13 files changed, 687 insertions, 9 deletions
diff --git a/host/CMakeLists.txt b/host/CMakeLists.txt
index 21a73565c..585a5e874 100644
--- a/host/CMakeLists.txt
+++ b/host/CMakeLists.txt
@@ -46,6 +46,7 @@ IF(NOT DEFINED PKG_LIB_DIR)
     SET(PKG_LIB_DIR ${PKG_DATA_DIR})
 ENDIF()
 SET(PKG_DOC_DIR share/doc/uhd)
+SET(PKG_MAN_DIR share/man/man1)
 
 ########################################################################
 # Local Include Dir
diff --git a/host/cmake/Modules/FindGZip.cmake b/host/cmake/Modules/FindGZip.cmake
new file mode 100644
index 000000000..05fe26b4c
--- /dev/null
+++ b/host/cmake/Modules/FindGZip.cmake
@@ -0,0 +1,21 @@
+#
+# Copyright 2013 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+########################################################################
+FIND_PROGRAM(GZIP_EXECUTABLE NAMES gzip)
+INCLUDE(FindPackageHandleStandardArgs)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(GZip DEFAULT_MSG GZIP_EXECUTABLE)
diff --git a/host/cmake/Modules/UHDPackage.cmake b/host/cmake/Modules/UHDPackage.cmake
index a535241a7..5e2303ff8 100644
--- a/host/cmake/Modules/UHDPackage.cmake
+++ b/host/cmake/Modules/UHDPackage.cmake
@@ -155,6 +155,10 @@ FOREACH(filename preinst postinst prerm postrm)
         ${CMAKE_BINARY_DIR}/debian/${filename}
     @ONLY)
 ENDFOREACH(filename)
+CONFIGURE_FILE(
+    ${CMAKE_SOURCE_DIR}/cmake/debian/watch
+    ${CMAKE_BINARY_DIR}/debian/watch
+@ONLY)
 
 ########################################################################
 # Setup CPack RPM
diff --git a/host/docs/CMakeLists.txt b/host/docs/CMakeLists.txt
index f56358ca9..3c49f8088 100644
--- a/host/docs/CMakeLists.txt
+++ b/host/docs/CMakeLists.txt
@@ -106,3 +106,49 @@ IF(ENABLE_DOXYGEN)
     ADD_CUSTOM_TARGET(doxygen_docs ALL DEPENDS ${CMAKE_CURRENT_BINARY_DIR_DOXYGEN})
     INSTALL(DIRECTORY ${CMAKE_CURRENT_BINARY_DIR_DOXYGEN} DESTINATION ${PKG_DOC_DIR} COMPONENT doxygen)
 ENDIF(ENABLE_DOXYGEN)
+
+########################################################################
+# List of man page sources
+########################################################################
+
+SET(man_page_sources
+    uhd_cal_rx_iq_balance.1
+    uhd_cal_tx_dc_offset.1
+    uhd_cal_tx_iq_balance.1
+    uhd_find_devices.1
+    uhd_images_downloader.1
+    uhd_usrp_probe.1
+    usrp_n2xx_simple_net_burner.1
+    usrp2_card_burner.1
+)
+
+########################################################################
+# Setup man pages
+########################################################################
+MESSAGE(STATUS "")
+FIND_PACKAGE(GZip)
+
+LIBUHD_REGISTER_COMPONENT("Man Pages" ENABLE_MAN_PAGES ON "GZIP_FOUND;LINUX" OFF)
+
+IF(ENABLE_MAN_PAGES)
+    #Generate man pages
+    FOREACH(manfile ${man_page_sources})
+        #make the gzip file depend on the text file
+        STRING(REPLACE ".1" "" PROGRAM_NAME "${manfile}")
+        SET(gzfile "${CMAKE_CURRENT_BINARY_DIR}/${manfile}.gz")
+        SET(manfile "${CMAKE_CURRENT_SOURCE_DIR}/${manfile}")
+        ADD_CUSTOM_COMMAND(
+            OUTPUT ${gzfile}
+            DEPENDS ${manfile}
+            COMMAND ${GZIP_EXECUTABLE} -cf ${manfile} > ${gzfile}
+            COMMENT "Generating ${PROGRAM_NAME} man page"
+        )
+
+        #make the man page target depend on the gz file
