diff options
185 files changed, 3037 insertions, 4489 deletions
diff --git a/firmware/zpu/apps/txrx_uhd.c b/firmware/zpu/apps/txrx_uhd.c index 4ccb585e2..68c24e872 100644 --- a/firmware/zpu/apps/txrx_uhd.c +++ b/firmware/zpu/apps/txrx_uhd.c @@ -53,20 +53,34 @@ static void setup_network(void); // the fast-path setup global variables // ---------------------------------------------------------------- static eth_mac_addr_t fp_mac_addr_src, fp_mac_addr_dst; -extern struct socket_address fp_socket_src, fp_socket_dst; +struct socket_address fp_socket_src, fp_socket_dst; +extern uint16_t dsp0_dst_port, err0_dst_port, dsp1_dst_port; static void handle_udp_err0_packet( struct socket_address src, struct socket_address dst, unsigned char *payload, int payload_len ){ sr_udp_sm->err0_port = (((uint32_t)dst.port) << 16) | src.port; + err0_dst_port = src.port; printf("Storing for async error path:\n"); printf(" source udp port: %d\n", dst.port); printf(" destination udp port: %d\n", src.port); newline(); } -static void handle_udp_data_packet( +static void handle_udp_dsp1_packet( + struct socket_address src, struct socket_address dst, + unsigned char *payload, int payload_len +){ + sr_udp_sm->dsp1_port = (((uint32_t)dst.port) << 16) | src.port; + dsp1_dst_port = src.port; + printf("Storing for dsp1 path:\n"); + printf(" source udp port: %d\n", dst.port); + printf(" destination udp port: %d\n", src.port); + newline(); +} + +static void handle_udp_dsp0_packet( struct socket_address src, struct socket_address dst, unsigned char *payload, int payload_len ){ @@ -75,7 +89,8 @@ static void handle_udp_data_packet( fp_socket_src = dst; fp_socket_dst = src; sr_udp_sm->dsp0_port = (((uint32_t)dst.port) << 16) | src.port; - printf("Storing for fast path:\n"); + dsp0_dst_port = src.port; + printf("Storing for dsp0 path:\n"); printf(" source mac addr: "); print_mac_addr(&fp_mac_addr_src); newline(); printf(" source ip addr: "); @@ -188,10 +203,7 @@ static void handle_udp_ctrl_packet( * Peek and Poke Register ******************************************************************/ case USRP2_CTRL_ID_POKE_THIS_REGISTER_FOR_ME_BRO: - if (0){//ctrl_data_in->data.poke_args.addr < 0xC000){ - printf("error! tried to poke into 0x%x\n", ctrl_data_in->data.poke_args.addr); - } - else switch(ctrl_data_in->data.poke_args.num_bytes){ + switch(ctrl_data_in->data.poke_args.num_bytes){ case sizeof(uint32_t): *((uint32_t *) ctrl_data_in->data.poke_args.addr) = (uint32_t)ctrl_data_in->data.poke_args.data; break; @@ -226,6 +238,9 @@ static void handle_udp_ctrl_packet( ctrl_data_out.id = USRP2_CTRL_ID_WOAH_I_DEFINITELY_PEEKED_IT_DUDE; break; + /******************************************************************* + * UART Control + ******************************************************************/ case USRP2_CTRL_ID_SO_LIKE_CAN_YOU_READ_THIS_UART_BRO:{ //executes a readline()-style read, up to num_bytes long, up to and including newline int num_bytes = ctrl_data_in->data.uart_args.bytes; @@ -248,6 +263,15 @@ static void handle_udp_ctrl_packet( break; } + /******************************************************************* + * Echo test + ******************************************************************/ + case USRP2_CTRL_ID_HOLLER_AT_ME_BRO: + ctrl_data_out.data.echo_args.len = payload_len; + ctrl_data_out.id = USRP2_CTRL_ID_HOLLER_BACK_DUDE; + send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, ctrl_data_in->data.echo_args.len); + return; + default: ctrl_data_out.id = USRP2_CTRL_ID_HUH_WHAT; } @@ -341,13 +365,14 @@ main(void) //1) register the addresses into the network stack register_addrs(ethernet_mac_addr(), get_ip_addr()); - pkt_ctrl_program_inspector(get_ip_addr(), USRP2_UDP_DATA_PORT); + pkt_ctrl_program_inspector(get_ip_addr(), USRP2_UDP_DSP0_PORT); //2) register callbacks for udp ports we service init_udp_listeners(); register_udp_listener(USRP2_UDP_CTRL_PORT, handle_udp_ctrl_packet); - register_udp_listener(USRP2_UDP_DATA_PORT, handle_udp_data_packet); + register_udp_listener(USRP2_UDP_DSP0_PORT, handle_udp_dsp0_packet); register_udp_listener(USRP2_UDP_ERR0_PORT, handle_udp_err0_packet); + register_udp_listener(USRP2_UDP_DSP1_PORT, handle_udp_dsp1_packet); #ifdef USRP2P register_udp_listener(USRP2_UDP_UPDATE_PORT, handle_udp_fw_update_packet); #endif diff --git a/firmware/zpu/lib/clock_bits.h b/firmware/zpu/lib/clock_bits.h deleted file mode 100644 index d2052e941..000000000 --- a/firmware/zpu/lib/clock_bits.h +++ /dev/null @@ -1,55 +0,0 @@ -// -// Copyright 2010 Ettus Research LLC -// -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ -#ifndef INCLUDED_USRP2_CLOCK_BITS_H -#define INCLUDED_USRP2_CLOCK_BITS_H - -#define _MC_WE_LOCK 0x0001 -#define _MC_MIMO_CLK_INPUT 0x0002 // else SMA input - -/* - * Derived masks (use these): - * - * We get our input from 1 of three places: - * Our free running oscilator, our SMA connector, or from the MIMO connector - */ -#define MC_WE_DONT_LOCK 0x0000 -#define MC_WE_LOCK_TO_SMA (_MC_WE_LOCK | 0) -#define MC_WE_LOCK_TO_MIMO (_MC_WE_LOCK | _MC_MIMO_CLK_INPUT) - -/* - * Independent of the source of the clock, we may or may not drive our - * clock onto the mimo connector. Note that there are dedicated clock - * signals in each direction, so disaster doesn't occurs if we're - * unnecessarily providing clock. - */ -#define MC_PROVIDE_CLK_TO_MIMO 0x0004 - -#define MC_REF_CLK_MASK 0x0f - -#define MC_PPS_SOURCE_SMA (0x00 << 4) -#define MC_PPS_SOURCE_MIMO (0x01 << 4) - -#define MC_PPS_POLARITY_NEG (0x00 << 5) -#define MC_PPS_POLARITY_POS (0x01 << 5) - -#endif /* INCLUDED_USRP2_CLOCK_BITS_H */ diff --git a/firmware/zpu/lib/clocks.c b/firmware/zpu/lib/clocks.c index 2b352a385..c1e8ce827 100644 --- a/firmware/zpu/lib/clocks.c +++ b/firmware/zpu/lib/clocks.c @@ -1,4 +1,6 @@ -/* -*- c++ -*- */ +// +// Copyright 2010-2011 Ettus Research LLC +// /* * Copyright 2008 Free Software Foundation, Inc. * @@ -16,119 +18,39 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif #include <clocks.h> - +#include <stdbool.h> #include "memory_map.h" #include "ad9510.h" #include "spi.h" -#include "u2_init.h" -//USRP2PLUS clocks: -//Clock 0: testclk -//Clock 1: FPGA clk -//Clock 2: ADC clk -//Clock 3: DAC clk -//Clock 4: SER clk -//Clock 5: TX dboard clk -//Clock 6: EXP clk -//Clock 7: RX dboard clk +/*! + * \brief Lock Detect -- Return True if our PLL is locked + */ +bool clocks_lock_detect(); -//TODO: should have enough brains to init the FPGA clock for USRP2+. all others are suspect. -//note that without EEPROM support u2_hw_rev_major is going to be incorrect. +/*! + * \brief Enable or disable fpga clock. Disabling would wedge and require a power cycle. + */ +void clocks_enable_fpga_clk(bool enable, int divisor); void clocks_init(void) { // Set up basic clocking functions in AD9510 - ad9510_write_reg(0x45, 0x01); // CLK2 drives distribution + ad9510_write_reg(0x45, 0x01); //enable the 100MHz clock output to the FPGA for 50MHz CPU clock clocks_enable_fpga_clk(true, 1); spi_wait(); - // Set up PLL for 10 MHz reference - // Reg 4, A counter, Don't Care -// ad9510_write_reg(0x05, 0x00); // Reg 5, B counter MSBs, 0 -// ad9510_write_reg(0x06, 0x05); // Reg 6, B counter LSBs, 5 - // Reg 7, Loss of reference detect, doesn't work yet, 0 -// ad9510_write_reg(0x5A, 0x01); // Update Regs - - // Primary clock configuration -// clocks_mimo_config(MC_WE_DONT_LOCK); - - //wait for the clock to stabilize while(!clocks_lock_detect()); //issue a reset to the DCM so it locks up to the new freq output_regs->clk_ctrl |= CLK_RESET; - - // Set up other clocks - //clocks_enable_test_clk(false, 0); - //clocks_enable_tx_dboard(false, 0); - //clocks_enable_rx_dboard(false, 0); -// clocks_enable_eth_phyclk(false, 0); //PHY clk is separate now (u2r4, u2p) - - // Enable clock to ADCs and DACs - //clocks_enable_dac_clk(true, 1); - //clocks_enable_adc_clk(true, 1); -} - -/* -void -clocks_mimo_config(int flags) -{ - if (flags & _MC_WE_LOCK){ - // Reg 8, Charge pump on, dig lock det, positive PFD, 47 - ad9510_write_reg(0x08, 0x47); - } - else { - // Reg 8, Charge pump off, dig lock det, positive PFD - ad9510_write_reg(0x08, 0x00); - } - - // Reg 9, Charge pump current, 0x40=3mA, 0x00=650uA - ad9510_write_reg(0x09, 0x00); - // Reg A, Prescaler of 2, everything normal 04 - ad9510_write_reg(0x0A, 0x04); - // Reg B, R Div MSBs, 0 - ad9510_write_reg(0x0B, 0x00); - // Reg C, R Div LSBs, 1 - ad9510_write_reg(0x0C, 0x01); - // Reg D, Antibacklash, Digital lock det, 0 - - ad9510_write_reg(0x5A, 0x01); // Update Regs - - spi_wait(); - - // Allow for clock switchover - // The below masks include 0x10, which issues a reset to the DCM. - if (flags & _MC_WE_LOCK){ // WE LOCK - if (flags & _MC_MIMO_CLK_INPUT) { - // Turn on ref output and choose the MIMO connector - output_regs->clk_ctrl = 0x15; - } - else { - // turn on ref output and choose the SMA - output_regs->clk_ctrl = 0x1C; - } - } - else { // WE DONT LOCK - // Disable both ext clk inputs - output_regs->clk_ctrl = 0x10; - } - - // Do we drive a clock onto the MIMO connector? -// if (flags & MC_PROVIDE_CLK_TO_MIMO) -// clocks_enable_clkexp_out(true,10); -// else -// clocks_enable_clkexp_out(false,0); } -*/ bool clocks_lock_detect() @@ -188,79 +110,9 @@ clocks_enable_XXX_clk(bool enable, int divisor, int reg_en, int reg_div, int mod ad9510_write_reg(0x5A, 0x01); // Update Regs } -// Clock 0 -/*void -clocks_enable_test_clk(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x3C,0x48,CLOCK_MODE_PECL); -}*/ - // Clock 1 void clocks_enable_fpga_clk(bool enable, int divisor) { clocks_enable_XXX_clk(enable,divisor,0x3D,0x4A,CLOCK_MODE_PECL); } -/* -// Clock 2 on Rev 3, Clock 5 on Rev 4, Clock 6 on USRP2+ -void -clocks_enable_clkexp_out(bool enable, int divisor) -{ - if(u2_hw_rev_major == 3) - clocks_enable_XXX_clk(enable,divisor,0x3E,0x4C,CLOCK_MODE_PECL); - else if(u2_hw_rev_major == 4) { - ad9510_write_reg(0x34,0x00); // Turn on fine delay - ad9510_write_reg(0x35,0x00); // Set Full Scale to nearly 10ns - ad9510_write_reg(0x36,0x1c); // Set fine delay. 0x20 is midscale - clocks_enable_XXX_clk(enable,divisor,0x41,0x52,CLOCK_MODE_LVDS); - } - else if(u2_hw_rev_major == 10) { - ad9510_write_reg(0x34, 0x00); - ad9510_write_reg(0x35, 0x00); - ad9510_write_reg(0x36, 0x1C); - clocks_enable_XXX_clk(enable, divisor, 0x42, 0x52, CLOCK_MODE_LVDS); - } - else - putstr("ERR (clocks_enable_clkexp_out): Invalid hw rev, don't know what to do!\n"); -} -*/ -/* -// Clock 5 on Rev 3, none (was 2) on Rev 4, none on USRP2+ -void -clocks_enable_eth_phyclk(bool enable, int divisor) -{ - if(u2_hw_rev_major == 3) - clocks_enable_XXX_clk(enable,divisor,0x41,0x52,CLOCK_MODE_LVDS); - else if(u2_hw_rev_major == 4) - clocks_enable_XXX_clk(enable,divisor,0x3E,0x4C,CLOCK_MODE_PECL); - else - putstr("(clocks_enable_eth_phyclk): no eth PHY clock or invalid hw rev\n"); //not really an error -} -*/ -// Clock 3 -/*void -clocks_enable_dac_clk(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x3F,0x4E,CLOCK_MODE_PECL); -}*/ - -// Clock 4 -/*void -clocks_enable_adc_clk(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x40,0x50,CLOCK_MODE_LVDS); -}*/ - -// Clock 6 -/*void -clocks_enable_tx_dboard(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x42,0x54,CLOCK_MODE_CMOS); -}*/ - -// Clock 7 -/*void -clocks_enable_rx_dboard(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x43,0x56,CLOCK_MODE_CMOS); -}*/ diff --git a/firmware/zpu/lib/clocks.h b/firmware/zpu/lib/clocks.h index 28d1d542f..7bc7a3cda 100644 --- a/firmware/zpu/lib/clocks.h +++ b/firmware/zpu/lib/clocks.h @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // /* * Copyright 2008 Free Software Foundation, Inc. @@ -21,75 +21,10 @@ #ifndef INCLUDED_CLOCKS_H #define INCLUDED_CLOCKS_H -/* - * Routines to configure our multitude of clocks - */ - -#include <stdbool.h> -#include "clock_bits.h" - - /*! - * One time call to initialize all clocks to a reasonable state. We - * come out of here using our free running 100MHz oscilator and not - * providing a clock to the MIMO connector (CMC_WE_DONT_LOCK) + * One time call to initialize the master clock to a reasonable state. + * We come out of here using our free running 100MHz oscillator. */ void clocks_init(void); - -/*! - * \brief MIMO clock configuration. - * - * Configure our master clock source, and whether or not we drive a - * clock onto the mimo connector. See MC_flags in usrp2_mimo_config.h. - */ -//void clocks_mimo_config(int flags); - -/*! - * \brief Lock Detect -- Return True if our PLL is locked - */ -bool clocks_lock_detect(); - -/*! - * \brief Enable or disable test clock (extra clock signal) - */ -//void clocks_enable_test_clk(bool enable, int divisor); - -/*! - * \brief Enable or disable fpga clock. Disabling would wedge and require a power cycle. - */ -void clocks_enable_fpga_clk(bool enable, int divisor); - -/*! - * \brief Enable or disable clock output sent to MIMO connector - */ -//void clocks_enable_clkexp_out(bool enable, int divisor); - -/*! - * \brief Enable or disable ethernet phyclk, should always be disabled - */ -//void clocks_enable_eth_phyclk(bool enable, int divisor); - -/*! - * \brief Enable or disable clock to DAC - */ -//void clocks_enable_dac_clk(bool enable, int divisor); - -/*! - * \brief Enable or disable clock to ADC - */ -//void clocks_enable_adc_clk(bool enable, int divisor); - -/*! - * \brief Enable or disable clock to Rx daughterboard - */ -//void clocks_enable_rx_dboard(bool enable, int divisor); - - -/*! - * \brief Enable or disable clock to Tx daughterboard - */ -//void clocks_enable_tx_dboard(bool enable, int divisor); - - #endif /* INCLUDED_CLOCKS_H */ diff --git a/firmware/zpu/lib/net_common.c b/firmware/zpu/lib/net_common.c index d1b06976d..f70f279ac 100644 --- a/firmware/zpu/lib/net_common.c +++ b/firmware/zpu/lib/net_common.c @@ -1,6 +1,5 @@ -/* -*- c -*- */ /* - * Copyright 2009,2010 Ettus Research LLC + * Copyright 2009-2011 Ettus Research LLC * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -39,10 +38,12 @@ static const bool debug = false; +static const size_t out_buff_size = 2048; + static const eth_mac_addr_t BCAST_MAC_ADDR = {{0xff, 0xff, 0xff, 0xff, 0xff, 0xff}}; //used in the top level application... -struct socket_address fp_socket_src, fp_socket_dst; +uint16_t dsp0_dst_port, err0_dst_port, dsp1_dst_port; // ------------------------------------------------------------------------ @@ -119,58 +120,48 @@ register_udp_listener(int port, udp_receiver_t rcvr) * \param len2 length of third part of data */ static void -send_pkt(eth_mac_addr_t dst, int ethertype, - const void *buf0, size_t len0, - const void *buf1, size_t len1, - const void *buf2, size_t len2) -{ - - // Assemble the header - padded_eth_hdr_t ehdr; - ehdr.pad = 0; - ehdr.dst = dst; - ehdr.src = _local_mac_addr; - ehdr.ethertype = ethertype; - - uint32_t *buff = (uint32_t *)pkt_ctrl_claim_outgoing_buffer(); - - // Copy the pieces into the buffer - uint32_t *p = buff; - *p++ = 0x0; // slow path - memcpy_wa(p, &ehdr, sizeof(ehdr)); // 4 lines - p += sizeof(ehdr)/sizeof(uint32_t); - - - // FIXME modify memcpy_wa to do read/modify/write if reqd - - if (len0 && ((len0 & 0x3) || (intptr_t) buf0 & 0x3)) - printf("send_pkt: bad alignment of len0 and/or buf0\n"); - - if (len1 && ((len1 & 0x3) || (intptr_t) buf1 & 0x3)) - printf("send_pkt: bad alignment of len1 and/or buf1\n"); - - if (len2 && ((len2 & 0x3) || (intptr_t) buf2 & 0x3)) - printf("send_pkt: bad alignment of len2 and/or buf2\n"); - - if (len0){ - memcpy_wa(p, buf0, len0); - p += len0/sizeof(uint32_t); - } - if (len1){ - memcpy_wa(p, buf1, len1); - p += len1/sizeof(uint32_t); - } - if (len2){ - memcpy_wa(p, buf2, len2); - p += len2/sizeof(uint32_t); - } +send_pkt( + eth_mac_addr_t dst, int ethertype, + const void *buf0, size_t len0, + const void *buf1, size_t len1, + const void *buf2, size_t len2 +){ + + //control word for framed data + uint32_t ctrl_word = 0x0; + + //assemble the ethernet header + padded_eth_hdr_t ehdr; + ehdr.pad = 0; + ehdr.dst = dst; + ehdr.src = _local_mac_addr; + ehdr.ethertype = ethertype; + + //grab an out buffer and pointer + uint8_t *buff = (uint8_t *)pkt_ctrl_claim_outgoing_buffer(); + uint8_t *p = buff; + size_t total_len = 0; + + //create a list of all buffers to copy + const void *buffs[] = {&ctrl_word, &ehdr, buf0, buf1, buf2}; + size_t lens[] = {sizeof(ctrl_word), sizeof(ehdr), len0, len1, len2}; + + //copy each buffer into the out buffer + for (size_t i = 0; i < sizeof(buffs)/sizeof(buffs[0]); i++){ + total_len += lens[i]; //use full length (not clipped) + size_t bytes_remaining = out_buff_size - (size_t)(p - buff); + if (lens[i] > bytes_remaining) lens[i] = bytes_remaining; + if (lens[i] && ((lens[i] & 0x3) || (intptr_t) buffs[i] & 0x3)) + printf("send_pkt: bad alignment of len and/or buf\n"); + memcpy_wa(p, buffs[i], lens[i]); + p += lens[i]; + } - size_t total_len = (p - buff) * sizeof(uint32_t); - if (total_len < 60) // ensure that we don't try to send a short packet - total_len = 60; + //ensure that minimum length requirements are met + if (total_len < 64) total_len = 64; //60 + ctrl word - pkt_ctrl_commit_outgoing_buffer(total_len/4); - if (debug) printf("sent %d bytes\n", (int)total_len); + pkt_ctrl_commit_outgoing_buffer(total_len/sizeof(uint32_t)); + if (debug) printf("sent %d bytes\n", (int)total_len); } unsigned int CHKSUM(unsigned int x, unsigned int *chksum) @@ -277,15 +268,24 @@ handle_icmp_packet(struct ip_addr src, struct ip_addr dst, //filter out non udp data response struct ip_hdr *ip = (struct ip_hdr *)(((uint8_t*)icmp) + sizeof(struct icmp_echo_hdr)); struct udp_hdr *udp = (struct udp_hdr *)(((char *)ip) + IP_HLEN); - if (IPH_PROTO(ip) != IP_PROTO_UDP || udp->dest != fp_socket_dst.port) return; - - //end async update packets per second - sr_tx_ctrl->cyc_per_up = 0; - - //the end continuous streaming command - sr_rx_ctrl->cmd = 1 << 31; //no samples now - sr_rx_ctrl->time_secs = 0; - sr_rx_ctrl->time_ticks = 0; //latch the command + if (IPH_PROTO(ip) != IP_PROTO_UDP) break; + + if (udp->dest == dsp0_dst_port){ + //the end continuous streaming command + sr_rx_ctrl0->cmd = 1 << 31; //no samples now + sr_rx_ctrl0->time_secs = 0; + sr_rx_ctrl0->time_ticks = 0; //latch the command + } + else if (udp->dest == dsp1_dst_port){ + //the end continuous streaming command + sr_rx_ctrl1->cmd = 1 << 31; //no samples now + sr_rx_ctrl1->time_secs = 0; + sr_rx_ctrl1->time_ticks = 0; //latch the command + } + else if (udp->dest == err0_dst_port){ + //end async update packets per second + sr_tx_ctrl->cyc_per_up = 0; + } //struct udp_hdr *udp = (struct udp_hdr *)((char *)icmp + 28); //printf("icmp port unr %d\n", udp->dest); diff --git a/firmware/zpu/usrp2/memory_map.h b/firmware/zpu/usrp2/memory_map.h index e728a1ddb..79b11759a 100644 --- a/firmware/zpu/usrp2/memory_map.h +++ b/firmware/zpu/usrp2/memory_map.h @@ -1,4 +1,4 @@ -/* -*- c -*- */ +// Copyright 2010-2011 Ettus Research LLC /* * Copyright 2007,2008,2009 Free Software Foundation, Inc. * @@ -227,8 +227,10 @@ hwconfig_wishbone_divisor(void) #define SR_UDP_SM 96 #define SR_TX_DSP 208 #define SR_TX_CTRL 224 -#define SR_RX_DSP 160 -#define SR_RX_CTRL 176 +#define SR_RX_DSP0 160 +#define SR_RX_DSP1 240 +#define SR_RX_CTRL0 176 +#define SR_RX_CTRL1 32 #define SR_TIME64 192 #define SR_SIMTIMER 198 #define SR_LAST 255 @@ -350,10 +352,7 @@ typedef struct { #define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM)) -// --- dsp tx regs --- - -#define MIN_CIC_INTERP 1 -#define MAX_CIC_INTERP 128 +// --- VITA TX CTRL regs --- typedef struct { volatile uint32_t num_chan; @@ -366,52 +365,6 @@ typedef struct { #define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL)) -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t interp_rate; - volatile uint32_t _padding0; // padding for the tx_mux - // NOT freq, scale, interp - /*! - * \brief output mux configuration. - * - * <pre> - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------------------------------+-------+-------+-------+-------+ - * | | DAC1 | DAC0 | - * +-------------------------------+-------+-------+-------+-------+ - * - * There are N DUCs (1 now) with complex inputs and outputs. - * There are two DACs. - * - * Each 4-bit DACx field specifies the source for the DAC - * Each subfield is coded like this: - * - * 3 2 1 0 - * +-------+ - * | N | - * +-------+ - * - * N specifies which DUC output is connected to this DAC. - * - * N which interp output - * --- ------------------- - * 0 DUC 0 I - * 1 DUC 0 Q - * 2 DUC 1 I - * 3 DUC 1 Q - * F All Zeros - * - * The default value is 0x10 - * </pre> - */ - volatile uint32_t tx_mux; - -} dsp_tx_regs_t; - -#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP)) - // --- VITA RX CTRL regs --- typedef struct { // The following 3 are logically a single command register. @@ -419,81 +372,10 @@ typedef struct { volatile uint32_t cmd; // {now, chain, num_samples(30) volatile uint32_t time_secs; volatile uint32_t time_ticks; - - volatile uint32_t clear_overrun; // write anything to clear overrun - volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter - volatile uint32_t vrt_stream_id; // word 1 of packet. - volatile uint32_t vrt_trailer; - volatile uint32_t nsamples_per_pkt; - volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources - volatile uint32_t pad[7]; // Make each structure 16 elements long } sr_rx_ctrl_t; -#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL)) - -// --- dsp rx regs --- -#define MIN_CIC_DECIM 1 -#define MAX_CIC_DECIM 128 - -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t decim_rate; - volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits, - // otherwise it is automatic - volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits - - /*! - * \brief input mux configuration. - * - * This determines which ADC (or constant zero) is connected to - * each DDC input. There are N DDCs (1 now). Each has two inputs. - * - * <pre> - * Mux value: - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * | |Q0 |I0 | - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * - * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) - * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) - * - * The default value is 0x4 - * </pre> - */ - volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v - - /*! - * \brief Streaming GPIO configuration - * - * This determines whether the LSBs of I and Q samples come from the DSP - * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first - * set the GPIO data direction register to have io_rx[15] and/or io_rx[14] - * configured as inputs. The GPIO pins will be sampled at the time the - * remainder of the DSP sample is strobed into the RX sample FIFO. There - * will be a decimation-dependent fixed time offset between the GPIO - * sample stream and the associated RF samples. - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * | MBZ |Q|I| - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * - * I 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[15] - * - * Q 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[14] - */ - volatile uint32_t gpio_stream_enable; - -} dsp_rx_regs_t; - -#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP)) +#define sr_rx_ctrl0 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL0)) +#define sr_rx_ctrl1 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL1)) // ---------------------------------------------------------------- // VITA49 64 bit time (write only) diff --git a/firmware/zpu/usrp2p/memory_map.h b/firmware/zpu/usrp2p/memory_map.h index 36d8ac9f2..2567a4588 100644 --- a/firmware/zpu/usrp2p/memory_map.h +++ b/firmware/zpu/usrp2p/memory_map.h @@ -1,4 +1,4 @@ -/* -*- c -*- */ +// Copyright 2010-2011 Ettus Research LLC /* * Copyright 2007,2008,2009 Free Software Foundation, Inc. * @@ -218,8 +218,10 @@ hwconfig_wishbone_divisor(void) #define SR_UDP_SM 96 #define SR_TX_DSP 208 #define SR_TX_CTRL 224 -#define SR_RX_DSP 160 -#define SR_RX_CTRL 176 +#define SR_RX_DSP0 160 +#define SR_RX_DSP1 240 +#define SR_RX_CTRL0 176 +#define SR_RX_CTRL1 32 #define SR_TIME64 192 #define SR_SIMTIMER 198 #define SR_LAST 255 @@ -343,10 +345,7 @@ typedef struct { #define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM)) -// --- dsp tx regs --- - -#define MIN_CIC_INTERP 1 -#define MAX_CIC_INTERP 128 +// --- VITA TX CTRL regs --- typedef struct { volatile uint32_t num_chan; @@ -359,52 +358,6 @@ typedef struct { #define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL)) -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t interp_rate; - volatile uint32_t _padding0; // padding for the tx_mux - // NOT freq, scale, interp - /*! - * \brief output mux configuration. - * - * <pre> - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------------------------------+-------+-------+-------+-------+ - * | | DAC1 | DAC0 | - * +-------------------------------+-------+-------+-------+-------+ - * - * There are N DUCs (1 now) with complex inputs and outputs. - * There are two DACs. - * - * Each 4-bit DACx field specifies the source for the DAC - * Each subfield is coded like this: - * - * 3 2 1 0 - * +-------+ - * | N | - * +-------+ - * - * N specifies which DUC output is connected to this DAC. - * - * N which interp output - * --- ------------------- - * 0 DUC 0 I - * 1 DUC 0 Q - * 2 DUC 1 I - * 3 DUC 1 Q - * F All Zeros - * - * The default value is 0x10 - * </pre> - */ - volatile uint32_t tx_mux; - -} dsp_tx_regs_t; - -#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP)) - // --- VITA RX CTRL regs --- typedef struct { // The following 3 are logically a single command register. @@ -412,81 +365,10 @@ typedef struct { volatile uint32_t cmd; // {now, chain, num_samples(30) volatile uint32_t time_secs; volatile uint32_t time_ticks; - - volatile uint32_t clear_overrun; // write anything to clear overrun - volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter - volatile uint32_t vrt_stream_id; // word 1 of packet. - volatile uint32_t vrt_trailer; - volatile uint32_t nsamples_per_pkt; - volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources - volatile uint32_t pad[7]; // Make each structure 16 elements long } sr_rx_ctrl_t; -#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL)) - -// --- dsp rx regs --- -#define MIN_CIC_DECIM 1 -#define MAX_CIC_DECIM 128 - -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t decim_rate; - volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits, - // otherwise it is automatic - volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits - - /*! - * \brief input mux configuration. - * - * This determines which ADC (or constant zero) is connected to - * each DDC input. There are N DDCs (1 now). Each has two inputs. - * - * <pre> - * Mux value: - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * | |Q0 |I0 | - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * - * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) - * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) - * - * The default value is 0x4 - * </pre> - */ - volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v - - /*! - * \brief Streaming GPIO configuration - * - * This determines whether the LSBs of I and Q samples come from the DSP - * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first - * set the GPIO data direction register to have io_rx[15] and/or io_rx[14] - * configured as inputs. The GPIO pins will be sampled at the time the - * remainder of the DSP sample is strobed into the RX sample FIFO. There - * will be a decimation-dependent fixed time offset between the GPIO - * sample stream and the associated RF samples. - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * | MBZ |Q|I| - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * - * I 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[15] - * - * Q 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[14] - */ - volatile uint32_t gpio_stream_enable; - -} dsp_rx_regs_t; - -#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP)) +#define sr_rx_ctrl0 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL0)) +#define sr_rx_ctrl1 ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL1)) // ---------------------------------------------------------------- // VITA49 64 bit time (write only) diff --git a/fpga/usrp2/control_lib/Makefile.srcs b/fpga/usrp2/control_lib/Makefile.srcs index 5ae185ee8..751b40828 100644 --- a/fpga/usrp2/control_lib/Makefile.srcs +++ b/fpga/usrp2/control_lib/Makefile.srcs @@ -50,9 +50,4 @@ bootram.v \ nsgpio16LE.v \ settings_bus_16LE.v \ atr_controller16.v \ -newfifo/fifo_pacer.v \ -newfifo/packet_generator32.v \ -newfifo/packet_generator.v \ -newfifo/packet_verifier32.v \ -newfifo/packet_verifier.v \ )) diff --git a/fpga/usrp2/control_lib/newfifo/packet_generator.v b/fpga/usrp2/control_lib/newfifo/packet_generator.v deleted file mode 100644 index 6e8b45ccd..000000000 --- a/fpga/usrp2/control_lib/newfifo/packet_generator.v +++ /dev/null @@ -1,59 +0,0 @@ - - -module packet_generator - (input clk, input reset, input clear, - output reg [7:0] data_o, output sof_o, output eof_o, - output src_rdy_o, input dst_rdy_i); - - localparam len = 32'd2000; - - reg [31:0] state; - reg [31:0] seq; - wire [31:0] crc_out; - wire calc_crc = src_rdy_o & dst_rdy_i & ~(state[31:2] == 30'h3FFF_FFFF); - - - always @(posedge clk) - if(reset | clear) - seq <= 0; - else - if(eof_o & src_rdy_o & dst_rdy_i) - seq <= seq + 1; - - always @(posedge clk) - if(reset | clear) - state <= 0; - else - if(src_rdy_o & dst_rdy_i) - if(state == (len - 1)) - state <= 32'hFFFF_FFFC; - else - state <= state + 1; - - always @* - case(state) - 0 : data_o <= len[7:0]; - 1 : data_o <= len[15:8]; - 2 : data_o <= len[23:16]; - 3 : data_o <= len[31:24]; - 4 : data_o <= seq[7:0]; - 5 : data_o <= seq[15:8]; - 6 : data_o <= seq[23:16]; - 7 : data_o <= seq[31:24]; - 32'hFFFF_FFFC : data_o <= crc_out[31:24]; - 32'hFFFF_FFFD : data_o <= crc_out[23:16]; - 32'hFFFF_FFFE : data_o <= crc_out[15:8]; - 32'hFFFF_FFFF : data_o <= crc_out[7:0]; - default : data_o <= state[7:0]; - endcase // case (state) - - assign src_rdy_o = 1; - assign sof_o = (state == 0); - assign eof_o = (state == 32'hFFFF_FFFF); - - wire clear_crc = eof_o & src_rdy_o & dst_rdy_i; - - crc crc(.clk(clk), .reset(reset), .clear(clear_crc), .data(data_o), - .calc(calc_crc), .crc_out(crc_out), .match()); - -endmodule // packet_generator diff --git a/fpga/usrp2/control_lib/newfifo/packet_verifier32.v b/fpga/usrp2/control_lib/newfifo/packet_verifier32.v deleted file mode 100644 index 06a13d242..000000000 --- a/fpga/usrp2/control_lib/newfifo/packet_verifier32.v +++ /dev/null @@ -1,30 +0,0 @@ - - -module packet_verifier32 - (input clk, input reset, input clear, - input [35:0] data_i, input src_rdy_i, output dst_rdy_o, - output [31:0] total, output [31:0] crc_err, output [31:0] seq_err, output [31:0] len_err); - - wire [7:0] ll_data; - wire ll_sof_n, ll_eof_n, ll_src_rdy_n, ll_dst_rdy; - wire [35:0] data_int; - wire src_rdy_int, dst_rdy_int; - - fifo_short #(.WIDTH(36)) fifo_short - (.clk(clk), .reset(reset), .clear(clear), - .datain(data_i), .src_rdy_i(src_rdy_i), .dst_rdy_o(dst_rdy_o), - .dataout(data_int), .src_rdy_o(src_rdy_int), .dst_rdy_i(dst_rdy_int)); - - fifo36_to_ll8 f36_to_ll8 - (.clk(clk), .reset(reset), .clear(clear), - .f36_data(data_int), .f36_src_rdy_i(src_rdy_int), .f36_dst_rdy_o(dst_rdy_int), - .ll_data(ll_data), .ll_sof_n(ll_sof_n), .ll_eof_n(ll_eof_n), - .ll_src_rdy_n(ll_src_rdy_n), .ll_dst_rdy_n(~ll_dst_rdy)); - - packet_verifier pkt_ver - (.clk(clk), .reset(reset), .clear(clear), - .data_i(ll_data), .sof_i(~ll_sof_n), .eof_i(~ll_eof_n), - .src_rdy_i(~ll_src_rdy_n), .dst_rdy_o(ll_dst_rdy), - .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); - -endmodule // packet_verifier32 diff --git a/fpga/usrp2/extram/.gitignore b/fpga/usrp2/extram/.gitignore deleted file mode 100644 index 7fc71ccb6..000000000 --- a/fpga/usrp2/extram/.gitignore +++ /dev/null @@ -1 +0,0 @@ -/a.out diff --git a/fpga/usrp2/extram/Makefile.srcs b/fpga/usrp2/extram/Makefile.srcs deleted file mode 100644 index 90be02142..000000000 --- a/fpga/usrp2/extram/Makefile.srcs +++ /dev/null @@ -1,10 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# - -################################################## -# Extram Sources -################################################## -EXTRAM_SRCS = $(abspath $(addprefix $(BASE_DIR)/../extram/, \ -wb_zbt16_b.v \ -)) diff --git a/fpga/usrp2/extram/extram_interface.v b/fpga/usrp2/extram/extram_interface.v deleted file mode 100644 index 7554592ba..000000000 --- a/fpga/usrp2/extram/extram_interface.v +++ /dev/null @@ -1,53 +0,0 @@ - -// Temporary buffer pool storage, mostly useful for pre-generated data streams or -// for making more space to juggle packets in case of eth frames coming out of order - -module extram_interface - (input clk, input rst, - input set_stb, input [7:0] set_addr, input [31:0] set_data, - - // Buffer pool interfaces - input [31:0] rd_dat_i, output rd_read_o, output rd_done_o, output rd_error_o, - input rd_sop_i, input rd_eop_i, - output [31:0] wr_dat_o, output wr_write_o, output wr_done_o, output wr_error_o, - input wr_ready_i, input wr_full_i, - - // RAM Interface - inout [17:0] RAM_D, - output [18:0] RAM_A, - output RAM_CE1n, - output RAM_CENn, - input RAM_CLK, - output RAM_WEn, - output RAM_OEn, - output RAM_LDn ); - - // Command format -- - // Read/_Write , start address[17:0] - wire [18:0] cmd_in; - wire cmd_stb, store_wr_cmd, store_rd_cmd, read_wr_cmd, read_rd_cmd; - wire empty_wr_cmd, empty_rd_cmd, full_wr_cmd, full_rd_cmd; - - // Dummy logic - assign RAM_OEn = 1; - - setting_reg #(.my_addr(0)) - sr_ram_cmd (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(cmd_in),.changed(cmd_stb)); - - reg cmd_stb_d1; - always @(posedge clk) cmd_stb_d1 <= cmd_stb; - assign store_wr_cmd = ~cmd_in[18] & cmd_stb & ~cmd_stb_d1; - assign store_rd_cmd = cmd_in[18] & cmd_stb & ~cmd_stb_d1; - - shortfifo #(.WIDTH(19)) wr_cmd_fifo - (.clk(clk),.rst(rst),.clear(1'b0), - .datain(cmd_in), .write(store_wr_cmd), .full(full_wr_cmd), - .dataout(), .read(read_wr_cmd), .empty(empty_wr_cmd) ); - - shortfifo #(.WIDTH(19)) rd_cmd_fifo - (.clk(clk),.rst(rst),.clear(1'b0), - .datain(cmd_in), .write(store_rd_cmd), .full(full_rd_cmd), - .dataout(), .read(read_rd_cmd), .empty(empty_rd_cmd) ); - -endmodule // extram_interface diff --git a/fpga/usrp2/extram/extram_wb.v b/fpga/usrp2/extram/extram_wb.v deleted file mode 100644 index c8428783a..000000000 --- a/fpga/usrp2/extram/extram_wb.v +++ /dev/null @@ -1,146 +0,0 @@ - -module extram_wb - #(parameter PAGE_SIZE = 10, - parameter ADDR_WIDTH = 16) - (input clk, input rst, - input wb_clk, input wb_rst, - input cyc_i, input stb_i, - input [ADDR_WIDTH-1:0] adr_i, - input we_i, - input [31:0] dat_i, - output reg [31:0] dat_o, - output reg ack_o, - - inout [17:0] RAM_D, - output [PAGE_SIZE-2:0] RAM_A, - output RAM_CE1n, output RAM_CENn, - output RAM_CLK, output RAM_WEn, - output RAM_OEn, output RAM_LDn ); - - wire read_acc = stb_i & cyc_i & ~we_i; - wire write_acc = stb_i & cyc_i & we_i; - wire acc = stb_i & cyc_i; - - assign RAM_CLK = ~wb_clk; // 50 MHz for now, eventually should be 200 MHz - assign RAM_LDn = 0; // No burst for now - assign RAM_CENn = 0; // Use CE1n as our main CE - - reg [PAGE_SIZE-2:1] RAM_addr_reg; - always @(posedge wb_clk) - if(acc) - RAM_addr_reg[PAGE_SIZE-2:1] <= adr_i[PAGE_SIZE-1:2]; - assign RAM_A[PAGE_SIZE-2:1] = RAM_addr_reg; - - reg [31:0] ram_out; - always @(posedge wb_clk) - if(write_acc) - ram_out <= dat_i; - - // RAM access state machine - localparam RAM_idle = 0; - localparam RAM_read_1 = 1; - localparam RAM_read_2 = 2; - localparam RAM_read_3 = 3; - localparam RAM_read_4 = 4; - localparam RAM_write_1 = 6; - localparam RAM_write_2 = 7; - localparam RAM_write_3 = 8; - localparam RAM_write_4 = 9; - - reg myOE = 0; - reg RAM_OE = 0; - reg RAM_WE = 0; - reg RAM_EN = 0; - reg RAM_A0_reg; - reg [3:0] RAM_state; - - always @(posedge wb_clk) - if(wb_rst) - begin - RAM_state <= RAM_idle; - myOE <= 0; RAM_OE <= 0; RAM_WE <= 0; RAM_EN <= 0; RAM_A0_reg <= 0; - end - else - case(RAM_state) - RAM_idle : - if(read_acc & ~ack_o) - begin - RAM_state <= RAM_read_1; - myOE <= 0; RAM_OE <= 0; RAM_WE <= 0; RAM_EN <= 1; RAM_A0_reg <= 0; - end - else if(write_acc & ~ack_o) - begin - RAM_state <= RAM_write_1; - myOE <= 0; RAM_OE <= 0; RAM_WE <= 1; RAM_EN <= 1; RAM_A0_reg <= 0; - end - else - begin - myOE <= 0; RAM_OE <= 0; RAM_WE <= 0; RAM_EN <= 0; RAM_A0_reg <= 0; - end - RAM_read_1 : - begin - RAM_state <= RAM_read_2; - myOE <= 0; RAM_OE <= 0; RAM_WE <= 0; RAM_EN <= 1; RAM_A0_reg <= 1; - end - RAM_read_2 : - begin - RAM_state <= RAM_read_3; - myOE <= 0; RAM_OE <= 1; RAM_WE <= 0; RAM_EN <= 0; RAM_A0_reg <= 0; - end - RAM_read_3 : - begin - RAM_state <= RAM_read_4; - myOE <= 0; RAM_OE <= 1; RAM_WE <= 0; RAM_EN <= 0; RAM_A0_reg <= 0; - end - RAM_read_4 : - begin - RAM_state <= RAM_idle; - myOE <= 0; RAM_OE <= 0; RAM_WE <= 0; RAM_EN <= 0; RAM_A0_reg <= 0; - end - RAM_write_1 : - begin - RAM_state <= RAM_write_2; - myOE <= 1; RAM_OE <= 0; RAM_WE <= 1; RAM_EN <= 1; RAM_A0_reg <= 1; - end - RAM_write_2 : - begin - RAM_state <= RAM_write_3; - myOE <= 1; RAM_OE <= 0; RAM_WE <= 0; RAM_EN <= 0; RAM_A0_reg <= 0; - end - RAM_write_3 : - begin - RAM_state <= RAM_write_4; - myOE <= 1; RAM_OE <= 0; RAM_WE <= 0; RAM_EN <= 0; RAM_A0_reg <= 0; - end - RAM_write_4 : - begin - RAM_state <= RAM_idle; - myOE <= 0; RAM_OE <= 0; RAM_WE <= 0; RAM_EN <= 0; RAM_A0_reg <= 0; - end - default : RAM_state <= RAM_idle; - endcase // case(RAM_state) - - assign RAM_A[0] = RAM_A0_reg; - assign RAM_WEn = ~RAM_WE; // ((RAM_state==RAM_write_1)||(RAM_state==RAM_write_2)); - assign RAM_OEn = ~RAM_OE; - assign RAM_CE1n = ~RAM_EN; // Active low (RAM_state != RAM_idle); - - assign RAM_D[17:16] = 2'bzz; - assign RAM_D[15:0] = myOE ? ((RAM_state==RAM_write_2)?ram_out[15:0]:ram_out[31:16]) - : 16'bzzzz_zzzz_zzzz_zzzz; - - always @(posedge wb_clk) - if(RAM_state == RAM_read_3) - dat_o[15:0] <= RAM_D[15:0]; - else - dat_o[31:16] <= RAM_D[15:0]; - - always @(posedge wb_clk) - if(wb_rst) - ack_o <= 0; - else if((RAM_state == RAM_write_4)||(RAM_state == RAM_read_4)) - ack_o <= 1; - else - ack_o <= 0; - -endmodule // extram_wb diff --git a/fpga/usrp2/extram/wb_zbt16_b.v b/fpga/usrp2/extram/wb_zbt16_b.v deleted file mode 100644 index d93e21c99..000000000 --- a/fpga/usrp2/extram/wb_zbt16_b.v +++ /dev/null @@ -1,63 +0,0 @@ - -module wb_zbt16_b - (input clk, - input rst, - // Wishbone bus A, highest priority, with prefetch - input [19:0] wb_adr_i, - input [15:0] wb_dat_i, - output reg [15:0] wb_dat_o, - input [ 1:0] wb_sel_i, - input wb_cyc_i, - input wb_stb_i, - output reg wb_ack_o, - input wb_we_i, - // Memory connection - output sram_clk, - output [18:0] sram_a, - inout [15:0] sram_d, - output sram_we, - output [ 1:0] sram_bw, - output sram_adv, - output sram_ce, - output sram_oe, - output sram_mode, - output sram_zz - ); - - assign sram_clk = ~clk; - //assign sram_oe = 1'b0; - assign sram_ce = 1'b0; - assign sram_adv = 1'b0; - assign sram_mode = 1'b0; - assign sram_zz = 1'b0; - assign sram_bw = 2'b0; - - // need to drive wb_dat_o, wb_ack_o, - // sram_a, sram_d, sram_we - wire myOE; - assign sram_d = myOE ? wb_dat_i : 16'bzzzz; - assign sram_a = wb_adr_i[19:1]; - - reg read_d1, read_d2, read_d3, write_d1, write_d2, write_d3; - wire acc = wb_cyc_i & wb_stb_i; - wire read_acc = wb_cyc_i & wb_stb_i & ~wb_we_i & ~read_d1 & ~read_d2 & ~read_d3; - wire write_acc = wb_cyc_i & wb_stb_i & wb_we_i & ~write_d1 & ~write_d2 & ~write_d3; - - assign sram_we = ~write_acc; - assign sram_oe = ~(read_d2 | read_d3); - assign myOE = write_d1 | write_d2; - wire latch_now = read_d2; - - always @(posedge clk) - if(latch_now) - wb_dat_o <= sram_d; - - always @(posedge clk) wb_ack_o <= read_d2 | write_d2; - always @(posedge clk) read_d1 <= read_acc; - always @(posedge clk) read_d2 <= read_d1; - always @(posedge clk) read_d3 <= read_d2; - always @(posedge clk) write_d1 <= write_acc; - always @(posedge clk) write_d2 <= write_d1; - always @(posedge clk) write_d3 <= write_d2; -endmodule // wb_zbt16_b - diff --git a/fpga/usrp2/extramfifo/fifo_extram.v b/fpga/usrp2/extramfifo/fifo_extram.v deleted file mode 100644 index 4e1f40371..000000000 --- a/fpga/usrp2/extramfifo/fifo_extram.v +++ /dev/null @@ -1,188 +0,0 @@ - -// Everything on sram_clk - -module fifo_extram - (input reset, input clear, - input [17:0] datain, input src_rdy_i, output dst_rdy_o, output [15:0] space, input [15:0] occ_in, - output [17:0] dataout, output src_rdy_o, input dst_rdy_i, output [15:0] occupied, input [15:0] space_in, - input sram_clk, output [18:0] sram_a, inout [17:0] sram_d, output sram_we, - output [1:0] sram_bw, output sram_adv, output sram_ce, output sram_oe, - output sram_mode, output sram_zz); - - localparam AWIDTH = 19; // 1 MB in x18 - localparam RAMSIZE = ((1<<AWIDTH) - 1); - - wire do_store, do_retrieve; - reg [1:0] do_store_del, do_retr_del; - - reg [AWIDTH-1:0] addr_retrieve, addr_store; - always @(posedge sram_clk) - if(reset | clear) - addr_retrieve <= 0; - else if (do_retrieve) - addr_retrieve <= addr_retrieve + 1; - - always @(posedge sram_clk) - if(reset | clear) - addr_store <= 0; - else if(do_store) - addr_store <= addr_store + 1; - - //wire [AWIDTH-1:0] fullness = (addr_store - addr_retrieve); - reg [AWIDTH-1:0] fullness; - always @(posedge sram_clk) - if(reset | clear) - fullness <= 0; - else if(do_store) - fullness <= fullness + 1; - else if(do_retrieve) - fullness <= fullness - 1; - - // wire empty = (fullness == 0); - //wire full = (fullness == RAMSIZE); // 19'h7FF); - reg empty, full; - - // The math in the following functions is 'AWIDTH wide. Use - // continuous assignments to prevent the numbers from being - // promoted to 32-bit (which would make it wrap wrong). - // - wire [AWIDTH-1:0] addr_retrieve_p1, addr_store_p2; - assign addr_retrieve_p1 = addr_retrieve + 1; - assign addr_store_p2 = addr_store + 2; - - always @(posedge sram_clk) - if(reset | clear) - empty <= 1; - else if(do_store) - empty <= 0; - else if(do_retrieve & (/*(addr_retrieve + 1)*/ addr_retrieve_p1 == addr_store)) - empty <= 1; - - always @(posedge sram_clk) - if(reset | clear) - full <= 0; - else if(do_retrieve) - full <= 0; - else if(do_store & (/*(addr_store+2)*/ addr_store_p2 == addr_retrieve)) - full <= 1; - - reg can_store; - always @* - if(full | ~src_rdy_i) - can_store <= 0; - else if(do_store_del == 0) - can_store <= 1; - else if((do_store_del == 1) || (do_store_del == 2)) - can_store <= (occ_in > 1); - else - can_store <= (occ_in > 2); - - reg can_retrieve; - always @* - if(empty | ~dst_rdy_i) - can_retrieve <= 0; - else if(do_retr_del == 0) - can_retrieve <= 1; - else if((do_retr_del == 1) || (do_retr_del == 2)) - can_retrieve <= (space_in > 1); - else - can_retrieve <= (space_in > 2); - - reg [1:0] state; - localparam IDLE_STORE_NEXT = 0; - localparam STORE = 1; - localparam IDLE_RETR_NEXT = 2; - localparam RETRIEVE = 3; - - reg [7:0] countdown; - wire countdown_done = (countdown == 0); - - localparam CYCLE_SIZE = 6; - - assign do_store = can_store & (state == STORE); - assign do_retrieve = can_retrieve & (state == RETRIEVE); - always @(posedge sram_clk) - if(reset) - do_store_del <= 0; - else - do_store_del <= {do_store_del[0],do_store}; - - always @(posedge sram_clk) - if(reset) - do_retr_del <= 0; - else - do_retr_del <= {do_retr_del[0],do_retrieve}; - - always @(posedge sram_clk) - if(reset | clear) - begin - state <= IDLE_STORE_NEXT; - countdown <= 0; - end - else - case(state) - IDLE_STORE_NEXT : - if(can_store) - begin - state <= STORE; - countdown <= CYCLE_SIZE; - end - else if(can_retrieve) - begin - state <= RETRIEVE; - countdown <= CYCLE_SIZE; - end - STORE : - if(~can_store | (can_retrieve & countdown_done)) - state <= IDLE_RETR_NEXT; - else if(~countdown_done) - countdown <= countdown - 1; - IDLE_RETR_NEXT : - if(can_retrieve) - begin - state <= RETRIEVE; - countdown <= CYCLE_SIZE; - end - else if(can_store) - begin - state <= STORE; - countdown <= CYCLE_SIZE; - end - RETRIEVE : - if(~can_retrieve | (can_store & countdown_done)) - state <= IDLE_STORE_NEXT; - else if(~countdown_done) - countdown <= countdown - 1; - endcase // case (state) - - // RAM wires - assign sram_bw = 0; - assign sram_adv = 0; - assign sram_mode = 0; - assign sram_zz = 0; - assign sram_ce = 0; - - assign sram_a = (state==STORE) ? addr_store : addr_retrieve; - assign sram_we = ~do_store; - assign sram_oe = ~do_retr_del[1]; - assign my_oe = do_store_del[1] & sram_oe; - assign sram_d = my_oe ? datain : 18'bz; - - // FIFO wires - assign dataout = sram_d; - assign src_rdy_o = do_retr_del[1]; - assign dst_rdy_o = do_store_del[1]; - -endmodule // fifo_extram - - - //wire have_1 = (fullness == 1); - //wire have_2 = (fullness == 2); - //wire have_atleast_1 = ~empty; - //wire have_atleast_2 = ~(empty | have_1); - //wire have_atleast_3 = ~(empty | have_1 | have_2); - //wire full_minus_1 = (fullness == (RAMSIZE-1)); // 19'h7FE); - //wire full_minus_2 = (fullness == (RAMSIZE-2)); // 19'h7FD); - //wire spacefor_atleast_1 = ~full; - //wire spacefor_atleast_2 = ~(full | full_minus_1); - //wire spacefor_atleast_3 = ~(full | full_minus_1 | full_minus_2); diff --git a/fpga/usrp2/extramfifo/fifo_extram36.v b/fpga/usrp2/extramfifo/fifo_extram36.v deleted file mode 100644 index 29342fdc4..000000000 --- a/fpga/usrp2/extramfifo/fifo_extram36.v +++ /dev/null @@ -1,47 +0,0 @@ - -// 18 bit interface means we either can't handle errors or can't handle odd lengths -// unless we go to heroic measures - -module fifo_extram36 - (input clk, input reset, input clear, - input [35:0] datain, input src_rdy_i, output dst_rdy_o, output [15:0] space, - output [35:0] dataout, output src_rdy_o, input dst_rdy_i, output [15:0] occupied, - input sram_clk, output [18:0] sram_a, inout [17:0] sram_d, output sram_we, - output [1:0] sram_bw, output sram_adv, output sram_ce, output sram_oe, output sram_mode, - output sram_zz); - - wire [17:0] f18_data_1, f18_data_2, f18_data_3, f18_data_4; - wire f18_src_rdy_1, f18_dst_rdy_1, f18_src_rdy_2, f18_dst_rdy_2; - wire f18_src_rdy_3, f18_dst_rdy_3, f18_src_rdy_4, f18_dst_rdy_4; - - fifo36_to_fifo18 f36_to_f18 - (.clk(clk), .reset(reset), .clear(clear), - .f36_datain(datain), .f36_src_rdy_i(src_rdy_i), .f36_dst_rdy_o(dst_rdy_o), - .f18_dataout(f18_data_1), .f18_src_rdy_o(f18_src_rdy_1), .f18_dst_rdy_i(f18_dst_rdy_1) ); - - wire [15:0] f1_occ, f2_space; - - fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) fifo_2clock_in - (.wclk(clk), .datain(f18_data_1), .src_rdy_i(f18_src_rdy_1), .dst_rdy_o(f18_dst_rdy_1), .space(), - .rclk(sram_clk), .dataout(f18_data_2), .src_rdy_o(f18_src_rdy_2), .dst_rdy_i(f18_dst_rdy_2), .short_occupied(f1_occ), - .arst(reset) ); - - fifo_extram fifo_extram - (.reset(reset), .clear(clear), - .datain(f18_data_2), .src_rdy_i(f18_src_rdy_2), .dst_rdy_o(f18_dst_rdy_2), .space(), .occ_in(f1_occ), - .dataout(f18_data_3), .src_rdy_o(f18_src_rdy_3), .dst_rdy_i(f18_dst_rdy_3), .occupied(), .space_in(f2_space), - .sram_clk(sram_clk), .sram_a(sram_a), .sram_d(sram_d), .sram_we(sram_we), - .sram_bw(sram_bw), .sram_adv(sram_adv), .sram_ce(sram_ce), .sram_oe(sram_oe), - .sram_mode(sram_mode), .sram_zz(sram_zz)); - - fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) fifo_2clock_out - (.wclk(sram_clk), .datain(f18_data_3), .src_rdy_i(f18_src_rdy_3), .dst_rdy_o(f18_dst_rdy_3), .short_space(f2_space), - .rclk(clk), .dataout(f18_data_4), .src_rdy_o(f18_src_rdy_4), .dst_rdy_i(f18_dst_rdy_4), .occupied(), - .arst(reset) ); - - fifo18_to_fifo36 f18_to_f36 - (.clk(clk), .reset(reset), .clear(clear), - .f18_datain(f18_data_4), .f18_src_rdy_i(f18_src_rdy_4), .f18_dst_rdy_o(f18_dst_rdy_4), - .f36_dataout(dataout), .f36_src_rdy_o(src_rdy_o), .f36_dst_rdy_i(dst_rdy_i) ); - -endmodule // fifo_extram36 diff --git a/fpga/usrp2/extramfifo/fifo_extram36_tb.build b/fpga/usrp2/extramfifo/fifo_extram36_tb.build deleted file mode 100755 index ac9369758..000000000 --- a/fpga/usrp2/extramfifo/fifo_extram36_tb.build +++ /dev/null @@ -1 +0,0 @@ -iverilog -y ../models -y . -y ../control_lib/ -y ../coregen -y ../fifo -y /opt/Xilinx/10.1/ISE/verilog/src/XilinxCoreLib -y /opt/Xilinx/10.1/ISE/verilog/src/unisims/ -o fifo_extram36_tb fifo_extram36_tb.v diff --git a/fpga/usrp2/extramfifo/fifo_extram36_tb.v b/fpga/usrp2/extramfifo/fifo_extram36_tb.v deleted file mode 100644 index e5f8cef4c..000000000 --- a/fpga/usrp2/extramfifo/fifo_extram36_tb.v +++ /dev/null @@ -1,475 +0,0 @@ -`timescale 1ns/1ns - -module fifo_extram36_tb(); - - reg clk = 0; - reg sram_clk = 0; - reg rst = 1; - reg clear = 0; - - reg Verbose = 0; // - integer ErrorCount = 0; - - initial #1000 rst = 0; -// always #125 clk = ~clk; - task task_CLK; - reg [7:0] ran; - begin - while (1) begin - ran = $random; - if (ran[1]) - #62 clk = ~clk; - else - #63 clk = !clk; - end - end - endtask // task_CLK - initial task_CLK; - -// always #100 sram_clk = ~sram_clk; - task task_SSRAM_clk; - reg [7:0] ran; - begin - while (1) begin - ran = $random; - if (ran[0]) - #49 sram_clk = ~sram_clk; - else - #51 sram_clk = ~sram_clk; - end - end - endtask // task_SSRAM_clk - initial task_SSRAM_clk; - - reg [31:0] f36_data = 32'hX; - reg [1:0] f36_occ = 0; - reg f36_sof = 0, f36_eof = 0; - - wire [35:0] f36_in = {1'b0,f36_occ,f36_eof,f36_sof,f36_data}; - reg src_rdy_f36i = 0; - wire dst_rdy_f36i; - - wire [35:0] f36_out; - wire src_rdy_f36o; - reg dst_rdy_f36o = 0; - - wire [17:0] sram_d; - wire [18:0] sram_a; - wire [1:0] sram_bw; - wire sram_we, sram_adv, sram_ce, sram_oe, sram_mode, sram_zz; - - reg [31:0] ScoreBoard [524288:0]; - reg [18:0] put_index = 0; - reg [18:0] get_index = 0; - -// integer put_index = 0; -// integer get_index = 0; - - wire [15:0] DUT_space, DUT_occupied; - - fifo_extram36 fifo_extram36 - (.clk(clk), .reset(rst), .clear(clear), - .datain(f36_in), .src_rdy_i(src_rdy_f36i), .dst_rdy_o(dst_rdy_f36i), .space(DUT_space), - .dataout(f36_out), .src_rdy_o(src_rdy_f36o), .dst_rdy_i(dst_rdy_f36o), .occupied(DUT_occupied), - .sram_clk(sram_clk), .sram_a(sram_a), .sram_d(sram_d), .sram_we(sram_we), - .sram_bw(sram_bw), .sram_adv(sram_adv), .sram_ce(sram_ce), .sram_oe(sram_oe), - .sram_mode(sram_mode), .sram_zz(sram_zz)); - -`define idt 1 -`ifdef idt - wire [15:0] dummy16; - wire [1:0] dummy2; - - idt71v65603s150 - ram_model(.A(sram_a[17:0]), - .adv_ld_(sram_adv), // advance (high) / load (low) - .bw1_(0), .bw2_(0), .bw3_(0), .bw4_(0), // byte write enables (low) - .ce1_(0), .ce2(1), .ce2_(0), // chip enables - .cen_(sram_ce), // clock enable (low) - .clk(sram_clk), // clock - .IO({dummy16,sram_d[15:0]}), - .IOP({dummy2,sram_d[17:16]}), // data bus - .lbo_(sram_mode), // linear burst order (low) - .oe_(sram_oe), // output enable (low) - .r_w_(sram_we)); // read (high) / write (low) -`else - cy1356 ram_model(.d(sram_d),.clk(~sram_clk),.a(sram_a), - .bws(2'b00),.we_b(sram_we),.adv_lb(sram_adv), - .ce1b(0),.ce2(1),.ce3b(0), - .oeb(sram_oe),.cenb(sram_ce),.mode(sram_mode) ); -`endif - - task task_SSRAMMonitor; - reg last_mode; - reg last_clock; - reg last_load; - reg [18:0] sram_addr; - - begin - last_mode = 1'bX; - last_clock = 1'bX; - last_load = 1'bX; - - @ (posedge Verbose); - $dumpvars(0,fifo_extram36_tb); - - $display("%t:%m\t*** Task Started",$time); - while (1) @ (posedge sram_clk) begin - if (sram_mode !== last_mode) begin - $display("%t:%m\tSSRAM mode: %b",$time,sram_mode); - last_mode = sram_mode; - end - if (sram_adv !== last_load) begin - $display("%t:%m\tSSRAM adv/load: %b",$time,sram_adv); - last_load = sram_adv; - end - if (sram_ce !== last_clock) begin - $display("%t:%m\tSSRAM clock enable: %b",$time,sram_ce); - last_clock = sram_ce; - end - if (sram_ce == 1'b0) begin - if (sram_adv == 1'b0) begin -// $display("%t:%m\tSSRAM Address Load A=%h",$time,sram_a); - sram_addr = sram_a; - end else begin - sram_addr = sram_addr + 1; - end - if (sram_oe == 1'b0) begin - $display("%t:%m\tSSRAM Read Cycle A=%h(%h), D=%o",$time,sram_addr-2,sram_a,sram_d); - end - if (sram_we == 1'b0) begin - $display("%t:%m\tSSRAM Write Cycle A=%h(%h), D=%o",$time,sram_addr-2,sram_a,sram_d); - end - if ((sram_we == 1'b0) && (sram_oe == 1'b0)) begin - $display("%t:%m\t*** ERROR: _oe and _we both active",$time); - end - - end // if (sram_ce == 1'b0) - - end // always @ (posedge sram_clk) - end - endtask // task_SSRAMMonitor - - task ReadFromFIFO36; - begin - $display("%t: Read from FIFO36",$time); - #1 dst_rdy_f36o <= 1; - while(1) - begin - while(~src_rdy_f36o) - @(posedge clk); - $display("%t: Read: %h>",$time,f36_out); - @(posedge clk); - end - end - endtask // ReadFromFIFO36 - - initial dst_rdy_f36o = 0; - - task task_ReadFIFO36; - reg [7:0] ran; - begin - $display("%t:%m\t*** Task Started",$time); - while (1) begin - // Read on one of four clocks - #5 dst_rdy_f36o <= 1; - @(posedge clk); - if (src_rdy_f36o) begin - if (f36_out[31:0] != ScoreBoard[get_index]) begin - $display("%t:%m\tFIFO Get Error: R:%h, E:%h (%h)",$time,f36_out[31:0],ScoreBoard[get_index],get_index); - ErrorCount = ErrorCount + 1; - end else begin - if (Verbose) - $display("%t:%m\t(%5h) %o>",$time,get_index,f36_out); - end - get_index = get_index+1; - end else begin - if (ErrorCount >= 192) - $finish; - end // else: !if(src_rdy_f36o) - - #10; - ran = $random; - if (ran[2:0] != 3'b000) begin - dst_rdy_f36o <= 0; - if (ran[2] != 1'b0) begin - @(posedge clk); - @(posedge clk); - @(posedge clk); - end - if (ran[1] != 1'b0) begin - @(posedge clk); - @(posedge clk); - end - if (ran[0] != 1'b0) begin - @(posedge clk); - end - end - end // while (1) - end - - endtask // task_ReadFIFO36 - - - reg [15:0] count; - - task PutPacketInFIFO36; - input [31:0] data_start; - input [31:0] data_len; - - begin - count = 4; - src_rdy_f36i = 1; - f36_data = data_start; - f36_sof = 1; - f36_eof = 0; - f36_occ = 0; - - $display("%t: Put Packet in FIFO36",$time); - while(~dst_rdy_f36i) - #1; //@(posedge clk); - @(posedge clk); - - $display("%t: <%h PPI_FIFO36: Entered First Line",$time,f36_data); - f36_sof <= 0; - while(count+4 < data_len) - begin - f36_data = f36_data + 32'h01010101; - count = count + 4; - while(~dst_rdy_f36i) - #1; //@(posedge clk); - @(posedge clk); - $display("%t: <%h PPI_FIFO36: Entered New Line",$time,f36_data); - end - f36_data <= f36_data + 32'h01010101; - f36_eof <= 1; - if(count + 4 == data_len) - f36_occ <= 0; - else if(count + 3 == data_len) - f36_occ <= 3; - else if(count + 2 == data_len) - f36_occ <= 2; - else - f36_occ <= 1; - while(~dst_rdy_f36i) - @(posedge clk); - @(posedge clk); - f36_occ <= 0; - f36_eof <= 0; - f36_data <= 0; - src_rdy_f36i <= 0; - $display("%t: <%h PPI_FIFO36: Entered Last Line",$time,f36_data); - end - endtask // PutPacketInFIFO36 - - task task_WriteFIFO36; - integer i; - reg [7:0] ran; - - begin - f36_data = 32'bX; - if (rst != 1'b0) - @ (negedge rst); - $display("%t:%m\t*** Task Started",$time); - #10; - src_rdy_f36i = 1; - f36_data = $random; - for (i=0; i<64; i=i+0 ) begin - @ (posedge clk) ; - if (dst_rdy_f36i) begin - if (Verbose) - $display("%t:%m\t(%5h) %o<",$time,put_index,f36_in); - ScoreBoard[put_index] = f36_in[31:0]; - put_index = put_index + 1; - #5; - f36_data = $random; - i = i + 1; - end - ran = $random; - if (ran[1:0] != 2'b00) begin - @ (negedge clk); - src_rdy_f36i = 0; - #5; - @ (negedge clk) ; - src_rdy_f36i = 1; - end - end - src_rdy_f36i = 0; - f36_data = 32'bX; -// if (put_index > 19'h3ff00) -// Verbose = 1'b1; - - end - endtask // task_WriteFIFO36 - - initial $dumpfile("fifo_extram36_tb.vcd"); -// initial $dumpvars(0,fifo_extram36_tb); - initial $timeformat(-9, 0, " ns", 10); - initial task_SSRAMMonitor; - - initial - begin - @(negedge rst); - #40000; - @(posedge clk); - @(posedge clk); - @(posedge clk); - @(posedge clk); -// ReadFromFIFO36; - task_ReadFIFO36; - - end - - integer i; - - initial - begin - @(negedge rst); - @(posedge clk); - @(posedge clk); - @(posedge clk); - task_WriteFIFO36; - @(posedge clk); - @(posedge clk); - @(posedge clk); -// PutPacketInFIFO36(32'hA0B0C0D0,12); - @(posedge clk); - @(posedge clk); - #10000; - @(posedge clk); -// PutPacketInFIFO36(32'hE0F0A0B0,36); - @(posedge clk); - @(posedge clk); - task_WriteFIFO36; - @(posedge clk); - @(posedge clk); - #10000; - @(posedge clk); - @(posedge clk); - task_WriteFIFO36; -// @(posedge clk); -// #30000; -// @(posedge clk); -// @(posedge clk); - task_WriteFIFO36; -// @(posedge clk); -// #30000; -// @(posedge clk); -// @(posedge clk); - task_WriteFIFO36; -// @(posedge clk); -// #30000; -// @(posedge clk); -// @(posedge clk); - task_WriteFIFO36; - @(posedge clk); - #10000; - @(posedge clk); - @(posedge clk); - task_WriteFIFO36; - for (i=0; i<8192; i = i+1) begin - @(posedge clk); - #10000; - @(posedge clk); - @(posedge clk); - task_WriteFIFO36; - @(posedge clk); - end - -// $dumpvars(0,fifo_extram36_tb); - @(posedge clk); - task_WriteFIFO36; - @(posedge clk); - - #100000000; - $finish; - - end - - - initial - begin - @(negedge rst); - f36_occ <= 0; - repeat (100) - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= 32'h10203040; - f36_sof <= 1; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= f36_data + 32'h01010101; - f36_sof <= 0; - f36_eof <= 0; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 1; - f36_data <= 32'h1F2F3F4F; - f36_sof <= 0; - f36_eof <= 1; - @(posedge clk); - @(posedge clk); - src_rdy_f36i <= 0; - - - - end - -// initial #500000 $finish; -endmodule // fifo_extram_tb diff --git a/fpga/usrp2/extramfifo/fifo_extram_tb.build b/fpga/usrp2/extramfifo/fifo_extram_tb.build deleted file mode 100755 index 5607c8691..000000000 --- a/fpga/usrp2/extramfifo/fifo_extram_tb.build +++ /dev/null @@ -1 +0,0 @@ -iverilog -y ../models -y . -y ../control_lib/ -y ../coregen -y ../fifo -y /opt/Xilinx/10.1/ISE/verilog/src/XilinxCoreLib -y /opt/Xilinx/10.1/ISE/verilog/src/unisims/ -o fifo_extram_tb fifo_extram_tb.v diff --git a/fpga/usrp2/extramfifo/fifo_extram_tb.v b/fpga/usrp2/extramfifo/fifo_extram_tb.v deleted file mode 100644 index 73550d9ca..000000000 --- a/fpga/usrp2/extramfifo/fifo_extram_tb.v +++ /dev/null @@ -1,134 +0,0 @@ -module fifo_extram_tb(); - - reg clk = 0; - reg sram_clk = 0; - reg reset = 1; - reg clear = 0; - - initial #1000 reset = 0; - always #125 clk = ~clk; - always #100 sram_clk = ~sram_clk; - - reg [15:0] f18_data = 0; - reg f18_sof = 0, f18_eof = 0; - - wire [17:0] f18_in = {f18_eof,f18_sof,f18_data}; - reg src_rdy_f18i = 0; - wire dst_rdy_f18i; - - wire [17:0] f18_out; - wire src_rdy_f18o; - reg dst_rdy_f18o = 0; - - wire [17:0] f18_int; - wire src_rdy_f18int, dst_rdy_f18int; - - wire [17:0] sram_d; - wire [18:0] sram_a; - wire [1:0] sram_bw; - wire sram_we, sram_adv, sram_ce, sram_oe, sram_mode, sram_zz; - wire [15:0] f1_occ; - - fifo_short #(.WIDTH(18)) fifo_short - (.clk(sram_clk), .reset(reset), .clear(clear), - .datain(f18_in), .src_rdy_i(src_rdy_f18i), .dst_rdy_o(dst_rdy_f18i), .space(), - .dataout(f18_int), .src_rdy_o(src_rdy_f18int), .dst_rdy_i(dst_rdy_f18int), .occupied(f1_occ[4:0]) ); - - assign f1_occ[15:5] = 0; - - fifo_extram fifo_extram - (.reset(reset), .clear(clear), - .datain(f18_int), .src_rdy_i(src_rdy_f18int), .dst_rdy_o(dst_rdy_f18int), .space(), .occ_in(f1_occ), - .dataout(f18_out), .src_rdy_o(src_rdy_f18o), .dst_rdy_i(dst_rdy_f18o), .occupied(), .space_in(7), - .sram_clk(sram_clk), .sram_a(sram_a), .sram_d(sram_d), .sram_we(sram_we), - .sram_bw(sram_bw), .sram_adv(sram_adv), .sram_ce(sram_ce), .sram_oe(sram_oe), - .sram_mode(sram_mode), .sram_zz(sram_zz)); - -`define idt 1 -`ifdef idt - wire [15:0] dummy16; - wire [1:0] dummy2; - - idt71v65603s150 - ram_model(.A(sram_a[17:0]), - .adv_ld_(sram_adv), // advance (high) / load (low) - .bw1_(0), .bw2_(0), .bw3_(0), .bw4_(0), // byte write enables (low) - .ce1_(0), .ce2(1), .ce2_(0), // chip enables - .cen_(sram_ce), // clock enable (low) - .clk(sram_clk), // clock - .IO({dummy16,sram_d[15:0]}), - .IOP({dummy2,sram_d[17:16]}), // data bus - .lbo_(sram_mode), // linear burst order (low) - .oe_(sram_oe), // output enable (low) - .r_w_(sram_we)); // read (high) / write (low) -`else - cy1356 ram_model(.d(sram_d),.clk(sram_clk),.a(sram_a), - .bws(2'b00),.we_b(sram_we),.adv_lb(sram_adv), - .ce1b(0),.ce2(1),.ce3b(0), - .oeb(sram_oe),.cenb(sram_ce),.mode(sram_mode) ); -`endif // !`ifdef idt - - always @(posedge sram_clk) - if(dst_rdy_f18o & src_rdy_f18o) - $display("Read: %h",f18_out); - - always @(posedge sram_clk) - if(dst_rdy_f18int & src_rdy_f18int) - $display("Write: %h",f18_int); - - initial $dumpfile("fifo_extram_tb.vcd"); - initial $dumpvars(0,fifo_extram_tb); - - task SendPkt; - input [15:0] data_start; - input [31:0] data_len; - begin - @(posedge sram_clk); - f18_data = data_start; - f18_sof = 1; - f18_eof = 0; - src_rdy_f18i = 1; - while(~dst_rdy_f18i) - #1; - @(posedge sram_clk); - repeat(data_len - 2) - begin - f18_data = f18_data + 16'h0101; - f18_sof = 0; - while(~dst_rdy_f18i) - @(posedge sram_clk); - - @(posedge sram_clk); - end - f18_data = f18_data + 16'h0101; - f18_eof = 1; - while(~dst_rdy_f18i) - #1; - @(posedge sram_clk); - src_rdy_f18i = 0; - f18_data = 0; - f18_eof = 0; - end - endtask // SendPkt - - initial - begin - @(negedge reset); - @(posedge sram_clk); - @(posedge sram_clk); - #10000; - @(posedge sram_clk); - SendPkt(16'hA0B0, 100); - #10000; - //SendPkt(16'hC0D0, 220); - end - - initial - begin - #20000; - dst_rdy_f18o = 1; - end - - initial #200000 $finish; -endmodule // fifo_extram_tb - diff --git a/fpga/usrp2/fifo/Makefile.srcs b/fpga/usrp2/fifo/Makefile.srcs index f0b5b7bae..31b1f505a 100644 --- a/fpga/usrp2/fifo/Makefile.srcs +++ b/fpga/usrp2/fifo/Makefile.srcs @@ -28,4 +28,10 @@ fifo36_demux.v \ packet_router.v \ splitter36.v \ valve36.v \ +fifo_pacer.v \ +packet_dispatcher36_x3.v \ +packet_generator32.v \ +packet_generator.v \ +packet_verifier32.v \ +packet_verifier.v \ )) diff --git a/fpga/usrp2/fifo/buffer_int2.v b/fpga/usrp2/fifo/buffer_int2.v index 765b125fb..532980aa2 100644 --- a/fpga/usrp2/fifo/buffer_int2.v +++ b/fpga/usrp2/fifo/buffer_int2.v @@ -31,13 +31,15 @@ module buffer_int2 input rd_ready_i ); - reg [BUF_SIZE-1:0] rd_addr, wr_addr; + reg [15:0] rd_addr, wr_addr; // Handle pkt bigger than buffer + wire [15:0] rd_addr_next = rd_addr + 1; + reg [15:0] rd_length; + wire [31:0] ctrl; wire wr_done, wr_error, wr_idle; wire rd_done, rd_error, rd_idle; wire we, en, go; - reg [BUF_SIZE-1:0] lastline; wire read = ctrl[3]; wire rd_clear = ctrl[2]; wire write = ctrl[1]; @@ -72,13 +74,13 @@ module buffer_int2 begin rd_addr <= 0; rd_state <= PRE_READ; - lastline <= ctrl[15+BUF_SIZE:16]; + rd_length <= ctrl[31:16]; end PRE_READ : begin rd_state <= READING; - rd_addr <= rd_addr + 1; + rd_addr <= rd_addr_next; rd_occ <= 2'b00; rd_sop <= 1; rd_eop <= 0; @@ -88,8 +90,8 @@ module buffer_int2 if(rd_ready_i) begin rd_sop <= 0; - rd_addr <= rd_addr + 1; - if(rd_addr == lastline) + rd_addr <= rd_addr_next; + if(rd_addr_next == rd_length) begin rd_eop <= 1; // FIXME assign occ here @@ -145,17 +147,19 @@ module buffer_int2 assign rd_idle = (rd_state == IDLE); assign wr_idle = (wr_state == IDLE); + wire [BUF_SIZE-1:0] wr_addr_clip = (|wr_addr[15:BUF_SIZE]) ? {BUF_SIZE{1'b1}} : wr_addr[BUF_SIZE-1:0]; + ram_2port #(.DWIDTH(32),.AWIDTH(BUF_SIZE)) buffer_in // CPU reads here (.clka(wb_clk_i),.ena(wb_stb_i),.wea(1'b0), .addra(wb_adr_i[BUF_SIZE+1:2]),.dia(0),.doa(wb_dat_o), .clkb(clk),.enb(1'b1),.web(we), - .addrb(wr_addr),.dib(wr_data_i[31:0]),.dob()); + .addrb(wr_addr_clip),.dib(wr_data_i[31:0]),.dob()); ram_2port #(.DWIDTH(32),.AWIDTH(BUF_SIZE)) buffer_out // CPU writes here (.clka(wb_clk_i),.ena(wb_stb_i),.wea(wb_we_i), .addra(wb_adr_i[BUF_SIZE+1:2]),.dia(wb_dat_i),.doa(), .clkb(clk),.enb(en),.web(1'b0), - .addrb(rd_addr),.dib(0),.dob(rd_data_o[31:0])); + .addrb(rd_addr[BUF_SIZE-1:0]),.dib(0),.dob(rd_data_o[31:0])); always @(posedge wb_clk_i) if(wb_rst_i) @@ -167,7 +171,7 @@ module buffer_int2 sreg(.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),.in(set_data), .out(ctrl),.changed(go)); - assign status = { {(16-BUF_SIZE){1'b0}},wr_addr, + assign status = { wr_addr, 8'b0,1'b0,rd_idle,rd_error,rd_done, 1'b0,wr_idle,wr_error,wr_done}; endmodule // buffer_int2 diff --git a/fpga/usrp2/fifo/dsp_framer36.v b/fpga/usrp2/fifo/dsp_framer36.v index 34a05d91e..c2ae8f96c 100644 --- a/fpga/usrp2/fifo/dsp_framer36.v +++ b/fpga/usrp2/fifo/dsp_framer36.v @@ -2,97 +2,67 @@ // Frame DSP packets with a header line to be handled by the protocol machine module dsp_framer36 - #(parameter BUF_SIZE = 9) - ( - input clk, input rst, input clr, - input [35:0] inp_data, input inp_valid, output inp_ready, - output [35:0] out_data, output out_valid, input out_ready - ); + #(parameter BUF_SIZE = 9, + parameter PORT_SEL = 0) + (input clk, input reset, input clear, + input [35:0] data_i, input src_rdy_i, output dst_rdy_o, + output [35:0] data_o, output src_rdy_o, input dst_rdy_i); - localparam DSP_FRM_STATE_WAIT_SOF = 0; - localparam DSP_FRM_STATE_WAIT_EOF = 1; - localparam DSP_FRM_STATE_WRITE_HDR = 2; - localparam DSP_FRM_STATE_WRITE = 3; + wire dfifo_in_dst_rdy, dfifo_in_src_rdy, dfifo_out_dst_rdy, dfifo_out_src_rdy; + wire tfifo_in_dst_rdy, tfifo_in_src_rdy, tfifo_out_dst_rdy, tfifo_out_src_rdy; - reg [1:0] dsp_frm_state; - reg [BUF_SIZE-1:0] dsp_frm_addr; - reg [BUF_SIZE-1:0] dsp_frm_count; - wire [BUF_SIZE-1:0] dsp_frm_addr_next = dsp_frm_addr + 1'b1; + wire do_xfer_in = dfifo_in_src_rdy & dfifo_in_dst_rdy; + wire do_xfer_out = src_rdy_o & dst_rdy_i; + + wire have_space = dfifo_in_dst_rdy & tfifo_in_dst_rdy; + reg [15:0] pkt_len_in, pkt_len_out; + wire [15:0] tfifo_data; + wire [35:0] dfifo_out_data; + + assign dst_rdy_o = have_space; + assign dfifo_in_src_rdy = src_rdy_i & have_space; + + fifo_cascade #(.WIDTH(36), .SIZE(BUF_SIZE)) dfifo + (.clk(clk), .reset(reset), .clear(clear), + .datain(data_i), .src_rdy_i(dfifo_in_src_rdy), .dst_rdy_o(dfifo_in_dst_rdy), + .dataout(dfifo_out_data), .src_rdy_o(dfifo_out_src_rdy), .dst_rdy_i(dfifo_out_dst_rdy) ); - //DSP input stream ready in the following states - assign inp_ready = ( - dsp_frm_state == DSP_FRM_STATE_WAIT_SOF || - dsp_frm_state == DSP_FRM_STATE_WAIT_EOF - )? 1'b1 : 1'b0; + fifo_short #(.WIDTH(16)) tfifo + (.clk(clk), .reset(reset), .clear(clear), + .datain(pkt_len_in), .src_rdy_i(tfifo_in_src_rdy), .dst_rdy_o(tfifo_in_dst_rdy), + .dataout(tfifo_data), .src_rdy_o(tfifo_out_src_rdy), .dst_rdy_i(tfifo_out_dst_rdy), + .space(), .occupied() ); - //DSP framer output data mux (header or BRAM): - //The header is generated here from the count. - wire [31:0] dsp_frm_data_bram; - wire [15:0] dsp_frm_bytes = {dsp_frm_count, 2'b00}; - assign out_data = - (dsp_frm_state == DSP_FRM_STATE_WRITE_HDR)? {4'b0001, 16'b1, dsp_frm_bytes} : ( - (dsp_frm_addr == dsp_frm_count) ? {4'b0010, dsp_frm_data_bram} : ( - {4'b0000, dsp_frm_data_bram})); - assign out_valid = ( - (dsp_frm_state == DSP_FRM_STATE_WRITE_HDR) || - (dsp_frm_state == DSP_FRM_STATE_WRITE) - )? 1'b1 : 1'b0; + // FIXME won't handle single-line packets, will show wrong length + always @(posedge clk) + if(reset | clear) + pkt_len_in <= 0; + else if(do_xfer_in) + if(data_i[32]) // sof + pkt_len_in <= 2; // fixes off by one since number is stored before increment + else + pkt_len_in <= pkt_len_in + 1; - RAMB16_S36_S36 dsp_frm_buff( - //port A = DSP input interface (writes to BRAM) - .DOA(),.ADDRA(dsp_frm_addr),.CLKA(clk),.DIA(inp_data[31:0]),.DIPA(4'h0), - .ENA(inp_ready & inp_valid),.SSRA(0),.WEA(inp_ready & inp_valid), - //port B = DSP framer interface (reads from BRAM) - .DOB(dsp_frm_data_bram),.ADDRB(dsp_frm_addr),.CLKB(clk),.DIB(36'b0),.DIPB(4'h0), - .ENB(out_ready & out_valid),.SSRB(0),.WEB(1'b0) - ); + assign tfifo_in_src_rdy = do_xfer_in & data_i[33]; // store length when at eof in + assign tfifo_out_dst_rdy = do_xfer_out & data_o[33]; // remove length from list at eof out - always @(posedge clk) - if(rst | clr) begin - dsp_frm_state <= DSP_FRM_STATE_WAIT_SOF; - dsp_frm_addr <= 0; - end - else begin - case(dsp_frm_state) - DSP_FRM_STATE_WAIT_SOF: begin - if (inp_ready & inp_valid & inp_data[32]) begin - dsp_frm_addr <= dsp_frm_addr_next; - dsp_frm_state <= DSP_FRM_STATE_WAIT_EOF; - end - end + always @(posedge clk) + if(reset | clear) + pkt_len_out <= 0; + else if(do_xfer_out) + if(dfifo_out_data[33]) // eof + pkt_len_out <= 0; + else + pkt_len_out <= pkt_len_out + 1; + + assign dfifo_out_dst_rdy = do_xfer_out & (pkt_len_out != 0); - DSP_FRM_STATE_WAIT_EOF: begin - if (inp_ready & inp_valid) begin - if (inp_data[33]) begin - dsp_frm_count <= dsp_frm_addr_next; - dsp_frm_addr <= 0; - dsp_frm_state <= DSP_FRM_STATE_WRITE_HDR; - end - else begin - dsp_frm_addr <= dsp_frm_addr_next; - end - end - end + wire [1:0] port_sel_bits = PORT_SEL; + + assign data_o = (pkt_len_out == 0) ? {4'b0001, 13'b0, port_sel_bits, 1'b1, tfifo_data[13:0],2'b00} : + (pkt_len_out == 1) ? {4'b0000, dfifo_out_data[31:16],tfifo_data} : + {dfifo_out_data[35:33], 1'b0, dfifo_out_data[31:0] }; - DSP_FRM_STATE_WRITE_HDR: begin - if (out_ready & out_valid) begin - dsp_frm_addr <= dsp_frm_addr_next; - dsp_frm_state <= DSP_FRM_STATE_WRITE; - end - end - - DSP_FRM_STATE_WRITE: begin - if (out_ready & out_valid) begin - if (out_data[33]) begin - dsp_frm_addr <= 0; - dsp_frm_state <= DSP_FRM_STATE_WAIT_SOF; - end - else begin - dsp_frm_addr <= dsp_frm_addr_next; - end - end - end - endcase //dsp_frm_state - end - -endmodule //dsp_framer36 + assign src_rdy_o = dfifo_out_src_rdy & tfifo_out_src_rdy; + +endmodule // dsp_framer36 diff --git a/fpga/usrp2/fifo/fifo18_to_fifo36.v b/fpga/usrp2/fifo/fifo18_to_fifo36.v deleted file mode 100644 index 25bb215a1..000000000 --- a/fpga/usrp2/fifo/fifo18_to_fifo36.v +++ /dev/null @@ -1,20 +0,0 @@ - -// For now just assume FIFO18 is same as FIFO19 without occupancy bit - -module fifo18_to_fifo36 - (input clk, input reset, input clear, - input [17:0] f18_datain, - input f18_src_rdy_i, - output f18_dst_rdy_o, - - output [35:0] f36_dataout, - output f36_src_rdy_o, - input f36_dst_rdy_i - ); - - fifo19_to_fifo36 fifo19_to_fifo36 - (.clk(clk), .reset(reset), .clear(clear), - .f19_datain({1'b0,f18_datain}), .f19_src_rdy_i(f18_src_rdy_i), .f19_dst_rdy_o(f18_dst_rdy_o), - .f36_dataout(f36_dataout), .f36_src_rdy_o(f36_src_rdy_o), .f36_dst_rdy_i(f36_dst_rdy_i) ); - -endmodule // fifo18_to_fifo36 diff --git a/fpga/usrp2/fifo/fifo19_to_fifo36.v b/fpga/usrp2/fifo/fifo19_to_fifo36.v index ae2edddc7..502821435 100644 --- a/fpga/usrp2/fifo/fifo19_to_fifo36.v +++ b/fpga/usrp2/fifo/fifo19_to_fifo36.v @@ -15,60 +15,73 @@ module fifo19_to_fifo36 input f36_dst_rdy_i, output [31:0] debug ); - - reg f36_sof, f36_eof; - reg [1:0] f36_occ; + // Shortfifo on input to guarantee no deadlock + wire [18:0] f19_data_int; + wire f19_src_rdy_int, f19_dst_rdy_int; + + fifo_short #(.WIDTH(19)) head_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f19_datain), .src_rdy_i(f19_src_rdy_i), .dst_rdy_o(f19_dst_rdy_o), + .dataout(f19_data_int), .src_rdy_o(f19_src_rdy_int), .dst_rdy_i(f19_dst_rdy_int), + .space(),.occupied() ); + + // Actual f19 to f36 which could deadlock if not connected to shortfifos + reg f36_sof_int, f36_eof_int; + reg [1:0] f36_occ_int; + wire [35:0] f36_data_int; + wire f36_src_rdy_int, f36_dst_rdy_int; + reg [1:0] state; reg [15:0] dat0, dat1; - wire f19_sof = f19_datain[16]; - wire f19_eof = f19_datain[17]; - wire f19_occ = f19_datain[18]; + wire f19_sof_int = f19_data_int[16]; + wire f19_eof_int = f19_data_int[17]; + wire f19_occ_int = f19_data_int[18]; - wire xfer_out = f36_src_rdy_o & f36_dst_rdy_i; + wire xfer_out = f36_src_rdy_int & f36_dst_rdy_int; always @(posedge clk) - if(f19_src_rdy_i & ((state==0)|xfer_out)) - f36_sof <= f19_sof; + if(f19_src_rdy_int & ((state==0)|xfer_out)) + f36_sof_int <= f19_sof_int; always @(posedge clk) - if(f19_src_rdy_i & ((state != 2)|xfer_out)) - f36_eof <= f19_eof; + if(f19_src_rdy_int & ((state != 2)|xfer_out)) + f36_eof_int <= f19_eof_int; always @(posedge clk) if(reset) begin state <= 0; - f36_occ <= 0; + f36_occ_int <= 0; end else - if(f19_src_rdy_i) + if(f19_src_rdy_int) case(state) 0 : begin - dat0 <= f19_datain; - if(f19_eof) + dat0 <= f19_data_int; + if(f19_eof_int) begin state <= 2; - f36_occ <= f19_occ ? 2'b01 : 2'b10; + f36_occ_int <= f19_occ_int ? 2'b01 : 2'b10; end else state <= 1; end 1 : begin - dat1 <= f19_datain; + dat1 <= f19_data_int; state <= 2; - if(f19_eof) - f36_occ <= f19_occ ? 2'b11 : 2'b00; + if(f19_eof_int) + f36_occ_int <= f19_occ_int ? 2'b11 : 2'b00; end 2 : if(xfer_out) begin - dat0 <= f19_datain; - if(f19_eof) // remain in state 2 if we are at eof - f36_occ <= f19_occ ? 2'b01 : 2'b10; + dat0 <= f19_data_int; + if(f19_eof_int) // remain in state 2 if we are at eof + f36_occ_int <= f19_occ_int ? 2'b01 : 2'b10; else state <= 1; end @@ -77,14 +90,21 @@ module fifo19_to_fifo36 if(xfer_out) begin state <= 0; - f36_occ <= 0; + f36_occ_int <= 0; end - assign f19_dst_rdy_o = xfer_out | (state != 2); - assign f36_dataout = LE ? {f36_occ,f36_eof,f36_sof,dat1,dat0} : - {f36_occ,f36_eof,f36_sof,dat0,dat1}; - assign f36_src_rdy_o = (state == 2); + assign f19_dst_rdy_int = xfer_out | (state != 2); + assign f36_data_int = LE ? {f36_occ_int,f36_eof_int,f36_sof_int,dat1,dat0} : + {f36_occ_int,f36_eof_int,f36_sof_int,dat0,dat1}; + assign f36_src_rdy_int = (state == 2); assign debug = state; + + // Shortfifo on output to guarantee no deadlock + fifo_short #(.WIDTH(36)) tail_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f36_data_int), .src_rdy_i(f36_src_rdy_int), .dst_rdy_o(f36_dst_rdy_int), + .dataout(f36_dataout), .src_rdy_o(f36_src_rdy_o), .dst_rdy_i(f36_dst_rdy_i), + .space(),.occupied() ); endmodule // fifo19_to_fifo36 diff --git a/fpga/usrp2/fifo/fifo36_mux.v b/fpga/usrp2/fifo/fifo36_mux.v index c6fd40f27..7f0f803ff 100644 --- a/fpga/usrp2/fifo/fifo36_mux.v +++ b/fpga/usrp2/fifo/fifo36_mux.v @@ -10,6 +10,19 @@ module fifo36_mux input [35:0] data1_i, input src1_rdy_i, output dst1_rdy_o, output [35:0] data_o, output src_rdy_o, input dst_rdy_i); + wire [35:0] data0_int, data1_int; + wire src0_rdy_int, dst0_rdy_int, src1_rdy_int, dst1_rdy_int; + + fifo_short #(.WIDTH(36)) mux_fifo_in0 + (.clk(clk), .reset(reset), .clear(clear), + .datain(data0_i), .src_rdy_i(src0_rdy_i), .dst_rdy_o(dst0_rdy_o), + .dataout(data0_int), .src_rdy_o(src0_rdy_int), .dst_rdy_i(dst0_rdy_int)); + + fifo_short #(.WIDTH(36)) mux_fifo_in1 + (.clk(clk), .reset(reset), .clear(clear), + .datain(data1_i), .src_rdy_i(src1_rdy_i), .dst_rdy_o(dst1_rdy_o), + .dataout(data1_int), .src_rdy_o(src1_rdy_int), .dst_rdy_i(dst1_rdy_int)); + localparam MUX_IDLE0 = 0; localparam MUX_DATA0 = 1; localparam MUX_IDLE1 = 2; @@ -17,8 +30,8 @@ module fifo36_mux reg [1:0] state; - wire eof0 = data0_i[33]; - wire eof1 = data1_i[33]; + wire eof0 = data0_int[33]; + wire eof1 = data1_int[33]; wire [35:0] data_int; wire src_rdy_int, dst_rdy_int; @@ -29,33 +42,33 @@ module fifo36_mux else case(state) MUX_IDLE0 : - if(src0_rdy_i) + if(src0_rdy_int) state <= MUX_DATA0; - else if(src1_rdy_i) + else if(src1_rdy_int) state <= MUX_DATA1; MUX_DATA0 : - if(src0_rdy_i & dst_rdy_int & eof0) + if(src0_rdy_int & dst_rdy_int & eof0) state <= prio ? MUX_IDLE0 : MUX_IDLE1; MUX_IDLE1 : - if(src1_rdy_i) + if(src1_rdy_int) state <= MUX_DATA1; - else if(src0_rdy_i) + else if(src0_rdy_int) state <= MUX_DATA0; MUX_DATA1 : - if(src1_rdy_i & dst_rdy_int & eof1) + if(src1_rdy_int & dst_rdy_int & eof1) state <= MUX_IDLE0; default : state <= MUX_IDLE0; endcase // case (state) - assign dst0_rdy_o = (state==MUX_DATA0) ? dst_rdy_int : 0; - assign dst1_rdy_o = (state==MUX_DATA1) ? dst_rdy_int : 0; - assign src_rdy_int = (state==MUX_DATA0) ? src0_rdy_i : (state==MUX_DATA1) ? src1_rdy_i : 0; - assign data_int = (state==MUX_DATA0) ? data0_i : data1_i; + assign dst0_rdy_int = (state==MUX_DATA0) ? dst_rdy_int : 0; + assign dst1_rdy_int = (state==MUX_DATA1) ? dst_rdy_int : 0; + assign src_rdy_int = (state==MUX_DATA0) ? src0_rdy_int : (state==MUX_DATA1) ? src1_rdy_int : 0; + assign data_int = (state==MUX_DATA0) ? data0_int : data1_int; fifo_short #(.WIDTH(36)) mux_fifo (.clk(clk), .reset(reset), .clear(clear), diff --git a/fpga/usrp2/fifo/fifo36_to_fifo19.v b/fpga/usrp2/fifo/fifo36_to_fifo19.v index e016fe2c6..0e9b2d442 100644 --- a/fpga/usrp2/fifo/fifo36_to_fifo19.v +++ b/fpga/usrp2/fifo/fifo36_to_fifo19.v @@ -13,25 +13,37 @@ module fifo36_to_fifo19 output [18:0] f19_dataout, output f19_src_rdy_o, input f19_dst_rdy_i ); - - wire f36_sof = f36_datain[32]; - wire f36_eof = f36_datain[33]; - wire [1:0] f36_occ = f36_datain[35:34]; + + wire [18:0] f19_data_int; + wire f19_src_rdy_int, f19_dst_rdy_int; + wire [35:0] f36_data_int; + wire f36_src_rdy_int, f36_dst_rdy_int; + + // Shortfifo on input to guarantee no deadlock + fifo_short #(.WIDTH(36)) head_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f36_datain), .src_rdy_i(f36_src_rdy_i), .dst_rdy_o(f36_dst_rdy_o), + .dataout(f36_data_int), .src_rdy_o(f36_src_rdy_int), .dst_rdy_i(f36_dst_rdy_int), + .space(),.occupied() ); + + // Main fifo36_to_fifo19, needs shortfifos to guarantee no deadlock + wire [1:0] f36_occ_int = f36_data_int[35:34]; + wire f36_sof_int = f36_data_int[32]; + wire f36_eof_int = f36_data_int[33]; reg phase; + wire half_line = f36_eof_int & ((f36_occ_int==1)|(f36_occ_int==2)); - wire half_line = f36_eof & ((f36_occ==1)|(f36_occ==2)); - - assign f19_dataout[15:0] = (LE ^ phase) ? f36_datain[15:0] : f36_datain[31:16]; - assign f19_dataout[16] = phase ? 0 : f36_sof; - assign f19_dataout[17] = phase ? f36_eof : half_line; - assign f19_dataout[18] = f19_dataout[17] & ((f36_occ==1)|(f36_occ==3)); + assign f19_data_int[15:0] = (LE ^ phase) ? f36_data_int[15:0] : f36_data_int[31:16]; + assign f19_data_int[16] = phase ? 0 : f36_sof_int; + assign f19_data_int[17] = phase ? f36_eof_int : half_line; + assign f19_data_int[18] = f19_data_int[17] & ((f36_occ_int==1)|(f36_occ_int==3)); - assign f19_src_rdy_o = f36_src_rdy_i; - assign f36_dst_rdy_o = (phase | half_line) & f19_dst_rdy_i; + assign f19_src_rdy_int = f36_src_rdy_int; + assign f36_dst_rdy_int = (phase | half_line) & f19_dst_rdy_int; - wire f19_xfer = f19_src_rdy_o & f19_dst_rdy_i; - wire f36_xfer = f36_src_rdy_i & f36_dst_rdy_o; + wire f19_xfer = f19_src_rdy_int & f19_dst_rdy_int; + wire f36_xfer = f36_src_rdy_int & f36_dst_rdy_int; always @(posedge clk) if(reset) @@ -41,5 +53,11 @@ module fifo36_to_fifo19 else if(f19_xfer) phase <= 1; - + // Shortfifo on output to guarantee no deadlock + fifo_short #(.WIDTH(19)) tail_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f19_data_int), .src_rdy_i(f19_src_rdy_int), .dst_rdy_o(f19_dst_rdy_int), + .dataout(f19_dataout), .src_rdy_o(f19_src_rdy_o), .dst_rdy_i(f19_dst_rdy_i), + .space(),.occupied() ); + endmodule // fifo36_to_fifo19 diff --git a/fpga/usrp2/fifo/fifo36_to_fifo72.v b/fpga/usrp2/fifo/fifo36_to_fifo72.v new file mode 100644 index 000000000..038eda9e9 --- /dev/null +++ b/fpga/usrp2/fifo/fifo36_to_fifo72.v @@ -0,0 +1,125 @@ + +// Parameter LE tells us if we are little-endian. +// Little-endian means send lower 16 bits first. +// Default is big endian (network order), send upper bits first. + +module fifo36_to_fifo72 + #(parameter LE=0) + (input clk, input reset, input clear, + input [35:0] f36_datain, + input f36_src_rdy_i, + output f36_dst_rdy_o, + + output [71:0] f72_dataout, + output f72_src_rdy_o, + input f72_dst_rdy_i, + output [31:0] debug + ); + + // Shortfifo on input to guarantee no deadlock + wire [35:0] f36_data_int; + wire f36_src_rdy_int, f36_dst_rdy_int; + + fifo_short #(.WIDTH(36)) head_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f36_datain), .src_rdy_i(f36_src_rdy_i), .dst_rdy_o(f36_dst_rdy_o), + .dataout(f36_data_int), .src_rdy_o(f36_src_rdy_int), .dst_rdy_i(f36_dst_rdy_int), + .space(),.occupied() ); + + // Actual f36 to f72 which could deadlock if not connected to shortfifos + reg f72_sof_int, f72_eof_int; + reg [2:0] f72_occ_int; + wire [71:0] f72_data_int; + wire f72_src_rdy_int, f72_dst_rdy_int; + + reg [1:0] state; + reg [31:0] dat0, dat1; + + wire f36_sof_int = f36_data_int[32]; + wire f36_eof_int = f36_data_int[33]; + wire [1:0] f36_occ_int = f36_data_int[35:34]; + + wire xfer_out = f72_src_rdy_int & f72_dst_rdy_int; + + always @(posedge clk) + if(f36_src_rdy_int & ((state==0)|xfer_out)) + f72_sof_int <= f36_sof_int; + + always @(posedge clk) + if(f36_src_rdy_int & ((state != 2)|xfer_out)) + f72_eof_int <= f36_eof_int; + + always @(posedge clk) + if(reset) + begin + state <= 0; + f72_occ_int <= 0; + end + else + if(f36_src_rdy_int) + case(state) + 0 : + begin + dat0 <= f36_data_int; + if(f36_eof_int) + begin + state <= 2; + case (f36_occ_int) + 0 : f72_occ_int <= 3'd4; + 1 : f72_occ_int <= 3'd1; + 2 : f72_occ_int <= 3'd2; + 3 : f72_occ_int <= 3'd3; + endcase // case (f36_occ_int) + end + else + state <= 1; + end + 1 : + begin + dat1 <= f36_data_int; + state <= 2; + if(f36_eof_int) + case (f36_occ_int) + 0 : f72_occ_int <= 3'd0; + 1 : f72_occ_int <= 3'd5; + 2 : f72_occ_int <= 3'd6; + 3 : f72_occ_int <= 3'd7; + endcase // case (f36_occ_int) + end + 2 : + if(xfer_out) + begin + dat0 <= f36_data_int; + if(f36_eof_int) // remain in state 2 if we are at eof + case (f36_occ_int) + 0 : f72_occ_int <= 3'd4; + 1 : f72_occ_int <= 3'd1; + 2 : f72_occ_int <= 3'd2; + 3 : f72_occ_int <= 3'd3; + endcase // case (f36_occ_int) + else + state <= 1; + end + endcase // case(state) + else + if(xfer_out) + begin + state <= 0; + f72_occ_int <= 0; + end + + assign f36_dst_rdy_int = xfer_out | (state != 2); + assign f72_data_int = LE ? {3'b000,f72_occ_int[2:0],f72_eof_int,f72_sof_int,dat1,dat0} : + {3'b000,f72_occ_int[2:0],f72_eof_int,f72_sof_int,dat0,dat1}; + assign f72_src_rdy_int = (state == 2); + + assign debug = state; + + // Shortfifo on output to guarantee no deadlock + fifo_short #(.WIDTH(72)) tail_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f72_data_int), .src_rdy_i(f72_src_rdy_int), .dst_rdy_o(f72_dst_rdy_int), + .dataout(f72_dataout), .src_rdy_o(f72_src_rdy_o), .dst_rdy_i(f72_dst_rdy_i), + .space(),.occupied() ); + +endmodule // fifo36_to_fifo72 diff --git a/fpga/usrp2/fifo/fifo36_to_ll8.v b/fpga/usrp2/fifo/fifo36_to_ll8.v index 9604d0e38..390e49962 100644 --- a/fpga/usrp2/fifo/fifo36_to_ll8.v +++ b/fpga/usrp2/fifo/fifo36_to_ll8.v @@ -5,25 +5,33 @@ module fifo36_to_ll8 input f36_src_rdy_i, output f36_dst_rdy_o, - output reg [7:0] ll_data, - output ll_sof_n, - output ll_eof_n, - output ll_src_rdy_n, - input ll_dst_rdy_n, + output [7:0] ll_data, + output ll_sof, + output ll_eof, + output ll_src_rdy, + input ll_dst_rdy, output [31:0] debug); - wire ll_sof, ll_eof, ll_src_rdy; - assign ll_sof_n = ~ll_sof; - assign ll_eof_n = ~ll_eof; - assign ll_src_rdy_n = ~ll_src_rdy; - wire ll_dst_rdy = ~ll_dst_rdy_n; - - wire f36_sof = f36_data[32]; - wire f36_eof = f36_data[33]; - wire f36_occ = f36_data[35:34]; - wire advance, end_early; - reg [1:0] state; + // Shortfifo on input to guarantee no deadlock + wire [35:0] f36_data_int; + wire f36_src_rdy_int, f36_dst_rdy_int; + reg [7:0] ll_data_int; + wire ll_sof_int, ll_eof_int, ll_src_rdy_int, ll_dst_rdy_int; + + fifo_short #(.WIDTH(36)) head_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f36_data), .src_rdy_i(f36_src_rdy_i), .dst_rdy_o(f36_dst_rdy_o), + .dataout(f36_data_int), .src_rdy_o(f36_src_rdy_int), .dst_rdy_i(f36_dst_rdy_int), + .space(),.occupied() ); + + // Actual fifo36 to ll8, can deadlock if not connected to shortfifo + wire [1:0] f36_occ_int = f36_data_int[35:34]; + wire f36_sof_int = f36_data_int[32]; + wire f36_eof_int = f36_data_int[33]; + wire advance, end_early; + reg [1:0] state; + assign debug = {29'b0,state}; always @(posedge clk) @@ -31,29 +39,37 @@ module fifo36_to_ll8 state <= 0; else if(advance) - if(ll_eof) + if(ll_eof_int) state <= 0; else state <= state + 1; always @* case(state) - 0 : ll_data = f36_data[31:24]; - 1 : ll_data = f36_data[23:16]; - 2 : ll_data = f36_data[15:8]; - 3 : ll_data = f36_data[7:0]; - default : ll_data = f36_data[31:24]; + 0 : ll_data_int = f36_data_int[31:24]; + 1 : ll_data_int = f36_data_int[23:16]; + 2 : ll_data_int = f36_data_int[15:8]; + 3 : ll_data_int = f36_data_int[7:0]; + default : ll_data_int = f36_data_int[31:24]; endcase // case (state) - assign ll_sof = (state==0) & f36_sof; - assign ll_eof = f36_eof & (((state==0)&(f36_occ==1)) | - ((state==1)&(f36_occ==2)) | - ((state==2)&(f36_occ==3)) | - (state==3)); + assign ll_sof_int = (state==0) & f36_sof_int; + assign ll_eof_int = f36_eof_int & (((state==0)&(f36_occ_int==1)) | + ((state==1)&(f36_occ_int==2)) | + ((state==2)&(f36_occ_int==3)) | + (state==3)); - assign ll_src_rdy = f36_src_rdy_i; - - assign advance = ll_src_rdy & ll_dst_rdy; - assign f36_dst_rdy_o = advance & ((state==3)|ll_eof); + assign ll_src_rdy_int = f36_src_rdy_int; -endmodule // ll8_to_fifo36 + assign advance = ll_src_rdy_int & ll_dst_rdy_int; + assign f36_dst_rdy_int= advance & ((state==3)|ll_eof_int); + + // Short FIFO on output to guarantee no deadlock + ll8_shortfifo tail_fifo + (.clk(clk), .reset(reset), .clear(clear), + .datain(ll_data_int), .sof_i(ll_sof_int), .eof_i(ll_eof_int), + .error_i(0), .src_rdy_i(ll_src_rdy_int), .dst_rdy_o(ll_dst_rdy_int), + .dataout(ll_data), .sof_o(ll_sof), .eof_o(ll_eof), + .error_o(), .src_rdy_o(ll_src_rdy), .dst_rdy_i(ll_dst_rdy)); + +endmodule // fifo36_to_ll8 diff --git a/fpga/usrp2/fifo/fifo72_to_fifo36.v b/fpga/usrp2/fifo/fifo72_to_fifo36.v new file mode 100644 index 000000000..1b3bc3ab7 --- /dev/null +++ b/fpga/usrp2/fifo/fifo72_to_fifo36.v @@ -0,0 +1,63 @@ + +// Parameter LE tells us if we are little-endian. +// Little-endian means send lower 16 bits first. +// Default is big endian (network order), send upper bits first. + +module fifo72_to_fifo36 + #(parameter LE=0) + (input clk, input reset, input clear, + input [71:0] f72_datain, + input f72_src_rdy_i, + output f72_dst_rdy_o, + + output [35:0] f36_dataout, + output f36_src_rdy_o, + input f36_dst_rdy_i ); + + wire [35:0] f36_data_int; + wire f36_src_rdy_int, f36_dst_rdy_int; + wire [71:0] f72_data_int; + wire f72_src_rdy_int, f72_dst_rdy_int; + + // Shortfifo on input to guarantee no deadlock + fifo_short #(.WIDTH(72)) head_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f72_datain), .src_rdy_i(f72_src_rdy_i), .dst_rdy_o(f72_dst_rdy_o), + .dataout(f72_data_int), .src_rdy_o(f72_src_rdy_int), .dst_rdy_i(f72_dst_rdy_int), + .space(),.occupied() ); + + // Main fifo72_to_fifo36, needs shortfifos to guarantee no deadlock + wire [2:0] f72_occ_int = f72_data_int[68:66]; + wire f72_sof_int = f72_data_int[64]; + wire f72_eof_int = f72_data_int[65]; + + reg phase; + wire half_line = f72_eof_int & ( (f72_occ_int==1)|(f72_occ_int==2)|(f72_occ_int==3)|(f72_occ_int==4) ); + + assign f36_data_int[31:0] = (LE ^ phase) ? f72_data_int[31:0] : f72_data_int[63:32]; + assign f36_data_int[32] = phase ? 