi, unsigned char header_lo, + unsigned char enables, unsigned char format, + xdata unsigned char *buf, unsigned char len); + +// returns non-zero if successful, else 0 +unsigned char +spi_write (unsigned char header_hi, unsigned char header_lo, + unsigned char enables, unsigned char format, + const xdata unsigned char *buf, unsigned char len); + + +#endif /* INCLUDED_SPI_H */ diff --git a/firmware/fx2/src/usrp1/usb_descriptors.a51 b/firmware/fx2/src/usrp1/usb_descriptors.a51 new file mode 100644 index 000000000..a60adbef8 --- /dev/null +++ b/firmware/fx2/src/usrp1/usb_descriptors.a51 @@ -0,0 +1,404 @@ +;;; -*- asm -*- +;;; +;;; Copyright 2003 Free Software Foundation, Inc. +;;; +;;; This file is part of GNU Radio +;;; +;;; GNU Radio is free software; you can redistribute it and/or modify +;;; it under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3, or (at your option) +;;; any later version. +;;; +;;; GNU Radio is distributed in the hope that it will be useful, +;;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Radio; see the file COPYING. If not, write to +;;; the Free Software Foundation, Inc., 51 Franklin Street, +;;; Boston, MA 02110-1301, USA. +;;; + +;;; USB Descriptor table for the USRP +;;; +;;; We're a high-speed only device (480 Mb/sec) with 1 configuration +;;; and 3 interfaces. +;;; +;;; interface 0: command and status (ep0 COMMAND) +;;; interface 1: Transmit path (ep2 OUT BULK) +;;; interface 2: Receive path (ep6 IN BULK) + + .module usb_descriptors + + VID_FREE = 0xfffe ; Free Software Folks + PID_USRP = 0x0002 ; USRP + + ;; We distinguish configured from unconfigured USRPs using the Device ID. + ;; If the MSB of the DID is 0, the device is unconfigured. + ;; The LSB of the DID is reserved for hardware revs. + + DID_USRP = 0x0100 ; Device ID (bcd) + + + DSCR_DEVICE = 1 ; Descriptor type: Device + DSCR_CONFIG = 2 ; Descriptor type: Configuration + DSCR_STRING = 3 ; Descriptor type: String + DSCR_INTRFC = 4 ; Descriptor type: Interface + DSCR_ENDPNT = 5 ; Descriptor type: Endpoint + DSCR_DEVQUAL = 6 ; Descriptor type: Device Qualifier + + DSCR_DEVICE_LEN = 18 + DSCR_CONFIG_LEN = 9 + DSCR_INTRFC_LEN = 9 + DSCR_ENDPNT_LEN = 7 + DSCR_DEVQUAL_LEN = 10 + + ET_CONTROL = 0 ; Endpoint type: Control + ET_ISO = 1 ; Endpoint type: Isochronous + ET_BULK = 2 ; Endpoint type: Bulk + ET_INT = 3 ; Endpoint type: Interrupt + + + ;; configuration attributes + bmSELF_POWERED = 1 << 6 + +;;; -------------------------------------------------------- +;;; external ram data +;;;-------------------------------------------------------- + + .area USBDESCSEG (XDATA) + +;;; ---------------------------------------------------------------- +;;; descriptors used when operating at high speed (480Mb/sec) +;;; ---------------------------------------------------------------- + + .even ; descriptors must be 2-byte aligned for SUDPTR{H,L} to work + + ;; The .even directive isn't really honored by the linker. Bummer! + ;; (There's no way to specify an alignment requirement for a given area, + ;; hence when they're concatenated together, even doesn't work.) + ;; + ;; We