+        LIST(APPEND man_page_gz_files ${gzfile})
+        INSTALL(FILES ${gzfile} DESTINATION ${PKG_MAN_DIR} COMPONENT manpages)
+    ENDFOREACH(manfile ${man_page_sources})
+
+    #make the man pages a build-time dependency
+    ADD_CUSTOM_TARGET(man_page_gzips ALL DEPENDS ${man_page_gz_files})
+ENDIF(ENABLE_MAN_PAGES)
diff --git a/host/docs/uhd_cal_rx_iq_balance.1 b/host/docs/uhd_cal_rx_iq_balance.1
new file mode 100644
index 000000000..073d8ce63
--- /dev/null
+++ b/host/docs/uhd_cal_rx_iq_balance.1
@@ -0,0 +1,68 @@
+.TH "uhd_cal_rx_iq_balance" "1" "3.5.1" "UHD" "User Commands"
+.SH NAME
+uhd_cal_rx_iq_balance \- Generate RX IQ Balance Calibration Table for a UHD Device
+.SH DESCRIPTION
+The Universal Software Radio Peripheral Hardware Drivers handle calibration
+information. This application reduces RX IQ imbalance within the specified frequency
+range using transmit leakage into the receive path. Remove all external hardware
+from the RF antenna ports before using this application. This can take up to
+several minutes with default settings.
+.LP
+NOTE: This application can only be used with the WBX, SBX, XCVR2450, and RFX daughterboards.
+.SH OPTIONS
+.TP
+\fB\-\-help\fR
+help message
+.TP
+\fB\-\-verbose\fR
+enable some verbose
+.TP
+\fB\-\-args\fR arg
+device address args [default = ""]
+.TP
+\fB\-\-tx_wave_freq\fR arg (=507123)
+Transmit wave frequency in Hz
+.TP
+\fB\-\-tx_wave_ampl\fR arg (=0.69999999999999996)
+Transmit wave amplitude in counts
+.TP
+\fB\-\-tx_offset\fR arg (=934400)
+TX LO offset from the RX LO in Hz
+.TP
+\fB\-\-freq_start\fR arg
+Frequency start in Hz (will use beginning of frequency range if unspecified)
+.TP
+\fB\-\-freq_stop\fR arg
+Frequency stop in Hz (will use end of frequency range if unspecified)
+.TP
+\fB\-\-freq_step\fR arg (=7300000)
+Step size for LO sweep in Hz
+.TP
+\fB\-\-nsamps\fR arg (=10000)
+Samples per data capture
+.PP
+.SH SEE ALSO
+UHD documentation:
+.B http://files.ettus.com/uhd_docs/manual/html/index.html
+.LP
+GR-UHD documentation:
+.B http://gnuradio.org/doc/doxygen/page_uhd.html
+.LP
+Other UHD programs:
+.sp
+uhd_cal_tx_dc_offset(1) uhd_cal_tx_iq_balance(1)
+.SH AUTHOR
+This manual page was written by Maitland Bottoms and Nicholas Corgan
+for the Debian project (but may be used by others).
+.SH COPYRIGHT
+Copyright (c) 2012 Ettus Research LLC
+.LP
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+.LP
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
diff --git a/host/docs/uhd_cal_tx_dc_offset.1 b/host/docs/uhd_cal_tx_dc_offset.1
new file mode 100644
index 000000000..d64120242
--- /dev/null
+++ b/host/docs/uhd_cal_tx_dc_offset.1
@@ -0,0 +1,68 @@
+.TH "uhd_cal_tx_dc_offset" "1" "3.5.1" "UHD" "User Commands"
+.SH NAME
+uhd_cal_tx_dc_offset \- Generate TX DC Offset Calibration Table for a UHD Device
+.SH DESCRIPTION
+The Universal Software Radio Peripheral Hardware Drivers handle calibration
+information. This application reduces TX DC offset within the specified frequency
+range using transmit leakage into the receive path. Remove all external hardware
+from the RF antenna ports before using this application. This can take up to
+several minutes with default settings.
+.LP
+NOTE: This application can only be used with the WBX, SBX, XCVR2450, and RFX daughterboards.
