diff options
Diffstat (limited to 'firmware/fx2/common')
40 files changed, 5075 insertions, 0 deletions
diff --git a/firmware/fx2/common/.gitignore b/firmware/fx2/common/.gitignore new file mode 100644 index 000000000..04f253234 --- /dev/null +++ b/firmware/fx2/common/.gitignore @@ -0,0 +1,18 @@ +/*.ihx +/*.lnk +/*.lst +/*.map +/*.mem +/*.rel +/*.rst +/*.sym +/blink_leds.asm +/usrp_common.asm +/command_loop.asm +/fpga.asm +/*.asm +/usrp_gpif.c +/usrp_gpif_inline.h +/*.lib +/Makefile +/Makefile.in diff --git a/firmware/fx2/common/_startup.a51 b/firmware/fx2/common/_startup.a51 new file mode 100644 index 000000000..30a907857 --- /dev/null +++ b/firmware/fx2/common/_startup.a51 @@ -0,0 +1,80 @@ +;;; -*- asm -*- +;;; +;;; Copyright 2003,2004 Free Software Foundation, Inc. +;;; +;;; This file is part of GNU Radio +;;; +;;; GNU Radio is free software; you can redistribute it and/or modify +;;; it under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3, or (at your option) +;;; any later version. +;;; +;;; GNU Radio is distributed in the hope that it will be useful, +;;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Radio; see the file COPYING. If not, write to +;;; the Free Software Foundation, Inc., 51 Franklin Street, +;;; Boston, MA 02110-1301, USA. + + +;;; The default external memory initialization provided by sdcc is not +;;; appropriate to the FX2. This is derived from the sdcc code, but uses +;;; the FX2 specific _MPAGE sfr. + + + ;; .area XISEG (XDATA) ; the initialized external data area + ;; .area XINIT (CODE) ; the code space consts to init XISEG + .area XSEG (XDATA) ; zero initialized xdata + .area USBDESCSEG (XDATA) ; usb descriptors + + + .area CSEG (CODE) + + ;; sfr that sets upper address byte of MOVX using @r0 or @r1 + _MPAGE = 0x0092 + +__sdcc_external_startup:: + ;; This system is now compiled with the --no-xinit-opt + ;; which means that any initialized XDATA is handled + ;; inline by code in the GSINIT segs emitted for each file. + ;; + ;; We zero XSEG and all of the internal ram to ensure + ;; a known good state for uninitialized variables. + +; _mcs51_genRAMCLEAR() start + mov r0,#l_XSEG + mov a,r0 + orl a,#(l_XSEG >> 8) + jz 00002$ + mov r1,#((l_XSEG + 255) >> 8) + mov dptr,#s_XSEG + clr a + +00001$: movx @dptr,a + inc dptr + djnz r0,00001$ + djnz r1,00001$ + + ;; We're about to clear internal memory. This will overwrite + ;; the stack which contains our return address. + ;; Pop our return address into DPH, DPL +00002$: pop dph + pop dpl + + ;; R0 and A contain 0. This loop will execute 256 times. + ;; + ;; FWIW the first iteration writes direct address 0x00, + ;; which is the location of r0. We get lucky, we're + ;; writing the correct value (0) + +00003$: mov @r0,a + djnz r0,00003$ + + push dpl ; restore our return address + push dph + + mov dpl,#0 ; indicate that data init is still required + ret diff --git a/firmware/fx2/common/_startup.a51.brittle b/firmware/fx2/common/_startup.a51.brittle new file mode 100644 index 000000000..2996275cf --- /dev/null +++ b/firmware/fx2/common/_startup.a51.brittle @@ -0,0 +1,78 @@ +;;; -*- asm -*- +;;; +;;; Copyright 2003 Free Software Foundation, Inc. +;;; +;;; This file is part of GNU Radio +;;; +;;; GNU Radio is free software; you can redistribute it and/or modify +;;; it under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3, or (at your option) +;;; any later version. +;;; +;;; GNU Radio is distributed in the hope that it will be useful, +;;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Radio; see the file COPYING. If not, write to +;;; the Free Software Foundation, Inc., 51 Franklin Street, +;;; Boston, MA 02110-1301, USA. + + +;;; The default external memory initialization provided by sdcc is not +;;; appropriate to the FX2. This is derived from the sdcc code, but uses +;;; the FX2 specific _MPAGE sfr. + + + .area XISEG (XDATA) ; the initialized external data area + .area XINIT (CODE) ; the code space consts to init XISEG + .area XSEG (XDATA) ; zero initialized xdata + .area USBDESCSEG (XDATA); usb descriptors + + + ;; BIG TIME KLUDGE! + ;; Look at usrp_main.rst and count the bytes from our + ;; "normal return location" to the first instruction following + ;; the comment: "_mcs51_getRAMCLEAR () start" + + INSTRUCTION_BYTES_TO_SKIP = 0x29 ; valid for sdcc 2.4.0 + + + .area CSEG (CODE) + + ;; sfr that sets upper address byte of MOVX using @r0 or @r1 + _MPAGE = 0x0092 + +__sdcc_external_startup:: +; _mcs51_genXINIT() start + mov r1,#l_XINIT + mov a,r1 + orl a,#(l_XINIT >> 8) + jz 00003$ + mov r2,#((l_XINIT+255) >> 8) + mov dptr,#s_XINIT + mov r0,#s_XISEG + mov _MPAGE,#(s_XISEG >> 8) +00001$: clr a + movc a,@a+dptr + movx @r0,a + inc dptr + inc r0 + cjne r0,#0,00002$ + inc _MPAGE +00002$: djnz r1,00001$ + djnz r2,00001$ + mov _MPAGE,#0xFF +00003$: + + ;; Danger! Total KLUDGE! + ;; We pop the return address, add a magic number to it + ;; then jump to that address. Believe it or not, this + ;; looks like the least kludgy way to handle this, + ;; short of patching the compiler... + + pop dph + pop dpl + mov a,#INSTRUCTION_BYTES_TO_SKIP + jmp @a+dptr diff --git a/firmware/fx2/common/delay.c b/firmware/fx2/common/delay.c new file mode 100644 index 000000000..13cf0eec8 --- /dev/null +++ b/firmware/fx2/common/delay.c @@ -0,0 +1,76 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +/* + * Delay approximately 1 microsecond (including overhead in udelay). + */ +static void +udelay1 (void) _naked +{ + _asm ; lcall that got us here took 4 bus cycles + ret ; 4 bus cycles + _endasm; +} + +/* + * delay for approximately usecs microseconds + */ +void +udelay (unsigned char usecs) +{ + do { + udelay1 (); + } while (--usecs != 0); +} + + +/* + * Delay approximately 1 millisecond. + * We're running at 48 MHz, so we need 48,000 clock cycles. + * + * Note however, that each bus cycle takes 4 clock cycles (not obvious, + * but explains the factor of 4 problem below). + */ +static void +mdelay1 (void) _naked +{ + _asm + mov dptr,#(-1200 & 0xffff) +002$: + inc dptr ; 3 bus cycles + mov a, dpl ; 2 bus cycles + orl a, dph ; 2 bus cycles + jnz 002$ ; 3 bus cycles + + ret + _endasm; +} + +void +mdelay (unsigned int msecs) +{ + do { + mdelay1 (); + } while (--msecs != 0); +} + + diff --git a/firmware/fx2/common/delay.h b/firmware/fx2/common/delay.h new file mode 100644 index 000000000..f5df779e1 --- /dev/null +++ b/firmware/fx2/common/delay.h @@ -0,0 +1,38 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _DELAY_H_ +#define _DELAY_H_ + +/* + * delay for approximately usecs microseconds + * Note limit of 255 usecs. + */ +void udelay (unsigned char usecs); + +/* + * delay for approximately msecs milliseconds + */ +void mdelay (unsigned short msecs); + + +#endif /* _DELAY_H_ */ diff --git a/firmware/fx2/common/eeprom_boot.a51 b/firmware/fx2/common/eeprom_boot.a51 new file mode 100644 index 000000000..65e452668 --- /dev/null +++ b/firmware/fx2/common/eeprom_boot.a51 @@ -0,0 +1,573 @@ +;-------------------------------------------------------- +; Hand tweaked minimal eeprom boot code +;-------------------------------------------------------- + .module eeprom_boot + .optsdcc -mmcs51 --model-small + +;-------------------------------------------------------- +; Public variables in this module +;-------------------------------------------------------- + .globl _eeprom_init + .globl _EP8FIFOBUF + .globl _EP6FIFOBUF + .globl _EP4FIFOBUF + .globl _EP2FIFOBUF + .globl _EP1INBUF + .globl _EP1OUTBUF + .globl _EP0BUF + .globl _CT4 + .globl _CT3 + .globl _CT2 + .globl _CT1 + .globl _USBTEST + .globl _TESTCFG + .globl _DBUG + .globl _UDMACRCQUAL + .globl _UDMACRCL + .globl _UDMACRCH + .globl _GPIFHOLDAMOUNT + .globl _FLOWSTBHPERIOD + .globl _FLOWSTBEDGE + .globl _FLOWSTB + .globl _FLOWHOLDOFF + .globl _FLOWEQ1CTL + .globl _FLOWEQ0CTL + .globl _FLOWLOGIC + .globl _FLOWSTATE + .globl _GPIFABORT + .globl _GPIFREADYSTAT + .globl _GPIFREADYCFG + .globl _XGPIFSGLDATLNOX + .globl _XGPIFSGLDATLX + .globl _XGPIFSGLDATH + .globl _EP8GPIFTRIG + .globl _EP8GPIFPFSTOP + .globl _EP8GPIFFLGSEL + .globl _EP6GPIFTRIG + .globl _EP6GPIFPFSTOP + .globl _EP6GPIFFLGSEL + .globl _EP4GPIFTRIG + .globl _EP4GPIFPFSTOP + .globl _EP4GPIFFLGSEL + .globl _EP2GPIFTRIG + .globl _EP2GPIFPFSTOP + .globl _EP2GPIFFLGSEL + .globl _GPIFTCB0 + .globl _GPIFTCB1 + .globl _GPIFTCB2 + .globl _GPIFTCB3 + .globl _GPIFADRL + .globl _GPIFADRH + .globl _GPIFCTLCFG + .globl _GPIFIDLECTL + .globl _GPIFIDLECS + .globl _GPIFWFSELECT + .globl _SETUPDAT + .globl _SUDPTRCTL + .globl _SUDPTRL + .globl _SUDPTRH + .globl _EP8FIFOBCL + .globl _EP8FIFOBCH + .globl _EP6FIFOBCL + .globl _EP6FIFOBCH + .globl _EP4FIFOBCL + .globl _EP4FIFOBCH + .globl _EP2FIFOBCL + .globl _EP2FIFOBCH + .globl _EP8FIFOFLGS + .globl _EP6FIFOFLGS + .globl _EP4FIFOFLGS + .globl _EP2FIFOFLGS + .globl _EP8CS + .globl _EP6CS + .globl _EP4CS + .globl _EP2CS + .globl _EP1INCS + .globl _EP1OUTCS + .globl _EP0CS + .globl _EP8BCL + .globl _EP8BCH + .globl _EP6BCL + .globl _EP6BCH + .globl _EP4BCL + .globl _EP4BCH + .globl _EP2BCL + .globl _EP2BCH + .globl _EP1INBC + .globl _EP1OUTBC + .globl _EP0BCL + .globl _EP0BCH + .globl _FNADDR + .globl _MICROFRAME + .globl _USBFRAMEL + .globl _USBFRAMEH + .globl _TOGCTL + .globl _WAKEUPCS + .globl _SUSPEND + .globl _USBCS + .globl _XAUTODAT2 + .globl _XAUTODAT1 + .globl _I2CTL + .globl _I2DAT + .globl _I2CS + .globl _PORTECFG + .globl _PORTCCFG + .globl _PORTACFG + .globl _INTSETUP + .globl _INT4IVEC + .globl _INT2IVEC + .globl _CLRERRCNT + .globl _ERRCNTLIM + .globl _USBERRIRQ + .globl _USBERRIE + .globl _GPIFIRQ + .globl _GPIFIE + .globl _EPIRQ + .globl _EPIE + .globl _USBIRQ + .globl _USBIE + .globl _NAKIRQ + .globl _NAKIE + .globl _IBNIRQ + .globl _IBNIE + .globl _EP8FIFOIRQ + .globl _EP8FIFOIE + .globl _EP6FIFOIRQ + .globl _EP6FIFOIE + .globl _EP4FIFOIRQ + .globl _EP4FIFOIE + .globl _EP2FIFOIRQ + .globl _EP2FIFOIE + .globl _OUTPKTEND + .globl _INPKTEND + .globl _EP8ISOINPKTS + .globl _EP6ISOINPKTS + .globl _EP4ISOINPKTS + .globl _EP2ISOINPKTS + .globl _EP8FIFOPFL + .globl _EP8FIFOPFH + .globl _EP6FIFOPFL + .globl _EP6FIFOPFH + .globl _EP4FIFOPFL + .globl _EP4FIFOPFH + .globl _EP2FIFOPFL + .globl _EP2FIFOPFH + .globl _EP8AUTOINLENL + .globl _EP8AUTOINLENH + .globl _EP6AUTOINLENL + .globl _EP6AUTOINLENH + .globl _EP4AUTOINLENL + .globl _EP4AUTOINLENH + .globl _EP2AUTOINLENL + .globl _EP2AUTOINLENH + .globl _EP8FIFOCFG + .globl _EP6FIFOCFG + .globl _EP4FIFOCFG + .globl _EP2FIFOCFG + .globl _EP8CFG + .globl _EP6CFG + .globl _EP4CFG + .globl _EP2CFG + .globl _EP1INCFG + .globl _EP1OUTCFG + .globl _REVCTL + .globl _REVID + .globl _FIFOPINPOLAR + .globl _UART230 + .globl _BPADDRL + .globl _BPADDRH + .globl _BREAKPT + .globl _FIFORESET + .globl _PINFLAGSCD + .globl _PINFLAGSAB + .globl _IFCONFIG + .globl _CPUCS + .globl _RES_WAVEDATA_END + .globl _GPIF_WAVE_DATA +;-------------------------------------------------------- +; special function registers +;-------------------------------------------------------- +_IOA = 0x0080 +_SP = 0x0081 +_DPL = 0x0082 +_DPH = 0x0083 +_DPL1 = 0x0084 +_DPH1 = 0x0085 +_DPS = 0x0086 +_PCON = 0x0087 +_TCON = 0x0088 +_TMOD = 0x0089 +_TL0 = 0x008a +_TL1 = 0x008b +_TH0 = 0x008c +_TH1 = 0x008d +_CKCON = 0x008e +_IOB = 0x0090 +_EXIF = 0x0091 +_MPAGE = 0x0092 +_SCON0 = 0x0098 +_SBUF0 = 0x0099 +_APTR1H = 0x009a +_APTR1L = 0x009b +_AUTODAT1 = 0x009c +_AUTOPTRH2 = 0x009d +_AUTOPTRL2 = 0x009e +_AUTODAT2 = 0x009f +_IOC = 0x00a0 +_INT2CLR = 0x00a1 +_INT4CLR = 0x00a2 +_IE = 0x00a8 +_EP2468STAT = 0x00aa +_EP24FIFOFLGS = 0x00ab +_EP68FIFOFLGS = 0x00ac +_AUTOPTRSETUP = 0x00af +_IOD = 0x00b0 +_IOE = 0x00b1 +_OEA = 0x00b2 +_OEB = 0x00b3 +_OEC = 0x00b4 +_OED = 0x00b5 +_OEE = 0x00b6 +_IP = 0x00b8 +_EP01STAT = 0x00ba +_GPIFTRIG = 0x00bb +_GPIFSGLDATH = 0x00bd +_GPIFSGLDATLX = 0x00be +_GPIFSGLDATLNOX = 0x00bf +_SCON1 = 0x00c0 +_SBUF1 = 0x00c1 +_T2CON = 0x00c8 +_RCAP2L = 0x00ca +_RCAP2H = 0x00cb +_TL2 = 0x00cc +_TH2 = 0x00cd +_PSW = 0x00d0 +_EICON = 0x00d8 +_ACC = 0x00e0 +_EIE = 0x00e8 +_B = 0x00f0 +_EIP = 0x00f8 +;-------------------------------------------------------- +; special function bits +;-------------------------------------------------------- +_SEL = 0x0086 +_IT0 = 0x0088 +_IE0 = 0x0089 +_IT1 = 0x008a +_IE1 = 0x008b +_TR0 = 0x008c +_TF0 = 0x008d +_TR1 = 0x008e +_TF1 = 0x008f +_RI = 0x0098 +_TI = 0x0099 +_RB8 = 0x009a +_TB8 = 0x009b +_REN = 0x009c +_SM2 = 0x009d +_SM1 = 0x009e +_SM0 = 0x009f +_EX0 = 0x00a8 +_ET0 = 0x00a9 +_EX1 = 0x00aa +_ET1 = 0x00ab +_ES0 = 0x00ac +_ET2 = 0x00ad +_ES1 = 0x00ae +_EA = 0x00af +_PX0 = 0x00b8 +_PT0 = 0x00b9 +_PX1 = 0x00ba +_PT1 = 0x00bb +_PS0 = 0x00bc +_PT2 = 0x00bd +_PS1 = 0x00be +_RI1 = 0x00c0 +_TI1 = 0x00c1 +_RB81 = 0x00c2 +_TB81 = 0x00c3 +_REN1 = 0x00c4 +_SM21 = 0x00c5 +_SM11 = 0x00c6 +_SM01 = 0x00c7 +_CP_RL2 = 0x00c8 +_C_T2 = 0x00c9 +_TR2 = 0x00ca +_EXEN2 = 0x00cb +_TCLK = 0x00cc +_RCLK = 0x00cd +_EXF2 = 0x00ce +_TF2 = 0x00cf +_P = 0x00d0 +_FL = 0x00d1 +_OV = 0x00d2 +_RS0 = 0x00d3 +_RS1 = 0x00d4 +_F0 = 0x00d5 +_AC = 0x00d6 +_CY = 0x00d7 +_INT6 = 0x00db +_RESI = 0x00dc +_ERESI = 0x00dd +_SMOD1 = 0x00df +_EIUSB = 0x00e8 +_EI2C = 0x00e9 +_EIEX4 = 0x00ea +_EIEX5 = 0x00eb +_EIEX6 = 0x00ec +_PUSB = 0x00f8 +_PI2C = 0x00f9 +_EIPX4 = 0x00fa +_EIPX5 = 0x00fb +_EIPX6 = 0x00fc +_bitS_CLK = 0x0080 +_bitS_OUT = 0x0081 +_bitS_IN = 0x0082 +_bitALTERA_DATA0 = 0x00a1 +_bitALTERA_DCLK = 0x00a3 +;-------------------------------------------------------- +; overlayable register banks +;-------------------------------------------------------- + .area REG_BANK_0 (REL,OVR,DATA) + .ds 8 +;-------------------------------------------------------- +; internal ram data +;-------------------------------------------------------- + .area DSEG (DATA) +;-------------------------------------------------------- +; overlayable items in internal ram +;-------------------------------------------------------- + .area OSEG (OVR,DATA) +;-------------------------------------------------------- +; Stack segment in internal ram +;-------------------------------------------------------- + .area SSEG (DATA) +__start__stack: + .ds 1 + +;-------------------------------------------------------- +; indirectly addressable internal ram data +;-------------------------------------------------------- + .area ISEG (DATA) +;-------------------------------------------------------- +; bit data +;-------------------------------------------------------- + .area BSEG (BIT) +;-------------------------------------------------------- +; external ram data +;-------------------------------------------------------- + .area XSEG (XDATA) +_GPIF_WAVE_DATA = 0xe400 +_RES_WAVEDATA_END = 0xe480 +_CPUCS = 0xe600 +_IFCONFIG = 0xe601 +_PINFLAGSAB = 0xe602 +_PINFLAGSCD = 0xe603 +_FIFORESET = 0xe604 +_BREAKPT = 0xe605 +_BPADDRH = 0xe606 +_BPADDRL = 0xe607 +_UART230 = 0xe608 +_FIFOPINPOLAR = 0xe609 +_REVID = 0xe60a +_REVCTL = 0xe60b +_EP1OUTCFG = 0xe610 +_EP1INCFG = 0xe611 +_EP2CFG = 0xe612 +_EP4CFG = 0xe613 +_EP6CFG = 0xe614 +_EP8CFG = 0xe615 +_EP2FIFOCFG = 0xe618 +_EP4FIFOCFG = 0xe619 +_EP6FIFOCFG = 0xe61a +_EP8FIFOCFG = 0xe61b +_EP2AUTOINLENH = 0xe620 +_EP2AUTOINLENL = 0xe621 +_EP4AUTOINLENH = 0xe622 +_EP4AUTOINLENL = 0xe623 +_EP6AUTOINLENH = 0xe624 +_EP6AUTOINLENL = 0xe625 +_EP8AUTOINLENH = 0xe626 +_EP8AUTOINLENL = 0xe627 +_EP2FIFOPFH = 0xe630 +_EP2FIFOPFL = 0xe631 +_EP4FIFOPFH = 0xe632 +_EP4FIFOPFL = 0xe633 +_EP6FIFOPFH = 0xe634 +_EP6FIFOPFL = 0xe635 +_EP8FIFOPFH = 0xe636 +_EP8FIFOPFL = 0xe637 +_EP2ISOINPKTS = 0xe640 +_EP4ISOINPKTS = 0xe641 +_EP6ISOINPKTS = 0xe642 +_EP8ISOINPKTS = 0xe643 +_INPKTEND = 0xe648 +_OUTPKTEND = 0xe649 +_EP2FIFOIE = 0xe650 +_EP2FIFOIRQ = 0xe651 +_EP4FIFOIE = 0xe652 +_EP4FIFOIRQ = 0xe653 +_EP6FIFOIE = 0xe654 +_EP6FIFOIRQ = 0xe655 +_EP8FIFOIE = 0xe656 +_EP8FIFOIRQ = 0xe657 +_IBNIE = 0xe658 +_IBNIRQ = 0xe659 +_NAKIE = 0xe65a +_NAKIRQ = 0xe65b +_USBIE = 0xe65c +_USBIRQ = 0xe65d +_EPIE = 0xe65e +_EPIRQ = 0xe65f +_GPIFIE = 0xe660 +_GPIFIRQ = 0xe661 +_USBERRIE = 0xe662 +_USBERRIRQ = 0xe663 +_ERRCNTLIM = 0xe664 +_CLRERRCNT = 0xe665 +_INT2IVEC = 0xe666 +_INT4IVEC = 0xe667 +_INTSETUP = 0xe668 +_PORTACFG = 0xe670 +_PORTCCFG = 0xe671 +_PORTECFG = 0xe672 +_I2CS = 0xe678 +_I2DAT = 0xe679 +_I2CTL = 0xe67a +_XAUTODAT1 = 0xe67b +_XAUTODAT2 = 0xe67c +_USBCS = 0xe680 +_SUSPEND = 0xe681 +_WAKEUPCS = 0xe682 +_TOGCTL = 0xe683 +_USBFRAMEH = 0xe684 +_USBFRAMEL = 0xe685 +_MICROFRAME = 0xe686 +_FNADDR = 0xe687 +_EP0BCH = 0xe68a +_EP0BCL = 0xe68b +_EP1OUTBC = 0xe68d +_EP1INBC = 0xe68f +_EP2BCH = 0xe690 +_EP2BCL = 0xe691 +_EP4BCH = 0xe694 +_EP4BCL = 0xe695 +_EP6BCH = 0xe698 +_EP6BCL = 0xe699 +_EP8BCH = 0xe69c +_EP8BCL = 0xe69d +_EP0CS = 0xe6a0 +_EP1OUTCS = 0xe6a1 +_EP1INCS = 0xe6a2 +_EP2CS = 0xe6a3 +_EP4CS = 0xe6a4 +_EP6CS = 0xe6a5 +_EP8CS = 0xe6a6 +_EP2FIFOFLGS = 0xe6a7 +_EP4FIFOFLGS = 0xe6a8 +_EP6FIFOFLGS = 0xe6a9 +_EP8FIFOFLGS = 0xe6aa +_EP2FIFOBCH = 0xe6ab +_EP2FIFOBCL = 0xe6ac +_EP4FIFOBCH = 0xe6ad +_EP4FIFOBCL = 0xe6ae +_EP6FIFOBCH = 0xe6af +_EP6FIFOBCL = 0xe6b0 +_EP8FIFOBCH = 0xe6b1 +_EP8FIFOBCL = 0xe6b2 +_SUDPTRH = 0xe6b3 +_SUDPTRL = 0xe6b4 +_SUDPTRCTL = 0xe6b5 +_SETUPDAT = 0xe6b8 +_GPIFWFSELECT = 0xe6c0 +_GPIFIDLECS = 0xe6c1 +_GPIFIDLECTL = 0xe6c2 +_GPIFCTLCFG = 0xe6c3 +_GPIFADRH = 0xe6c4 +_GPIFADRL = 0xe6c5 +_GPIFTCB3 = 0xe6ce +_GPIFTCB2 = 0xe6cf +_GPIFTCB1 = 0xe6d0 +_GPIFTCB0 = 0xe6d1 +_EP2GPIFFLGSEL = 0xe6d2 +_EP2GPIFPFSTOP = 0xe6d3 +_EP2GPIFTRIG = 0xe6d4 +_EP4GPIFFLGSEL = 0xe6da +_EP4GPIFPFSTOP = 0xe6db +_EP4GPIFTRIG = 0xe6dc +_EP6GPIFFLGSEL = 0xe6e2 +_EP6GPIFPFSTOP = 0xe6e3 +_EP6GPIFTRIG = 0xe6e4 +_EP8GPIFFLGSEL = 0xe6ea +_EP8GPIFPFSTOP = 0xe6eb +_EP8GPIFTRIG = 0xe6ec +_XGPIFSGLDATH = 0xe6f0 +_XGPIFSGLDATLX = 0xe6f1 +_XGPIFSGLDATLNOX = 0xe6f2 +_GPIFREADYCFG = 0xe6f3 +_GPIFREADYSTAT = 0xe6f4 +_GPIFABORT = 0xe6f5 +_FLOWSTATE = 0xe6c6 +_FLOWLOGIC = 0xe6c7 +_FLOWEQ0CTL = 0xe6c8 +_FLOWEQ1CTL = 0xe6c9 +_FLOWHOLDOFF = 0xe6ca +_FLOWSTB = 0xe6cb +_FLOWSTBEDGE = 0xe6cc +_FLOWSTBHPERIOD = 0xe6cd +_GPIFHOLDAMOUNT = 0xe60c +_UDMACRCH = 0xe67d +_UDMACRCL = 0xe67e +_UDMACRCQUAL = 0xe67f +_DBUG = 0xe6f8 +_TESTCFG = 0xe6f9 +_USBTEST = 0xe6fa +_CT1 = 0xe6fb +_CT2 = 0xe6fc +_CT3 = 0xe6fd +_CT4 = 0xe6fe +_EP0BUF = 0xe740 +_EP1OUTBUF = 0xe780 +_EP1INBUF = 0xe7c0 +_EP2FIFOBUF = 0xf000 +_EP4FIFOBUF = 0xf400 +_EP6FIFOBUF = 0xf800 +_EP8FIFOBUF = 0xfc00 +;-------------------------------------------------------- +; external initialized ram data +;-------------------------------------------------------- +;-------------------------------------------------------- +; interrupt vector +;-------------------------------------------------------- + .area CSEG (CODE) +__interrupt_vect: + ljmp __sdcc_gsinit_startup +;-------------------------------------------------------- +; global & static initialisations +;-------------------------------------------------------- + .area GSINIT (CODE) + .area GSFINAL (CODE) + .area GSINIT (CODE) +__sdcc_gsinit_startup: + mov sp,#__start__stack - 1 + lcall __sdcc_external_startup + mov a,dpl + jz __sdcc_init_data + ljmp __sdcc_program_startup +__sdcc_init_data: + .area GSFINAL (CODE) + ljmp __sdcc_program_startup +;-------------------------------------------------------- +; Home +;-------------------------------------------------------- + .area HOME (CODE) + .area CSEG (CODE) +;-------------------------------------------------------- +; code +;-------------------------------------------------------- + .area CSEG (CODE) +__sdcc_program_startup: + lcall _eeprom_init +; return from _eeprom_init will spin here + sjmp . + .area CSEG (CODE) diff --git a/firmware/fx2/common/eeprom_init.c b/firmware/fx2/common/eeprom_init.c new file mode 100644 index 000000000..07902dcca --- /dev/null +++ b/firmware/fx2/common/eeprom_init.c @@ -0,0 +1,75 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "usrp_common.h" +#include "usrp_commands.h" + +/* + * the host side fpga loader code pushes an MD5 hash of the bitstream + * into hash1. + */ +#define USRP_HASH_SIZE 16 +xdata at USRP_HASH_SLOT_0_ADDR unsigned char hash0[USRP_HASH_SIZE]; + + +#define REG_RX_PWR_DN 1 +#define REG_TX_PWR_DN 8 +#define REG_TX_MODULATOR 20 + +void eeprom_init (void) +{ + unsigned short counter; + unsigned char i; + + // configure IO ports (B and D are used by GPIF) + + IOA = bmPORT_A_INITIAL; // Port A initial state + OEA = bmPORT_A_OUTPUTS; // Port A direction register + + IOC = bmPORT_C_INITIAL; // Port C initial state + OEC = bmPORT_C_OUTPUTS; // Port C direction register + + IOE = bmPORT_E_INITIAL; // Port E initial state + OEE = bmPORT_E_OUTPUTS; // Port E direction register + + EP0BCH = 0; SYNCDELAY; + + // USBCS &= ~bmRENUM; // chip firmware handles commands + USBCS = 0; // chip firmware handles commands + + //USRP_PC &= ~bmPC_nRESET; // active low reset + //USRP_PC |= bmPC_nRESET; + + // zero firmware hash slot + i = 0; + do { + hash0[i] = 0; + i++; + } while (i != USRP_HASH_SIZE); + + counter = 0; + while (1){ + counter++; + if (counter & 0x8000) + IOC ^= bmPC_LED0; + } +} diff --git a/firmware/fx2/common/fpga.h b/firmware/fx2/common/fpga.h new file mode 100644 index 000000000..6cd5de8e2 --- /dev/null +++ b/firmware/fx2/common/fpga.h @@ -0,0 +1,31 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_FPGA_H +#define INCLUDED_FPGA_H + +#include "fpga_load.h" + +#if defined(HAVE_USRP2) +#include "fpga_rev2.h" +#endif + +#endif /* INCLUDED_FPGA_H */ diff --git a/firmware/fx2/common/fpga_load.h b/firmware/fx2/common/fpga_load.h new file mode 100644 index 000000000..7c36a04c8 --- /dev/null +++ b/firmware/fx2/common/fpga_load.h @@ -0,0 +1,28 @@ +/* + * USRP - Universal Software Radio Peripheral + * + * Copyright (C) 2003 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA + */ + +#ifndef INCLUDED_FPGA_LOAD_H +#define INCLUDED_FPGA_LOAD_H + +unsigned char fpga_load_begin (void); +unsigned char fpga_load_xfer (xdata unsigned char *p, unsigned char len); +unsigned char fpga_load_end (void); + +#endif /* INCLUDED_FPGA_LOAD_H */ diff --git a/firmware/fx2/common/fpga_regs0.h b/firmware/fx2/common/fpga_regs0.h new file mode 100644 index 000000000..883798301 --- /dev/null +++ b/firmware/fx2/common/fpga_regs0.h @@ -0,0 +1,42 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _FPGA_REGS0_H_ +#define _FPGA_REGS0_H_ + +#define FR_RX_FREQ_0 0 +#define FR_RX_FREQ_1 1 +#define FR_RX_FREQ_2 2 +#define FR_RX_FREQ_3 3 +#define FR_TX_FREQ_0 4 +#define FR_TX_FREQ_1 5 +#define FR_TX_FREQ_2 6 +#define FR_TX_FREQ_3 7 +#define FR_COMBO 8 + + +#define FR_ADC_CLK_DIV 128 // pseudo regs mapped to FR_COMBO by f/w +#define FR_EXT_CLK_DIV 129 +#define FR_INTERP 130 +#define FR_DECIM 131 + +#endif diff --git a/firmware/fx2/common/fpga_regs_common.h b/firmware/fx2/common/fpga_regs_common.h new file mode 100644 index 000000000..b4a496af7 --- /dev/null +++ b/firmware/fx2/common/fpga_regs_common.h @@ -0,0 +1,150 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003,2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_FPGA_REGS_COMMON_H +#define INCLUDED_FPGA_REGS_COMMON_H + +// This file defines registers common to all FPGA configurations. +// Registers 0 to 31 are reserved for use in this file. + + +// The FPGA needs to know the rate that samples are coming from and +// going to the A/D's and D/A's. div = 128e6 / sample_rate + +#define FR_TX_SAMPLE_RATE_DIV 0 +#define FR_RX_SAMPLE_RATE_DIV 1 + +// 2 and 3 are defined in the ATR section + +#define FR_MASTER_CTRL 4 // master enable and reset controls +# define bmFR_MC_ENABLE_TX (1 << 0) +# define bmFR_MC_ENABLE_RX (1 << 1) +# define bmFR_MC_RESET_TX (1 << 2) +# define bmFR_MC_RESET_RX (1 << 3) + +// i/o direction registers for pins that go to daughterboards. +// Setting the bit makes it an output from the FPGA to the d'board. +// top 16 is mask, low 16 is value + +#define FR_OE_0 5 // slot 0 +#define FR_OE_1 6 +#define FR_OE_2 7 +#define FR_OE_3 8 + +// i/o registers for pins that go to daughterboards. +// top 16 is a mask, low 16 is value + +#define FR_IO_0 9 // slot 0 +#define FR_IO_1 10 +#define FR_IO_2 11 +#define FR_IO_3 12 + +#define FR_MODE 13 +# define bmFR_MODE_NORMAL 0 +# define bmFR_MODE_LOOPBACK (1 << 0) // enable digital loopback +# define bmFR_MODE_RX_COUNTING (1 << 1) // Rx is counting +# define bmFR_MODE_RX_COUNTING_32BIT (1 << 2) // Rx is counting with a 32 bit counter + // low and high 16 bits are multiplexed across channel I and Q + + +// If the corresponding bit is set, internal FPGA debug circuitry +// controls the i/o pins for the associated bank of daughterboard +// i/o pins. Typically used for debugging FPGA designs. + +#define FR_DEBUG_EN 14 +# define bmFR_DEBUG_EN_TX_A (1 << 0) // debug controls TX_A i/o +# define bmFR_DEBUG_EN_RX_A (1 << 1) // debug controls RX_A i/o +# define bmFR_DEBUG_EN_TX_B (1 << 2) // debug controls TX_B i/o +# define bmFR_DEBUG_EN_RX_B (1 << 3) // debug controls RX_B i/o + + +// If the corresponding bit is set, enable the automatic DC +// offset correction control loop. +// +// The 4 low bits are significant: +// +// ADC0 = (1 << 0) +// ADC1 = (1 << 1) +// ADC2 = (1 << 2) +// ADC3 = (1 << 3) +// +// This control loop works if the attached daugherboard blocks DC. +// Currently all daughterboards do block DC. This includes: +// basic rx, dbs_rx, tv_rx, flex_xxx_rx. + +#define FR_DC_OFFSET_CL_EN 15 // DC Offset Control Loop Enable + + +// offset corrections for ADC's and DAC's (2's complement) + +#define FR_ADC_OFFSET_0 16 +#define FR_ADC_OFFSET_1 17 +#define FR_ADC_OFFSET_2 18 +#define FR_ADC_OFFSET_3 19 + + +// ------------------------------------------------------------------------ +// Automatic Transmit/Receive switching +// +// If automatic transmit/receive (ATR) switching is enabled in the +// FR_ATR_CTL register, the presence or absence of data in the FPGA +// transmit fifo selects between two sets of values for each of the 4 +// banks of daughterboard i/o pins. +// +// Each daughterboard slot has 3 16-bit registers associated with it: +// FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_* +// +// FR_ATR_MASK_{0,1,2,3}: +// +// These registers determine which of the daugherboard i/o pins are +// affected by ATR switching. If a bit in the mask is set, the +// corresponding i/o bit is controlled by ATR, else it's output +// value comes from the normal i/o pin output register: +// FR_IO_{0,1,2,3}. +// +// FR_ATR_TXVAL_{0,1,2,3}: +// FR_ATR_RXVAL_{0,1,2,3}: +// +// If the Tx fifo contains data, then the bits from TXVAL that are +// selected by MASK are output. Otherwise, the bits from RXVAL that +// are selected by MASK are output. + +#define FR_ATR_MASK_0 20 // slot 0 +#define FR_ATR_TXVAL_0 21 +#define FR_ATR_RXVAL_0 22 + +#define FR_ATR_MASK_1 23 // slot 1 +#define FR_ATR_TXVAL_1 24 +#define FR_ATR_RXVAL_1 25 + +#define FR_ATR_MASK_2 26 // slot 2 +#define FR_ATR_TXVAL_2 27 +#define FR_ATR_RXVAL_2 28 + +#define FR_ATR_MASK_3 29 // slot 3 +#define FR_ATR_TXVAL_3 30 +#define FR_ATR_RXVAL_3 31 + +// Clock ticks to delay rising and falling edge of T/R signal +#define FR_ATR_TX_DELAY 2 +#define FR_ATR_RX_DELAY 3 + +#endif /* INCLUDED_FPGA_REGS_COMMON_H */ diff --git a/firmware/fx2/common/fpga_regs_common.v b/firmware/fx2/common/fpga_regs_common.v new file mode 100644 index 000000000..8035d8565 --- /dev/null +++ b/firmware/fx2/common/fpga_regs_common.v @@ -0,0 +1,117 @@ +// +// This file is machine generated from ./fpga_regs_common.h +// Do not edit by hand; your edits will be overwritten. +// + +// This file defines registers common to all FPGA configurations. +// Registers 0 to 31 are reserved for use in this file. + + +// The FPGA needs to know the rate that samples are coming from and +// going to the A/D's and D/A's. div = 128e6 / sample_rate + +`define FR_TX_SAMPLE_RATE_DIV 7'd0 +`define FR_RX_SAMPLE_RATE_DIV 7'd1 + +// 2 and 3 are defined in the ATR section + +`define FR_MASTER_CTRL 7'd4 // master enable and reset controls + +// i/o direction registers for pins that go to daughterboards. +// Setting the bit makes it an output from the FPGA to the d'board. +// top 16 is mask, low 16 is value + +`define FR_OE_0 7'd5 // slot 0 +`define FR_OE_1 7'd6 +`define FR_OE_2 7'd7 +`define FR_OE_3 7'd8 + +// i/o registers for pins that go to daughterboards. +// top 16 is a mask, low 16 is value + +`define FR_IO_0 7'd9 // slot 0 +`define FR_IO_1 7'd10 +`define FR_IO_2 7'd11 +`define FR_IO_3 7'd12 + +`define FR_MODE 7'd13 + + +// If the corresponding bit is set, internal FPGA debug circuitry +// controls the i/o pins for the associated bank of daughterboard +// i/o pins. Typically used for debugging FPGA designs. + +`define FR_DEBUG_EN 7'd14 + + +// If the corresponding bit is set, enable the automatic DC +// offset correction control loop. +// +// The 4 low bits are significant: +// +// ADC0 = (1 << 0) +// ADC1 = (1 << 1) +// ADC2 = (1 << 2) +// ADC3 = (1 << 3) +// +// This control loop works if the attached daugherboard blocks DC. +// Currently all daughterboards do block DC. This includes: +// basic rx, dbs_rx, tv_rx, flex_xxx_rx. + +`define FR_DC_OFFSET_CL_EN 7'd15 // DC Offset Control Loop Enable + + +// offset corrections for ADC's and DAC's (2's complement) + +`define FR_ADC_OFFSET_0 7'd16 +`define FR_ADC_OFFSET_1 7'd17 +`define FR_ADC_OFFSET_2 7'd18 +`define FR_ADC_OFFSET_3 7'd19 + + +// ------------------------------------------------------------------------ +// Automatic Transmit/Receive switching +// +// If automatic transmit/receive (ATR) switching is enabled in the +// FR_ATR_CTL register, the presence or absence of data in the FPGA +// transmit fifo selects between two sets of values for each of the 4 +// banks of daughterboard i/o pins. +// +// Each daughterboard slot has 3 16-bit registers associated with it: +// FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_* +// +// FR_ATR_MASK_{0,1,2,3}: +// +// These registers determine which of the daugherboard i/o pins are +// affected by ATR switching. If a bit in the mask is set, the +// corresponding i/o bit is controlled by ATR, else it's output +// value comes from the normal i/o pin output register: +// FR_IO_{0,1,2,3}. +// +// FR_ATR_TXVAL_{0,1,2,3}: +// FR_ATR_RXVAL_{0,1,2,3}: +// +// If the Tx fifo contains data, then the bits from TXVAL that are +// selected by MASK are output. Otherwise, the bits from RXVAL that +// are selected by MASK are output. + +`define FR_ATR_MASK_0 7'd20 // slot 0 +`define FR_ATR_TXVAL_0 7'd21 +`define FR_ATR_RXVAL_0 7'd22 + +`define FR_ATR_MASK_1 7'd23 // slot 1 +`define FR_ATR_TXVAL_1 7'd24 +`define FR_ATR_RXVAL_1 7'd25 + +`define FR_ATR_MASK_2 7'd26 // slot 2 +`define FR_ATR_TXVAL_2 7'd27 +`define FR_ATR_RXVAL_2 7'd28 + +`define FR_ATR_MASK_3 7'd29 // slot 3 +`define FR_ATR_TXVAL_3 7'd30 +`define FR_ATR_RXVAL_3 7'd31 + +// Clock ticks to delay rising and falling edge of T/R signal +`define FR_ATR_TX_DELAY 7'd2 +`define FR_ATR_RX_DELAY 7'd3 + diff --git a/firmware/fx2/common/fpga_regs_standard.h b/firmware/fx2/common/fpga_regs_standard.h new file mode 100644 index 000000000..7485e2bab --- /dev/null +++ b/firmware/fx2/common/fpga_regs_standard.h @@ -0,0 +1,300 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003,2004,2006 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_FPGA_REGS_STANDARD_H +#define INCLUDED_FPGA_REGS_STANDARD_H + +// Register numbers 0 to 31 are reserved for use in fpga_regs_common.h. +// Registers 64 to 79 are available for custom FPGA builds. + + +// DDC / DUC + +#define FR_INTERP_RATE 32 // [1,1024] +#define FR_DECIM_RATE 33 // [1,256] + +// DDC center freq + +#define FR_RX_FREQ_0 34 +#define FR_RX_FREQ_1 35 +#define FR_RX_FREQ_2 36 +#define FR_RX_FREQ_3 37 + +// See below for DDC Starting Phase + +// ------------------------------------------------------------------------ +// configure FPGA Rx mux +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------+-------+-------+-------+-------+-+-----+ +// | must be zero | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH | +// +-----------------------+-------+-------+-------+-------+-+-----+ +// +// There are a maximum of 4 digital downconverters in the the FPGA. +// Each DDC has two 16-bit inputs, I and Q, and two 16-bit outputs, I & Q. +// +// DDC I inputs are specified by the two bit fields I3, I2, I1 & I0 +// +// 0 = DDC input is from ADC 0 +// 1 = DDC input is from