work around this by telling the linker to put USBDESCSEG + ;; at 0xE000 absolute. This means that the maximimum length of this + ;; segment is 480 bytes, leaving room for the two hash slots + ;; at 0xE1EO to 0xE1FF. + ;; + ;; As of July 7, 2004, this segment is 326 bytes long + +_high_speed_device_descr:: + .db DSCR_DEVICE_LEN + .db DSCR_DEVICE + .db <0x0200 ; Specification version (LSB) + .db >0x0200 ; Specification version (MSB) + .db 0xff ; device class (vendor specific) + .db 0xff ; device subclass (vendor specific) + .db 0xff ; device protocol (vendor specific) + .db 64 ; bMaxPacketSize0 for endpoint 0 + .db <VID_FREE ; idVendor + .db >VID_FREE ; idVendor + .db <PID_USRP ; idProduct + .db >PID_USRP ; idProduct +_usb_desc_hw_rev_binary_patch_location_0:: + .db <DID_USRP ; bcdDevice + .db >DID_USRP ; bcdDevice + .db SI_VENDOR ; iManufacturer (string index) + .db SI_PRODUCT ; iProduct (string index) + .db SI_SERIAL ; iSerial number (string index) + .db 1 ; bNumConfigurations + +;;; describes the other speed (12Mb/sec) + .even +_high_speed_devqual_descr:: + .db DSCR_DEVQUAL_LEN + .db DSCR_DEVQUAL + .db <0x0200 ; bcdUSB (LSB) + .db >0x0200 ; bcdUSB (MSB) + .db 0xff ; bDeviceClass + .db 0xff ; bDeviceSubClass + .db 0xff ; bDeviceProtocol + .db 64 ; bMaxPacketSize0 + .db 1 ; bNumConfigurations (one config at 12Mb/sec) + .db 0 ; bReserved + + .even +_high_speed_config_descr:: + .db DSCR_CONFIG_LEN + .db DSCR_CONFIG + .db <(_high_speed_config_descr_end - _high_speed_config_descr) ; LSB + .db >(_high_speed_config_descr_end - _high_speed_config_descr) ; MSB + .db 3 ; bNumInterfaces + .db 1 ; bConfigurationValue + .db 0 ; iConfiguration + .db 0x80 | bmSELF_POWERED ; bmAttributes + .db 0 ; bMaxPower + + ;; interface descriptor 0 (command & status, ep0 COMMAND) + + .db DSCR_INTRFC_LEN + .db DSCR_INTRFC + .db 0 ; bInterfaceNumber (zero based) + .db 0 ; bAlternateSetting + .db 0 ; bNumEndpoints + .db 0xff ; bInterfaceClass (vendor specific) + .db 0xff ; bInterfaceSubClass (vendor specific) + .db 0xff ; bInterfaceProtocol (vendor specific) + .db SI_COMMAND_AND_STATUS ; iInterface (description) + + ;; interface descriptor 1 (transmit path, ep2 OUT BULK) + + .db DSCR_INTRFC_LEN + .db DSCR_INTRFC + .db 1 ; bInterfaceNumber (zero based) + .db 0 ; bAlternateSetting + .db 1 ; bNumEndpoints + .db 0xff ; bInterfaceClass (vendor specific) + .db 0xff ; bInterfaceSubClass (vendor specific) + .db 0xff ; bInterfaceProtocol (vendor specific) + .db SI_TX_PATH ; iInterface (description) + + ;; interface 1's end point + + .db DSCR_ENDPNT_LEN + .db DSCR_ENDPNT + .db 0x02 ; bEndpointAddress (ep 2 OUT) + .db ET_BULK ; bmAttributes + .db <512 ; wMaxPacketSize (LSB) + .db >512 ; wMaxPacketSize (MSB) + .db 0 ; bInterval (iso only) + + ;; interface descriptor 2 (receive path, ep6 IN BULK) + + .db DSCR_INTRFC_LEN + .db DSCR_INTRFC + .db 2 ; bInterfaceNumber (zero based) + .db 0 ; bAlternateSetting + .db 1 ; bNumEndpoints + .db 0xff ; bInterfaceClass (vendor specific) + .db 0xff ; bInterfaceSubClass (vendor specific) + .db 0xff ; bInterfaceProtocol (vendor specific) + .db SI_RX_PATH ; iInterface (description) + + ;; interface 2's end point + + .db DSCR_ENDPNT_LEN + .db DSCR_ENDPNT + .db 0x86 ; bEndpointAddress (ep 6 IN) + .db ET_BULK ; bmAttributes + .db <512 ; wMaxPacketSize (LSB) + .db >512 ; wMaxPacketSize (MSB) + .db 0 ; bInterval (iso only) + +_high_speed_config_descr_end: + +;;; ---------------------------------------------------------------- +;;; descriptors used when operating at full speed (12Mb/sec) +;;; ---------------------------------------------------------------- + + .even +_full_speed_device_descr:: + .db DSCR_DEVICE_LEN + .db DSCR_DEVICE + .db <0x0200 ; Specification version (LSB) + .db >0x0200 ; Specification version (MSB) + .db 0xff ; device class (vendor specific) + .db 0xff ; device subclass (vendor specific) + .db 0xff ; device protocol (vendor specific) + .db 64 ; bMaxPacketSize0 for endpoint 0 + .db <VID_FREE ; idVendor + .db >VID_FREE ; idVendor + .db <PID_USRP ; idProduct + .db >PID_USRP ; idProduct +_usb_desc_hw_rev_binary_patch_location_1:: + .db <DID_USRP ; bcdDevice + .db >DID_USRP ; bcdDevice + .db SI_VENDOR ; iManufacturer (string index) + .db SI_PRODUCT ; iProduct (string index) + .db SI_NONE ; iSerial number (None) + .db 1 ; bNumConfigurations + + +;;; describes the other speed (480Mb/sec) + .even +_full_speed_devqual_descr:: + .db DSCR_DEVQUAL_LEN + .db DSCR_DEVQUAL + .db <0x0200 ; bcdUSB + .db >0x0200 ; bcdUSB + .db 0xff ; bDeviceClass + .db 0xff ; bDeviceSubClass + .db 0xff ; bDeviceProtocol + .db 64 ; bMaxPacketSize0 + .db 1 ; bNumConfigurations (one config at 480Mb/sec) + .db 0 ; bReserved + + .even +_full_speed_config_descr:: + .db DSCR_CONFIG_LEN + .db DSCR_CONFIG + .db <(_full_speed_config_descr_end - _full_speed_config_descr) ; LSB + .db >(_full_speed_config_descr_end - _full_speed_config_descr) ; MSB + .db 1 ; bNumInterfaces + .db 1 ; bConfigurationValue + .db 0 ; iConfiguration + .db 0x80 | bmSELF_POWERED ; bmAttributes + .db 0 ; bMaxPower + + ;; interface descriptor 0 (command & status, ep0 COMMAND) + + .db DSCR_INTRFC_LEN + .db DSCR_INTRFC + .db 0 ; bInterfaceNumber (zero based) + .db 0 ; bAlternateSetting + .db 0 ; bNumEndpoints + .db 0xff ; bInterfaceClass (vendor specific) + .db 0xff ; bInterfaceSubClass (vendor specific) + .db 0xff ; bInterfaceProtocol (vendor specific) + .db SI_COMMAND_AND_STATUS ; iInterface (description) + +_full_speed_config_descr_end: + +;;; ---------------------------------------------------------------- +;;; string descriptors +;;; ---------------------------------------------------------------- + +_nstring_descriptors:: + .db (_string_descriptors_end - _string_descriptors) / 2 + +_string_descriptors:: + .db <str0, >str0 + .db <str1, >str1 + .db <str2, >str2 + .db <str3, >str3 + .db <str4, >str4 + .db <str5, >str5 + .db <str6, >str6 +_string_descriptors_end: + + SI_NONE = 0 + ;; str0 contains the language ID's. + .even +str0: .db str0_end - str0 + .db DSCR_STRING + .db 0 + .db 0 + .db <0x0409 ; magic code for US English (LSB) + .db >0x0409 ; magic code for US English (MSB) +str0_end: + + SI_VENDOR = 1 + .even +str1: .db str1_end - str1 + .db DSCR_STRING + .db 'F, 0 ; 