0 : f72_sof_int; + assign f36_data_int[33] = phase ? f72_eof_int : half_line; + assign f36_data_int[35:34] = f36_data_int[33] ? f72_occ_int[1:0] : 2'b00; + + assign f36_src_rdy_int = f72_src_rdy_int; + assign f72_dst_rdy_int = (phase | half_line) & f36_dst_rdy_int; + + wire f36_xfer = f36_src_rdy_int & f36_dst_rdy_int; + wire f72_xfer = f72_src_rdy_int & f72_dst_rdy_int; + + always @(posedge clk) + if(reset) + phase <= 0; + else if(f72_xfer) + phase <= 0; + else if(f36_xfer) + phase <= 1; + + // Shortfifo on output to guarantee no deadlock + fifo_short #(.WIDTH(36)) tail_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f36_data_int), .src_rdy_i(f36_src_rdy_int), .dst_rdy_o(f36_dst_rdy_int), + .dataout(f36_dataout), .src_rdy_o(f36_src_rdy_o), .dst_rdy_i(f36_dst_rdy_i), + .space(),.occupied() ); + +endmodule // fifo72_to_fifo36 diff --git a/fpga/usrp2/control_lib/newfifo/fifo_pacer.v b/fpga/usrp2/fifo/fifo_pacer.v index 1bf03ab6e..1bf03ab6e 100644 --- a/fpga/usrp2/control_lib/newfifo/fifo_pacer.v +++ b/fpga/usrp2/fifo/fifo_pacer.v diff --git a/fpga/usrp2/fifo/fifo_tb.v b/fpga/usrp2/fifo/fifo_tb.v index 327da4700..3e2862a70 100644 --- a/fpga/usrp2/fifo/fifo_tb.v +++ b/fpga/usrp2/fifo/fifo_tb.v @@ -1,4 +1,4 @@ -module fifo_new_tb(); +module fifo_tb(); reg clk = 0; reg rst = 1; @@ -9,169 +9,47 @@ module fifo_new_tb(); reg [31:0] f36_data = 0; reg [1:0] f36_occ = 0; reg f36_sof = 0, f36_eof = 0; - - wire [35:0] f36_in = {f36_occ,f36_eof,f36_sof,f36_data}; - reg src_rdy_f36i = 0; - wire dst_rdy_f36i; - - wire [35:0] f36_out, f36_out2; - wire src_rdy_f36o; - reg dst_rdy_f36o = 0; - - //fifo_cascade #(.WIDTH(36), .SIZE(4)) fifo_cascade36 - //fifo_long #(.WIDTH(36), .SIZE(4)) fifo_cascade36 - - wire i1_sr, i1_dr; - wire i2_sr, i2_dr; - wire i3_sr, i3_dr; - wire i7_sr, i7_dr; - - reg i4_dr = 0; - wire i4_sr; - - wire [35:0] i1, i4, i7; - wire [18:0] i2, i3; + reg f36_src_rdy; + wire f36_dst_rdy; wire [7:0] ll_data; - wire ll_src_rdy_n, ll_dst_rdy_n, ll_sof_n, ll_eof_n; + wire ll_src_rdy, ll_dst_rdy, ll_sof, ll_eof; wire [35:0] err_dat; wire err_src_rdy, err_dst_rdy; - reg trigger = 0; - initial #10000 trigger = 1; - - fifo_short #(.WIDTH(36)) fifo_short1 + fifo36_to_ll8 fifo36_to_ll8 (.clk(clk),.reset(rst),.clear(clear), - .datain(f36_in),.src_rdy_i(src_rdy_f36i),.dst_rdy_o(dst_rdy_f36i), - .dataout(i7),.src_rdy_o(i7_sr),.dst_rdy_i(i7_dr) ); + .f36_data({f36_occ,f36_eof,f36_sof,f36_data}),.f36_src_rdy_i(f36_src_rdy),.f36_dst_rdy_o(f36_dst_rdy), + .ll_data(ll_data),.ll_sof(ll_sof),.ll_eof(ll_eof), + .ll_src_rdy(ll_src_rdy),.ll_dst_rdy(ll_dst_rdy)); - gen_context_pkt #(.PROT_ENG_FLAGS(1)) gcp - (.clk(clk),.reset(rst),.clear(clear), - .trigger(trigger), .sent(), - .streamid(32'hDEAD_F00D), .vita_time(64'h01234567_89ABCDEF), .message(32'hBEEF_2940), - .data_o(err_dat), .src_rdy_o(err_src_rdy), .dst_rdy_i(err_dst_rdy)); - - fifo36_mux #(.prio(0)) fifo36_mux - (.clk(clk), .reset(rst), .clear(clear), - .data0_i(i7), .src0_rdy_i(i7_sr), .dst0_rdy_o(i7_dr), - .data1_i(err_dat), .src1_rdy_i(err_src_rdy), .dst1_rdy_o(err_dst_rdy), - .data_o(i1), .src_rdy_o(i1_sr), .dst_rdy_i(i1_dr)); + assign ll_dst_rdy = 1; - fifo36_to_fifo19 fifo36_to_fifo19 - (.clk(clk),.reset(rst),.clear(clear), - .f36_datain(i1),.f36_src_rdy_i(i1_sr),.f36_dst_rdy_o(i1_dr), - .f19_dataout(i2),.f19_src_rdy_o(i2_sr),.f19_dst_rdy_i(i2_dr) ); - - fifo19_to_ll8 fifo19_to_ll8 - (.clk(clk),.reset(rst),.clear(clear), - .f19_data(i2),.f19_src_rdy_i(i2_sr),.f19_dst_rdy_o(i2_dr), - .ll_data(ll_data),.ll_sof_n(ll_sof_n),.ll_eof_n(ll_eof_n), - .ll_src_rdy_n(ll_src_rdy_n),.ll_dst_rdy_n(ll_dst_rdy_n)); - - ll8_to_fifo19 ll8_to_fifo19 - (.clk(clk),.reset(rst),.clear(clear), - .ll_data(ll_data),.ll_sof_n(ll_sof_n),.ll_eof_n(ll_eof_n), - .ll_src_rdy_n(ll_src_rdy_n),.ll_dst_rdy_n(ll_dst_rdy_n), - .f19_data(i3),.f19_src_rdy_o(i3_sr),.f19_dst_rdy_i(i3_dr) ); - - fifo19_to_fifo36 fifo19_to_fifo36 - (.clk(clk),.reset(rst),.clear(clear), - .f19_datain(i3),.f19_src_rdy_i(i3_sr),.f19_dst_rdy_o(i3_dr), - .f36_dataout(i4),.f36_src_rdy_o(i4_sr),.f36_dst_rdy_i(i4_dr) ); - - task ReadFromFIFO36; - begin - $display("Read from FIFO36"); - #1 i4_dr <= 1; - while(1) - begin - while(~i4_sr) - @(posedge clk); - $display("Read: %h",i4); - @(posedge clk); - end - end - endtask // ReadFromFIFO36 - - reg [15:0] count; - task PutPacketInFIFO36; - input [31:0] data_start; - input [31:0] data_len; - begin - count <= 4; - src_rdy_f36i <= 1; - f36_data <= data_start; - f36_sof <= 1; - f36_eof <= 0; - f36_occ <= 0; - - $display("Put Packet in FIFO36"); - while(~dst_rdy_f36i) - @(posedge clk); - @(posedge clk); - $display("PPI_FIFO36: Entered First Line"); - f36_sof <= 0; - while(count+4 < data_len) - begin - f36_data <= f36_data + 32'h01010101; - count <= count + 4; - while(~dst_rdy_f36i) - @(posedge clk); - @(posedge clk); - $display("PPI_FIFO36: Entered New Line"); - end - f36_data <= f36_data + 32'h01010101; - f36_eof <= 1; - if(count + 4 == data_len) - f36_occ <= 0; - else if(count + 3 == data_len) - f36_occ <= 3; - else if(count + 2 == data_len) - f36_occ <= 2; - else - f36_occ <= 1; - while(~dst_rdy_f36i) - @(posedge clk); - @(posedge clk); - f36_occ <= 0; - f36_eof <= 0; - f36_data <= 0; - src_rdy_f36i <= 0; - $display("PPI_FIFO36: Entered Last Line"); - end - endtask // PutPacketInFIFO36 + always @(posedge clk) + if(ll_src_rdy) + $display("LL: SOF %d, EOF %d, DAT %x",ll_sof,ll_eof,ll_data); - initial $dumpfile("fifo_new_tb.vcd"); - initial $dumpvars(0,fifo_new_tb); + initial $dumpfile("fifo_tb.vcd"); + initial $dumpvars(0,fifo_tb); initial begin @(negedge rst); - //#10000; @(posedge clk); @(posedge clk); @(posedge clk); @(posedge clk); - ReadFromFIFO36; - end - - initial - begin - @(negedge rst); - @(posedge clk); - @(posedge clk); - PutPacketInFIFO36(32'hA0B0C0D0,12); - @(posedge clk); - @(posedge clk); - #10000; - @(posedge clk); - PutPacketInFIFO36(32'hE0F0A0B0,36); - @(posedge clk); + f36_src_rdy <= 1; + {f36_occ,f36_eof,f36_sof,f36_data} <= { 2'b00,1'b0,1'b1,32'h00010203}; @(posedge clk); + {f36_occ,f36_eof,f36_sof,f36_data} <= { 2'b00,1'b0,1'b0,32'h04050607}; @(posedge clk); + {f36_occ,f36_eof,f36_sof,f36_data} <= { 2'b00,1'b0,1'b0,32'h08090a0b}; @(posedge clk); + {f36_occ,f36_eof,f36_sof,f36_data} <= { 2'b11,1'b1,1'b0,32'h0c0d0e0f}; @(posedge clk); + f36_src_rdy <= 0; end - - initial #20000 $finish; + + initial #4000 $finish; endmodule // longfifo_tb diff --git a/fpga/usrp2/fifo/ll8_to_fifo19.v b/fpga/usrp2/fifo/ll8_to_fifo19.v index af3b91afb..ac8ac19a6 100644 --- a/fpga/usrp2/fifo/ll8_to_fifo19.v +++ b/fpga/usrp2/fifo/ll8_to_fifo19.v @@ -2,41 +2,47 @@ module ll8_to_fifo19 (input clk, input reset, input clear, input [7:0] ll_data, - input ll_sof_n, - input ll_eof_n, - input ll_src_rdy_n, - output ll_dst_rdy_n, + input ll_sof, + input ll_eof, + input ll_src_rdy, + output ll_dst_rdy, output [18:0] f19_data, output f19_src_rdy_o, input f19_dst_rdy_i ); + + // Short FIFO on input to guarantee no deadlock + wire [7:0] ll_data_int; + wire ll_sof_int, ll_eof_int, ll_src_rdy_int, ll_dst_rdy_int; + ll8_shortfifo head_fifo + (.clk(clk), .reset(reset), .clear(clear), + .datain(ll_data), .sof_i(ll_sof), .eof_i(ll_eof), + .error_i(0), .src_rdy_i(ll_src_rdy), .dst_rdy_o(ll_dst_rdy), + .dataout(ll_data_int), .sof_o(ll_sof_int), .eof_o(ll_eof_int), + .error_o(), .src_rdy_o(ll_src_rdy_int), .dst_rdy_i(ll_dst_rdy_int)); + + // Actual ll8_to_fifo19 which could deadlock if not connected to a shortfifo localparam XFER_EMPTY = 0; localparam XFER_HALF = 1; localparam XFER_HALF_WRITE = 3; - // Why anybody would use active low in an FPGA is beyond me... - wire ll_sof = ~ll_sof_n; - wire ll_eof = ~ll_eof_n; - wire ll_src_rdy = ~ll_src_rdy_n; - wire ll_dst_rdy; - assign ll_dst_rdy_n = ~ll_dst_rdy; - - wire xfer_out = f19_src_rdy_o & f19_dst_rdy_i; - wire xfer_in = ll_src_rdy & ll_dst_rdy; - - reg hold_sof; - wire f19_sof, f19_eof, f19_occ; + wire [18:0] f19_data_int; + wire f19_sof_int, f19_eof_int, f19_occ_int, f19_src_rdy_int, f19_dst_rdy_int; + + wire xfer_out = f19_src_rdy_int & f19_dst_rdy_int; + wire xfer_in = ll_src_rdy_int & ll_dst_rdy_int; + reg hold_sof; - reg [1:0] state; - reg [7:0] hold_reg; + reg [1:0] state; + reg [7:0] hold_reg; always @(posedge clk) - if(ll_src_rdy & (state==XFER_EMPTY)) - hold_reg <= ll_data; + if(ll_src_rdy_int & (state==XFER_EMPTY)) + hold_reg <= ll_data_int; always @(posedge clk) - if(ll_sof & (state==XFER_EMPTY)) + if(ll_sof_int & (state==XFER_EMPTY)) hold_sof <= 1; else if(xfer_out) hold_sof <= 0; @@ -47,27 +53,35 @@ module ll8_to_fifo19 else case(state) XFER_EMPTY : - if(ll_src_rdy) - if(ll_eof) + if(ll_src_rdy_int) + if(ll_eof_int) state <= XFER_HALF_WRITE; else state <= XFER_HALF; XFER_HALF : - if(ll_src_rdy & f19_dst_rdy_i) + if(ll_src_rdy_int & f19_dst_rdy_int) state <= XFER_EMPTY; XFER_HALF_WRITE : - if(f19_dst_rdy_i) + if(f19_dst_rdy_int) state <= XFER_EMPTY; endcase // case (state) - assign ll_dst_rdy = (state==XFER_EMPTY) | ((state==XFER_HALF)&f19_dst_rdy_i); - assign f19_src_rdy_o = (state==XFER_HALF_WRITE) | ((state==XFER_HALF)&ll_src_rdy); + assign ll_dst_rdy_int = (state==XFER_EMPTY) | ((state==XFER_HALF)&f19_dst_rdy_int); + assign f19_src_rdy_int= (state==XFER_HALF_WRITE) | ((state==XFER_HALF)&ll_src_rdy_int); - assign f19_sof = hold_sof | (ll_sof & (state==XFER_HALF)); - assign f19_eof = (state == XFER_HALF_WRITE) | ll_eof; - assign f19_occ = (state == XFER_HALF_WRITE); + assign f19_sof_int = hold_sof | (ll_sof_int & (state==XFER_HALF)); + assign f19_eof_int = (state == XFER_HALF_WRITE) | ll_eof_int; + assign f19_occ_int = (state == XFER_HALF_WRITE); - assign f19_data = {f19_occ,f19_eof,f19_sof,hold_reg,ll_data}; + assign f19_data_int = {f19_occ_int,f19_eof_int,f19_sof_int,hold_reg,ll_data_int}; + + // Shortfifo on output to guarantee no deadlock + fifo_short #(.WIDTH(19)) tail_fifo + (.clk(clk),.reset(reset),.clear(clear), + .datain(f19_data_int), .src_rdy_i(f19_src_rdy_int), .dst_rdy_o(f19_dst_rdy_int), + .dataout(f19_data), .src_rdy_o(f19_src_rdy_o), .dst_rdy_i(f19_dst_rdy_i), + .space(),.occupied() ); + endmodule // ll8_to_fifo19 diff --git a/fpga/usrp2/control_lib/newfifo/packet32_tb.v b/fpga/usrp2/fifo/packet32_tb.v index 82bb09c29..82bb09c29 100644 --- a/fpga/usrp2/control_lib/newfifo/packet32_tb.v +++ b/fpga/usrp2/fifo/packet32_tb.v diff --git a/fpga/usrp2/fifo/packet_dispatcher36_x3.v b/fpga/usrp2/fifo/packet_dispatcher36_x3.v new file mode 100644 index 000000000..fd762d061 --- /dev/null +++ b/fpga/usrp2/fifo/packet_dispatcher36_x3.v @@ -0,0 +1,270 @@ +// +// Copyright 2011 Ettus Research LLC +// +// Packet dispatcher with fifo36 interface and 3 outputs. +// +// The packet dispatcher expects 2-byte padded ethernet frames. +// The frames will be inspected at ethernet, IPv4, UDP, and VRT layers. +// Packets are dispatched into the following streams: +// * tx dsp stream +// * to cpu stream +// * to external stream +// * to both cpu and external +// +// The following registers are used for dispatcher control: +// * base + 0 = this ipv4 address (32 bits) +// * base + 1 = udp dst port (lower 16 bits) +// + +module packet_dispatcher36_x3 + #( + parameter BASE = 0 + ) + ( + //clocking and reset interface: + input clk, input rst, input clr, + + //setting register interface: + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //input stream interfaces: + input [35:0] com_inp_data, input com_inp_valid, output com_inp_ready, + + //output stream interfaces: + output [35:0] ext_out_data, output ext_out_valid, input ext_out_ready, + output [35:0] dsp_out_data, output dsp_out_valid, input dsp_out_ready, + output [35:0] cpu_out_data, output cpu_out_valid, input cpu_out_ready + ); + + //setting register to program the IP address + wire [31:0] my_ip_addr; + setting_reg #(.my_addr(BASE+0)) sreg_ip_addr( + .clk(clk),.rst(rst), + .strobe(set_stb),.addr(set_addr),.in(set_data), + .out(my_ip_addr),.changed() + ); + + //setting register to program the UDP DSP port + wire [15:0] dsp_udp_port; + setting_reg #(.my_addr(BASE+1), .width(16)) sreg_data_port( + .clk(clk),.rst(rst), + .strobe(set_stb),.addr(set_addr),.in(set_data), + .out(dsp_udp_port),.changed() + ); + + //////////////////////////////////////////////////////////////////// + // Communication input inspector + // - inspect com input and send it to DSP, EXT, CPU, or BOTH + //////////////////////////////////////////////////////////////////// + localparam PD_STATE_READ_COM_PRE = 0; + localparam PD_STATE_READ_COM = 1; + localparam PD_STATE_WRITE_REGS = 2; + localparam PD_STATE_WRITE_LIVE = 3; + + localparam PD_DEST_DSP = 0; + localparam PD_DEST_EXT = 1; + localparam PD_DEST_CPU = 2; + localparam PD_DEST_BOF = 3; + + localparam PD_MAX_NUM_DREGS = 13; //padded_eth + ip + udp + seq + vrt_hdr + localparam PD_DREGS_DSP_OFFSET = 11; //offset to start dsp at + + //output inspector interfaces + wire [35:0] pd_out_dsp_data; + wire pd_out_dsp_valid; + wire pd_out_dsp_ready; + + wire [35:0] pd_out_ext_data; + wire pd_out_ext_valid; + wire pd_out_ext_ready; + + wire [35:0] pd_out_cpu_data; + wire pd_out_cpu_valid; + wire pd_out_cpu_ready; + + wire [35:0] pd_out_bof_data; + wire pd_out_bof_valid; + wire pd_out_bof_ready; + + reg [1:0] pd_state; + reg [1:0] pd_dest; + reg [3:0] pd_dreg_count; //data registers to buffer headers + wire [3:0] pd_dreg_count_next = pd_dreg_count + 1'b1; + wire pd_dreg_counter_done = (pd_dreg_count_next == PD_MAX_NUM_DREGS)? 1'b1 : 1'b0; + reg [35:0] pd_dregs [PD_MAX_NUM_DREGS-1:0]; + + //extract various packet components: + wire [47:0] pd_dregs_eth_dst_mac = {pd_dregs[0][15:0], pd_dregs[1][31:0]}; + wire [15:0] pd_dregs_eth_type = pd_dregs[3][15:0]; + wire [7:0] pd_dregs_ipv4_proto = pd_dregs[6][23:16]; + wire [31:0] pd_dregs_ipv4_dst_addr = pd_dregs[8][31:0]; + wire [15:0] pd_dregs_udp_dst_port = pd_dregs[9][15:0]; + wire [15:0] pd_dregs_vrt_size = com_inp_data[15:0]; + + //Inspector output flags special case: + //Inject SOF into flags at first DSP line. + wire [3:0] pd_out_flags = ( + (pd_dreg_count == PD_DREGS_DSP_OFFSET) && + (pd_dest == PD_DEST_DSP) + )? 4'b0001 : pd_dregs[pd_dreg_count][35:32]; + + //The communication inspector ouput data and valid signals: + //Mux between com input and data registers based on the state. + wire [35:0] pd_out_data = (pd_state == PD_STATE_WRITE_REGS)? + {pd_out_flags, pd_dregs[pd_dreg_count][31:0]} : com_inp_data + ; + wire pd_out_valid = + (pd_state == PD_STATE_WRITE_REGS)? 1'b1 : ( + (pd_state == PD_STATE_WRITE_LIVE)? com_inp_valid : ( + 1'b0)); + + //The communication inspector ouput ready signal: + //Mux between the various destination ready signals. + wire pd_out_ready = + (pd_dest == PD_DEST_DSP)? pd_out_dsp_ready : ( + (pd_dest == PD_DEST_EXT)? pd_out_ext_ready : ( + (pd_dest == PD_DEST_CPU)? pd_out_cpu_ready : ( + (pd_dest == PD_DEST_BOF)? pd_out_bof_ready : ( + 1'b0)))); + + //Always connected output data lines. + assign pd_out_dsp_data = pd_out_data; + assign pd_out_ext_data = pd_out_data; + assign pd_out_cpu_data = pd_out_data; + assign pd_out_bof_data = pd_out_data; + + //Destination output valid signals: + //Comes from inspector valid when destination is selected, and otherwise low. + assign pd_out_dsp_valid = (pd_dest == PD_DEST_DSP)? pd_out_valid : 1'b0; + assign pd_out_ext_valid = (pd_dest == PD_DEST_EXT)? pd_out_valid : 1'b0; + assign pd_out_cpu_valid = (pd_dest == PD_DEST_CPU)? pd_out_valid : 1'b0; + assign pd_out_bof_valid = (pd_dest == PD_DEST_BOF)? pd_out_valid : 1'b0; + + //The communication inspector ouput ready signal: + //Always ready when storing to data registers, + //comes from inspector ready output when live, + //and otherwise low. + assign com_inp_ready = + (pd_state == PD_STATE_READ_COM_PRE) ? 1'b1 : ( + (pd_state == PD_STATE_READ_COM) ? 1'b1 : ( + (pd_state == PD_STATE_WRITE_LIVE) ? pd_out_ready : ( + 1'b0))); + + always @(posedge clk) + if(rst | clr) begin + pd_state <= PD_STATE_READ_COM_PRE; + pd_dreg_count <= 0; + end + else begin + case(pd_state) + PD_STATE_READ_COM_PRE: begin + if (com_inp_ready & com_inp_valid & com_inp_data[32]) begin + pd_state <= PD_STATE_READ_COM; + pd_dreg_count <= pd_dreg_count_next; + pd_dregs[pd_dreg_count] <= com_inp_data; + end + end + + PD_STATE_READ_COM: begin + if (com_inp_ready & com_inp_valid) begin + pd_dregs[pd_dreg_count] <= com_inp_data; + if (pd_dreg_counter_done | com_inp_data[33]) begin + pd_state <= PD_STATE_WRITE_REGS; + pd_dreg_count <= 0; + + //---------- begin inspection decision -----------// + //EOF or bcast or not IPv4 or not UDP: + if ( + com_inp_data[33] || (pd_dregs_eth_dst_mac == 48'hffffffffffff) || + (pd_dregs_eth_type != 16'h800) || (pd_dregs_ipv4_proto != 8'h11) + ) begin + pd_dest <= PD_DEST_BOF; + end + + //not my IP address: + else if (pd_dregs_ipv4_dst_addr != my_ip_addr) begin + pd_dest <= PD_DEST_EXT; + end + + //UDP data port and VRT: + else if ((pd_dregs_udp_dst_port == dsp_udp_port) && (pd_dregs_vrt_size != 16'h0)) begin + pd_dest <= PD_DEST_DSP; + pd_dreg_count <= PD_DREGS_DSP_OFFSET; + end + + //other: + else begin + pd_dest <= PD_DEST_CPU; + end + //---------- end inspection decision -------------// + + end + else begin + pd_dreg_count <= pd_dreg_count_next; + end + end + end + + PD_STATE_WRITE_REGS: begin + if (pd_out_ready & pd_out_valid) begin + if (pd_out_data[33]) begin + pd_state <= PD_STATE_READ_COM_PRE; + pd_dreg_count <= 0; + end + else if (pd_dreg_counter_done) begin + pd_state <= PD_STATE_WRITE_LIVE; + pd_dreg_count <= 0; + end + else begin + pd_dreg_count <= pd_dreg_count_next; + end + end + end + + PD_STATE_WRITE_LIVE: begin + if (pd_out_ready & pd_out_valid & pd_out_data[33]) begin + pd_state <= PD_STATE_READ_COM_PRE; + end + end + + endcase //pd_state + end + + //connect this fast-path signals directly to the DSP out + assign dsp_out_data = pd_out_dsp_data; + assign dsp_out_valid = pd_out_dsp_valid; + assign pd_out_dsp_ready = dsp_out_ready; + + //////////////////////////////////////////////////////////////////// + // Splitter and output muxes for the bof packets + // - split the bof packets into two streams + // - mux split packets into cpu out and ext out + //////////////////////////////////////////////////////////////////// + + //dummy signals to join the the splitter and muxes below + wire [35:0] _split_to_ext_data, _split_to_cpu_data; + wire _split_to_ext_valid, _split_to_cpu_valid; + wire _split_to_ext_ready, _split_to_cpu_ready; + + splitter36 bof_out_splitter( + .clk(clk), .rst(rst), .clr(clr), + .inp_data(pd_out_bof_data), .inp_valid(pd_out_bof_valid), .inp_ready(pd_out_bof_ready), + .out0_data(_split_to_ext_data), .out0_valid(_split_to_ext_valid), .out0_ready(_split_to_ext_ready), + .out1_data(_split_to_cpu_data), .out1_valid(_split_to_cpu_valid), .out1_ready(_split_to_cpu_ready) + ); + + fifo36_mux ext_out_mux( + .clk(clk), .reset(rst), .clear(clr), + .data0_i(pd_out_ext_data), .src0_rdy_i(pd_out_ext_valid), .dst0_rdy_o(pd_out_ext_ready), + .data1_i(_split_to_ext_data), .src1_rdy_i(_split_to_ext_valid), .dst1_rdy_o(_split_to_ext_ready), + .data_o(ext_out_data), .src_rdy_o(ext_out_valid), .dst_rdy_i(ext_out_ready) + ); + + fifo36_mux cpu_out_mux( + .clk(clk), .reset(rst), .clear(clr), + .data0_i(pd_out_cpu_data), .src0_rdy_i(pd_out_cpu_valid), .dst0_rdy_o(pd_out_cpu_ready), + .data1_i(_split_to_cpu_data), .src1_rdy_i(_split_to_cpu_valid), .dst1_rdy_o(_split_to_cpu_ready), + .data_o(cpu_out_data), .src_rdy_o(cpu_out_valid), .dst_rdy_i(cpu_out_ready) + ); + +endmodule // packet_dispatcher36_x3 diff --git a/fpga/usrp2/fifo/packet_generator.v b/fpga/usrp2/fifo/packet_generator.v new file mode 100644 index 000000000..2ae911e24 --- /dev/null +++ b/fpga/usrp2/fifo/packet_generator.v @@ -0,0 +1,83 @@ + + +module packet_generator + (input clk, input reset, input clear, + output reg [7:0] data_o, output sof_o, output eof_o, + input [127:0] header, + output src_rdy_o, input dst_rdy_i); + + localparam len = 32'd2000; + + reg [31:0] state; + reg [31:0] seq; + reg [31:0] crc_out; + wire calc_crc = src_rdy_o & dst_rdy_i & ~(state[31:2] == 30'h3FFF_FFFF); + + + always @(posedge clk) + if(reset | clear) + seq <= 0; + else + if(eof_o & src_rdy_o & dst_rdy_i) + seq <= seq + 1; + + always @(posedge clk) + if(reset | clear) + state <= 0; + else + if(src_rdy_o & dst_rdy_i) + if(state == (len - 1)) + state <= 32'hFFFF_FFFC; + else + state <= state + 1; + + always @* + case(state) + 0 : data_o <= len[31:24]; + 1 : data_o <= len[23:16]; + 2 : data_o <= len[15:8]; + 3 : data_o <= len[7:0]; + 4 : data_o <= seq[31:24]; + 5 : data_o <= seq[23:16]; + 6 : data_o <= seq[15:8]; + 7 : data_o <= seq[7:0]; + 8 : data_o <= header[7:0]; + 9 : data_o <= header[15:8]; + 10 : data_o <= header[23:16]; + 11 : data_o <= header[31:24]; + 12 : data_o <= header[39:32]; + 13 : data_o <= header[47:40]; + 14 : data_o <= header[55:48]; + 15 : data_o <= header[63:56]; + 16 : data_o <= header[71:64]; + 17 : data_o <= header[79:72]; + 18 : data_o <= header[87:80]; + 19 : data_o <= header[95:88]; + 20 : data_o <= header[103:96]; + 21 : data_o <= header[111:104]; + 22 : data_o <= header[119:112]; + 23 : data_o <= header[127:120]; + + 32'hFFFF_FFFC : data_o <= crc_out[31:24]; + 32'hFFFF_FFFD : data_o <= crc_out[23:16]; + 32'hFFFF_FFFE : data_o <= crc_out[15:8]; + 32'hFFFF_FFFF : data_o <= crc_out[7:0]; + default : data_o <= state[7:0]; + endcase // case (state) + + assign src_rdy_o = 1; + assign sof_o = (state == 0); + assign eof_o = (state == 32'hFFFF_FFFF); + + wire clear_crc = eof_o & src_rdy_o & dst_rdy_i; + +// crc crc(.clk(clk), .reset(reset), .clear(clear_crc), .data(data_o), +// .calc(calc_crc), .crc_out(crc_out), .match()); + always @(posedge clk) + if(reset | clear | clear_crc) + crc_out <= 0; + else + if(calc_crc) + crc_out <= crc_out + data_o; + +endmodule // packet_generator diff --git a/fpga/usrp2/control_lib/newfifo/packet_generator32.v b/fpga/usrp2/fifo/packet_generator32.v index 6f8004964..1dc57191d 100644 --- a/fpga/usrp2/control_lib/newfifo/packet_generator32.v +++ b/fpga/usrp2/fifo/packet_generator32.v @@ -2,6 +2,7 @@ module packet_generator32 (input clk, input reset, input clear, + input [127:0] header, output [35:0] data_o, output src_rdy_o, input dst_rdy_i); wire [7:0] ll_data; @@ -10,6 +11,7 @@ module packet_generator32 packet_generator pkt_gen (.clk(clk), .reset(reset), .clear(clear), .data_o(ll_data), .sof_o(ll_sof), .eof_o(ll_eof), + .header(header), .src_rdy_o(ll_src_rdy), .dst_rdy_i(~ll_dst_rdy_n)); ll8_to_fifo36 ll8_to_f36 diff --git a/fpga/usrp2/fifo/packet_router.v b/fpga/usrp2/fifo/packet_router.v index 161b59016..7774ff076 100644 --- a/fpga/usrp2/fifo/packet_router.v +++ b/fpga/usrp2/fifo/packet_router.v @@ -33,7 +33,8 @@ module packet_router // Input Interfaces (in to router) input [35:0] ser_inp_data, input ser_inp_valid, output ser_inp_ready, - input [35:0] dsp_inp_data, input dsp_inp_valid, output dsp_inp_ready, + input [35:0] dsp0_inp_data, input dsp0_inp_valid, output dsp0_inp_ready, + input [35:0] dsp1_inp_data, input dsp1_inp_valid, output dsp1_inp_ready, input [35:0] eth_inp_data, input eth_inp_valid, output eth_inp_ready, input [35:0] err_inp_data, input err_inp_valid, output err_inp_ready, @@ -68,28 +69,14 @@ module packet_router //setting register for mode control wire [31:0] _sreg_mode_ctrl; + wire master_mode_flag; + setting_reg #(.my_addr(CTRL_BASE+0), .width(1)) sreg_mode_ctrl( .clk(stream_clk),.rst(stream_rst), .strobe(set_stb),.addr(set_addr),.in(set_data), .out(master_mode_flag),.changed() ); - //setting register to program the IP address - wire [31:0] my_ip_addr; - setting_reg #(.my_addr(CTRL_BASE+1)) sreg_ip_addr( - .clk(stream_clk),.rst(stream_rst), - .strobe(set_stb),.addr(set_addr),.in(set_data), - .out(my_ip_addr),.changed() - ); - - //setting register to program the UDP data ports - wire [15:0] dsp0_udp_port, dsp1_udp_port; - setting_reg #(.my_addr(CTRL_BASE+2)) sreg_data_ports( - .clk(stream_clk),.rst(stream_rst), - .strobe(set_stb),.addr(set_addr),.in(set_data), - .out({dsp1_udp_port, dsp0_udp_port}),.changed() - ); - //assign status output signals wire [31:0] cpu_iface_status; assign status = { @@ -116,6 +103,11 @@ module packet_router wire _eth_inp_valid; wire _eth_inp_ready; + // dummy signals to connect fifo_short + wire [35:0] _com_inp_data; + wire _com_inp_valid; + wire _com_inp_ready; + valve36 eth_inp_valve ( .clk(stream_clk), .reset(stream_rst), .clear(stream_clr), .shutoff(~master_mode_flag), .data_i(eth_inp_data), .src_rdy_i(eth_inp_valid), .dst_rdy_o(eth_inp_ready), @@ -126,10 +118,17 @@ module packet_router .clk(stream_clk), .reset(stream_rst), .clear(stream_clr), .cross(~master_mode_flag), .data0_i(_eth_inp_data), .src0_rdy_i(_eth_inp_valid), .dst0_rdy_o(_eth_inp_ready), .data1_i(ser_inp_data), .src1_rdy_i(ser_inp_valid), .dst1_rdy_o(ser_inp_ready), - .data0_o(com_inp_data), .src0_rdy_o(com_inp_valid), .dst0_rdy_i(com_inp_ready), + .data0_o(_com_inp_data), .src0_rdy_o(_com_inp_valid), .dst0_rdy_i(_com_inp_ready), .data1_o(ext_inp_data), .src1_rdy_o(ext_inp_valid), .dst1_rdy_i(ext_inp_ready) ); + // short fifo in the packet inspection path to help timing + fifo_short #(.WIDTH(36)) com_inp_fifo + (.clk(stream_clk), .reset(stream_rst), .clear(stream_clr), + .datain(_com_inp_data), .src_rdy_i(_com_inp_valid), .dst_rdy_o(_com_inp_ready), + .dataout(com_inp_data), .src_rdy_o(com_inp_valid), .dst_rdy_i(com_inp_ready), + .space(), .occupied() ); + //////////////////////////////////////////////////////////////////// // Communication output sink crossbar // When in master mode: @@ -166,36 +165,34 @@ module packet_router //////////////////////////////////////////////////////////////////// // Communication output source combiner (feeds UDP proto machine) - // - DSP framer + // - DSP input // - CPU input // - ERR input //////////////////////////////////////////////////////////////////// - //streaming signals from the dsp framer to the combiner - wire [35:0] dsp_frm_data; - wire dsp_frm_valid; - wire dsp_frm_ready; - //dummy signals to join the the muxes below wire [35:0] _combiner0_data, _combiner1_data; wire _combiner0_valid, _combiner1_valid; wire _combiner0_ready, _combiner1_ready; - fifo36_mux _com_output_combiner0( + fifo36_mux #(.prio(0)) // No priority, fair sharing + _com_output_combiner0( .clk(stream_clk), .reset(stream_rst), .clear(stream_clr), - .data0_i(dsp_frm_data), .src0_rdy_i(dsp_frm_valid), .dst0_rdy_o(dsp_frm_ready), - .data1_i(err_inp_data), .src1_rdy_i(err_inp_valid), .dst1_rdy_o(err_inp_ready), + .data0_i(err_inp_data), .src0_rdy_i(err_inp_valid), .dst0_rdy_o(err_inp_ready), + .data1_i(cpu_inp_data), .src1_rdy_i(cpu_inp_valid), .dst1_rdy_o(cpu_inp_ready), .data_o(_combiner0_data), .src_rdy_o(_combiner0_valid), .dst_rdy_i(_combiner0_ready) ); - fifo36_mux _com_output_combiner1( + fifo36_mux #(.prio(0)) // No priority, fair sharing + _com_output_combiner1( .clk(stream_clk), .reset(stream_rst), .clear(stream_clr), - .data0_i(32'b0), .src0_rdy_i(1'b0), .dst0_rdy_o(), //mux out from dsp1 can go here - .data1_i(cpu_inp_data), .src1_rdy_i(cpu_inp_valid), .dst1_rdy_o(cpu_inp_ready), + .data0_i(dsp0_inp_data), .src0_rdy_i(dsp0_inp_valid), .dst0_rdy_o(dsp0_inp_ready), + .data1_i(dsp1_inp_data), .src1_rdy_i(dsp1_inp_valid), .dst1_rdy_o(dsp1_inp_ready), .data_o(_combiner1_data), .src_rdy_o(_combiner1_valid), .dst_rdy_i(_combiner1_ready) ); - fifo36_mux com_output_source( + fifo36_mux #(.prio(1)) // Give priority to err/cpu over dsp + com_output_source( .clk(stream_clk), .reset(stream_rst), .clear(stream_clr), .data0_i(_combiner0_data), .src0_rdy_i(_combiner0_valid), .dst0_rdy_o(_combiner0_ready), .data1_i(_combiner1_data), .src1_rdy_i(_combiner1_valid), .dst1_rdy_o(_combiner1_ready), @@ -204,6 +201,7 @@ module packet_router //////////////////////////////////////////////////////////////////// // Interface CPU to memory mapped wishbone + // - Uses 1 setting register //////////////////////////////////////////////////////////////////// buffer_int2 #(.BASE(CTRL_BASE+3), .BUF_SIZE(BUF_SIZE)) cpu_to_wb( .clk(stream_clk), .rst(stream_rst | stream_clr), @@ -225,218 +223,21 @@ module packet_router ); //////////////////////////////////////////////////////////////////// - // Communication input inspector - // - inspect com input and send it to DSP, EXT, CPU, or BOTH - //////////////////////////////////////////////////////////////////// - localparam COM_INSP_STATE_READ_COM_PRE = 0; - localparam COM_INSP_STATE_READ_COM = 1; - localparam COM_INSP_STATE_WRITE_REGS = 2; - localparam COM_INSP_STATE_WRITE_LIVE = 3; - - localparam COM_INSP_DEST_DSP = 0; - localparam COM_INSP_DEST_EXT = 1; - localparam COM_INSP_DEST_CPU = 2; - localparam COM_INSP_DEST_BOF = 3; - - localparam COM_INSP_MAX_NUM_DREGS = 13; //padded_eth + ip + udp + seq + vrt_hdr - localparam COM_INSP_DREGS_DSP_OFFSET = 11; //offset to start dsp at - - //output inspector interfaces - wire [35:0] com_insp_out_dsp_data; - wire com_insp_out_dsp_valid; - wire com_insp_out_dsp_ready; - - wire [35:0] com_insp_out_ext_data; - wire com_insp_out_ext_valid; - wire com_insp_out_ext_ready; - - wire [35:0] com_insp_out_cpu_data; - wire com_insp_out_cpu_valid; - wire com_insp_out_cpu_ready; - - wire [35:0] com_insp_out_bof_data; - wire com_insp_out_bof_valid; - wire com_insp_out_bof_ready; - - //connect this fast-path signals directly to the DSP out - assign dsp_out_data = com_insp_out_dsp_data; - assign dsp_out_valid = com_insp_out_dsp_valid; - assign com_insp_out_dsp_ready = dsp_out_ready; - - reg [1:0] com_insp_state; - reg [1:0] com_insp_dest; - reg [3:0] com_insp_dreg_count; //data registers to buffer headers - wire [3:0] com_insp_dreg_count_next = com_insp_dreg_count + 1'b1; - wire com_insp_dreg_counter_done = (com_insp_dreg_count_next == COM_INSP_MAX_NUM_DREGS)? 1'b1 : 1'b0; - reg [35:0] com_insp_dregs [COM_INSP_MAX_NUM_DREGS-1:0]; - - //extract various packet components: - wire [47:0] com_insp_dregs_eth_dst_mac = {com_insp_dregs[0][15:0], com_insp_dregs[1][31:0]}; - wire [15:0] com_insp_dregs_eth_type = com_insp_dregs[3][15:0]; - wire [7:0] com_insp_dregs_ipv4_proto = com_insp_dregs[6][23:16]; - wire [31:0] com_insp_dregs_ipv4_dst_addr = com_insp_dregs[8][31:0]; - wire [15:0] com_insp_dregs_udp_dst_port = com_insp_dregs[9][15:0]; - wire [15:0] com_insp_dregs_vrt_size = com_inp_data[15:0]; - - //Inspector output flags special case: - //Inject SOF into flags at first DSP line. - wire [3:0] com_insp_out_flags = ( - (com_insp_dreg_count == COM_INSP_DREGS_DSP_OFFSET) && - (com_insp_dest == COM_INSP_DEST_DSP) - )? 4'b0001 : com_insp_dregs[com_insp_dreg_count][35:32]; - - //The communication inspector ouput data and valid signals: - //Mux between com input and data registers based on the state. - wire [35:0] com_insp_out_data = (com_insp_state == COM_INSP_STATE_WRITE_REGS)? - {com_insp_out_flags, com_insp_dregs[com_insp_dreg_count][31:0]} : com_inp_data - ; - wire com_insp_out_valid = - (com_insp_state == COM_INSP_STATE_WRITE_REGS)? 1'b1 : ( - (com_insp_state == COM_INSP_STATE_WRITE_LIVE)? com_inp_valid : ( - 1'b0)); - - //The communication inspector ouput ready signal: - //Mux between the various destination ready signals. - wire com_insp_out_ready = - (com_insp_dest == COM_INSP_DEST_DSP)? com_insp_out_dsp_ready : ( - (com_insp_dest == COM_INSP_DEST_EXT)? com_insp_out_ext_ready : ( - (com_insp_dest == COM_INSP_DEST_CPU)? com_insp_out_cpu_ready : ( - (com_insp_dest == COM_INSP_DEST_BOF)? com_insp_out_bof_ready : ( - 1'b0)))); - - //Always connected output data lines. - assign com_insp_out_dsp_data = com_insp_out_data; - assign com_insp_out_ext_data = com_insp_out_data; - assign com_insp_out_cpu_data = com_insp_out_data; - assign com_insp_out_bof_data = com_insp_out_data; - - //Destination output valid signals: - //Comes from inspector valid when destination is selected, and otherwise low. - assign com_insp_out_dsp_valid = (com_insp_dest == COM_INSP_DEST_DSP)? com_insp_out_valid : 1'b0; - assign com_insp_out_ext_valid = (com_insp_dest == COM_INSP_DEST_EXT)? com_insp_out_valid : 1'b0; - assign com_insp_out_cpu_valid = (com_insp_dest == COM_INSP_DEST_CPU)? com_insp_out_valid : 1'b0; - assign com_insp_out_bof_valid = (com_insp_dest == COM_INSP_DEST_BOF)? com_insp_out_valid : 1'b0; - - //The communication inspector ouput ready signal: - //Always ready when storing to data registers, - //comes from inspector ready output when live, - //and otherwise low. - assign com_inp_ready = - (com_insp_state == COM_INSP_STATE_READ_COM_PRE) ? 1'b1 : ( - (com_insp_state == COM_INSP_STATE_READ_COM) ? 1'b1 : ( - (com_insp_state == COM_INSP_STATE_WRITE_LIVE) ? com_insp_out_ready : ( - 1'b0))); - - always @(posedge stream_clk) - if(stream_rst | stream_clr) begin - com_insp_state <= COM_INSP_STATE_READ_COM_PRE; - com_insp_dreg_count <= 0; - end - else begin - case(com_insp_state) - COM_INSP_STATE_READ_COM_PRE: begin - if (com_inp_ready & com_inp_valid & com_inp_data[32]) begin - com_insp_state <= COM_INSP_STATE_READ_COM; - com_insp_dreg_count <= com_insp_dreg_count_next; - com_insp_dregs[com_insp_dreg_count] <= com_inp_data; - end - end - - COM_INSP_STATE_READ_COM: begin - if (com_inp_ready & com_inp_valid) begin - com_insp_dregs[com_insp_dreg_count] <= com_inp_data; - if (com_insp_dreg_counter_done | com_inp_data[33]) begin - com_insp_state <= COM_INSP_STATE_WRITE_REGS; - com_insp_dreg_count <= 0; - - //---------- begin inspection decision -----------// - //EOF or bcast or not IPv4 or not UDP: - if ( - com_inp_data[33] || (com_insp_dregs_eth_dst_mac == 48'hffffffffffff) || - (com_insp_dregs_eth_type != 16'h800) || (com_insp_dregs_ipv4_proto != 8'h11) - ) begin - com_insp_dest <= COM_INSP_DEST_BOF; - end - - //not my IP address: - else if (com_insp_dregs_ipv4_dst_addr != my_ip_addr) begin - com_insp_dest <= COM_INSP_DEST_EXT; - end - - //UDP data port and VRT: - else if ((com_insp_dregs_udp_dst_port == dsp0_udp_port) && (com_insp_dregs_vrt_size != 16'h0)) begin - com_insp_dest <= COM_INSP_DEST_DSP; - com_insp_dreg_count <= COM_INSP_DREGS_DSP_OFFSET; - end - - //other: - else begin - com_insp_dest <= COM_INSP_DEST_CPU; - end - //---------- end inspection decision -------------// - - end - else begin - com_insp_dreg_count <= com_insp_dreg_count_next; - end - end - end - - COM_INSP_STATE_WRITE_REGS: begin - if (com_insp_out_ready & com_insp_out_valid) begin - if (com_insp_out_data[33]) begin - com_insp_state <= COM_INSP_STATE_READ_COM_PRE; - com_insp_dreg_count <= 0; - end - else if (com_insp_dreg_counter_done) begin - com_insp_state <= COM_INSP_STATE_WRITE_LIVE; - com_insp_dreg_count <= 0; - end - else begin - com_insp_dreg_count <= com_insp_dreg_count_next; - end - end - end - - COM_INSP_STATE_WRITE_LIVE: begin - if (com_insp_out_ready & com_insp_out_valid & com_insp_out_data[33]) begin - com_insp_state <= COM_INSP_STATE_READ_COM_PRE; - end - end - - endcase //com_insp_state - end - - //////////////////////////////////////////////////////////////////// - // Splitter and output muxes for the bof packets - // - split the bof packets into two streams - // - mux split packets into cpu out and ext out + // Packet Dispatcher + // - Uses 2 setting registers + // - provide buffering before cpu for random + small packet bursts //////////////////////////////////////////////////////////////////// + wire [35:0] _cpu_out_data; + wire _cpu_out_valid; + wire _cpu_out_ready; - //dummy signals to join the the splitter and muxes below - wire [35:0] _split_to_ext_data, _split_to_cpu_data, _cpu_out_data; - wire _split_to_ext_valid, _split_to_cpu_valid, _cpu_out_valid; - wire _split_to_ext_ready, _split_to_cpu_ready, _cpu_out_ready; - - splitter36 bof_out_splitter( + packet_dispatcher36_x3 #(.BASE(CTRL_BASE+1)) packet_dispatcher( .clk(stream_clk), .rst(stream_rst), .clr(stream_clr), - .inp_data(com_insp_out_bof_data), .inp_valid(com_insp_out_bof_valid), .inp_ready(com_insp_out_bof_ready), - .out0_data(_split_to_ext_data), .out0_valid(_split_to_ext_valid), .out0_ready(_split_to_ext_ready), - .out1_data(_split_to_cpu_data), .out1_valid(_split_to_cpu_valid), .out1_ready(_split_to_cpu_ready) - ); - - fifo36_mux ext_out_mux( - .clk(stream_clk), .reset(stream_rst), .clear(stream_clr), - .data0_i(com_insp_out_ext_data), .src0_rdy_i(com_insp_out_ext_valid), .dst0_rdy_o(com_insp_out_ext_ready), - .data1_i(_split_to_ext_data), .src1_rdy_i(_split_to_ext_valid), .dst1_rdy_o(_split_to_ext_ready), - .data_o(ext_out_data), .src_rdy_o(ext_out_valid), .dst_rdy_i(ext_out_ready) - ); - - fifo36_mux cpu_out_mux( - .clk(stream_clk), .reset(stream_rst), .clear(stream_clr), - .data0_i(com_insp_out_cpu_data), .src0_rdy_i(com_insp_out_cpu_valid), .dst0_rdy_o(com_insp_out_cpu_ready), - .data1_i(_split_to_cpu_data), .src1_rdy_i(_split_to_cpu_valid), .dst1_rdy_o(_split_to_cpu_ready), - .data_o(_cpu_out_data), .src_rdy_o(_cpu_out_valid), .dst_rdy_i(_cpu_out_ready) + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .com_inp_data(com_inp_data), .com_inp_valid(com_inp_valid), .com_inp_ready(com_inp_ready), + .ext_out_data(ext_out_data), .ext_out_valid(ext_out_valid), .ext_out_ready(ext_out_ready), + .dsp_out_data(dsp_out_data), .dsp_out_valid(dsp_out_valid), .dsp_out_ready(dsp_out_ready), + .cpu_out_data(_cpu_out_data), .cpu_out_valid(_cpu_out_valid), .cpu_out_ready(_cpu_out_ready) ); fifo_cascade #(.WIDTH(36), .SIZE(9/*512 lines plenty for short pkts*/)) cpu_out_fifo ( @@ -446,23 +247,13 @@ module packet_router ); //////////////////////////////////////////////////////////////////// - // DSP input framer - //////////////////////////////////////////////////////////////////// - - dsp_framer36 #(.BUF_SIZE(BUF_SIZE)) dsp0_framer36( - .clk(stream_clk), .rst(stream_rst), .clr(stream_clr), - .inp_data(dsp_inp_data), .inp_valid(dsp_inp_valid), .inp_ready(dsp_inp_ready), - .out_data(dsp_frm_data), .out_valid(dsp_frm_valid), .out_ready(dsp_frm_ready) - ); - - //////////////////////////////////////////////////////////////////// // UDP TX Protocol machine //////////////////////////////////////////////////////////////////// //dummy signals to connect the components below - wire [18:0] _udp_r2s_data, _udp_s2p_data, _udp_p2s_data, _udp_s2r_data; - wire _udp_r2s_valid, _udp_s2p_valid, _udp_p2s_valid, _udp_s2r_valid; - wire _udp_r2s_ready, _udp_s2p_ready, _udp_p2s_ready, _udp_s2r_ready; + wire [18:0] _udp_r2s_data, _udp_s2r_data; + wire _udp_r2s_valid, _udp_s2r_valid; + wire _udp_r2s_ready, _udp_s2r_ready; wire [35:0] _com_out_data; wire _com_out_valid, _com_out_ready; @@ -472,23 +263,11 @@ module packet_router .f36_datain(udp_out_data), .f36_src_rdy_i(udp_out_valid), .f36_dst_rdy_o(udp_out_ready), .f19_dataout(_udp_r2s_data), .f19_src_rdy_o(_udp_r2s_valid), .f19_dst_rdy_i(_udp_r2s_ready) ); - fifo_short #(.WIDTH(19)) udp_shortfifo19_inp - (.clk(stream_clk), .reset(stream_rst), .clear(stream_clr), - .datain(_udp_r2s_data), .src_rdy_i(_udp_r2s_valid), .dst_rdy_o(_udp_r2s_ready), - .dataout(_udp_s2p_data), .src_rdy_o(_udp_s2p_valid), .dst_rdy_i(_udp_s2p_ready), - .space(), .occupied() ); - prot_eng_tx #(.BASE(UDP_BASE)) udp_prot_eng_tx (.clk(stream_clk), .reset(stream_rst), .clear(stream_clr), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), - .datain(_udp_s2p_data), .src_rdy_i(_udp_s2p_valid), .dst_rdy_o(_udp_s2p_ready), - .dataout(_udp_p2s_data), .src_rdy_o(_udp_p2s_valid), .dst_rdy_i(_udp_p2s_ready) ); - - fifo_short #(.WIDTH(19)) udp_shortfifo19_out - (.clk(stream_clk), .reset(stream_rst), .clear(stream_clr), - .datain(_udp_p2s_data), .src_rdy_i(_udp_p2s_valid), .dst_rdy_o(_udp_p2s_ready), - .dataout(_udp_s2r_data), .src_rdy_o(_udp_s2r_valid), .dst_rdy_i(_udp_s2r_ready), - .space(), .occupied() ); + .datain(_udp_r2s_data), .src_rdy_i(_udp_r2s_valid), .dst_rdy_o(_udp_r2s_ready), + .dataout(_udp_s2r_data), .src_rdy_o(_udp_s2r_valid), .dst_rdy_i(_udp_s2r_ready) ); fifo19_to_fifo36 udp_fifo19_to_fifo36 (.clk(stream_clk), .reset(stream_rst), .clear(stream_clr), @@ -507,8 +286,10 @@ module packet_router //////////////////////////////////////////////////////////////////// assign debug = { - //inputs to the router (8) - dsp_inp_ready, dsp_inp_valid, + //inputs to the router (12) + dsp0_inp_ready, dsp0_inp_valid, + dsp1_inp_ready, dsp1_inp_valid, + err_inp_ready, err_inp_valid, ser_inp_ready, ser_inp_valid, eth_inp_ready, eth_inp_valid, cpu_inp_ready, cpu_inp_valid, @@ -519,17 +300,13 @@ module packet_router eth_out_ready, eth_out_valid, cpu_out_ready, cpu_out_valid, - //inspector interfaces (8) - com_insp_out_dsp_ready, com_insp_out_dsp_valid, - com_insp_out_ext_ready, com_insp_out_ext_valid, - com_insp_out_cpu_ready, com_insp_out_cpu_valid, - com_insp_out_bof_ready, com_insp_out_bof_valid, - //other interfaces (8) ext_inp_ready, ext_inp_valid, com_out_ready, com_out_valid, ext_out_ready, ext_out_valid, - com_inp_ready, com_inp_valid + com_inp_ready, com_inp_valid, + + 4'b0 }; endmodule // packet_router diff --git a/fpga/usrp2/control_lib/newfifo/packet_tb.v b/fpga/usrp2/fifo/packet_tb.v index 3c423d2ba..3c423d2ba 100644 --- a/fpga/usrp2/control_lib/newfifo/packet_tb.v +++ b/fpga/usrp2/fifo/packet_tb.v diff --git a/fpga/usrp2/control_lib/newfifo/packet_verifier.v b/fpga/usrp2/fifo/packet_verifier.v index b49ad1bbb..21a4c136e 100644 --- a/fpga/usrp2/control_lib/newfifo/packet_verifier.v +++ b/fpga/usrp2/fifo/packet_verifier.v @@ -18,7 +18,7 @@ module packet_verifier reg [31:0] length; wire first_byte, last_byte; reg second_byte, last_byte_d1; - + wire match_crc; wire calc_crc = src_rdy_i & dst_rdy_o; crc crc(.clk(clk), .reset(reset), .clear(last_byte_d1), .data(data_i), diff --git a/fpga/usrp2/fifo/packet_verifier32.v b/fpga/usrp2/fifo/packet_verifier32.v new file mode 100644 index 000000000..ec08e657d --- /dev/null +++ b/fpga/usrp2/fifo/packet_verifier32.v @@ -0,0 +1,23 @@ + + +module packet_verifier32 + (input clk, input reset, input clear, + input [35:0] data_i, input src_rdy_i, output dst_rdy_o, + output [31:0] total, output [31:0] crc_err, output [31:0] seq_err, output [31:0] len_err); + + wire [7:0] ll_data; + wire ll_sof, ll_eof, ll_src_rdy, ll_dst_rdy; + + fifo36_to_ll8 f36_to_ll8 + (.clk(clk), .reset(reset), .clear(clear), + .f36_data(data_i), .f36_src_rdy_i(src_rdy_i), .f36_dst_rdy_o(dst_rdy_o), + .ll_data(ll_data), .ll_sof(ll_sof), .ll_eof(ll_eof), + .ll_src_rdy(ll_src_rdy), .ll_dst_rdy(ll_dst_rdy)); + + packet_verifier pkt_ver + (.clk(clk), .reset(reset), .clear(clear), + .data_i(ll_data), .sof_i(ll_sof), .eof_i(ll_eof), + .src_rdy_i(ll_src_rdy), .dst_rdy_o(ll_dst_rdy), + .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); + +endmodule // packet_verifier32 diff --git a/fpga/usrp2/gpmc/fifo_to_gpmc_async.v b/fpga/usrp2/gpmc/fifo_to_gpmc_async.v index cf8b6e861..9a8e37ce9 100644 --- a/fpga/usrp2/gpmc/fifo_to_gpmc_async.v +++ b/fpga/usrp2/gpmc/fifo_to_gpmc_async.v @@ -1,9 +1,4 @@ -// Assumes an asynchronous GPMC cycle -// If a packet bigger or smaller than we are told is sent, behavior is undefined. -// If dst_rdy_i is low when we get data, behavior is undefined and we signal bus error. -// If there is a bus error, we should be reset - module fifo_to_gpmc_async (input clk, input reset, input clear, input [17:0] data_i, input src_rdy_i, output dst_rdy_o, diff --git a/fpga/usrp2/gpmc/gpmc_async.v b/fpga/usrp2/gpmc/gpmc_async.v index 23bad56ae..02bf45b8a 100644 --- a/fpga/usrp2/gpmc/gpmc_async.v +++ b/fpga/usrp2/gpmc/gpmc_async.v @@ -1,7 +1,9 @@ ////////////////////////////////////////////////////////////////////////////////// module gpmc_async - #(parameter TXFIFOSIZE = 11, parameter RXFIFOSIZE = 11) + #(parameter TXFIFOSIZE = 11, + parameter RXFIFOSIZE = 11, + parameter BUSDEBUG = 1) (// GPMC signals input arst, input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE, @@ -21,7 +23,9 @@ module gpmc_async input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o, input [15:0] tx_frame_len, output [15:0] rx_frame_len, - + + output tx_underrun, output rx_overrun, + input [7:0] test_rate, input [3:0] test_ctrl, output [31:0] debug ); @@ -49,8 +53,8 @@ module gpmc_async wire [17:0] tx18_data, tx18b_data; wire tx18_src_rdy, tx18_dst_rdy, tx18b_src_rdy, tx18b_dst_rdy; wire [15:0] tx_fifo_space; - wire [35:0] tx36_data; - wire tx36_src_rdy, tx36_dst_rdy; + wire [35:0] tx36_data, tx_data; + wire tx36_src_rdy, tx36_dst_rdy, tx_src_rdy, tx_dst_rdy; gpmc_to_fifo_async gpmc_to_fifo_async (.EM_D(EM_D), .EM_NBE(EM_NBE), .EM_NCS(EM_NCS4), .EM_NWE(EM_NWE), @@ -70,9 +74,9 @@ module gpmc_async .f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy)); fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36 - (.clk(wb_clk), .reset(wb_rst), .clear(clear_tx), + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), .datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy), - .dataout(tx_data_o), .src_rdy_o(tx_src_rdy_o), .dst_rdy_i(tx_dst_rdy_i)); + .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy)); // //////////////////////////////////////////// // RX Data Path @@ -80,13 +84,13 @@ module gpmc_async wire [17:0] rx18_data, rx18b_data; wire rx18_src_rdy, rx18_dst_rdy, rx18b_src_rdy, rx18b_dst_rdy; wire [15:0] rx_fifo_space; - wire [35:0] rx36_data; - wire rx36_src_rdy, rx36_dst_rdy; + wire [35:0] rx36_data, rx_data; + wire rx36_src_rdy, rx36_dst_rdy, rx_src_rdy, rx_dst_rdy; wire dummy; fifo_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_fifo36 - (.clk(wb_clk), .reset(wb_rst), .clear(clear_rx), - .datain(rx_data_i), .src_rdy_i(rx_src_rdy_i), .dst_rdy_o(rx_dst_rdy_o), + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy), .dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy)); fifo36_to_fifo19 #(.LE(1)) f36_to_f19 // Little endian because ARM is LE @@ -125,6 +129,100 @@ module gpmc_async .wb_sel_o(wb_sel_o), .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), .wb_ack_i(wb_ack_i) ); - assign debug = pkt_count; +// assign debug = pkt_count; + + // //////////////////////////////////////////// + // Test support, traffic generator, loopback, etc. + + // RX side muxes test data into the same stream + wire [35:0] timedrx_data, loopbackrx_data, testrx_data; + wire [35:0] timedtx_data, loopbacktx_data, testtx_data; + wire timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy, + testrx_src_rdy, testrx_dst_rdy; + wire timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy, + testtx_src_rdy, testtx_dst_rdy; + wire timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int; + + wire [31:0] total, crc_err, seq_err, len_err; + wire sel_testtx = test_ctrl[0]; + wire sel_loopbacktx = test_ctrl[1]; + wire pkt_src_enable = test_ctrl[2]; + wire pkt_sink_enable = test_ctrl[3]; + + fifo36_mux rx_test_mux_lvl_1 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy), + .data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy), + .data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy)); + + fifo36_mux rx_test_mux_lvl_2 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy), + .