diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 343 |
1 files changed, 343 insertions, 0 deletions
diff --git a/CHANGELOG b/CHANGELOG new file mode 100644 index 000000000..8965ae3b4 --- /dev/null +++ b/CHANGELOG @@ -0,0 +1,343 @@ +Change Log for Releases +============================== + +## 003.005.003 + +* E110: +** Fix FPGA Makefile build typo +* UHD: +** Fixed timespec irrational rate rounding +** Multichan streamer CPU utilization + +## 003.005.002 + +* B100: +** Fix get send buffer timeout +* E1x0: +** Changes to bus timings for S issue +* USRP1: +** Restore broken EEPROM writing + + +## 003.005.001 + +* Misc: +** Fixes to images downloader +** Fixes to C++ net burner +** Added sleep(1) to query_gpsdo_sensors +* OSX: +** Fix for socket send code newer OS versions +* Changes from 3.4.5 + +## 003.005.000 + +* B100: +** Added timed commands feature +** Incremented FPGA compat number to 11.1 +** Incremented firmware compat number to 3 +* E1x0: +** Added timed commands feature +** Incremented FPGA compat number to 11.1 +* USRP2/N2x0: +** Alternative stream destination on TX +** Incremented FPGA compat number to 10 +* N2x0: +** Implemented timed-commands feature +** Implemented fast-commands feature +* SBX/WBX +** Tune with phase sync using timed-commands +* RFX series +** Added calibration utilities support +* General: +** SSE2 conversions for sc8 RX samples +** Added multi-threading to packet converters +** Added automatic images fetcher application + +## 003.004.005 + +* XCVR2450: +** Added XCVR2450 rev2 support +* WBX: +** Added WBX rev4 support +* Misc: +** Fix to rx_samples_to_udp byte count +** stream command enums easy on SWIG + +## 003.004.004 + +* Gen2 +** Fix RX and TX DSP scalar adjustments +* B100/E1x0 +** Fixed RX ADC IQ inversion swap +** Incremented FPGA compat number to 9.4 + +## 003.004.003 + +* USRP2/N2x0: +** Net burner parser fix (windows) +* XCVR2450: +** Fix to disable automatic LO offset on TX +* N2x0: +** Deal with misc exceptions in net burner +* E1x0: +** Changes to add reliability to bus state machine +* USRP1: +** Shutoff the DAC on transmit EOB flags +** Revert 1st nyquist zone DAC calculation + +## 003.004.002 + +* USRP2/N2x0: +** Card and net burner language fixes +** Net burner python v3 code fix +** Net burner IPv6 interface fix +* E1x0: +** Fix for FPGA timing issue with GPMC input +** Incremented FPGA compat number to 9.2 +* B100: +** Fix USB wrapper/buffer release race condition +* USRP1: +** Fix DAC calculation for tune out of 1st nyquist zone +* General: +** Fix for recv packet handler time error check +** SIMD conversion routines priority over table look-up +** Fix undefined GCC float conversion behaviour for sc8 + +## 003.004.001 + +* USRP2/N2x0: +** Filter out invalid broadcast replies +** Incremented FPGA compat number to 9.1 +* E1x0: +** Incremented FPGA compat number to 9.1 +* B100: +** FPGA fixes for USB slave FIFO interface +** Incremented FPGA compat number to 9.3 +* USRP1: +** Stop thread in deconstructor for race condition +** Fixed DBSRX + USRP1 i2c lockup condition +* Gen2: +** Fix for unintentional clear in deprecated recv() call +** Fix RX DC offset call to handle negative values +* FreeBSD: +** Fixed network relay example compilation + +## 003.004.000 + +* USRP2/N2x0: +** 50 Msps RX/TX with sc8 mode over the wire +* B100: +** 16 Msps RX/TX with sc8 mode over the wire +* SBX/WBX: +** Added self-calibration utilities +* Gen2: +** Control RX/TX DC offset correction via API +** Control RX/TX IQ balance correction via API +** Incremented FPGA compat number to 9 +* USRP1: +** Support 16Msps RX with sc8 mode over the wire +** Control RX DC offset correction via API +* Misc: +** Multiple streamers/heterogeneous rates +** Alternative host and wire data types +** Added API calls for DC offset correction +** Added API calls for IQ balance correction + +## Release 003.003.002 + +* N2x0: +** Fixed TX daughterboard clocking mode +* B100: +** Tweaks for ordering of FPGA resets +* Misc: +** Device adder can parse empty values +** Updated syntax in udev rules file +** Corrections to images documentation +** Performance tweak for tx_waveforms example +** Handle EINTR on select() w/ udp transport +** Minor fixes for compiling on FreeBSD + +## Release 003.003.001 + +* B100/E1x0: +** Fixed VCO bounds checking on flexible clocking +* B100: +** Fixed discovery throwing when device claimed + +## Release 003.003.000 + +* USRP2/N2x0: +** Incremented firmware image compat number to 11.0 +** Re-implement internal GPSDO UART control +* E1x0: +** New GPMC/FPGA bus implementation +** Incremented FPGA compat number to 6 +** Incremented module compat number to 3 +** Added support for E110 +** Added support for E100r4 +* B100: +** Added support for B100 +* USRP1: +** Re-implement LibUSB data transport +* Misc: +** Normalise time_spec for negative fractional seconds +* Gen2: +** Fix DSP rate selection clipping for very low rates + +## Release 003.002.004 + +* USRP2/N2x0: +** Resize all socket buffers (multi-channel) +* N2x0: +** Gracefully handle missing GPSDO +* USRP1: +** Fix bug with order of deconstructors +** Fix zero length send padding on commit +* XCVR2450: +** Fix LO locking at marginal frequencies +* WBX: +** Fix TX gain readback value on v3 board +* Gen2: +** Fix bounds checking on stream num samps +** Fix error using PPS_NEG in clock config + +## Release 003.002.003 + +* USRP2/N2x0: +** Fix uninitialized variable for multi-board case +** Fix deconstructor throwing on device disconnect +** Incremented FPGA image compat number to 7.3 +* TVRX: +** Populated sensors property (fixed error in init) +* FPGA (gen2): +** Adjust RX DC offset correction time constant +** Restore calibration path in RX/TX frontend +* Misc: +** MB EEPROM burner workaround for compiler bugs +** Clip the reported tune range to the dboard bandwidth +** Preserve bands when calculating overall tune range + +## Release 003.002.002 + +* USRP2/N2x0: +** Always resize socket send buffer to SRAM size +** Incremented FPGA image compat number to 7.2 +** Incremented firmware image compat number to 10.4 +* N2x0: +** GPSDO control tweak for some Firefly devices +** Fix for erasure logic in rare bricking cases +* E100: +** Fix RX run state for GPIOs controlled by ATR +* USRP1: +** Fix for multi-channel streaming +** Fix to support 0 RX or 0 TX DSPs +* SBX: +** Corrected lower limit on frequency range +* FPGA (gen2): +** Reset CIC decimator on start of burst +* Misc: +** Fix send to return zero on empty packets +** Perform version check on liborc + +## Release 003.002.001 + +* USRP2/N-Series: +** Firmware fix to shutoff streaming when socket unreachable +** Incremented firmware image compat number to 10.3 + +## Release 003.002.000 + +* USRP2/N-Series: +** Incremented FPGA image compat number to 7.1 +** Incremented firmware image compat number to 10.2 +** Removed mimo_mode device addr argument +** Support for rev4 N2XX motherboards +* USRP-E100: +** Removed the need for clock recovery +** Incremented FPGA image compat number to 5 +** Incremented kernel module compat number to 2 +** Added support for dual receive DSPs +** Async messages independent from RX path +* WBX: +** Support for rev3 daughterboards +* DBSRX2: +** Rounding fix for LO tuning error +* Packet handler: +** Overall performance improvements +** Timestamps for packet fragments +** Overflow message on dropped packets +* Conversion: +** Optional liborc conversion support +** SSE2 conversion alignment performance +** SSE2 conversion for complex doubles +* Windows: +** Performance improvements for UDP send +* Misc: +** Code reorganization with property tree +** Calibration support in gen2 FPGAs + +## Release 003.001.002 + +* N-Series: +** Fix UART communication for GPSDO +* XCVR2450: +** Fix for descontructor throwing on hardware disconnect + +## Release 003.001.001 + +* USRP1: +** Fixed lock up in logging facility under MSVC +* USRP2/N-Series: +** Handle exceptions thrown in device locker loop +** Connected internal GPSDO PPS signal in FPGA +* WBX +** Keep mixers on between bursts to maintain phase offsets + +## Release 003.001.000 + +* USRP2/N-Series: +** Incremented FPGA compat number to 6 +** Incremented firmware compat number to 10 +** Created all-in-one bootloader for N-series +** Lock open devices per process +** USRP N-Series internal GPSDO Support +** Discovery works with out-of-date images +** Net and card burner: python 3.0 support +** Net burner: tkinter + windows thread fix +** Card burner: device selection validation +* USRP-E100: +** Incremented FPGA compat number to 4 +** FPGA VRT packet framer correct length +** Fix auxiliary ADC read back for AD9862 +** Sync TX and RX daughterbord clocks +** Fix daughterboard clock rates after re-clock event +* USRP1: +** Fix TX under remainder conditions +** Fixed RX multi-channel mapping +* Daughterboards: +** Added support for TVRX2 daughterboard +** Added support for SBX daughterboard +** Added support for WBX granddaughterboards +** Application notes for sensors and IF +* Windows: +** MinGW and Cygwin support (thanks Don) +** Fix calling convention on libusb callbacks +* Misc: +** Added logging and messaging facilities +** Deprecated API in utils/warning.hpp +** Fixed race condition in device discovery/factory + +## Release 003.000.001 + +* RFX400: fix for transmit capability +* USRP1: fix for axillary ADC read +* Windows: statically link libusb +* Windows: install dll into runtime path +* Linux: automatically set LIB_SUFFIX on rh-64 systems +* USRP-E100: fix - set FPGA tick rate on re-clock event +* build: various work on build system +* build: include FPGA and firmware images in installers + +## Release 003.000.000 + +Initial (formal) release, no changes to mention. |