diff options
Diffstat (limited to 'firmware/fx2/lib/usb_common.c')
| -rw-r--r-- | firmware/fx2/lib/usb_common.c | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/firmware/fx2/lib/usb_common.c b/firmware/fx2/lib/usb_common.c new file mode 100644 index 000000000..3b0547b2f --- /dev/null +++ b/firmware/fx2/lib/usb_common.c @@ -0,0 +1,386 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "usb_common.h" +#include "fx2regs.h" +#include "syncdelay.h" +#include "fx2utils.h" +#include "isr.h" +#include "usb_descriptors.h" +#include "usb_requests.h" + +extern xdata char str0[]; +extern xdata char str1[]; +extern xdata char str2[]; +extern xdata char str3[]; +extern xdata char str4[]; +extern xdata char str5[]; + + +#define bRequestType SETUPDAT[0] +#define bRequest SETUPDAT[1] +#define wValueL SETUPDAT[2] +#define wValueH SETUPDAT[3] +#define wIndexL SETUPDAT[4] +#define wIndexH SETUPDAT[5] +#define wLengthL SETUPDAT[6] +#define wLengthH SETUPDAT[7] + +#define MSB(x) (((unsigned short) x) >> 8) +#define LSB(x) (((unsigned short) x) & 0xff) + +volatile bit _usb_got_SUDAV; + +unsigned char _usb_config = 0; +unsigned char _usb_alt_setting = 0; // FIXME really 1/interface + +xdata unsigned char *current_device_descr; +xdata unsigned char *current_devqual_descr; +xdata unsigned char *current_config_descr; +xdata unsigned char *other_config_descr; + +static void +setup_descriptors (void) +{ + if (USBCS & bmHSM){ // high speed mode + current_device_descr = high_speed_device_descr; + current_devqual_descr = high_speed_devqual_descr; + current_config_descr = high_speed_config_descr; + other_config_descr = full_speed_config_descr; + } + else { + current_device_descr = full_speed_device_descr; + current_devqual_descr = full_speed_devqual_descr; + current_config_descr = full_speed_config_descr; + other_config_descr = high_speed_config_descr; + } + + // whack the type fields + // FIXME, may not be required. + // current_config_descr[1] = DT_CONFIG; + // other_config_descr[1] = DT_OTHER_SPEED; +} + +static void +isr_SUDAV (void) interrupt +{ + clear_usb_irq (); + _usb_got_SUDAV = 1; +} + +static void +isr_USBRESET (void) interrupt +{ + clear_usb_irq (); + setup_descriptors (); +} + +static void +isr_HIGHSPEED (void) interrupt +{ + clear_usb_irq (); + setup_descriptors (); +} + +void +usb_install_handlers (void) +{ + setup_descriptors (); // ensure that they're set before use + + hook_uv (UV_SUDAV, (unsigned short) isr_SUDAV); + hook_uv (UV_USBRESET, (unsigned short) isr_USBRESET); + hook_uv (UV_HIGHSPEED, (unsigned short) isr_HIGHSPEED); + + USBIE = bmSUDAV | bmURES | bmHSGRANT; +} + +// On the FX2 the only plausible endpoints are 0, 1, 2, 4, 6, 8 +// This doesn't check to see that they're enabled + +unsigned char +plausible_endpoint (unsigned char ep) +{ + ep &= ~0x80; // ignore direction bit + + if (ep > 8) + return 0; + + if (ep == 1) + return 1; + + return (ep & 0x1) == 0; // must be even +} + +// return pointer to control and status register for endpoint. +// only called with plausible_endpoints + +xdata volatile unsigned char * +epcs (unsigned char ep) +{ + if (ep == 0x01) // ep1 has different in and out CS regs + return EP1OUTCS; + + if (ep == 0x81) + return EP1INCS; + + ep &= ~0x80; // ignore direction bit + + if (ep == 0x00) // ep0 + return EP0CS; + + return EP2CS + (ep >> 1); // 2, 4, 6, 8 are consecutive +} + +void +usb_handle_setup_packet (void) +{ + _usb_got_SUDAV = 0; + + // handle the standard requests... + + switch (bRequestType & bmRT_TYPE_MASK){ + + case bmRT_TYPE_CLASS: + case bmRT_TYPE_RESERVED: + fx2_stall_ep0 (); // we don't handle these. indicate error + break; + + case bmRT_TYPE_VENDOR: + // call the application code. + // If it handles the command it returns non-zero + + if (!app_vendor_cmd ()) + fx2_stall_ep0 (); + break; + + case bmRT_TYPE_STD: + // these are the standard