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o), + .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); + + fifo_short #(.WIDTH(36)) loopback_fifo + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx), + .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy), + .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy)); + // Crossbar used as a demux for switching TX stream to main DSP or to test logic + crossbar36 tx_crossbar_lvl_1 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .cross(sel_testtx), + .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy), + .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input + .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i), + .data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) ); + + crossbar36 tx_crossbar_lvl_2 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .cross(sel_loopbacktx), + .data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy), + .data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input + .data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy), + .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) ); + + // Fixed rate TX traffic consumer + fifo_pacer tx_pacer + (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable), + .src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy), + .src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int), + .underrun(tx_underrun), .overrun()); + + packet_verifier32 pktver32 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int), + .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); + + // Fixed rate RX traffic generator + packet_generator32 pktgen32 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .header({len_err,seq_err,crc_err,total}), + .data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int)); + + fifo_pacer rx_pacer + (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable), + .src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int), + .src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy), + .underrun(), .overrun(rx_overrun)); + + // FIXME -- hook up crossbar controls + // // FIXME -- collect error stats + // FIXME -- set rates and enables on pacers + // FIXME -- make sure packet completes before we shutoff + // FIXME -- handle overrun and underrun + +wire [0:17] dummy18; + +assign debug = {8'd0, + test_rate, + pkt_src_enable, pkt_sink_enable, timedrx_src_rdy_int, timedrx_dst_rdy_int, + timedrx_src_rdy, timedrx_dst_rdy, + testrx_src_rdy, testrx_dst_rdy, + rx_src_rdy, rx_dst_rdy, + rx36_src_rdy, rx36_dst_rdy, + rx18_src_rdy, rx18_dst_rdy, + rx18b_src_rdy, rx18b_dst_rdy}; + endmodule // gpmc_async diff --git a/fpga/usrp2/simple_gemac/simple_gemac_wrapper.v b/fpga/usrp2/simple_gemac/simple_gemac_wrapper.v index efcf89276..b783729d5 100644 --- a/fpga/usrp2/simple_gemac/simple_gemac_wrapper.v +++ b/fpga/usrp2/simple_gemac/simple_gemac_wrapper.v @@ -1,7 +1,7 @@ module simple_gemac_wrapper #(parameter RXFIFOSIZE=9, - parameter TXFIFOSIZE=6) + parameter TXFIFOSIZE=9) (input clk125, input reset, // GMII output GMII_GTX_CLK, output GMII_TX_EN, output GMII_TX_ER, output [7:0] GMII_TXD, @@ -30,7 +30,9 @@ module simple_gemac_wrapper wire pause_req; wire pause_request_en, pause_respect_en; wire [15:0] pause_time, pause_thresh, pause_time_req, rx_fifo_space; - + + wire [31:0] debug_state; + wire tx_reset, rx_reset; reset_sync reset_sync_tx (.clk(tx_clk),.reset_in(reset),.reset_out(tx_reset)); reset_sync reset_sync_rx (.clk(rx_clk),.reset_in(reset),.reset_out(rx_reset)); @@ -49,7 +51,8 @@ module simple_gemac_wrapper .rx_clk(rx_clk), .rx_data(rx_data), .rx_valid(rx_valid), .rx_error(rx_error), .rx_ack(rx_ack), .tx_clk(tx_clk), .tx_data(tx_data), - .tx_valid(tx_valid), .tx_error(tx_error), .tx_ack(tx_ack) + .tx_valid(tx_valid), .tx_error(tx_error), .tx_ack(tx_ack), + .debug(debug_state) ); simple_gemac_wb simple_gemac_wb @@ -65,14 +68,12 @@ module simple_gemac_wrapper // RX FIFO Chain wire rx_ll_sof, rx_ll_eof, rx_ll_src_rdy, rx_ll_dst_rdy; + wire [7:0] rx_ll_data; - wire rx_ll_sof2, rx_ll_eof2, rx_ll_src_rdy2, rx_ll_dst_rdy2; - wire rx_ll_sof2_n, rx_ll_eof2_n, rx_ll_src_rdy2_n, rx_ll_dst_rdy2_n; - - wire [7:0] rx_ll_data, rx_ll_data2; - - wire [35:0] rx_f36_data_int1; - wire rx_f36_src_rdy_int1, rx_f36_dst_rdy_int1; + wire [18:0] rx_f19_data_int1, rx_f19_data_int2; + wire rx_f19_src_rdy_int1, rx_f19_dst_rdy_int1, rx_f19_src_rdy_int2, rx_f19_dst_rdy_int2; + wire [35:0] rx_f36_data_int; + wire rx_f36_src_rdy_int, rx_f36_dst_rdy_int; rxmac_to_ll8 rx_adapt (.clk(rx_clk), .reset(rx_reset), .clear(0), @@ -80,86 +81,69 @@ module simple_gemac_wrapper .ll_data(rx_ll_data), .ll_sof(rx_ll_sof), .ll_eof(rx_ll_eof), .ll_error(), // error also encoded in sof/eof .ll_src_rdy(rx_ll_src_rdy), .ll_dst_rdy(rx_ll_dst_rdy)); - ll8_shortfifo rx_sfifo + ll8_to_fifo19 ll8_to_fifo19 (.clk(rx_clk), .reset(rx_reset), .clear(0), - .datain(rx_ll_data), .sof_i(rx_ll_sof), .eof_i(rx_ll_eof), - .error_i(0), .src_rdy_i(rx_ll_src_rdy), .dst_rdy_o(rx_ll_dst_rdy), - .dataout(rx_ll_data2), .sof_o(rx_ll_sof2), .eof_o(rx_ll_eof2), - .error_o(), .src_rdy_o(rx_ll_src_rdy2), .dst_rdy_i(rx_ll_dst_rdy2)); + .ll_data(rx_ll_data), .ll_sof(rx_ll_sof), .ll_eof(rx_ll_eof), + .ll_src_rdy(rx_ll_src_rdy), .ll_dst_rdy(rx_ll_dst_rdy), + .f19_data(rx_f19_data_int1), .f19_src_rdy_o(rx_f19_src_rdy_int1), .f19_dst_rdy_i(rx_f19_dst_rdy_int1)); - assign rx_ll_dst_rdy2 = ~rx_ll_dst_rdy2_n; - assign rx_ll_src_rdy2_n = ~rx_ll_src_rdy2; - assign rx_ll_sof2_n = ~rx_ll_sof2; - assign rx_ll_eof2_n = ~rx_ll_eof2; - - ll8_to_fifo36 ll8_to_fifo36 + fifo19_rxrealign fifo19_rxrealign + (.clk(rx_clk), .reset(rx_reset), .clear(0), + .datain(rx_f19_data_int1), .src_rdy_i(rx_f19_src_rdy_int1), .dst_rdy_o(rx_f19_dst_rdy_int1), + .dataout(rx_f19_data_int2), .src_rdy_o(rx_f19_src_rdy_int2), .dst_rdy_i(rx_f19_dst_rdy_int2) ); + + fifo19_to_fifo36 rx_fifo19_to_fifo36 (.clk(rx_clk), .reset(rx_reset), .clear(0), - .ll_data(rx_ll_data2), .ll_sof_n(rx_ll_sof2_n), .ll_eof_n(rx_ll_eof2_n), - .ll_src_rdy_n(rx_ll_src_rdy2_n), .ll_dst_rdy_n(rx_ll_dst_rdy2_n), - .f36_data(rx_f36_data_int1), .f36_src_rdy_o(rx_f36_src_rdy_int1), .f36_dst_rdy_i(rx_f36_dst_rdy_int1)); + .f19_datain(rx_f19_data_int2), .f19_src_rdy_i(rx_f19_src_rdy_int2), .f19_dst_rdy_o(rx_f19_dst_rdy_int2), + .f36_dataout(rx_f36_data_int), .f36_src_rdy_o(rx_f36_src_rdy_int), .f36_dst_rdy_i(rx_f36_dst_rdy_int) ); fifo_2clock_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_2clk_fifo - (.wclk(rx_clk), .datain(rx_f36_data_int1), - .src_rdy_i(rx_f36_src_rdy_int1), .dst_rdy_o(rx_f36_dst_rdy_int1), .space(rx_fifo_space), + (.wclk(rx_clk), .datain(rx_f36_data_int), + .src_rdy_i(rx_f36_src_rdy_int), .dst_rdy_o(rx_f36_dst_rdy_int), .space(rx_fifo_space), .rclk(sys_clk), .dataout(rx_f36_data), .src_rdy_o(rx_f36_src_rdy), .dst_rdy_i(rx_f36_dst_rdy), .occupied(), .arst(reset)); // TX FIFO Chain wire tx_ll_sof, tx_ll_eof, tx_ll_src_rdy, tx_ll_dst_rdy; - wire tx_ll_sof2, tx_ll_eof2, tx_ll_src_rdy2, tx_ll_dst_rdy2; - wire tx_ll_sof2_n, tx_ll_eof2_n, tx_ll_src_rdy2_n, tx_ll_dst_rdy2_n; - wire [7:0] tx_ll_data, tx_ll_data2; + wire [7:0] tx_ll_data; wire [35:0] tx_f36_data_int1; wire tx_f36_src_rdy_int1, tx_f36_dst_rdy_int1; fifo_2clock_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_2clk_fifo - (.wclk(sys_clk), .datain(tx_f36_data), - .src_rdy_i(tx_f36_src_rdy), .dst_rdy_o(tx_f36_dst_rdy), .space(), - .rclk(tx_clk), .dataout(tx_f36_data_int1), - .src_rdy_o(tx_f36_src_rdy_int1), .dst_rdy_i(tx_f36_dst_rdy_int1), .occupied(), .arst(reset)); + (.wclk(sys_clk), .datain(tx_f36_data), .src_rdy_i(tx_f36_src_rdy), .dst_rdy_o(tx_f36_dst_rdy), .space(), + .rclk(tx_clk), .dataout(tx_f36_data_int1), .src_rdy_o(tx_f36_src_rdy_int1), .dst_rdy_i(tx_f36_dst_rdy_int1), .occupied(), + .arst(reset)); fifo36_to_ll8 fifo36_to_ll8 (.clk(tx_clk), .reset(tx_reset), .clear(clear), .f36_data(tx_f36_data_int1), .f36_src_rdy_i(tx_f36_src_rdy_int1), .f36_dst_rdy_o(tx_f36_dst_rdy_int1), - .ll_data(tx_ll_data2), .ll_sof_n(tx_ll_sof2_n), .ll_eof_n(tx_ll_eof2_n), - .ll_src_rdy_n(tx_ll_src_rdy2_n), .ll_dst_rdy_n(tx_ll_dst_rdy2_n)); + .ll_data(tx_ll_data), .ll_sof(tx_ll_sof), .ll_eof(tx_ll_eof), + .ll_src_rdy(tx_ll_src_rdy), .ll_dst_rdy(tx_ll_dst_rdy)); - assign tx_ll_sof2 = ~tx_ll_sof2_n; - assign tx_ll_eof2 = ~tx_ll_eof2_n; - assign tx_ll_src_rdy2 = ~tx_ll_src_rdy2_n; - assign tx_ll_dst_rdy2_n = ~tx_ll_dst_rdy2; - - ll8_shortfifo tx_sfifo - (.clk(tx_clk), .reset(tx_reset), .clear(clear), - .datain(tx_ll_data2), .sof_i(tx_ll_sof2), .eof_i(tx_ll_eof2), - .error_i(0), .src_rdy_i(tx_ll_src_rdy2), .dst_rdy_o(tx_ll_dst_rdy2), - .dataout(tx_ll_data), .sof_o(tx_ll_sof), .eof_o(tx_ll_eof), - .error_o(), .src_rdy_o(tx_ll_src_rdy), .dst_rdy_i(tx_ll_dst_rdy)); - ll8_to_txmac ll8_to_txmac (.clk(tx_clk), .reset(tx_reset), .clear(clear), .ll_data(tx_ll_data), .ll_sof(tx_ll_sof), .ll_eof(tx_ll_eof), .ll_src_rdy(tx_ll_src_rdy), .ll_dst_rdy(tx_ll_dst_rdy), .tx_data(tx_data), .tx_valid(tx_valid), .tx_error(tx_error), .tx_ack(tx_ack)); + // Flow Control flow_ctrl_rx flow_ctrl_rx (.pause_request_en(pause_request_en), .pause_time(pause_time), .pause_thresh(pause_thresh), .rx_clk(rx_clk), .rx_reset(rx_reset), .rx_fifo_space(rx_fifo_space), .tx_clk(tx_clk), .tx_reset(tx_reset), .pause_req(pause_req), .pause_time_req(pause_time_req)); wire [31:0] debug_tx, debug_rx; - + assign debug_tx = { { tx_ll_data }, - { tx_ll_sof, tx_ll_eof, tx_ll_src_rdy, tx_ll_dst_rdy, - tx_ll_sof2, tx_ll_eof2, tx_ll_src_rdy2, tx_ll_dst_rdy2 }, + { tx_ll_sof, tx_ll_eof, tx_ll_src_rdy, tx_ll_dst_rdy, 4'b0 }, { tx_valid, tx_error, tx_ack, tx_f36_src_rdy_int1, tx_f36_dst_rdy_int1, tx_f36_data_int1[34:32]}, { tx_data} }; assign debug_rx = { { rx_ll_data }, - { rx_ll_sof, rx_ll_eof, rx_ll_src_rdy, rx_ll_dst_rdy, - rx_ll_sof2, rx_ll_eof2, rx_ll_src_rdy2, rx_ll_dst_rdy2 }, - { rx_valid, rx_error, rx_ack, rx_f36_src_rdy_int1, rx_f36_dst_rdy_int1, rx_f36_data_int1[34:32]}, + { rx_ll_sof, rx_ll_eof, rx_ll_src_rdy, rx_ll_dst_rdy, 4'b0 }, + { rx_valid, rx_error, rx_ack, rx_f36_src_rdy_int, rx_f36_dst_rdy_int, rx_f36_data_int[34:32]}, { rx_data} }; assign debug = debug_rx; endmodule // simple_gemac_wrapper + diff --git a/fpga/usrp2/simple_gemac/simple_gemac_wrapper19.v b/fpga/usrp2/simple_gemac/simple_gemac_wrapper19.v index 6cdbd1a59..c155b7d41 100644 --- a/fpga/usrp2/simple_gemac/simple_gemac_wrapper19.v +++ b/fpga/usrp2/simple_gemac/simple_gemac_wrapper19.v @@ -68,14 +68,10 @@ module simple_gemac_wrapper19 // RX FIFO Chain wire rx_ll_sof, rx_ll_eof, rx_ll_src_rdy, rx_ll_dst_rdy; + wire [7:0] rx_ll_data; - wire rx_ll_sof2, rx_ll_eof2, rx_ll_src_rdy2, rx_ll_dst_rdy2; - wire rx_ll_sof2_n, rx_ll_eof2_n, rx_ll_src_rdy2_n, rx_ll_dst_rdy2_n; - - wire [7:0] rx_ll_data, rx_ll_data2; - - wire [18:0] rx_f19_data_int1; - wire rx_f19_src_rdy_int1, rx_f19_dst_rdy_int1; + wire [18:0] rx_f19_data_int1, rx_f19_data_int2; + wire rx_f19_src_rdy_int1, rx_f19_dst_rdy_int1, rx_f19_src_rdy_int2, rx_f19_dst_rdy_int2; rxmac_to_ll8 rx_adapt (.clk(rx_clk), .reset(rx_reset), .clear(0), @@ -83,28 +79,21 @@ module simple_gemac_wrapper19 .ll_data(rx_ll_data), .ll_sof(rx_ll_sof), .ll_eof(rx_ll_eof), .ll_error(), // error also encoded in sof/eof .ll_src_rdy(rx_ll_src_rdy), .ll_dst_rdy(rx_ll_dst_rdy)); - ll8_shortfifo rx_sfifo - (.clk(rx_clk), .reset(rx_reset), .clear(0), - .datain(rx_ll_data), .sof_i(rx_ll_sof), .eof_i(rx_ll_eof), - .error_i(0), .src_rdy_i(rx_ll_src_rdy), .dst_rdy_o(rx_ll_dst_rdy), - .dataout(rx_ll_data2), .sof_o(rx_ll_sof2), .eof_o(rx_ll_eof2), - .error_o(), .src_rdy_o(rx_ll_src_rdy2), .dst_rdy_i(rx_ll_dst_rdy2)); - - assign rx_ll_dst_rdy2 = ~rx_ll_dst_rdy2_n; - assign rx_ll_src_rdy2_n = ~rx_ll_src_rdy2; - assign rx_ll_sof2_n = ~rx_ll_sof2; - assign rx_ll_eof2_n = ~rx_ll_eof2; - ll8_to_fifo19 ll8_to_fifo19 (.clk(rx_clk), .reset(rx_reset), .clear(0), - .ll_data(rx_ll_data2), .ll_sof_n(rx_ll_sof2_n), .ll_eof_n(rx_ll_eof2_n), - .ll_src_rdy_n(rx_ll_src_rdy2_n), .ll_dst_rdy_n(rx_ll_dst_rdy2_n), + .ll_data(rx_ll_data), .ll_sof(rx_ll_sof), .ll_eof(rx_ll_eof), + .ll_src_rdy(rx_ll_src_rdy), .ll_dst_rdy(rx_ll_dst_rdy), .f19_data(rx_f19_data_int1), .f19_src_rdy_o(rx_f19_src_rdy_int1), .f19_dst_rdy_i(rx_f19_dst_rdy_int1)); + fifo19_rxrealign fifo19_rxrealign + (.clk(rx_clk), .reset(rx_reset), .clear(0), + .datain(rx_f19_data_int1), .src_rdy_i(rx_f19_src_rdy_int1), .dst_rdy_o(rx_f19_dst_rdy_int1), + .dataout(rx_f19_data_int2), .src_rdy_o(rx_f19_src_rdy_int2), .dst_rdy_i(rx_f19_dst_rdy_int2) ); + //fifo_2clock_cascade #(.WIDTH(19), .SIZE(RXFIFOSIZE)) rx_2clk_fifo fifo_2clock_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_2clk_fifo - (.wclk(rx_clk), .datain(rx_f19_data_int1), - .src_rdy_i(rx_f19_src_rdy_int1), .dst_rdy_o(rx_f19_dst_rdy_int1), .space(rx_fifo_space), + (.wclk(rx_clk), .datain(rx_f19_data_int2), + .src_rdy_i(rx_f19_src_rdy_int2), .dst_rdy_o(rx_f19_dst_rdy_int2), .space(rx_fifo_space), .rclk(sys_clk), .dataout(rx_f19_data), .src_rdy_o(rx_f19_src_rdy), .dst_rdy_i(rx_f19_dst_rdy), .occupied(), .arst(reset)); @@ -160,8 +149,7 @@ module simple_gemac_wrapper19 { tx_valid, tx_error, tx_ack, tx_f19_src_rdy_int1, tx_f19_dst_rdy_int1, tx_f19_data_int1[18:16]}, { tx_data} }; assign debug_rx = { { rx_f19_src_rdy, rx_f19_dst_rdy, debug_state[5:0] }, - { rx_ll_sof, rx_ll_eof, rx_ll_src_rdy, rx_ll_dst_rdy, - rx_ll_sof2, rx_ll_eof2, rx_ll_src_rdy2, rx_ll_dst_rdy2 }, + { rx_ll_sof, rx_ll_eof, rx_ll_src_rdy, rx_ll_dst_rdy, 4'b0 }, { rx_valid, rx_error, rx_ack, rx_f19_src_rdy_int1, rx_f19_dst_rdy_int1, rx_f19_data_int1[18:16]}, { rx_data} }; diff --git a/fpga/usrp2/top/safe_u2plus/Makefile b/fpga/usrp2/top/safe_u2plus/Makefile index 62a02ff40..b72241050 100644 --- a/fpga/usrp2/top/safe_u2plus/Makefile +++ b/fpga/usrp2/top/safe_u2plus/Makefile @@ -117,7 +117,6 @@ coregen/fifo_xlnx_512x36_2clk.v \ coregen/fifo_xlnx_512x36_2clk.xco \ coregen/fifo_xlnx_64x36_2clk.v \ coregen/fifo_xlnx_64x36_2clk.xco \ -extram/wb_zbt16_b.v \ opencores/8b10b/decode_8b10b.v \ opencores/8b10b/encode_8b10b.v \ opencores/aemb/rtl/verilog/aeMB_bpcu.v \ diff --git a/fpga/usrp2/top/u1e/Makefile b/fpga/usrp2/top/u1e/Makefile index 3cb9fd8f3..5d721979b 100644 --- a/fpga/usrp2/top/u1e/Makefile +++ b/fpga/usrp2/top/u1e/Makefile @@ -23,7 +23,6 @@ include ../../opencores/Makefile.srcs include ../../vrt/Makefile.srcs include ../../udp/Makefile.srcs include ../../coregen/Makefile.srcs -include ../../extram/Makefile.srcs include ../../gpmc/Makefile.srcs ################################################## diff --git a/fpga/usrp2/top/u1e/u1e_core.v b/fpga/usrp2/top/u1e/u1e_core.v index 7d5924bea..b3d71b4ab 100644 --- a/fpga/usrp2/top/u1e/u1e_core.v +++ b/fpga/usrp2/top/u1e/u1e_core.v @@ -1,9 +1,5 @@ -//`define LOOPBACK 1 -//`define TIMED 1 -`define DSP 1 - module u1e_core (input clk_fpga, input rst_fpga, output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk, @@ -48,13 +44,18 @@ module u1e_core wire pps_int; wire [63:0] vita_time, vita_time_pps; reg [15:0] reg_leds, reg_cgen_ctrl, reg_test, xfer_rate; + wire [7:0] test_rate; + wire [3:0] test_ctrl; wire [7:0] set_addr; wire [31:0] set_data; wire set_stb; wire [31:0] debug_vt; - + wire rx_overrun_dsp, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc; + assign rx_overrun = rx_overrun_gpmc | rx_overrun_dsp; + assign tx_underrun = tx_underrun_gpmc | tx_underrun_dsp; + setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(),.changed(global_reset)); @@ -79,7 +80,6 @@ module u1e_core tx_err_src_rdy, tx_err_dst_rdy; reg [15:0] tx_frame_len; wire [15:0] rx_frame_len; - wire [7:0] rate; wire bus_error; wire clear_tx, clear_rx; @@ -111,62 +111,15 @@ module u1e_core .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), .tx_frame_len(tx_frame_len), .rx_frame_len(rx_frame_len), + .tx_underrun(tx_underrun_gpmc), .rx_overrun(rx_overrun_gpmc), + + .test_rate(test_rate), .test_ctrl(test_ctrl), .debug(debug_gpmc)); wire rx_sof = rx_data[32]; wire rx_eof = rx_data[33]; wire rx_src_rdy_int, rx_dst_rdy_int, tx_src_rdy_int, tx_dst_rdy_int; -`ifdef LOOPBACK - wire [7:0] WHOAMI = 1; - - fifo_cascade #(.WIDTH(36), .SIZE(12)) loopback_fifo - (.clk(wb_clk), .reset(wb_rst), .clear(clear_tx | clear_rx), - .datain(tx_data), .src_rdy_i(tx_src_rdy), .dst_rdy_o(tx_dst_rdy), - .dataout(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); - - assign tx_underrun = 0; - assign rx_overrun = 0; - - wire run_tx, run_rx, strobe_tx, strobe_rx; -`endif // LOOPBACK - -`ifdef TIMED - wire [7:0] WHOAMI = 2; - - // TX side - wire tx_enable; - - fifo_pacer tx_pacer - (.clk(wb_clk), .reset(wb_rst), .rate(rate), .enable(tx_enable), - .src1_rdy_i(tx_src_rdy), .dst1_rdy_o(tx_dst_rdy), - .src2_rdy_o(tx_src_rdy_int), .dst2_rdy_i(tx_dst_rdy_int), - .underrun(tx_underrun), .overrun()); - - packet_verifier32 pktver32 - (.clk(wb_clk), .reset(wb_rst), .clear(clear_tx), - .data_i(tx_data), .src_rdy_i(tx_src_rdy_int), .dst_rdy_o(tx_dst_rdy_int), - .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); - - // RX side - wire rx_enable; - - packet_generator32 pktgen32 - (.clk(wb_clk), .reset(wb_rst), .clear(clear_rx), - .data_o(rx_data), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int)); - - fifo_pacer rx_pacer - (.clk(wb_clk), .reset(wb_rst), .rate(rate), .enable(rx_enable), - .src1_rdy_i(rx_src_rdy_int), .dst1_rdy_o(rx_dst_rdy_int), - .src2_rdy_o(rx_src_rdy), .dst2_rdy_i(rx_dst_rdy), - .underrun(), .overrun(rx_overrun)); - - wire run_tx, run_rx, strobe_tx, strobe_rx; -`endif // `ifdef TIMED - -`ifdef DSP - wire [7:0] WHOAMI = 0; - wire [31:0] debug_rx_dsp, vrc_debug, vrf_debug; // ///////////////////////////////////////////////////////////////////////// @@ -189,7 +142,7 @@ module u1e_core vita_rx_control #(.BASE(SR_RX_CTRL), .WIDTH(32)) vita_rx_control (.clk(wb_clk), .reset(wb_rst), .clear(clear_rx), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .vita_time(vita_time), .overrun(rx_overrun), + .vita_time(vita_time), .overrun(rx_overrun_dsp), .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), .sample_fifo_o(rx1_data), .sample_fifo_dst_rdy_i(rx1_dst_rdy), .sample_fifo_src_rdy_o(rx1_src_rdy), .debug_rx(vrc_debug)); @@ -199,7 +152,6 @@ module u1e_core .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .sample_fifo_i(rx1_data), .sample_fifo_dst_rdy_o(rx1_dst_rdy), .sample_fifo_src_rdy_i(rx1_src_rdy), .data_o(vita_rx_data), .dst_rdy_i(vita_rx_dst_rdy), .src_rdy_o(vita_rx_src_rdy), - .fifo_occupied(), .fifo_full(), .fifo_empty(), .debug_rx(vrf_debug) ); fifo36_mux #(.prio(0)) mux_err_stream @@ -225,29 +177,12 @@ module u1e_core .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), .dac_a(tx_i_int),.dac_b(tx_q_int), - .underrun(underrun), .run(run_tx), + .underrun(tx_underrun_dsp), .run(run_tx), .debug(debug_vt)); assign tx_i = tx_i_int[15:2]; assign tx_q = tx_q_int[15:2]; -`else // !`ifdef DSP - // Dummy DSP signal generator for test purposes - wire [23:0] tx_i_int, tx_q_int; - wire [23:0] freq = {reg_test,8'd0}; - reg [23:0] phase; - - always @(posedge wb_clk) - phase <= phase + freq; - - cordic_z24 #(.bitwidth(24)) tx_cordic - (.clock(wb_clk), .reset(wb_rst), .enable(1), - .xi(24'd2500000), .yi(24'd0), .zi(phase), .xo(tx_i_int), .yo(tx_q_int), .zo()); - - assign tx_i = tx_i_int[23:10]; - assign tx_q = tx_q_int[23:10]; -`endif // !`ifdef DSP - // ///////////////////////////////////////////////////////////////////////////////////// // Wishbone Intercon, single master wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso, @@ -320,7 +255,6 @@ module u1e_core // Slave 0, Misc LEDs, Switches, controls localparam REG_LEDS = 7'd0; // out - localparam REG_SWITCHES = 7'd2; // in localparam REG_CGEN_CTRL = 7'd4; // out localparam REG_CGEN_ST = 7'd6; // in localparam REG_TEST = 7'd8; // out @@ -353,20 +287,18 @@ module u1e_core xfer_rate <= s0_dat_mosi; endcase // case (s0_adr[6:0]) - assign tx_enable = xfer_rate[15]; - assign rx_enable = xfer_rate[14]; - assign rate = xfer_rate[7:0]; + assign test_ctrl = xfer_rate[11:8]; + assign test_rate = xfer_rate[7:0]; assign { debug_led[3:0] } = ~{run_rx,run_tx,reg_leds[1:0]}; assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl; assign s0_dat_miso = (s0_adr[6:0] == REG_LEDS) ? reg_leds : - (s0_adr[6:0] == REG_SWITCHES) ? { 16'd0 } : (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl : (s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} : (s0_adr[6:0] == REG_TEST) ? reg_test : (s0_adr[6:0] == REG_RX_FRAMELEN) ? rx_frame_len : - (s0_adr[6:0] == REG_COMPAT) ? { WHOAMI, COMPAT_NUM } : + (s0_adr[6:0] == REG_COMPAT) ? { 8'd0, COMPAT_NUM } : 16'hBEEF; assign s0_ack = s0_stb & s0_cyc; @@ -475,10 +407,14 @@ module u1e_core assign debug_clk = { EM_CLK, clk_fpga }; +/* assign debug = { { rx_have_data, tx_have_space, EM_NCS6, EM_NCS5, EM_NCS4, EM_NWE, EM_NOE, rx_overrun }, { tx_src_rdy, tx_src_rdy_int, tx_dst_rdy, tx_dst_rdy_int, rx_src_rdy, rx_src_rdy_int, rx_dst_rdy, rx_dst_rdy_int }, { EM_D } }; +*/ + assign debug = debug_gpmc; + assign debug_gpio_0 = { {run_tx, strobe_tx, run_rx, strobe_rx, tx_i[11:0]}, {2'b00, tx_src_rdy, tx_dst_rdy, tx_q[11:0]} }; diff --git a/fpga/usrp2/top/u1e_passthru/Makefile b/fpga/usrp2/top/u1e_passthru/Makefile index d1950629b..f2d835608 100644 --- a/fpga/usrp2/top/u1e_passthru/Makefile +++ b/fpga/usrp2/top/u1e_passthru/Makefile @@ -23,7 +23,6 @@ include ../../opencores/Makefile.srcs include ../../vrt/Makefile.srcs include ../../udp/Makefile.srcs include ../../coregen/Makefile.srcs -include ../../extram/Makefile.srcs include ../../gpmc/Makefile.srcs ################################################## @@ -51,7 +50,7 @@ passthru.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ -$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) \ $(GPMC_SRCS) ################################################## diff --git a/fpga/usrp2/top/u2_rev3/Makefile b/fpga/usrp2/top/u2_rev3/Makefile index 05ada2476..e9b43491a 100644 --- a/fpga/usrp2/top/u2_rev3/Makefile +++ b/fpga/usrp2/top/u2_rev3/Makefile @@ -23,7 +23,6 @@ include ../../opencores/Makefile.srcs include ../../vrt/Makefile.srcs include ../../udp/Makefile.srcs include ../../coregen/Makefile.srcs -include ../../extram/Makefile.srcs include ../../extramfifo/Makefile.srcs diff --git a/fpga/usrp2/top/u2_rev3/u2_core.v b/fpga/usrp2/top/u2_rev3/u2_core.v index ab2ed49f0..79470de9e 100644 --- a/fpga/usrp2/top/u2_rev3/u2_core.v +++ b/fpga/usrp2/top/u2_rev3/u2_core.v @@ -3,7 +3,6 @@ // //////////////////////////////////////////////////////////////////////////////// module u2_core - #(parameter RAM_SIZE=16384, parameter RAM_AW=14) (// Clocks input dsp_clk, input wb_clk, @@ -137,20 +136,24 @@ module u2_core input [3:0] clock_divider ); - localparam SR_BUF_POOL = 64; // Uses 1 reg + localparam SR_MISC = 0; // Uses 9 regs + localparam SR_BUF_POOL = 64; // Uses 4 regs localparam SR_UDP_SM = 96; // 64 regs - localparam SR_RX_DSP = 160; // 16 - localparam SR_RX_CTRL = 176; // 16 + localparam SR_RX_DSP0 = 160; // 16 + localparam SR_RX_CTRL0 = 176; // 16 localparam SR_TIME64 = 192; // 3 localparam SR_SIMTIMER = 198; // 2 localparam SR_TX_DSP = 208; // 16 localparam SR_TX_CTRL = 224; // 16 - + localparam SR_RX_DSP1 = 240; + localparam SR_RX_CTRL1 = 32; + + // FIFO Sizes, 9 = 512 lines, 10 = 1024, 11 = 2048 // all (most?) are 36 bits wide, so 9 is 1 BRAM, 10 is 2, 11 is 4 BRAMs - localparam DSP_TX_FIFOSIZE = 10; + // localparam DSP_TX_FIFOSIZE = 9; unused -- DSPTX uses extram fifo localparam DSP_RX_FIFOSIZE = 10; - localparam ETH_TX_FIFOSIZE = 10; + localparam ETH_TX_FIFOSIZE = 9; localparam ETH_RX_FIFOSIZE = 11; localparam SERDES_TX_FIFOSIZE = 9; localparam SERDES_RX_FIFOSIZE = 9; // RX currently doesn't use a fifo? @@ -159,13 +162,14 @@ module u2_core wire [31:0] set_data, set_data_dsp; wire set_stb, set_stb_dsp; - wire ram_loader_done; - wire ram_loader_rst, wb_rst, dsp_rst; - assign dsp_rst = wb_rst; - + wire ram_loader_done, ram_loader_rst; + wire wb_rst; + wire dsp_rst = wb_rst; + wire [31:0] status; wire bus_error, spi_int, i2c_int, pps_int, onetime_int, periodic_int, buffer_int; - wire proc_int, overrun, underrun, uart_tx_int, uart_rx_int; + wire proc_int, overrun0, overrun1, underrun; + wire uart_tx_int, uart_rx_int; wire [31:0] debug_gpio_0, debug_gpio_1; wire [31:0] atr_lines; @@ -182,10 +186,8 @@ module u2_core wire [31:0] irq; wire [63:0] vita_time, vita_time_pps; - wire run_rx, run_tx; - reg run_rx_d1; - always @(posedge dsp_clk) - run_rx_d1 <= run_rx; + wire run_rx0, run_rx1, run_tx; + reg run_rx0_d1, run_rx1_d1; // /////////////////////////////////////////////////////////////////////////////////////////////// // Wishbone Single Master INTERCON @@ -291,7 +293,7 @@ module u2_core wire [15:0] ram_loader_adr; wire [3:0] ram_loader_sel; wire ram_loader_stb, ram_loader_we; - ram_loader #(.AWIDTH(aw),.RAM_SIZE(RAM_SIZE)) + ram_loader #(.AWIDTH(aw),.RAM_SIZE(16384)) ram_loader (.wb_clk(wb_clk),.dsp_clk(dsp_clk),.ram_loader_rst(ram_loader_rst), .wb_dat(ram_loader_dat),.wb_adr(ram_loader_adr), .wb_stb(ram_loader_stb),.wb_sel(ram_loader_sel), @@ -324,21 +326,21 @@ module u2_core // I-port connects directly to processor and ram loader wire flush_icache; - ram_harvard #(.AWIDTH(RAM_AW),.RAM_SIZE(RAM_SIZE),.ICWIDTH(7),.DCWIDTH(6)) + ram_harvard #(.AWIDTH(14),.RAM_SIZE(16384),.ICWIDTH(7),.DCWIDTH(6)) sys_ram(.wb_clk_i(wb_clk),.wb_rst_i(wb_rst), - .ram_loader_adr_i(ram_loader_adr[RAM_AW-1:0]), .ram_loader_dat_i(ram_loader_dat), + .ram_loader_adr_i(ram_loader_adr[13:0]), .ram_loader_dat_i(ram_loader_dat), .ram_loader_stb_i(ram_loader_stb), .ram_loader_sel_i(ram_loader_sel), .ram_loader_we_i(ram_loader_we), .ram_loader_done_i(ram_loader_done), .if_adr(16'b0), .if_data(), - .dwb_adr_i(s0_adr[RAM_AW-1:0]), .dwb_dat_i(s0_dat_o), .dwb_dat_o(s0_dat_i), + .dwb_adr_i(s0_adr[13:0]), .dwb_dat_i(s0_dat_o), .dwb_dat_o(s0_dat_i), .dwb_we_i(s0_we), .dwb_ack_o(s0_ack), .dwb_stb_i(s0_stb), .dwb_sel_i(s0_sel), .flush_icache(flush_icache)); - setting_reg #(.my_addr(7)) sr_icache (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+7)) sr_icache (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(),.changed(flush_icache)); // ///////////////////////////////////////////////////////////////////////// @@ -347,15 +349,13 @@ module u2_core wire rd1_ready_i, rd1_ready_o; wire rd2_ready_i, rd2_ready_o; wire rd3_ready_i, rd3_ready_o; - wire [3:0] rd0_flags, rd1_flags, rd2_flags, rd3_flags; - wire [31:0] rd0_dat, rd1_dat, rd2_dat, rd3_dat; + wire [35:0] rd0_dat, rd1_dat, rd2_dat, rd3_dat; wire wr0_ready_i, wr0_ready_o; wire wr1_ready_i, wr1_ready_o; wire wr2_ready_i, wr2_ready_o; wire wr3_ready_i, wr3_ready_o; - wire [3:0] wr0_flags, wr1_flags, wr2_flags, wr3_flags; - wire [31:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat; + wire [35:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat; wire [35:0] tx_err_data; wire tx_err_src_rdy, tx_err_dst_rdy; @@ -373,14 +373,15 @@ module u2_core .status(status), .sys_int_o(buffer_int), .debug(router_debug), - .ser_inp_data({wr0_flags, wr0_dat}), .ser_inp_valid(wr0_ready_i), .ser_inp_ready(wr0_ready_o), - .dsp_inp_data({wr1_flags, wr1_dat}), .dsp_inp_valid(wr1_ready_i), .dsp_inp_ready(wr1_ready_o), - .eth_inp_data({wr2_flags, wr2_dat}), .eth_inp_valid(wr2_ready_i), .eth_inp_ready(wr2_ready_o), + .ser_inp_data(wr0_dat), .ser_inp_valid(wr0_ready_i), .ser_inp_ready(wr0_ready_o), + .dsp0_inp_data(wr1_dat), .dsp0_inp_valid(wr1_ready_i), .dsp0_inp_ready(wr1_ready_o), + .dsp1_inp_data(wr3_dat), .dsp1_inp_valid(wr3_ready_i), .dsp1_inp_ready(wr3_ready_o), + .eth_inp_data(wr2_dat), .eth_inp_valid(wr2_ready_i), .eth_inp_ready(wr2_ready_o), .err_inp_data(tx_err_data), .err_inp_ready(tx_err_dst_rdy), .err_inp_valid(tx_err_src_rdy), - .ser_out_data({rd0_flags, rd0_dat}), .ser_out_valid(rd0_ready_o), .ser_out_ready(rd0_ready_i), - .dsp_out_data({rd1_flags, rd1_dat}), .dsp_out_valid(rd1_ready_o), .dsp_out_ready(rd1_ready_i), - .eth_out_data({rd2_flags, rd2_dat}), .eth_out_valid(rd2_ready_o), .eth_out_ready(rd2_ready_i) + .ser_out_data(rd0_dat), .ser_out_valid(rd0_ready_o), .ser_out_ready(rd0_ready_i), + .dsp_out_data(rd1_dat), .dsp_out_valid(rd1_ready_o), .dsp_out_ready(rd1_ready_i), + .eth_out_data(rd2_dat), .eth_out_valid(rd2_ready_o), .eth_out_ready(rd2_ready_i) ); // ///////////////////////////////////////////////////////////////////////// @@ -416,7 +417,7 @@ module u2_core // Buffer Pool Status -- Slave #5 //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = 32'd4; + localparam compat_num = 32'd5; wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), @@ -432,56 +433,21 @@ module u2_core // ///////////////////////////////////////////////////////////////////////// // Ethernet MAC Slave #6 - wire [18:0] rx_f19_data, tx_f19_data; - wire rx_f19_src_rdy, rx_f19_dst_rdy, tx_f19_src_rdy, tx_f19_dst_rdy; - - simple_gemac_wrapper19 #(.RXFIFOSIZE(11), .TXFIFOSIZE(6)) simple_gemac_wrapper19 + simple_gemac_wrapper #(.RXFIFOSIZE(ETH_RX_FIFOSIZE), + .TXFIFOSIZE(ETH_TX_FIFOSIZE)) simple_gemac_wrapper19 (.clk125(clk_to_mac), .reset(wb_rst), .GMII_GTX_CLK(GMII_GTX_CLK), .GMII_TX_EN(GMII_TX_EN), .GMII_TX_ER(GMII_TX_ER), .GMII_TXD(GMII_TXD), .GMII_RX_CLK(GMII_RX_CLK), .GMII_RX_DV(GMII_RX_DV), .GMII_RX_ER(GMII_RX_ER), .GMII_RXD(GMII_RXD), .sys_clk(dsp_clk), - .rx_f19_data(rx_f19_data), .rx_f19_src_rdy(rx_f19_src_rdy), .rx_f19_dst_rdy(rx_f19_dst_rdy), - .tx_f19_data(tx_f19_data), .tx_f19_src_rdy(tx_f19_src_rdy), .tx_f19_dst_rdy(tx_f19_dst_rdy), + .rx_f36_data(wr2_dat), .rx_f36_src_rdy(wr2_ready_i), .rx_f36_dst_rdy(wr2_ready_o), + .tx_f36_data(rd2_dat), .tx_f36_src_rdy(rd2_ready_o), .tx_f36_dst_rdy(rd2_ready_i), .wb_clk(wb_clk), .wb_rst(wb_rst), .wb_stb(s6_stb), .wb_cyc(s6_cyc), .wb_ack(s6_ack), .wb_we(s6_we), .wb_adr(s6_adr), .wb_dat_i(s6_dat_o), .wb_dat_o(s6_dat_i), .mdio(MDIO), .mdc(MDC), .debug(debug_mac)); - wire [35:0] rx_f36_data, tx_f36_data; - wire rx_f36_src_rdy, rx_f36_dst_rdy, tx_f36_src_rdy, tx_f36_dst_rdy; - - wire [18:0] _rx_f19_data; - wire _rx_f19_src_rdy, _rx_f19_dst_rdy; - - //mac rx to eth input... - fifo19_rxrealign fifo19_rxrealign - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .datain(rx_f19_data), .src_rdy_i(rx_f19_src_rdy), .dst_rdy_o(rx_f19_dst_rdy), - .dataout(_rx_f19_data), .src_rdy_o(_rx_f19_src_rdy), .dst_rdy_i(_rx_f19_dst_rdy) ); - - fifo19_to_fifo36 eth_inp_fifo19_to_fifo36 - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .f19_datain(_rx_f19_data), .f19_src_rdy_i(_rx_f19_src_rdy), .f19_dst_rdy_o(_rx_f19_dst_rdy), - .f36_dataout(rx_f36_data), .f36_src_rdy_o(rx_f36_src_rdy), .f36_dst_rdy_i(rx_f36_dst_rdy) ); - - fifo_cascade #(.WIDTH(36), .SIZE(ETH_RX_FIFOSIZE)) rx_eth_fifo - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .datain(rx_f36_data), .src_rdy_i(rx_f36_src_rdy), .dst_rdy_o(rx_f36_dst_rdy), - .dataout({wr2_flags,wr2_dat}), .src_rdy_o(wr2_ready_i), .dst_rdy_i(wr2_ready_o)); - - //eth output to mac tx... - fifo_cascade #(.WIDTH(36), .SIZE(ETH_TX_FIFOSIZE)) tx_eth_fifo - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .datain({rd2_flags,rd2_dat}), .src_rdy_i(rd2_ready_o), .dst_rdy_o(rd2_ready_i), - .dataout(tx_f36_data), .src_rdy_o(tx_f36_src_rdy), .dst_rdy_i(tx_f36_dst_rdy)); - - fifo36_to_fifo19 eth_out_fifo36_to_fifo19 - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .f36_datain(tx_f36_data), .f36_src_rdy_i(tx_f36_src_rdy), .f36_dst_rdy_o(tx_f36_dst_rdy), - .f19_dataout(tx_f19_data), .f19_src_rdy_o(tx_f19_src_rdy), .f19_dst_rdy_i(tx_f19_dst_rdy) ); - // ///////////////////////////////////////////////////////////////////////// // Settings Bus -- Slave #7 settings_bus settings_bus @@ -504,13 +470,13 @@ module u2_core wire phy_reset; assign PHY_RESETn = ~phy_reset; - setting_reg #(.my_addr(0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), .in(set_data),.out(clock_outs),.changed()); - setting_reg #(.my_addr(1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(serdes_outs),.changed()); - setting_reg #(.my_addr(2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(adc_outs),.changed()); - setting_reg #(.my_addr(4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(phy_reset),.changed()); // ///////////////////////////////////////////////////////////////////////// @@ -520,12 +486,12 @@ module u2_core // In Rev3 there are only 6 leds, and the highest one is on the ETH connector wire [7:0] led_src, led_sw; - wire [7:0] led_hw = {run_tx, run_rx, clk_status, serdes_link_up, 1'b0}; + wire [7:0] led_hw = {run_tx, (run_rx0_d1 | run_rx1_d1), clk_status, serdes_link_up, 1'b0}; - setting_reg #(.my_addr(3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_sw),.changed()); - setting_reg #(.my_addr(8),.width(8), .at_reset(8'b0001_1110)) + setting_reg #(.my_addr(SR_MISC+8),.width(8), .at_reset(8'b0001_1110)) sr_led_src (.clk(wb_clk),.rst(wb_rst), .strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_src),.changed()); assign leds = (led_src & led_hw) | (~led_src & led_sw); @@ -537,7 +503,7 @@ module u2_core wire underrun_wb, overrun_wb, pps_wb; oneshot_2clk underrun_1s (.clk_in(dsp_clk), .in(underrun), .clk_out(wb_clk), .out(underrun_wb)); - oneshot_2clk overrun_1s (.clk_in(dsp_clk), .in(overrun), .clk_out(wb_clk), .out(overrun_wb)); + oneshot_2clk overrun_1s (.clk_in(dsp_clk), .in(overrun0 | overrun1), .clk_out(wb_clk), .out(overrun_wb)); oneshot_2clk pps_1s (.clk_in(dsp_clk), .in(pps_int), .clk_out(wb_clk), .out(pps_wb)); assign irq= {{8'b0}, @@ -580,7 +546,7 @@ module u2_core (.clk_i(wb_clk),.rst_i(wb_rst), .adr_i(sb_adr[5:0]),.sel_i(sb_sel),.dat_i(sb_dat_o),.dat_o(sb_dat_i), .we_i(sb_we),.stb_i(sb_stb),.cyc_i(sb_cyc),.ack_o(sb_ack), - .run_rx(run_rx_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) ); + .run_rx(run_rx0_d1 | run_rx1_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) ); // ////////////////////////////////////////////////////////////////////////// // Time Sync, Slave #12 @@ -601,50 +567,60 @@ module u2_core assign sd_dat_i[31:8] = 0; // ///////////////////////////////////////////////////////////////////////// - // DSP RX - wire [31:0] sample_rx, sample_tx; - wire strobe_rx, strobe_tx; - wire rx_dst_rdy, rx_src_rdy, rx1_dst_rdy, rx1_src_rdy; - wire [99:0] rx_data; - wire [35:0] rx1_data; - - dsp_core_rx #(.BASE(SR_RX_DSP)) dsp_core_rx + // DSP RX 0 + wire [31:0] sample_rx0; + wire clear_rx0, strobe_rx0; + + always @(posedge dsp_clk) + run_rx0_d1 <= run_rx0; + + dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b), - .sample(sample_rx), .run(run_rx_d1), .strobe(strobe_rx), - .debug(debug_rx_dsp) ); + .sample(sample_rx0), .run(run_rx0_d1), .strobe(strobe_rx0), + .debug() ); - wire [31:0] vrc_debug; - wire clear_rx; - - setting_reg #(.my_addr(SR_RX_CTRL+3)) sr_clear + setting_reg #(.my_addr(SR_RX_CTRL0+3)) sr_clear_rx0 (.clk(dsp_clk),.rst(dsp_rst), .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), - .out(),.changed(clear_rx)); + .out(),.changed(clear_rx0)); - vita_rx_control #(.BASE(SR_RX_CTRL), .WIDTH(32)) vita_rx_control - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx), + vita_rx_chain #(.BASE(SR_RX_CTRL0),.UNIT(0),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain0 + (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx0), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .vita_time(vita_time), .overrun(overrun), - .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), - .sample_fifo_o(rx_data), .sample_fifo_dst_rdy_i(rx_dst_rdy), .sample_fifo_src_rdy_o(rx_src_rdy), - .debug_rx(vrc_debug)); + .vita_time(vita_time), .overrun(overrun0), + .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), + .rx_data_o(wr1_dat), .rx_src_rdy_o(wr1_ready_i), .rx_dst_rdy_i(wr1_ready_o), + .debug() ); - wire [3:0] vita_state; + // ///////////////////////////////////////////////////////////////////////// + // DSP RX 1 + wire [31:0] sample_rx1; + wire clear_rx1, strobe_rx1; + + always @(posedge dsp_clk) + run_rx1_d1 <= run_rx1; - vita_rx_framer #(.BASE(SR_RX_CTRL), .MAXCHAN(1)) vita_rx_framer - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx), + dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 + (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .sample_fifo_i(rx_data), .sample_fifo_dst_rdy_o(rx_dst_rdy), .sample_fifo_src_rdy_i(rx_src_rdy), - .data_o(rx1_data), .dst_rdy_i(rx1_dst_rdy), .src_rdy_o(rx1_src_rdy), - .fifo_occupied(), .fifo_full(), .fifo_empty(), - .debug_rx(vita_state) ); + .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b), + .sample(sample_rx1), .run(run_rx1_d1), .strobe(strobe_rx1), + .debug() ); + + setting_reg #(.my_addr(SR_RX_CTRL1+3)) sr_clear_rx1 + (.clk(dsp_clk),.rst(dsp_rst), + .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), + .out(),.changed(clear_rx1)); - fifo_cascade #(.WIDTH(36), .SIZE(DSP_RX_FIFOSIZE)) rx_fifo_cascade - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx), - .datain(rx1_data), .src_rdy_i(rx1_src_rdy), .dst_rdy_o(rx1_dst_rdy), - .dataout({wr1_flags,wr1_dat}), .src_rdy_o(wr1_ready_i), .dst_rdy_i(wr1_ready_o)); + vita_rx_chain #(.BASE(SR_RX_CTRL1),.UNIT(2),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain1 + (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx1), + .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .vita_time(vita_time), .overrun(overrun1), + .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), + .rx_data_o(wr3_dat), .rx_src_rdy_o(wr3_ready_i), .rx_dst_rdy_i(wr3_ready_o), + .debug() ); // /////////////////////////////////////////////////////////////////////////////////// // DSP TX @@ -672,10 +648,10 @@ module u2_core .RAM_LDn(RAM_LDn), .RAM_OEn(RAM_OEn), .RAM_CE1n(RAM_CE1n), - .datain({rd1_flags[3:2],rd1_dat[31:16],rd1_flags[1:0],rd1_dat[15:0]}), + .datain(rd1_dat), .src_rdy_i(rd1_ready_o), .dst_rdy_o(rd1_ready_i), - .dataout({tx_data[35:34],tx_data[31:16],tx_data[33:32],tx_data[15:0]}), + .