+.SH OPTIONS
+.TP
+\fB\-\-help\fR
+help message
+.TP
+\fB\-\-verbose\fR
+enable some verbose
+.TP
+\fB\-\-args\fR arg
+device address args [default = ""]
+.TP
+\fB\-\-tx_wave_freq\fR arg (=507123)
+Transmit wave frequency in Hz
+.TP
+\fB\-\-tx_wave_ampl\fR arg (=0.69999999999999996)
+Transmit wave amplitude in counts
+.TP
+\fB\-\-rx_offset\fR arg (=934400)
+RX LO offset from the TX LO in Hz
+.TP
+\fB\-\-freq_start\fR arg
+Frequency start in Hz (will use beginning of frequency range if unspecified)
+.TP
+\fB\-\-freq_stop\fR arg
+Frequency stop in Hz (will use end of frequency range if unspecified)
+.TP
+\fB\-\-freq_step\fR arg (=7300000)
+Step size for LO sweep in Hz
+.TP
+\fB\-\-nsamps\fR arg (=10000)
+Samples per data capture
+.PP
+.SH SEE ALSO
+UHD documentation:
+.B http://files.ettus.com/uhd_docs/manual/html/index.html
+.LP
+GR-UHD documentation:
+.B http://gnuradio.org/doc/doxygen/page_uhd.html
+.LP
+Other UHD programs:
+.sp
+uhd_cal_rx_iq_balance(1) uhd_cal_tx_iq_balance(1)
+.SH AUTHOR
+This manual page was written by Maitland Bottoms and Nicholas Corgan
+for the Debian project (but may be used by others).
+.SH COPYRIGHT
+Copyright (c) 2012 Ettus Research LLC
+.LP
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+.LP
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
diff --git a/host/docs/uhd_cal_tx_iq_balance.1 b/host/docs/uhd_cal_tx_iq_balance.1
new file mode 100644
index 000000000..f4fdbd12f
--- /dev/null
+++ b/host/docs/uhd_cal_tx_iq_balance.1
@@ -0,0 +1,68 @@
+.TH "uhd_cal_tx_iq_balance" "1" "3.5.1" "UHD" "User Commands"
+.SH NAME
+uhd_cal_tx_iq_balance \- Generate TX IQ Balance Calibration Table for a UHD Device
+.SH DESCRIPTION
+The Universal Software Radio Peripheral Hardware Drivers handle calibration
+information. This application reduces TX IQ imbalance within the specified frequency
+range using transmit leakage into the receive path. Remove all external hardware
+from the RF antenna ports before using this application. This can take up to
+several minutes with default settings.
+.LP
+NOTE: This application can only be used with the WBX, SBX, XCVR2450, and RFX daughterboards.
+.SH OPTIONS
+.TP
+\fB\-\-help\fR
+help message
+.TP
+\fB\-\-verbose\fR
+enable some verbose
+.TP
+\fB\-\-args\fR arg
+device address args [default = ""]
+.TP
+\fB\-\-tx_wave_freq\fR arg (=507123)
+Transmit wave frequency in Hz
+.TP
+\fB\-\-tx_wave_ampl\fR arg (=0.69999999999999996)
+Transmit wave amplitude in counts
+.TP
+\fB\-\-rx_offset\fR arg (=934400)
+RX LO offset from the TX LO in Hz
+.TP
+\fB\-\-freq_start\fR arg
+Frequency start in Hz (will use beginning of frequency range if unspecified)
+.TP
+\fB\-\-freq_stop\fR arg
+Frequency stop in Hz (will use end of frequency range if unspecified)
+.TP
+\fB\-\-freq_step\fR arg (=7300000)
+Step size for LO sweep in Hz
+.TP
+\fB\-\-nsamps\fR arg (=10000)
+Samples per data capture
+.PP
+.SH SEE ALSO
+UHD documentation:
+.B http://files.ettus.com/uhd_docs/manual/html/index.html
+.LP
+GR-UHD documentation:
+.B http://gnuradio.org/doc/doxygen/page_uhd.html
+.LP
+Other UHD programs:
+.sp
+uhd_cal_tx_dc_offset(1) uhd_cal_rx_iq_balance(1)
+.SH AUTHOR
+This manual page was written by Maitland Bottoms and Nicholas Corgan
+for the Debian project (but may be used by others).