16-bit unicode + .db 'r, 0 + .db 'e, 0 + .db 'e, 0 + .db ' , 0 + .db 'S, 0 + .db 'o, 0 + .db 'f, 0 + .db 't, 0 + .db 'w, 0 + .db 'a, 0 + .db 'r, 0 + .db 'e, 0 + .db ' , 0 + .db 'F, 0 + .db 'o, 0 + .db 'l, 0 + .db 'k, 0 + .db 's, 0 +str1_end: + + SI_PRODUCT = 2 + .even +str2: .db str2_end - str2 + .db DSCR_STRING + .db 'U, 0 + .db 'S, 0 + .db 'R, 0 + .db 'P, 0 + .db ' , 0 + .db 'R, 0 + .db 'e, 0 + .db 'v, 0 + .db ' , 0 +_usb_desc_hw_rev_ascii_patch_location_0:: + .db '?, 0 +str2_end: + + SI_COMMAND_AND_STATUS = 3 + .even +str3: .db str3_end - str3 + .db DSCR_STRING + .db 'C, 0 + .db 'o, 0 + .db 'm, 0 + .db 'm, 0 + .db 'a, 0 + .db 'n, 0 + .db 'd, 0 + .db ' , 0 + .db '&, 0 + .db ' , 0 + .db 'S, 0 + .db 't, 0 + .db 'a, 0 + .db 't, 0 + .db 'u, 0 + .db 's, 0 +str3_end: + + SI_TX_PATH = 4 + .even +str4: .db str4_end - str4 + .db DSCR_STRING + .db 'T, 0 + .db 'r, 0 + .db 'a, 0 + .db 'n, 0 + .db 's, 0 + .db 'm, 0 + .db 'i, 0 + .db 't, 0 + .db ' , 0 + .db 'P, 0 + .db 'a, 0 + .db 't, 0 + .db 'h, 0 +str4_end: + + SI_RX_PATH = 5 + .even +str5: .db str5_end - str5 + .db DSCR_STRING + .db 'R, 0 + .db 'e, 0 + .db 'c, 0 + .db 'e, 0 + .db 'i, 0 + .db 'v, 0 + .db 'e, 0 + .db ' , 0 + .db 'P, 0 + .db 'a, 0 + .db 't, 0 + .db 'h, 0 +str5_end: + + SI_SERIAL = 6 + .even +str6: .db str6_end - str6 + .db DSCR_STRING +_usb_desc_serial_number_ascii:: + .db '3, 0 + .db '., 0 + .db '1, 0 + .db '4, 0 + .db '1, 0 + .db '5, 0 + .db '9, 0 + .db '3, 0 +str6_end: + diff --git a/firmware/fx2/src/usrp1/usrp_common.c b/firmware/fx2/src/usrp1/usrp_common.c new file mode 100644 index 000000000..f389d9253 --- /dev/null +++ b/firmware/fx2/src/usrp1/usrp_common.c @@ -0,0 +1 @@ +#include "../common/usrp_common.c" diff --git a/firmware/fx2/src/usrp1/usrp_common.h b/firmware/fx2/src/usrp1/usrp_common.h new file mode 100644 index 000000000..738ba6b37 --- /dev/null +++ b/firmware/fx2/src/usrp1/usrp_common.h @@ -0,0 +1,77 @@ +/* + * USRP - Universal Software Radio Peripheral + * + * Copyright (C) 2003,2006 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA + */ + +/* + * common defines and prototypes for USRP + * + * In comments below "TRM" refers to the EZ-USB FX2 Technical Reference Manual + */ + +#ifndef _USRPCOMMON_H_ +#define _USRPCOMMON_H_ + +#include <usrp_config.h> +#include <usrp_rev2_regs.h> +#include <syncdelay.h> + +/* + * From TRM page 15-105: + * + * Under certain conditions, some read and write access to the FX2 + * registers must be separated by a "synchronization delay". The + * delay is necessary only under the following conditions: + * + * - between a write to any register in the 0xE600 - 0xE6FF range + * and a write to one of the registers listed below. + * + * - between a write to one of the registers listed below and a read + * from any register in the 0xE600 - 0xE6FF range. + * + * Registers which require a synchronization delay: + * + * FIFORESET FIFOPINPOLAR + * INPKTEND EPxBCH:L + * EPxFIFOPFH:L EPxAUTOINLENH:L + * EPxFIFOCFG EPxGPIFFLGSEL + * PINFLAGSAB PINFLAGSCD + * EPxFIFOIE EPxFIFOIRQ + * GPIFIE GPIFIRQ + * UDMACRCH:L GPIFADRH:L + * GPIFTRIG EPxGPIFTRIG + * OUTPKTEND