diff options
Diffstat (limited to 'control_lib/ram_loader.v')
| -rw-r--r-- | control_lib/ram_loader.v | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/control_lib/ram_loader.v b/control_lib/ram_loader.v deleted file mode 100644 index cb67de739..000000000 --- a/control_lib/ram_loader.v +++ /dev/null @@ -1,225 +0,0 @@ - -// Adapted from VHDL code in spi_boot by Arnim Legauer -// Added a full wishbone master interface (32-bit) - -module ram_loader #(parameter AWIDTH=16, RAM_SIZE=16384) - (input clk_i, input rst_i, - // CPLD Interface - input cfg_clk_i, input cfg_data_i, - output start_o, output mode_o, output done_o, - input detached_i, - // Wishbone interface - output wire [31:0] wb_dat_o, - output reg [AWIDTH-1:0] wb_adr_o, - output wb_stb_o, - output wb_cyc_o, - output reg [3:0] wb_sel_o, - output reg wb_we_o, - input wb_ack_i, - output ram_loader_done_o); - - // FSM to control start signal, clocked on main clock - localparam FSM1_WAIT_DETACH = 2'b00; - localparam FSM1_CHECK_NO_DONE = 2'b01; - localparam FSM1_WAIT_DONE = 2'b10; - - reg [1:0] start_fsm_q, start_fsm_s; - reg start_q, enable_q, start_s, enable_s; - reg done_q, done_s; - - always @(posedge clk_i or posedge rst_i) - if(rst_i) - begin - start_fsm_q <= FSM1_WAIT_DETACH; - start_q <= 1'b0; - enable_q <= 1'b0; - end - else - begin - start_fsm_q <= start_fsm_s; - enable_q <= enable_s; - start_q <= start_s; - end // else: !if(rst_i) - - always @* - case(start_fsm_q) - FSM1_WAIT_DETACH: - if(detached_i == 1'b1) - begin - start_fsm_s <= FSM1_CHECK_NO_DONE; - enable_s <= 1'b1; - start_s <= 1'b1; - end - else - begin - start_fsm_s <= FSM1_WAIT_DETACH; - enable_s <= enable_q; - start_s <= start_q; - end // else: !if(detached_i == 1'b1) - FSM1_CHECK_NO_DONE: - if(~done_q) - begin - start_fsm_s <= FSM1_WAIT_DONE; - enable_s <= enable_q; - start_s <= start_q; - end - else - begin - start_fsm_s <= FSM1_CHECK_NO_DONE; - enable_s <= enable_q; - start_s <= start_q; - end // else: !if(~done_q) - FSM1_WAIT_DONE: - if(done_q) - begin - start_fsm_s <= FSM1_WAIT_DETACH; - enable_s <= 1'b0; - start_s <= 1'b0; - end - else - begin - start_fsm_s <= FSM1_WAIT_DONE; - enable_s <= enable_q; - start_s <= start_q; - end // else: !if(done_q) - default: - begin - start_fsm_s <= FSM1_WAIT_DETACH; - enable_s <= enable_q; - start_s <= start_q; - end // else: !if(done_q) - endcase // case(start_fsm_q) - - // FSM running on data clock - - localparam FSM2_IDLE = 3'b000; - localparam FSM2_WE_ON = 3'b001; - localparam FSM2_WE_OFF = 3'b010; - localparam FSM2_INC_ADDR1 = 3'b011; - localparam FSM2_INC_ADDR2 = 3'b100; - localparam FSM2_FINISHED = 3'b101; - - reg [AWIDTH-1:0] addr_q; - reg [7:0] shift_dat_q, ser_dat_q; - reg [2:0] bit_q, fsm_q, fsm_s; - reg bit_ovfl_q, ram_we_s, ram_we_q, mode_q, mode_s, inc_addr_s; - - always @(posedge cfg_clk_i or posedge rst_i) - if(rst_i) - begin - addr_q <= 0; - shift_dat_q <= 8'd0; - ser_dat_q <= 8'd0; - bit_q <= 3'd0; - bit_ovfl_q <= 1'b0; - fsm_q <= FSM2_IDLE; - ram_we_q <= 1'b0; - done_q <= 1'b0; - mode_q <= 1'b0; - end - else - begin - if(inc_addr_s) - addr_q <= addr_q + 1; - if(enable_q) - begin - bit_q <= bit_q + 1; - bit_ovfl_q <= (bit_q == 3'd7); - shift_dat_q[0] <= cfg_data_i; - shift_dat_q[7:1] <= shift_dat_q[6:0]; - end - if(bit_ovfl_q) - ser_dat_q <= shift_dat_q; - - fsm_q <= fsm_s; - - ram_we_q <= ram_we_s; - - if(done_s) - done_q <= 1'b1; - mode_q <= mode_s; - end // else: !if(rst_i) - - always @* - begin - inc_addr_s <= 1'b0; - ram_we_s <= 1'b0; - done_s <= 1'b0; - fsm_s <= FSM2_IDLE; - mode_s <= 1'b0; - - case(fsm_q) - FSM2_IDLE : - if(start_q) - if(bit_ovfl_q) - fsm_s <= FSM2_WE_ON; - FSM2_WE_ON: - begin - ram_we_s <= 1'b1; - fsm_s <= FSM2_WE_OFF; - end - FSM2_WE_OFF: - begin - ram_we_s <= 1'b1; - fsm_s <= FSM2_INC_ADDR1; - end - FSM2_INC_ADDR1: - fsm_s <= FSM2_INC_ADDR2; - FSM2_INC_ADDR2: - if(addr_q == (RAM_SIZE-1)) - //if(&addr_q) - begin - fsm_s <= FSM2_FINISHED; - done_s <= 1'b1; - mode_s <= 1'b1; - end - else - begin - inc_addr_s <= 1'b1; - fsm_s <= FSM2_IDLE; - end // else: !if(&addr_q) - FSM2_FINISHED: - begin - fsm_s <= FSM2_FINISHED; - mode_s <= 1'b1; - end - endcase // case(fsm_q) - end // always @ * - - assign start_o = start_q; - assign mode_o = mode_q; - assign done_o = start_q ? done_q : 1'b1; - wire [AWIDTH-1:0] ram_addr = addr_q; - wire [7:0] ram_data = ser_dat_q; - assign ram_loader_done_o = (fsm_q == FSM2_FINISHED); - - // wishbone master, only writes - reg [7:0] dat_holder; - assign wb_dat_o = {4{dat_holder}}; - assign wb_stb_o = wb_we_o; - assign wb_cyc_o = wb_we_o; - - always @(posedge clk_i or posedge rst_i) - if(rst_i) - begin - dat_holder <= 8'd0; - wb_adr_o <= 0; - wb_sel_o <= 4'b0000; - wb_we_o <= 1'b0; - end - else if(ram_we_q) - begin - dat_holder <= ram_data; - wb_adr_o <= ram_addr; - wb_we_o <= 1'b1; - case(ram_addr[1:0]) // Big Endian - 2'b00 : wb_sel_o <= 4'b1000; - 2'b01 : wb_sel_o <= 4'b0100; - 2'b10 : wb_sel_o <= 4'b0010; - 2'b11 : wb_sel_o <= 4'b0001; - endcase // case(ram_addr[1:0]) - end // if (ram_we_q) - else if(wb_ack_i) - wb_we_o <= 1'b0; - -endmodule // ram_loader |