+.SH COPYRIGHT
+Copyright (c) 2012 Ettus Research LLC
+.LP
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+.LP
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
diff --git a/host/docs/uhd_find_devices.1 b/host/docs/uhd_find_devices.1
new file mode 100644
index 000000000..7dc0dd470
--- /dev/null
+++ b/host/docs/uhd_find_devices.1
@@ -0,0 +1,108 @@
+.TH "uhd_find_devices" 1 "3.5.1" UHD "User Commands"
+.SH NAME
+uhd_find_devices \- USRP Hardware Driver Discovery Utility
+.SH DESCRIPTION
+Find UHD-supporting Software Radio Peripherals attached by USB,
+network or embedded configuration.
+.LP
+The UHD package is the universal hardware driver for Ettus Research
+products. The goal is to provide a host driver and API for
+current and future Ettus Research products. Users will be able to use
+the UHD driver standalone or with 3rd party applications.
+.LP
+Hardware supporting UHD drivers includes the Universal Software Radio
+Peripheral, or USRP, available in several models.
+.SH SYNOPSIS
+.B  uhd_find_devices [OPTIONS]
+.SH OPTIONS
+.IP "Device Address Arguments:"
+--args \fIarg\fR
+.IP "This help information:"
+--help
+.SH IDENTIFYING USRP DEVICES
+.sp
+Devices are addressed through key/value string pairs.
+These string pairs can be used to narrow down the search for a specific device or group of devices.
+Most UHD utility applications and examples have a \-\-args parameter that takes a device address,
+where the device address is expressed as a delimited string.
+See the documentation in types/device_addr.hpp for reference.
+
+Every device has several ways of identifying it on the host system.
+.SS Identifying by hardware identifier
+.sp
+
+All USRP devices can be found through their hardware series identifier, which match to USRP
+devices as follows:
+
+Argument    |  Device
+
+type=usrp1  |  USRP1
+
+type=usrp2  |  USRP2, USRP N200, USRP N210
+
+type=b100   |  USRP B100
+
+type=e100   |  USRP E100, USRP E110
+
+.SS Identifying by serial number
+
+All USRP devices are given a unique serial number, which can be used to identify a device as follows:
+
+serial=12345678
+
+.SS Identifying by IP address
+
+USRP2, USRP N200, and USRP N210 devices connected to the host machine can all be found through their
+IP addresses, as follows:
+
+addr=192.168.10.2
+
+.SS Identifying by name
+
+Users have the option of giving their USRP devices short names using the usrp_burn_mb_eeprom utility
+in lib/uhd/utils. Devices that have been given a name can be identified as follows:
+
+name=foo
+
+.fi
+.SH EXAMPLES
+.SS Device discovery via command line
+.sp
+Device address arguments can be supplied to narrow the scope of the search.
+.sp
+.nf
+.ft C
+uhd_find_devices \-\-args="type=usrp1"
+
+\-\- OR \-\-
+
+uhd_find_devices \-\-args="serial=12345678"
+.ft P
+.fi
+.IP "Find all devices available to this system:"
+uhd_find_devices
+.SH SEE ALSO
+UHD documentation:
+.B http://files.ettus.com/uhd_docs/manual/html/index.html
+.LP
+GR-UHD documentation:
+.B http://gnuradio.org/doc/doxygen/page_uhd.html
+.LP
+Other UHD programs:
+.sp
+uhd_usrp_probe(1)
+.SH AUTHOR
+This manual page was written by Maitland Bottoms and Nicholas Corgan
+for the Debian project (but may be used by others).
+.SH COPYRIGHT
+Copyright (c) 2010 Ettus Research LLC
+.LP
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+.LP
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
diff --git a/host/docs/uhd_images_downloader.1 b/host/docs/uhd_images_downloader.1
new file mode 100644
index 000000000..ece826cb5
--- /dev/null
+++ b/host/docs/uhd_images_downloader.1
@@ -0,0 +1,54 @@
+.TH "uhd_images_downloader" 1 "3.5.1" UHD "User Commands"
+.SH NAME
+uhd_images_downloader \- USRP Hardware Driver firmware/FPGA downloader
+.SH DESCRIPTION
+The UHD package is the universal hardware driver for Ettus Research
+products. The goal of the UHD is to provide a host driver and API for
+current and future Ettus Research products. Users will be able to use
+the UHD driver standalone or with 3rd party applications.