REVCTL + * GPIFTCB3 GPIFTCB2 + * GPIFTCB1 GPIFTCB0 + */ + +#define TRUE 1 +#define FALSE 0 + + +void init_usrp (void); +void init_gpif (void); + +void set_led_0 (unsigned char on); +void set_led_1 (unsigned char on); +void toggle_led_0 (void); +void toggle_led_1 (void); + +#define la_trace(v) + +#endif /* _USRPCOMMON_H_ */ diff --git a/firmware/fx2/src/usrp1/usrp_main.c b/firmware/fx2/src/usrp1/usrp_main.c new file mode 100644 index 000000000..c7c09f8c5 --- /dev/null +++ b/firmware/fx2/src/usrp1/usrp_main.c @@ -0,0 +1,380 @@ +/* + * USRP - Universal Software Radio Peripheral + * + * Copyright (C) 2003,2004 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA + */ + +#include "usrp_common.h" +#include "usrp_commands.h" +#include "fpga.h" +#include "usrp_gpif_inline.h" +#include "timer.h" +#include "i2c.h" +#include "isr.h" +#include "usb_common.h" +#include "fx2utils.h" +#include "usrp_globals.h" +#include "usrp_i2c_addr.h" +#include <string.h> +#include "spi.h" +#include "eeprom_io.h" +#include "usb_descriptors.h" + +/* + * offsets into boot eeprom for configuration values + */ +#define HW_REV_OFFSET 5 +#define SERIAL_NO_OFFSET 248 +#define SERIAL_NO_LEN 8 + + +#define bRequestType SETUPDAT[0] +#define bRequest SETUPDAT[1] +#define wValueL SETUPDAT[2] +#define wValueH SETUPDAT[3] +#define wIndexL SETUPDAT[4] +#define wIndexH SETUPDAT[5] +#define wLengthL SETUPDAT[6] +#define wLengthH SETUPDAT[7] + + +unsigned char g_tx_enable = 0; +unsigned char g_rx_enable = 0; +unsigned char g_rx_overrun = 0; +unsigned char g_tx_underrun = 0; + +/* + * the host side fpga loader code pushes an MD5 hash of the bitstream + * into hash1. + */ +#define USRP_HASH_SIZE 16 +xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE]; + +static void +get_ep0_data (void) +{ + EP0BCL = 0; // arm EP0 for OUT xfer. This sets the busy bit + + while (EP0CS & bmEPBUSY) // wait for busy to clear + ; +} + +/* + * Handle our "Vendor Extension" commands on endpoint 0. + * If we handle this one, return non-zero. + */ +unsigned char +app_vendor_cmd (void) +{ + if (bRequestType == VRT_VENDOR_IN){ + + ///////////////////////////////// + // handle the IN requests + ///////////////////////////////// + + switch (bRequest){ + + case VRQ_GET_STATUS: + switch (wIndexL){ + + case GS_TX_UNDERRUN: + EP0BUF[0] = g_tx_underrun; + g_tx_underrun = 0; + EP0BCH = 0; + EP0BCL = 1; + break; + + case GS_RX_OVERRUN: + EP0BUF[0] = g_rx_overrun; + g_rx_overrun = 0; + EP0BCH = 0; + EP0BCL = 1; + break; + + default: + return 0; + } + break; + + case VRQ_I2C_READ: + if (!i2c_read (wValueL, EP0BUF, wLengthL)) + return 0; + + EP0BCH = 0; + EP0BCL = wLengthL; + break; + + case VRQ_SPI_READ: + if (!spi_read (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, wLengthL)) + return 0; + + EP0BCH = 0; + EP0BCL = wLengthL; + break; + + default: + return 0; + } + } + + else if (bRequestType == VRT_VENDOR_OUT){ + + ///////////////////////////////// + // handle the OUT requests + ///////////////////////////////// + + switch (bRequest){ + + case VRQ_SET_LED: + switch (wIndexL){ + case 0: + set_led_0 (wValueL); + break; + + case 