requests... + + if ((bRequestType & bmRT_DIR_MASK) == bmRT_DIR_IN){ + + //////////////////////////////////// + // handle the IN requests + //////////////////////////////////// + + switch (bRequest){ + + case RQ_GET_CONFIG: + EP0BUF[0] = _usb_config; // FIXME app should handle + EP0BCH = 0; + EP0BCL = 1; + break; + + // -------------------------------- + + case RQ_GET_INTERFACE: + EP0BUF[0] = _usb_alt_setting; // FIXME app should handle + EP0BCH = 0; + EP0BCL = 1; + break; + + // -------------------------------- + + case RQ_GET_DESCR: + switch (wValueH){ + + case DT_DEVICE: + SUDPTRH = MSB (current_device_descr); + SUDPTRL = LSB (current_device_descr); + break; + + case DT_DEVQUAL: + SUDPTRH = MSB (current_devqual_descr); + SUDPTRL = LSB (current_devqual_descr); + break; + + case DT_CONFIG: + if (0 && wValueL != 1) // FIXME only a single configuration + fx2_stall_ep0 (); + else { + SUDPTRH = MSB (current_config_descr); + SUDPTRL = LSB (current_config_descr); + } + break; + + case DT_OTHER_SPEED: + if (0 && wValueL != 1) // FIXME only a single configuration + fx2_stall_ep0 (); + else { + SUDPTRH = MSB (other_config_descr); + SUDPTRL = LSB (other_config_descr); + } + break; + + case DT_STRING: + if (wValueL >= nstring_descriptors) + fx2_stall_ep0 (); + else { + xdata char *p = string_descriptors[wValueL]; + SUDPTRH = MSB (p); + SUDPTRL = LSB (p); + } + break; + + default: + fx2_stall_ep0 (); // invalid request + break; + } + break; + + // -------------------------------- + + case RQ_GET_STATUS: + switch (bRequestType & bmRT_RECIP_MASK){ + case bmRT_RECIP_DEVICE: + EP0BUF[0] = bmGSDA_SELF_POWERED; // FIXME app should handle + EP0BUF[1] = 0; + EP0BCH = 0; + EP0BCL = 2; + break; + + case bmRT_RECIP_INTERFACE: + EP0BUF[0] = 0; + EP0BUF[1] = 0; + EP0BCH = 0; + EP0BCL = 2; + break; + + case bmRT_RECIP_ENDPOINT: + if (plausible_endpoint (wIndexL)){ + EP0BUF[0] = *epcs (wIndexL) & bmEPSTALL; + EP0BUF[1] = 0; + EP0BCH = 0; + EP0BCL = 2; + } + else + fx2_stall_ep0 (); + break; + + default: + fx2_stall_ep0 (); + break; + } + break; + + // -------------------------------- + + case RQ_SYNCH_FRAME: // not implemented + default: + fx2_stall_ep0 (); + break; + } + } + + else { + + //////////////////////////////////// + // handle the OUT requests + //////////////////////////////////// + + switch (bRequest){ + + case RQ_SET_CONFIG: + _usb_config = wValueL; // FIXME app should handle + break; + + case RQ_SET_INTERFACE: + _usb_alt_setting = wValueL; // FIXME app should handle + break; + + // -------------------------------- + + case RQ_CLEAR_FEATURE: + switch (bRequestType & bmRT_RECIP_MASK){ + + case bmRT_RECIP_DEVICE: + switch (wValueL){ + case FS_DEV_REMOTE_WAKEUP: + default: + fx2_stall_ep0 (); + } + break; + + case bmRT_RECIP_ENDPOINT: + if (wValueL == FS_ENDPOINT_HALT && plausible_endpoint (wIndexL)){ + *epcs (wIndexL) &= ~bmEPSTALL; + fx2_reset_data_toggle (wIndexL); + } + else + fx2_stall_ep0 (); + break; + + default: + fx2_stall_ep0 (); + break; + } + break; + + // -------------------------------- + + case RQ_SET_FEATURE: + switch (bRequestType & bmRT_RECIP_MASK){ + + case bmRT_RECIP_DEVICE: + switch (wValueL){ + case FS_TEST_MODE: + // hardware handles this after we complete SETUP phase handshake + break; + + case FS_DEV_REMOTE_WAKEUP: + default: + fx2_stall_ep0 (); + break; + } + } + break; + + case bmRT_RECIP_ENDPOINT: + switch (wValueL){ + case FS_ENDPOINT_HALT: + if (plausible_endpoint (wIndexL)) + *epcs (wIndexL) |= bmEPSTALL; + else + fx2_stall_ep0 (); + break; + + default: + fx2_stall_ep0 (); + break; + } + break; + + // -------------------------------- + + case RQ_SET_ADDRESS: // handled by fx2 hardware + case RQ_SET_DESCR: // not implemented + default: + fx2_stall_ep0 (); + } + + } + break; + + } // bmRT_TYPE_MASK + + // ack handshake phase of device request + EP0CS |= bmHSNAK; +} |