+.LP
+Hardware supporting UHD drivers includes the Universal Software Radio
+Peripheral, or USRP, available in several models.
+.LP
+This program installs the firmware and FPGA binaries from Ettus Research
+matching this UHD driver release onto the host system. If the uhd-images
+package is installed, there is no need to run this installer.
+.SH SYNOPSIS
+.B uhd_images_downloader
+Usage: uhd_images_downloader.py [options]
+.SH OPTIONS
+This program works best without any arguments.
+.PP
+  -h, --help            show this help message and exit
+.PP
+  --download-location=DOWNLOAD_LOCATION
+                        Set custom download location for images,
+                        [default=/usr/share/uhd/images]
+.PP
+  --buffer-size=BUFFER_SIZE
+                        Set download buffer size, [default=8192]
+.SH SEE ALSO
+UHD documentation:
+.B http://files.ettus.com/uhd_docs/manual/html/index.html
+.LP
+GR-UHD documentation:
+.B http://gnuradio.org/doc/doxygen/page_uhd.html
+.LP
+Other UHD programs:
+.sp
+usrp2_card_burner(1) usrp_n2xx_simple_net_burner(1)
+.SH AUTHOR
+This manual page was written by Maitland Bottoms and Nicholas Corgan
+for the Debian project (but may be used by others).
+.SH COPYRIGHT
+Copyright (c) 2012 Ettus Research LLC
+.LP
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+.LP
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
diff --git a/host/docs/uhd_usrp_probe.1 b/host/docs/uhd_usrp_probe.1
new file mode 100644
index 000000000..7e82bf99a
--- /dev/null
+++ b/host/docs/uhd_usrp_probe.1
@@ -0,0 +1,114 @@
+.TH "uhd_usrp_probe" 1 "3.5.1" UHD "User Commands"
+.SH NAME
+uhd_usrp_probe \- Universal Hardware Driver Peripheral Report Utility
+.SH DESCRIPTION
+Report detailed information on UHD-supported Software Radio Peripherals
+attached by USB, network, or embedded configuration.
+.LP
+The UHD package is the universal hardware driver for Ettus Research products. The goal
+is to provide a host driver and API for current and future Ettus Research products.
+Users will be able to use the UHD driver standalone or with 3rd party applications.
+.LP
+Details include unit names, revision numbers, and available sensors on all attached
+USRP motherboards and daughterboards.
+.SH SYNOPSIS
+.B  uhd_usrp_probe [OPTIONS]
+.SH OPTIONS
+.IP "Device Address Arguments:"
+--args \fIarg\fR
+.IP "Print a complete property tree:"
+--tree
+.IP "Query a string value from the properties tree:"
+--string \fIarg\fR
+.IP "Print the version string and exit:"
+--version
+.IP "This help information:"
+--help
+.SH IDENTIFYING USRP DEVICES
+.sp
+Devices are addressed through key/value string pairs.
+These string pairs can be used to narrow down the search for a specific device or group of devices.
+Most UHD utility applications and examples have a \-\-args parameter that takes a device address,
+where the device address is expressed as a delimited string.
+See the documentation in types/device_addr.hpp for reference.
+
+Every device has several ways of identifying it on the host system.
+.SS Identifying by hardware identifier
+.sp
+
+All USRP devices can be found through their hardware series identifier, which match to USRP
+devices as follows:
+
+Argument    |  Device
+
+type=usrp1  |  USRP1
+
+type=usrp2  |  USRP2, USRP N200, USRP N210
+
+type=b100   |  USRP B100
+
+type=e100   |  USRP E100, USRP E110
+
+.SS Identifying by serial number
+
+All USRP devices are given a unique serial number, which can be used to identify a device as follows:
+
+serial=12345678
+
+.SS Identifying by IP address
+
+USRP2, USRP N200, and USRP N210 devices connected to the host machine can all be found through their
+IP addresses, as follows:
+
+addr=192.168.10.2
+
+.SS Identifying by name
+
+Users have the option of giving their USRP devices short names using the usrp_burn_mb_eeprom utility
+in lib/uhd/utils. Devices that have been given a name can be identified as follows:
+
+name=foo
+
+.fi
+.fi
+.SH EXAMPLES
+.SS Device discovery via command line
+.sp
+Device address arguments can be supplied to narrow the scope of the search.
