1 files changed, 105 insertions, 0 deletions
diff --git a/firmware/fx2/common/usrp_commands.h b/firmware/fx2/common/usrp_commands.h
new file mode 100644
index 000000000..2466729b2
--- /dev/null
+++ b/firmware/fx2/common/usrp_commands.h
@@ -0,0 +1,105 @@
+/* 
+ * USRP - Universal Software Radio Peripheral
+ *
+ * Copyright (C) 2003,2004 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _USRP_COMMANDS_H_
+#define _USRP_COMMANDS_H_
+
+#include <usrp_interfaces.h>
+#include <usrp_spi_defs.h>
+
+#define	MAX_EP0_PKTSIZE		       64	// max size of EP0 packet on FX2
+
+// ----------------------------------------------------------------
+//			Vendor bmRequestType's
+// ----------------------------------------------------------------
+
+#define	VRT_VENDOR_IN			0xC0
+#define	VRT_VENDOR_OUT			0x40
+
+// ----------------------------------------------------------------
+//			  USRP Vendor Requests
+//
+// Note that Cypress reserves [0xA0,0xAF].
+// 0xA0 is the firmware load function.
+// ----------------------------------------------------------------
+
+
+// IN commands
+
+#define	VRQ_GET_STATUS			0x80
+#define		GS_TX_UNDERRUN			0	// wIndexL	// returns 1 byte
+#define		GS_RX_OVERRUN			1	// wIndexL	// returns 1 byte
+
+#define	VRQ_I2C_READ			0x81		// wValueL: i2c address; length: how much to read
+
+#define	VRQ_SPI_READ			0x82		// wValue: optional header bytes
+							// wIndexH:	enables
+							// wIndexL:	format
+							// len: how much to read
+
+#define VRQ_FW_COMPAT 0x83 //low 16 bits
+
+// OUT commands
+
+#define	VRQ_SET_LED			0x01		// wValueL off/on {0,1}; wIndexL: which {0,1}
+
+#define	VRQ_FPGA_LOAD			0x02
+#  define	FL_BEGIN			0	// wIndexL: begin fpga programming cycle.  stalls if trouble.
+#  define	FL_XFER				1	// wIndexL: xfer up to 64 bytes of data
+#  define	FL_END				2	// wIndexL: end programming cycle, check for success.
+							//          stalls endpoint if trouble.
+
+#define	VRQ_FPGA_WRITE_REG		0x03		// wIndexL: regno; data: 32-bit regval MSB first
+#define	VRQ_FPGA_SET_RESET		0x04		// wValueL: {0,1}
+#define	VRQ_FPGA_SET_TX_ENABLE		0x05		// wValueL: {0,1}
+#define	VRQ_FPGA_SET_RX_ENABLE		0x06		// wValueL: {0,1}
+// see below VRQ_FPGA_SET_{TX,RX}_RESET
+
+#define	VRQ_SET_SLEEP_BITS		0x07		// wValueH: mask; wValueL: bits.  set bits given by mask to bits
+
+#  define	SLEEP_ADC0			0x01
+#  define	SLEEP_ADC1			0x02
+#  define	SLEEP_DAC0			0x04
+#  define	SLEEP_DAC1			0x08
+
+#define	VRQ_I2C_WRITE			0x08		// wValueL: i2c address; data: data
+
+#define	VRQ_SPI_WRITE			0x09		// wValue: optional header bytes
+							// wIndexH:	enables
+							// wIndexL:	format
+							// len: how much to write
+
+#define	VRQ_FPGA_SET_TX_RESET		0x0a		// wValueL: {0, 1}
+#define	VRQ_FPGA_SET_RX_RESET		0x0b		// wValueL: {0, 1}
+
+#define VRQ_RESET_GPIF			0x0c
+#define VRQ_ENABLE_GPIF			0x0d
+#define VRQ_CLEAR_FPGA_FIFO     0x0e
+
+
+// -------------------------------------------------------------------
+// we store the hashes at fixed addresses in the FX2 internal memory
+
+#define	  USRP_HASH_SLOT_0_ADDR			0xe1e0
+#define	  USRP_HASH_SLOT_1_ADDR			0xe1f0
+
+
+
+#endif /* _USRP_COMMANDS_H_ */