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy), .debug(debug_extfifo), @@ -701,9 +677,9 @@ module u2_core serdes #(.TXFIFOSIZE(SERDES_TX_FIFOSIZE),.RXFIFOSIZE(SERDES_RX_FIFOSIZE)) serdes (.clk(dsp_clk),.rst(dsp_rst), .ser_tx_clk(ser_tx_clk),.ser_t(ser_t),.ser_tklsb(ser_tklsb),.ser_tkmsb(ser_tkmsb), - .rd_dat_i(rd0_dat),.rd_flags_i(rd0_flags),.rd_ready_o(rd0_ready_i),.rd_ready_i(rd0_ready_o), + .rd_dat_i(rd0_dat[31:0]),.rd_flags_i(rd0_dat[35:32]),.rd_ready_o(rd0_ready_i),.rd_ready_i(rd0_ready_o), .ser_rx_clk(ser_rx_clk),.ser_r(ser_r),.ser_rklsb(ser_rklsb),.ser_rkmsb(ser_rkmsb), - .wr_dat_o(wr0_dat),.wr_flags_o(wr0_flags),.wr_ready_o(wr0_ready_i),.wr_ready_i(wr0_ready_o), + .wr_dat_o(wr0_dat[31:0]),.wr_flags_o(wr0_dat[35:32]),.wr_ready_o(wr0_ready_i),.wr_ready_i(wr0_ready_o), .tx_occupied(ser_tx_occ),.tx_full(ser_tx_full),.tx_empty(ser_tx_empty), .rx_occupied(ser_rx_occ),.rx_full(ser_rx_full),.rx_empty(ser_rx_empty), .serdes_link_up(serdes_link_up),.debug0(debug_serdes0), .debug1(debug_serdes1) ); @@ -725,7 +701,7 @@ module u2_core // Debug Pins assign debug_clk = 2'b00; // {dsp_clk, clk_to_mac}; - assign debug = 32'd0; // debug_extfifo; + assign debug = 32'd0; assign debug_gpio_0 = 32'd0; assign debug_gpio_1 = 32'd0; diff --git a/fpga/usrp2/top/u2_rev3/u2_rev3.v b/fpga/usrp2/top/u2_rev3/u2_rev3.v index 759f7b7b8..bc7ae5f16 100644 --- a/fpga/usrp2/top/u2_rev3/u2_rev3.v +++ b/fpga/usrp2/top/u2_rev3/u2_rev3.v @@ -471,7 +471,7 @@ module u2_rev3 // - u2_core #(.RAM_SIZE(16384), .RAM_AW(14)) + u2_core u2_core(.dsp_clk (dsp_clk), .wb_clk (wb_clk), .clock_ready (clock_ready), diff --git a/fpga/usrp2/top/u2_rev3_2rx_iad/Makefile b/fpga/usrp2/top/u2_rev3_2rx_iad/Makefile index 5b7ed5a8e..334089839 100644 --- a/fpga/usrp2/top/u2_rev3_2rx_iad/Makefile +++ b/fpga/usrp2/top/u2_rev3_2rx_iad/Makefile @@ -120,7 +120,6 @@ eth/rtl/verilog/flow_ctrl_tx.v \ eth/rtl/verilog/miim/eth_clockgen.v \ eth/rtl/verilog/miim/eth_outputcontrol.v \ eth/rtl/verilog/miim/eth_shiftreg.v \ -extram/wb_zbt16_b.v \ opencores/8b10b/decode_8b10b.v \ opencores/8b10b/encode_8b10b.v \ opencores/aemb/rtl/verilog/aeMB_bpcu.v \ diff --git a/fpga/usrp2/top/u2_rev3_iad/Makefile b/fpga/usrp2/top/u2_rev3_iad/Makefile index 5ae8846dd..15df9e43e 100644 --- a/fpga/usrp2/top/u2_rev3_iad/Makefile +++ b/fpga/usrp2/top/u2_rev3_iad/Makefile @@ -120,7 +120,6 @@ eth/rtl/verilog/flow_ctrl_tx.v \ eth/rtl/verilog/miim/eth_clockgen.v \ eth/rtl/verilog/miim/eth_outputcontrol.v \ eth/rtl/verilog/miim/eth_shiftreg.v \ -extram/wb_zbt16_b.v \ opencores/8b10b/decode_8b10b.v \ opencores/8b10b/encode_8b10b.v \ opencores/aemb/rtl/verilog/aeMB_bpcu.v \ diff --git a/fpga/usrp2/top/u2plus/Makefile b/fpga/usrp2/top/u2plus/Makefile index c38bd3ec1..38400ce62 100644 --- a/fpga/usrp2/top/u2plus/Makefile +++ b/fpga/usrp2/top/u2plus/Makefile @@ -23,7 +23,6 @@ include ../../opencores/Makefile.srcs include ../../vrt/Makefile.srcs include ../../udp/Makefile.srcs include ../../coregen/Makefile.srcs -include ../../extram/Makefile.srcs include ../../extramfifo/Makefile.srcs diff --git a/fpga/usrp2/top/u2plus/u2plus_core.v b/fpga/usrp2/top/u2plus/u2plus_core.v index 3edb539f7..ec54de73e 100644 --- a/fpga/usrp2/top/u2plus/u2plus_core.v +++ b/fpga/usrp2/top/u2plus/u2plus_core.v @@ -131,20 +131,24 @@ module u2plus_core output spiflash_cs, output spiflash_clk, input spiflash_miso, output spiflash_mosi ); - localparam SR_BUF_POOL = 64; // router + localparam SR_MISC = 0; // Uses 9 regs + localparam SR_BUF_POOL = 64; // Uses 4 regs localparam SR_UDP_SM = 96; // 64 regs - localparam SR_RX_DSP = 160; // 16 - localparam SR_RX_CTRL = 176; // 16 + localparam SR_RX_DSP0 = 160; // 16 + localparam SR_RX_CTRL0 = 176; // 16 localparam SR_TIME64 = 192; // 3 localparam SR_SIMTIMER = 198; // 2 localparam SR_TX_DSP = 208; // 16 localparam SR_TX_CTRL = 224; // 16 - + localparam SR_RX_DSP1 = 240; + localparam SR_RX_CTRL1 = 32; + + // FIFO Sizes, 9 = 512 lines, 10 = 1024, 11 = 2048 // all (most?) are 36 bits wide, so 9 is 1 BRAM, 10 is 2, 11 is 4 BRAMs - localparam DSP_TX_FIFOSIZE = 10; + // localparam DSP_TX_FIFOSIZE = 9; unused -- DSPTX uses extram fifo localparam DSP_RX_FIFOSIZE = 10; - localparam ETH_TX_FIFOSIZE = 10; + localparam ETH_TX_FIFOSIZE = 9; localparam ETH_RX_FIFOSIZE = 11; localparam SERDES_TX_FIFOSIZE = 9; localparam SERDES_RX_FIFOSIZE = 9; // RX currently doesn't use a fifo? @@ -153,18 +157,19 @@ module u2plus_core wire [31:0] set_data, set_data_dsp; wire set_stb, set_stb_dsp; - reg wb_rst; wire dsp_rst; - + reg wb_rst; + wire dsp_rst = wb_rst; + wire [31:0] status; wire bus_error, spi_int, i2c_int, pps_int, onetime_int, periodic_int, buffer_int; - wire proc_int, overrun, underrun; + wire proc_int, overrun0, overrun1, underrun; wire [3:0] uart_tx_int, uart_rx_int; wire [31:0] debug_gpio_0, debug_gpio_1; wire [31:0] atr_lines; wire [31:0] debug_rx, debug_mac, debug_mac0, debug_mac1, debug_tx_dsp, debug_txc, - debug_serdes0, debug_serdes1, debug_serdes2, debug_rx_dsp, debug_udp; + debug_serdes0, debug_serdes1, debug_serdes2, debug_rx_dsp, debug_udp, debug_extfifo, debug_extfifo2; wire [15:0] ser_rx_occ, ser_tx_occ, dsp_rx_occ, dsp_tx_occ, eth_rx_occ, eth_tx_occ, eth_rx_occ2; wire ser_rx_full, ser_tx_full, dsp_rx_full, dsp_tx_full, eth_rx_full, eth_tx_full, eth_rx_full2; @@ -174,7 +179,9 @@ module u2plus_core wire epoch; wire [31:0] irq; wire [63:0] vita_time, vita_time_pps; - wire run_rx, run_tx; + + wire run_rx0, run_rx1, run_tx; + reg run_rx0_d1, run_rx1_d1; // /////////////////////////////////////////////////////////////////////////////////////////////// // Wishbone Single Master INTERCON @@ -341,15 +348,13 @@ module u2plus_core wire rd1_ready_i, rd1_ready_o; wire rd2_ready_i, rd2_ready_o; wire rd3_ready_i, rd3_ready_o; - wire [3:0] rd0_flags, rd1_flags, rd2_flags, rd3_flags; - wire [31:0] rd0_dat, rd1_dat, rd2_dat, rd3_dat; + wire [35:0] rd0_dat, rd1_dat, rd2_dat, rd3_dat; wire wr0_ready_i, wr0_ready_o; wire wr1_ready_i, wr1_ready_o; wire wr2_ready_i, wr2_ready_o; wire wr3_ready_i, wr3_ready_o; - wire [3:0] wr0_flags, wr1_flags, wr2_flags, wr3_flags; - wire [31:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat; + wire [35:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat; wire [35:0] tx_err_data; wire tx_err_src_rdy, tx_err_dst_rdy; @@ -367,14 +372,15 @@ module u2plus_core .status(status), .sys_int_o(buffer_int), .debug(router_debug), - .ser_inp_data({wr0_flags, wr0_dat}), .ser_inp_valid(wr0_ready_i), .ser_inp_ready(wr0_ready_o), - .dsp_inp_data({wr1_flags, wr1_dat}), .dsp_inp_valid(wr1_ready_i), .dsp_inp_ready(wr1_ready_o), - .eth_inp_data({wr2_flags, wr2_dat}), .eth_inp_valid(wr2_ready_i), .eth_inp_ready(wr2_ready_o), + .ser_inp_data(wr0_dat), .ser_inp_valid(wr0_ready_i), .ser_inp_ready(wr0_ready_o), + .dsp0_inp_data(wr1_dat), .dsp0_inp_valid(wr1_ready_i), .dsp0_inp_ready(wr1_ready_o), + .dsp1_inp_data(wr3_dat), .dsp1_inp_valid(wr3_ready_i), .dsp1_inp_ready(wr3_ready_o), + .eth_inp_data(wr2_dat), .eth_inp_valid(wr2_ready_i), .eth_inp_ready(wr2_ready_o), .err_inp_data(tx_err_data), .err_inp_ready(tx_err_dst_rdy), .err_inp_valid(tx_err_src_rdy), - .ser_out_data({rd0_flags, rd0_dat}), .ser_out_valid(rd0_ready_o), .ser_out_ready(rd0_ready_i), - .dsp_out_data({rd1_flags, rd1_dat}), .dsp_out_valid(rd1_ready_o), .dsp_out_ready(rd1_ready_i), - .eth_out_data({rd2_flags, rd2_dat}), .eth_out_valid(rd2_ready_o), .eth_out_ready(rd2_ready_i) + .ser_out_data(rd0_dat), .ser_out_valid(rd0_ready_o), .ser_out_ready(rd0_ready_i), + .dsp_out_data(rd1_dat), .dsp_out_valid(rd1_ready_o), .dsp_out_ready(rd1_ready_i), + .eth_out_data(rd2_dat), .eth_out_valid(rd2_ready_o), .eth_out_ready(rd2_ready_i) ); // ///////////////////////////////////////////////////////////////////////// @@ -410,12 +416,12 @@ module u2plus_core // Buffer Pool Status -- Slave #5 //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = 32'd4; + localparam compat_num = 32'd5; wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), .wb_adr_i(s5_adr), .wb_dat_o(s5_dat_i), .wb_ack_o(s5_ack), - + .word00(32'b0),.word01(32'b0),.word02(32'b0),.word03(32'b0), .word04(32'b0),.word05(32'b0),.word06(32'b0),.word07(32'b0), .word08(status),.word09({sim_mode,27'b0,clock_divider[3:0]}),.word10(vita_time[63:32]), @@ -426,56 +432,21 @@ module u2plus_core // ///////////////////////////////////////////////////////////////////////// // Ethernet MAC Slave #6 - wire [18:0] rx_f19_data, tx_f19_data; - wire rx_f19_src_rdy, rx_f19_dst_rdy, tx_f19_src_rdy, tx_f19_dst_rdy; - - simple_gemac_wrapper19 #(.RXFIFOSIZE(11), .TXFIFOSIZE(6)) simple_gemac_wrapper19 + simple_gemac_wrapper #(.RXFIFOSIZE(ETH_RX_FIFOSIZE), + .TXFIFOSIZE(ETH_TX_FIFOSIZE)) simple_gemac_wrapper19 (.clk125(clk_to_mac), .reset(wb_rst), .GMII_GTX_CLK(GMII_GTX_CLK), .GMII_TX_EN(GMII_TX_EN), .GMII_TX_ER(GMII_TX_ER), .GMII_TXD(GMII_TXD), .GMII_RX_CLK(GMII_RX_CLK), .GMII_RX_DV(GMII_RX_DV), .GMII_RX_ER(GMII_RX_ER), .GMII_RXD(GMII_RXD), .sys_clk(dsp_clk), - .rx_f19_data(rx_f19_data), .rx_f19_src_rdy(rx_f19_src_rdy), .rx_f19_dst_rdy(rx_f19_dst_rdy), - .tx_f19_data(tx_f19_data), .tx_f19_src_rdy(tx_f19_src_rdy), .tx_f19_dst_rdy(tx_f19_dst_rdy), + .rx_f36_data(wr2_dat), .rx_f36_src_rdy(wr2_ready_i), .rx_f36_dst_rdy(wr2_ready_o), + .tx_f36_data(rd2_dat), .tx_f36_src_rdy(rd2_ready_o), .tx_f36_dst_rdy(rd2_ready_i), .wb_clk(wb_clk), .wb_rst(wb_rst), .wb_stb(s6_stb), .wb_cyc(s6_cyc), .wb_ack(s6_ack), .wb_we(s6_we), .wb_adr(s6_adr), .wb_dat_i(s6_dat_o), .wb_dat_o(s6_dat_i), .mdio(MDIO), .mdc(MDC), .debug(debug_mac)); - wire [35:0] rx_f36_data, tx_f36_data; - wire rx_f36_src_rdy, rx_f36_dst_rdy, tx_f36_src_rdy, tx_f36_dst_rdy; - - wire [18:0] _rx_f19_data; - wire _rx_f19_src_rdy, _rx_f19_dst_rdy; - - //mac rx to eth input... - fifo19_rxrealign fifo19_rxrealign - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .datain(rx_f19_data), .src_rdy_i(rx_f19_src_rdy), .dst_rdy_o(rx_f19_dst_rdy), - .dataout(_rx_f19_data), .src_rdy_o(_rx_f19_src_rdy), .dst_rdy_i(_rx_f19_dst_rdy) ); - - fifo19_to_fifo36 eth_inp_fifo19_to_fifo36 - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .f19_datain(_rx_f19_data), .f19_src_rdy_i(_rx_f19_src_rdy), .f19_dst_rdy_o(_rx_f19_dst_rdy), - .f36_dataout(rx_f36_data), .f36_src_rdy_o(rx_f36_src_rdy), .f36_dst_rdy_i(rx_f36_dst_rdy) ); - - fifo_cascade #(.WIDTH(36), .SIZE(ETH_RX_FIFOSIZE)) rx_eth_fifo - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .datain(rx_f36_data), .src_rdy_i(rx_f36_src_rdy), .dst_rdy_o(rx_f36_dst_rdy), - .dataout({wr2_flags,wr2_dat}), .src_rdy_o(wr2_ready_i), .dst_rdy_i(wr2_ready_o)); - - //eth output to mac tx... - fifo_cascade #(.WIDTH(36), .SIZE(ETH_TX_FIFOSIZE)) tx_eth_fifo - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .datain({rd2_flags,rd2_dat}), .src_rdy_i(rd2_ready_o), .dst_rdy_o(rd2_ready_i), - .dataout(tx_f36_data), .src_rdy_o(tx_f36_src_rdy), .dst_rdy_i(tx_f36_dst_rdy)); - - fifo36_to_fifo19 eth_out_fifo36_to_fifo19 - (.clk(dsp_clk), .reset(dsp_rst), .clear(0), - .f36_datain(tx_f36_data), .f36_src_rdy_i(tx_f36_src_rdy), .f36_dst_rdy_o(tx_f36_dst_rdy), - .f19_dataout(tx_f19_data), .f19_src_rdy_o(tx_f19_src_rdy), .f19_dst_rdy_i(tx_f19_dst_rdy) ); - // ///////////////////////////////////////////////////////////////////////// // Settings Bus -- Slave #7 settings_bus settings_bus @@ -498,15 +469,15 @@ module u2plus_core wire phy_reset; assign PHY_RESETn = ~phy_reset; - setting_reg #(.my_addr(0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), .in(set_data),.out(clock_outs),.changed()); - setting_reg #(.my_addr(1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(serdes_outs),.changed()); - setting_reg #(.my_addr(2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(adc_outs),.changed()); - setting_reg #(.my_addr(4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(phy_reset),.changed()); - setting_reg #(.my_addr(5),.width(1)) sr_bldr (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+5),.width(1)) sr_bldr (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(bldr_done),.changed()); // ///////////////////////////////////////////////////////////////////////// @@ -516,12 +487,12 @@ module u2plus_core // In Rev3 there are only 6 leds, and the highest one is on the ETH connector wire [7:0] led_src, led_sw; - wire [7:0] led_hw = {run_tx, run_rx, clk_status, serdes_link_up, 1'b0}; + wire [7:0] led_hw = {run_tx, (run_rx0_d1 | run_rx1_d1), clk_status, serdes_link_up, 1'b0}; - setting_reg #(.my_addr(3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_sw),.changed()); - setting_reg #(.my_addr(8),.width(8), .at_reset(8'b0001_1110)) + setting_reg #(.my_addr(SR_MISC+8),.width(8), .at_reset(8'b0001_1110)) sr_led_src (.clk(wb_clk),.rst(wb_rst), .strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_src),.changed()); assign leds = (led_src & led_hw) | (~led_src & led_sw); @@ -533,7 +504,7 @@ module u2plus_core wire underrun_wb, overrun_wb, pps_wb; oneshot_2clk underrun_1s (.clk_in(dsp_clk), .in(underrun), .clk_out(wb_clk), .out(underrun_wb)); - oneshot_2clk overrun_1s (.clk_in(dsp_clk), .in(overrun), .clk_out(wb_clk), .out(overrun_wb)); + oneshot_2clk overrun_1s (.clk_in(dsp_clk), .in(overrun0 | overrun1), .clk_out(wb_clk), .out(overrun_wb)); oneshot_2clk pps_1s (.clk_in(dsp_clk), .in(pps_int), .clk_out(wb_clk), .out(pps_wb)); assign irq= {{8'b0}, @@ -572,15 +543,11 @@ module u2plus_core // ///////////////////////////////////////////////////////////////////////// // ATR Controller, Slave #11 - reg run_rx_d1; - always @(posedge dsp_clk) - run_rx_d1 <= run_rx; - atr_controller atr_controller (.clk_i(wb_clk),.rst_i(wb_rst), .adr_i(sb_adr[5:0]),.sel_i(sb_sel),.dat_i(sb_dat_o),.dat_o(sb_dat_i), .we_i(sb_we),.stb_i(sb_stb),.cyc_i(sb_cyc),.ack_o(sb_ack), - .run_rx(run_rx_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) ); + .run_rx(run_rx0_d1 | run_rx1_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) ); // ////////////////////////////////////////////////////////////////////////// // Time Sync, Slave #12 @@ -605,50 +572,60 @@ module u2plus_core .sclk_pad_o(spiflash_clk),.mosi_pad_o(spiflash_mosi),.miso_pad_i(spiflash_miso) ); // ///////////////////////////////////////////////////////////////////////// - // DSP RX - wire [31:0] sample_rx, sample_tx; - wire strobe_rx, strobe_tx; - wire rx_dst_rdy, rx_src_rdy, rx1_dst_rdy, rx1_src_rdy; - wire [99:0] rx_data; - wire [35:0] rx1_data; - - dsp_core_rx #(.BASE(SR_RX_DSP)) dsp_core_rx + // DSP RX 0 + wire [31:0] sample_rx0; + wire clear_rx0, strobe_rx0; + + always @(posedge dsp_clk) + run_rx0_d1 <= run_rx0; + + dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b), - .sample(sample_rx), .run(run_rx_d1), .strobe(strobe_rx), - .debug(debug_rx_dsp) ); + .sample(sample_rx0), .run(run_rx0_d1), .strobe(strobe_rx0), + .debug() ); - wire [31:0] vrc_debug; - wire clear_rx; - - setting_reg #(.my_addr(SR_RX_CTRL+3)) sr_clear + setting_reg #(.my_addr(SR_RX_CTRL0+3)) sr_clear_rx0 (.clk(dsp_clk),.rst(dsp_rst), .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), - .out(),.changed(clear_rx)); + .out(),.changed(clear_rx0)); - vita_rx_control #(.BASE(SR_RX_CTRL), .WIDTH(32)) vita_rx_control - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx), + vita_rx_chain #(.BASE(SR_RX_CTRL0),.UNIT(0),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain0 + (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx0), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .vita_time(vita_time), .overrun(overrun), - .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), - .sample_fifo_o(rx_data), .sample_fifo_dst_rdy_i(rx_dst_rdy), .sample_fifo_src_rdy_o(rx_src_rdy), - .debug_rx(vrc_debug)); + .vita_time(vita_time), .overrun(overrun0), + .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), + .rx_data_o(wr1_dat), .rx_src_rdy_o(wr1_ready_i), .rx_dst_rdy_i(wr1_ready_o), + .debug() ); - wire [3:0] vita_state; + // ///////////////////////////////////////////////////////////////////////// + // DSP RX 1 + wire [31:0] sample_rx1; + wire clear_rx1, strobe_rx1; + + always @(posedge dsp_clk) + run_rx1_d1 <= run_rx1; - vita_rx_framer #(.BASE(SR_RX_CTRL), .MAXCHAN(1)) vita_rx_framer - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx), + dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 + (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .sample_fifo_i(rx_data), .sample_fifo_dst_rdy_o(rx_dst_rdy), .sample_fifo_src_rdy_i(rx_src_rdy), - .data_o(rx1_data), .dst_rdy_i(rx1_dst_rdy), .src_rdy_o(rx1_src_rdy), - .fifo_occupied(), .fifo_full(), .fifo_empty(), - .debug_rx(vita_state) ); + .adc_a(adc_a),.adc_ovf_a(adc_ovf_a),.adc_b(adc_b),.adc_ovf_b(adc_ovf_b), + .sample(sample_rx1), .run(run_rx1_d1), .strobe(strobe_rx1), + .debug() ); - fifo_cascade #(.WIDTH(36), .SIZE(DSP_RX_FIFOSIZE)) rx_fifo_cascade - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx), - .datain(rx1_data), .src_rdy_i(rx1_src_rdy), .dst_rdy_o(rx1_dst_rdy), - .dataout({wr1_flags,wr1_dat}), .src_rdy_o(wr1_ready_i), .dst_rdy_i(wr1_ready_o)); + setting_reg #(.my_addr(SR_RX_CTRL1+3)) sr_clear_rx1 + (.clk(dsp_clk),.rst(dsp_rst), + .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), + .out(),.changed(clear_rx1)); + + vita_rx_chain #(.BASE(SR_RX_CTRL1),.UNIT(2),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain1 + (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx1), + .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .vita_time(vita_time), .overrun(overrun1), + .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), + .rx_data_o(wr3_dat), .rx_src_rdy_o(wr3_ready_i), .rx_dst_rdy_i(wr3_ready_o), + .debug() ); // /////////////////////////////////////////////////////////////////////////////////// // DSP TX @@ -678,10 +655,10 @@ module u2plus_core .RAM_LDn(RAM_LDn), .RAM_OEn(RAM_OEn), .RAM_CE1n(RAM_CE1n), - .datain({rd1_flags[3:2],rd1_dat[31:16],rd1_flags[1:0],rd1_dat[15:0]}), + .datain(rd1_dat), .src_rdy_i(rd1_ready_o), .dst_rdy_o(rd1_ready_i), - .dataout({tx_data[35:34],tx_data[31:16],tx_data[33:32],tx_data[15:0]}), + .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy), .debug(debug_extfifo), @@ -701,17 +678,15 @@ module u2plus_core .underrun(underrun), .run(run_tx), .debug(debug_vt)); - assign dsp_rst = wb_rst; - // /////////////////////////////////////////////////////////////////////////////////// // SERDES serdes #(.TXFIFOSIZE(SERDES_TX_FIFOSIZE),.RXFIFOSIZE(SERDES_RX_FIFOSIZE)) serdes (.clk(dsp_clk),.rst(dsp_rst), .ser_tx_clk(ser_tx_clk),.ser_t(ser_t),.ser_tklsb(ser_tklsb),.ser_tkmsb(ser_tkmsb), - .rd_dat_i(rd0_dat),.rd_flags_i(rd0_flags),.rd_ready_o(rd0_ready_i),.rd_ready_i(rd0_ready_o), + .rd_dat_i(rd0_dat[31:0]),.rd_flags_i(rd0_dat[35:32]),.rd_ready_o(rd0_ready_i),.rd_ready_i(rd0_ready_o), .ser_rx_clk(ser_rx_clk),.ser_r(ser_r),.ser_rklsb(ser_rklsb),.ser_rkmsb(ser_rkmsb), - .wr_dat_o(wr0_dat),.wr_flags_o(wr0_flags),.wr_ready_o(wr0_ready_i),.wr_ready_i(wr0_ready_o), + .wr_dat_o(wr0_dat[31:0]),.wr_flags_o(wr0_dat[35:32]),.wr_ready_o(wr0_ready_i),.wr_ready_i(wr0_ready_o), .tx_occupied(ser_tx_occ),.tx_full(ser_tx_full),.tx_empty(ser_tx_empty), .rx_occupied(ser_rx_occ),.rx_full(ser_rx_full),.rx_empty(ser_rx_empty), .serdes_link_up(serdes_link_up),.debug0(debug_serdes0), .debug1(debug_serdes1) ); @@ -720,18 +695,18 @@ module u2plus_core // VITA Timing wire [31:0] debug_sync; - + time_64bit #(.TICKS_PER_SEC(32'd100000000),.BASE(SR_TIME64)) time_64bit (.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb_dsp), .set_addr(set_addr_dsp), .set_data(set_data_dsp), .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), .exp_time_in(exp_time_in), .exp_time_out(exp_time_out), .debug(debug_sync)); - + // ///////////////////////////////////////////////////////////////////////////////////////// // Debug Pins assign debug_clk = 2'b00; // {dsp_clk, clk_to_mac}; - assign debug = 32'd0; // debug_extfifo; + assign debug = 32'd0; assign debug_gpio_0 = 32'd0; assign debug_gpio_1 = 32'd0; diff --git a/fpga/usrp2/vrt/Makefile.srcs b/fpga/usrp2/vrt/Makefile.srcs index aa1356d82..4851bc924 100644 --- a/fpga/usrp2/vrt/Makefile.srcs +++ b/fpga/usrp2/vrt/Makefile.srcs @@ -8,6 +8,7 @@ VRT_SRCS = $(abspath $(addprefix $(BASE_DIR)/../vrt/, \ vita_rx_control.v \ vita_rx_framer.v \ +vita_rx_chain.v \ vita_tx_control.v \ vita_tx_deframer.v \ vita_tx_chain.v \ diff --git a/fpga/usrp2/vrt/vita_rx_chain.v b/fpga/usrp2/vrt/vita_rx_chain.v new file mode 100644 index 000000000..d7498286d --- /dev/null +++ b/fpga/usrp2/vrt/vita_rx_chain.v @@ -0,0 +1,42 @@ + +module vita_rx_chain + #(parameter BASE=0, + parameter UNIT=0, + parameter FIFOSIZE=10) + (input clk, input reset, input clear, + input set_stb, input [7:0] set_addr, input [31:0] set_data, + input [63:0] vita_time, output overrun, + input [31:0] sample, output run, input strobe, + output [35:0] rx_data_o, output rx_src_rdy_o, input rx_dst_rdy_i, + output [31:0] debug ); + + wire [100:0] sample_data; + wire sample_dst_rdy, sample_src_rdy; + wire [31:0] vrc_debug, vrf_debug; + + wire [35:0] rx_data_int; + wire rx_src_rdy_int, rx_dst_rdy_in; + + vita_rx_control #(.BASE(BASE), .WIDTH(32)) vita_rx_control + (.clk(clk), .reset(reset), .clear(clear), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .vita_time(vita_time), .overrun(overrun), + .sample(sample), .run(run), .strobe(strobe), + .sample_fifo_o(sample_data), .sample_fifo_dst_rdy_i(sample_dst_rdy), .sample_fifo_src_rdy_o(sample_src_rdy), + .debug_rx(vrc_debug)); + + vita_rx_framer #(.BASE(BASE), .MAXCHAN(1)) vita_rx_framer + (.clk(clk), .reset(reset), .clear(clear), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .sample_fifo_i(sample_data), .sample_fifo_dst_rdy_o(sample_dst_rdy), .sample_fifo_src_rdy_i(sample_src_rdy), + .data_o(rx_data_int), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int), + .debug_rx(vrf_debug) ); + + dsp_framer36 #(.BUF_SIZE(FIFOSIZE), .PORT_SEL(UNIT)) dsp0_framer36 + (.clk(clk), .reset(reset), .clear(clear), + .data_i(rx_data_int), .src_rdy_i(rx_src_rdy_int), .dst_rdy_o(rx_dst_rdy_int), + .data_o(rx_data_o), .src_rdy_o(rx_src_rdy_o), .dst_rdy_i(rx_dst_rdy_i) ); + + assign debug = vrc_debug; // | vrf_debug; + +endmodule // vita_rx_chain diff --git a/fpga/usrp2/vrt/vita_rx_control.v b/fpga/usrp2/vrt/vita_rx_control.v index 0769f3a24..4c0cef50d 100644 --- a/fpga/usrp2/vrt/vita_rx_control.v +++ b/fpga/usrp2/vrt/vita_rx_control.v @@ -196,4 +196,4 @@ module vita_rx_control { go_now, too_late, run, strobe, read_ctrl, write_ctrl, 1'b0, ~not_empty_ctrl }, { 2'b0, overrun, chain_pre, sample_fifo_in_rdy, attempt_sample_write, sample_fifo_src_rdy_o,sample_fifo_dst_rdy_i} }; -endmodule // rx_control +endmodule // vita_rx_control diff --git a/fpga/usrp2/vrt/vita_rx_framer.v b/fpga/usrp2/vrt/vita_rx_framer.v index bce8fe334..04b636778 100644 --- a/fpga/usrp2/vrt/vita_rx_framer.v +++ b/fpga/usrp2/vrt/vita_rx_framer.v @@ -15,11 +15,6 @@ module vita_rx_framer input sample_fifo_src_rdy_i, output sample_fifo_dst_rdy_o, - // FIFO Levels - output [15:0] fifo_occupied, - output fifo_full, - output fifo_empty, - output [31:0] debug_rx ); @@ -200,8 +195,8 @@ module vita_rx_framer (.clk(clk), .reset(reset), .clear(clear), .datain(pkt_fifo_line), .src_rdy_i(req_write_pkt_fifo), .dst_rdy_o(pkt_fifo_rdy), .dataout(data_o[33:0]), .src_rdy_o(src_rdy_o), .dst_rdy_i(dst_rdy_i), - .space(),.occupied(fifo_occupied[4:0]) ); - assign fifo_occupied[15:5] = 0; + .space(),.occupied() ); + assign data_o[35:34] = 2'b00; // Always write full lines assign sample_fifo_dst_rdy_o = pkt_fifo_rdy & ( ((vita_state==VITA_PAYLOAD) & @@ -211,4 +206,4 @@ module vita_rx_framer assign debug_rx = vita_state; -endmodule // rx_control +endmodule // vita_rx_framer diff --git a/host/CMakeLists.txt b/host/CMakeLists.txt index e4f272a76..bbcf34373 100644 --- a/host/CMakeLists.txt +++ b/host/CMakeLists.txt @@ -61,10 +61,7 @@ IF(NOT CMAKE_BUILD_TYPE) SET(CMAKE_BUILD_TYPE "Release") MESSAGE(STATUS "Build type not specified: defaulting to release.") ENDIF(NOT CMAKE_BUILD_TYPE) - -#Creating a shared pointer itself has allocation overhead. -#Define the quick allocator to reduce fast-path overhead. -ADD_DEFINITIONS(-DBOOST_SP_USE_QUICK_ALLOCATOR) +SET(CMAKE_BUILD_TYPE "${CMAKE_BUILD_TYPE}" CACHE STRING "") IF(CMAKE_COMPILER_IS_GNUCXX) ADD_DEFINITIONS(-Wall) diff --git a/host/Modules/UHDPython.cmake b/host/Modules/UHDPython.cmake index cad549ea4..345e0187d 100644 --- a/host/Modules/UHDPython.cmake +++ b/host/Modules/UHDPython.cmake @@ -31,7 +31,7 @@ ELSE(PYTHON_EXECUTABLE) #and if that fails use the find program routine IF(NOT PYTHONINTERP_FOUND) - FIND_PROGRAM(PYTHON_EXECUTABLE python) + FIND_PROGRAM(PYTHON_EXECUTABLE NAMES python python2.7 python2.6) IF(PYTHON_EXECUTABLE) SET(PYTHONINTERP_FOUND TRUE) ENDIF(PYTHON_EXECUTABLE) diff --git a/host/apps/omap_debug/fetch-bin.sh b/host/apps/omap_debug/fetch-bin.sh deleted file mode 100755 index 019ddaaf2..000000000 --- a/host/apps/omap_debug/fetch-bin.sh +++ /dev/null @@ -1,6 +0,0 @@ -if [ $GHQ ]; then - scp $GHQ_USER@astro:/workspace/usrp1-e-dev/u1e.bin /home/root -else - scp -P 8822 balister@192.168.1.10:src/git/fpgapriv/usrp2/top/u1e/build/u1e.bin /home/root -fi -sync diff --git a/host/apps/omap_debug/fetch-kernel.sh b/host/apps/omap_debug/fetch-kernel.sh deleted file mode 100755 index ce420f3d2..000000000 --- a/host/apps/omap_debug/fetch-kernel.sh +++ /dev/null @@ -1,7 +0,0 @@ -if [ $GHQ ]; then - scp $GHQ_USER@astro:/workspace/usrp1-e-dev/kernel_usrp/arch/arm/boot/uImage /media/mmcblk0p1/uImage -else - scp balister@192.168.1.10:src/git/kernel_usrp/arch/arm/boot/uImage /media/mmcblk0p1/uImage -fi -sync - diff --git a/host/apps/omap_debug/fetch-module.sh b/host/apps/omap_debug/fetch-module.sh deleted file mode 100755 index ec28989bd..000000000 --- a/host/apps/omap_debug/fetch-module.sh +++ /dev/null @@ -1,6 +0,0 @@ -if [ $GHQ ]; then - scp $GHQ_USER@astro:/workspace/usrp1-e-dev/kernel_usrp/drivers/misc/usrp_e.ko /lib/modules/2.6.33/kernel/drivers/misc -else - scp balister@192.168.1.10:src/git/kernel_usrp/drivers/misc/usrp_e.ko /lib/modules/2.6.33/kernel/drivers/misc -fi -sync diff --git a/host/apps/omap_debug/fetch-u-boot.sh b/host/apps/omap_debug/fetch-u-boot.sh deleted file mode 100755 index 5309364b8..000000000 --- a/host/apps/omap_debug/fetch-u-boot.sh +++ /dev/null @@ -1,7 +0,0 @@ -if [ $GHQ ]; then - scp $GHQ_USER@astro:/workspace/usrp1-e-dev/u-boot-overo/u-boot.bin /media/mmcblk0p1/ -else - scp balister@192.168.1.167:src/git/u-boot/u-boot.bin /media/mmcblk0p1/ -fi -sync - diff --git a/host/apps/omap_debug/read_board_id.sh b/host/apps/omap_debug/read_board_id.sh deleted file mode 100755 index 96081f219..000000000 --- a/host/apps/omap_debug/read_board_id.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -i2cget -y 3 0x51 0x00 b -i2cget -y 3 0x51 0x01 b -i2cget -y 3 0x51 0x02 b -i2cget -y 3 0x51 0x03 b -i2cget -y 3 0x51 0x04 b -i2cget -y 3 0x51 0x05 b - - diff --git a/host/apps/omap_debug/reload-fpga.sh b/host/apps/omap_debug/reload-fpga.sh deleted file mode 100755 index 2754718a4..000000000 --- a/host/apps/omap_debug/reload-fpga.sh +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -rmmod usrp_e -fpga-downloader /home/root/u1e.bin -modprobe usrp_e -usrp-e-debug-pins 1 - diff --git a/host/apps/omap_debug/setup-board-id-eeprom.sh b/host/apps/omap_debug/setup-board-id-eeprom.sh deleted file mode 100755 index 4dba1cce5..000000000 --- a/host/apps/omap_debug/setup-board-id-eeprom.sh +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -i2cset -y 3 0x51 0x00 0x00 -i2cset -y 3 0x51 0x01 0x03 -i2cset -y 3 0x51 0x02 0x00 -i2cset -y 3 0x51 0x03 0x01 -i2cset -y 3 0x51 0x04 0x01 -i2cset -y 3 0x51 0x05 0x00 -i2cset -y 3 0x51 0x06 0x00 - -i2cget -y 3 0x51 0 b -i2cget -y 3 0x51 1 b -i2cget -y 3 0x51 2 b -i2cget -y 3 0x51 3 b -i2cget -y 3 0x51 4 b -i2cget -y 3 0x51 5 b -i2cget -y 3 0x51 6 b diff --git a/host/apps/omap_debug/write-eeprom.sh b/host/apps/omap_debug/write-eeprom.sh deleted file mode 100755 index 301b06f07..000000000 --- a/host/apps/omap_debug/write-eeprom.sh +++ /dev/null @@ -1,92 +0,0 @@ -#!/bin/bash - -if [ $# -ne 3 ] && [ $# -ne 5 ]; -then - echo "Usage:" - echo "" - echo "writeprom.sh deviceid rev fab_rev [envvar envsetting]" - echo - echo " deviceid - expansion board device number from table:" - echo - echo " Summit 0x01" - echo " Tobi 0x02" - echo " Tobi Duo 0x03" - echo " Palo35 0x04" - echo " Palo43 0x05" - echo " Chestnut43 0x06" - echo " Pinto 0x07" - echo - echo " rev - board revision (e.g. 0x00)" - echo " fab_rev - revision marking from pcb (e.g. R2411)" - echo " envvar - optional u-boot env variable name" - echo " (e.g. dvimode)" - echo " envsetting - optional u-boot env variable setting" - echo " (e.g. 1024x768MR-16@60)" - exit 1 -fi - -fabrevision=$3 -if [ ${#fabrevision} -ge 8 ]; then - echo "Error: fab revision string must less than 8 characters" - exit 1 -fi - -envvar=$4 -if [ ${#envar} -ge 16 ]; then - echo "Error: environment variable name string must less than 16 characters" - exit 1 -fi - -envsetting=$5 -if [ ${#ensetting} -ge 64 ]; then - echo "Error: environment setting string must less than 64 characters" - exit 1 -fi - -bus=3 -device=0x51 -vendorid=0x03 - -i2cset -y $bus $device 0x00 0x00 -i2cset -y $bus $device 0x01 $vendorid -i2cset -y $bus $device 0x02 0x00 -i2cset -y $bus $device 0x03 $1 -i2cset -y $bus $device 0x04 $2 -i2cset -y $bus $device 0x05 00 - -let i=6 -hexdumpargs="'${#fabrevision}/1 \"0x%02x \"'" -command="echo -n \"$fabrevision\" | hexdump -e $hexdumpargs" -hex=$(eval $command) -for character in $hex; do - i2cset -y $bus $device $i $character - let i=$i+1 -done -i2cset -y $bus $device $i 0x00 - -if [ $# -eq 5 ] -then - i2cset -y $bus $device 0x05 0x01 - - let i=14 - hexdumpargs="'${#envvar}/1 \"0x%02x \"'" - command="echo -n \"$envvar\" | hexdump -e $hexdumpargs" - hex=$(eval $command) - for character in $hex; do - i2cset -y $bus $device $i $character - let i=$i+1 - done - i2cset -y $bus $device $i 0x00 - - let i=30 - hexdumpargs="'${#envsetting}/1 \"0x%02x \"'" - command="echo -n \"$envsetting\" | hexdump -e $hexdumpargs" - hex=$(eval $command) - for character in $hex; do - i2cset -y $bus $device $i $character - let i=$i+1 - done - i2cset -y $bus $device $i 0x00 -fi - - diff --git a/host/apps/omap_debug/write_board_id.sh b/host/apps/omap_debug/write_board_id.sh deleted file mode 100755 index 067269c64..000000000 --- a/host/apps/omap_debug/write_board_id.sh +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -i2cset -y 3 0x51 0x00 0x00 -i2cset -y 3 0x51 0x01 0x03 -i2cset -y 3 0x51 0x02 0x00 -i2cset -y 3 0x51 0x03 0x01 -i2cset -y 3 0x51 0x04 0x00 -i2cset -y 3 0x51 0x05 0x00 - - diff --git a/host/include/uhd/CMakeLists.txt b/host/include/uhd/CMakeLists.txt index b7a22cf0b..db755511e 100644 --- a/host/include/uhd/CMakeLists.txt +++ b/host/include/uhd/CMakeLists.txt @@ -25,6 +25,7 @@ INSTALL(FILES config.hpp convert.hpp device.hpp + exception.hpp version.hpp wax.hpp DESTINATION ${INCLUDE_DIR}/uhd diff --git a/host/include/uhd/exception.hpp b/host/include/uhd/exception.hpp new file mode 100644 index 000000000..e2a50bf1e --- /dev/null +++ b/host/include/uhd/exception.hpp @@ -0,0 +1,133 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_EXCEPTION_HPP +#define INCLUDED_UHD_UTILS_EXCEPTION_HPP + +#include <uhd/config.hpp> +#include <boost/current_function.hpp> +#include <stdexcept> +#include <string> + +/*! + * Define common exceptions used throughout the code: + * + * - The python built-in exceptions were used as inspiration. + * - Exceptions inherit from std::exception to provide what(). + * - Exceptions inherit from uhd::exception to provide code(). + * + * The code() provides an error code which allows the application + * the option of printing a cryptic error message from the 1990s. + */ +namespace uhd{ + + struct UHD_API exception : std::runtime_error{ + exception(const std::string &what); + virtual unsigned code(void) const = 0; + }; + + struct UHD_API assertion_error : exception{ + assertion_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API lookup_error : exception{ + lookup_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API index_error : lookup_error{ + index_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API key_error : lookup_error{ + key_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API type_error : exception{ + type_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API value_error : exception{ + value_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API runtime_error : exception{ + runtime_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API not_implemented_error : runtime_error{ + not_implemented_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API environment_error : exception{ + environment_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API io_error : environment_error{ + io_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API os_error : environment_error{ + os_error(const std::string &what); + virtual unsigned code(void) const; + }; + + struct UHD_API system_error : exception{ + system_error(const std::string &what); + virtual unsigned code(void) const; + }; + + /*! + * Create a formated string with throw-site information. + * Fills in the function name, file name, and line number. + * \param what the std::exeption message + * \return the formatted exception message + */ + #define UHD_THROW_SITE_INFO(what) std::string( \ + std::string(what) + "\n" + \ + " in " + std::string(BOOST_CURRENT_FUNCTION) + "\n" + \ + " at " + std::string(__FILE__) + ":" + BOOST_STRINGIZE(__LINE__) + "\n" \ + ) + + /*! + * Throws an invalid code path exception with throw-site information. + * Use this macro in places that code execution is not supposed to go. + */ + #define UHD_THROW_INVALID_CODE_PATH() \ + throw uhd::system_error(UHD_THROW_SITE_INFO("invalid code path")) + + /*! + * Assert the result of the code evaluation. + * If the code evaluates to false, throw an assertion error. + * \param code the code that resolved to a boolean + */ + #define UHD_ASSERT_THROW(code) if (not (code)) \ + throw uhd::assertion_error(UHD_THROW_SITE_INFO(#code)); \ + else void(0) + +} //namespace uhd + +#endif /* INCLUDED_UHD_UTILS_EXCEPTION_HPP */ diff --git a/host/include/uhd/types/device_addr.hpp b/host/include/uhd/types/device_addr.hpp index eb3394230..2c0841146 100644 --- a/host/include/uhd/types/device_addr.hpp +++ b/host/include/uhd/types/device_addr.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -84,9 +84,15 @@ namespace uhd{ } }; - //handy typedef for a vector of device addresses + //! A typedef for a vector of device addresses typedef std::vector<device_addr_t> device_addrs_t; + //! Separate an indexed device address into a vector of device addresses + UHD_API device_addrs_t separate_device_addr(const device_addr_t &dev_addr); + + //! Combine a vector of device addresses into an indexed device address + UHD_API device_addr_t combine_device_addrs(const device_addrs_t &dev_addrs); + } //namespace uhd #endif /* INCLUDED_UHD_TYPES_DEVICE_ADDR_HPP */ diff --git a/host/include/uhd/types/dict.ipp b/host/include/uhd/types/dict.ipp index 0c014474e..5e9cf97ad 100644 --- a/host/include/uhd/types/dict.ipp +++ b/host/include/uhd/types/dict.ipp @@ -18,18 +18,18 @@ #ifndef INCLUDED_UHD_TYPES_DICT_IPP #define INCLUDED_UHD_TYPES_DICT_IPP +#include <uhd/exception.hpp> #include <boost/foreach.hpp> #include <boost/format.hpp> #include <boost/lexical_cast.hpp> -#include <stdexcept> #include <typeinfo> namespace uhd{ namespace /*anon*/{ template<typename Key, typename Val> - struct key_not_found: std::out_of_range{ - key_not_found(const Key &key): std::out_of_range( + struct key_not_found: uhd::key_error{ + key_not_found(const Key &key): uhd::key_error( str(boost::format( "key \"%s\" not found in dict(%s, %s)" ) % boost::lexical_cast<std::string>(key) diff --git a/host/include/uhd/types/serial.hpp b/host/include/uhd/types/serial.hpp index c134725f5..5c6de162b 100644 --- a/host/include/uhd/types/serial.hpp +++ b/host/include/uhd/types/serial.hpp @@ -116,6 +116,59 @@ namespace uhd{ */ spi_config_t(edge_t edge = EDGE_RISE); }; + + /*! + * The SPI interface class. + * Provides routines to transact SPI and do other useful things which haven't been defined yet. + */ + class UHD_API spi_iface{ + public: + /*! + * Perform a spi transaction. + * \param which_slave the slave device number + * \param config spi config args + * \param data the bits to write + * \param num_bits how many bits in data + * \param readback true to readback a value + * \return spi data if readback set + */ + virtual boost::uint32_t transact_spi( + int which_slave, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits, + bool readback + ) = 0; + + /*! + * Read from the SPI bus. + * \param which_slave the slave device number + * \param config spi config args + * \param data the bits to write out (be sure to set write bit) + * \param num_bits how many bits in data + * \return spi data + */ + virtual boost::uint32_t read_spi( + int which_slave, + const spi_config_t &config, + boost::uint16_t data, + size_t num_bits + ); + + /*! + * Write to the SPI bus. + * \param which_slave the slave device number + * \param config spi config args + * \param data the bits to write + * \param num_bits how many bits in data + */ + virtual void write_spi( + int which_slave, + const spi_config_t &config, + boost::uint16_t data, + size_t num_bits + ); + }; } //namespace uhd diff --git a/host/include/uhd/usrp/CMakeLists.txt b/host/include/uhd/usrp/CMakeLists.txt index f60b35e59..59a1302af 100644 --- a/host/include/uhd/usrp/CMakeLists.txt +++ b/host/include/uhd/usrp/CMakeLists.txt @@ -43,6 +43,7 @@ INSTALL(FILES ### interfaces ### single_usrp.hpp multi_usrp.hpp + mboard_iface.hpp DESTINATION ${INCLUDE_DIR}/uhd/usrp ) diff --git a/host/include/uhd/usrp/dsp_props.hpp b/host/include/uhd/usrp/dsp_props.hpp index 3e1690317..e68e11deb 100644 --- a/host/include/uhd/usrp/dsp_props.hpp +++ b/host/include/uhd/usrp/dsp_props.hpp @@ -39,8 +39,8 @@ namespace uhd{ namespace usrp{ enum dsp_prop_t{ DSP_PROP_NAME, //ro, std::string DSP_PROP_OTHERS, //ro, prop_names_t + DSP_PROP_STREAM_CMD, //wo, stream_cmd_t DSP_PROP_FREQ_SHIFT, //rw, double Hz - DSP_PROP_FREQ_SHIFT_NAMES, //ro, prop_names_t DSP_PROP_CODEC_RATE, //ro, double Sps DSP_PROP_HOST_RATE //rw, double Sps }; diff --git a/host/include/uhd/usrp/mboard_iface.hpp b/host/include/uhd/usrp/mboard_iface.hpp new file mode 100644 index 000000000..784fbc7c5 --- /dev/null +++ b/host/include/uhd/usrp/mboard_iface.hpp @@ -0,0 +1,85 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_USRP_MBOARD_IFACE_HPP +#define INCLUDED_UHD_USRP_MBOARD_IFACE_HPP + +#include <uhd/types/serial.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <boost/cstdint.hpp> +#include <utility> +#include <string> + +namespace uhd{ namespace usrp{ + +/*! + * The mboard interface class: + * Provides a set of functions to implementation layer. + * Including spi, peek, poke, control... + */ +class mboard_iface : public uhd::i2c_iface, public uhd::spi_iface { +public: + typedef boost::shared_ptr<mboard_iface> sptr; + /*! + * Write a register (32 bits) + * \param addr the address + * \param data the 32bit data + */ + virtual void poke32(boost::uint32_t addr, boost::uint32_t data) = 0; + + /*! + * Read a register (32 bits) + * \param addr the address + * \return the 32bit data + */ + virtual boost::uint32_t peek32(boost::uint32_t addr) = 0; + + /*! + * Write a register (16 bits) + * \param addr the address + * \param data the 16bit data + */ + virtual void poke16(boost::uint32_t addr, boost::uint16_t data) = 0; + + /*! + * Read a register (16 bits) + * \param addr the address + * \return the 16bit data + */ + virtual boost::uint16_t peek16(boost::uint32_t addr) = 0; + + /*! + * Write to a serial port. + * \param dev which UART to write to + * \param buf the data to write + */ + virtual void write_uart(boost::uint8_t dev, const std::string &buf) = 0; + + /*! + * Read from a serial port. + * \param dev which UART to read from + * \return the data read from the serial port + */ + virtual std::string read_uart(boost::uint8_t dev) = 0; + +}; + +}} + +#endif //INCLUDED_UHD_USRP_DBOARD_IFACE_HPP diff --git a/host/include/uhd/usrp/mboard_props.hpp b/host/include/uhd/usrp/mboard_props.hpp index 8855e2b75..a2580954e 100644 --- a/host/include/uhd/usrp/mboard_props.hpp +++ b/host/include/uhd/usrp/mboard_props.hpp @@ -47,8 +47,8 @@ namespace uhd{ namespace usrp{ MBOARD_PROP_CLOCK_CONFIG, //rw, clock_config_t MBOARD_PROP_TIME_NOW, //rw, time_spec_t MBOARD_PROP_TIME_PPS, //wo, time_spec_t - MBOARD_PROP_STREAM_CMD, //wo, stream_cmd_t - MBOARD_PROP_EEPROM_MAP //wr, mboard_eeprom_t + MBOARD_PROP_EEPROM_MAP, //wr, mboard_eeprom_t + MBOARD_PROP_IFACE, //ro, mboard_iface::sptr }; }} //namespace diff --git a/host/include/uhd/usrp/multi_usrp.hpp b/host/include/uhd/usrp/multi_usrp.hpp index 3c8dd5fac..b161d1278 100644 --- a/host/include/uhd/usrp/multi_usrp.hpp +++ b/host/include/uhd/usrp/multi_usrp.hpp @@ -28,6 +28,7 @@ #include <uhd/types/sensors.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <uhd/usrp/dboard_iface.hpp> +#include <uhd/usrp/mboard_iface.hpp> #include <boost/shared_ptr.hpp> #include <boost/utility.hpp> #include <vector> @@ -87,6 +88,9 @@ public: //! A wildcard motherboard index static const size_t ALL_MBOARDS = size_t(~0); + //! A wildcard channel index + static const size_t ALL_CHANS = size_t(~0); + //! A wildcard gain element name static const std::string ALL_GAINS; @@ -215,8 +219,9 @@ public: * to ensure that the packets can be aligned by their time specs. * * \param stream_cmd the stream command to issue + * \param chan the channel index 0 to N-1 */ - virtual void issue_stream_cmd(const stream_cmd_t &stream_cmd) = 0; + virtual void issue_stream_cmd(const stream_cmd_t &stream_cmd, size_t chan = ALL_CHANS) = 0; /*! * Set the clock configuration for the usrp device. @@ -246,6 +251,12 @@ public: * \return a vector of sensor names */ virtual std::vector<std::string> get_mboard_sensor_names(size_t mboard = 0) = 0; + + /*! + * Get a handle to the mboard_iface object which controls peripheral access. + * \return a mboard_iface::sptr object + */ + virtual mboard_iface::sptr get_mboard_iface(size_t mboard) = 0; /******************************************************************* * RX methods @@ -282,16 +293,18 @@ public: virtual std::string get_rx_subdev_name(size_t chan = 0) = 0; /*! - * Set the RX sample rate across all channels. + * Set the RX sample rate. * \param rate the rate in Sps + * \param chan the channel index 0 to N-1 */ - virtual void set_rx_rate(double rate) = 0; + virtual void set_rx_rate(double rate, size_t chan = ALL_CHANS) = 0; /*! - * Gets the RX sample rate for all channels. + * Gets the RX sample rate. + * \param chan the channel index 0 to N-1 * \return the rate in Sps */ - virtual double get_rx_rate(void) = 0; + virtual double get_rx_rate(size_t chan = 0) = 0; /*! * Set the RX center frequency. @@ -480,16 +493,18 @@ public: virtual std::string get_tx_subdev_name(size_t chan = 0) = 0; /*! - * Set the TX sample rate across all channels. + * Set the TX sample rate. * \param rate the rate in Sps + * \param chan the channel index 0 to N-1 */ - virtual void set_tx_rate(double rate) = 0; + virtual void set_tx_rate(double rate, size_t chan = ALL_CHANS) = 0; /*! - * Gets the TX sample rate for all channels. + * Gets the TX sample rate. + * \param chan the channel index 0 to N-1 * \return the rate in Sps */ - virtual double get_tx_rate(void) = 0; + virtual double get_tx_rate(size_t chan = 0) = 0; /*! * Set the TX center frequency. diff --git a/host/include/uhd/usrp/tune_helper.hpp b/host/include/uhd/usrp/tune_helper.hpp index db12241c1..e97ab0298 100644 --- a/host/include/uhd/usrp/tune_helper.hpp +++ b/host/include/uhd/usrp/tune_helper.hpp @@ -32,24 +32,21 @@ namespace uhd{ namespace usrp{ * The ddc cordic is setup to bring the IF down to baseband. * \param subdev the dboard subdevice object with properties * \param ddc the mboard dsp object with properties - * \param chan the channel of the dsp to tune * \param tune_request tune request instructions * \return a tune result struct */ UHD_API tune_result_t tune_rx_subdev_and_dsp( - wax::obj subdev, wax::obj ddc, size_t chan, - const tune_request_t &tune_request + wax::obj subdev, wax::obj ddc, const tune_request_t &tune_request ); /*! * Calculate the overall frequency from the combination of dboard IF and DDC shift. * \param subdev the dboard subdevice object with properties * \param ddc the mboard dsp object with properties - * \param chan the channel of the dsp to tune * \return the overall tune frequency of the system in Hz */ UHD_API double derive_freq_from_rx_subdev_and_dsp( - wax::obj subdev, wax::obj ddc, size_t chan + wax::obj subdev, wax::obj ddc ); /*! @@ -59,24 +56,21 @@ namespace uhd{ namespace usrp{ * The duc cordic is setup to bring the baseband up to IF. * \param subdev the dboard subdevice object with properties * \param duc the mboard dsp object with properties - * \param chan the channel of the dsp to tune * \param tune_request tune request instructions * \return a tune result struct */ UHD_API tune_result_t tune_tx_subdev_and_dsp( - wax::obj subdev, wax::obj duc, size_t chan, - const tune_request_t &tune_request + wax::obj subdev, wax::obj duc, const tune_request_t &tune_request ); /*! * Calculate the overall frequency from the combination of dboard IF and DUC shift. * \param subdev the dboard subdevice object with properties * \param duc the mboard dsp object with properties - * \param chan the channel of the dsp to tune * \return the overall tune frequency of the system in Hz */ UHD_API double derive_freq_from_tx_subdev_and_dsp( - wax::obj subdev, wax::obj duc, size_t chan + wax::obj subdev, wax::obj duc ); }} diff --git a/host/include/uhd/utils/CMakeLists.txt b/host/include/uhd/utils/CMakeLists.txt index 0dee310a8..70f724c2d 100644 --- a/host/include/uhd/utils/CMakeLists.txt +++ b/host/include/uhd/utils/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2010 Ettus Research LLC +# Copyright 2010-2011 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -17,11 +17,10 @@ INSTALL(FILES algorithm.hpp - assert.hpp - assert.ipp + assert_has.hpp + assert_has.ipp byteswap.hpp byteswap.ipp - exception.hpp gain_group.hpp images.hpp pimpl.hpp diff --git a/host/include/uhd/utils/algorithm.hpp b/host/include/uhd/utils/algorithm.hpp index d3a07db96..5598d862b 100644 --- a/host/include/uhd/utils/algorithm.hpp +++ b/host/include/uhd/utils/algorithm.hpp @@ -21,24 +21,12 @@ #include <algorithm> #include <boost/range/begin.hpp> #include <boost/range/end.hpp> -#include <boost/range/size.hpp> -/*! \file algorithm.hpp +/*! * Useful templated functions and classes that I like to pretend are part of stl. * Many of the range wrapper functions come with recent versions of boost (1.43). */ -namespace std{ - - /*! - * A wrapper around std::sort that takes a range instead of an iterator. - * - * The elements are sorted into ascending order using the less-than operator. - * - * \param range the range of elements to be sorted - */ - template<typename Range> inline void sort(Range &range){ - return std::sort(boost::begin(range), boost::end(range)); - } +namespace uhd{ /*! * A wrapper around std::sort that takes a range instead of an iterator. @@ -51,18 +39,7 @@ namespace std{ * \return a new range with the elements sorted */ template<typename Range> inline Range sorted(const Range &range){ - Range srange(range); std::sort(srange); return srange; - } - - /*! - * A wrapper around std::reverse that takes a range instead of an iterator. - * - * The elements are reversed into descending order using the less-than operator. - * - * \param range the range of elements to be reversed - */ - template<typename Range> inline void reverse(Range &range){ - return std::reverse(boost::begin(range), boost::end(range)); + Range r(range); std::sort(boost::begin(r), boost::end(r)); return r; } /*! @@ -76,7 +53,7 @@ namespace std{ * \return a new range with the elements reversed */ template<typename Range> inline Range reversed(const Range &range){ - Range srange(range); std::reverse(srange); return srange; + Range r(range); std::reverse(boost::begin(r), boost::end(r)); return r; } /*! @@ -94,35 +71,6 @@ namespace std{ } /*! - * Count the number of appearances of a value in a range. - * - * Uses std::count to count the appearances in the range. - * - * \param range the elements to iterate through - * \param value the value to count in the range - * \return the number of appearances of the value - */ - template<typename Range, typename T> inline - size_t count(const Range &range, const T &value){ - return std::count(boost::begin(range), boost::end(range), value); - } - - /*! - * Are the ranges equal (are their elements equivalent)? - * - * Uses std::equal to search the iterable for an element. - * - * \param range1 the first range of elements - * \param range2 the second range of elements - * \return true when the elements are equivalent - */ - template<typename Range> inline - bool equal(const Range &range1, const Range &range2){ - return (boost::size(range1) == boost::size(range2)) and - std::equal(boost::begin(range1), boost::end(range1), boost::begin(range2)); - } - - /*! * A templated clip implementation. * \param val the value to clip between an upper and lower limit * \param bound1 the upper or lower bound @@ -137,6 +85,6 @@ namespace std{ return val; } -}//namespace std +} //namespace uhd #endif /* INCLUDED_UHD_UTILS_ALGORITHM_HPP */ diff --git a/host/include/uhd/utils/assert.hpp b/host/include/uhd/utils/assert_has.hpp index 7f7b71cfb..eae7652ad 100644 --- a/host/include/uhd/utils/assert.hpp +++ b/host/include/uhd/utils/assert_has.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -15,26 +15,14 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#ifndef INCLUDED_UHD_UTILS_ASSERT_HPP -#define INCLUDED_UHD_UTILS_ASSERT_HPP +#ifndef INCLUDED_UHD_UTILS_ASSERT_HAS_HPP +#define INCLUDED_UHD_UTILS_ASSERT_HAS_HPP #include <uhd/config.hpp> -#include <uhd/utils/exception.hpp> -#include <stdexcept> #include <string> namespace uhd{ - //! The exception to throw when assertions fail - struct UHD_API assert_error : std::runtime_error{ - assert_error(const std::string &what); - }; - - //! Throw an assert error with throw-site information - #define UHD_ASSERT_THROW(_x) if (not (_x)) throw uhd::assert_error( \ - UHD_THROW_SITE_INFO("assertion failed: " + std::string(#_x)) \ - ); else void(0) - /*! * Check that an element is found in a container. * If not, throw a meaningful assertion error. @@ -54,6 +42,6 @@ namespace uhd{ }//namespace uhd -#include <uhd/utils/assert.ipp> +#include <uhd/utils/assert_has.ipp> -#endif /* INCLUDED_UHD_UTILS_ASSERT_HPP */ +#endif /* INCLUDED_UHD_UTILS_ASSERT_HAS_HPP */ diff --git a/host/include/uhd/utils/assert.ipp b/host/include/uhd/utils/assert_has.ipp index 6a8b3e417..7b3c88cb7 100644 --- a/host/include/uhd/utils/assert.ipp +++ b/host/include/uhd/utils/assert_has.ipp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -15,10 +15,11 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#ifndef INCLUDED_UHD_UTILS_ASSERT_IPP -#define INCLUDED_UHD_UTILS_ASSERT_IPP +#ifndef INCLUDED_UHD_UTILS_ASSERT_HAS_IPP +#define INCLUDED_UHD_UTILS_ASSERT_HAS_IPP #include <uhd/utils/algorithm.hpp> +#include <uhd/exception.hpp> #include <boost/format.hpp> #include <boost/foreach.hpp> #include <boost/lexical_cast.hpp> @@ -30,14 +31,14 @@ namespace uhd{ const T &value, const std::string &what ){ - if (std::has(range, value)) return; + if (uhd::has(range, value)) return; std::string possible_values = ""; size_t i = 0; BOOST_FOREACH(const T &v, range){ if (i++ > 0) possible_values += ", "; possible_values += boost::lexical_cast<std::string>(v); } - throw uhd::assert_error(str(boost::format( + throw uhd::assertion_error(str(boost::format( "assertion failed:\n" " %s is not a valid %s.