1: + set_led_1 (wValueL); + break; + + default: + return 0; + } + break; + + case VRQ_FPGA_LOAD: + switch (wIndexL){ // sub-command + case FL_BEGIN: + return fpga_load_begin (); + + case FL_XFER: + get_ep0_data (); + return fpga_load_xfer (EP0BUF, EP0BCL); + + case FL_END: + return fpga_load_end (); + + default: + return 0; + } + break; + + + case VRQ_FPGA_SET_RESET: + fpga_set_reset (wValueL); + break; + + case VRQ_FPGA_SET_TX_ENABLE: + fpga_set_tx_enable (wValueL); + break; + + case VRQ_FPGA_SET_RX_ENABLE: + fpga_set_rx_enable (wValueL); + break; + + case VRQ_FPGA_SET_TX_RESET: + fpga_set_tx_reset (wValueL); + break; + + case VRQ_FPGA_SET_RX_RESET: + fpga_set_rx_reset (wValueL); + break; + + case VRQ_I2C_WRITE: + get_ep0_data (); + if (!i2c_write (wValueL, EP0BUF, EP0BCL)) + return 0; + break; + + case VRQ_SPI_WRITE: + get_ep0_data (); + if (!spi_write (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, EP0BCL)) + return 0; + break; + + default: + return 0; + } + + } + else + return 0; // invalid bRequestType + + return 1; +} + + + +static void +main_loop (void) +{ + setup_flowstate_common (); + + while (1){ + + if (usb_setup_packet_avail ()) + usb_handle_setup_packet (); + + + if (GPIFTRIG & bmGPIF_IDLE){ + + // OK, GPIF is idle. Let's try to give it some work. + + // First check for underruns and overruns + + if (UC_BOARD_HAS_FPGA && (USRP_PA & (bmPA_TX_UNDERRUN | bmPA_RX_OVERRUN))){ + + // record the under/over run + if (USRP_PA & bmPA_TX_UNDERRUN) + g_tx_underrun = 1; + + if (USRP_PA & bmPA_RX_OVERRUN) + g_rx_overrun = 1; + + // tell the FPGA to clear the flags + fpga_clear_flags (); + } + + // Next see if there are any "OUT" packets waiting for our attention, + // and if so, if there's room in the FPGA's FIFO for them. + + if (g_tx_enable && !(EP24FIFOFLGS & 0x02)){ // USB end point fifo is not empty... + + if (fpga_has_room_for_packet ()){ // ... and FPGA has room for packet + + GPIFTCB1 = 0x01; SYNCDELAY; + GPIFTCB0 = 0x00; SYNCDELAY; + + setup_flowstate_write (); + + SYNCDELAY; + GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; // start the xfer + SYNCDELAY; + + while (!(GPIFTRIG & bmGPIF_IDLE)){ + // wait for the transaction to complete + } + } + } + + // See if there are any requests for "IN" packets, and if so + // whether the FPGA's got any packets for us. + + if (g_rx_enable && !(EP6CS & bmEPFULL)){ // USB end point fifo is not full... + + if (fpga_has_packet_avail ()){ // ... and FPGA has packet available + + GPIFTCB1 = 0x01; SYNCDELAY; + GPIFTCB0 = 0x00; SYNCDELAY; + + setup_flowstate_read (); + + SYNCDELAY; + GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; // start the xfer + SYNCDELAY; + + while (!