+.sp
+.nf
+.ft C
+uhd_usrp_probe \-\-args="type=usrp1"
+
+\-\- OR \-\-
+
+uhd_usrp_probe \-\-args="serial=12345678"
+.ft P
+.fi
+.IP "Find all devices available to this system:"
+uhd_usrp_probe
+.SH SEE ALSO
+UHD documentation:
+.B http://files.ettus.com/uhd_docs/manual/html/index.html
+.LP
+GR-UHD documentation:
+.B http://gnuradio.org/doc/doxygen/page_uhd.html
+.LP
+Other UHD programs:
+.sp
+uhd_find_devices(1)
+.SH AUTHOR
+This manual page was written by Maitland Bottoms and Nicholas Corgan
+for the Debian project (but may be used by others).
+.SH COPYRIGHT
+Copyright (c) 2010 Ettus Research LLC
+.LP
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+.LP
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
diff --git a/host/docs/usrp2_card_burner.1 b/host/docs/usrp2_card_burner.1
new file mode 100644
index 000000000..d6a12b073
--- /dev/null
+++ b/host/docs/usrp2_card_burner.1
@@ -0,0 +1,52 @@
+.TH "usrp2_card_burner" 1 "3.5.1" UHD "User Commands"
+.SH NAME
+usrp2_card_burner - USRP N-Series FPGA/Firmware Burner
+.SH DESCRIPTION
+Burn USRP2 firmware and FPGA images onto an SD card plugged into
+the host machine.
+.SH SYNOPSIS
+.B  usrp2_card_burner [OPTIONS]
+.SH OPTIONS
+.IP "Raw device path:"
+--addr=\fI"Address"\fR (default: 192.168.10.2)
+.IP "This help information:"
+--help
+.IP "Firmware Filepath:"
+--fw=\fI"filepath"\fR
+.IP "FPGA Filepath:"
+--fpga=\fI"filepath"\fR
+.IP "List all USRP devices without burning"
+--list
+.IP "Override safety check"
+--force
+.SH EXAMPLES
+.SS Standard burning procedure
+.sp
+usrp2_card_burner --dev=/dev/sdd1 --fw=usrp2_fw.bin --fpga=usrp2_fpga.bin
+.ft
+.fi
+.SH SEE ALSO
+UHD documentation:
+.B http://files.ettus.com/uhd_docs/manual/html/index.html
+.LP
+GR-UHD documentation:
+.B http://gnuradio.org/doc/doxygen/page_uhd.html
+.LP
+Other UHD programs:
+.sp
+uhd_images_downloader(1) usrp_n2xx_simple_net_burner(1)
+.SH AUTHOR
+This manual page was written by Nicholas Corgan
+for the Debian project (but may be used by others).
+.SH COPYRIGHT
+Copyright (c) 2012 Ettus Research LLC
+.LP
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+.LP
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
diff --git a/host/docs/usrp_n2xx_simple_net_burner.1 b/host/docs/usrp_n2xx_simple_net_burner.1
new file mode 100644
index 000000000..6e8e38fae
--- /dev/null
+++ b/host/docs/usrp_n2xx_simple_net_burner.1
@@ -0,0 +1,59 @@
+.TH "usrp_n2xx_simple_net_burner" 1 "3.5.1" UHD "User Commands"
+.SH NAME
+usrp_n2xx_simple_net_burner - USRP N-Series FPGA/Firmware Burner
+.SH DESCRIPTION
+Burn firmware and FPGA images onto connected USRP N-Series devices. The
+program takes an IP address as an argument, queries the USRP device to
+identify which model and revision it is, and burns the appropriate images
+over Ethernet.
+.SH SYNOPSIS
+.B  usrp_n2xx_simple_net_burner [OPTIONS]
+.SH OPTIONS
+This program works best when only an IP address is specified.