ADC 1 +// 2 = DDC input is from ADC 2 +// 3 = DDC input is from ADC 3 +// +// If Z == 1, all DDC Q inputs are set to zero +// If Z == 0, DDC Q inputs are specified by the two bit fields Q3, Q2, Q1 & Q0 +// +// NCH specifies the number of complex channels that are sent across +// the USB. The legal values are 1, 2 or 4, corresponding to 2, 4 or +// 8 16-bit values. + +#define FR_RX_MUX 38 + +// ------------------------------------------------------------------------ +// configure FPGA Tx Mux. +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------+-------+-------+-------+-------+-+-----+ +// | | DAC3 | DAC2 | DAC1 | DAC0 |0| NCH | +// +-----------------------------------------------+-------+-+-----+ +// +// NCH specifies the number of complex channels that are sent across +// the USB. The legal values are 1 or 2, corresponding to 2 or 4 +// 16-bit values. +// +// There are two interpolators with complex inputs and outputs. +// There are four DACs. (We use the DUC in each AD9862.) +// +// Each 4-bit DACx field specifies the source for the DAC and +// whether or not that DAC is enabled. Each subfield is coded +// like this: +// +// 3 2 1 0 +// +-+-----+ +// |E| N | +// +-+-----+ +// +// Where E is set if the DAC is enabled, and N specifies which +// interpolator output is connected to this DAC. +// +// N which interp output +// --- ------------------- +// 0 chan 0 I +// 1 chan 0 Q +// 2 chan 1 I +// 3 chan 1 Q + +#define FR_TX_MUX 39 + +// ------------------------------------------------------------------------ +// REFCLK control +// +// Control whether a reference clock is sent to the daughterboards, +// and what frequency. The refclk is sent on d'board i/o pin 0. +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------------------------------+-+------------+ +// | Reserved (Must be zero) |E| DIVISOR | +// +-----------------------------------------------+-+------------+ + +// +// Bit 7 -- 1 turns on refclk, 0 allows IO use +// Bits 6:0 Divider value + +#define FR_TX_A_REFCLK 40 +#define FR_RX_A_REFCLK 41 +#define FR_TX_B_REFCLK 42 +#define FR_RX_B_REFCLK 43 + +# define bmFR_REFCLK_EN 0x80 +# define bmFR_REFCLK_DIVISOR_MASK 0x7f + +// ------------------------------------------------------------------------ +// DDC Starting Phase + +#define FR_RX_PHASE_0 44 +#define FR_RX_PHASE_1 45 +#define FR_RX_PHASE_2 46 +#define FR_RX_PHASE_3 47 + +// ------------------------------------------------------------------------ +// Tx data format control register +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-------------------------------------------------------+-------+ +// | Reserved (Must be zero) | FMT | +// +-------------------------------------------------------+-------+ +// +// FMT values: + +#define FR_TX_FORMAT 48 +# define bmFR_TX_FORMAT_16_IQ 0 // 16-bit I, 16-bit Q + +// ------------------------------------------------------------------------ +// Rx data format control register +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------------------------+-+-+---------+-------+ +// | Reserved (Must be zero) |B|Q| WIDTH | SHIFT | +// +-----------------------------------------+-+-+---------+-------+ +// +// FMT values: + +#define FR_RX_FORMAT 49 + +# define bmFR_RX_FORMAT_SHIFT_MASK (0x0f << 0) // arithmetic right shift [0, 15] +# define bmFR_RX_FORMAT_SHIFT_SHIFT 0 +# define bmFR_RX_FORMAT_WIDTH_MASK (0x1f << 4) // data width in bits [1, 16] (not all valid) +# define bmFR_RX_FORMAT_WIDTH_SHIFT 4 +# define bmFR_RX_FORMAT_WANT_Q (0x1 << 9) // deliver both I & Q, else just I +# define bmFR_RX_FORMAT_BYPASS_HB (0x1 << 10) // bypass half-band filter + +// The valid combinations currently are: +// +// B Q WIDTH SHIFT +// 0 1 16 0 +// 0 1 8 8 + + +// Possible future values of WIDTH = {4, 2, 1} +// 12 takes a bit more work, since we need to know packet alignment. + +// ------------------------------------------------------------------------ +// FIXME register numbers 50 to 63 are available + +// ------------------------------------------------------------------------ +// Registers 64 to 95 are reserved for user custom FPGA builds. +// The standard USRP software will not touch these. + +#define FR_USER_0 64 +#define FR_USER_1 65 +#define FR_USER_2 66 +#define FR_USER_3 67 +#define FR_USER_4 68 +#define FR_USER_5 69 +#define FR_USER_6 70 +#define FR_USER_7 71 +#define FR_USER_8 72 +#define FR_USER_9 73 +#define FR_USER_10 74 +#define FR_USER_11 75 +#define FR_USER_12 76 +#define FR_USER_13 77 +#define FR_USER_14 78 +#define FR_USER_15 79 +#define FR_USER_16 80 +#define FR_USER_17 81 +#define FR_USER_18 82 +#define FR_USER_19 83 +#define FR_USER_20 84 +#define FR_USER_21 85 +#define FR_USER_22 86 +#define FR_USER_23 87 +#define FR_USER_24 88 +#define FR_USER_25 89 +#define FR_USER_26 90 +#define FR_USER_27 91 +#define FR_USER_28 92 +#define FR_USER_29 93 +#define FR_USER_30 94 +#define FR_USER_31 95 + +//Registers needed for multi usrp master/slave configuration +// +//Rx Master/slave control register (FR_RX_MASTER_SLAVE = FR_USER_0) +// +#define FR_RX_MASTER_SLAVE 64 +#define bitnoFR_RX_SYNC 0 +#define bitnoFR_RX_SYNC_MASTER 1 +#define bitnoFR_RX_SYNC_SLAVE 2 +# define bmFR_RX_SYNC (1 <<bitnoFR_RX_SYNC) //1 If this is a master "sync now" and send sync to slave. + // If this is a slave "sync now" (testing purpose only) + // Sync is allmost the same as reset (clear all counters and buffers) + // except that the io outputs and settings don't get reset (otherwise it couldn't send the sync to the slave) + //0 Normal operation + +# define bmFR_RX_SYNC_MASTER (1 <<bitnoFR_RX_SYNC_MASTER) //1 This is a rx sync master, output sync_rx on rx_a_io[15] + //0 This is not a rx sync master +# define bmFR_RX_SYNC_SLAVE (1 <<bitnoFR_RX_SYNC_SLAVE) //1 This is a rx sync slave, follow sync_rx on rx_a_io[bitnoFR_RX_SYNC_INPUT_IOPIN] + //0 This is not an rx sync slave. + +//Caution The master settings will output values on the io lines. +//They inheritely enable these lines as output. If you have a daughtercard which uses these lines also as output then you will burn your usrp and daughtercard. +//If you set the slave bits then your usrp won't do anything if you don't connect a master. +// Rx Master/slave control register +// +// The way this is supposed to be used is connecting a (short) 16pin flatcable from an rx daughterboard in RXA master io_rx[8..15] to slave io_rx[8..15] on RXA of slave usrp +// This can be done with basic_rx boards or dbsrx boards +//dbsrx: connect master-J25 to slave-J25 +//basic rx: connect J25 to slave-J25 +//CAUTION: pay attention to the lineup of your connector. +//The red line (pin1) should be at the same side of the daughterboards on master and slave. +//If you turnaround the cable on one end you will burn your usrp. + +//You cannot use a 16pin flatcable if you are using FLEX400 or FLEX2400 daughterboards, since these use a lot of the io pins. +//You can still link them but you must use only a 2pin or 1pin cable +//You can also use a 2-wire link. put a 2pin header on io[15],gnd of the master RXA daughterboard and connect it to io15,gnd of the slave RXA db. +//You can use a cable like the ones found with the leds on the mainbord of a PC. +//Make sure you don't twist the cable, otherwise you connect the sync output to ground. +//To be save you could also just use a single wire from master io[15] to slave io[15], but this is not optimal for signal integrity. + + +// Since rx_io[0] can normally be used as a refclk and is not exported on all daughterboards this line +// still has the refclk function if you use the master/slave setup (it is not touched by the master/slave settings). +// The master/slave circuitry will only use io pin 15 and does not touch any of the other io pins. +#define bitnoFR_RX_SYNC_INPUT_IOPIN 15 +#define bmFR_RX_SYNC_INPUT_IOPIN (1<<bitnoFR_RX_SYNC_INPUT_IOPIN) +//TODO the output pin is still hardcoded in the verilog code, make it listen to the following define +#define bitnoFR_RX_SYNC_OUTPUT_IOPIN 15 +#define bmFR_RX_SYNC_OUTPUT_IOPIN (1<<bitnoFR_RX_SYNC_OUTPUT_IOPIN) +// ======================================================================= +// READBACK Registers +// ======================================================================= + +#define FR_RB_IO_RX_A_IO_TX_A 1 // read back a-side i/o pins +#define FR_RB_IO_RX_B_IO_TX_B 2 // read back b-side i/o pins + +// ------------------------------------------------------------------------ +// FPGA Capability register +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------------------------------+-+-----+-+-----+ +// | Reserved (Must be zero) |T|NDUC |R|NDDC | +// +-----------------------------------------------+-+-----+-+-----+ +// +// Bottom 4-bits are Rx capabilities +// Next 4-bits are Tx capabilities + +#define FR_RB_CAPS 3 +# define bmFR_RB_CAPS_NDDC_MASK (0x7 << 0) // # of digital down converters 0,1,2,4 +# define bmFR_RB_CAPS_NDDC_SHIFT 0 +# define bmFR_RB_CAPS_RX_HAS_HALFBAND (0x1 << 3) +# define bmFR_RB_CAPS_NDUC_MASK (0x7 << 4) // # of digital up converters 0,1,2 +# define bmFR_RB_CAPS_NDUC_SHIFT 4 +# define bmFR_RB_CAPS_TX_HAS_HALFBAND (0x1 << 7) + + +#endif /* INCLUDED_FPGA_REGS_STANDARD_H */ diff --git a/firmware/fx2/common/fpga_regs_standard.v b/firmware/fx2/common/fpga_regs_standard.v new file mode 100644 index 000000000..d09aa6116 --- /dev/null +++ b/firmware/fx2/common/fpga_regs_standard.v @@ -0,0 +1,256 @@ +// +// This file is machine generated from ./fpga_regs_standard.h +// Do not edit by hand; your edits will be overwritten. +// + +// Register numbers 0 to 31 are reserved for use in fpga_regs_common.h. +// Registers 64 to 79 are available for custom FPGA builds. + + +// DDC / DUC + +`define FR_INTERP_RATE 7'd32 // [1,1024] +`define FR_DECIM_RATE 7'd33 // [1,256] + +// DDC center freq + +`define FR_RX_FREQ_0 7'd34 +`define FR_RX_FREQ_1 7'd35 +`define FR_RX_FREQ_2 7'd36 +`define FR_RX_FREQ_3 7'd37 + +// See below for DDC Starting Phase + +// ------------------------------------------------------------------------ +// configure FPGA Rx mux +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------+-------+-------+-------+-------+-+-----+ +// | must be zero | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH | +// +-----------------------+-------+-------+-------+-------+-+-----+ +// +// There are a maximum of 4 digital downconverters in the the FPGA. +// Each DDC has two 16-bit inputs, I and Q, and two 16-bit outputs, I & Q. +// +// DDC I inputs are specified by the two bit fields I3, I2, I1 & I0 +// +// 0 = DDC input is from ADC 0 +// 1 = DDC input is from ADC 1 +// 2 = DDC input is from ADC 2 +// 3 = DDC input is from ADC 3 +// +// If Z == 1, all DDC Q inputs are set to zero +// If Z == 0, DDC Q inputs are specified by the two bit fields Q3, Q2, Q1 & Q0 +// +// NCH specifies the number of complex channels that are sent across +// the USB. The legal values are 1, 2 or 4, corresponding to 2, 4 or +// 8 16-bit values. + +`define FR_RX_MUX 7'd38 + +// ------------------------------------------------------------------------ +// configure FPGA Tx Mux. +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------+-------+-------+-------+-------+-+-----+ +// | | DAC3 | DAC2 | DAC1 | DAC0 |0| NCH | +// +-----------------------------------------------+-------+-+-----+ +// +// NCH specifies the number of complex channels that are sent across +// the USB. The legal values are 1 or 2, corresponding to 2 or 4 +// 16-bit values. +// +// There are two interpolators with complex inputs and outputs. +// There are four DACs. (We use the DUC in each AD9862.) +// +// Each 4-bit DACx field specifies the source for the DAC and +// whether or not that DAC is enabled. Each subfield is coded +// like this: +// +// 3 2 1 0 +// +-+-----+ +// |E| N | +// +-+-----+ +// +// Where E is set if the DAC is enabled, and N specifies which +// interpolator output is connected to this DAC. +// +// N which interp output +// --- ------------------- +// 0 chan 0 I +// 1 chan 0 Q +// 2 chan 1 I +// 3 chan 1 Q + +`define FR_TX_MUX 7'd39 + +// ------------------------------------------------------------------------ +// REFCLK control +// +// Control whether a reference clock is sent to the daughterboards, +// and what frequency. The refclk is sent on d'board i/o pin 0. +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------------------------------+-+------------+ +// | Reserved (Must be zero) |E| DIVISOR | +// +-----------------------------------------------+-+------------+ + +// +// Bit 7 -- 1 turns on refclk, 0 allows IO use +// Bits 6:0 Divider value + +`define FR_TX_A_REFCLK 7'd40 +`define FR_RX_A_REFCLK 7'd41 +`define FR_TX_B_REFCLK 7'd42 +`define FR_RX_B_REFCLK 7'd43 + + +// ------------------------------------------------------------------------ +// DDC Starting Phase + +`define FR_RX_PHASE_0 7'd44 +`define FR_RX_PHASE_1 7'd45 +`define FR_RX_PHASE_2 7'd46 +`define FR_RX_PHASE_3 7'd47 + +// ------------------------------------------------------------------------ +// Tx data format control register +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-------------------------------------------------------+-------+ +// | Reserved (Must be zero) | FMT | +// +-------------------------------------------------------+-------+ +// +// FMT values: + +`define FR_TX_FORMAT 7'd48 + +// ------------------------------------------------------------------------ +// Rx data format control register +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------------------------+-+-+---------+-------+ +// | Reserved (Must be zero) |B|Q| WIDTH | SHIFT | +// +-----------------------------------------+-+-+---------+-------+ +// +// FMT values: + +`define FR_RX_FORMAT 7'd49 + + +// The valid combinations currently are: +// +// B Q WIDTH SHIFT +// 0 1 16 0 +// 0 1 8 8 + + +// Possible future values of WIDTH = {4, 2, 1} +// 12 takes a bit more work, since we need to know packet alignment. + +// ------------------------------------------------------------------------ +// FIXME register numbers 50 to 63 are available + +// ------------------------------------------------------------------------ +// Registers 64 to 95 are reserved for user custom FPGA builds. +// The standard USRP software will not touch these. + +`define FR_USER_0 7'd64 +`define FR_USER_1 7'd65 +`define FR_USER_2 7'd66 +`define FR_USER_3 7'd67 +`define FR_USER_4 7'd68 +`define FR_USER_5 7'd69 +`define FR_USER_6 7'd70 +`define FR_USER_7 7'd71 +`define FR_USER_8 7'd72 +`define FR_USER_9 7'd73 +`define FR_USER_10 7'd74 +`define FR_USER_11 7'd75 +`define FR_USER_12 7'd76 +`define FR_USER_13 7'd77 +`define FR_USER_14 7'd78 +`define FR_USER_15 7'd79 +`define FR_USER_16 7'd80 +`define FR_USER_17 7'd81 +`define FR_USER_18 7'd82 +`define FR_USER_19 7'd83 +`define FR_USER_20 7'd84 +`define FR_USER_21 7'd85 +`define FR_USER_22 7'd86 +`define FR_USER_23 7'd87 +`define FR_USER_24 7'd88 +`define FR_USER_25 7'd89 +`define FR_USER_26 7'd90 +`define FR_USER_27 7'd91 +`define FR_USER_28 7'd92 +`define FR_USER_29 7'd93 +`define FR_USER_30 7'd94 +`define FR_USER_31 7'd95 + +//Registers needed for multi usrp master/slave configuration +// +//Rx Master/slave control register (FR_RX_MASTER_SLAVE = FR_USER_0) +// +`define FR_RX_MASTER_SLAVE 7'd64 +`define bitnoFR_RX_SYNC 0 +`define bitnoFR_RX_SYNC_MASTER 1 +`define bitnoFR_RX_SYNC_SLAVE 2 + + +//Caution The master settings will output values on the io lines. +//They inheritely enable these lines as output. If you have a daughtercard which uses these lines also as output then you will burn your usrp and daughtercard. +//If you set the slave bits then your usrp won't do anything if you don't connect a master. +// Rx Master/slave control register +// +// The way this is supposed to be used is connecting a (short) 16pin flatcable from an rx daughterboard in RXA master io_rx[8..15] to slave io_rx[8..15] on RXA of slave usrp +// This can be done with basic_rx boards or dbsrx boards +//dbsrx: connect master-J25 to slave-J25 +//basic rx: connect J25 to slave-J25 +//CAUTION: pay attention to the lineup of your connector. +//The red line (pin1) should be at the same side of the daughterboards on master and slave. +//If you turnaround the cable on one end you will burn your usrp. + +//You cannot use a 16pin flatcable if you are using FLEX400 or FLEX2400 daughterboards, since these use a lot of the io pins. +//You can still link them but you must use only a 2pin or 1pin cable +//You can also use a 2-wire link. put a 2pin header on io[15],gnd of the master RXA daughterboard and connect it to io15,gnd of the slave RXA db. +//You can use a cable like the ones found with the leds on the mainbord of a PC. +//Make sure you don't twist the cable, otherwise you connect the sync output to ground. +//To be save you could also just use a single wire from master io[15] to slave io[15], but this is not optimal for signal integrity. + + +// Since rx_io[0] can normally be used as a refclk and is not exported on all daughterboards this line +// still has the refclk function if you use the master/slave setup (it is not touched by the master/slave settings). +// The master/slave circuitry will only use io pin 15 and does not touch any of the other io pins. +`define bitnoFR_RX_SYNC_INPUT_IOPIN 15 +`define bmFR_RX_SYNC_INPUT_IOPIN (1<<bitnoFR_RX_SYNC_INPUT_IOPIN) +//TODO the output pin is still hardcoded in the verilog code, make it listen to the following define +`define bitnoFR_RX_SYNC_OUTPUT_IOPIN 15 +`define bmFR_RX_SYNC_OUTPUT_IOPIN (1<<bitnoFR_RX_SYNC_OUTPUT_IOPIN) +// ======================================================================= +// READBACK Registers +// ======================================================================= + +`define FR_RB_IO_RX_A_IO_TX_A 7'd1 // read back a-side i/o pins +`define FR_RB_IO_RX_B_IO_TX_B 7'd2 // read back b-side i/o pins + +// ------------------------------------------------------------------------ +// FPGA Capability register +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------------------------------+-+-----+-+-----+ +// | Reserved (Must be zero) |T|NDUC |R|NDDC | +// +-----------------------------------------------+-+-----+-+-----+ +// +// Bottom 4-bits are Rx capabilities +// Next 4-bits are Tx capabilities + +`define FR_RB_CAPS 7'd3 + + diff --git a/firmware/fx2/common/fx2regs.h b/firmware/fx2/common/fx2regs.h new file mode 100644 index 000000000..acbc0b89e --- /dev/null +++ b/firmware/fx2/common/fx2regs.h @@ -0,0 +1,735 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +/* +//----------------------------------------------------------------------------- +// File: FX2regs.h +// Contents: EZ-USB FX2 register declarations and bit mask definitions. +// +// $Archive: /USB/Target/Inc/fx2regs.h $ +// $Date$ +// $Revision$ +// +// +// Copyright (c) 2000 Cypress Semiconductor, All rights reserved +//----------------------------------------------------------------------------- +*/ + + +#ifndef FX2REGS_H /* Header Sentry */ +#define FX2REGS_H + +#define ALLOCATE_EXTERN // required for "right thing to happen" with fx2regs.h + +/* +//----------------------------------------------------------------------------- +// FX2 Related Register Assignments +//----------------------------------------------------------------------------- + +// The Ez-USB FX2 registers are defined here. We use FX2regs.h for register +// address allocation by using "#define ALLOCATE_EXTERN". +// When using "#define ALLOCATE_EXTERN", you get (for instance): +// xdata volatile BYTE OUT7BUF[64] _at_ 0x7B40; +// Such lines are created from FX2.h by using the preprocessor. +// Incidently, these lines will not generate any space in the resulting hex +// file; they just bind the symbols to the addresses for compilation. +// You just need to put "#define ALLOCATE_EXTERN" in your main program file; +// i.e. fw.c or a stand-alone C source file. +// Without "#define ALLOCATE_EXTERN", you just get the external reference: +// extern xdata volatile BYTE OUT7BUF[64] ;// 0x7B40; +// This uses the concatenation operator "##" to insert a comment "//" +// to cut off the end of the line, "_at_ 0x7B40;", which is not wanted. +*/ + + +#ifdef ALLOCATE_EXTERN +#define EXTERN +#define _AT_(a) at a +#else +#define EXTERN extern +#define _AT_ ;/ ## / +#endif + +typedef unsigned char BYTE; +typedef unsigned short WORD; + +EXTERN xdata _AT_(0xE400) volatile BYTE GPIF_WAVE_DATA[128]; +EXTERN xdata _AT_(0xE480) volatile BYTE RES_WAVEDATA_END ; + +// General Configuration + +EXTERN xdata _AT_(0xE600) volatile BYTE CPUCS ; // Control & Status +EXTERN xdata _AT_(0xE601) volatile BYTE IFCONFIG ; // Interface Configuration +EXTERN xdata _AT_(0xE602) volatile BYTE PINFLAGSAB ; // FIFO FLAGA and FLAGB Assignments +EXTERN xdata _AT_(0xE603) volatile BYTE PINFLAGSCD ; // FIFO FLAGC and FLAGD Assignments +EXTERN xdata _AT_(0xE604) volatile BYTE FIFORESET ; // Restore FIFOS to default state +EXTERN xdata _AT_(0xE605) volatile BYTE BREAKPT ; // Breakpoint +EXTERN xdata _AT_(0xE606) volatile BYTE BPADDRH ; // Breakpoint Address H +EXTERN xdata _AT_(0xE607) volatile BYTE BPADDRL ; // Breakpoint Address L +EXTERN xdata _AT_(0xE608) volatile BYTE UART230 ; // 230 Kbaud clock for T0,T1,T2 +EXTERN xdata _AT_(0xE609) volatile BYTE FIFOPINPOLAR ; // FIFO polarities +EXTERN xdata _AT_(0xE60A) volatile BYTE REVID ; // Chip Revision +EXTERN xdata _AT_(0xE60B) volatile BYTE REVCTL ; // Chip Revision Control + +// Endpoint Configuration +EXTERN xdata _AT_(0xE610) volatile BYTE EP1OUTCFG ; // Endpoint 1-OUT Configuration +EXTERN xdata _AT_(0xE611) volatile BYTE EP1INCFG ; // Endpoint 1-IN Configuration +EXTERN xdata _AT_(0xE612) volatile BYTE EP2CFG ; // Endpoint 2 Configuration +EXTERN xdata _AT_(0xE613) volatile BYTE EP4CFG ; // Endpoint 4 Configuration +EXTERN xdata _AT_(0xE614) volatile BYTE EP6CFG ; // Endpoint 6 Configuration +EXTERN xdata _AT_(0xE615) volatile BYTE EP8CFG ; // Endpoint 8 Configuration +EXTERN xdata _AT_(0xE618) volatile BYTE EP2FIFOCFG ; // Endpoint 2 FIFO configuration +EXTERN xdata _AT_(0xE619) volatile BYTE EP4FIFOCFG ; // Endpoint 4 FIFO configuration +EXTERN xdata _AT_(0xE61A) volatile BYTE EP6FIFOCFG ; // Endpoint 6 FIFO configuration +EXTERN xdata _AT_(0xE61B) volatile BYTE EP8FIFOCFG ; // Endpoint 8 FIFO configuration +EXTERN xdata _AT_(0xE620) volatile BYTE EP2AUTOINLENH ; // Endpoint 2 Packet Length H (IN only) +EXTERN xdata _AT_(0xE621) volatile BYTE EP2AUTOINLENL ; // Endpoint 2 Packet Length L (IN only) +EXTERN xdata _AT_(0xE622) volatile BYTE EP4AUTOINLENH ; // Endpoint 4 Packet Length H (IN only) +EXTERN xdata _AT_(0xE623) volatile BYTE EP4AUTOINLENL ; // Endpoint 4 Packet Length L (IN only) +EXTERN xdata _AT_(0xE624) volatile BYTE EP6AUTOINLENH ; // Endpoint 6 Packet Length H (IN only) +EXTERN xdata _AT_(0xE625) volatile BYTE EP6AUTOINLENL ; // Endpoint 6 Packet Length L (IN only) +EXTERN xdata _AT_(0xE626) volatile BYTE EP8AUTOINLENH ; // Endpoint 8 Packet Length H (IN only) +EXTERN xdata _AT_(0xE627) volatile BYTE EP8AUTOINLENL ; // Endpoint 8 Packet Length L (IN only) +EXTERN xdata _AT_(0xE630) volatile BYTE EP2FIFOPFH ; // EP2 Programmable Flag trigger H +EXTERN xdata _AT_(0xE631) volatile BYTE EP2FIFOPFL ; // EP2 Programmable Flag trigger L +EXTERN xdata _AT_(0xE632) volatile BYTE EP4FIFOPFH ; // EP4 Programmable Flag trigger H +EXTERN xdata _AT_(0xE633) volatile BYTE EP4FIFOPFL ; // EP4 Programmable Flag trigger L +EXTERN xdata _AT_(0xE634) volatile BYTE EP6FIFOPFH ; // EP6 Programmable Flag trigger H +EXTERN xdata _AT_(0xE635) volatile BYTE EP6FIFOPFL ; // EP6 Programmable Flag trigger L +EXTERN xdata _AT_(0xE636) volatile BYTE EP8FIFOPFH ; // EP8 Programmable Flag trigger H +EXTERN xdata _AT_(0xE637) volatile BYTE EP8FIFOPFL ; // EP8 Programmable Flag trigger L +EXTERN xdata _AT_(0xE640) volatile BYTE EP2ISOINPKTS ; // EP2 (if ISO) IN Packets per frame (1-3) +EXTERN xdata _AT_(0xE641) volatile BYTE EP4ISOINPKTS ; // EP4 (if ISO) IN Packets per frame (1-3) +EXTERN xdata _AT_(0xE642) volatile BYTE EP6ISOINPKTS ; // EP6 (if ISO) IN Packets per frame (1-3) +EXTERN xdata _AT_(0xE643) volatile BYTE EP8ISOINPKTS ; // EP8 (if ISO) IN Packets per frame (1-3) +EXTERN xdata _AT_(0xE648) volatile BYTE INPKTEND ; // Force IN Packet End +EXTERN xdata _AT_(0xE649) volatile BYTE OUTPKTEND ; // Force OUT Packet End + +// Interrupts + +EXTERN xdata _AT_(0xE650) volatile BYTE EP2FIFOIE ; // Endpoint 2 Flag Interrupt Enable +EXTERN xdata _AT_(0xE651) volatile BYTE EP2FIFOIRQ ; // Endpoint 2 Flag Interrupt Request +EXTERN xdata _AT_(0xE652) volatile BYTE EP4FIFOIE ; // Endpoint 4 Flag Interrupt Enable +EXTERN xdata _AT_(0xE653) volatile BYTE EP4FIFOIRQ ; // Endpoint 4 Flag Interrupt Request +EXTERN xdata _AT_(0xE654) volatile BYTE EP6FIFOIE ; // Endpoint 6 Flag Interrupt Enable +EXTERN xdata _AT_(0xE655) volatile BYTE EP6FIFOIRQ ; // Endpoint 6 Flag Interrupt Request +EXTERN xdata _AT_(0xE656) volatile BYTE EP8FIFOIE ; // Endpoint 8 Flag Interrupt Enable +EXTERN xdata _AT_(0xE657) volatile BYTE EP8FIFOIRQ ; // Endpoint 8 Flag Interrupt Request +EXTERN xdata _AT_(0xE658) volatile BYTE IBNIE ; // IN-BULK-NAK Interrupt Enable +EXTERN xdata _AT_(0xE659) volatile BYTE IBNIRQ ; // IN-BULK-NAK interrupt Request +EXTERN xdata _AT_(0xE65A) volatile BYTE NAKIE ; // Endpoint Ping NAK interrupt Enable +EXTERN xdata _AT_(0xE65B) volatile BYTE NAKIRQ ; // Endpoint Ping NAK interrupt Request +EXTERN xdata _AT_(0xE65C) volatile BYTE USBIE ; // USB Int Enables +EXTERN xdata _AT_(0xE65D) volatile BYTE USBIRQ ; // USB Interrupt Requests +EXTERN xdata _AT_(0xE65E) volatile BYTE EPIE ; // Endpoint Interrupt Enables +EXTERN xdata _AT_(0xE65F) volatile BYTE EPIRQ ; // Endpoint Interrupt Requests +EXTERN xdata _AT_(0xE660) volatile BYTE GPIFIE ; // GPIF Interrupt Enable +EXTERN xdata _AT_(0xE661) volatile BYTE GPIFIRQ ; // GPIF Interrupt Request +EXTERN xdata _AT_(0xE662) volatile BYTE USBERRIE ; // USB Error Interrupt Enables +EXTERN xdata _AT_(0xE663) volatile BYTE USBERRIRQ ; // USB Error Interrupt Requests +EXTERN xdata _AT_(0xE664) volatile BYTE ERRCNTLIM ; // USB Error counter and limit +EXTERN xdata _AT_(0xE665) volatile BYTE CLRERRCNT ; // Clear Error Counter EC[3..0] +EXTERN xdata _AT_(0xE666) volatile BYTE INT2IVEC ; // Interupt 2 (USB) Autovector +EXTERN xdata _AT_(0xE667) volatile BYTE INT4IVEC ; // Interupt 4 (FIFOS & GPIF) Autovector +EXTERN xdata _AT_(0xE668) volatile BYTE INTSETUP ; // Interrupt 2&4 Setup + +// Input/Output + +EXTERN xdata _AT_(0xE670) volatile BYTE PORTACFG ; // I/O PORTA Alternate Configuration +EXTERN xdata _AT_(0xE671) volatile BYTE PORTCCFG ; // I/O PORTC Alternate Configuration +EXTERN xdata _AT_(0xE672) volatile BYTE PORTECFG ; // I/O PORTE Alternate Configuration +EXTERN xdata _AT_(0xE678) volatile BYTE I2CS ; // Control & Status +EXTERN xdata _AT_(0xE679) volatile BYTE I2DAT ; // Data +EXTERN xdata _AT_(0xE67A) volatile BYTE I2CTL ; // I2C Control +EXTERN xdata _AT_(0xE67B) volatile BYTE XAUTODAT1 ; // Autoptr1 MOVX access +EXTERN xdata _AT_(0xE67C) volatile BYTE XAUTODAT2 ; // Autoptr2 MOVX access + +#define EXTAUTODAT1 XAUTODAT1 +#define EXTAUTODAT2 XAUTODAT2 + +// USB Control + +EXTERN xdata _AT_(0xE680) volatile BYTE USBCS ; // USB Control & Status +EXTERN xdata _AT_(0xE681) volatile BYTE SUSPEND ; // Put chip into suspend +EXTERN xdata _AT_(0xE682) volatile BYTE WAKEUPCS ; // Wakeup source and polarity +EXTERN xdata _AT_(0xE683) volatile BYTE TOGCTL ; // Toggle Control +EXTERN xdata _AT_(0xE684) volatile BYTE USBFRAMEH ; // USB Frame count H +EXTERN xdata _AT_(0xE685) volatile BYTE USBFRAMEL ; // USB Frame count L +EXTERN xdata _AT_(0xE686) volatile BYTE MICROFRAME ; // Microframe count, 0-7 +EXTERN xdata _AT_(0xE687) volatile BYTE FNADDR ; // USB Function address + +// Endpoints + +EXTERN xdata _AT_(0xE68A) volatile BYTE EP0BCH ; // Endpoint 0 Byte Count H +EXTERN xdata _AT_(0xE68B) volatile BYTE EP0BCL ; // Endpoint 0 Byte Count L +EXTERN xdata _AT_(0xE68D) volatile BYTE EP1OUTBC ; // Endpoint 1 OUT Byte Count +EXTERN xdata _AT_(0xE68F) volatile BYTE EP1INBC ; // Endpoint 1 IN Byte Count +EXTERN xdata _AT_(0xE690) volatile BYTE EP2BCH ; // Endpoint 2 Byte Count H +EXTERN xdata _AT_(0xE691) volatile BYTE EP2BCL ; // Endpoint 2 Byte Count L +EXTERN xdata _AT_(0xE694) volatile BYTE EP4BCH ; // Endpoint 4 Byte Count H +EXTERN xdata _AT_(0xE695) volatile BYTE EP4BCL ; // Endpoint 4 Byte Count L +EXTERN xdata _AT_(0xE698) volatile BYTE EP6BCH ; // Endpoint 6 Byte Count H +EXTERN xdata _AT_(0xE699) volatile BYTE EP6BCL ; // Endpoint 6 Byte Count L +EXTERN xdata _AT_(0xE69C) volatile BYTE EP8BCH ; // Endpoint 8 Byte Count H +EXTERN xdata _AT_(0xE69D) volatile BYTE EP8BCL ; // Endpoint 8 Byte Count L +EXTERN xdata _AT_(0xE6A0) volatile BYTE EP0CS ; // Endpoint Control and Status +EXTERN xdata _AT_(0xE6A1) volatile BYTE EP1OUTCS ; // Endpoint 1 OUT Control and Status +EXTERN xdata _AT_(0xE6A2) volatile BYTE EP1INCS ; // Endpoint 1 IN Control and Status +EXTERN xdata _AT_(0xE6A3) volatile BYTE EP2CS ; // Endpoint 2 Control and Status +EXTERN xdata _AT_(0xE6A4) volatile BYTE EP4CS ; // Endpoint 4 Control and Status +EXTERN xdata _AT_(0xE6A5) volatile BYTE EP6CS ; // Endpoint 6 Control and Status +EXTERN xdata _AT_(0xE6A6) volatile BYTE EP8CS ; // Endpoint 8 Control and Status +EXTERN xdata _AT_(0xE6A7) volatile BYTE EP2FIFOFLGS ; // Endpoint 2 Flags +EXTERN xdata _AT_(0xE6A8) volatile BYTE EP4FIFOFLGS ; // Endpoint 4 Flags +EXTERN xdata _AT_(0xE6A9) volatile BYTE EP6FIFOFLGS ; // Endpoint 6 Flags +EXTERN xdata _AT_(0xE6AA) volatile BYTE EP8FIFOFLGS ; // Endpoint 8 Flags +EXTERN xdata _AT_(0xE6AB) volatile BYTE EP2FIFOBCH ; // EP2 FIFO total byte count H +EXTERN xdata _AT_(0xE6AC) volatile BYTE EP2FIFOBCL ; // EP2 FIFO total byte count L +EXTERN xdata _AT_(0xE6AD) volatile BYTE EP4FIFOBCH ; // EP4 FIFO total byte count H +EXTERN xdata _AT_(0xE6AE) volatile BYTE EP4FIFOBCL ; // EP4 FIFO total byte count L +EXTERN xdata _AT_(0xE6AF) volatile BYTE EP6FIFOBCH ; // EP6 FIFO total byte count H +EXTERN xdata _AT_(0xE6B0) volatile BYTE EP6FIFOBCL ; // EP6 FIFO total byte count L +EXTERN xdata _AT_(0xE6B1) volatile BYTE EP8FIFOBCH ; // EP8 FIFO total byte count H +EXTERN xdata _AT_(0xE6B2) volatile BYTE EP8FIFOBCL ; // EP8 FIFO total byte count L +EXTERN xdata _AT_(0xE6B3) volatile BYTE SUDPTRH ; // Setup Data Pointer high address byte +EXTERN xdata _AT_(0xE6B4) volatile BYTE SUDPTRL ; // Setup Data Pointer low address byte +EXTERN xdata _AT_(0xE6B5) volatile BYTE SUDPTRCTL ; // Setup Data Pointer Auto Mode +EXTERN xdata _AT_(0xE6B8) volatile BYTE SETUPDAT[8] ; // 8 bytes of SETUP data + +// GPIF + +EXTERN xdata _AT_(0xE6C0) volatile BYTE GPIFWFSELECT ; // Waveform Selector +EXTERN xdata _AT_(0xE6C1) volatile BYTE GPIFIDLECS ; // GPIF Done, GPIF IDLE drive mode +EXTERN xdata _AT_(0xE6C2) volatile BYTE GPIFIDLECTL ; // Inactive Bus, CTL states +EXTERN xdata _AT_(0xE6C3) volatile BYTE GPIFCTLCFG ; // CTL OUT pin drive +EXTERN xdata _AT_(0xE6C4) volatile BYTE GPIFADRH ; // GPIF Address H +EXTERN xdata _AT_(0xE6C5) volatile BYTE GPIFADRL ; // GPIF Address L + +EXTERN xdata _AT_(0xE6CE) volatile BYTE GPIFTCB3 ; // GPIF Transaction Count Byte 3 +EXTERN xdata _AT_(0xE6CF) volatile BYTE GPIFTCB2 ; // GPIF Transaction Count Byte 2 +EXTERN xdata _AT_(0xE6D0) volatile BYTE GPIFTCB1 ; // GPIF Transaction Count Byte 1 +EXTERN xdata _AT_(0xE6D1) volatile BYTE GPIFTCB0 ; // GPIF Transaction Count Byte 0 + +#define EP2GPIFTCH GPIFTCB1 // these are here for backwards compatibility +#define EP2GPIFTCL GPIFTCB0 // before REVE silicon (ie. REVB and REVD) +#define EP4GPIFTCH GPIFTCB1 // these are here for backwards compatibility +#define EP4GPIFTCL GPIFTCB0 // before REVE silicon (ie. REVB and REVD) +#define EP6GPIFTCH GPIFTCB1 // these are here for backwards compatibility +#define EP6GPIFTCL GPIFTCB0 // before REVE silicon (ie. REVB and REVD) +#define EP8GPIFTCH GPIFTCB1 // these are here for backwards compatibility +#define EP8GPIFTCL GPIFTCB0 // before REVE silicon (ie. REVB and REVD) + +// EXTERN xdata volatile BYTE EP2GPIFTCH _AT_ 0xE6D0; // EP2 GPIF Transaction Count High +// EXTERN xdata volatile BYTE EP2GPIFTCL _AT_ 0xE6D1; // EP2 GPIF Transaction