(GPIFTRIG & bmGPIF_IDLE)){ + // wait for the transaction to complete + } + + SYNCDELAY; + INPKTEND = 6; // tell USB we filled buffer (6 is our endpoint num) + } + } + } + } +} + + +/* + * called at 100 Hz from timer2 interrupt + * + * Toggle led 0 + */ +void +isr_tick (void) interrupt +{ + static unsigned char count = 1; + + if (--count == 0){ + count = 50; + USRP_LED_REG ^= bmLED0; + } + + clear_timer_irq (); +} + +/* + * Read h/w rev code and serial number out of boot eeprom and + * patch the usb descriptors with the values. + */ +void +patch_usb_descriptors(void) +{ + static xdata unsigned char hw_rev; + static xdata unsigned char serial_no[8]; + unsigned char i; + + eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1); // LSB of device id + usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev; + usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev; + usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0'; // FIXME if we get > 9 + + eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN); + + for (i = 0; i < SERIAL_NO_LEN; i++){ + unsigned char ch = serial_no[i]; + if (ch == 0xff) // make unprogrammed EEPROM default to '0' + ch = '0'; + usb_desc_serial_number_ascii[i << 1] = ch; + } +} + +void +main (void) +{ +#if 0 + g_rx_enable = 0; // FIXME (work around initialization bug) + g_tx_enable = 0; + g_rx_overrun = 0; + g_tx_underrun = 0; +#endif + + memset (hash1, 0, USRP_HASH_SIZE); // zero fpga bitstream hash. This forces reload + + init_usrp (); + init_gpif (); + + // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED) + IFCONFIG |= bmGSTATE; // no conflict, start with it on + + set_led_0 (0); + set_led_1 (0); + + EA = 0; // disable all interrupts + + patch_usb_descriptors(); + + setup_autovectors (); + usb_install_handlers (); + hook_timer_tick ((unsigned short) isr_tick); + + EIEX4 = 1; // disable INT4 FIXME + EA = 1; // global interrupt enable + + fx2_renumerate (); // simulates disconnect / reconnect + + main_loop (); +} diff --git a/firmware/fx2/src/usrp1/usrp_rev2_regs.h b/firmware/fx2/src/usrp1/usrp_rev2_regs.h new file mode 100644 index 000000000..a4f1d9896 --- /dev/null +++ b/firmware/fx2/src/usrp1/usrp_rev2_regs.h @@ -0,0 +1,163 @@ +/* + * USRP - Universal Software Radio Peripheral + * + * Copyright (C) 2003 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA + */ + +/* + * These are the register definitions for the Rev 1 USRP prototype + * The Rev 1 is the version with the AD9862's and daughterboards + */ + +#ifndef _USRP_REV1_REGS_H_ +#define _USRP_REV1_REGS_H_ + +#include "fx2regs.h" + +/* + * Port A (bit addressable): + */ + +#define USRP_PA IOA // Port A +#define USRP_PA_OE OEA // Port A direction register + +#define bmPA_S_CLK bmBIT0 // SPI serial clock +#define bmPA_S_DATA_TO_PERIPH bmBIT1 // SPI SDI (peripheral rel name) +#define bmPA_S_DATA_FROM_PERIPH bmBIT2 // SPI SDO (peripheral rel name) +#define bmPA_SEN_FPGA bmBIT3 // serial enable for FPGA (active low) +#define bmPA_SEN_CODEC_A bmBIT4 // serial enable AD9862 A (active low) +#define bmPA_SEN_CODEC_B bmBIT5 // serial enable AD9862 B (active low) +//#define bmPA_FX2_2 bmBIT6 // misc pin to FPGA (overflow) +//#define bmPA_FX2_3 bmBIT7 // misc pin to FPGA (underflow) +#define bmPA_RX_OVERRUN bmBIT6 // misc pin to FPGA (overflow) +#define bmPA_TX_UNDERRUN bmBIT7 // misc pin to FPGA (underflow) + + +sbit at 0x80+0 bitS_CLK; // 0x80 is the bit address of PORT A +sbit at 0x80+1 bitS_OUT; // out from FX2 point of view +sbit at 0x80+2 bitS_IN; // in from FX2 point of view + + +/* all