\n" " possible values are: [%s].\n" @@ -49,4 +50,4 @@ namespace uhd{ }//namespace uhd -#endif /* INCLUDED_UHD_UTILS_ASSERT_IPP */ +#endif /* INCLUDED_UHD_UTILS_ASSERT_HAS_IPP */ diff --git a/host/include/uhd/utils/exception.hpp b/host/include/uhd/utils/exception.hpp deleted file mode 100644 index e74c19b9c..000000000 --- a/host/include/uhd/utils/exception.hpp +++ /dev/null @@ -1,45 +0,0 @@ -// -// Copyright 2010 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#ifndef INCLUDED_UHD_UTILS_EXCEPTION_HPP -#define INCLUDED_UHD_UTILS_EXCEPTION_HPP - -#include <uhd/config.hpp> -#include <boost/current_function.hpp> -#include <stdexcept> -#include <string> - -/*! - * Create a formated string with throw-site information. - * Fills in the function name, file name, and line number. - * \param what the std::exeption message - * \return the formatted exception message - */ -#define UHD_THROW_SITE_INFO(what) std::string( \ - std::string(what) + "\n" + \ - " in " + std::string(BOOST_CURRENT_FUNCTION) + "\n" + \ - " at " + std::string(__FILE__) + ":" + BOOST_STRINGIZE(__LINE__) + "\n" \ -) - -/*! - * Throws an invalid code path exception with throw-site information. - * Use this macro in places that code execution is not supposed to go. - */ -#define UHD_THROW_INVALID_CODE_PATH() \ - throw std::runtime_error(UHD_THROW_SITE_INFO("invalid code path")) - -#endif /* INCLUDED_UHD_UTILS_EXCEPTION_HPP */ diff --git a/host/include/uhd/utils/props.hpp b/host/include/uhd/utils/props.hpp index fbca03019..81737423a 100644 --- a/host/include/uhd/utils/props.hpp +++ b/host/include/uhd/utils/props.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -20,8 +20,7 @@ #include <uhd/config.hpp> #include <uhd/wax.hpp> -#include <uhd/utils/exception.hpp> -#include <stdexcept> +#include <uhd/exception.hpp> #include <vector> #include <string> @@ -68,14 +67,14 @@ namespace uhd{ * Throw-site information will be included with this error. */ #define UHD_THROW_PROP_GET_ERROR() \ - throw std::runtime_error(UHD_THROW_SITE_INFO("cannot get this property")) + throw uhd::key_error(UHD_THROW_SITE_INFO("cannot get this property")) /*! * Throw when setting a not-implemented or read-only property. * Throw-site information will be included with this error. */ #define UHD_THROW_PROP_SET_ERROR() \ - throw std::runtime_error(UHD_THROW_SITE_INFO("cannot set this property")) + throw uhd::key_error(UHD_THROW_SITE_INFO("cannot set this property")) } //namespace uhd diff --git a/host/include/uhd/utils/safe_call.hpp b/host/include/uhd/utils/safe_call.hpp index e23e508c8..6b2c210af 100644 --- a/host/include/uhd/utils/safe_call.hpp +++ b/host/include/uhd/utils/safe_call.hpp @@ -19,7 +19,7 @@ #define INCLUDED_UHD_UTILS_SAFE_CALL_HPP #include <uhd/config.hpp> -#include <uhd/utils/exception.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/warning.hpp> //! helper macro for safe call to produce warnings diff --git a/host/include/uhd/wax.hpp b/host/include/uhd/wax.hpp index 14e6734a5..6fd2b8652 100644 --- a/host/include/uhd/wax.hpp +++ b/host/include/uhd/wax.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -19,7 +19,10 @@ #define INCLUDED_WAX_HPP #include <uhd/config.hpp> +#include <uhd/exception.hpp> #include <boost/any.hpp> +#include <typeinfo> +#include <string> /*! * WAX - it's a metaphor! @@ -47,12 +50,6 @@ namespace wax{ /*! - * The wax::bad cast will be thrown when - * cast is called with the wrong typeid. - */ - typedef boost::bad_any_cast bad_cast; - - /*! * WAX object base class: * * A wax obj has two major purposes: @@ -140,7 +137,12 @@ namespace wax{ * \throw wax::bad_cast when the cast fails */ template<class T> T as(void) const{ - return boost::any_cast<T>(resolve()); + try{ + return boost::any_cast<T>(resolve()); + } + catch(const boost::bad_any_cast &e){ + throw uhd::type_error(std::string("") + "Cannot wax cast " + type().name() + " to " + typeid(T).name() + " " + e.what()); + } } private: diff --git a/host/lib/CMakeLists.txt b/host/lib/CMakeLists.txt index 8096c15d8..dbfa234b6 100644 --- a/host/lib/CMakeLists.txt +++ b/host/lib/CMakeLists.txt @@ -15,6 +15,10 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. # +#Creating a shared pointer itself has allocation overhead. +#Define the quick allocator to reduce fast-path overhead. +ADD_DEFINITIONS(-DBOOST_SP_USE_QUICK_ALLOCATOR) + ######################################################################## # Helpful Macros ######################################################################## @@ -97,6 +101,7 @@ INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR}) LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_BINARY_DIR}/constants.hpp ${CMAKE_CURRENT_SOURCE_DIR}/device.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/exception.cpp ${CMAKE_CURRENT_SOURCE_DIR}/version.cpp ${CMAKE_CURRENT_SOURCE_DIR}/wax.cpp ) diff --git a/host/lib/convert/convert_impl.cpp b/host/lib/convert/convert_impl.cpp index 6a5a1465d..d43cecfec 100644 --- a/host/lib/convert/convert_impl.cpp +++ b/host/lib/convert/convert_impl.cpp @@ -17,7 +17,7 @@ #include <uhd/convert.hpp> #include <uhd/utils/static.hpp> -#include <uhd/utils/exception.hpp> +#include <uhd/exception.hpp> #include <iostream> using namespace uhd; diff --git a/host/lib/convert/gen_convert_pred.py b/host/lib/convert/gen_convert_pred.py index d2f90bf41..360fbcf44 100644 --- a/host/lib/convert/gen_convert_pred.py +++ b/host/lib/convert/gen_convert_pred.py @@ -21,11 +21,11 @@ TMPL_TEXT = """ /*********************************************************************** * This file was generated by $file on $time.strftime("%c") **********************************************************************/ +\#include <uhd/exception.hpp> \#include <boost/tokenizer.hpp> \#include <boost/lexical_cast.hpp> \#include <boost/detail/endian.hpp> \#include <boost/cstdint.hpp> -\#include <stdexcept> \#include <string> \#include <vector> @@ -37,9 +37,10 @@ enum dir_type{ DIR_CPU_TO_OTW = 1 }; -struct pred_error : std::runtime_error{ - pred_error(const std::string &what) - :std::runtime_error("convert::make_pred: " + what){ +struct pred_error : uhd::value_error{ + pred_error(const std::string &what): + uhd::value_error("convert::make_pred: " + what) + { /* NOP */ } }; diff --git a/host/lib/device.cpp b/host/lib/device.cpp index 386588a08..0002bee6e 100644 --- a/host/lib/device.cpp +++ b/host/lib/device.cpp @@ -17,7 +17,7 @@ #include <uhd/device.hpp> #include <uhd/types/dict.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/algorithm.hpp> #include <boost/foreach.hpp> @@ -25,7 +25,6 @@ #include <boost/weak_ptr.hpp> #include <boost/functional/hash.hpp> #include <boost/tuple/tuple.hpp> -#include <stdexcept> #include <iostream> using namespace uhd; @@ -44,7 +43,7 @@ static size_t hash_device_addr( ){ //combine the hashes of sorted keys/value pairs size_t hash = 0; - BOOST_FOREACH(const std::string &key, std::sorted(dev_addr.keys())){ + BOOST_FOREACH(const std::string &key, uhd::sorted(dev_addr.keys())){ boost::hash_combine(hash, key); boost::hash_combine(hash, dev_addr[key]); } @@ -106,14 +105,14 @@ device::sptr device::make(const device_addr_t &hint, size_t which){ //check that we found any devices if (dev_addr_makers.size() == 0){ - throw std::runtime_error(str( + throw uhd::key_error(str( boost::format("No devices found for ----->\n%s") % hint.to_pp_string() )); } //check that the which index is valid if (dev_addr_makers.size() <= which){ - throw std::runtime_error(str( + throw uhd::index_error(str( boost::format("No device at index %d for ----->\n%s") % which % hint.to_pp_string() )); } @@ -140,7 +139,7 @@ device::sptr device::make(const device_addr_t &hint, size_t which){ return hash_to_device[dev_hash].lock(); } //create and register a new device - catch(const uhd::assert_error &){ + catch(const uhd::assertion_error &){ device::sptr dev = maker(dev_addr); hash_to_device[dev_hash] = dev; return dev; diff --git a/host/lib/exception.cpp b/host/lib/exception.cpp new file mode 100644 index 000000000..ecb1fe768 --- /dev/null +++ b/host/lib/exception.cpp @@ -0,0 +1,43 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/exception.hpp> +#include <boost/functional/hash.hpp> +#include <boost/format.hpp> + +using namespace uhd; + +exception::exception(const std::string &what): + std::runtime_error(what){/* NOP */} + +#define make_exception_impl(name, class, base) \ + class::class(const std::string &what): \ + base(str(boost::format("%s: %s") % name % what)){} \ + unsigned class::code(void) const{return boost::hash<std::string>()(#class) & 0xfff;} + +make_exception_impl("AssertionError", assertion_error, exception) +make_exception_impl("LookupError", lookup_error, exception) +make_exception_impl("IndexError", index_error, lookup_error) +make_exception_impl("KeyError", key_error, lookup_error) +make_exception_impl("TypeError", type_error, exception) +make_exception_impl("ValueError", value_error, exception) +make_exception_impl("RuntimeError", runtime_error, exception) +make_exception_impl("NotImplementedError", not_implemented_error, runtime_error) +make_exception_impl("EnvironmentError", environment_error, exception) +make_exception_impl("IOError", io_error, environment_error) +make_exception_impl("OSError", os_error, environment_error) +make_exception_impl("SystemError", system_error, exception) diff --git a/host/lib/ic_reg_maps/common.py b/host/lib/ic_reg_maps/common.py index 986093004..a509936b4 100644 --- a/host/lib/ic_reg_maps/common.py +++ b/host/lib/ic_reg_maps/common.py @@ -30,8 +30,8 @@ COMMON_TMPL = """\ \#define INCLUDED_$(name.upper())_HPP \#include <uhd/config.hpp> +\#include <uhd/exception.hpp> \#include <boost/cstdint.hpp> -\#include <stdexcept> \#include <set> class $(name)_t{ @@ -69,7 +69,7 @@ public: } template<typename T> std::set<T> get_changed_addrs(void){ - if (_state == NULL) throw std::runtime_error("no saved state"); + if (_state == NULL) throw uhd::runtime_error("no saved state"); //check each register for changes std::set<T> addrs; #for $reg in $regs diff --git a/host/lib/transport/gen_vrt_if_packet.py b/host/lib/transport/gen_vrt_if_packet.py index 427217eb6..8481932ed 100755 --- a/host/lib/transport/gen_vrt_if_packet.py +++ b/host/lib/transport/gen_vrt_if_packet.py @@ -31,10 +31,10 @@ TMPL_TEXT = """ * This file was generated by $file on $time.strftime("%c") **********************************************************************/ +\#include <uhd/exception.hpp> \#include <uhd/transport/vrt_if_packet.hpp> \#include <uhd/utils/byteswap.hpp> \#include <boost/detail/endian.hpp> -\#include <stdexcept> \#include <vector> //define the endian macros to convert integers @@ -157,7 +157,7 @@ void vrt::if_hdr_unpack_$(suffix)( //failure case if (if_packet_info.num_packet_words32 < packet_words32) - throw std::runtime_error("bad vrt header or packet fragment"); + throw uhd::value_error("bad vrt header or packet fragment"); */ //Fix for short packets sent from the fpga: // Use the num_packet_words32 passed in as input, @@ -223,7 +223,7 @@ void vrt::if_hdr_unpack_$(suffix)( ########## Variables ########## //another failure case if (packet_words32 < $($num_header_words + $num_trailer_words)) - throw std::runtime_error("bad vrt header or invalid packet length"); + throw uhd::value_error("bad vrt header or invalid packet length"); if_packet_info.num_header_words32 = $num_header_words; if_packet_info.num_payload_words32 = packet_words32 - $($num_header_words + $num_trailer_words); break; diff --git a/host/lib/transport/libusb1_base.cpp b/host/lib/transport/libusb1_base.cpp index cfa77d9ca..6d4df7875 100644 --- a/host/lib/transport/libusb1_base.cpp +++ b/host/lib/transport/libusb1_base.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,7 +16,7 @@ // #include "libusb1_base.hpp" -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/types/dict.hpp> #include <boost/weak_ptr.hpp> #include <boost/foreach.hpp> @@ -93,7 +93,7 @@ public: //allocate a new list of devices libusb_device** dev_list; ssize_t ret = libusb_get_device_list(sess->get_context(), &dev_list); - if (ret < 0) throw std::runtime_error("cannot enumerate usb devices"); + if (ret < 0) throw uhd::os_error("cannot enumerate usb devices"); //fill the vector of device references for (size_t i = 0; i < size_t(ret); i++) _devs.push_back( @@ -206,9 +206,9 @@ libusb::device_handle::sptr libusb::device_handle::get_cached_handle(device::spt handles[dev->get()] = new_handle; return new_handle; } - catch(const std::exception &e){ + catch(const uhd::exception &e){ std::cerr << "USB open failed: see the application notes for your device." << std::endl; - throw std::runtime_error(e.what()); + throw; } } diff --git a/host/lib/transport/libusb1_zero_copy.cpp b/host/lib/transport/libusb1_zero_copy.cpp index b425843fa..697944089 100644 --- a/host/lib/transport/libusb1_zero_copy.cpp +++ b/host/lib/transport/libusb1_zero_copy.cpp @@ -20,7 +20,7 @@ #include <uhd/transport/bounded_buffer.hpp> #include <uhd/transport/buffer_pool.hpp> #include <uhd/utils/thread_priority.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <boost/function.hpp> #include <boost/foreach.hpp> #include <boost/thread/thread.hpp> @@ -33,6 +33,17 @@ using namespace uhd::transport; static const size_t DEFAULT_NUM_XFERS = 16; //num xfers static const size_t DEFAULT_XFER_SIZE = 32*512; //bytes +//! helper function: handles all async callbacks +static void libusb_async_cb(libusb_transfer *lut){ + (*static_cast<boost::function<void()> *>(lut->user_data))(); +} + +//! callback to free transfer upon cancellation +static void cancel_transfer_cb(libusb_transfer *lut){ + if (lut->status == LIBUSB_TRANSFER_CANCELLED) libusb_free_transfer(lut); + else std::cout << "libusb cancel_transfer unexpected status " << lut->status << std::endl; +} + /*********************************************************************** * Reusable managed receiver buffer: * - Associated with a particular libusb transfer struct. @@ -79,7 +90,8 @@ public: void commit(size_t len){ if (_expired) return; _lut->length = len; - UHD_ASSERT_THROW(libusb_submit_transfer(_lut) == 0); + if(len == 0) libusb_async_cb(_lut); + else UHD_ASSERT_THROW(libusb_submit_transfer(_lut) == 0); _expired = true; } @@ -100,17 +112,6 @@ private: bool _expired; }; -//! helper function: handles all async callbacks -static void libusb_async_cb(libusb_transfer *lut){ - (*static_cast<boost::function<void()> *>(lut->user_data))(); -} - -//! callback to free transfer upon cancellation -static void cancel_transfer_cb(libusb_transfer *lut) { - if(lut->status == LIBUSB_TRANSFER_CANCELLED) libusb_free_transfer(lut); - else std::cout << "cancel_transfer unexpected status " << lut->status << std::endl; -} - /*********************************************************************** * USB zero_copy device class **********************************************************************/ diff --git a/host/lib/transport/usb_dummy_impl.cpp b/host/lib/transport/usb_dummy_impl.cpp index 8a9772e7f..930678405 100644 --- a/host/lib/transport/usb_dummy_impl.cpp +++ b/host/lib/transport/usb_dummy_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -18,7 +18,7 @@ #include <uhd/transport/usb_device_handle.hpp> #include <uhd/transport/usb_control.hpp> #include <uhd/transport/usb_zero_copy.hpp> -#include <uhd/utils/exception.hpp> +#include <uhd/exception.hpp> using namespace uhd; using namespace uhd::transport; @@ -28,12 +28,12 @@ std::vector<usb_device_handle::sptr> usb_device_handle::get_device_list(boost::u } usb_control::sptr usb_control::make(usb_device_handle::sptr){ - throw std::runtime_error("no usb support -> usb_control::make not implemented"); + throw uhd::not_implemented_error("no usb support -> usb_control::make not implemented"); } usb_zero_copy::sptr usb_zero_copy::make( usb_device_handle::sptr, size_t, size_t, const device_addr_t & ){ - throw std::runtime_error("no usb support -> usb_zero_copy::make not implemented"); + throw uhd::not_implemented_error("no usb support -> usb_zero_copy::make not implemented"); } diff --git a/host/lib/transport/vrt_packet_handler.hpp b/host/lib/transport/vrt_packet_handler.hpp index 6f3ac0421..d74b2c13c 100644 --- a/host/lib/transport/vrt_packet_handler.hpp +++ b/host/lib/transport/vrt_packet_handler.hpp @@ -20,7 +20,7 @@ #include <uhd/config.hpp> #include <uhd/device.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/byteswap.hpp> #include <uhd/types/io_type.hpp> #include <uhd/types/otw_type.hpp> @@ -300,18 +300,18 @@ template <typename T> UHD_INLINE T get_context_code( typedef boost::function<bool(managed_send_buffs_t &)> get_send_buffs_t; typedef boost::function<void(boost::uint32_t *, uhd::transport::vrt::if_packet_info_t &)> vrt_packer_t; + static const boost::uint64_t zeros = 0; + struct send_state{ //init the expected seq number size_t next_packet_seq; managed_send_buffs_t managed_buffs; - const boost::uint64_t zeros; std::vector<const void *> zero_buffs; std::vector<const void *> io_buffs; send_state(size_t width = 1): next_packet_seq(0), managed_buffs(width), - zeros(0), zero_buffs(width, &zeros), io_buffs(0) //resized later { diff --git a/host/lib/types/device_addr.cpp b/host/lib/types/device_addr.cpp index 14afaa24b..193f76f8c 100644 --- a/host/lib/types/device_addr.cpp +++ b/host/lib/types/device_addr.cpp @@ -16,10 +16,11 @@ // #include <uhd/types/device_addr.hpp> -#include <boost/algorithm/string.hpp> //for trim +#include <boost/algorithm/string.hpp> #include <boost/tokenizer.hpp> #include <boost/foreach.hpp> #include <boost/format.hpp> +#include <boost/regex.hpp> #include <stdexcept> #include <sstream> @@ -47,7 +48,7 @@ device_addr_t::device_addr_t(const std::string &args){ goto continue_next_arg; } } - throw std::runtime_error("invalid args string: "+args); + throw uhd::value_error("invalid args string: "+args); continue_next_arg: continue; } } @@ -71,3 +72,51 @@ std::string device_addr_t::to_string(void) const{ } return args_str; } + +#include <uhd/utils/warning.hpp> + +device_addrs_t uhd::separate_device_addr(const device_addr_t &dev_addr){ + //------------ support old deprecated way and print warning -------- + if (dev_addr.has_key("addr") and not dev_addr["addr"].empty()){ + std::vector<std::string> addrs; boost::split(addrs, dev_addr["addr"], boost::is_any_of(" ")); + if (addrs.size() > 1){ + device_addr_t fixed_dev_addr = dev_addr; + fixed_dev_addr.pop("addr"); + for (size_t i = 0; i < addrs.size(); i++){ + fixed_dev_addr[str(boost::format("addr%d") % i)] = addrs[i]; + } + uhd::warning::post( + "addr = <space separated list of ip addresses> is deprecated.\n" + "To address a multi-device, use multiple <key><index> = <val>.\n" + "See the USRP-NXXX application notes. Two device example:\n" + " addr0 = 192.168.10.2\n" + " addr1 = 192.168.10.3\n" + ); + return separate_device_addr(fixed_dev_addr); + } + } + //------------------------------------------------------------------ + device_addrs_t dev_addrs; + BOOST_FOREACH(const std::string &key, dev_addr.keys()){ + boost::cmatch matches; + if (not boost::regex_match(key.c_str(), matches, boost::regex("^(\\D+)(\\d*)$"))){ + throw std::runtime_error("unknown key format: " + key); + } + std::string key_part(matches[1].first, matches[1].second); + std::string num_part(matches[2].first, matches[2].second); + size_t num = (num_part.empty())? 0 : boost::lexical_cast<size_t>(num_part); + dev_addrs.resize(std::max(num+1, dev_addrs.size())); + dev_addrs[num][key_part] = dev_addr[key]; + } + return dev_addrs; +} + +device_addr_t uhd::combine_device_addrs(const device_addrs_t &dev_addrs){ + device_addr_t dev_addr; + for (size_t i = 0; i < dev_addrs.size(); i++){ + BOOST_FOREACH(const std::string &key, dev_addrs[i].keys()){ + dev_addr[str(boost::format("%s%d") % key % i)] = dev_addrs[i][key]; + } + } + return dev_addr; +} diff --git a/host/lib/types/mac_addr.cpp b/host/lib/types/mac_addr.cpp index cf3c3fa97..a5cb90f97 100644 --- a/host/lib/types/mac_addr.cpp +++ b/host/lib/types/mac_addr.cpp @@ -16,12 +16,11 @@ // #include <uhd/types/mac_addr.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <boost/tokenizer.hpp> #include <boost/foreach.hpp> #include <boost/format.hpp> #include <boost/cstdint.hpp> -#include <stdexcept> #include <sstream> using namespace uhd; @@ -40,7 +39,7 @@ mac_addr_t mac_addr_t::from_string(const std::string &mac_addr_str){ try{ if (mac_addr_str.size() != 17){ - throw std::runtime_error("expected exactly 17 characters"); + throw uhd::value_error("expected exactly 17 characters"); } //split the mac addr hex string at the colons @@ -55,7 +54,7 @@ mac_addr_t mac_addr_t::from_string(const std::string &mac_addr_str){ } catch(std::exception const& e){ - throw std::runtime_error(str( + throw uhd::value_error(str( boost::format("Invalid mac address: %s\n\t%s") % mac_addr_str % e.what() )); } diff --git a/host/lib/types/ranges.cpp b/host/lib/types/ranges.cpp index 4a0d05d80..6e39bc688 100644 --- a/host/lib/types/ranges.cpp +++ b/host/lib/types/ranges.cpp @@ -16,10 +16,10 @@ // #include <uhd/types/ranges.hpp> +#include <uhd/exception.hpp> #include <boost/math/special_functions/round.hpp> #include <boost/foreach.hpp> #include <algorithm> -#include <stdexcept> #include <sstream> using namespace uhd; @@ -48,7 +48,7 @@ range_t::range_t( _impl(UHD_PIMPL_MAKE(impl, (start, stop, step))) { if (stop < start){ - throw std::invalid_argument("cannot make range where stop < start"); + throw uhd::value_error("cannot make range where stop < start"); } } @@ -78,11 +78,11 @@ const std::string range_t::to_pp_string(void) const{ **********************************************************************/ void check_meta_range_monotonic(const meta_range_t &mr){ if (mr.empty()){ - throw std::runtime_error("meta-range cannot be empty"); + throw uhd::value_error("meta-range cannot be empty"); } for (size_t i = 1; i < mr.size(); i++){ if (mr.at(i).start() < mr.at(i-1).stop()){ - throw std::runtime_error("meta-range is not monotonic"); + throw uhd::value_error("meta-range is not monotonic"); } } } diff --git a/host/lib/types/sensors.cpp b/host/lib/types/sensors.cpp index dd8a170ea..52a63d14c 100644 --- a/host/lib/types/sensors.cpp +++ b/host/lib/types/sensors.cpp @@ -16,7 +16,7 @@ // #include <uhd/types/sensors.hpp> -#include <uhd/utils/exception.hpp> +#include <uhd/exception.hpp> #include <boost/lexical_cast.hpp> #include <boost/format.hpp> diff --git a/host/lib/types/serial.cpp b/host/lib/types/serial.cpp index 9acf7156a..aa1133e72 100644 --- a/host/lib/types/serial.cpp +++ b/host/lib/types/serial.cpp @@ -54,3 +54,25 @@ byte_vector_t i2c_iface::read_eeprom( } return bytes; } + +boost::uint32_t spi_iface::read_spi( + int which_slave, + const spi_config_t &config, + boost::uint16_t data, + size_t num_bits +){ + return transact_spi( + which_slave, config, data, num_bits, true + ); +} + +void spi_iface::write_spi( + int which_slave, + const spi_config_t &config, + boost::uint16_t data, + size_t num_bits +){ + transact_spi( + which_slave, config, data, num_bits, false + ); +} diff --git a/host/lib/usrp/CMakeLists.txt b/host/lib/usrp/CMakeLists.txt index 97a54a798..59dabbd58 100644 --- a/host/lib/usrp/CMakeLists.txt +++ b/host/lib/usrp/CMakeLists.txt @@ -31,7 +31,6 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_CURRENT_SOURCE_DIR}/multi_usrp.cpp ${CMAKE_CURRENT_SOURCE_DIR}/subdev_spec.cpp ${CMAKE_CURRENT_SOURCE_DIR}/tune_helper.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/wrapper_utils.hpp ) INCLUDE_SUBDIRECTORY(dboard) diff --git a/host/lib/usrp/dboard/db_basic_and_lf.cpp b/host/lib/usrp/dboard/db_basic_and_lf.cpp index b319289db..3fffeab0c 100644 --- a/host/lib/usrp/dboard/db_basic_and_lf.cpp +++ b/host/lib/usrp/dboard/db_basic_and_lf.cpp @@ -18,7 +18,7 @@ #include <uhd/usrp/subdev_props.hpp> #include <uhd/types/dict.hpp> #include <uhd/types/ranges.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/warning.hpp> #include <uhd/usrp/dboard_base.hpp> @@ -193,7 +193,7 @@ void basic_rx::rx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ANTENNA: if (val.as<std::string>().empty()) return; - throw std::runtime_error("no selectable antennas on this board"); + throw uhd::value_error("no selectable antennas on this board"); case SUBDEV_PROP_FREQ: return; // it wont do you much good, but you can set it @@ -300,7 +300,7 @@ void basic_tx::tx_set(const wax::obj &key_, const wax::obj &val){ case SUBDEV_PROP_ANTENNA: if (val.as<std::string>().empty()) return; - throw std::runtime_error("no selectable antennas on this board"); + throw uhd::value_error("no selectable antennas on this board"); case SUBDEV_PROP_FREQ: return; // it wont do you much good, but you can set it diff --git a/host/lib/usrp/dboard/db_dbsrx.cpp b/host/lib/usrp/dboard/db_dbsrx.cpp index 98d9479fc..b984608ca 100644 --- a/host/lib/usrp/dboard/db_dbsrx.cpp +++ b/host/lib/usrp/dboard/db_dbsrx.cpp @@ -21,7 +21,7 @@ #include "max2118_regs.hpp" #include <uhd/utils/static.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/algorithm.hpp> #include <uhd/utils/warning.hpp> #include <uhd/types/ranges.hpp> @@ -83,8 +83,8 @@ private: void set_bandwidth(double bandwidth); void send_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){ - start_reg = boost::uint8_t(std::clip(int(start_reg), 0x0, 0x5)); - stop_reg = boost::uint8_t(std::clip(int(stop_reg), 0x0, 0x5)); + start_reg = boost::uint8_t(uhd::clip(int(start_reg), 0x0, 0x5)); + stop_reg = boost::uint8_t(uhd::clip(int(stop_reg), 0x0, 0x5)); for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t) - 1){ int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) - 1 ? sizeof(boost::uint32_t) - 1 : stop_reg - start_addr + 1; @@ -112,8 +112,8 @@ private: void read_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){ static const boost::uint8_t status_addr = 0x0; - start_reg = boost::uint8_t(std::clip(int(start_reg), 0x0, 0x1)); - stop_reg = boost::uint8_t(std::clip(int(stop_reg), 0x0, 0x1)); + start_reg = boost::uint8_t(uhd::clip(int(start_reg), 0x0, 0x1)); + stop_reg = boost::uint8_t(uhd::clip(int(stop_reg), 0x0, 0x1)); for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t)){ int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) ? sizeof(boost::uint32_t) : stop_reg - start_addr + 1; @@ -237,8 +237,8 @@ void dbsrx::set_lo_freq(double target_freq){ bool update_filter_settings = false; //choose refclock std::vector<double> clock_rates = this->get_iface()->get_clock_rates(dboard_iface::UNIT_RX); - const double max_clock_rate = std::sorted(clock_rates).back(); - BOOST_FOREACH(ref_clock, std::reversed(std::sorted(clock_rates))){ + const double max_clock_rate = uhd::sorted(clock_rates).back(); + BOOST_FOREACH(ref_clock, uhd::reversed(uhd::sorted(clock_rates))){ if (ref_clock > 27.0e6) continue; if (size_t(max_clock_rate/ref_clock)%2 == 1) continue; //reject asymmetric clocks (odd divisors) @@ -485,14 +485,14 @@ void dbsrx::set_gain(double gain, const std::string &name){ **********************************************************************/ void dbsrx::set_bandwidth(double bandwidth){ //clip the input - bandwidth = std::clip<double>(bandwidth, 4e6, 33e6); + bandwidth = uhd::clip<double>(bandwidth, 4e6, 33e6); double ref_clock = this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX); //NOTE: _max2118_write_regs.m_divider set in set_lo_freq //compute f_dac setting - _max2118_write_regs.f_dac = std::clip<int>(int((((bandwidth*_max2118_write_regs.m_divider)/ref_clock) - 4)/0.145),0,127); + _max2118_write_regs.f_dac = uhd::clip<int>(int((((bandwidth*_max2118_write_regs.m_divider)/ref_clock) - 4)/0.145),0,127); //determine actual bandwidth _bandwidth = double((ref_clock/(_max2118_write_regs.m_divider))*(4+0.145*_max2118_write_regs.f_dac)); diff --git a/host/lib/usrp/dboard/db_dbsrx2.cpp b/host/lib/usrp/dboard/db_dbsrx2.cpp index f4b797995..e7b42cb05 100644 --- a/host/lib/usrp/dboard/db_dbsrx2.cpp +++ b/host/lib/usrp/dboard/db_dbsrx2.cpp @@ -19,7 +19,7 @@ #include "max2112_regs.hpp" #include <uhd/utils/static.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/algorithm.hpp> #include <uhd/types/ranges.hpp> #include <uhd/types/sensors.hpp> @@ -79,8 +79,8 @@ private: void set_bandwidth(double bandwidth); void send_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){ - start_reg = boost::uint8_t(std::clip(int(start_reg), 0x0, 0xB)); - stop_reg = boost::uint8_t(std::clip(int(stop_reg), 0x0, 0xB)); + start_reg = boost::uint8_t(uhd::clip(int(start_reg), 0x0, 0xB)); + stop_reg = boost::uint8_t(uhd::clip(int(stop_reg), 0x0, 0xB)); for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t) - 1){ int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) - 1 ? sizeof(boost::uint32_t) - 1 : stop_reg - start_addr + 1; @@ -108,8 +108,8 @@ private: void read_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){ static const boost::uint8_t status_addr = 0xC; - start_reg = boost::uint8_t(std::clip(int(start_reg), 0x0, 0xD)); - stop_reg = boost::uint8_t(std::clip(int(stop_reg), 0x0, 0xD)); + start_reg = boost::uint8_t(uhd::clip(int(start_reg), 0x0, 0xD)); + stop_reg = boost::uint8_t(uhd::clip(int(stop_reg), 0x0, 0xD)); for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t)){ int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) ? sizeof(boost::uint32_t) : stop_reg - start_addr + 1; @@ -216,7 +216,7 @@ dbsrx2::~dbsrx2(void){ * Tuning **********************************************************************/ void dbsrx2::set_lo_freq(double target_freq){ - //target_freq = std::clip(target_freq, dbsrx2_freq_range.min, dbsrx2_freq_range.max); + //target_freq = uhd::clip(target_freq, dbsrx2_freq_range.min, dbsrx2_freq_range.max); //variables used in the calculation below int scaler = target_freq > 1125e6 ? 2 : 4; @@ -330,7 +330,7 @@ void dbsrx2::set_gain(double gain, const std::string &name){ **********************************************************************/ void dbsrx2::set_bandwidth(double bandwidth){ //clip the input - bandwidth = std::clip<double>(bandwidth, 4e6, 40e6); + bandwidth = uhd::clip<double>(bandwidth, 4e6, 40e6); _max2112_write_regs.lp = int((bandwidth/1e6 - 4)/0.29 + 12); _bandwidth = double(4 + (_max2112_write_regs.lp - 12) * 0.29)*1e6; diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp index 3e3cf00f2..4d8222a52 100644 --- a/host/lib/usrp/dboard/db_rfx.cpp +++ b/host/lib/usrp/dboard/db_rfx.cpp @@ -37,7 +37,7 @@ #include <uhd/usrp/subdev_props.hpp> #include <uhd/types/ranges.hpp> #include <uhd/types/sensors.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/algorithm.hpp> #include <uhd/utils/warning.hpp> @@ -245,7 +245,7 @@ static double rx_pga0_gain_to_dac_volts(double &gain, double range){ static const double slope = (max_volts-min_volts)/(range); //calculate the voltage for the aux dac - double dac_volts = std::clip<double>(gain*slope + min_volts, max_volts, min_volts); + double dac_volts = uhd::clip<double>(gain*slope + min_volts, max_volts, min_volts); //the actual gain setting gain = (dac_volts - min_volts)/slope; diff --git a/host/lib/usrp/dboard/db_tvrx.cpp b/host/lib/usrp/dboard/db_tvrx.cpp index af025952e..d264c9ca4 100644 --- a/host/lib/usrp/dboard/db_tvrx.cpp +++ b/host/lib/usrp/dboard/db_tvrx.cpp @@ -28,7 +28,7 @@ //gain range: [0:1dB:115dB] #include <uhd/utils/static.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/algorithm.hpp> #include <uhd/utils/warning.hpp> #include <uhd/types/ranges.hpp> @@ -241,7 +241,7 @@ static std::string get_band(double freq) { static double gain_interp(double gain, boost::array<double, 17> db_vector, boost::array<double, 17> volts_vector) { double volts; - gain = std::clip<double>(gain, db_vector.front(), db_vector.back()); //let's not get carried away here + gain = uhd::clip<double>(gain, db_vector.front(), db_vector.back()); //let's not get carried away here boost::uint8_t gain_step = 0; //find which bin we're in @@ -288,7 +288,7 @@ static double rf_gain_to_voltage(double gain, double lo_freq){ //this is the voltage at the USRP DAC output double dac_volts = gain_volts / opamp_gain; - dac_volts = std::clip<double>(dac_volts, 0.0, 3.3); + dac_volts = uhd::clip<double>(dac_volts, 0.0, 3.3); if (tvrx_debug) std::cerr << boost::format( "tvrx RF AGC gain: %f dB, dac_volts: %f V" @@ -311,7 +311,7 @@ static double if_gain_to_voltage(double gain){ double gain_volts = gain_interp(gain, tvrx_if_gains_db, tvrx_gains_volts); double dac_volts = gain_volts / opamp_gain; - dac_volts = std::clip<double>(dac_volts, 0.0, 3.3); + dac_volts = uhd::clip<double>(dac_volts, 0.0, 3.3); if (tvrx_debug) std::cerr << boost::format( "tvrx IF AGC gain: %f dB, dac_volts: %f V" diff --git a/host/lib/usrp/dboard/db_unknown.cpp b/host/lib/usrp/dboard/db_unknown.cpp index f0a4c000e..cef4bee4a 100644 --- a/host/lib/usrp/dboard/db_unknown.cpp +++ b/host/lib/usrp/dboard/db_unknown.cpp @@ -17,7 +17,7 @@ #include <uhd/usrp/subdev_props.hpp> #include <uhd/types/ranges.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/warning.hpp> #include <uhd/usrp/dboard_base.hpp> diff --git a/host/lib/usrp/dboard/db_wbx.cpp b/host/lib/usrp/dboard/db_wbx.cpp index 0bc2d0ca1..2e9a1edc8 100644 --- a/host/lib/usrp/dboard/db_wbx.cpp +++ b/host/lib/usrp/dboard/db_wbx.cpp @@ -69,7 +69,7 @@ #include <uhd/usrp/subdev_props.hpp> #include <uhd/types/ranges.hpp> #include <uhd/types/sensors.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/algorithm.hpp> #include <uhd/utils/warning.hpp> diff --git a/host/lib/usrp/dboard/db_xcvr2450.cpp b/host/lib/usrp/dboard/db_xcvr2450.cpp index f4f74eb86..9d25b30a5 100644 --- a/host/lib/usrp/dboard/db_xcvr2450.cpp +++ b/host/lib/usrp/dboard/db_xcvr2450.cpp @@ -49,7 +49,7 @@ #include "max2829_regs.hpp" #include <uhd/utils/static.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/algorithm.hpp> #include <uhd/utils/warning.hpp> #include <uhd/types/ranges.hpp> @@ -358,7 +358,7 @@ void xcvr2450::set_rx_ant(const std::string &ant){ */ static int gain_to_tx_vga_reg(double &gain){ //calculate the register value - int reg = std::clip(boost::math::iround(gain*60/30.0) + 3, 0, 63); + int reg = uhd::clip(boost::math::iround(gain*60/30.0) + 3, 0, 63); //calculate the actual gain value if (reg < 4) gain = 0; @@ -376,7 +376,7 @@ static int gain_to_tx_vga_reg(double &gain){ * \return gain enum value */ static max2829_regs_t::tx_baseband_gain_t gain_to_tx_bb_reg(double &gain){ - int reg = std::clip(boost::math::iround(gain*3/5.0), 0, 3); + int reg = uhd::clip(boost::math::iround(gain*3/5.0), 0, 3); switch(reg){ case 0: gain = 0; @@ -401,7 +401,7 @@ static max2829_regs_t::tx_baseband_gain_t gain_to_tx_bb_reg(double &gain){ * \return 5 bit the register value */ static int gain_to_rx_vga_reg(double &gain){ - int reg = std::clip(boost::math::iround(gain/2.0), 0, 31); + int reg = uhd::clip(boost::math::iround(gain/2.0), 0, 31); gain = double(reg*2); return reg; } @@ -413,7 +413,7 @@ static int gain_to_rx_vga_reg(double &gain){ * \return 2 bit the register value */ static int gain_to_rx_lna_reg(double &gain){ - int reg = std::clip(boost::math::iround(gain*2/30.5) + 1, 0, 3); + int reg = uhd::clip(boost::math::iround(gain*2/30.5) + 1, 0, 3); switch(reg){ case 0: case 1: gain = 0; break; @@ -456,7 +456,7 @@ void xcvr2450::set_rx_gain(double gain, const std::string &name){ * Bandwidth Handling **********************************************************************/ static max2829_regs_t::tx_lpf_coarse_adj_t bandwidth_to_tx_lpf_coarse_reg(double &bandwidth){ - int reg = std::clip(boost::math::iround((bandwidth-6.0e6)/6.0e6), 1, 3); + int reg = uhd::clip(boost::math::iround((bandwidth-6.0e6)/6.0e6), 1, 3); switch(reg){ case 1: // bandwidth < 15MHz @@ -473,7 +473,7 @@ static max2829_regs_t::tx_lpf_coarse_adj_t bandwidth_to_tx_lpf_coarse_reg(double } static max2829_regs_t::rx_lpf_fine_adj_t bandwidth_to_rx_lpf_fine_reg(double &bandwidth, double requested_bandwidth){ - int reg = std::clip(boost::math::iround((requested_bandwidth/bandwidth)/0.05), 18, 22); + int reg = uhd::clip(boost::math::iround((requested_bandwidth/bandwidth)/0.05), 18, 22); switch(reg){ case 18: // requested_bandwidth < 92.5% @@ -496,7 +496,7 @@ static max2829_regs_t::rx_lpf_fine_adj_t bandwidth_to_rx_lpf_fine_reg(double &ba } static max2829_regs_t::rx_lpf_coarse_adj_t bandwidth_to_rx_lpf_coarse_reg(double &bandwidth){ - int reg = std::clip(boost::math::iround((bandwidth-7.0e6)/1.0e6), 0, 11); + int reg = uhd::clip(boost::math::iround((bandwidth-7.0e6)/1.0e6), 0, 11); switch(reg){ case 0: // bandwidth < 7.5MHz diff --git a/host/lib/usrp/dboard_base.cpp b/host/lib/usrp/dboard_base.cpp index 6c4e29d9e..999dd9ffc 100644 --- a/host/lib/usrp/dboard_base.cpp +++ b/host/lib/usrp/dboard_base.cpp @@ -59,12 +59,12 @@ dboard_id_t dboard_base::get_tx_id(void){ **********************************************************************/ xcvr_dboard_base::xcvr_dboard_base(ctor_args_t args) : dboard_base(args){ if (get_rx_id() == dboard_id_t::none()){ - throw std::runtime_error(str(boost::format( + throw uhd::runtime_error(str(boost::format( "cannot create xcvr board when the rx id is \"%s\"" ) % dboard_id_t::none().to_pp_string())); } if (get_tx_id() == dboard_id_t::none()){ - throw std::runtime_error(str(boost::format( + throw uhd::runtime_error(str(boost::format( "cannot create xcvr board when the tx id is \"%s\"" ) % dboard_id_t::none().to_pp_string())); } @@ -79,7 +79,7 @@ xcvr_dboard_base::~xcvr_dboard_base(void){ **********************************************************************/ rx_dboard_base::rx_dboard_base(ctor_args_t args) : dboard_base(args){ if (get_tx_id() != dboard_id_t::none()){ - throw std::runtime_error(str(boost::format( + throw uhd::runtime_error(str(boost::format( "cannot create rx board when the tx id is \"%s\"" " -> expected a tx id of \"%s\"" ) % get_tx_id().to_pp_string() % dboard_id_t::none().to_pp_string())); @@ -91,11 +91,11 @@ rx_dboard_base::~rx_dboard_base(void){ } void rx_dboard_base::tx_get(const wax::obj &, wax::obj &){ - throw std::runtime_error("cannot call tx_get on a rx dboard"); + throw uhd::runtime_error("cannot call tx_get on a rx dboard"); } void rx_dboard_base::tx_set(const wax::obj &, const wax::obj &){ - throw std::runtime_error("cannot call tx_set on a rx dboard"); + throw uhd::runtime_error("cannot call tx_set on a rx dboard"); } /*********************************************************************** @@ -103,7 +103,7 @@ void rx_dboard_base::tx_set(const wax::obj &, const wax::obj &){ **********************************************************************/ tx_dboard_base::tx_dboard_base(ctor_args_t args) : dboard_base(args){ if (get_rx_id() != dboard_id_t::none()){ - throw std::runtime_error(str(boost::format( + throw uhd::runtime_error(str(boost::format( "cannot create tx board when the rx id is \"%s\"" " -> expected a rx id of \"%s\"" ) % get_rx_id().to_pp_string() % dboard_id_t::none().to_pp_string())); @@ -115,9 +115,9 @@ tx_dboard_base::~tx_dboard_base(void){ } void tx_dboard_base::rx_get(const wax::obj &, wax::obj &){ - throw std::runtime_error("cannot call rx_get on a tx dboard"); + throw uhd::runtime_error("cannot call rx_get on a tx dboard"); } void tx_dboard_base::rx_set(const wax::obj &, const wax::obj &){ - throw std::runtime_error("cannot call rx_set on a tx dboard"); + throw uhd::runtime_error("cannot call rx_set on a tx dboard"); } diff --git a/host/lib/usrp/dboard_eeprom.cpp b/host/lib/usrp/dboard_eeprom.cpp index c47390bf8..c1e44fb74 100644 --- a/host/lib/usrp/dboard_eeprom.cpp +++ b/host/lib/usrp/dboard_eeprom.cpp @@ -16,7 +16,8 @@ // #include <uhd/usrp/dboard_eeprom.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> +#include <boost/foreach.hpp> #include <boost/format.hpp> #include <algorithm> #include <iostream> @@ -128,7 +129,7 @@ void dboard_eeprom_t::load(i2c_iface &iface, boost::uint8_t addr){ &bytes.at(DB_EEPROM_SERIAL+DB_EEPROM_SERIAL_LEN)) ); - }catch(const uhd::assert_error &){ + }catch(const uhd::assertion_error &){ id = dboard_id_t::none(); serial = ""; } diff --git a/host/lib/usrp/dboard_manager.cpp b/host/lib/usrp/dboard_manager.cpp index 75594e670..9055905b1 100644 --- a/host/lib/usrp/dboard_manager.cpp +++ b/host/lib/usrp/dboard_manager.cpp @@ -20,7 +20,7 @@ #include <uhd/usrp/subdev_props.hpp> #include <uhd/utils/warning.hpp> #include <uhd/utils/static.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/types/dict.hpp> #include <boost/tuple/tuple.hpp> #include <boost/format.hpp> @@ -50,7 +50,7 @@ void dboard_manager::register_dboard( ){ //std::cout << "registering: " << name << std::endl; if (get_id_to_args_map().has_key(dboard_id)){ - throw std::runtime_error(str(boost::format( + throw uhd::key_error(str(boost::format( "The dboard id %s is already registered to %s." ) % dboard_id.to_string() % dboard_id.to_pp_string())); } @@ -315,7 +315,7 @@ prop_names_t dboard_manager_impl::get_tx_subdev_names(void){ } wax::obj dboard_manager_impl::get_rx_subdev(const std::string &subdev_name){ - if (not _rx_dboards.has_key(subdev_name)) throw std::invalid_argument( + if (not _rx_dboards.has_key(subdev_name)) throw uhd::key_error( str(boost::format("Unknown rx subdev name %s") % subdev_name) ); //get a link to the rx subdev proxy @@ -323,7 +323,7 @@ wax::obj dboard_manager_impl::get_rx_subdev(const std::string &subdev_name){ } wax::obj dboard_manager_impl::get_tx_subdev(const std::string &subdev_name){ - if (not _tx_dboards.has_key(subdev_name)) throw std::invalid_argument( + if (not _tx_dboards.has_key(subdev_name)) throw uhd::key_error( str(boost::format("Unknown tx subdev name %s") % subdev_name) ); //get a link to the tx subdev proxy diff --git a/host/lib/usrp/dsp_utils.cpp b/host/lib/usrp/dsp_utils.cpp index 576c4639f..a3a557060 100644 --- a/host/lib/usrp/dsp_utils.cpp +++ b/host/lib/usrp/dsp_utils.cpp @@ -17,7 +17,7 @@ #include <uhd/usrp/dsp_utils.hpp> #include <uhd/types/dict.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <boost/assign/list_of.hpp> #include <boost/tuple/tuple.hpp> #include <boost/math/special_functions/round.hpp> @@ -44,7 +44,7 @@ boost::uint32_t dsp_type1::calc_rx_mux_word(subdev_conn_t subdev_conn){ case SUBDEV_CONN_COMPLEX_IQ: return (0x1 << 4) | (0x0 << 0); //DDC0Q=ADC0Q, DDC0I=ADC0I case SUBDEV_CONN_COMPLEX_QI: return (0x0 << 4) | (0x1 << 0); //DDC0Q=ADC0I, DDC0I=ADC0Q case SUBDEV_CONN_REAL_I: return (0xf << 4) | (0x0 << 0); //DDC0Q=ZERO, DDC0I=ADC0I - case SUBDEV_CONN_REAL_Q: return (0x1 << 4) | (0xf << 0); //DDC0Q=ADC0Q, DDC0I=ZERO + case SUBDEV_CONN_REAL_Q: return (0xf << 4) | (0x1 << 0); //DDC0Q=ZERO, DDC0I=ADC0Q default: UHD_THROW_INVALID_CODE_PATH(); } } diff --git a/host/lib/usrp/gps_ctrl.cpp b/host/lib/usrp/gps_ctrl.cpp index b1062fa39..e0ab6de90 100644 --- a/host/lib/usrp/gps_ctrl.cpp +++ b/host/lib/usrp/gps_ctrl.cpp @@ -16,11 +16,10 @@ // #include <uhd/usrp/gps_ctrl.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <boost/cstdint.hpp> -#include <string> #include <boost/date_time/posix_time/posix_time.hpp> -#include <boost/thread.hpp> +#include <boost/thread/thread.hpp> #include <boost/algorithm/string/trim.hpp> #include <boost/tokenizer.hpp> @@ -168,7 +167,7 @@ public: break; case GPS_TYPE_NONE: default: - throw std::runtime_error("get_time(): Unsupported GPS or no GPS detected\n"); + throw uhd::runtime_error("get_time(): Unsupported GPS or no GPS detected\n"); break; } return now; diff --git a/host/lib/usrp/misc_utils.cpp b/host/lib/usrp/misc_utils.cpp index 2bad83b3c..ddcad41cf 100644 --- a/host/lib/usrp/misc_utils.cpp +++ b/host/lib/usrp/misc_utils.cpp @@ -16,7 +16,7 @@ // #include <uhd/usrp/misc_utils.