Count Low +EXTERN xdata _AT_(0xE6D2) volatile BYTE EP2GPIFFLGSEL ; // EP2 GPIF Flag select +EXTERN xdata _AT_(0xE6D3) volatile BYTE EP2GPIFPFSTOP ; // Stop GPIF EP2 transaction on prog. flag +EXTERN xdata _AT_(0xE6D4) volatile BYTE EP2GPIFTRIG ; // EP2 FIFO Trigger +// EXTERN xdata volatile BYTE EP4GPIFTCH _AT_ 0xE6D8; // EP4 GPIF Transaction Count High +// EXTERN xdata volatile BYTE EP4GPIFTCL _AT_ 0xE6D9; // EP4 GPIF Transactionr Count Low +EXTERN xdata _AT_(0xE6DA) volatile BYTE EP4GPIFFLGSEL ; // EP4 GPIF Flag select +EXTERN xdata _AT_(0xE6DB) volatile BYTE EP4GPIFPFSTOP ; // Stop GPIF EP4 transaction on prog. flag +EXTERN xdata _AT_(0xE6DC) volatile BYTE EP4GPIFTRIG ; // EP4 FIFO Trigger +// EXTERN xdata volatile BYTE EP6GPIFTCH _AT_ 0xE6E0; // EP6 GPIF Transaction Count High +// EXTERN xdata volatile BYTE EP6GPIFTCL _AT_ 0xE6E1; // EP6 GPIF Transaction Count Low +EXTERN xdata _AT_(0xE6E2) volatile BYTE EP6GPIFFLGSEL ; // EP6 GPIF Flag select +EXTERN xdata _AT_(0xE6E3) volatile BYTE EP6GPIFPFSTOP ; // Stop GPIF EP6 transaction on prog. flag +EXTERN xdata _AT_(0xE6E4) volatile BYTE EP6GPIFTRIG ; // EP6 FIFO Trigger +// EXTERN xdata volatile BYTE EP8GPIFTCH _AT_ 0xE6E8; // EP8 GPIF Transaction Count High +// EXTERN xdata volatile BYTE EP8GPIFTCL _AT_ 0xE6E9; // EP8GPIF Transaction Count Low +EXTERN xdata _AT_(0xE6EA) volatile BYTE EP8GPIFFLGSEL ; // EP8 GPIF Flag select +EXTERN xdata _AT_(0xE6EB) volatile BYTE EP8GPIFPFSTOP ; // Stop GPIF EP8 transaction on prog. flag +EXTERN xdata _AT_(0xE6EC) volatile BYTE EP8GPIFTRIG ; // EP8 FIFO Trigger +EXTERN xdata _AT_(0xE6F0) volatile BYTE XGPIFSGLDATH ; // GPIF Data H (16-bit mode only) +EXTERN xdata _AT_(0xE6F1) volatile BYTE XGPIFSGLDATLX ; // Read/Write GPIF Data L & trigger transac +EXTERN xdata _AT_(0xE6F2) volatile BYTE XGPIFSGLDATLNOX ; // Read GPIF Data L, no transac trigger +EXTERN xdata _AT_(0xE6F3) volatile BYTE GPIFREADYCFG ; // Internal RDY,Sync/Async, RDY5CFG +EXTERN xdata _AT_(0xE6F4) volatile BYTE GPIFREADYSTAT ; // RDY pin states +EXTERN xdata _AT_(0xE6F5) volatile BYTE GPIFABORT ; // Abort GPIF cycles + +// UDMA + +EXTERN xdata _AT_(0xE6C6) volatile BYTE FLOWSTATE ; //Defines GPIF flow state +EXTERN xdata _AT_(0xE6C7) volatile BYTE FLOWLOGIC ; //Defines flow/hold decision criteria +EXTERN xdata _AT_(0xE6C8) volatile BYTE FLOWEQ0CTL ; //CTL states during active flow state +EXTERN xdata _AT_(0xE6C9) volatile BYTE FLOWEQ1CTL ; //CTL states during hold flow state +EXTERN xdata _AT_(0xE6CA) volatile BYTE FLOWHOLDOFF ; +EXTERN xdata _AT_(0xE6CB) volatile BYTE FLOWSTB ; //CTL/RDY Signal to use as master data strobe +EXTERN xdata _AT_(0xE6CC) volatile BYTE FLOWSTBEDGE ; //Defines active master strobe edge +EXTERN xdata _AT_(0xE6CD) volatile BYTE FLOWSTBHPERIOD ; //Half Period of output master strobe +EXTERN xdata _AT_(0xE60C) volatile BYTE GPIFHOLDAMOUNT ; //Data delay shift +EXTERN xdata _AT_(0xE67D) volatile BYTE UDMACRCH ; //CRC Upper byte +EXTERN xdata _AT_(0xE67E) volatile BYTE UDMACRCL ; //CRC Lower byte +EXTERN xdata _AT_(0xE67F) volatile BYTE UDMACRCQUAL ; //UDMA In only, host terminated use only + + +// Debug/Test + +EXTERN xdata _AT_(0xE6F8) volatile BYTE DBUG ; // Debug +EXTERN xdata _AT_(0xE6F9) volatile BYTE TESTCFG ; // Test configuration +EXTERN xdata _AT_(0xE6FA) volatile BYTE USBTEST ; // USB Test Modes +EXTERN xdata _AT_(0xE6FB) volatile BYTE CT1 ; // Chirp Test--Override +EXTERN xdata _AT_(0xE6FC) volatile BYTE CT2 ; // Chirp Test--FSM +EXTERN xdata _AT_(0xE6FD) volatile BYTE CT3 ; // Chirp Test--Control Signals +EXTERN xdata _AT_(0xE6FE) volatile BYTE CT4 ; // Chirp Test--Inputs + +// Endpoint Buffers + +EXTERN xdata _AT_(0xE740) volatile BYTE EP0BUF[64] ; // EP0 IN-OUT buffer +EXTERN xdata _AT_(0xE780) volatile BYTE EP1OUTBUF[64] ; // EP1-OUT buffer +EXTERN xdata _AT_(0xE7C0) volatile BYTE EP1INBUF[64] ; // EP1-IN buffer +EXTERN xdata _AT_(0xF000) volatile BYTE EP2FIFOBUF[1024] ; // 512/1024-byte EP2 buffer (IN or OUT) +EXTERN xdata _AT_(0xF400) volatile BYTE EP4FIFOBUF[1024] ; // 512 byte EP4 buffer (IN or OUT) +EXTERN xdata _AT_(0xF800) volatile BYTE EP6FIFOBUF[1024] ; // 512/1024-byte EP6 buffer (IN or OUT) +EXTERN xdata _AT_(0xFC00) volatile BYTE EP8FIFOBUF[1024] ; // 512 byte EP8 buffer (IN or OUT) + +#undef EXTERN +#undef _AT_ + +/*----------------------------------------------------------------------------- + Special Function Registers (SFRs) + The byte registers and bits defined in the following list are based + on the Synopsis definition of the 8051 Special Function Registers for EZ-USB. + If you modify the register definitions below, please regenerate the file + "ezregs.inc" which includes the same basic information for assembly inclusion. +-----------------------------------------------------------------------------*/ + +sfr at 0x80 IOA; +sfr at 0x81 SP; +sfr at 0x82 DPL; +sfr at 0x83 DPH; +sfr at 0x84 DPL1; +sfr at 0x85 DPH1; +sfr at 0x86 DPS; + /* DPS */ + sbit at 0x86+0 SEL; +sfr at 0x87 PCON; /* PCON */ + //sbit IDLE = 0x87+0; + //sbit STOP = 0x87+1; + //sbit GF0 = 0x87+2; + //sbit GF1 = 0x87+3; + //sbit SMOD0 = 0x87+7; +sfr at 0x88 TCON; + /* TCON */ + sbit at 0x88+0 IT0; + sbit at 0x88+1 IE0; + sbit at 0x88+2 IT1; + sbit at 0x88+3 IE1; + sbit at 0x88+4 TR0; + sbit at 0x88+5 TF0; + sbit at 0x88+6 TR1; + sbit at 0x88+7 TF1; +sfr at 0x89 TMOD; + /* TMOD */ + //sbit M00 = 0x89+0; + //sbit M10 = 0x89+1; + //sbit CT0 = 0x89+2; + //sbit GATE0 = 0x89+3; + //sbit M01 = 0x89+4; + //sbit M11 = 0x89+5; + //sbit CT1 = 0x89+6; + //sbit GATE1 = 0x89+7; +sfr at 0x8A TL0; +sfr at 0x8B TL1; +sfr at 0x8C TH0; +sfr at 0x8D TH1; +sfr at 0x8E CKCON; + /* CKCON */ + //sbit MD0 = 0x89+0; + //sbit MD1 = 0x89+1; + //sbit MD2 = 0x89+2; + //sbit T0M = 0x89+3; + //sbit T1M = 0x89+4; + //sbit T2M = 0x89+5; +// sfr at 0x8F SPC_FNC; // Was WRS in Reg320 + /* CKCON */ + //sbit WRS = 0x8F+0; +sfr at 0x90 IOB; +sfr at 0x91 EXIF; // EXIF Bit Values differ from Reg320 + /* EXIF */ + //sbit USBINT = 0x91+4; + //sbit I2CINT = 0x91+5; + //sbit IE4 = 0x91+6; + //sbit IE5 = 0x91+7; +sfr at 0x92 MPAGE; +sfr at 0x98 SCON0; + /* SCON0 */ + sbit at 0x98+0 RI; + sbit at 0x98+1 TI; + sbit at 0x98+2 RB8; + sbit at 0x98+3 TB8; + sbit at 0x98+4 REN; + sbit at 0x98+5 SM2; + sbit at 0x98+6 SM1; + sbit at 0x98+7 SM0; +sfr at 0x99 SBUF0; + +sfr at 0x9A APTR1H; +sfr at 0x9B APTR1L; +sfr at 0x9C AUTODAT1; +sfr at 0x9D AUTOPTRH2; +sfr at 0x9E AUTOPTRL2; +sfr at 0x9F AUTODAT2; +sfr at 0xA0 IOC; +sfr at 0xA1 INT2CLR; +sfr at 0xA2 INT4CLR; + +#define AUTOPTRH1 APTR1H +#define AUTOPTRL1 APTR1L + +sfr at 0xA8 IE; + /* IE */ + sbit at 0xA8+0 EX0; + sbit at 0xA8+1 ET0; + sbit at 0xA8+2 EX1; + sbit at 0xA8+3 ET1; + sbit at 0xA8+4 ES0; + sbit at 0xA8+5 ET2; + sbit at 0xA8+6 ES1; + sbit at 0xA8+7 EA; + +sfr at 0xAA EP2468STAT; + /* EP2468STAT */ + //sbit EP2E = 0xAA+0; + //sbit EP2F = 0xAA+1; + //sbit EP4E = 0xAA+2; + //sbit EP4F = 0xAA+3; + //sbit EP6E = 0xAA+4; + //sbit EP6F = 0xAA+5; + //sbit EP8E = 0xAA+6; + //sbit EP8F = 0xAA+7; + +sfr at 0xAB EP24FIFOFLGS; +sfr at 0xAC EP68FIFOFLGS; +sfr at 0xAF AUTOPTRSETUP; + /* AUTOPTRSETUP */ + // sbit EXTACC = 0xAF+0; + // sbit APTR1FZ = 0xAF+1; + // sbit APTR2FZ = 0xAF+2; + +sfr at 0xB0 IOD; +sfr at 0xB1 IOE; +sfr at 0xB2 OEA; +sfr at 0xB3 OEB; +sfr at 0xB4 OEC; +sfr at 0xB5 OED; +sfr at 0xB6 OEE; + +sfr at 0xB8 IP; + /* IP */ + sbit at 0xB8+0 PX0; + sbit at 0xB8+1 PT0; + sbit at 0xB8+2 PX1; + sbit at 0xB8+3 PT1; + sbit at 0xB8+4 PS0; + sbit at 0xB8+5 PT2; + sbit at 0xB8+6 PS1; + +sfr at 0xBA EP01STAT; +sfr at 0xBB GPIFTRIG; + +sfr at 0xBD GPIFSGLDATH; +sfr at 0xBE GPIFSGLDATLX; +sfr at 0xBF GPIFSGLDATLNOX; + +sfr at 0xC0 SCON1; + /* SCON1 */ + sbit at 0xC0+0 RI1; + sbit at 0xC0+1 TI1; + sbit at 0xC0+2 RB81; + sbit at 0xC0+3 TB81; + sbit at 0xC0+4 REN1; + sbit at 0xC0+5 SM21; + sbit at 0xC0+6 SM11; + sbit at 0xC0+7 SM01; +sfr at 0xC1 SBUF1; +sfr at 0xC8 T2CON; + /* T2CON */ + sbit at 0xC8+0 CP_RL2; + sbit at 0xC8+1 C_T2; + sbit at 0xC8+2 TR2; + sbit at 0xC8+3 EXEN2; + sbit at 0xC8+4 TCLK; + sbit at 0xC8+5 RCLK; + sbit at 0xC8+6 EXF2; + sbit at 0xC8+7 TF2; +sfr at 0xCA RCAP2L; +sfr at 0xCB RCAP2H; +sfr at 0xCC TL2; +sfr at 0xCD TH2; +sfr at 0xD0 PSW; + /* PSW */ + sbit at 0xD0+0 P; + sbit at 0xD0+1 FL; + sbit at 0xD0+2 OV; + sbit at 0xD0+3 RS0; + sbit at 0xD0+4 RS1; + sbit at 0xD0+5 F0; + sbit at 0xD0+6 AC; + sbit at 0xD0+7 CY; +sfr at 0xD8 EICON; // Was WDCON in DS80C320 EICON; Bit Values differ from Reg320 + /* EICON */ + sbit at 0xD8+3 INT6; + sbit at 0xD8+4 RESI; + sbit at 0xD8+5 ERESI; + sbit at 0xD8+7 SMOD1; +sfr at 0xE0 ACC; +sfr at 0xE8 EIE; // EIE Bit Values differ from Reg320 + /* EIE */ + sbit at 0xE8+0 EIUSB; + sbit at 0xE8+1 EI2C; + sbit at 0xE8+2 EIEX4; + sbit at 0xE8+3 EIEX5; + sbit at 0xE8+4 EIEX6; +sfr at 0xF0 B; +sfr at 0xF8 EIP; // EIP Bit Values differ from Reg320 + /* EIP */ + sbit at 0xF8+0 PUSB; + sbit at 0xF8+1 PI2C; + sbit at 0xF8+2 EIPX4; + sbit at 0xF8+3 EIPX5; + sbit at 0xF8+4 EIPX6; + +/*----------------------------------------------------------------------------- + Bit Masks +-----------------------------------------------------------------------------*/ + +#define bmBIT0 1 +#define bmBIT1 2 +#define bmBIT2 4 +#define bmBIT3 8 +#define bmBIT4 16 +#define bmBIT5 32 +#define bmBIT6 64 +#define bmBIT7 128 + +/* CPU Control & Status Register (CPUCS) */ +#define bmPRTCSTB bmBIT5 +#define bmCLKSPD (bmBIT4 | bmBIT3) +#define bmCLKSPD1 bmBIT4 +#define bmCLKSPD0 bmBIT3 +#define bmCLKINV bmBIT2 +#define bmCLKOE bmBIT1 +#define bm8051RES bmBIT0 +/* Port Alternate Configuration Registers */ +/* Port A (PORTACFG) */ +#define bmFLAGD bmBIT7 +#define bmINT1 bmBIT1 +#define bmINT0 bmBIT0 +/* Port C (PORTCCFG) */ +#define bmGPIFA7 bmBIT7 +#define bmGPIFA6 bmBIT6 +#define bmGPIFA5 bmBIT5 +#define bmGPIFA4 bmBIT4 +#define bmGPIFA3 bmBIT3 +#define bmGPIFA2 bmBIT2 +#define bmGPIFA1 bmBIT1 +#define bmGPIFA0 bmBIT0 +/* Port E (PORTECFG) */ +#define bmGPIFA8 bmBIT7 +#define bmT2EX bmBIT6 +#define bmINT6 bmBIT5 +#define bmRXD1OUT bmBIT4 +#define bmRXD0OUT bmBIT3 +#define bmT2OUT bmBIT2 +#define bmT1OUT bmBIT1 +#define bmT0OUT bmBIT0 + +/* I2C Control & Status Register (I2CS) */ +#define bmSTART bmBIT7 +#define bmSTOP bmBIT6 +#define bmLASTRD bmBIT5 +#define bmID (bmBIT4 | bmBIT3) +#define bmBERR bmBIT2 +#define bmACK bmBIT1 +#define bmDONE bmBIT0 +/* I2C Control Register (I2CTL) */ +#define bmSTOPIE bmBIT1 +#define bm400KHZ bmBIT0 +/* Interrupt 2 (USB) Autovector Register (INT2IVEC) */ +#define bmIV4 bmBIT6 +#define bmIV3 bmBIT5 +#define bmIV2 bmBIT4 +#define bmIV1 bmBIT3 +#define bmIV0 bmBIT2 +/* USB Interrupt Request & Enable Registers (USBIE/USBIRQ) */ +#define bmEP0ACK bmBIT6 +#define bmHSGRANT bmBIT5 +#define bmURES bmBIT4 +#define bmSUSP bmBIT3 +#define bmSUTOK bmBIT2 +#define bmSOF bmBIT1 +#define bmSUDAV bmBIT0 +/* Breakpoint register (BREAKPT) */ +#define bmBREAK bmBIT3 +#define bmBPPULSE bmBIT2 +#define bmBPEN bmBIT1 +/* Interrupt 2 & 4 Setup (INTSETUP) */ +#define bmAV2EN bmBIT3 +#define bmINT4IN bmBIT1 +#define bmAV4EN bmBIT0 +/* USB Control & Status Register (USBCS) */ +#define bmHSM bmBIT7 +#define bmDISCON bmBIT3 +#define bmNOSYNSOF bmBIT2 +#define bmRENUM bmBIT1 +#define bmSIGRESUME bmBIT0 +/* Wakeup Control and Status Register (WAKEUPCS) */ +#define bmWU2 bmBIT7 +#define bmWU bmBIT6 +#define bmWU2POL bmBIT5 +#define bmWUPOL bmBIT4 +#define bmDPEN bmBIT2 +#define bmWU2EN bmBIT1 +#define bmWUEN bmBIT0 +/* End Point 0 Control & Status Register (EP0CS) */ +#define bmHSNAK bmBIT7 +/* End Point 0-1 Control & Status Registers (EP0CS/EP1OUTCS/EP1INCS) */ +#define bmEPBUSY bmBIT1 +#define bmEPSTALL bmBIT0 +/* End Point 2-8 Control & Status Registers (EP2CS/EP4CS/EP6CS/EP8CS) */ +#define bmNPAK (bmBIT6 | bmBIT5 | bmBIT4) +#define bmEPFULL bmBIT3 +#define bmEPEMPTY bmBIT2 +/* Endpoint Status (EP2468STAT) SFR bits */ +#define bmEP8FULL bmBIT7 +#define bmEP8EMPTY bmBIT6 +#define bmEP6FULL bmBIT5 +#define bmEP6EMPTY bmBIT4 +#define bmEP4FULL bmBIT3 +#define bmEP4EMPTY bmBIT2 +#define bmEP2FULL bmBIT1 +#define bmEP2EMPTY bmBIT0 +/* SETUP Data Pointer Auto Mode (SUDPTRCTL) */ +#define bmSDPAUTO bmBIT0 +/* Endpoint Data Toggle Control (TOGCTL) */ +#define bmQUERYTOGGLE bmBIT7 +#define bmSETTOGGLE bmBIT6 +#define bmRESETTOGGLE bmBIT5 +#define bmTOGCTLEPMASK bmBIT3 | bmBIT2 | bmBIT1 | bmBIT0 +/* IBN (In Bulk Nak) enable and request bits (IBNIE/IBNIRQ) */ +#define bmEP8IBN bmBIT5 +#define bmEP6IBN bmBIT4 +#define bmEP4IBN bmBIT3 +#define bmEP2IBN bmBIT2 +#define bmEP1IBN bmBIT1 +#define bmEP0IBN bmBIT0 + +/* PING-NAK enable and request bits (NAKIE/NAKIRQ) */ +#define bmEP8PING bmBIT7 +#define bmEP6PING bmBIT6 +#define bmEP4PING bmBIT5 +#define bmEP2PING bmBIT4 +#define bmEP1PING bmBIT3 +#define bmEP0PING bmBIT2 +#define bmIBN bmBIT0 + +/* Interface Configuration bits (IFCONFIG) */ +#define bmIFCLKSRC bmBIT7 // set == INTERNAL +#define bm3048MHZ bmBIT6 // set == 48 MHz +#define bmIFCLKOE bmBIT5 +#define bmIFCLKPOL bmBIT4 +#define bmASYNC bmBIT3 +#define bmGSTATE bmBIT2 +#define bmIFCFG1 bmBIT1 +#define bmIFCFG0 bmBIT0 +#define bmIFCFGMASK (bmIFCFG0 | bmIFCFG1) +#define bmIFGPIF bmIFCFG1 +#define bmIFSLAVE (bmIFCFG0 | bmIFCFG1) + +/* Slave FIFO pin flags configuration bits (PINFLAGS) */ +#define bmINDEXED 0x0 //which fifo selected by FIFOADR +#define bmEP2PF 0x4 +#define bmEP4PF 0x5 +#define bmEP6PF 0x6 +#define bmEP8PF 0x7 +#define bmEP2EF 0x8 +#define bmEP4EF 0x9 +#define bmEP6EF 0xA +#define bmEP8EF 0xB +#define bmEP2FF 0xC +#define bmEP4FF 0xD +#define bmEP6FF 0xE +#define bmEP8FF 0xF + +/* EP 2468 FIFO Configuration bits (EP2FIFOCFG,EP4FIFOCFG,EP6FIFOCFG,EP8FIFOCFG) */ +#define bmINFM bmBIT6 +#define bmOEP bmBIT5 +#define bmAUTOOUT bmBIT4 +#define bmAUTOIN bmBIT3 +#define bmZEROLENIN bmBIT2 +// must be zero bmBIT1 +#define bmWORDWIDE bmBIT0 + +/* EP 24 FIFO Flag bits (EP24FIFOFLGS) */ +#define EP2FIFOEMPTY bmBIT1 +#define EP4FIFOEMPTY bmBIT5 + +/* + * Chip Revision Control Bits (REVCTL) - used to ebable/disable revision specific features + */ +#define bmNOAUTOARM bmBIT1 // these don't match the docs +#define bmSKIPCOMMIT bmBIT0 // these don't match the docs + +#define bmDYN_OUT bmBIT1 // these do... +#define bmENH_PKT bmBIT0 + + +/* Fifo Reset bits (FIFORESET) */ +#define bmNAKALL bmBIT7 + +/* Endpoint Configuration (EPxCFG) */ +#define bmVALID bmBIT7 +#define bmIN bmBIT6 +#define bmTYPE1 bmBIT5 +#define bmTYPE0 bmBIT4 +#define bmISOCHRONOUS bmTYPE0 +#define bmBULK bmTYPE1 +#define bmINTERRUPT (bmTYPE1 | bmTYPE0) +#define bm1KBUF bmBIT3 +#define bmBUF1 bmBIT1 +#define bmBUF0 bmBIT0 +#define bmQUADBUF 0 +#define bmINVALIDBUF bmBUF0 +#define bmDOUBLEBUF bmBUF1 +#define bmTRIPLEBUF (bmBUF1 | bmBUF0) + +/* OUTPKTEND */ +#define bmSKIP bmBIT7 // low 4 bits specify which end point + +/* GPIFTRIG defs */ +#define bmGPIF_IDLE bmBIT7 // status bit + +#define bmGPIF_EP2_START 0 +#define bmGPIF_EP4_START 1 +#define bmGPIF_EP6_START 2 +#define bmGPIF_EP8_START 3 +#define bmGPIF_READ bmBIT2 +#define bmGPIF_WRITE 0 + +/* EXIF bits */ +#define bmEXIF_USBINT bmBIT4 +#define bmEXIF_I2CINT bmBIT5 +#define bmEXIF_IE4 bmBIT6 +#define bmEXIF_IE5 bmBIT7 + + +#endif /* FX2REGS_H */ diff --git a/firmware/fx2/common/fx2utils.c b/firmware/fx2/common/fx2utils.c new file mode 100644 index 000000000..64ffcc896 --- /dev/null +++ b/firmware/fx2/common/fx2utils.c @@ -0,0 +1,54 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "fx2utils.h" +#include "fx2regs.h" +#include "delay.h" + +void +fx2_stall_ep0 (void) +{ + EP0CS |= bmEPSTALL; +} + +void +fx2_reset_data_toggle (unsigned char ep) +{ + TOGCTL = ((ep & 0x80) >> 3 | (ep & 0x0f)); + TOGCTL |= bmRESETTOGGLE; +} + +void +fx2_renumerate (void) +{ + USBCS |= bmDISCON | bmRENUM; + + // mdelay (1500); // FIXME why 1.5 seconds? + mdelay (250); // FIXME why 1.5 seconds? + + USBIRQ = 0xff; // clear any pending USB irqs... + EPIRQ = 0xff; // they're from before the renumeration + + EXIF &= ~bmEXIF_USBINT; + + USBCS &= ~bmDISCON; // reconnect USB +} diff --git a/firmware/fx2/common/fx2utils.h b/firmware/fx2/common/fx2utils.h new file mode 100644 index 000000000..b184dec27 --- /dev/null +++ b/firmware/fx2/common/fx2utils.h @@ -0,0 +1,31 @@ +/* -*- c -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef _FX2UTILS_H_ +#define _FX2UTILS_H_ + +void fx2_stall_ep0 (void); +void fx2_reset_data_toggle (unsigned char ep); +void fx2_renumerate (void); + + + +#endif /* _FX2UTILS_H_ */ diff --git a/firmware/fx2/common/i2c.c b/firmware/fx2/common/i2c.c new file mode 100644 index 000000000..0f238b5cf --- /dev/null +++ b/firmware/fx2/common/i2c.c @@ -0,0 +1,123 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "i2c.h" +#include "fx2regs.h" +#include <string.h> + + +// issue a stop bus cycle and wait for completion + + +// returns non-zero if successful, else 0 +unsigned char +i2c_read (unsigned char addr, xdata unsigned char *buf, unsigned char len) +{ + volatile unsigned char junk; + + if (len == 0) // reading zero bytes always works + return 1; + + while (I2CS & bmSTOP) // wait for stop to clear + ; + + I2CS = bmSTART; + I2DAT = (addr << 1) | 1; // write address and direction (1's the read bit) + + while ((I2CS & bmDONE) == 0) + ; + + if ((I2CS & bmBERR) || (I2CS & bmACK) == 0) // no device answered... + goto fail; + + if (len == 1) + I2CS |= bmLASTRD; + + junk = I2DAT; // trigger the first read cycle + + while (--len != 0){ + while ((I2CS & bmDONE) == 0) + ; + + if (I2CS & bmBERR) + goto fail; + + if (len == 1) + I2CS |= bmLASTRD; + + *buf++ = I2DAT; // get data, trigger another read + } + + // wait for final byte + + while ((I2CS & bmDONE) == 0) + ; + + if (I2CS & bmBERR) + goto fail; + + I2CS |= bmSTOP; + *buf = I2DAT; + + return 1; + + fail: + I2CS |= bmSTOP; + return 0; +} + + + +// returns non-zero if successful, else 0 +unsigned char +i2c_write (unsigned char addr, xdata const unsigned char *buf, unsigned char len) +{ + while (I2CS & bmSTOP) // wait for stop to clear + ; + + I2CS = bmSTART; + I2DAT = (addr << 1) | 0; // write address and direction (0's the write bit) + + while ((I2CS & bmDONE) == 0) + ; + + if ((I2CS & bmBERR) || (I2CS & bmACK) == 0) // no device answered... + goto fail; + + while (len > 0){ + I2DAT = *buf++; + len--; + + while ((I2CS & bmDONE) == 0) + ; + + if ((I2CS & bmBERR) || (I2CS & bmACK) == 0) // no device answered... + goto fail; + } + + I2CS |= bmSTOP; + return 1; + + fail: + I2CS |= bmSTOP; + return 0; +} diff --git a/firmware/fx2/common/i2c.h b/firmware/fx2/common/i2c.h new file mode 100644 index 000000000..273526dad --- /dev/null +++ b/firmware/fx2/common/i2c.h @@ -0,0 +1,32 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _I2C_H_ +#define _I2C_H_ + +// returns non-zero if successful, else 0 +unsigned char i2c_read (unsigned char addr, xdata unsigned char *buf, unsigned char len); + +// returns non-zero if successful, else 0 +unsigned char i2c_write (unsigned char addr, xdata const unsigned char *buf, unsigned char len); + +#endif /* _I2C_H_ */ diff --git a/firmware/fx2/common/init_gpif.c b/firmware/fx2/common/init_gpif.c new file mode 100644 index 000000000..edde919be --- /dev/null +++ b/firmware/fx2/common/init_gpif.c @@ -0,0 +1,59 @@ +/* + * USRP - Universal Software Radio Peripheral + * + * Copyright (C) 2003 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA + */ + +#include "usrp_common.h" + +// These are the tables generated by the Cypress GPIF Designer + +extern const char WaveData[128]; +extern const char FlowStates[36]; +extern const char InitData[7]; + +// The tool is kind of screwed up, in that it doesn't configure some +// of the ports correctly. We just use their tables and handle the +// initialization ourselves. They also declare that their static +// initialized data is in xdata, which screws us too. + +void +init_gpif (void) +{ + // we've already setup IFCONFIG before calling this... + + GPIFABORT = 0xFF; // abort any waveforms pending + SYNCDELAY; + + GPIFREADYCFG = InitData[ 0 ]; + GPIFCTLCFG = InitData[ 1 ]; + GPIFIDLECS = InitData[ 2 ]; + GPIFIDLECTL = InitData[ 3 ]; + // Hmmm, what's InitData[ 4 ] ... + GPIFWFSELECT = InitData[ 5 ]; + // GPIFREADYSTAT = InitData[ 6 ]; // I think this register is read only... + + { + BYTE i; + + for (i = 0; i < 128; i++){ + GPIF_WAVE_DATA[i] = WaveData[i]; + } + } + + FLOWSTATE = 0; /* ensure it's off */ +} diff --git a/firmware/fx2/common/isr.c b/firmware/fx2/common/isr.c new file mode 100644 index 000000000..05412daf5 --- /dev/null +++ b/firmware/fx2/common/isr.c @@ -0,0 +1,167 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "isr.h" +#include "fx2regs.h" +#include "syncdelay.h" + +extern xdata unsigned char _standard_interrupt_vector[]; +extern xdata unsigned char _usb_autovector[]; +extern xdata unsigned char _fifo_gpif_autovector[]; + +#define LJMP_OPCODE 0x02 + +/* + * Hook standard interrupt vector. + * + * vector_number is from the SV_<foo> list. + * addr is the address of the interrupt service routine. + */ +void +hook_sv (unsigned char vector_number, unsigned short addr) +{ + bit t; + + // sanity checks + + if (vector_number < SV_MIN || vector_number > SV_MAX) + return; + + if ((vector_number & 0x0f) != 0x03 && (vector_number & 0x0f) != 0x0b) + return; + + t = EA; + EA = 0; + _standard_interrupt_vector[vector_number] = LJMP_OPCODE; + _standard_interrupt_vector[vector_number + 1] = addr >> 8; + _standard_interrupt_vector[vector_number + 2] = addr & 0xff; + EA = t; +} + +/* + * Hook usb interrupt vector. + * + * vector_number is from the UV_<foo> list. + * addr is the address of the interrupt service routine. + */ +void +hook_uv (unsigned char vector_number, unsigned short addr) +{ + bit t; + + // sanity checks + + if (vector_number < UV_MIN || vector_number > UV_MAX) + return; + + if ((vector_number & 0x3) != 0) + return; + + t = EA; + EA = 0; + _usb_autovector[vector_number] = LJMP_OPCODE; + _usb_autovector[vector_number + 1] = addr >> 8; + _usb_autovector[vector_number + 2] = addr & 0xff; + EA = t; +} + +/* + * Hook fifo/gpif interrupt vector. + * + * vector_number is from the FGV_<foo> list. + * addr is the address of the interrupt service routine. + */ +void +hook_fgv (unsigned char vector_number, unsigned short addr) +{ + bit t; + + // sanity checks + + if (vector_number < FGV_MIN || vector_number > FGV_MAX) + return; + + if ((vector_number & 0x3) != 0) + return; + + t = EA; + EA = 0; + _fifo_gpif_autovector[vector_number] = LJMP_OPCODE; + _fifo_gpif_autovector[vector_number + 1] = addr >> 8; + _fifo_gpif_autovector[vector_number + 2] = addr & 0xff; + EA = t; +} + +/* + * One time call to enable autovectoring for both USB and FIFO/GPIF. + * + * This disables all USB and FIFO/GPIF interrupts and clears + * any pending interrupts too. It leaves the master USB and FIFO/GPIF + * interrupts enabled. + */ +void +setup_autovectors (void) +{ + // disable master usb and fifo/gpif interrupt enables + EIUSB = 0; + EIEX4 = 0; + + hook_sv (SV_INT_2, (unsigned short) _usb_autovector); + hook_sv (SV_INT_4, (unsigned short) _fifo_gpif_autovector); + + // disable all fifo interrupt enables + SYNCDELAY; + EP2FIFOIE = 0; SYNCDELAY; + EP4FIFOIE = 0; SYNCDELAY; + EP6FIFOIE = 0; SYNCDELAY; + EP8FIFOIE = 0; SYNCDELAY; + + // clear all pending fifo irqs + EP2FIFOIRQ = 0xff; SYNCDELAY; + EP4FIFOIRQ = 0xff; SYNCDELAY; + EP6FIFOIRQ = 0xff; SYNCDELAY; + EP8FIFOIRQ = 0xff; SYNCDELAY; + + IBNIE = 0; + IBNIRQ = 0xff; + NAKIE = 0; + NAKIRQ = 0xff; + USBIE = 0; + USBIRQ = 0xff; + EPIE = 0; + EPIRQ = 0xff; + SYNCDELAY; GPIFIE = 0; + SYNCDELAY; GPIFIRQ = 0xff; + USBERRIE = 0; + USBERRIRQ = 0xff; + CLRERRCNT = 0; + + INTSETUP = bmAV2EN | bmAV4EN | bmINT4IN; + + // clear master irq's for usb and fifo/gpif + EXIF &= ~bmEXIF_USBINT; + EXIF &= ~bmEXIF_IE4; + + // enable master usb and fifo/gpif interrrupts + EIUSB = 1; + EIEX4 = 1; +} diff --git a/firmware/fx2/common/isr.h b/firmware/fx2/common/isr.h new file mode 100644 index 000000000..856532890 --- /dev/null +++ b/firmware/fx2/common/isr.h @@ -0,0 +1,172 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ISR_H_ +#define _ISR_H_ + +/* + * ---------------------------------------------------------------- + * routines for managing interrupt services routines + * ---------------------------------------------------------------- + */ + +/* + * The FX2 has three discrete sets of interrupt vectors. + * The first set is the standard 8051 vector (13 8-byte entries). + * The second set is USB interrupt autovector (32 4-byte entries). + * The third set is the FIFO/GPIF autovector (14 4-byte entries). + * + * Since all the code we're running in the FX2 is ram based, we + * forego the typical "initialize the interrupt vectors at link time" + * strategy, in favor of calls at run time that install the correct + * pointers to functions. + */ + +/* + * Standard Vector numbers + */ + +#define SV_INT_0 0x03 +#define SV_TIMER_0 0x0b +#define SV_INT_1 0x13 +#define SV_TIMER_1 0x1b +#define SV_SERIAL_0 0x23 +#define SV_TIMER_2 0x2b +#define SV_RESUME 0x33 +#define SV_SERIAL_1 0x3b +#define SV_INT_2 0x43 // (INT_2) points at USB autovector +#define SV_I2C 0x4b +#define SV_INT_4 0x53 // (INT_4) points at FIFO/GPIF autovector +#define SV_INT_5 0x5b +#define SV_INT_6 0x63 + +#define SV_MIN SV_INT_0 +#define SV_MAX SV_INT_6 + +/* + * USB Auto Vector numbers + */ + +#define UV_SUDAV 0x00 +#define UV_SOF 0x04 +#define UV_SUTOK 0x08 +#define UV_SUSPEND 0x0c +#define UV_USBRESET 0x10 +#define UV_HIGHSPEED 0x14 +#define UV_EP0ACK 0x18 +#define UV_SPARE_1C 0x1c +#define UV_EP0IN 0x20 +#define UV_EP0OUT 0x24 +#define UV_EP1IN 0x28 +#define UV_EP1OUT 0x2c +#define UV_EP2 0x30 +#define UV_EP4 0x34 +#define UV_EP6 0x38 +#define UV_EP8 0x3c +#define UV_IBN 0x40 +#define UV_SPARE_44 0x44 +#define UV_EP0PINGNAK 0x48 +#define UV_EP1PINGNAK 0x4c +#define UV_EP2PINGNAK 0x50 +#define UV_EP4PINGNAK 0x54 +#define UV_EP6PINGNAK 0x58 +#define UV_EP8PINGNAK 0x5c +#define UV_ERRLIMIT 0x60 +#define UV_SPARE_64 0x64 +#define UV_SPARE_68 0x68 +#define UV_SPARE_6C 0x6c +#define UV_EP2ISOERR 0x70 +#define UV_EP4ISOERR 0x74 +#define UV_EP6ISOERR 0x78 +#define UV_EP8ISOERR 0x7c + +#define UV_MIN UV_SUDAV +#define UV_MAX UV_EP8ISOERR + +/* + * FIFO/GPIF Auto Vector numbers + */ + +#define FGV_EP2PF 0x00 +#define FGV_EP4PF 0x04 +#define FGV_EP6PF 0x08 +#define FGV_EP8PF 0x0c +#define FGV_EP2EF 0x10 +#define FGV_EP4EF 0x14 +#define FGV_EP6EF 0x18 +#define FGV_EP8EF 0x1c +#define FGV_EP2FF 0x20 +#define FGV_EP4FF 0x24 +#define FGV_EP6FF 0x28 +#define FGV_EP8FF 0x2c +#define FGV_GPIFDONE 0x30 +#define FGV_GPIFWF 0x34 + +#define FGV_MIN FGV_EP2PF +#define FGV_MAX FGV_GPIFWF + + +/* + * Hook standard interrupt vector. + * + * vector_number is from the SV_<foo> list above. + * addr is the address of the interrupt service routine. + */ +void hook_sv (unsigned char vector_number, unsigned short addr); + +/* + * Hook usb interrupt vector. + * + * vector_number is from the UV_<foo> list above. + * addr is the address of the interrupt service routine. + */ +void hook_uv (unsigned char vector_number, unsigned short addr); + +/* + * Hook fifo/gpif interrupt vector. + * + * vector_number is from the FGV_<foo> list above. + * addr is the address of the interrupt service routine. + */ +void hook_fgv (unsigned char vector_number, unsigned short addr); + +/* + * One time call to enable autovectoring for both USB and FIFO/GPIF + */ +void setup_autovectors (void); + + +/* + * Must be called in each usb interrupt handler + */ +#define clear_usb_irq() \ + EXIF &= ~bmEXIF_USBINT; \ + INT2CLR = 0 + +/* + * Must be calledin each fifo/gpif interrupt handler + */ +#define clear_fifo_gpif_irq() \ + EXIF &= ~bmEXIF_IE4; \ + INT4CLR = 0 + +#endif /* _ISR_H_ */ diff --git a/firmware/fx2/common/spi.c b/firmware/fx2/common/spi.c new file mode 100644 index 000000000..04a1d8477 --- /dev/null +++ b/firmware/fx2/common/spi.c @@ -0,0 +1,381 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004,2006 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "spi.h" +#include "usrp_regs.h" + +static void +setup_enables (unsigned char enables) +{ + // Software eanbles are active high. + // Hardware enables are active low. + + // Uhh, the CODECs are active low, but the FPGA is active high... + enables ^= SPI_ENABLE_FPGA; + + // KLUDGE: This code is fragile, but reasonably fast... + // low three bits of enables go into port A + USRP_PA = USRP_PA | (0x7 << 3); // disable FPGA, CODEC_A, CODEC_B + USRP_PA ^= (enables & 0x7) << 3; // enable specified devs + + // high four bits of enables go into port E + USRP_PE = USRP_PE | (0xf << 4); // disable TX_A, RX_A, TX_B, RX_B + USRP_PE ^= (enables & 0xf0); // enable specified devs +} + +#define disable_all() setup_enables (0) + +void +init_spi (void) +{ + disable_all (); /* disable all devs */ + bitS_OUT = 0; /* idle state has CLK = 0 */ +} + +#if 0 +static unsigned char +count_bits8 (unsigned char v) +{ + static unsigned char count4[16] = { + 0, // 0 + 1, // 1 + 1, // 2 + 2, // 3 + 1, // 4 + 2, // 5 + 2, // 6 + 3, // 7 + 1, // 8 + 2, // 9 + 2, // a + 3, // b + 2, // c + 3, // d + 3, // e + 4 // f + }; + return count4[v & 0xf] + count4[(v >> 4) & 0xf]; +} + +#else + +static unsigned char +count_bits8 (unsigned char v) +{ + unsigned char count = 0; + if (v & (1 << 0)) count++; + if (v & (1 << 1)) count++; + if (v & (1 << 2)) count++; + if (v & (1 << 3)) count++; + if (v & (1 << 4)) count++; + if (v & (1 << 5)) count++; + if (v & (1 << 6)) count++; + if (v & (1 << 7)) count++; + return count; +} +#endif + +static void +write_byte_msb (unsigned char v); + +static void +write_bytes_msb (const xdata unsigned char *buf, unsigned char len); + +static void +read_bytes_msb (xdata unsigned char *buf, unsigned char len); + + +// returns non-zero if successful, else 0 +unsigned char +spi_read (unsigned char header_hi, unsigned char header_lo, + unsigned char enables, unsigned char format, + xdata unsigned char *buf, unsigned char len) +{ + if (count_bits8 (enables) > 1) + return 0; // error, too many enables set + + setup_enables (enables); + + if (format & SPI_FMT_LSB){ // order: LSB +#if 1 + return 0; // error, not implemented +#else + switch (format & SPI_FMR_HDR_MASK){ + case SPI_FMT_HDR_0: + break; + case SPI_FMT_HDR_1: + write_byte_lsb (header_lo); + break; + case SPI_FMT_HDR_2: + write_byte_lsb (header_lo); + write_byte_lsb (header_hi); + break; + default: + return 0; // error + } + if (len != 0) + read_bytes_lsb (buf, len); +#endif + } + + else { // order: MSB + + switch (format & SPI_FMT_HDR_MASK){ + case SPI_FMT_HDR_0: + break; + case SPI_FMT_HDR_1: + write_byte_msb (header_lo); + break; + case SPI_FMT_HDR_2: + write_byte_msb (header_hi); + write_byte_msb (header_lo); + break; + default: + return 0; // error + } + if (len != 0) + read_bytes_msb (buf, len); + } + + disable_all (); + return 1; // success +} + + +// returns non-zero if successful, else 0 +unsigned char +spi_write (unsigned char header_hi, unsigned char header_lo, + unsigned char enables, unsigned char format, + const xdata unsigned char *buf, unsigned char len) +{ + setup_enables (enables); + + if (format & SPI_FMT_LSB){ // order: LSB +#if 1 + return 0; // error, not implemented +#else + switch (format & SPI_FMR_HDR_MASK){ + case SPI_FMT_HDR_0: + break; + case SPI_FMT_HDR_1: + write_byte_lsb (header_lo); + break; + case SPI_FMT_HDR_2: + write_byte_lsb (header_lo); + write_byte_lsb (header_hi); + break; + default: + return 0; // error + } + if (len != 0) + write_bytes_lsb (buf, len); +#endif + } + + else { // order: MSB + + switch (format & SPI_FMT_HDR_MASK){ + case SPI_FMT_HDR_0: + break; + case SPI_FMT_HDR_1: + write_byte_msb (header_lo); + break; + case SPI_FMT_HDR_2: + write_byte_msb (header_hi); + write_byte_msb (header_lo); + break; + default: + return 0; // error + } + if (len != 0) + write_bytes_msb (buf, len); + } + + disable_all (); + return 1; // success +} + +// ---------------------------------------------------------------- + +static void +write_byte_msb (unsigned char v) +{ + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; + + v = (v << 1) | (v >> 7); // rotate left (MSB into bottom bit) + bitS_OUT = v & 0x1; + bitS_CLK = 1; + bitS_CLK = 0; +} + +static void +write_bytes_msb (const xdata unsigned char *buf, unsigned