diff options
Diffstat (limited to 'firmware/fx2/b100/eeprom_io.c')
-rw-r--r-- | firmware/fx2/b100/eeprom_io.c | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/firmware/fx2/b100/eeprom_io.c b/firmware/fx2/b100/eeprom_io.c new file mode 100644 index 000000000..9eeb53636 --- /dev/null +++ b/firmware/fx2/b100/eeprom_io.c @@ -0,0 +1,65 @@ +/* -*- c++ -*- */ +/* + * Copyright 2006 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with GNU Radio; see the file COPYING. If not, write to + * the Free Software Foundation, Inc., 51 Franklin Street, + * Boston, MA 02110-1301, USA. + */ + +#include "eeprom_io.h" +#include "i2c.h" +#include "delay.h" + +// returns non-zero if successful, else 0 +unsigned char +eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset, + xdata unsigned char *buf, unsigned char len) +{ + // We setup a random read by first doing a "zero byte write". + // Writes carry an address. Reads use an implicit address. + + static xdata unsigned char cmd[1]; + cmd[0] = eeprom_offset; + if (!i2c_write(i2c_addr, cmd, 1)) + return 0; + + return i2c_read(i2c_addr, buf, len); +} + + +#if 0 + +// returns non-zero if successful, else 0 +unsigned char +eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset, + const xdata unsigned char *buf, unsigned char len) +{ + static xdata unsigned char cmd[2]; + unsigned char ok; + + while (len-- > 0){ + cmd[0] = eeprom_offset++; + cmd[1] = *buf++; + ok = i2c_write(i2c_addr, cmd, 2); + mdelay(10); // delay 10ms worst case write time + if (!ok) + return 0; + } + return 1; +} + +#endif |