+.IP "Device IP Address:"
+--addr=\fI"Address"\fR (default: 192.168.10.2)
+.IP "This help information:"
+--help
+.IP "Custom Firmware Filepath:"
+--fw=\fI"filepath"\fR
+.IP "Custom FPGA Filepath:"
+--fpga=\fI"filepath"\fR
+.IP "Don't burn firmware:"
+--no_fw
+.IP "Don't burn FPGA:"
+--no_fpga
+.IP "Automatically reboot USRP device after burning"
+--auto_reboot
+.IP "List all USRP devices without burning"
+--list
+.SH EXAMPLES
+.SS Selecting a USRP device with a non-standard IP address
+.sp
+usrp_n2xx_simple_net_burner --addr=192.168.10.3
+.ft
+.fi
+.SH SEE ALSO
+UHD documentation:
+.B http://files.ettus.com/uhd_docs/manual/html/index.html
+.LP
+GR-UHD documentation:
+.B http://gnuradio.org/doc/doxygen/page_uhd.html
+.LP
+Other UHD programs:
+.sp
+uhd_images_downloader(1) usrp2_card_burner(1)
+.SH AUTHOR
+This manual page was written by Nicholas Corgan
+for the Debian project (but may be used by others).
+.SH COPYRIGHT
+Copyright (c) 2012 Ettus Research LLC
+.LP
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 3 of the License, or
+(at your option) any later version.
+.LP
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
diff --git a/host/utils/CMakeLists.txt b/host/utils/CMakeLists.txt
index 6fc11d747..73be96016 100644
--- a/host/utils/CMakeLists.txt
+++ b/host/utils/CMakeLists.txt
@@ -24,6 +24,7 @@ SET(util_runtime_sources
     uhd_cal_rx_iq_balance.cpp
     uhd_cal_tx_dc_offset.cpp
     uhd_cal_tx_iq_balance.cpp
+    usrp_n2xx_simple_net_burner.cpp
 )
 
 #for each source: build an executable and install
@@ -41,7 +42,6 @@ SET(util_share_sources
     query_gpsdo_sensors.cpp
     usrp_burn_db_eeprom.cpp
     usrp_burn_mb_eeprom.cpp
-    usrp_n2xx_simple_net_burner.cpp
 )
 
 IF(ENABLE_USB)
@@ -66,6 +66,8 @@ FOREACH(util_source ${util_share_sources})
     INSTALL(TARGETS ${util_name} RUNTIME DESTINATION ${PKG_LIB_DIR}/utils COMPONENT utilities)
 ENDFOREACH(util_source)
 
+INSTALL(TARGETS usrp_n2xx_simple_net_burner RUNTIME DESTINATION ${PKG_LIB_DIR}/utils COMPONENT utilities)
+
 #UHD images downloader configuration
 CONFIGURE_FILE(
     ${CMAKE_CURRENT_SOURCE_DIR}/uhd_images_downloader.py.in
@@ -86,6 +88,13 @@ IF(LINUX)
 ENDIF(LINUX)
 
 IF(ENABLE_USRP2)
+    SET(burners
+        usrp2_card_burner.py
+        usrp2_card_burner_gui.py
+        usrp_n2xx_net_burner.py
+        usrp_n2xx_net_burner_gui.py
+    )
+
     IF(WIN32 AND UHD_RELEASE_MODE) #include dd.exe
         FILE(DOWNLOAD
             "http://files.ettus.com/dd.exe"
@@ -103,13 +112,19 @@ IF(ENABLE_USRP2)
             DESTINATION ${PKG_LIB_DIR}/utils
             COMPONENT utilities
         )
+        INSTALL(PROGRAMS
+            usrp2_card_burner.py
+            RENAME usrp2_card_burner
+            DESTINATION ${RUNTIME_DIR}
+            COMPONENT utilities
+        )
     ENDIF(LINUX)
-    INSTALL(PROGRAMS
-        usrp2_card_burner.py
-        usrp2_card_burner_gui.py
-        usrp_n2xx_net_burner.py
-        usrp_n2xx_net_burner_gui.py
-        DESTINATION ${PKG_LIB_DIR}/utils
-        COMPONENT utilities
-    )
+    FOREACH(burner ${burners})
+        INSTALL(PROGRAMS
+            ${burner}
+            DESTINATION ${PKG_LIB_DIR}/utils
+            COMPONENT utilities
+        )
+    ENDFOREACH(burner ${burners})
+
 ENDIF(ENABLE_USRP2)