char len) +{ + while (len-- != 0){ + write_byte_msb (*buf++); + } +} + +#if 0 +/* + * This is incorrectly compiled by SDCC 2.4.0 + */ +static unsigned char +read_byte_msb (void) +{ + unsigned char v = 0; + + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + v = v << 1; + bitS_CLK = 1; + v |= bitS_IN; + bitS_CLK = 0; + + return v; +} +#else +static unsigned char +read_byte_msb (void) _naked +{ + _asm + clr a + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + setb _bitS_CLK + mov c, _bitS_IN + rlc a + clr _bitS_CLK + + mov dpl,a + ret + _endasm; +} +#endif + +static void +read_bytes_msb (xdata unsigned char *buf, unsigned char len) +{ + while (len-- != 0){ + *buf++ = read_byte_msb (); + } +} + diff --git a/firmware/fx2/common/spi.h b/firmware/fx2/common/spi.h new file mode 100644 index 000000000..12bc5e544 --- /dev/null +++ b/firmware/fx2/common/spi.h @@ -0,0 +1,43 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef INCLUDED_SPI_H +#define INCLUDED_SPI_H + +#include "usrp_spi_defs.h" + +void init_spi (void); // one time call to init + +// returns non-zero if successful, else 0 +unsigned char +spi_read (unsigned char header_hi, unsigned char header_lo, + unsigned char enables, unsigned char format, + xdata unsigned char *buf, unsigned char len); + +// returns non-zero if successful, else 0 +unsigned char +spi_write (unsigned char header_hi, unsigned char header_lo, + unsigned char enables, unsigned char format, + const xdata unsigned char *buf, unsigned char len); + + +#endif /* INCLUDED_SPI_H */ diff --git a/firmware/fx2/common/syncdelay.h b/firmware/fx2/common/syncdelay.h new file mode 100644 index 000000000..0af7d099f --- /dev/null +++ b/firmware/fx2/common/syncdelay.h @@ -0,0 +1,65 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef _SYNCDELAY_H_ +#define _SYNCDELAY_H_ + +/* + * Magic delay required between access to certain xdata registers (TRM page 15-106). + * For our configuration, 48 MHz FX2 / 48 MHz IFCLK, we need three cycles. Each + * NOP is a single cycle.... + * + * From TRM page 15-105: + * + * Under certain conditions, some read and write access to the FX2 registers must + * be separated by a "synchronization delay". The delay is necessary only under the + * following conditions: + * + * - between a write to any register in the 0xE600 - 0xE6FF range and a write to one + * of the registers listed below. + * + * - between a write to one of the registers listed below and a read from any register + * in the 0xE600 - 0xE6FF range. + * + * Registers which require a synchronization delay: + * + * FIFORESET FIFOPINPOLAR + * INPKTEND EPxBCH:L + * EPxFIFOPFH:L EPxAUTOINLENH:L + * EPxFIFOCFG EPxGPIFFLGSEL + * PINFLAGSAB PINFLAGSCD + * EPxFIFOIE EPxFIFOIRQ + * GPIFIE GPIFIRQ + * UDMACRCH:L GPIFADRH:L + * GPIFTRIG EPxGPIFTRIG + * OUTPKTEND REVCTL + * GPIFTCB3 GPIFTCB2 + * GPIFTCB1 GPIFTCB0 + */ + +/* + * FIXME ensure that the peep hole optimizer isn't screwing us + */ +#define SYNCDELAY _asm nop; nop; nop; _endasm +#define NOP _asm nop; _endasm + + +#endif /* _SYNCDELAY_H_ */ diff --git a/firmware/fx2/common/timer.c b/firmware/fx2/common/timer.c new file mode 100644 index 000000000..97e2f7cf9 --- /dev/null +++ b/firmware/fx2/common/timer.c @@ -0,0 +1,49 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "timer.h" +#include "fx2regs.h" +#include "isr.h" + +/* + * Arrange to have isr_tick_handler called at 100 Hz. + * + * The cpu clock is running at 48e6. The input to the timer + * is 48e6 / 12 = 4e6. + * + * We arrange to have the timer overflow every 40000 clocks == 100 Hz + */ + +#define RELOAD_VALUE ((unsigned short) -40000) + +void +hook_timer_tick (unsigned short isr_tick_handler) +{ + ET2 = 0; // disable timer 2 interrupts + hook_sv (SV_TIMER_2, isr_tick_handler); + + RCAP2H = RELOAD_VALUE >> 8; // setup the auto reload value + RCAP2L = RELOAD_VALUE; + + T2CON = 0x04; // interrupt on overflow; reload; run + ET2 = 1; // enable timer 2 interrupts +} diff --git a/firmware/fx2/common/timer.h b/firmware/fx2/common/timer.h new file mode 100644 index 000000000..3181874d5 --- /dev/null +++ b/firmware/fx2/common/timer.h @@ -0,0 +1,35 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _TIMER_H_ +#define _TIMER_H_ + +/* + * Arrange to have isr_tick_handler called at 100 Hz + */ +void hook_timer_tick (unsigned short isr_tick_handler); + +#define clear_timer_irq() \ + TF2 = 0 /* clear overflow flag */ + + +#endif /* _TIMER_H_ */ diff --git a/firmware/fx2/common/usb_common.c b/firmware/fx2/common/usb_common.c new file mode 100644 index 000000000..3b0547b2f --- /dev/null +++ b/firmware/fx2/common/usb_common.c @@ -0,0 +1,386 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "usb_common.h" +#include "fx2regs.h" +#include "syncdelay.h" +#include "fx2utils.h" +#include "isr.h" +#include "usb_descriptors.h" +#include "usb_requests.h" + +extern xdata char str0[]; +extern xdata char str1[]; +extern xdata char str2[]; +extern xdata char str3[]; +extern xdata char str4[]; +extern xdata char str5[]; + + +#define bRequestType SETUPDAT[0] +#define bRequest SETUPDAT[1] +#define wValueL SETUPDAT[2] +#define wValueH SETUPDAT[3] +#define wIndexL SETUPDAT[4] +#define wIndexH SETUPDAT[5] +#define wLengthL SETUPDAT[6] +#define wLengthH SETUPDAT[7] + +#define MSB(x) (((unsigned short) x) >> 8) +#define LSB(x) (((unsigned short) x) & 0xff) + +volatile bit _usb_got_SUDAV; + +unsigned char _usb_config = 0; +unsigned char _usb_alt_setting = 0; // FIXME really 1/interface + +xdata unsigned char *current_device_descr; +xdata unsigned char *current_devqual_descr; +xdata unsigned char *current_config_descr; +xdata unsigned char *other_config_descr; + +static void +setup_descriptors (void) +{ + if (USBCS & bmHSM){ // high speed mode + current_device_descr = high_speed_device_descr; + current_devqual_descr = high_speed_devqual_descr; + current_config_descr = high_speed_config_descr; + other_config_descr = full_speed_config_descr; + } + else { + current_device_descr = full_speed_device_descr; + current_devqual_descr = full_speed_devqual_descr; + current_config_descr = full_speed_config_descr; + other_config_descr = high_speed_config_descr; + } + + // whack the type fields + // FIXME, may not be required. + // current_config_descr[1] = DT_CONFIG; + // other_config_descr[1] = DT_OTHER_SPEED; +} + +static void +isr_SUDAV (void) interrupt +{ + clear_usb_irq (); + _usb_got_SUDAV = 1; +} + +static void +isr_USBRESET (void) interrupt +{ + clear_usb_irq (); + setup_descriptors (); +} + +static void +isr_HIGHSPEED (void) interrupt +{ + clear_usb_irq (); + setup_descriptors (); +} + +void +usb_install_handlers (void) +{ + setup_descriptors (); // ensure that they're set before use + + hook_uv (UV_SUDAV, (unsigned short) isr_SUDAV); + hook_uv (UV_USBRESET, (unsigned short) isr_USBRESET); + hook_uv (UV_HIGHSPEED, (unsigned short) isr_HIGHSPEED); + + USBIE = bmSUDAV | bmURES | bmHSGRANT; +} + +// On the FX2 the only plausible endpoints are 0, 1, 2, 4, 6, 8 +// This doesn't check to see that they're enabled + +unsigned char +plausible_endpoint (unsigned char ep) +{ + ep &= ~0x80; // ignore direction bit + + if (ep > 8) + return 0; + + if (ep == 1) + return 1; + + return (ep & 0x1) == 0; // must be even +} + +// return pointer to control and status register for endpoint. +// only called with plausible_endpoints + +xdata volatile unsigned char * +epcs (unsigned char ep) +{ + if (ep == 0x01) // ep1 has different in and out CS regs + return EP1OUTCS; + + if (ep == 0x81) + return EP1INCS; + + ep &= ~0x80; // ignore direction bit + + if (ep == 0x00) // ep0 + return EP0CS; + + return EP2CS + (ep >> 1); // 2, 4, 6, 8 are consecutive +} + +void +usb_handle_setup_packet (void) +{ + _usb_got_SUDAV = 0; + + // handle the standard requests... + + switch (bRequestType & bmRT_TYPE_MASK){ + + case bmRT_TYPE_CLASS: + case bmRT_TYPE_RESERVED: + fx2_stall_ep0 (); // we don't handle these. indicate error + break; + + case bmRT_TYPE_VENDOR: + // call the application code. + // If it handles the command it returns non-zero + + if (!app_vendor_cmd ()) + fx2_stall_ep0 (); + break; + + case bmRT_TYPE_STD: + // these are the standard requests... + + if ((bRequestType & bmRT_DIR_MASK) == bmRT_DIR_IN){ + + //////////////////////////////////// + // handle the IN requests + //////////////////////////////////// + + switch (bRequest){ + + case RQ_GET_CONFIG: + EP0BUF[0] = _usb_config; // FIXME app should handle + EP0BCH = 0; + EP0BCL = 1; + break; + + // -------------------------------- + + case RQ_GET_INTERFACE: + EP0BUF[0] = _usb_alt_setting; // FIXME app should handle + EP0BCH = 0; + EP0BCL = 1; + break; + + // -------------------------------- + + case RQ_GET_DESCR: + switch (wValueH){ + + case DT_DEVICE: + SUDPTRH = MSB (current_device_descr); + SUDPTRL = LSB (current_device_descr); + break; + + case DT_DEVQUAL: + SUDPTRH = MSB (current_devqual_descr); + SUDPTRL = LSB (current_devqual_descr); + break; + + case DT_CONFIG: + if (0 && wValueL != 1) // FIXME only a single configuration + fx2_stall_ep0 (); + else { + SUDPTRH = MSB (current_config_descr); + SUDPTRL = LSB (current_config_descr); + } + break; + + case DT_OTHER_SPEED: + if (0 && wValueL != 1) // FIXME only a single configuration + fx2_stall_ep0 (); + else { + SUDPTRH = MSB (other_config_descr); + SUDPTRL = LSB (other_config_descr); + } + break; + + case DT_STRING: + if (wValueL >= nstring_descriptors) + fx2_stall_ep0 (); + else { + xdata char *p = string_descriptors[wValueL]; + SUDPTRH = MSB (p); + SUDPTRL = LSB (p); + } + break; + + default: + fx2_stall_ep0 (); // invalid request + break; + } + break; + + // -------------------------------- + + case RQ_GET_STATUS: + switch (bRequestType & bmRT_RECIP_MASK){ + case bmRT_RECIP_DEVICE: + EP0BUF[0] = bmGSDA_SELF_POWERED; // FIXME app should handle + EP0BUF[1] = 0; + EP0BCH = 0; + EP0BCL = 2; + break; + + case bmRT_RECIP_INTERFACE: + EP0BUF[0] = 0; + EP0BUF[1] = 0; + EP0BCH = 0; + EP0BCL = 2; + break; + + case bmRT_RECIP_ENDPOINT: + if (plausible_endpoint (wIndexL)){ + EP0BUF[0] = *epcs (wIndexL) & bmEPSTALL; + EP0BUF[1] = 0; + EP0BCH = 0; + EP0BCL = 2; + } + else + fx2_stall_ep0 (); + break; + + default: + fx2_stall_ep0 (); + break; + } + break; + + // -------------------------------- + + case RQ_SYNCH_FRAME: // not implemented + default: + fx2_stall_ep0 (); + break; + } + } + + else { + + //////////////////////////////////// + // handle the OUT requests + //////////////////////////////////// + + switch (bRequest){ + + case RQ_SET_CONFIG: + _usb_config = wValueL; // FIXME app should handle + break; + + case RQ_SET_INTERFACE: + _usb_alt_setting = wValueL; // FIXME app should handle + break; + + // -------------------------------- + + case RQ_CLEAR_FEATURE: + switch (bRequestType & bmRT_RECIP_MASK){ + + case bmRT_RECIP_DEVICE: + switch (wValueL){ + case FS_DEV_REMOTE_WAKEUP: + default: + fx2_stall_ep0 (); + } + break; + + case bmRT_RECIP_ENDPOINT: + if (wValueL == FS_ENDPOINT_HALT && plausible_endpoint (wIndexL)){ + *epcs (wIndexL) &= ~bmEPSTALL; + fx2_reset_data_toggle (wIndexL); + } + else + fx2_stall_ep0 (); + break; + + default: + fx2_stall_ep0 (); + break; + } + break; + + // -------------------------------- + + case RQ_SET_FEATURE: + switch (bRequestType & bmRT_RECIP_MASK){ + + case bmRT_RECIP_DEVICE: + switch (wValueL){ + case FS_TEST_MODE: + // hardware handles this after we complete SETUP phase handshake + break; + + case FS_DEV_REMOTE_WAKEUP: + default: + fx2_stall_ep0 (); + break; + } + } + break; + + case bmRT_RECIP_ENDPOINT: + switch (wValueL){ + case FS_ENDPOINT_HALT: + if (plausible_endpoint (wIndexL)) + *epcs (wIndexL) |= bmEPSTALL; + else + fx2_stall_ep0 (); + break; + + default: + fx2_stall_ep0 (); + break; + } + break; + + // -------------------------------- + + case RQ_SET_ADDRESS: // handled by fx2 hardware + case RQ_SET_DESCR: // not implemented + default: + fx2_stall_ep0 (); + } + + } + break; + + } // bmRT_TYPE_MASK + + // ack handshake phase of device request + EP0CS |= bmHSNAK; +} diff --git a/firmware/fx2/common/usb_common.h b/firmware/fx2/common/usb_common.h new file mode 100644 index 000000000..ae07b236c --- /dev/null +++ b/firmware/fx2/common/usb_common.h @@ -0,0 +1,37 @@ +/* -*- c -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _USB_COMMON_H_ +#define _USB_COMMON_H_ + +extern volatile bit _usb_got_SUDAV; + +// Provided by user application to handle VENDOR commands. +// returns non-zero if it handled the command. +unsigned char app_vendor_cmd (void); + +void usb_install_handlers (void); +void usb_handle_setup_packet (void); + +#define usb_setup_packet_avail() _usb_got_SUDAV + +#endif /* _USB_COMMON_H_ */ diff --git a/firmware/fx2/common/usb_descriptors.h b/firmware/fx2/common/usb_descriptors.h new file mode 100644 index 000000000..0b8c6212f --- /dev/null +++ b/firmware/fx2/common/usb_descriptors.h @@ -0,0 +1,40 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +extern xdata const char high_speed_device_descr[]; +extern xdata const char high_speed_devqual_descr[]; +extern xdata const char high_speed_config_descr[]; + +extern xdata const char full_speed_device_descr[]; +extern xdata const char full_speed_devqual_descr[]; +extern xdata const char full_speed_config_descr[]; + +extern xdata unsigned char nstring_descriptors; +extern xdata char * xdata string_descriptors[]; + +/* + * We patch these locations with info read from the usrp config eeprom + */ +extern xdata char usb_desc_hw_rev_binary_patch_location_0[]; +extern xdata char usb_desc_hw_rev_binary_patch_location_1[]; +extern xdata char usb_desc_hw_rev_ascii_patch_location_0[]; +extern xdata char usb_desc_serial_number_ascii[]; diff --git a/firmware/fx2/common/usb_requests.h b/firmware/fx2/common/usb_requests.h new file mode 100644 index 000000000..7a543abb0 --- /dev/null +++ b/firmware/fx2/common/usb_requests.h @@ -0,0 +1,88 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +// Standard USB requests. +// These are contained in end point 0 setup packets + + +#ifndef _USB_REQUESTS_H_ +#define _USB_REQUESTS_H_ + +// format of bmRequestType byte + +#define bmRT_DIR_MASK (0x1 << 7) +#define bmRT_DIR_IN (1 << 7) +#define bmRT_DIR_OUT (0 << 7) + +#define bmRT_TYPE_MASK (0x3 << 5) +#define bmRT_TYPE_STD (0 << 5) +#define bmRT_TYPE_CLASS (1 << 5) +#define bmRT_TYPE_VENDOR (2 << 5) +#define bmRT_TYPE_RESERVED (3 << 5) + +#define bmRT_RECIP_MASK (0x1f << 0) +#define bmRT_RECIP_DEVICE (0 << 0) +#define bmRT_RECIP_INTERFACE (1 << 0) +#define bmRT_RECIP_ENDPOINT (2 << 0) +#define bmRT_RECIP_OTHER (3 << 0) + + +// standard request codes (bRequest) + +#define RQ_GET_STATUS 0 +#define RQ_CLEAR_FEATURE 1 +#define RQ_RESERVED_2 2 +#define RQ_SET_FEATURE 3 +#define RQ_RESERVED_4 4 +#define RQ_SET_ADDRESS 5 +#define RQ_GET_DESCR 6 +#define RQ_SET_DESCR 7 +#define RQ_GET_CONFIG 8 +#define RQ_SET_CONFIG 9 +#define RQ_GET_INTERFACE 10 +#define RQ_SET_INTERFACE 11 +#define RQ_SYNCH_FRAME 12 + +// standard descriptor types + +#define DT_DEVICE 1 +#define DT_CONFIG 2 +#define DT_STRING 3 +#define DT_INTERFACE 4 +#define DT_ENDPOINT 5 +#define DT_DEVQUAL 6 +#define DT_OTHER_SPEED 7 +#define DT_INTERFACE_POWER 8 + +// standard feature selectors + +#define FS_ENDPOINT_HALT 0 // recip: endpoint +#define FS_DEV_REMOTE_WAKEUP 1 // recip: device +#define FS_TEST_MODE 2 // recip: device + +// Get Status device attributes + +#define bmGSDA_SELF_POWERED 0x01 +#define bmGSDA_REM_WAKEUP 0x02 + + +#endif /* _USB_REQUESTS_H_ */ diff --git a/firmware/fx2/common/usrp_commands.h b/firmware/fx2/common/usrp_commands.h new file mode 100644 index 000000000..2466729b2 --- /dev/null +++ b/firmware/fx2/common/usrp_commands.h @@ -0,0 +1,105 @@ +/* + * USRP - Universal Software Radio Peripheral + * + * Copyright (C) 2003,2004 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA + */ + +#ifndef _USRP_COMMANDS_H_ +#define _USRP_COMMANDS_H_ + +#include <usrp_interfaces.h> +#include <usrp_spi_defs.h> + +#define MAX_EP0_PKTSIZE 64 // max size of EP0 packet on FX2 + +// ---------------------------------------------------------------- +// Vendor bmRequestType's +// ---------------------------------------------------------------- + +#define VRT_VENDOR_IN 0xC0 +#define VRT_VENDOR_OUT 0x40 + +// ---------------------------------------------------------------- +// USRP Vendor Requests +// +// Note that Cypress reserves [0xA0,0xAF]. +// 0xA0 is the firmware load function. +// ---------------------------------------------------------------- + + +// IN commands + +#define VRQ_GET_STATUS 0x80 +#define GS_TX_UNDERRUN 0 // wIndexL // returns 1 byte +#define GS_RX_OVERRUN 1 // wIndexL // returns 1 byte + +#define VRQ_I2C_READ 0x81 // wValueL: i2c address; length: how much to read + +#define VRQ_SPI_READ 0x82 // wValue: optional header bytes + // wIndexH: enables + // wIndexL: format + // len: how much to read + +#define VRQ_FW_COMPAT 0x83 //low 16 bits + +// OUT commands + +#define VRQ_SET_LED 0x01 // wValueL off/on {0,1}; wIndexL: which {0,1} + +#define VRQ_FPGA_LOAD 0x02 +# define FL_BEGIN 0 // wIndexL: begin fpga programming cycle. stalls if trouble. +# define FL_XFER 1 // wIndexL: xfer up to 64 bytes of data +# define FL_END 2 // wIndexL: end programming cycle, check for success. + // stalls endpoint if trouble. + +#define VRQ_FPGA_WRITE_REG 0x03 // wIndexL: regno; data: 32-bit regval MSB first +#define VRQ_FPGA_SET_RESET 0x04 // wValueL: {0,1} +#define VRQ_FPGA_SET_TX_ENABLE 0x05 // wValueL: {0,1} +#define VRQ_FPGA_SET_RX_ENABLE 0x06 // wValueL: {0,1} +// see below VRQ_FPGA_SET_{TX,RX}_RESET + +#define VRQ_SET_SLEEP_BITS 0x07 // wValueH: mask; wValueL: bits. set bits given by mask to bits + +# define SLEEP_ADC0 0x01 +# define SLEEP_ADC1 0x02 +# define SLEEP_DAC0 0x04 +# define SLEEP_DAC1 0x08 + +#define VRQ_I2C_WRITE 0x08 // wValueL: i2c address; data: data + +#define VRQ_SPI_WRITE 0x09 // wValue: optional header bytes + // wIndexH: enables + // wIndexL: format + // len: how much to write + +#define VRQ_FPGA_SET_TX_RESET 0x0a // wValueL: {0, 1} +#define VRQ_FPGA_SET_RX_RESET 0x0b // wValueL: {0, 1} + +#define VRQ_RESET_GPIF 0x0c +#define VRQ_ENABLE_GPIF 0x0d +#define VRQ_CLEAR_FPGA_FIFO 0x0e + + +// ------------------------------------------------------------------- +// we store the hashes at fixed addresses in the FX2 internal memory + +#define USRP_HASH_SLOT_0_ADDR 0xe1e0 +#define USRP_HASH_SLOT_1_ADDR 0xe1f0 + + + +#endif /* _USRP_COMMANDS_H_ */ diff --git a/firmware/fx2/common/usrp_common.h b/firmware/fx2/common/usrp_common.h new file mode 100644 index 000000000..fd203927f --- /dev/null +++ b/firmware/fx2/common/usrp_common.h @@ -0,0 +1,77 @@ +/* + * USRP - Universal Software Radio Peripheral + * + * Copyright (C) 2003,2006 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA + */ + +/* + * common defines and prototypes for USRP + * + * In comments below "TRM" refers to the EZ-USB FX2 Technical Reference Manual + */ + +#ifndef _USRPCOMMON_H_ +#define _USRPCOMMON_H_ + +#include "usrp_config.h" +#include "usrp_regs.h" +#include "syncdelay.h" + +/* + * From TRM page 15-105: + * + * Under certain conditions, some read and write access to the FX2 + * registers must be separated by a "synchronization delay". The + * delay is necessary only under the following conditions: + * + * - between a write to any register in the 0xE600 - 0xE6FF range + * and a write to one of the registers listed below. + * + * - between a write to one of the registers listed below and a read + * from any register in the 0xE600 - 0xE6FF range. + * + * Registers which require a synchronization delay: + * + * FIFORESET FIFOPINPOLAR + * INPKTEND EPxBCH:L + * EPxFIFOPFH:L EPxAUTOINLENH:L + * EPxFIFOCFG EPxGPIFFLGSEL + * PINFLAGSAB PINFLAGSCD + * EPxFIFOIE EPxFIFOIRQ + * GPIFIE GPIFIRQ + * UDMACRCH:L GPIFADRH:L + * GPIFTRIG EPxGPIFTRIG + * OUTPKTEND REVCTL + * GPIFTCB3 GPIFTCB2 + * GPIFTCB1 GPIFTCB0 + */ + +#define TRUE 1 +#define FALSE 0 + + +void init_usrp (void); +void init_gpif (void); + +void set_led_0 (unsigned char on); +void set_led_1 (unsigned char on); +void toggle_led_0 (void); +void toggle_led_1 (void); + +#define la_trace(v) + +#endif /* _USRPCOMMON_H_ */ diff --git a/firmware/fx2/common/usrp_config.h b/firmware/fx2/common/usrp_config.h new file mode 100644 index 000000000..e77f8e4c5 --- /dev/null +++ b/firmware/fx2/common/usrp_config.h @@ -0,0 +1,44 @@ +/* + * USRP - Universal Software Radio Peripheral + * + * Copyright (C) 2003 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA + */ + +/* + * configuration stuff for debugging + */ + +/* + * Define to 0 for normal use of port A, i.e., FPGA control bus. + * Define to 1 to write trace to port A for scoping with logic analyzer. + */ +#define UC_TRACE_USING_PORT_A 0 + + +/* + * Define to 0 for normal use of low 3 bits of port E, i.e., A/D, D/A SLEEP bits. + * Define to 1 to enable by default driving the GPIF state to the + * low three bits of port E. + */ +#define UC_START_WITH_GSTATE_OUTPUT_ENABLED 0 + + +/* + * Define to 1 for normal use (the board really has an FPGA on it). + * Define to 0 for debug use on board without FPGA. + */ +#define UC_BOARD_HAS_FPGA 1 diff --git a/firmware/fx2/common/usrp_globals.h b/firmware/fx2/common/usrp_globals.h new file mode 100644 index 000000000..445e9e6b4 --- /dev/null +++ b/firmware/fx2/common/usrp_globals.h @@ -0,0 +1,32 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef _USRP_GLOBALS_H_ +#define _USRP_GLOBALS_H_ + +extern unsigned char g_tx_enable; +extern unsigned char g_rx_enable; +extern unsigned char g_fpga_reset; +extern unsigned char g_rx_overrun; +extern unsigned char g_tx_underrun; + + +#endif /* _USRP_GLOBALS_H_ */ diff --git a/firmware/fx2/common/usrp_i2c_addr.h b/firmware/fx2/common/usrp_i2c_addr.h new file mode 100644 index 000000000..0a4f3ea59 --- /dev/null +++ b/firmware/fx2/common/usrp_i2c_addr.h @@ -0,0 +1,78 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ +#ifndef INCLUDED_USRP_I2C_ADDR_H +#define INCLUDED_USRP_I2C_ADDR_H + +// I2C addresses + +#define I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx + +#define I2C_ADDR_BOOT (I2C_DEV_EEPROM | 0x0) +#define I2C_ADDR_TX_A (I2C_DEV_EEPROM | 0x4) +#define I2C_ADDR_RX_A (I2C_DEV_EEPROM | 0x5) +#define I2C_ADDR_TX_B (I2C_DEV_EEPROM | 0x6) +#define I2C_ADDR_RX_B (I2C_DEV_EEPROM | 0x7) + + +// format of FX2 BOOT EEPROM +// 00: 0xC0 code for ``Read IDs from EEPROM'' +// 01: 0xFE USB Vendor ID (LSB) +// 02: 0xFF USB Vendor ID (MSB) +// 03: 0x02 USB Product ID (LSB) +// 04: 0x00 USB Product ID (MSB) +// 05: 0x01 USB Device ID (LSB) // rev1 +// 06: 0x00 USB Device ID (MSB) // 0 = unconfig'd (no firmware) +// 07: 0x00 option byte + + +// format of daughterboard EEPROM +// 00: 0xDB code for ``I'm a daughterboard'' +// 01: .. Daughterboard ID (LSB) +// 02: .. Daughterboard ID (MSB) +// 03: .. io bits 7-0 direction (bit set if it's an output from m'board) +// 04: .. io bits 15-8 direction (bit set if it's an output from m'board) +// 05: .. ADC0 DC offset correction (LSB) +// 06: .. ADC0 DC offset correction (MSB) +// 07: .. ADC1 DC offset correction (LSB) +// 08: .. ADC1 DC offset correction (MSB) +// ... +// 1f: .. negative of the sum of bytes [0x00, 0x1e] + +#define DB_EEPROM_MAGIC 0x00 +#define DB_EEPROM_MAGIC_VALUE 0xDB +#define DB_EEPROM_ID_LSB 0x01 +#define DB_EEPROM_ID_MSB 0x02 +#define DB_EEPROM_OE_LSB 0x03 +#define DB_EEPROM_OE_MSB 0x04 +#define DB_EEPROM_OFFSET_0_LSB 0x05 // offset correction for ADC or DAC 0 +#define DB_EEPROM_OFFSET_0_MSB 0x06 +#define DB_EEPROM_OFFSET_1_LSB 0x07 // offset correction for ADC or DAC 1 +#define DB_EEPROM_OFFSET_1_MSB 0x08 +#define DB_EEPROM_CHKSUM 0x1f + +#define DB_EEPROM_CLEN 0x20 // length of common portion of eeprom + +#define DB_EEPROM_CUSTOM_BASE DB_EEPROM_CLEN // first avail offset for + // daughterboard specific use + +#endif /* INCLUDED_USRP_I2C_ADDR_H */ + diff --git a/firmware/fx2/common/usrp_ids.h b/firmware/fx2/common/usrp_ids.h new file mode 100644 index 000000000..ffeb47f3c --- /dev/null +++ b/firmware/fx2/common/usrp_ids.h @@ -0,0 +1,68 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003,2006,2007 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +/* + * USB Vendor and Product IDs that we use + * + * (keep in sync with usb_descriptors.a51) + */ + +#ifndef _USRP_IDS_H_ +#define _USRP_IDS_H_ + +#define USB_VID_CYPRESS 0x04b4 +#define USB_PID_CYPRESS_FX2 0x8613 + + +#define USB_VID_FSF 0xfffe // Free Software Folks +#define USB_PID_FSF_EXP_0 0x0000 // Experimental 0 +#define USB_PID_FSF_EXP_1 0x0001 // Experimental 1 +#define USB_PID_FSF_USRP 0x0002 // Universal Software Radio Peripheral +#define USB_PID_FSF_USRP1P 0x0003 // USRP1P +#define USB_PID_FSF_SSRP 0x0004 // Simple Software Radio Peripheral +#define USB_PID_FSF_SSRP_reserved 0x0005 // Simple Software Radio Peripheral +#define USB_PID_FSF_HPSDR 0x0006 // High Performance Software Defined Radio (Internal Boot) +#define USB_PID_FSF_HPSDR_HA 0x0007 // High Performance Software Defined Radio (Host Assisted Boot) +#define USB_PID_FSF_QS1R 0x0008 // QS1R HF receiver +#define USB_PID_FSF_EZDOP 0x0009 // ezdop <jcorgan@aeinet.com> +#define USB_PID_FSF_BDALE_0 0x000a // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_BDALE_1 0x000b // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_BDALE_2 0x000c // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_BDALE_3 0x000d // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_BDALE_4 0x000e // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_BDALE_5 0x000f // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_BDALE_6 0x0010 // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_BDALE_7 0x0011 // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_BDALE_8 0x0012 // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_BDALE_9 0x0013 // Bdale Garbee <bdale@gag.com> +#define USB_PID_FSF_HPSDR_HERMES 0x0014 // HPSDR Hermes +#define USB_PID_FSF_THINKRF 0x0015 // Catalin Patulea <catalin.patulea@thinkrf.com> +#define USB_PID_FSF_MSA 0x0016 // Hans de Bok <hdbok@dionaea.demon.nl> Scotty's Modular Spectrum Analyzer + +#define USB_PID_FSF_LBNL_UXO 0x0018 // http://recycle.lbl.gov/~ldoolitt/uxo/ + + +#define USB_DID_USRP_0 0x0000 // unconfigured rev 0 USRP +#define USB_DID_USRP_1 0x0001 // unconfigured rev 1 USRP +#define USB_DID_USRP_2 0x0002 // unconfigured rev 2 USRP + +#endif /* _USRP_IDS_H_ */ diff --git a/firmware/fx2/common/usrp_interfaces.h b/firmware/fx2/common/usrp_interfaces.h new file mode 100644 index 000000000..8666e0490 --- /dev/null +++ b/firmware/fx2/common/usrp_interfaces.h @@ -0,0 +1,47 @@ +/* -*- c++ -*- */ +/* + * Copyright 2003 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _USRP_INTERFACES_H_ +#define _USRP_INTERFACES_H_ + +/* + * We've now split the USRP into 3 separate interfaces. + * + * Interface 0 contains only ep0 and is used for command and status. + * Interface 1 is the Tx path and it uses ep2 OUT BULK. + * Interface 2 is the Rx path and it uses ep6 IN BULK. + */ + +#define USRP_CMD_INTERFACE 0 +#define USRP_CMD_ALTINTERFACE 0 +#define USRP_CMD_ENDPOINT 0 + +#define USRP_TX_INTERFACE 1 +#define USRP_TX_ALTINTERFACE 0 +#define USRP_TX_ENDPOINT 2 // streaming data from host to FPGA + +#define USRP_RX_INTERFACE 2 +#define USRP_RX_ALTINTERFACE 0 +#define USRP_RX_ENDPOINT 6 // streaming data from FPGA to host + + +#endif /* _USRP_INTERFACES_H_ */ diff --git a/firmware/fx2/common/usrp_spi_defs.h b/firmware/fx2/common/usrp_spi_defs.h new file mode 100644 index 000000000..963463ef2 --- /dev/null +++ b/firmware/fx2/common/usrp_spi_defs.h @@ -0,0 +1,86 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#ifndef INCLUDED_USRP_SPI_DEFS_H +#define INCLUDED_USRP_SPI_DEFS_H + +/* + * defines for the VRQ_SPI_READ and VRQ_SPI_WRITE commands + * + * SPI == "Serial Port Interface". SPI is a 3 wire bus plus a + * separate enable for each peripheral. The common lines are SCLK, + * SDI and SDO. The FX2 always drives SCLK and SDI, the clock and + * data lines from the FX2 to the peripheral. When enabled, a + * peripheral may drive SDO, the data line from the peripheral to the + * FX2. + * + * The SPI_READ and SPI_WRITE commands are formatted identically. + * Each specifies which peripherals to enable, whether the bits should + * be transmistted Most Significant Bit first or Least Significant Bit + * first, the number of bytes in the optional header, and the number + * of bytes to read or write in the body. + * + * The body is limited to 64 bytes. The optional header may contain + * 0, 1 or 2 bytes. For an SPI_WRITE, the header bytes are + * transmitted to the peripheral followed by the the body bytes. For + * an SPI_READ, the header bytes are transmitted to the peripheral, + * then len bytes are read back from the peripheral. + */ + +/* + * SPI_FMT_* goes in wIndexL + */ +#define SPI_FMT_xSB_MASK (1 << 7) +# define SPI_FMT_LSB (1 << 7) // least signficant bit first +# define SPI_FMT_MSB (0 << 7) // most significant bit first +#define SPI_FMT_HDR_MASK (3 << 5) +# define SPI_FMT_HDR_0 (0 << 5) // 0 header bytes +# define SPI_FMT_HDR_1 (1 << 5) // 1 header byte +# define SPI_FMT_HDR_2 (2 << 5) // 2 header bytes + +/* + * SPI_ENABLE_* goes in wIndexH + * + * For the software interface, the enables are active high. + * For reads, it's an error to have more than one enable set. + * + * [FWIW, the hardware implements them as active low. Don't change the + * definitions of these. They are related to usrp_rev1_regs.h] + */ +#define SPI_ENABLE_FPGA 0x01 // select FPGA +#define SPI_ENABLE_CODEC_A 0x02 // select AD9862 A +#define SPI_ENABLE_CODEC_B 0x04 // select AD9862 B +#define SPI_ENABLE_reserved 0x08 +#define SPI_ENABLE_TX_A 0x10 // select d'board TX A +#define SPI_ENABLE_RX_A 0x20 // select d'board RX A +#define SPI_ENABLE_TX_B 0x40 // select d'board TX B +#define SPI_ENABLE_RX_B 0x80 // select d'board RX B + +/* + * If there's one header byte, it goes in wValueL. + * + * If there are two header bytes, they go in wValueH | wValueL. + * The transmit order of the bytes (and bits within them) is + * determined by SPI_FMT_*SB + */ + +#endif /* INCLUDED_USRP_SPI_DEFS_H */ diff --git a/firmware/fx2/common/vectors.a51 b/firmware/fx2/common/vectors.a51 new file mode 100644 index 000000000..4eec9fdbf --- /dev/null +++ b/firmware/fx2/common/vectors.a51 @@ -0,0 +1,179 @@ +;;; -*- asm -*- +;;; +;;; Copyright 2003 Free Software Foundation, Inc. +;;; +;;; This file is part of GNU Radio +;;; +;;; GNU Radio is free software; you can redistribute it and/or modify +;;; it under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3, or (at your option) +;;; any later version. +;;; +;;; GNU Radio is distributed in the hope that it will be useful, +;;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Radio; see the file COPYING. If not, write to +;;; the Free Software Foundation, Inc., 51 Franklin Street, +;;; Boston, MA 02110-1301, USA. +;;; + +;;; Interrupt vectors. + +;;; N.B. This object module must come first in the list of modules + + .module vectors + +;;; ---------------------------------------------------------------- +;;; standard FX2 interrupt vectors +;;; ---------------------------------------------------------------- + .area CSEG (CODE) + .area GSINIT (CODE) + .area CSEG (CODE) +__standard_interrupt_vector:: +__reset_vector:: + ljmp s_GSINIT + + ;; 13 8-byte entries. We point them all at __isr_nop + ljmp __isr_nop ; 3 bytes + .ds 5 ; + 5 = 8 bytes for vector slot + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + ljmp __isr_nop + .ds 5 + +__isr_nop:: + reti + +;;; ---------------------------------------------------------------- +;;; the FIFO/GPIF autovector. 14 4-byte entries. +;;; must start on a 128 byte boundary. +;;; ---------------------------------------------------------------- + + . = __reset_vector + 0x0080 + +__fifo_gpif_autovector:: + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + + +;;; ---------------------------------------------------------------- +;;; the USB autovector. 32 4-byte entries. +;;; must start on a 256 byte boundary. +;;; ---------------------------------------------------------------- + + . = __reset_vector + 0x0100 + +__usb_autovector:: + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop + ljmp __isr_nop + nop |