diff options
| -rw-r--r-- | CHANGELOG | 121 | ||||
| -rw-r--r-- | host/cmake/Modules/UHDVersion.cmake | 4 |
2 files changed, 67 insertions, 58 deletions
@@ -2,77 +2,86 @@ Change Log for Releases ============================== ## 003.015.000.000 -* N320: Fix MCR initialization, fix checks for LO distribution board, reset RX - IQ balance on init, replace DRAM FIFO with replay block, improve constraints, - fix I/Q imbalance compensation -* N310: increase default dc offset averaging window, make tunes asynchronous, - add capability to control RF filter bypass and freq.band limits, fix setting - user DB EEPROM, correctly report N321 vs N320, improve DDR3 BIST, update max - revision to 7, fix DMA arbitration to use contiguous packets, replace DRAM - FIFO with replay block, fix SFP link up status +* N320: Fix MCR initialization, fix checks for LO distribution board, + reset RX IQ balance on init, replace DRAM FIFO with replay block, + improve constraints, fix I/Q imbalance compensation +* N310: increase default dc offset averaging window, make tunes + asynchronous, add capability to control RF filter bypass and freq.band + limits, fix setting user DB EEPROM, correctly report N321 vs N320, + improve DDR3 BIST, update max revision to 7, fix DMA arbitration to + use contiguous packets, replace DRAM FIFO with replay block, fix SFP + link up status, add workaround for clocking interference with external + reference clocks, disable gpsdo clock/time source options when + enable_gps=0 * X310: Fix max bitfile size, fix GPIO ATR property access type, heavily refactor, introduce conn_mgr, add DPDK support, add - capability to flash NI-2974 FPGA, fix clocking code, enable 11.52 MHz and - 23.04 MHz system ref rates, improve usage of constrained device args, enable - ADC gain through RFNoC API + capability to flash NI-2974 FPGA, fix clocking code, enable 11.52 MHz + and 23.04 MHz system ref rates, improve usage of constrained device + args, enable ADC gain through RFNoC API, add mode to set master clock + rate to arbitrary values between 184.32 and 200 MHz * E320: Fix time source clobbering ref source, add support for RevE, fix - reporting of FPGA version hash, fix SFP link up status, fix missing ce_clk - driver + reporting of FPGA version hash, fix SFP link up status, fix missing + ce_clk driver * E310: Convert to MPM architecture, fix uhd_image_loader usage, fix DMA - arbitration to use contiguous packets, reduced DMA chans to 4 (using data - stream muxing), fix DRAM_TEST target build -* B200: Add command to query bootloader status, fix sc12 streaming, fix FIFO - sizes on GPIFII interface + arbitration to use contiguous packets, reduced DMA chans to 4 (using + data stream muxing), fix DRAM_TEST target build +* B200: Add command to query bootloader status, fix sc12 streaming, fix + FIFO sizes on GPIFII interface * UBX: add temperature compensation mode * SBX: Only update ATRs when lock state changes -* TwinRX: add LO charge pump properties, increase default charge pump value on - LO1, add low spur tuning mode, fix duplicate write to N value in DDC -* RFNoC/device3: Read command FIFO size from device instead of hardcoding - values, fix multidevice graph connections, ENABLE_RFNOC now defaults to ON, - search all nodes for tick rate, add update_graph() call which lets blocks do - a graph-wide update of properties, fix missing port arg in SR_WRITE Noc-Script - call, constrain send/recv_frame_size baed on MTU, fix flushing on init/deinit, - disable FC ACKs for lossless links -* RFNOC/FPGA: Fix rb_stb in split stream block, fix off-by-one error in the - window block, fix phase reset and -accumulator for DDC and DUC blocks, fix - flushing on split-stream block, fix DC offset issue with DDS by using proper - rounding, fix DUC/DDC sample rate switching by latching N on M in - axi_rate_change, various fixes to uhd_image_builder, fix MTU settings in - blocks, align byte count to 8-byte word -* Python API: Replace Boost.Python with PyBind11, fix benchmark_rate statistics, - fix phase alignment test script -* UHD: Allow ignoring fallthrough warnings, reduce Boost footprint, remove gpsd - dependency, improve streaming, reduced the number of compiler warnings, - introduce pop() to the prop tree -* MPM/mpmd: Introduce compatible rev numbers to support future hardware, fix - some resource leaks in mpmd, fix spurious reclaims causing unnecessary - warnings, fix resource leaks in liberio xport, allow to mux data streams over - liberio transports (e.g. to require fewer DMA channels on E310), wait for DPDK - links to come up before proceeding, relax