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/algorithm.hpp> #include <uhd/utils/gain_group.hpp> #include <uhd/usrp/dboard_eeprom.hpp> @@ -167,7 +167,7 @@ static void verify_xx_subdev_spec( BOOST_FOREACH(subdev_spec_pair_t &pair, subdev_spec){ //empty db name means select dboard automatically if (pair.db_name.empty()){ - if (dboard_names.size() != 1) throw std::runtime_error( + if (dboard_names.size() != 1) throw uhd::value_error( "A daughterboard name must be provided for multi-slot motherboards: " + subdev_spec.to_string() ); pair.db_name = dboard_names.front(); @@ -178,7 +178,7 @@ static void verify_xx_subdev_spec( //empty sd name means select the subdev automatically if (pair.sd_name.empty()){ - if (subdev_names.size() != 1) throw std::runtime_error( + if (subdev_names.size() != 1) throw uhd::value_error( "A subdevice name must be provided for multi-subdev daughterboards: " + subdev_spec.to_string() ); pair.sd_name = subdev_names.front(); @@ -186,7 +186,7 @@ static void verify_xx_subdev_spec( uhd::assert_has(subdev_names, pair.sd_name, xx_type + " subdev name"); } }catch(const std::exception &e){ - throw std::runtime_error(str(boost::format( + throw uhd::value_error(str(boost::format( "Validate %s subdev spec failed: %s\n %s" ) % xx_type % subdev_spec.to_string() % e.what())); } @@ -196,11 +196,11 @@ static void verify_xx_subdev_spec( wax::obj dboard = mboard[named_prop_t(dboard_prop, db_name)]; BOOST_FOREACH(const std::string &sd_name, dboard[DBOARD_PROP_SUBDEV_NAMES].as<prop_names_t>()){ try{ - bool enable = std::has(subdev_spec, subdev_spec_pair_t(db_name, sd_name)); + bool enable = uhd::has(subdev_spec, subdev_spec_pair_t(db_name, sd_name)); dboard[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)][SUBDEV_PROP_ENABLED] = enable; } catch(const std::exception &e){ - throw std::runtime_error(str(boost::format( + throw uhd::runtime_error(str(boost::format( "Cannot set enabled property on subdevice %s:%s\n %s" ) % db_name % sd_name % e.what())); } diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp index 73bac029d..83cbf339b 100644 --- a/host/lib/usrp/multi_usrp.cpp +++ b/host/lib/usrp/multi_usrp.cpp @@ -15,10 +15,10 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "wrapper_utils.hpp" #include <uhd/usrp/multi_usrp.hpp> #include <uhd/usrp/tune_helper.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/usrp/mboard_iface.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/warning.hpp> #include <uhd/utils/gain_group.hpp> #include <uhd/usrp/subdev_props.hpp> @@ -29,8 +29,8 @@ #include <boost/thread.hpp> #include <boost/foreach.hpp> #include <boost/format.hpp> -#include <stdexcept> #include <iostream> +#include <cmath> using namespace uhd; using namespace uhd::usrp; @@ -38,7 +38,48 @@ using namespace uhd::usrp; const std::string multi_usrp::ALL_GAINS = ""; /*********************************************************************** - * Simple USRP Implementation + * Helper methods + **********************************************************************/ +static inline uhd::freq_range_t add_dsp_shift( + const uhd::freq_range_t &range, + wax::obj dsp +){ + double codec_rate = dsp[uhd::usrp::DSP_PROP_CODEC_RATE].as<double>(); + return uhd::freq_range_t(range.start() - codec_rate/2.0, range.stop() + codec_rate/2.0); +} + +static inline void do_samp_rate_warning_message( + double target_rate, + double actual_rate, + const std::string &xx +){ + static const double max_allowed_error = 1.0; //Sps + if (std::abs(target_rate - actual_rate) > max_allowed_error){ + uhd::warning::post(str(boost::format( + "The hardware does not support the requested %s sample rate:\n" + "Target sample rate: %f MSps\n" + "Actual sample rate: %f MSps\n" + ) % xx % (target_rate/1e6) % (actual_rate/1e6))); + } +} + +static inline void do_tune_freq_warning_message( + double target_freq, + double actual_freq, + const std::string &xx +){ + static const double max_allowed_error = 1.0; //Hz + if (std::abs(target_freq - actual_freq) > max_allowed_error){ + uhd::warning::post(str(boost::format( + "The hardware does not support the requested %s frequency:\n" + "Target frequency: %f MHz\n" + "Actual frequency: %f MHz\n" + ) % xx % (target_freq/1e6) % (actual_freq/1e6))); + } +} + +/*********************************************************************** + * Multi USRP Implementation **********************************************************************/ class multi_usrp_impl : public multi_usrp{ public: @@ -85,17 +126,14 @@ public: //----------- rx side of life ---------------------------------- for (size_t m = 0, chan = 0; m < get_num_mboards(); m++){ - buff += str(boost::format( - " RX DSP %d: %s\n" - ) % m - % _rx_dsp(m)[DSP_PROP_NAME].as<std::string>() - ); for (; chan < (m + 1)*get_rx_subdev_spec(m).size(); chan++){ buff += str(boost::format( " RX Channel: %u\n" + " RX DSP: %s\n" " RX Dboard: %s\n" " RX Subdev: %s\n" ) % chan + % _rx_dsp(chan)[DSP_PROP_NAME].as<std::string>() % _rx_dboard(chan)[DBOARD_PROP_NAME].as<std::string>() % _rx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>() ); @@ -104,17 +142,14 @@ public: //----------- tx side of life ---------------------------------- for (size_t m = 0, chan = 0; m < get_num_mboards(); m++){ - buff += str(boost::format( - " TX DSP %d: %s\n" - ) % m - % _tx_dsp(m)[DSP_PROP_NAME].as<std::string>() - ); for (; chan < (m + 1)*get_tx_subdev_spec(m).size(); chan++){ buff += str(boost::format( " TX Channel: %u\n" + " TX DSP: %s\n" " TX Dboard: %s\n" " TX Subdev: %s\n" ) % chan + % _tx_dsp(chan)[DSP_PROP_NAME].as<std::string>() % _tx_dboard(chan)[DBOARD_PROP_NAME].as<std::string>() % _tx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>() ); @@ -159,7 +194,7 @@ public: while(true){ if (get_time_last_pps() != time_start_last_pps) break; if ((get_time_now() - time_start) > time_spec_t(1.1)){ - throw std::runtime_error( + throw uhd::runtime_error( "Board 0 may not be getting a PPS signal!\n" "No PPS detected within the time interval.\n" "See the application notes for your device.\n" @@ -194,9 +229,13 @@ public: return true; } - void issue_stream_cmd(const stream_cmd_t &stream_cmd){ - for (size_t m = 0; m < get_num_mboards(); m++){ - _mboard(m)[MBOARD_PROP_STREAM_CMD] = stream_cmd; + void issue_stream_cmd(const stream_cmd_t &stream_cmd, size_t chan){ + if (chan != ALL_CHANS){ + _rx_dsp(chan)[DSP_PROP_STREAM_CMD] = stream_cmd; + return; + } + for (size_t c = 0; c < get_rx_num_channels(); c++){ + issue_stream_cmd(stream_cmd, c); } } @@ -221,6 +260,10 @@ public: std::vector<std::string> get_mboard_sensor_names(size_t mboard){ return _mboard(mboard)[MBOARD_PROP_SENSOR_NAMES].as<prop_names_t>(); } + + mboard_iface::sptr get_mboard_iface(size_t mboard){ + return _mboard(mboard)[MBOARD_PROP_IFACE].as<mboard_iface::sptr>(); + } /******************************************************************* * RX methods @@ -240,36 +283,44 @@ public: } size_t get_rx_num_channels(void){ - return rx_cpm()*get_num_mboards(); //total num channels + size_t sum = 0; + for (size_t m = 0; m < get_num_mboards(); m++){ + sum += get_rx_subdev_spec(m).size(); + } + return sum; } std::string get_rx_subdev_name(size_t chan){ return _rx_subdev(chan)[SUBDEV_PROP_NAME].as<std::string>(); } - void set_rx_rate(double rate){ - for (size_t m = 0; m < get_num_mboards(); m++){ - _rx_dsp(m)[DSP_PROP_HOST_RATE] = rate; + void set_rx_rate(double rate, size_t chan){ + if (chan != ALL_CHANS){ + _rx_dsp(chan)[DSP_PROP_HOST_RATE] = rate; + do_samp_rate_warning_message(rate, get_rx_rate(chan), "RX"); + return; + } + for (size_t c = 0; c < get_rx_num_channels(); c++){ + set_rx_rate(rate, c); } - do_samp_rate_warning_message(rate, get_rx_rate(), "RX"); } - double get_rx_rate(void){ - return _rx_dsp(0)[DSP_PROP_HOST_RATE].as<double>(); + double get_rx_rate(size_t chan){ + return _rx_dsp(chan)[DSP_PROP_HOST_RATE].as<double>(); } tune_result_t set_rx_freq(const tune_request_t &tune_request, size_t chan){ - tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan/rx_cpm()), chan%rx_cpm(), tune_request); + tune_result_t r = tune_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan), tune_request); do_tune_freq_warning_message(tune_request.target_freq, get_rx_freq(chan), "RX"); return r; } double get_rx_freq(size_t chan){ - return derive_freq_from_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan/rx_cpm()), chan%rx_cpm()); + return derive_freq_from_rx_subdev_and_dsp(_rx_subdev(chan), _rx_dsp(chan)); } freq_range_t get_rx_freq_range(size_t chan){ - return add_dsp_shift(_rx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _rx_dsp(chan/rx_cpm())); + return add_dsp_shift(_rx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _rx_dsp(chan)); } void set_rx_gain(double gain, const std::string &name, size_t chan){ @@ -342,32 +393,40 @@ public: } size_t get_tx_num_channels(void){ - return tx_cpm()*get_num_mboards(); //total num channels + size_t sum = 0; + for (size_t m = 0; m < get_num_mboards(); m++){ + sum += get_tx_subdev_spec(m).size(); + } + return sum; } - void set_tx_rate(double rate){ - for (size_t m = 0; m < get_num_mboards(); m++){ - _tx_dsp(m)[DSP_PROP_HOST_RATE] = rate; + void set_tx_rate(double rate, size_t chan){ + if (chan != ALL_CHANS){ + _tx_dsp(chan)[DSP_PROP_HOST_RATE] = rate; + do_samp_rate_warning_message(rate, get_tx_rate(chan), "TX"); + return; + } + for (size_t c = 0; c < get_tx_num_channels(); c++){ + set_tx_rate(rate, c); } - do_samp_rate_warning_message(rate, get_tx_rate(), "TX"); } - double get_tx_rate(void){ - return _tx_dsp(0)[DSP_PROP_HOST_RATE].as<double>(); + double get_tx_rate(size_t chan){ + return _tx_dsp(chan)[DSP_PROP_HOST_RATE].as<double>(); } tune_result_t set_tx_freq(const tune_request_t &tune_request, size_t chan){ - tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan/tx_cpm()), chan%tx_cpm(), tune_request); + tune_result_t r = tune_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan), tune_request); do_tune_freq_warning_message(tune_request.target_freq, get_tx_freq(chan), "TX"); return r; } double get_tx_freq(size_t chan){ - return derive_freq_from_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan/tx_cpm()), chan%tx_cpm()); + return derive_freq_from_tx_subdev_and_dsp(_tx_subdev(chan), _tx_dsp(chan)); } freq_range_t get_tx_freq_range(size_t chan){ - return add_dsp_shift(_tx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _tx_dsp(chan/tx_cpm())); + return add_dsp_shift(_tx_subdev(chan)[SUBDEV_PROP_FREQ_RANGE].as<freq_range_t>(), _tx_dsp(chan)); } void set_tx_gain(double gain, const std::string &name, size_t chan){ @@ -421,58 +480,75 @@ public: private: device::sptr _dev; - size_t rx_cpm(void){ //channels per mboard - size_t nchan = get_rx_subdev_spec(0).size(); - for (size_t m = 1; m < get_num_mboards(); m++){ - if (nchan != get_rx_subdev_spec(m).size()){ - throw std::runtime_error("rx subdev spec size inconsistent across all mboards"); - } + struct mboard_chan_pair{ + size_t mboard, chan; + mboard_chan_pair(void): mboard(0), chan(0){} + }; + + mboard_chan_pair rx_chan_to_mcp(size_t chan){ + mboard_chan_pair mcp; + mcp.chan = chan; + for (mcp.mboard = 0; mcp.mboard < get_num_mboards(); mcp.mboard++){ + size_t sss = get_rx_subdev_spec(mcp.mboard).size(); + if (mcp.chan < sss) break; + mcp.chan -= sss; } - return nchan; + return mcp; } - size_t tx_cpm(void){ //channels per mboard - size_t nchan = get_tx_subdev_spec(0).size(); - for (size_t m = 1; m < get_num_mboards(); m++){ - if (nchan != get_tx_subdev_spec(m).size()){ - throw std::runtime_error("tx subdev spec size inconsistent across all mboards"); - } + mboard_chan_pair tx_chan_to_mcp(size_t chan){ + mboard_chan_pair mcp; + mcp.chan = chan; + for (mcp.mboard = 0; mcp.mboard < get_num_mboards(); mcp.mboard++){ + size_t sss = get_tx_subdev_spec(mcp.mboard).size(); + if (mcp.chan < sss) break; + mcp.chan -= sss; } - return nchan; + return mcp; } wax::obj _mboard(size_t mboard){ std::string mb_name = (*_dev)[DEVICE_PROP_MBOARD_NAMES].as<prop_names_t>().at(mboard); return (*_dev)[named_prop_t(DEVICE_PROP_MBOARD, mb_name)]; } - wax::obj _rx_dsp(size_t mboard){ - return _mboard(mboard)[MBOARD_PROP_RX_DSP]; + wax::obj _rx_dsp(size_t chan){ + mboard_chan_pair mcp = rx_chan_to_mcp(chan); + prop_names_t dsp_names = _mboard(mcp.mboard)[MBOARD_PROP_RX_DSP_NAMES].as<prop_names_t>(); + return _mboard(mcp.mboard)[named_prop_t(MBOARD_PROP_RX_DSP, dsp_names.at(mcp.chan))]; } - wax::obj _tx_dsp(size_t mboard){ - return _mboard(mboard)[MBOARD_PROP_TX_DSP]; + wax::obj _tx_dsp(size_t chan){ + mboard_chan_pair mcp = tx_chan_to_mcp(chan); + prop_names_t dsp_names = _mboard(mcp.mboard)[MBOARD_PROP_TX_DSP_NAMES].as<prop_names_t>(); + return _mboard(mcp.mboard)[named_prop_t(MBOARD_PROP_TX_DSP, dsp_names.at(mcp.chan))]; } wax::obj _rx_dboard(size_t chan){ - std::string db_name = get_rx_subdev_spec(chan/rx_cpm()).at(chan%rx_cpm()).db_name; - return _mboard(chan/rx_cpm())[named_prop_t(MBOARD_PROP_RX_DBOARD, db_name)]; + mboard_chan_pair mcp = rx_chan_to_mcp(chan); + std::string db_name = get_rx_subdev_spec(mcp.mboard).at(mcp.chan).db_name; + return _mboard(mcp.mboard)[named_prop_t(MBOARD_PROP_RX_DBOARD, db_name)]; } wax::obj _tx_dboard(size_t chan){ - std::string db_name = get_tx_subdev_spec(chan/tx_cpm()).at(chan%tx_cpm()).db_name; - return _mboard(chan/tx_cpm())[named_prop_t(MBOARD_PROP_TX_DBOARD, db_name)]; + mboard_chan_pair mcp = tx_chan_to_mcp(chan); + std::string db_name = get_tx_subdev_spec(mcp.mboard).at(mcp.chan).db_name; + return _mboard(mcp.mboard)[named_prop_t(MBOARD_PROP_TX_DBOARD, db_name)]; } wax::obj _rx_subdev(size_t chan){ - std::string sd_name = get_rx_subdev_spec(chan/rx_cpm()).at(chan%rx_cpm()).sd_name; + mboard_chan_pair mcp = rx_chan_to_mcp(chan); + std::string sd_name = get_rx_subdev_spec(mcp.mboard).at(mcp.chan).sd_name; return _rx_dboard(chan)[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)]; } wax::obj _tx_subdev(size_t chan){ - std::string sd_name = get_tx_subdev_spec(chan/tx_cpm()).at(chan%tx_cpm()).sd_name; + mboard_chan_pair mcp = tx_chan_to_mcp(chan); + std::string sd_name = get_tx_subdev_spec(mcp.mboard).at(mcp.chan).sd_name; return _tx_dboard(chan)[named_prop_t(DBOARD_PROP_SUBDEV, sd_name)]; } gain_group::sptr _rx_gain_group(size_t chan){ - std::string sd_name = get_rx_subdev_spec(chan/rx_cpm()).at(chan%rx_cpm()).sd_name; + mboard_chan_pair mcp = rx_chan_to_mcp(chan); + std::string sd_name = get_rx_subdev_spec(mcp.mboard).at(mcp.chan).sd_name; return _rx_dboard(chan)[named_prop_t(DBOARD_PROP_GAIN_GROUP, sd_name)].as<gain_group::sptr>(); } gain_group::sptr _tx_gain_group(size_t chan){ - std::string sd_name = get_tx_subdev_spec(chan/tx_cpm()).at(chan%tx_cpm()).sd_name; + mboard_chan_pair mcp = tx_chan_to_mcp(chan); + std::string sd_name = get_tx_subdev_spec(mcp.mboard).at(mcp.chan).sd_name; return _tx_dboard(chan)[named_prop_t(DBOARD_PROP_GAIN_GROUP, sd_name)].as<gain_group::sptr>(); } }; diff --git a/host/lib/usrp/subdev_spec.cpp b/host/lib/usrp/subdev_spec.cpp index d5d950f1f..6912afec8 100644 --- a/host/lib/usrp/subdev_spec.cpp +++ b/host/lib/usrp/subdev_spec.cpp @@ -16,11 +16,11 @@ // #include <uhd/usrp/subdev_spec.hpp> +#include <uhd/exception.hpp> #include <boost/algorithm/string.hpp> //for split #include <boost/tokenizer.hpp> #include <boost/format.hpp> #include <boost/foreach.hpp> -#include <stdexcept> #include <sstream> #include <vector> @@ -51,7 +51,7 @@ subdev_spec_t::subdev_spec_t(const std::string &markup){ switch(db_sd.size()){ case 1: this->push_back(subdev_spec_pair_t("", db_sd.front())); break; case 2: this->push_back(subdev_spec_pair_t(db_sd.front(), db_sd.back())); break; - default: throw std::runtime_error("invalid subdev-spec markup string: "+markup); + default: throw uhd::value_error("invalid subdev-spec markup string: "+markup); } } } diff --git a/host/lib/usrp/tune_helper.cpp b/host/lib/usrp/tune_helper.cpp index eccee7f4b..ced80c187 100644 --- a/host/lib/usrp/tune_helper.cpp +++ b/host/lib/usrp/tune_helper.cpp @@ -30,12 +30,11 @@ using namespace uhd::usrp; **********************************************************************/ static tune_result_t tune_xx_subdev_and_dsp( dboard_iface::unit_t unit, - wax::obj subdev, wax::obj dsp, size_t chan, + wax::obj subdev, wax::obj dsp, const tune_request_t &tune_request ){ wax::obj subdev_freq_proxy = subdev[SUBDEV_PROP_FREQ]; - std::string freq_name = dsp[DSP_PROP_FREQ_SHIFT_NAMES].as<prop_names_t>().at(chan); - wax::obj dsp_freq_proxy = dsp[named_prop_t(DSP_PROP_FREQ_SHIFT, freq_name)]; + wax::obj dsp_freq_proxy = dsp[DSP_PROP_FREQ_SHIFT]; //------------------------------------------------------------------ //-- calculate the LO offset, only used with automatic policy @@ -105,13 +104,11 @@ static tune_result_t tune_xx_subdev_and_dsp( } static double derive_freq_from_xx_subdev_and_dsp( - dboard_iface::unit_t unit, - wax::obj subdev, wax::obj dsp, size_t chan + dboard_iface::unit_t unit, wax::obj subdev, wax::obj dsp ){ //extract actual dsp and IF frequencies double actual_inter_freq = subdev[SUBDEV_PROP_FREQ].as<double>(); - std::string freq_name = dsp[DSP_PROP_FREQ_SHIFT_NAMES].as<prop_names_t>().at(chan); - double actual_dsp_freq = dsp[named_prop_t(DSP_PROP_FREQ_SHIFT, freq_name)].as<double>(); + double actual_dsp_freq = dsp[DSP_PROP_FREQ_SHIFT].as<double>(); //invert the sign on the dsp freq given the following conditions if (unit == dboard_iface::UNIT_TX) actual_dsp_freq *= -1.0; @@ -123,30 +120,28 @@ static double derive_freq_from_xx_subdev_and_dsp( * RX Tune **********************************************************************/ tune_result_t usrp::tune_rx_subdev_and_dsp( - wax::obj subdev, wax::obj ddc, size_t chan, - const tune_request_t &tune_request + wax::obj subdev, wax::obj ddc, const tune_request_t &tune_request ){ - return tune_xx_subdev_and_dsp(dboard_iface::UNIT_RX, subdev, ddc, chan, tune_request); + return tune_xx_subdev_and_dsp(dboard_iface::UNIT_RX, subdev, ddc, tune_request); } double usrp::derive_freq_from_rx_subdev_and_dsp( - wax::obj subdev, wax::obj ddc, size_t chan + wax::obj subdev, wax::obj ddc ){ - return derive_freq_from_xx_subdev_and_dsp(dboard_iface::UNIT_RX, subdev, ddc, chan); + return derive_freq_from_xx_subdev_and_dsp(dboard_iface::UNIT_RX, subdev, ddc); } /*********************************************************************** * TX Tune **********************************************************************/ tune_result_t usrp::tune_tx_subdev_and_dsp( - wax::obj subdev, wax::obj duc, size_t chan, - const tune_request_t &tune_request + wax::obj subdev, wax::obj duc, const tune_request_t &tune_request ){ - return tune_xx_subdev_and_dsp(dboard_iface::UNIT_TX, subdev, duc, chan, tune_request); + return tune_xx_subdev_and_dsp(dboard_iface::UNIT_TX, subdev, duc, tune_request); } double usrp::derive_freq_from_tx_subdev_and_dsp( - wax::obj subdev, wax::obj duc, size_t chan + wax::obj subdev, wax::obj duc ){ - return derive_freq_from_xx_subdev_and_dsp(dboard_iface::UNIT_TX, subdev, duc, chan); + return derive_freq_from_xx_subdev_and_dsp(dboard_iface::UNIT_TX, subdev, duc); } diff --git a/host/lib/usrp/usrp1/clock_ctrl.cpp b/host/lib/usrp/usrp1/clock_ctrl.cpp index 156f2b0c4..df5353b54 100644 --- a/host/lib/usrp/usrp1/clock_ctrl.cpp +++ b/host/lib/usrp/usrp1/clock_ctrl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,13 +16,6 @@ // #include "clock_ctrl.hpp" -#include "fpga_regs_standard.h" -#include <uhd/utils/assert.hpp> -#include <boost/cstdint.hpp> -#include <boost/assign/list_of.hpp> -#include <boost/foreach.hpp> -#include <utility> -#include <iostream> using namespace uhd; diff --git a/host/lib/usrp/usrp1/codec_ctrl.cpp b/host/lib/usrp/usrp1/codec_ctrl.cpp index f3816b377..1b4411002 100644 --- a/host/lib/usrp/usrp1/codec_ctrl.cpp +++ b/host/lib/usrp/usrp1/codec_ctrl.cpp @@ -20,7 +20,7 @@ #include "clock_ctrl.hpp" #include "ad9862_regs.hpp" #include <uhd/types/dict.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/algorithm.hpp> #include <uhd/utils/byteswap.hpp> #include <boost/cstdint.hpp> @@ -162,7 +162,7 @@ static const int mtpgw = 255; //maximum tx pga gain word void usrp1_codec_ctrl_impl::set_tx_pga_gain(double gain){ int gain_word = int(mtpgw*(gain - tx_pga_gain_range.start())/(tx_pga_gain_range.stop() - tx_pga_gain_range.start())); - _ad9862_regs.tx_pga_gain = std::clip(gain_word, 0, mtpgw); + _ad9862_regs.tx_pga_gain = uhd::clip(gain_word, 0, mtpgw); this->send_reg(16); } @@ -174,7 +174,7 @@ static const int mrpgw = 0x14; //maximum rx pga gain word void usrp1_codec_ctrl_impl::set_rx_pga_gain(double gain, char which){ int gain_word = int(mrpgw*(gain - rx_pga_gain_range.start())/(rx_pga_gain_range.stop() - rx_pga_gain_range.start())); - gain_word = std::clip(gain_word, 0, mrpgw); + gain_word = uhd::clip(gain_word, 0, mrpgw); switch(which){ case 'A': _ad9862_regs.rx_pga_a = gain_word; @@ -264,7 +264,7 @@ void usrp1_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts) { //special case for aux dac d (aka sigma delta word) if (which == AUX_DAC_D) { - boost::uint16_t dac_word = std::clip(boost::math::iround(volts*0xfff/3.3), 0, 0xfff); + boost::uint16_t dac_word = uhd::clip(boost::math::iround(volts*0xfff/3.3), 0, 0xfff); _ad9862_regs.sig_delt_11_4 = boost::uint8_t(dac_word >> 4); _ad9862_regs.sig_delt_3_0 = boost::uint8_t(dac_word & 0xf); this->send_reg(42); @@ -273,7 +273,7 @@ void usrp1_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts) } //calculate the dac word for aux dac a, b, c - boost::uint8_t dac_word = std::clip(boost::math::iround(volts*0xff/3.3), 0, 0xff); + boost::uint8_t dac_word = uhd::clip(boost::math::iround(volts*0xff/3.3), 0, 0xff); //setup a lookup table for the aux dac params (reg ref, reg addr) typedef boost::tuple<boost::uint8_t*, boost::uint8_t> dac_params_t; @@ -303,8 +303,8 @@ void usrp1_codec_ctrl_impl::send_reg(boost::uint8_t addr) std::cout << "codec control write reg: 0x"; std::cout << std::setw(8) << std::hex << reg << std::endl; } - _iface->transact_spi(_spi_slave, - spi_config_t::EDGE_RISE, reg, 16, false); + _iface->write_spi(_spi_slave, + spi_config_t::EDGE_RISE, reg, 16); } void usrp1_codec_ctrl_impl::recv_reg(boost::uint8_t addr) @@ -317,8 +317,8 @@ void usrp1_codec_ctrl_impl::recv_reg(boost::uint8_t addr) std::cout << std::setw(8) << std::hex << reg << std::endl; } - boost::uint32_t ret = _iface->transact_spi(_spi_slave, - spi_config_t::EDGE_RISE, reg, 16, true); + boost::uint32_t ret = _iface->read_spi(_spi_slave, + spi_config_t::EDGE_RISE, reg, 16); if (codec_debug) { std::cout.fill('0'); diff --git a/host/lib/usrp/usrp1/codec_impl.cpp b/host/lib/usrp/usrp1/codec_impl.cpp index 14ecd2d2e..7e4032131 100644 --- a/host/lib/usrp/usrp1/codec_impl.cpp +++ b/host/lib/usrp/usrp1/codec_impl.cpp @@ -16,7 +16,7 @@ // #include "usrp1_impl.hpp" -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/usrp/codec_props.hpp> #include <boost/bind.hpp> #include <boost/foreach.hpp> diff --git a/host/lib/usrp/usrp1/dboard_iface.cpp b/host/lib/usrp/usrp1/dboard_iface.cpp index eec4a52db..3f3a98b7a 100644 --- a/host/lib/usrp/usrp1/dboard_iface.cpp +++ b/host/lib/usrp/usrp1/dboard_iface.cpp @@ -24,7 +24,7 @@ #include "codec_ctrl.hpp" #include <uhd/usrp/dboard_iface.hpp> #include <uhd/types/dict.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <boost/assign/list_of.hpp> #include <iostream> @@ -329,7 +329,7 @@ static boost::uint32_t unit_to_otw_spi_dev(dboard_iface::unit_t unit, else break; } - throw std::invalid_argument("unknown unit type"); + UHD_THROW_INVALID_CODE_PATH(); } void usrp1_dboard_iface::write_spi(unit_t unit, @@ -337,8 +337,8 @@ void usrp1_dboard_iface::write_spi(unit_t unit, boost::uint32_t data, size_t num_bits) { - _iface->transact_spi(unit_to_otw_spi_dev(unit, _dboard_slot), - config, data, num_bits, false); + _iface->write_spi(unit_to_otw_spi_dev(unit, _dboard_slot), + config, data, num_bits); } boost::uint32_t usrp1_dboard_iface::read_write_spi(unit_t unit, @@ -346,8 +346,8 @@ boost::uint32_t usrp1_dboard_iface::read_write_spi(unit_t unit, boost::uint32_t data, size_t num_bits) { - return _iface->transact_spi(unit_to_otw_spi_dev(unit, _dboard_slot), - config, data, num_bits, true); + return _iface->read_spi(unit_to_otw_spi_dev(unit, _dboard_slot), + config, data, num_bits); } /*********************************************************************** diff --git a/host/lib/usrp/usrp1/dboard_impl.cpp b/host/lib/usrp/usrp1/dboard_impl.cpp index 2130960fb..02906fc45 100644 --- a/host/lib/usrp/usrp1/dboard_impl.cpp +++ b/host/lib/usrp/usrp1/dboard_impl.cpp @@ -19,7 +19,7 @@ #include "usrp_i2c_addr.h" #include <uhd/usrp/dsp_utils.hpp> #include <uhd/usrp/misc_utils.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/usrp/dboard_props.hpp> #include <uhd/usrp/subdev_props.hpp> #include <boost/bind.hpp> diff --git a/host/lib/usrp/usrp1/dsp_impl.cpp b/host/lib/usrp/usrp1/dsp_impl.cpp index 370f4831f..8152c4e34 100644 --- a/host/lib/usrp/usrp1/dsp_impl.cpp +++ b/host/lib/usrp/usrp1/dsp_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -34,23 +34,25 @@ using namespace uhd::usrp; **********************************************************************/ void usrp1_impl::rx_dsp_init(void) { - _rx_dsp_proxy = wax_obj_proxy::make( - boost::bind(&usrp1_impl::rx_dsp_get, this, _1, _2), - boost::bind(&usrp1_impl::rx_dsp_set, this, _1, _2)); - - rx_dsp_set(DSP_PROP_HOST_RATE, _clock_ctrl->get_master_clock_freq() / 16); + for (size_t i = 0; i < this->get_num_ddcs(); i++){ + _rx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&usrp1_impl::rx_dsp_get, this, _1, _2, i), + boost::bind(&usrp1_impl::rx_dsp_set, this, _1, _2, i) + ); + rx_dsp_set(DSP_PROP_HOST_RATE, _clock_ctrl->get_master_clock_freq() / 16, i); + } } /*********************************************************************** * RX DDC Get **********************************************************************/ -void usrp1_impl::rx_dsp_get(const wax::obj &key_, wax::obj &val){ +void usrp1_impl::rx_dsp_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()){ case DSP_PROP_NAME: - val = str(boost::format("usrp1 ddc %uX %s") - % this->get_num_ddcs() + val = str(boost::format("usrp1 ddc%d %s") + % which_dsp % (this->has_rx_halfband()? "+ hb" : "") ); return; @@ -60,16 +62,7 @@ void usrp1_impl::rx_dsp_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_FREQ_SHIFT: - val = _rx_dsp_freqs[key.name]; - return; - - case DSP_PROP_FREQ_SHIFT_NAMES:{ - prop_names_t names; - for(size_t i = 0; i < this->get_num_ddcs(); i++){ - names.push_back(boost::lexical_cast<std::string>(i)); - } - val = names; - } + val = _rx_dsp_freqs[which_dsp]; return; case DSP_PROP_CODEC_RATE: @@ -88,7 +81,7 @@ void usrp1_impl::rx_dsp_get(const wax::obj &key_, wax::obj &val){ /*********************************************************************** * RX DDC Set **********************************************************************/ -void usrp1_impl::rx_dsp_set(const wax::obj &key_, const wax::obj &val){ +void usrp1_impl::rx_dsp_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()) { @@ -97,16 +90,17 @@ void usrp1_impl::rx_dsp_set(const wax::obj &key_, const wax::obj &val){ boost::uint32_t reg_word = dsp_type1::calc_cordic_word_and_update( new_freq, _clock_ctrl->get_master_clock_freq()); - static const uhd::dict<std::string, boost::uint32_t> - freq_name_to_reg_val = boost::assign::map_list_of - ("0", FR_RX_FREQ_0) ("1", FR_RX_FREQ_1) - ("2", FR_RX_FREQ_2) ("3", FR_RX_FREQ_3) - ; - _iface->poke32(freq_name_to_reg_val[key.name], ~reg_word + 1); - _rx_dsp_freqs[key.name] = new_freq; + static const boost::uint32_t dsp_index_to_reg_val[4] = { + FR_RX_FREQ_0, FR_RX_FREQ_1, FR_RX_FREQ_2, FR_RX_FREQ_3 + }; + _iface->poke32(dsp_index_to_reg_val[which_dsp], ~reg_word + 1); + _rx_dsp_freqs[which_dsp] = new_freq; return; } - case DSP_PROP_HOST_RATE: { + + case DSP_PROP_HOST_RATE: + if (which_dsp != 0) return; //only for dsp[0] as this is vectorized + { size_t rate = size_t(_clock_ctrl->get_master_clock_freq() / val.as<double>()); if ((rate & 0x01) || (rate < 4) || (rate > 256)) { @@ -123,6 +117,11 @@ void usrp1_impl::rx_dsp_set(const wax::obj &key_, const wax::obj &val){ } return; + case DSP_PROP_STREAM_CMD: + if (which_dsp != 0) return; //only for dsp[0] as this is vectorized + _soft_time_ctrl->issue_stream_cmd(val.as<stream_cmd_t>()); + return; + default: UHD_THROW_PROP_SET_ERROR(); } @@ -133,24 +132,25 @@ void usrp1_impl::rx_dsp_set(const wax::obj &key_, const wax::obj &val){ **********************************************************************/ void usrp1_impl::tx_dsp_init(void) { - _tx_dsp_proxy = wax_obj_proxy::make( - boost::bind(&usrp1_impl::tx_dsp_get, this, _1, _2), - boost::bind(&usrp1_impl::tx_dsp_set, this, _1, _2)); - - //initial config and update - tx_dsp_set(DSP_PROP_HOST_RATE, _clock_ctrl->get_master_clock_freq() * 2 / 16); + for (size_t i = 0; i < this->get_num_ducs(); i++){ + _tx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&usrp1_impl::tx_dsp_get, this, _1, _2, i), + boost::bind(&usrp1_impl::tx_dsp_set, this, _1, _2, i) + ); + tx_dsp_set(DSP_PROP_HOST_RATE, _clock_ctrl->get_master_clock_freq() / 16, i); + } } /*********************************************************************** * TX DUC Get **********************************************************************/ -void usrp1_impl::tx_dsp_get(const wax::obj &key_, wax::obj &val){ +void usrp1_impl::tx_dsp_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()) { case DSP_PROP_NAME: - val = str(boost::format("usrp1 duc %uX %s") - % this->get_num_ducs() + val = str(boost::format("usrp1 duc%d %s") + % which_dsp % (this->has_tx_halfband()? "+ hb" : "") ); return; @@ -160,16 +160,7 @@ void usrp1_impl::tx_dsp_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_FREQ_SHIFT: - val = _tx_dsp_freqs[key.name]; - return; - - case DSP_PROP_FREQ_SHIFT_NAMES:{ - prop_names_t names; - for(size_t i = 0; i < this->get_num_ducs(); i++){ - names.push_back(boost::lexical_cast<std::string>(i)); - } - val = names; - } + val = _tx_dsp_freqs[which_dsp]; return; case DSP_PROP_CODEC_RATE: @@ -188,7 +179,7 @@ void usrp1_impl::tx_dsp_get(const wax::obj &key_, wax::obj &val){ /*********************************************************************** * TX DUC Set **********************************************************************/ -void usrp1_impl::tx_dsp_set(const wax::obj &key_, const wax::obj &val){ +void usrp1_impl::tx_dsp_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()) { @@ -197,15 +188,17 @@ void usrp1_impl::tx_dsp_set(const wax::obj &key_, const wax::obj &val){ double new_freq = val.as<double>(); //map the freq shift key to a subdev spec to a particular codec chip - std::string db_name = _tx_subdev_spec.at(boost::lexical_cast<size_t>(key.name)).db_name; + std::string db_name = _tx_subdev_spec.at(which_dsp).db_name; if (db_name == "A") _codec_ctrls[DBOARD_SLOT_A]->set_duc_freq(new_freq); if (db_name == "B") _codec_ctrls[DBOARD_SLOT_B]->set_duc_freq(new_freq); - _tx_dsp_freqs[key.name] = new_freq; + _tx_dsp_freqs[which_dsp] = new_freq; return; } - case DSP_PROP_HOST_RATE: { + case DSP_PROP_HOST_RATE: + if (which_dsp != 0) return; //only for dsp[0] as this is vectorized + { size_t rate = size_t(_clock_ctrl->get_master_clock_freq() * 2 / val.as<double>()); if ((rate & 0x01) || (rate < 8) || (rate > 512)) { diff --git a/host/lib/usrp/usrp1/io_impl.cpp b/host/lib/usrp/usrp1/io_impl.cpp index 8beeccf8f..b3268298e 100644 --- a/host/lib/usrp/usrp1/io_impl.cpp +++ b/host/lib/usrp/usrp1/io_impl.cpp @@ -18,6 +18,7 @@ #include "../../transport/vrt_packet_handler.hpp" #include "usrp_commands.h" #include "usrp1_impl.hpp" +#include <uhd/utils/safe_call.hpp> #include <uhd/utils/thread_priority.hpp> #include <uhd/transport/bounded_buffer.hpp> #include <boost/bind.hpp> @@ -114,7 +115,7 @@ struct usrp1_impl::io_impl{ } ~io_impl(void){ - flush_send_buff(); + UHD_SAFE_CALL(flush_send_buff();) } zero_copy_if::sptr data_transport; diff --git a/host/lib/usrp/usrp1/mboard_impl.cpp b/host/lib/usrp/usrp1/mboard_impl.cpp index 6d5bf466d..4e2fad6e5 100644 --- a/host/lib/usrp/usrp1/mboard_impl.cpp +++ b/host/lib/usrp/usrp1/mboard_impl.cpp @@ -25,7 +25,7 @@ #include <uhd/usrp/dboard_props.hpp> #include <uhd/usrp/subdev_props.hpp> #include <uhd/utils/warning.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/utils/images.hpp> #include <boost/assign/list_of.hpp> #include <boost/foreach.hpp> @@ -161,7 +161,7 @@ static boost::uint32_t calc_tx_mux( //sanity check, only 1 channel per slot slot_to_chan_count[pair.db_name]++; if (slot_to_chan_count[pair.db_name] > 1){ - throw std::runtime_error(str(boost::format( + throw uhd::value_error(str(boost::format( "dboard slot %s assigned to multiple channels in subdev spec %s" ) % pair.db_name % subdev_spec.to_string())); } @@ -280,21 +280,19 @@ void usrp1_impl::mboard_get(const wax::obj &key_, wax::obj &val) return; case MBOARD_PROP_RX_DSP: - UHD_ASSERT_THROW(key.name == ""); - val = _rx_dsp_proxy->get_link(); + val = _rx_dsp_proxies.get(key.name)->get_link(); return; case MBOARD_PROP_RX_DSP_NAMES: - val = prop_names_t(1, ""); + val = _rx_dsp_proxies.keys(); return; case MBOARD_PROP_TX_DSP: - UHD_ASSERT_THROW(key.name == ""); - val = _tx_dsp_proxy->get_link(); + val = _tx_dsp_proxies.get(key.name)->get_link(); return; case MBOARD_PROP_TX_DSP_NAMES: - val = prop_names_t(1, ""); + val = _tx_dsp_proxies.keys(); return; case MBOARD_PROP_CLOCK_CONFIG: @@ -342,14 +340,10 @@ void usrp1_impl::mboard_set(const wax::obj &key, const wax::obj &val) //handle the get request conditioned on the key switch(key.as<mboard_prop_t>()){ - case MBOARD_PROP_STREAM_CMD: - _soft_time_ctrl->issue_stream_cmd(val.as<stream_cmd_t>()); - return; - case MBOARD_PROP_RX_SUBDEV_SPEC: _rx_subdev_spec = val.as<subdev_spec_t>(); if (_rx_subdev_spec.size() > this->get_num_ddcs()){ - throw std::runtime_error(str(boost::format( + throw uhd::value_error(str(boost::format( "USRP1 suports up to %u RX channels.\n" "However, this RX subdev spec requires %u channels\n" ) % this->get_num_ddcs() % _rx_subdev_spec.size())); @@ -362,7 +356,7 @@ void usrp1_impl::mboard_set(const wax::obj &key, const wax::obj &val) case MBOARD_PROP_TX_SUBDEV_SPEC: _tx_subdev_spec = val.as<subdev_spec_t>(); if (_tx_subdev_spec.size() > this->get_num_ducs()){ - throw std::runtime_error(str(boost::format( + throw uhd::value_error(str(boost::format( "USRP1 suports up to %u TX channels.\n" "However, this TX subdev spec requires %u channels\n" ) % this->get_num_ducs() % _tx_subdev_spec.size())); diff --git a/host/lib/usrp/usrp1/usrp1_ctrl.cpp b/host/lib/usrp/usrp1/usrp1_ctrl.cpp index 09f854813..3fa6cb8b7 100644 --- a/host/lib/usrp/usrp1/usrp1_ctrl.cpp +++ b/host/lib/usrp/usrp1/usrp1_ctrl.cpp @@ -16,7 +16,8 @@ // #include "usrp1_ctrl.hpp" -#include "usrp_commands.h" +#include "usrp_commands.h" +#include <uhd/exception.hpp> #include <uhd/transport/usb_control.hpp> #include <boost/functional/hash.hpp> #include <boost/thread/thread.hpp> @@ -29,13 +30,6 @@ using namespace uhd; -enum firmware_code { - USRP_FPGA_LOAD_SUCCESS, - USRP_FPGA_ALREADY_LOADED, - USRP_FIRMWARE_LOAD_SUCCESS, - USRP_FIRMWARE_ALREADY_LOADED -}; - #define FX2_FIRMWARE_LOAD 0xa0 static const bool load_img_msg = true; @@ -45,15 +39,16 @@ static const bool load_img_msg = true; **********************************************************************/ /*! * Create a file hash - * The hash will be used to identify the loaded firmware and fpga image + * The hash will be used to identify the loaded firmware and fpga image * \param filename file used to generate hash value * \return hash value in a size_t type */ static size_t generate_hash(const char *filename) { std::ifstream file(filename); - if (!file) - std::cerr << "error: cannot open input file " << filename << std::endl; + if (not file){ + throw uhd::io_error(std::string("cannot open input file ") + filename); + } size_t hash = 0; @@ -62,18 +57,19 @@ static size_t generate_hash(const char *filename) boost::hash_combine(hash, ch); } - if (!file.eof()) - std::cerr << "error: file error " << filename << std::endl; + if (not file.eof()){ + throw uhd::io_error(std::string("file error ") + filename); + } - file.close(); - return hash; + file.close(); + return hash; } /*! - * Verify checksum of a Intel HEX record + * Verify checksum of a Intel HEX record * \param record a line from an Intel HEX file - * \return true if record is valid, false otherwise + * \return true if record is valid, false otherwise */ static bool checksum(std::string *record) { @@ -123,7 +119,7 @@ bool parse_record(std::string *record, unsigned int &len, for (i = 0; i < len; i++) { std::istringstream(record->substr(9 + 2 * i, 2)) >> std::hex >> val; data[i] = (unsigned char) val; - } + } return true; } @@ -139,20 +135,15 @@ public: _ctrl_transport = ctrl_transport; } - int usrp_load_firmware(std::string filestring, bool force) + void usrp_load_firmware(std::string filestring, bool force) { const char *filename = filestring.c_str(); size_t hash = generate_hash(filename); - size_t loaded_hash; - if (usrp_get_firmware_hash(loaded_hash) < 0) { - std::cerr << "firmware hash retrieval failed" << std::endl; - return -1; - } + size_t loaded_hash; usrp_get_firmware_hash(loaded_hash); - if (!force && (hash == loaded_hash)) - return USRP_FIRMWARE_ALREADY_LOADED; + if (not force and (hash == loaded_hash)) return; //FIXME: verify types unsigned int len; @@ -160,13 +151,11 @@ public: unsigned int type; unsigned char data[512]; - int ret; std::ifstream file; file.open(filename, std::ifstream::in); if (!file.good()) { - std::cerr << "cannot open firmware input file" << std::endl; - return -1; + throw uhd::io_error("usrp_load_firmware: cannot open firmware input file"); } unsigned char reset_y = 1; @@ -174,56 +163,41 @@ public: //hit the reset line if (load_img_msg) std::cout << "Loading firmware image: " << filestring << "..." << std::flush; - usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0, - &reset_y, 1); - + usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0, &reset_y, 1); + while (!file.eof()) { std::string record; file >> record; - - //check for valid record - if (!checksum(&record) || - !parse_record(&record, len, addr, type, data)) { - std::cerr << "error: bad record" << std::endl; - file.close(); - return -1; + + //check for valid record + if (not checksum(&record) or not parse_record(&record, len, addr, type, data)) { + throw uhd::io_error("usrp_load_firmware: bad record checksum"); } //type 0x00 is data if (type == 0x00) { - ret = usrp_control_write(FX2_FIRMWARE_LOAD, addr, 0, - data, len); - if (ret < 0) { - std::cerr << "error: usrp_control_write failed: "; - std::cerr << ret << std::endl; - file.close(); - return -1; - } - } - //type 0x01 is end + int ret = usrp_control_write(FX2_FIRMWARE_LOAD, addr, 0, data, len); + if (ret < 0) throw uhd::io_error("usrp_load_firmware: usrp_control_write failed"); + } + //type 0x01 is end else if (type == 0x01) { usrp_set_firmware_hash(hash); //set hash before reset - usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0, - &reset_n, 1); + usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0, &reset_n, 1); file.close(); //wait for things to settle boost::this_thread::sleep(boost::posix_time::milliseconds(1000)); if (load_img_msg) std::cout << " done" << std::endl; - return USRP_FIRMWARE_LOAD_SUCCESS; + return; } //type anything else is unhandled else { - std::cerr << "error: unsupported record" << std::endl; - file.close(); - return -1; + throw uhd::io_error("usrp_load_firmware: unsupported record"); } } - //file did not end - std::cerr << "error: bad record" << std::endl; - file.close(); - return -1; + //file did not end + throw uhd::io_error("usrp_load_firmware: bad record"); } void usrp_init(void){ @@ -241,64 +215,48 @@ public: usrp_tx_enable(true); } - int usrp_load_fpga(std::string filestring) + void usrp_load_fpga(std::string filestring) { const char *filename = filestring.c_str(); size_t hash = generate_hash(filename); - size_t loaded_hash; - if (usrp_get_fpga_hash(loaded_hash) < 0) { - std::cerr << "fpga hash retrieval failed" << std::endl; - return -1; - } + size_t loaded_hash; usrp_get_fpga_hash(loaded_hash); - if (hash == loaded_hash) - return USRP_FPGA_ALREADY_LOADED; + if (hash == loaded_hash) return; const int ep0_size = 64; unsigned char buf[ep0_size]; - int ret; if (load_img_msg) std::cout << "Loading FPGA image: " << filestring << "..." << std::flush; std::ifstream file; file.open(filename, std::ios::in | std::ios::binary); if (not file.good()) { - std::cerr << "cannot open fpga input file" << std::endl; - file.close(); - return -1; + throw uhd::io_error("usrp_load_fpga: cannot open fpga input file"); } if (usrp_control_write_cmd(VRQ_FPGA_LOAD, 0, FL_BEGIN) < 0) { - std::cerr << "fpga load error" << std::endl; - file.close(); - return -1; + throw uhd::io_error("usrp_load_fpga: fpga load error"); } while (not file.eof()) { file.read((char *)buf, sizeof(buf)); size_t n = file.gcount(); - ret = usrp_control_write(VRQ_FPGA_LOAD, 0, FL_XFER, - buf, n); + int ret = usrp_control_write(VRQ_FPGA_LOAD, 0, FL_XFER, buf, n); if (ret < 0 or size_t(ret) != n) { - std::cerr << "fpga load error " << ret << std::endl; - file.close(); - return -1; + throw uhd::io_error("usrp_load_fpga: fpga load error"); } } - + if (usrp_control_write_cmd(VRQ_FPGA_LOAD, 0, FL_END) < 0) { - std::cerr << "fpga load error" << std::endl; - file.close(); - return -1; + throw uhd::io_error("usrp_load_fpga: fpga load error"); } usrp_set_fpga_hash(hash); file.close(); if (load_img_msg) std::cout << " done" << std::endl; - return 0; } - int usrp_load_eeprom(std::string filestring) + void usrp_load_eeprom(std::string filestring) { const char *filename = filestring.c_str(); const boost::uint16_t i2c_addr = 0x50; @@ -309,100 +267,92 @@ public: unsigned char data[256]; unsigned char sendbuf[17]; - int ret; std::ifstream file; file.open(filename, std::ifstream::in); - if (!file.good()) { - std::cerr << "cannot open EEPROM input file" << std::endl; - return -1; + if (not file.good()) { + throw uhd::io_error("usrp_load_eeprom: cannot open EEPROM input file"); } file.read((char *)data, 256); len = file.gcount(); if(len == 256) { - std::cerr << "error: image size too large" << std::endl; - file.close(); - return -1; + throw uhd::io_error("usrp_load_eeprom: image size too large"); } const int pagesize = 16; addr = 0; while(len > 0) { - sendbuf[0] = addr; - memcpy(sendbuf+1, &data[addr], len > pagesize ? pagesize : len); - ret = usrp_i2c_write(i2c_addr, sendbuf, (len > pagesize ? pagesize : len)+1); - if (ret < 0) { - std::cerr << "error: usrp_i2c_write failed: "; - std::cerr << ret << std::endl; - file.close(); - return -1; - } - addr += pagesize; - len -= pagesize; - boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + sendbuf[0] = addr; + memcpy(sendbuf+1, &data[addr], len > pagesize ? pagesize : len); + int ret = usrp_i2c_write(i2c_addr, sendbuf, (len > pagesize ? pagesize : len)+1); + if (ret < 0) { + throw uhd::io_error("usrp_load_eeprom: usrp_i2c_write failed"); + } + addr += pagesize; + len -= pagesize; + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); } file.close(); - return 0; } - int usrp_set_led(int led_num, bool on) + void usrp_set_led(int led_num, bool on) { - return usrp_control_write_cmd(VRQ_SET_LED, on, led_num); + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_SET_LED, on, led_num) >= 0); } - int usrp_get_firmware_hash(size_t &hash) + void usrp_get_firmware_hash(size_t &hash) { - return usrp_control_read(0xa0, USRP_HASH_SLOT_0_ADDR, 0, - (unsigned char*) &hash, sizeof(size_t)); + UHD_ASSERT_THROW(usrp_control_read(0xa0, USRP_HASH_SLOT_0_ADDR, 0, + (unsigned char*) &hash, sizeof(size_t)) >= 0); } - int usrp_set_firmware_hash(size_t hash) + void usrp_set_firmware_hash(size_t hash) { - return usrp_control_write(0xa0, USRP_HASH_SLOT_0_ADDR, 0, - (unsigned char*) &hash, sizeof(size_t)); + UHD_ASSERT_THROW(usrp_control_write(0xa0, USRP_HASH_SLOT_0_ADDR, 0, + (unsigned char*) &hash, sizeof(size_t)) >= 0); } - int usrp_get_fpga_hash(size_t &hash) + void usrp_get_fpga_hash(size_t &hash) { - return usrp_control_read(0xa0, USRP_HASH_SLOT_1_ADDR, 0, - (unsigned char*) &hash, sizeof(size_t)); + UHD_ASSERT_THROW(usrp_control_read(0xa0, USRP_HASH_SLOT_1_ADDR, 0, + (unsigned char*) &hash, sizeof(size_t)) >= 0); } - int usrp_set_fpga_hash(size_t hash) + void usrp_set_fpga_hash(size_t hash) { - return