outputs except S_DATA_FROM_PERIPH, FX2_2, FX2_3 */ + +#define bmPORT_A_OUTPUTS (bmPA_S_CLK \ + | bmPA_S_DATA_TO_PERIPH \ + | bmPA_SEN_FPGA \ + | bmPA_SEN_CODEC_A \ + | bmPA_SEN_CODEC_B \ + ) + +#define bmPORT_A_INITIAL (bmPA_SEN_FPGA | bmPA_SEN_CODEC_A | bmPA_SEN_CODEC_B) + + +/* Port B: GPIF FD[7:0] */ + +/* + * Port C (bit addressable): + * 5:1 FPGA configuration + */ + +#define USRP_PC IOC // Port C +#define USRP_PC_OE OEC // Port C direction register + +#define USRP_ALTERA_CONFIG USRP_PC + +#define bmPC_nRESET bmBIT0 // reset line to codecs (active low) +#define bmALTERA_DATA0 bmBIT1 +#define bmALTERA_NCONFIG bmBIT2 +#define bmALTERA_DCLK bmBIT3 +#define bmALTERA_CONF_DONE bmBIT4 +#define bmALTERA_NSTATUS bmBIT5 +#define bmPC_LED0 bmBIT6 // active low +#define bmPC_LED1 bmBIT7 // active low + +sbit at 0xA0+1 bitALTERA_DATA0; // 0xA0 is the bit address of PORT C +sbit at 0xA0+3 bitALTERA_DCLK; + + +#define bmALTERA_BITS (bmALTERA_DATA0 \ + | bmALTERA_NCONFIG \ + | bmALTERA_DCLK \ + | bmALTERA_CONF_DONE \ + | bmALTERA_NSTATUS) + +#define bmPORT_C_OUTPUTS (bmPC_nRESET \ + | bmALTERA_DATA0 \ + | bmALTERA_NCONFIG \ + | bmALTERA_DCLK \ + | bmPC_LED0 \ + | bmPC_LED1 \ + ) + +#define bmPORT_C_INITIAL (bmPC_LED0 | bmPC_LED1) + + +#define USRP_LED_REG USRP_PC +#define bmLED0 bmPC_LED0 +#define bmLED1 bmPC_LED1 + + +/* Port D: GPIF FD[15:8] */ + +/* Port E: not bit addressible */ + +#define USRP_PE IOE // Port E +#define USRP_PE_OE OEE // Port E direction register + +#define bmPE_PE0 bmBIT0 // GPIF debug output +#define bmPE_PE1 bmBIT1 // GPIF debug output +#define bmPE_PE2 bmBIT2 // GPIF debug output +#define bmPE_FPGA_CLR_STATUS bmBIT3 // misc pin to FPGA (clear status) +#define bmPE_SEN_TX_A bmBIT4 // serial enable d'board TX A (active low) +#define bmPE_SEN_RX_A bmBIT5 // serial enable d'board RX A (active low) +#define bmPE_SEN_TX_B bmBIT6 // serial enable d'board TX B (active low) +#define bmPE_SEN_RX_B bmBIT7 // serial enable d'board RX B (active low) + + +#define bmPORT_E_OUTPUTS (bmPE_FPGA_CLR_STATUS \ + | bmPE_SEN_TX_A \ + | bmPE_SEN_RX_A \ + | bmPE_SEN_TX_B \ + | bmPE_SEN_RX_B \ + ) + + +#define bmPORT_E_INITIAL (bmPE_SEN_TX_A \ + | bmPE_SEN_RX_A \ + | bmPE_SEN_TX_B \ + | bmPE_SEN_RX_B \ + ) + +/* + * FPGA output lines that are tied to FX2 RDYx inputs. + * These are readable using GPIFREADYSTAT. + */ +#define bmFPGA_HAS_SPACE bmBIT0 // usbrdy[0] has room for 512 byte packet +#define bmFPGA_PKT_AVAIL bmBIT1 // usbrdy[1] has >= 512 bytes available +// #define bmTX_UNDERRUN bmBIT2 // usbrdy[2] D/A ran out of data +// #define bmRX_OVERRUN bmBIT3 // usbrdy[3] A/D ran out of buffer + +/* + * FPGA input lines that are tied to the FX2 CTLx outputs. + * + * These are controlled by the GPIF microprogram... + */ +// WR bmBIT0 // usbctl[0] +// RD bmBIT1 // usbctl[1] +// OE bmBIT2 // usbctl[2] + +#endif /* _USRP_REV1_REGS_H_ */ diff --git a/firmware/fx2/src/usrp1/vectors.a51 b/firmware/fx2/src/usrp1/vectors.a51 new file mode 100644 index 000000000..fa579ba8a --- /dev/null +++ b/firmware/fx2/src/usrp1/vectors.a51 @@ -0,0 +1 @@ + .include "../common/vectors.a51" |