failure handling when updating - components (fixes spurious errors when updating FPGA images over SFP) -* FPGA: Use new device-tree overlay syntax, upgraded to Vivado 2018.3, broke - various paths with critical timing, allow SystemVerilog source files, improve - viv_modify_bd and viv_modify_tcl_bd, fix resets on 2clk FIFOs +* TwinRX: add LO charge pump properties, increase default charge pump + value on LO1, add low spur tuning mode, fix duplicate write to N value + in DDC +* RFNoC/device3: Read command FIFO size from device instead of + hardcoding values, fix multidevice graph connections, ENABLE_RFNOC now + defaults to ON, search all nodes for tick rate, add update_graph() + call which lets blocks do a graph-wide update of properties, fix + missing port arg in SR_WRITE Noc-Script call, constrain + send/recv_frame_size baed on MTU, fix flushing on init/deinit, disable + FC ACKs for lossless links +* RFNOC/FPGA: Fix rb_stb in split stream block, fix off-by-one error in + the window block, fix phase reset and -accumulator for DDC and DUC + blocks, fix flushing on split-stream block, fix DC offset issue with + DDS by using proper rounding, fix DUC/DDC sample rate switching by + latching N on M in axi_rate_change, various fixes to + uhd_image_builder, fix MTU settings in blocks, align byte count to + 8-byte word +* Python API: Replace Boost.Python with PyBind11, fix benchmark_rate + statistics, fix phase alignment test script +* UHD: Allow ignoring fallthrough warnings, reduce Boost footprint, + remove gpsd dependency, improve streaming, reduced the number of + compiler warnings, introduce pop() to the prop tree +* MPM/mpmd: Introduce compatible rev numbers to support future hardware, + fix some resource leaks in mpmd, fix spurious reclaims causing + unnecessary warnings, fix resource leaks in liberio xport, allow to + mux data streams over liberio transports (e.g. to require fewer DMA + channels on E310), wait for DPDK links to come up before proceeding, + relax failure handling when updating components (fixes spurious errors + when updating FPGA images over SFP) +* FPGA: Use new device-tree overlay syntax, upgraded to Vivado 2018.3, + broke various paths with critical timing, allow SystemVerilog source + files, improve viv_modify_bd and viv_modify_tcl_bd, fix resets on 2clk + FIFOs * USB: Allow cancelled USB requests to occur * Logging: Always honour log level, don't log colours for non-ttys, fix - includes, demote various log messages, fix logging colours, fix deadlock on - Windows machines -* Examples: Fix benchmark_rate INIT_DELAY, fix memory leak in tx_samples_c -* Tests: Make the Python interpreter for devtests a parameter, add unit tests to - MPM + includes, demote various log messages, fix logging colours, fix + deadlock on Windows machines +* Examples: Fix benchmark_rate INIT_DELAY, fix memory leak in + tx_samples_c +* Tests: Make the Python interpreter for devtests a parameter, add unit + tests to MPM * Utilities: Fix converter benchmark for Py3k and scaling issue * Tools: Fix kitchen_sink * Docs: Various fixes, fix Doxygen warnings, fix links to KB * C API: Add uhd_get_abi_string, uhd_get_version_string -* CMake: Make manpage compression optional, allow setting of PKG_DOC_DIR from - the CMake commandline, add replay example, fix missing 'project', replace - ENABLE_PYTHON3 with a simpler Python detection, clean up superfluous modules, - improve log statements, bump dependency min versions, add MPM unit testing, - fix missing BIGOBJ for MSVC +* CMake: Make manpage compression optional, allow setting of PKG_DOC_DIR + from the CMake commandline, add replay example, fix missing 'project', + replace ENABLE_PYTHON3 with a simpler Python detection, clean up + superfluous modules, improve log statements, bump dependency min + versions, add MPM unit testing, fix missing BIGOBJ for MSVC * Formatting: Apply clang-format to all files, break after template<> - ## 003.014.001.000 N320: Terminate the DAC when not transmitting E320: Add support for rev E diff --git a/host/cmake/Modules/UHDVersion.cmake b/host/cmake/Modules/UHDVersion.cmake index 35185d9b0..205c2e839 100644 --- a/host/cmake/Modules/UHDVersion.cmake +++ b/host/cmake/Modules/UHDVersion.cmake @@ -20,8 +20,8 @@ find_package(Git QUIET) set(UHD_VERSION_MAJOR 3) set(UHD_VERSION_API 15) set(UHD_VERSION_ABI 0) -set(UHD_VERSION_PATCH git) -set(UHD_VERSION_DEVEL TRUE) +set(UHD_VERSION_PATCH 0) +set(UHD_VERSION_DEVEL FALSE) ######################################################################## # If we're on a development branch, we skip the patch version |