usrp_control_write(0xa0, USRP_HASH_SLOT_1_ADDR, 0, - (unsigned char*) &hash, sizeof(size_t)); + UHD_ASSERT_THROW(usrp_control_write(0xa0, USRP_HASH_SLOT_1_ADDR, 0, + (unsigned char*) &hash, sizeof(size_t)) >= 0); } - int usrp_tx_enable(bool on) + void usrp_tx_enable(bool on) { - return usrp_control_write_cmd(VRQ_FPGA_SET_TX_ENABLE, on, 0); + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_FPGA_SET_TX_ENABLE, on, 0) >= 0); } - int usrp_rx_enable(bool on) + void usrp_rx_enable(bool on) { - return usrp_control_write_cmd(VRQ_FPGA_SET_RX_ENABLE, on, 0); + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_FPGA_SET_RX_ENABLE, on, 0) >= 0); } - int usrp_tx_reset(bool on) + void usrp_tx_reset(bool on) { - return usrp_control_write_cmd(VRQ_FPGA_SET_TX_RESET, on, 0); + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_FPGA_SET_TX_RESET, on, 0) >= 0); } - int usrp_rx_reset(bool on) + void usrp_rx_reset(bool on) { - return usrp_control_write_cmd(VRQ_FPGA_SET_RX_RESET, on, 0); + UHD_ASSERT_THROW(usrp_control_write_cmd(VRQ_FPGA_SET_RX_RESET, on, 0) >= 0); } @@ -417,7 +367,7 @@ public: value, // wValue index, // wIndex buff, // data - length); // wLength + length); // wLength } diff --git a/host/lib/usrp/usrp1/usrp1_ctrl.hpp b/host/lib/usrp/usrp1/usrp1_ctrl.hpp index 8ccfacab7..ee68f8401 100644 --- a/host/lib/usrp/usrp1/usrp1_ctrl.hpp +++ b/host/lib/usrp/usrp1/usrp1_ctrl.hpp @@ -40,60 +40,21 @@ public: * Load firmware in Intel HEX Format onto device * \param filename name of firmware file * \param force reload firmware if already loaded - * \return 0 on success, error code otherwise */ - virtual int usrp_load_firmware(std::string filename, + virtual void usrp_load_firmware(std::string filename, bool force = false) = 0; /*! * Load fpga file onto usrp * \param filename name of fpga image - * \return 0 on success, error code otherwise */ - virtual int usrp_load_fpga(std::string filename) = 0; + virtual void usrp_load_fpga(std::string filename) = 0; /*! * Load USB descriptor file in Intel HEX format into EEPROM - * \param filename name of EEPROM image - * \return 0 on success, error code otherwise + * \param filename name of EEPROM image */ - virtual int usrp_load_eeprom(std::string filestring) = 0; - - /*! - * Set led usrp - * \param led_num which LED to control (0 or 1) - * \param on turn LED on or off - * \return 0 on success, error code otherwise - */ - virtual int usrp_set_led(int led_num, bool on) = 0; - - /*! - * Get firmware hash - * \param hash a size_t hash value - * \return 0 on success, error code otherwise - */ - virtual int usrp_get_firmware_hash(size_t &hash) = 0; - - /*! - * Set firmware hash - * \param hash a size_t hash value - * \return 0 on success, error code otherwise - */ - virtual int usrp_set_firmware_hash(size_t hash) = 0; - - /*! - * Get fpga hash - * \param hash a size_t hash value - * \return 0 on success, error code otherwise - */ - virtual int usrp_get_fpga_hash(size_t &hash) = 0; - - /*! - * Set fpga hash - * \param hash a size_t hash value - * \return 0 on success, error code otherwise - */ - virtual int usrp_set_fpga_hash(size_t hash) = 0; + virtual void usrp_load_eeprom(std::string filestring) = 0; /*! * Submit an IN transfer diff --git a/host/lib/usrp/usrp1/usrp1_iface.cpp b/host/lib/usrp/usrp1/usrp1_iface.cpp index 63fcd5777..0c37610ce 100644 --- a/host/lib/usrp/usrp1/usrp1_iface.cpp +++ b/host/lib/usrp/usrp1/usrp1_iface.cpp @@ -17,7 +17,7 @@ #include "usrp1_iface.hpp" #include "usrp_commands.h" -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/byteswap.hpp> #include <boost/format.hpp> #include <stdexcept> @@ -70,8 +70,7 @@ public: (unsigned char*) &swapped, sizeof(boost::uint32_t)); - if (ret < 0) - std::cerr << "USRP: failed memory write: " << ret << std::endl; + if (ret < 0) throw uhd::io_error("USRP1: failed control write"); } boost::uint32_t peek32(boost::uint32_t addr) @@ -88,11 +87,27 @@ public: (unsigned char*) &value_out, sizeof(boost::uint32_t)); - if (ret < 0) - std::cerr << "USRP: failed memory read: " << ret << std::endl; + if (ret < 0) throw uhd::io_error("USRP1: failed control read"); return uhd::ntohx(value_out); } + + void poke16(boost::uint32_t, boost::uint16_t) { + throw uhd::not_implemented_error("Unhandled command poke16()"); + } + + boost::uint16_t peek16(boost::uint32_t) { + throw uhd::not_implemented_error("Unhandled command peek16()"); + return 0; + } + + void write_uart(boost::uint8_t, const std::string &) { + throw uhd::not_implemented_error("Unhandled command write_uart()"); + } + + std::string read_uart(boost::uint8_t) { + throw uhd::not_implemented_error("Unhandled command read_uart()"); + } /******************************************************************* * I2C @@ -176,10 +191,7 @@ public: buff, (w_len_h << 8) | (w_len_l << 0)); - if (ret < 0) { - std::cout << "USRP: failed SPI readback transaction: " - << std::dec << ret << std::endl; - } + if (ret < 0) throw uhd::io_error("USRP1: failed SPI readback transaction"); boost::uint32_t val = (((boost::uint32_t)buff[0]) << 0) | (((boost::uint32_t)buff[1]) << 8) | @@ -197,10 +209,7 @@ public: (w_index_h << 8) | (w_index_l << 0), buff, num_bytes); - if (ret < 0) { - std::cout << "USRP: failed SPI transaction: " - << std::dec << ret << std::endl; - } + if (ret < 0) throw uhd::io_error("USRP1: failed SPI transaction"); return 0; } @@ -234,8 +243,7 @@ public: length); } - if (ret < 0) - std::cerr << "USRP: failed firmware command: " << ret << std::endl; + if (ret < 0) throw uhd::io_error("USRP1: failed firmware command"); } private: diff --git a/host/lib/usrp/usrp1/usrp1_iface.hpp b/host/lib/usrp/usrp1/usrp1_iface.hpp index 34a2330b5..fdb7464ce 100644 --- a/host/lib/usrp/usrp1/usrp1_iface.hpp +++ b/host/lib/usrp/usrp1/usrp1_iface.hpp @@ -18,8 +18,7 @@ #ifndef INCLUDED_USRP1_IFACE_HPP #define INCLUDED_USRP1_IFACE_HPP -#include <uhd/usrp/mboard_eeprom.hpp> -#include <uhd/types/serial.hpp> +#include <uhd/usrp/mboard_iface.hpp> #include <boost/shared_ptr.hpp> #include <boost/utility.hpp> #include "usrp1_ctrl.hpp" @@ -29,10 +28,13 @@ * Provides a set of functions to implementation layer. * Including spi, peek, poke, control... */ -class usrp1_iface : boost::noncopyable, public uhd::i2c_iface{ +class usrp1_iface : public uhd::usrp::mboard_iface, boost::noncopyable{ public: typedef boost::shared_ptr<usrp1_iface> sptr; + //motherboard eeprom map structure + uhd::usrp::mboard_eeprom_t mb_eeprom; + /*! * Make a new usrp1 interface with the control transport. * \param ctrl_transport the usrp controller object @@ -41,35 +43,6 @@ public: static sptr make(usrp_ctrl::sptr ctrl_transport); /*! - * Write a register (32 bits) - * \param addr the address - * \param data the 32bit data - */ - virtual void poke32(boost::uint32_t addr, boost::uint32_t data) = 0; - - /*! - * Read a register (32 bits) - * \param addr the address - * \return the 32bit data - */ - virtual boost::uint32_t peek32(boost::uint32_t addr) = 0; - - /*! - * Perform an spi transaction. - * \param which_slave the slave device number - * \param config spi config args - * \param data the bits to write - * \param num_bits how many bits in data - * \param readback true to readback a value - * \return spi data if readback set - */ - virtual boost::uint32_t transact_spi(int which_slave, - const uhd::spi_config_t &config, - boost::uint32_t data, - size_t num_bits, - bool readback) = 0; - - /*! * Perform a general USB firmware OUT operation * \param request * \param value @@ -82,8 +55,6 @@ public: boost::uint16_t index, unsigned char* buff, boost::uint16_t length) = 0; - - uhd::usrp::mboard_eeprom_t mb_eeprom; }; #endif /* INCLUDED_USRP1_IFACE_HPP */ diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp index 918032037..7005c59f2 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.cpp +++ b/host/lib/usrp/usrp1/usrp1_impl.cpp @@ -19,11 +19,12 @@ #include "usrp1_ctrl.hpp" #include "fpga_regs_standard.h" #include "usrp_spi_defs.h" +#include <uhd/utils/safe_call.hpp> #include <uhd/transport/usb_control.hpp> #include <uhd/usrp/device_props.hpp> #include <uhd/usrp/mboard_props.hpp> #include <uhd/utils/warning.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/images.hpp> #include <boost/format.hpp> @@ -199,7 +200,16 @@ usrp1_impl::usrp1_impl(uhd::transport::usb_zero_copy::sptr data_transport, } usrp1_impl::~usrp1_impl(void){ - /* NOP */ + //Safely destruct all RAII objects in a device. + //This prevents the mboard deconstructor from throwing, + //which allows the device to be safely deconstructed. + BOOST_FOREACH(dboard_slot_t slot, _dboard_slots){ + UHD_SAFE_CALL(_dboard_managers[slot].reset();) + UHD_SAFE_CALL(_dboard_ifaces[slot].reset();) + UHD_SAFE_CALL(_codec_ctrls[slot].reset();) + } + UHD_SAFE_CALL(_clock_ctrl.reset();) + UHD_SAFE_CALL(_io_impl.reset();) } bool usrp1_impl::recv_async_msg(uhd::async_metadata_t &, double timeout){ diff --git a/host/lib/usrp/usrp1/usrp1_impl.hpp b/host/lib/usrp/usrp1/usrp1_impl.hpp index 1d9f6709f..9755c466d 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.hpp +++ b/host/lib/usrp/usrp1/usrp1_impl.hpp @@ -182,19 +182,19 @@ private: //rx dsp functions and settings void rx_dsp_init(void); - void rx_dsp_get(const wax::obj &, wax::obj &); - void rx_dsp_set(const wax::obj &, const wax::obj &); - uhd::dict<std::string, double> _rx_dsp_freqs; + void rx_dsp_get(const wax::obj &, wax::obj &, size_t); + void rx_dsp_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<size_t, double> _rx_dsp_freqs; size_t _rx_dsp_decim; - wax_obj_proxy::sptr _rx_dsp_proxy; + uhd::dict<std::string, wax_obj_proxy::sptr> _rx_dsp_proxies; //tx dsp functions and settings void tx_dsp_init(void); - void tx_dsp_get(const wax::obj &, wax::obj &); - void tx_dsp_set(const wax::obj &, const wax::obj &); - uhd::dict<std::string, double> _tx_dsp_freqs; + void tx_dsp_get(const wax::obj &, wax::obj &, size_t); + void tx_dsp_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<size_t, double> _tx_dsp_freqs; size_t _tx_dsp_interp; - wax_obj_proxy::sptr _tx_dsp_proxy; + uhd::dict<std::string, wax_obj_proxy::sptr> _tx_dsp_proxies; //transports uhd::transport::usb_zero_copy::sptr _data_transport; diff --git a/host/lib/usrp/usrp2/clock_ctrl.cpp b/host/lib/usrp/usrp2/clock_ctrl.cpp index 27ccefb2b..abda53bf2 100644 --- a/host/lib/usrp/usrp2/clock_ctrl.cpp +++ b/host/lib/usrp/usrp2/clock_ctrl.cpp @@ -19,7 +19,7 @@ #include "ad9510_regs.hpp" #include "usrp2_regs.hpp" //spi slave constants #include "usrp2_clk_regs.hpp" -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <boost/cstdint.hpp> #include <boost/lexical_cast.hpp> #include <boost/math/special_functions/round.hpp> @@ -305,7 +305,7 @@ private: */ void write_reg(boost::uint8_t addr){ boost::uint32_t data = _ad9510_regs.get_write_reg(addr); - _iface->transact_spi(SPI_SS_AD9510, spi_config_t::EDGE_RISE, data, 24, false /*no rb*/); + _iface->write_spi(SPI_SS_AD9510, spi_config_t::EDGE_RISE, data, 24); } /*! diff --git a/host/lib/usrp/usrp2/codec_ctrl.cpp b/host/lib/usrp/usrp2/codec_ctrl.cpp index 890969b5a..0fdcedf62 100644 --- a/host/lib/usrp/usrp2/codec_ctrl.cpp +++ b/host/lib/usrp/usrp2/codec_ctrl.cpp @@ -19,10 +19,10 @@ #include "ad9777_regs.hpp" #include "ads62p44_regs.hpp" #include "usrp2_regs.hpp" +#include <uhd/exception.hpp> #include <boost/cstdint.hpp> #include <boost/foreach.hpp> #include <iostream> -#include <uhd/utils/exception.hpp> static const bool codec_ctrl_debug = false; @@ -118,7 +118,7 @@ public: case 2: _ad9777_regs.modulation_mode = ad9777_regs_t::MODULATION_MODE_FS_2; break; case 4: _ad9777_regs.modulation_mode = ad9777_regs_t::MODULATION_MODE_FS_4; break; case 8: _ad9777_regs.modulation_mode = ad9777_regs_t::MODULATION_MODE_FS_8; break; - default: throw std::runtime_error("unknown modulation mode for ad9777"); + default: throw uhd::value_error("unknown modulation mode for ad9777"); } this->send_ad9777_reg(0x01); //set the register @@ -168,17 +168,17 @@ private: void send_ad9777_reg(boost::uint8_t addr){ boost::uint16_t reg = _ad9777_regs.get_write_reg(addr); if (codec_ctrl_debug) std::cout << "send_ad9777_reg: " << std::hex << reg << std::endl; - _iface->transact_spi( + _iface->write_spi( SPI_SS_AD9777, spi_config_t::EDGE_RISE, - reg, 16, false /*no rb*/ + reg, 16 ); } void send_ads62p44_reg(boost::uint8_t addr) { boost::uint16_t reg = _ads62p44_regs.get_write_reg(addr); - _iface->transact_spi( + _iface->write_spi( SPI_SS_ADS62P44, spi_config_t::EDGE_FALL, - reg, 16, false /*no rb*/ + reg, 16 ); } }; diff --git a/host/lib/usrp/usrp2/codec_impl.cpp b/host/lib/usrp/usrp2/codec_impl.cpp index 09bec6db2..50320773f 100644 --- a/host/lib/usrp/usrp2/codec_impl.cpp +++ b/host/lib/usrp/usrp2/codec_impl.cpp @@ -16,13 +16,13 @@ // #include "usrp2_impl.hpp" +#include <uhd/utils/assert_has.hpp> +#include <uhd/exception.hpp> #include <uhd/usrp/codec_props.hpp> #include <uhd/types/dict.hpp> #include <uhd/types/ranges.hpp> #include <boost/bind.hpp> #include <boost/assign/list_of.hpp> -#include <uhd/utils/assert.hpp> -#include <uhd/utils/exception.hpp> using namespace uhd; using namespace uhd::usrp; diff --git a/host/lib/usrp/usrp2/dboard_iface.cpp b/host/lib/usrp/usrp2/dboard_iface.cpp index c539b0058..924a6e901 100644 --- a/host/lib/usrp/usrp2/dboard_iface.cpp +++ b/host/lib/usrp/usrp2/dboard_iface.cpp @@ -20,7 +20,7 @@ #include "usrp2_regs.hpp" //wishbone address constants #include <uhd/usrp/dboard_iface.hpp> #include <uhd/types/dict.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/algorithm.hpp> #include <boost/assign/list_of.hpp> #include <boost/asio.hpp> //htonl and ntohl @@ -257,7 +257,7 @@ void usrp2_dboard_iface::write_spi( boost::uint32_t data, size_t num_bits ){ - _iface->transact_spi(unit_to_spi_dev[unit], config, data, num_bits, false /*no rb*/); + _iface->write_spi(unit_to_spi_dev[unit], config, data, num_bits); } boost::uint32_t usrp2_dboard_iface::read_write_spi( @@ -266,7 +266,7 @@ boost::uint32_t usrp2_dboard_iface::read_write_spi( boost::uint32_t data, size_t num_bits ){ - return _iface->transact_spi(unit_to_spi_dev[unit], config, data, num_bits, true /*rb*/); + return _iface->read_spi(unit_to_spi_dev[unit], config, data, num_bits); } /*********************************************************************** @@ -288,9 +288,9 @@ void usrp2_dboard_iface::_write_aux_dac(unit_t unit){ (UNIT_RX, SPI_SS_RX_DAC) (UNIT_TX, SPI_SS_TX_DAC) ; - _iface->transact_spi( + _iface->write_spi( unit_to_spi_dac[unit], spi_config_t::EDGE_FALL, - _dac_regs[unit].get_reg(), 24, false /*no rb*/ + _dac_regs[unit].get_reg(), 24 ); } @@ -336,13 +336,13 @@ double usrp2_dboard_iface::read_aux_adc(unit_t unit, aux_adc_t which){ } ad7922_regs.chn = ad7922_regs.mod; //normal mode: mod == chn //write and read spi - _iface->transact_spi( + _iface->write_spi( unit_to_spi_adc[unit], config, - ad7922_regs.get_reg(), 16, false /*no rb*/ + ad7922_regs.get_reg(), 16 ); - ad7922_regs.set_reg(boost::uint16_t(_iface->transact_spi( + ad7922_regs.set_reg(boost::uint16_t(_iface->read_spi( unit_to_spi_adc[unit], config, - ad7922_regs.get_reg(), 16, true /*rb*/ + ad7922_regs.get_reg(), 16 ))); //convert to voltage and return diff --git a/host/lib/usrp/usrp2/dboard_impl.cpp b/host/lib/usrp/usrp2/dboard_impl.cpp index 4f1dcc46b..3f41cddcf 100644 --- a/host/lib/usrp/usrp2/dboard_impl.cpp +++ b/host/lib/usrp/usrp2/dboard_impl.cpp @@ -22,7 +22,7 @@ #include <uhd/usrp/dsp_utils.hpp> #include <uhd/usrp/subdev_props.hpp> #include <uhd/usrp/dboard_props.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <boost/format.hpp> #include <boost/bind.hpp> #include <boost/asio.hpp> //htonl and ntohl diff --git a/host/lib/usrp/usrp2/dsp_impl.cpp b/host/lib/usrp/usrp2/dsp_impl.cpp index 8340f7cdd..cdd559e94 100644 --- a/host/lib/usrp/usrp2/dsp_impl.cpp +++ b/host/lib/usrp/usrp2/dsp_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -28,12 +28,79 @@ using namespace uhd; using namespace uhd::usrp; -static const size_t default_decim = 16; -static const size_t default_interp = 16; - /*********************************************************************** - * DDC Helper Methods + * DSP impl and methods **********************************************************************/ +struct usrp2_mboard_impl::dsp_impl{ + uhd::dict<size_t, size_t> ddc_decim; + uhd::dict<size_t, double> ddc_freq; + uhd::dict<size_t, size_t> duc_interp; + uhd::dict<size_t, double> duc_freq; + std::vector<size_t> decim_and_interp_rates; + uhd::dict<size_t, bool> continuous_streaming; +}; + +void usrp2_mboard_impl::dsp_init(void){ + //create new dsp impl + _dsp_impl = UHD_PIMPL_MAKE(dsp_impl, ()); + + //load the allowed decim/interp rates + //range(4, 128+1, 1) + range(130, 256+1, 2) + range(260, 512+1, 4) + for (size_t i = 4; i <= 128; i+=1){ + _dsp_impl->decim_and_interp_rates.push_back(i); + } + for (size_t i = 130; i <= 256; i+=2){ + _dsp_impl->decim_and_interp_rates.push_back(i); + } + for (size_t i = 260; i <= 512; i+=4){ + _dsp_impl->decim_and_interp_rates.push_back(i); + } + + //bind and initialize the rx dsps + for (size_t i = 0; i < NUM_RX_DSPS; i++){ + _rx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&usrp2_mboard_impl::ddc_get, this, _1, _2, i), + boost::bind(&usrp2_mboard_impl::ddc_set, this, _1, _2, i) + ); + + //initial config and update + ddc_set(DSP_PROP_FREQ_SHIFT, double(0), i); + ddc_set(DSP_PROP_HOST_RATE, double(get_master_clock_freq()/16), i); + + //setup the rx control registers + _iface->poke32(_iface->regs.rx_ctrl[i].clear_overrun, 1); //reset + _iface->poke32(_iface->regs.rx_ctrl[i].nsamps_per_pkt, _device.get_max_recv_samps_per_packet()); + _iface->poke32(_iface->regs.rx_ctrl[i].nchannels, 1); + _iface->poke32(_iface->regs.rx_ctrl[i].vrt_header, 0 + | (0x1 << 28) //if data with stream id + | (0x1 << 26) //has trailer + | (0x3 << 22) //integer time other + | (0x1 << 20) //fractional time sample count + ); + _iface->poke32(_iface->regs.rx_ctrl[i].vrt_stream_id, usrp2_impl::RECV_SID); + _iface->poke32(_iface->regs.rx_ctrl[i].vrt_trailer, 0); + _iface->poke32(_iface->regs.time64_tps, size_t(get_master_clock_freq())); + } + + //bind and initialize the tx dsps + for (size_t i = 0; i < NUM_TX_DSPS; i++){ + _tx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&usrp2_mboard_impl::duc_get, this, _1, _2, i), + boost::bind(&usrp2_mboard_impl::duc_set, this, _1, _2, i) + ); + + //initial config and update + duc_set(DSP_PROP_FREQ_SHIFT, double(0), i); + duc_set(DSP_PROP_HOST_RATE, double(get_master_clock_freq()/16), i); + + //init the tx control registers + _iface->poke32(_iface->regs.tx_ctrl_clear_state, 1); //reset + _iface->poke32(_iface->regs.tx_ctrl_num_chan, 0); //1 channel + _iface->poke32(_iface->regs.tx_ctrl_report_sid, usrp2_impl::ASYNC_SID); + _iface->poke32(_iface->regs.tx_ctrl_policy, U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET); + } +} + template <typename rate_type> static rate_type pick_closest_rate(double exact_rate, const std::vector<rate_type> &rates){ unsigned closest_match = rates.front(); @@ -44,27 +111,28 @@ static rate_type pick_closest_rate(double exact_rate, const std::vector<rate_typ return closest_match; } -void usrp2_mboard_impl::init_ddc_config(void){ - //create the ddc in the rx dsp dict - _rx_dsp_proxy = wax_obj_proxy::make( - boost::bind(&usrp2_mboard_impl::ddc_get, this, _1, _2), - boost::bind(&usrp2_mboard_impl::ddc_set, this, _1, _2) - ); +void usrp2_mboard_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd, size_t which_dsp){ + _dsp_impl->continuous_streaming[which_dsp] = stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS; + _iface->poke32(_iface->regs.rx_ctrl[which_dsp].stream_cmd, dsp_type1::calc_stream_cmd_word(stream_cmd)); + _iface->poke32(_iface->regs.rx_ctrl[which_dsp].time_secs, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); + _iface->poke32(_iface->regs.rx_ctrl[which_dsp].time_ticks, stream_cmd.time_spec.get_tick_count(get_master_clock_freq())); +} - //initial config and update - ddc_set(DSP_PROP_FREQ_SHIFT, double(0)); - ddc_set(DSP_PROP_HOST_RATE, double(get_master_clock_freq()/default_decim)); +void usrp2_mboard_impl::handle_overflow(size_t which_dsp){ + if (_dsp_impl->continuous_streaming[which_dsp]){ //re-issue the stream command if already continuous + this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS, which_dsp); + } } /*********************************************************************** * DDC Properties **********************************************************************/ -void usrp2_mboard_impl::ddc_get(const wax::obj &key_, wax::obj &val){ +void usrp2_mboard_impl::ddc_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()){ case DSP_PROP_NAME: - val = _iface->get_cname() + " ddc0"; + val = str(boost::format("%s ddc%d") % _iface->get_cname() % which_dsp); return; case DSP_PROP_OTHERS: @@ -72,11 +140,7 @@ void usrp2_mboard_impl::ddc_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_FREQ_SHIFT: - val = _ddc_freq; - return; - - case DSP_PROP_FREQ_SHIFT_NAMES: - val = prop_names_t(1, ""); + val = _dsp_impl->ddc_freq[which_dsp]; return; case DSP_PROP_CODEC_RATE: @@ -84,37 +148,41 @@ void usrp2_mboard_impl::ddc_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_HOST_RATE: - val = get_master_clock_freq()/_ddc_decim; + val = get_master_clock_freq()/_dsp_impl->ddc_decim[which_dsp]; return; default: UHD_THROW_PROP_GET_ERROR(); } } -void usrp2_mboard_impl::ddc_set(const wax::obj &key_, const wax::obj &val){ +void usrp2_mboard_impl::ddc_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()){ + case DSP_PROP_STREAM_CMD: + issue_ddc_stream_cmd(val.as<stream_cmd_t>(), which_dsp); + return; + case DSP_PROP_FREQ_SHIFT:{ double new_freq = val.as<double>(); - _iface->poke32(_iface->regs.dsp_rx_freq, + _iface->poke32(_iface->regs.dsp_rx[which_dsp].freq, dsp_type1::calc_cordic_word_and_update(new_freq, get_master_clock_freq()) ); - _ddc_freq = new_freq; //shadow + _dsp_impl->ddc_freq[which_dsp] = new_freq; //shadow } return; case DSP_PROP_HOST_RATE:{ double extact_rate = get_master_clock_freq()/val.as<double>(); - _ddc_decim = pick_closest_rate(extact_rate, _allowed_decim_and_interp_rates); + _dsp_impl->ddc_decim[which_dsp] = pick_closest_rate(extact_rate, _dsp_impl->decim_and_interp_rates); //set the decimation - _iface->poke32(_iface->regs.dsp_rx_decim_rate, dsp_type1::calc_cic_filter_word(_ddc_decim)); + _iface->poke32(_iface->regs.dsp_rx[which_dsp].decim_rate, dsp_type1::calc_cic_filter_word(_dsp_impl->ddc_decim[which_dsp])); //set the scaling static const boost::int16_t default_rx_scale_iq = 1024; - _iface->poke32(_iface->regs.dsp_rx_scale_iq, + _iface->poke32(_iface->regs.dsp_rx[which_dsp].scale_iq, dsp_type1::calc_iq_scale_word(default_rx_scale_iq, default_rx_scale_iq) ); } @@ -125,29 +193,14 @@ void usrp2_mboard_impl::ddc_set(const wax::obj &key_, const wax::obj &val){ } /*********************************************************************** - * DUC Helper Methods - **********************************************************************/ -void usrp2_mboard_impl::init_duc_config(void){ - //create the duc in the tx dsp dict - _tx_dsp_proxy = wax_obj_proxy::make( - boost::bind(&usrp2_mboard_impl::duc_get, this, _1, _2), - boost::bind(&usrp2_mboard_impl::duc_set, this, _1, _2) - ); - - //initial config and update - duc_set(DSP_PROP_FREQ_SHIFT, double(0)); - duc_set(DSP_PROP_HOST_RATE, double(get_master_clock_freq()/default_interp)); -} - -/*********************************************************************** * DUC Properties **********************************************************************/ -void usrp2_mboard_impl::duc_get(const wax::obj &key_, wax::obj &val){ +void usrp2_mboard_impl::duc_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()){ case DSP_PROP_NAME: - val = _iface->get_cname() + " duc0"; + val = str(boost::format("%s duc%d") % _iface->get_cname() % which_dsp); return; case DSP_PROP_OTHERS: @@ -155,11 +208,7 @@ void usrp2_mboard_impl::duc_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_FREQ_SHIFT: - val = _duc_freq; - return; - - case DSP_PROP_FREQ_SHIFT_NAMES: - val = prop_names_t(1, ""); + val = _dsp_impl->duc_freq[which_dsp]; return; case DSP_PROP_CODEC_RATE: @@ -167,14 +216,14 @@ void usrp2_mboard_impl::duc_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_HOST_RATE: - val = get_master_clock_freq()/_duc_interp; + val = get_master_clock_freq()/_dsp_impl->duc_interp[which_dsp]; return; default: UHD_THROW_PROP_GET_ERROR(); } } -void usrp2_mboard_impl::duc_set(const wax::obj &key_, const wax::obj &val){ +void usrp2_mboard_impl::duc_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()){ @@ -196,19 +245,19 @@ void usrp2_mboard_impl::duc_set(const wax::obj &key_, const wax::obj &val){ _iface->poke32(_iface->regs.dsp_tx_freq, dsp_type1::calc_cordic_word_and_update(new_freq, codec_rate) ); - _duc_freq = new_freq + dac_shift; //shadow + _dsp_impl->duc_freq[which_dsp] = new_freq + dac_shift; //shadow } return; case DSP_PROP_HOST_RATE:{ double extact_rate = get_master_clock_freq()/val.as<double>(); - _duc_interp = pick_closest_rate(extact_rate, _allowed_decim_and_interp_rates); + _dsp_impl->duc_interp[which_dsp] = pick_closest_rate(extact_rate, _dsp_impl->decim_and_interp_rates); //set the interpolation - _iface->poke32(_iface->regs.dsp_tx_interp_rate, dsp_type1::calc_cic_filter_word(_duc_interp)); + _iface->poke32(_iface->regs.dsp_tx_interp_rate, dsp_type1::calc_cic_filter_word(_dsp_impl->duc_interp[which_dsp])); //set the scaling - _iface->poke32(_iface->regs.dsp_tx_scale_iq, dsp_type1::calc_iq_scale_word(_duc_interp)); + _iface->poke32(_iface->regs.dsp_tx_scale_iq, dsp_type1::calc_iq_scale_word(_dsp_impl->duc_interp[which_dsp])); } return; diff --git a/host/lib/usrp/usrp2/fw_common.h b/host/lib/usrp/usrp2/fw_common.h index a22f805e1..68c49cafc 100644 --- a/host/lib/usrp/usrp2/fw_common.h +++ b/host/lib/usrp/usrp2/fw_common.h @@ -30,8 +30,8 @@ extern "C" { #endif //fpga and firmware compatibility numbers -#define USRP2_FPGA_COMPAT_NUM 4 -#define USRP2_FW_COMPAT_NUM 8 +#define USRP2_FPGA_COMPAT_NUM 5 +#define USRP2_FW_COMPAT_NUM 9 //used to differentiate control packets over data port #define USRP2_INVALID_VRT_HEADER 0 @@ -40,8 +40,9 @@ extern "C" { // Dynamic and/or private ports: 49152-65535 #define USRP2_UDP_CTRL_PORT 49152 //#define USRP2_UDP_UPDATE_PORT 49154 -#define USRP2_UDP_DATA_PORT 49156 +#define USRP2_UDP_DSP0_PORT 49156 #define USRP2_UDP_ERR0_PORT 49157 +#define USRP2_UDP_DSP1_PORT 49158 //////////////////////////////////////////////////////////////////////// // I2C addresses @@ -88,6 +89,9 @@ typedef enum{ USRP2_CTRL_ID_SO_LIKE_CAN_YOU_READ_THIS_UART_BRO = 'v', USRP2_CTRL_ID_I_HELLA_READ_THAT_UART_DUDE = 'V', + USRP2_CTRL_ID_HOLLER_AT_ME_BRO = 'l', + USRP2_CTRL_ID_HOLLER_BACK_DUDE = 'L', + USRP2_CTRL_ID_PEACE_OUT = '~' } usrp2_ctrl_id_t; @@ -132,6 +136,9 @@ typedef struct{ uint8_t bytes; uint8_t data[20]; } uart_args; + struct { + uint32_t len; + } echo_args; } data; } usrp2_ctrl_data_t; diff --git a/host/lib/usrp/usrp2/io_impl.cpp b/host/lib/usrp/usrp2/io_impl.cpp index a22482271..340e9d155 100644 --- a/host/lib/usrp/usrp2/io_impl.cpp +++ b/host/lib/usrp/usrp2/io_impl.cpp @@ -18,6 +18,8 @@ #include "../../transport/vrt_packet_handler.hpp" #include "usrp2_impl.hpp" #include "usrp2_regs.hpp" +#include <uhd/exception.hpp> +#include <uhd/usrp/mboard_props.hpp> #include <uhd/utils/byteswap.hpp> #include <uhd/utils/thread_priority.hpp> #include <uhd/transport/bounded_buffer.hpp> @@ -136,27 +138,26 @@ private: size_t _indexes; **********************************************************************/ struct usrp2_impl::io_impl{ - io_impl(size_t send_frame_size, const std::vector<zero_copy_if::sptr> &xports): - xports(xports), + io_impl(std::vector<zero_copy_if::sptr> &dsp_xports): + dsp_xports(dsp_xports), //the assumption is that all data transports should be identical get_recv_buffs_fcn(boost::bind(&usrp2_impl::io_impl::get_recv_buffs, this, _1)), get_send_buffs_fcn(boost::bind(&usrp2_impl::io_impl::get_send_buffs, this, _1)), - packet_handler_recv_state(xports.size()), - packet_handler_send_state(xports.size()), async_msg_fifo(100/*messages deep*/) { - for (size_t i = 0; i < xports.size(); i++){ - fc_mons.push_back(flow_control_monitor::sptr( - new flow_control_monitor(usrp2_impl::sram_bytes/send_frame_size) - )); - //init empty packet infos - vrt::if_packet_info_t packet_info; - packet_info.packet_count = 0xf; - packet_info.has_tsi = true; - packet_info.tsi = 0; - packet_info.has_tsf = true; - packet_info.tsf = 0; - prev_infos.push_back(packet_info); + for (size_t i = 0; i < dsp_xports.size(); i++){ + fc_mons.push_back(flow_control_monitor::sptr(new flow_control_monitor( + usrp2_impl::sram_bytes/dsp_xports.front()->get_send_frame_size() + )));; } + + //init empty packet infos + vrt::if_packet_info_t packet_info = vrt::if_packet_info_t(); + packet_info.packet_count = 0xf; + packet_info.has_tsi = true; + packet_info.tsi = 0; + packet_info.has_tsf = true; + packet_info.tsf = 0; + prev_infos.resize(dsp_xports.size(), packet_info); } ~io_impl(void){ @@ -166,15 +167,15 @@ struct usrp2_impl::io_impl{ } bool get_send_buffs(vrt_packet_handler::managed_send_buffs_t &buffs){ - UHD_ASSERT_THROW(xports.size() == buffs.size()); + UHD_ASSERT_THROW(send_map.size() == buffs.size()); //calculate the flow control word const boost::uint32_t fc_word32 = packet_handler_send_state.next_packet_seq; //grab a managed buffer for each index for (size_t i = 0; i < buffs.size(); i++){ - if (not fc_mons[i]->check_fc_condition(fc_word32, send_timeout)) return false; - buffs[i] = xports[i]->get_send_buff(send_timeout); + if (not fc_mons[send_map[i]]->check_fc_condition(fc_word32, send_timeout)) return false; + buffs[i] = dsp_xports[send_map[i]]->get_send_buff(send_timeout); if (not buffs[i].get()) return false; buffs[i]->cast<boost::uint32_t *>()[0] = uhd::htonx(fc_word32); } @@ -182,9 +183,13 @@ struct usrp2_impl::io_impl{ } alignment_indexes indexes_to_do; //used in alignment logic + time_spec_t expected_time; //used in alignment logic bool get_recv_buffs(vrt_packet_handler::managed_recv_buffs_t &buffs); - const std::vector<zero_copy_if::sptr> &xports; + std::vector<zero_copy_if::sptr> &dsp_xports; + + //mappings from channel index to dsp xport + std::vector<size_t> send_map, recv_map; //timeouts set on calls to recv/send (passed into get buffs methods) double recv_timeout, send_timeout; @@ -204,7 +209,7 @@ struct usrp2_impl::io_impl{ vrt_packet_handler::send_state packet_handler_send_state; //methods and variables for the pirate crew - void recv_pirate_loop(zero_copy_if::sptr, usrp2_mboard_impl::sptr, size_t); + void recv_pirate_loop(usrp2_mboard_impl::sptr, zero_copy_if::sptr, size_t); boost::thread_group recv_pirate_crew; bool recv_pirate_crew_raiding; bounded_buffer<async_metadata_t> async_msg_fifo; @@ -218,17 +223,18 @@ struct usrp2_impl::io_impl{ * - put async message packets into queue **********************************************************************/ void usrp2_impl::io_impl::recv_pirate_loop( - zero_copy_if::sptr zc_if_err0, - usrp2_mboard_impl::sptr mboard, - size_t index + usrp2_mboard_impl::sptr mboard, zero_copy_if::sptr err_xport, size_t index ){ set_thread_priority_safe(); recv_pirate_crew_raiding = true; spawn_mutex.unlock(); + //store a reference to the flow control monitor (offset by max dsps) + flow_control_monitor &fc_mon = *(this->fc_mons[index*usrp2_mboard_impl::MAX_NUM_DSPS]); + while(recv_pirate_crew_raiding){ - managed_recv_buffer::sptr buff = zc_if_err0->get_recv_buff(); + managed_recv_buffer::sptr buff = err_xport->get_recv_buff(); if (not buff.get()) continue; //ignore timeout/error buffers try{ @@ -253,7 +259,7 @@ void usrp2_impl::io_impl::recv_pirate_loop( //catch the flow control packets and react if (metadata.event_code == 0){ boost::uint32_t fc_word32 = (vrt_hdr + if_packet_info.num_header_words32)[1]; - this->fc_mons[index]->update_fc_condition(uhd::ntohx(fc_word32)); + fc_mon.update_fc_condition(uhd::ntohx(fc_word32)); continue; } @@ -276,27 +282,52 @@ void usrp2_impl::io_impl::recv_pirate_loop( **********************************************************************/ void usrp2_impl::io_init(void){ - //the assumption is that all data transports should be identical - const size_t send_frame_size = _data_transports.front()->get_send_frame_size(); - //create new io impl - _io_impl = UHD_PIMPL_MAKE(io_impl, (send_frame_size, _data_transports)); + _io_impl = UHD_PIMPL_MAKE(io_impl, (dsp_xports)); //create a new pirate thread for each zc if (yarr!!) - for (size_t i = 0; i < _data_transports.size(); i++){ + for (size_t i = 0; i < _mboards.size(); i++){ //lock the unlocked mutex (non-blocking) _io_impl->spawn_mutex.lock(); //spawn a new pirate to plunder the recv booty _io_impl->recv_pirate_crew.create_thread(boost::bind( &usrp2_impl::io_impl::recv_pirate_loop, - _io_impl.get(), _err0_transports.at(i), - _mboards.at(i), i + _io_impl.get(), _mboards.at(i), err_xports.at(i), i )); //block here until the spawned thread unlocks _io_impl->spawn_mutex.lock(); //exit loop iteration in an unlocked condition _io_impl->spawn_mutex.unlock(); } + + //update mapping here since it didnt b4 when io init not called first + update_xport_channel_mapping(); +} + +void usrp2_impl::update_xport_channel_mapping(void){ + if (_io_impl.get() == NULL) return; //not inited yet + + _io_impl->recv_map.clear(); + _io_impl->send_map.clear(); + + for (size_t i = 0; i < _mboards.size(); i++){ + + subdev_spec_t rx_subdev_spec = _mboards[i]->get_link()[MBOARD_PROP_RX_SUBDEV_SPEC].as<subdev_spec_t>(); + for (size_t j = 0; j < rx_subdev_spec.size(); j++){ + _io_impl->recv_map.push_back(i*usrp2_mboard_impl::MAX_NUM_DSPS+j); + //std::cout << "recv_map.back() " << _io_impl->recv_map.back() << std::endl; + } + + subdev_spec_t tx_subdev_spec = _mboards[i]->get_link()[MBOARD_PROP_TX_SUBDEV_SPEC].as<subdev_spec_t>(); + for (size_t j = 0; j < tx_subdev_spec.size(); j++){ + _io_impl->send_map.push_back(i*usrp2_mboard_impl::MAX_NUM_DSPS+j); + //std::cout << "send_map.back() " << _io_impl->send_map.back() << std::endl; + } + + } + + _io_impl->packet_handler_recv_state = vrt_packet_handler::recv_state(_io_impl->recv_map.size()); + _io_impl->packet_handler_send_state = vrt_packet_handler::send_state(_io_impl->send_map.size()); } /*********************************************************************** @@ -318,7 +349,7 @@ size_t usrp2_impl::get_max_send_samps_per_packet(void) const{ + vrt_send_header_offset_words32*sizeof(boost::uint32_t) - sizeof(vrt::if_packet_info_t().cid) //no class id ever used ; - const size_t bpp = _data_transports.front()->get_send_frame_size() - hdr_size; + const size_t bpp = dsp_xports.front()->get_send_frame_size() - hdr_size; return bpp/_tx_otw_type.get_sample_size(); } @@ -388,49 +419,50 @@ UHD_INLINE bool usrp2_impl::io_impl::get_recv_buffs( vrt_packet_handler::managed_recv_buffs_t &buffs ){ if (buffs.size() == 1){ - buffs[0] = xports[0]->get_recv_buff(recv_timeout); + buffs[0] = dsp_xports[recv_map[0]]->get_recv_buff(recv_timeout); if (buffs[0].get() == NULL) return false; bool clear, msg; time_spec_t time; //unused variables //call extract_packet_info to handle printing the overflows - extract_packet_info(buffs[0], this->prev_infos[0], time, clear, msg); + extract_packet_info(buffs[0], this->prev_infos[recv_map[0]], time, clear, msg); return true; } //-------------------- begin alignment logic ---------------------// + UHD_ASSERT_THROW(recv_map.size() == buffs.size()); boost::system_time exit_time = boost::get_system_time() + to_time_dur(recv_timeout); managed_recv_buffer::sptr buff_tmp; bool clear, msg; - time_spec_t expected_time; + size_t index; //If we did not enter this routine with an empty indexes set, //jump to after the clear so we can preserve the previous state. //This saves buffers from being lost when using non-blocking recv. - if (not indexes_to_do.empty()) goto skip_reset; + if (not indexes_to_do.empty()) goto skip_pop_initial; //respond to a clear by starting from scratch got_clear: indexes_to_do.reset(buffs.size()); - skip_reset: clear = false; //do an initial pop to load an initial sequence id - size_t index = indexes_to_do.front(); - buff_tmp = xports[index]->get_recv_buff(from_time_dur(exit_time - boost::get_system_time())); + index = indexes_to_do.front(); + buff_tmp = dsp_xports[recv_map[index]]->get_recv_buff(from_time_dur(exit_time - boost::get_system_time())); if (buff_tmp.get() == NULL) return false; - extract_packet_info(buff_tmp, this->prev_infos[index], expected_time, clear, msg); + extract_packet_info(buff_tmp, this->prev_infos[recv_map[index]], expected_time, clear, msg); if (clear) goto got_clear; buffs[index] = buff_tmp; if (msg) return handle_msg_packet(buffs, index); indexes_to_do.remove(index); + skip_pop_initial: //get an aligned set of elements from the buffers: while(not indexes_to_do.empty()){ //pop an element off for this index index = indexes_to_do.front(); - buff_tmp = xports[index]->get_recv_buff(from_time_dur(exit_time - boost::get_system_time())); + buff_tmp = dsp_xports[recv_map[index]]->get_recv_buff(from_time_dur(exit_time - boost::get_system_time())); if (buff_tmp.get() == NULL) return false; time_spec_t this_time; - extract_packet_info(buff_tmp, this->prev_infos[index], this_time, clear, msg); + extract_packet_info(buff_tmp, this->prev_infos[recv_map[index]], this_time, clear, msg); if (clear) goto got_clear; buffs[index] = buff_tmp; if (msg) return handle_msg_packet(buffs, index); @@ -468,13 +500,14 @@ size_t usrp2_impl::get_max_recv_samps_per_packet(void) const{ + sizeof(vrt::if_packet_info_t().tlr) //forced to have trailer - sizeof(vrt::if_packet_info_t().cid) //no class id ever used ; - const size_t bpp = _data_transports.front()->get_recv_frame_size() - hdr_size; + const size_t bpp = dsp_xports.front()->get_recv_frame_size() - hdr_size; return bpp/_rx_otw_type.get_sample_size(); } -static void handle_overflow(std::vector<usrp2_mboard_impl::sptr> &mboards, size_t chan){ +void usrp2_impl::handle_overflow(size_t chan){ std::cerr << "O" << std::flush; - mboards.at(chan/mboards.size())->handle_overflow(); + ldiv_t indexes = ldiv(chan, usrp2_mboard_impl::NUM_RX_DSPS); + _mboards.at(indexes.quot)->handle_overflow(indexes.rem); } size_t usrp2_impl::recv( @@ -491,6 +524,6 @@ size_t usrp2_impl::recv( _mboards.front()->get_master_clock_freq(), //master clock tick rate uhd::transport::vrt::if_hdr_unpack_be, _io_impl->get_recv_buffs_fcn, - boost::bind(&handle_overflow, boost::ref(_mboards), _1) + boost::bind(&usrp2_impl::handle_overflow, this, _1) ); } diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp index 92a7b2f93..40fc5098b 100644 --- a/host/lib/usrp/usrp2/mboard_impl.cpp +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -19,11 +19,11 @@ #include "usrp2_regs.hpp" #include "fw_common.h" #include <uhd/utils/safe_call.hpp> +#include <uhd/exception.hpp> #include <uhd/usrp/gps_ctrl.hpp> #include <uhd/usrp/misc_utils.hpp> #include <uhd/usrp/dsp_utils.hpp> #include <uhd/usrp/mboard_props.hpp> -#include <uhd/utils/assert.hpp> #include <uhd/utils/byteswap.hpp> #include <uhd/utils/algorithm.hpp> #include <boost/bind.hpp> @@ -35,35 +35,55 @@ static const size_t mimo_clock_sync_delay_cycles = 137; using namespace uhd; using namespace uhd::usrp; +using namespace uhd::transport; /*********************************************************************** - * Structors + * Helpers **********************************************************************/ -usrp2_mboard_impl::usrp2_mboard_impl( - size_t index, - transport::udp_simple::sptr ctrl_transport, - transport::zero_copy_if::sptr data_transport, - transport::zero_copy_if::sptr err0_transport, - const device_addr_t &device_args, - size_t recv_samps_per_packet -): - _index(index), - _iface(usrp2_iface::make(ctrl_transport)) -{ +static void init_xport(zero_copy_if::sptr xport){ //Send a small data packet so the usrp2 knows the udp source port. //This setup must happen before further initialization occurs //or the async update packets will cause ICMP destination unreachable. - transport::managed_send_buffer::sptr send_buff; static const boost::uint32_t data[2] = { uhd::htonx(boost::uint32_t(0 /* don't care seq num */)), uhd::htonx(boost::uint32_t(USRP2_INVALID_VRT_HEADER)) }; - send_buff = data_transport->get_send_buff(); - std::memcpy(send_buff->cast<void*>(), &data, sizeof(data)); - send_buff->commit(sizeof(data)); - send_buff = err0_transport->get_send_buff(); + + transport::managed_send_buffer::sptr send_buff = xport->get_send_buff(); std::memcpy(send_buff->cast<void*>(), &data, sizeof(data)); send_buff->commit(sizeof(data)); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +usrp2_mboard_impl::usrp2_mboard_impl( + const device_addr_t &device_addr, + size_t index, usrp2_impl &device +): + _index(index), _device(device), + _iface(usrp2_iface::make(udp_simple::make_connected( + device_addr["addr"], BOOST_STRINGIZE(USRP2_UDP_CTRL_PORT) + ))) +{ + //construct transports for dsp and async errors + std::cout << "Making transport for DSP0..." << std::endl; + device.dsp_xports.push_back(udp_zero_copy::make( + device_addr["addr"], BOOST_STRINGIZE(USRP2_UDP_DSP0_PORT), device_addr + )); + init_xport(device.dsp_xports.back()); + + std::cout << "Making transport for DSP1..." << std::endl; + device.dsp_xports.push_back(udp_zero_copy::make( + device_addr["addr"], BOOST_STRINGIZE(USRP2_UDP_DSP1_PORT), device_addr + )); + init_xport(device.dsp_xports.back()); + + std::cout << "Making transport for ERR0..." << std::endl; + device.err_xports.push_back(udp_zero_copy::make( + device_addr["addr"], BOOST_STRINGIZE(USRP2_UDP_ERR0_PORT), device_addr_t() + )); + init_xport(device.err_xports.back()); //contruct the interfaces to mboard perifs _clock_ctrl = usrp2_clock_ctrl::make(_iface); @@ -74,69 +94,33 @@ usrp2_mboard_impl::usrp2_mboard_impl( //if(_gps_ctrl->gps_detected()) std::cout << "GPS time: " << _gps_ctrl->get_time() << std::endl; - //TODO move to dsp impl... - //load the allowed decim/interp rates - //_USRP2_RATES = range(4, 128+1, 1) + range(130, 256+1, 2) + range(260, 512+1, 4) - _allowed_decim_and_interp_rates.clear(); - for (size_t i = 4; i <= 128; i+=1){ - _allowed_decim_and_interp_rates.push_back(i); - } - for (size_t i = 130; i <= 256; i+=2){ - _allowed_decim_and_interp_rates.push_back(i); - } - for (size_t i = 260; i <= 512; i+=4){ - _allowed_decim_and_interp_rates.push_back(i); - } - - //setup the vrt rx registers - _iface->poke32(_iface->regs.rx_ctrl_clear_overrun, 1); //reset - _iface->poke32(_iface->regs.rx_ctrl_nsamps_per_pkt, recv_samps_per_packet); - _iface->poke32(_iface->regs.rx_ctrl_nchannels, 1); - _iface->poke32(_iface->regs.rx_ctrl_vrt_header, 0 - | (0x1 << 28) //if data with stream id - | (0x1 << 26) //has trailer - | (0x3 << 22) //integer time other - | (0x1 << 20) //fractional time sample count - ); - _iface->poke32(_iface->regs.rx_ctrl_vrt_stream_id, usrp2_impl::RECV_SID); - _iface->poke32(_iface->regs.rx_ctrl_vrt_trailer, 0); - _iface->poke32(_iface->regs.time64_tps, size_t(get_master_clock_freq())); - - //init the tx control registers - _iface->poke32(_iface->regs.tx_ctrl_clear_state, 1); //reset - _iface->poke32(_iface->regs.tx_ctrl_num_chan, 0); //1 channel - _iface->poke32(_iface->regs.tx_ctrl_report_sid, usrp2_impl::ASYNC_SID); - _iface->poke32(_iface->regs.tx_ctrl_policy, U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET); + //init the dsp stuff (before setting update packets) + dsp_init(); //setting the cycles per update (disabled by default) - const double ups_per_sec = device_args.cast<double>("ups_per_sec", 0.0); + const double ups_per_sec = device_addr.cast<double>("ups_per_sec", 0.0); if (ups_per_sec > 0.0){ const size_t cycles_per_up = size_t(_clock_ctrl->get_master_clock_rate()/ups_per_sec); _iface->poke32(_iface->regs.tx_ctrl_cycles_per_up, U2_FLAG_TX_CTRL_UP_ENB | cycles_per_up); } //setting the packets per update (enabled by default) - const double ups_per_fifo = device_args.cast<double>("ups_per_fifo", 8.0); + size_t send_frame_size = device.dsp_xports[0]->get_send_frame_size(); + const double ups_per_fifo = device_addr.cast<double>("ups_per_fifo", 8.0); if (ups_per_fifo > 0.0){ - const size_t packets_per_up = size_t(usrp2_impl::sram_bytes/ups_per_fifo/data_transport->get_send_frame_size()); + const size_t packets_per_up = size_t(usrp2_impl::sram_bytes/ups_per_fifo/send_frame_size); _iface->poke32(_iface->regs.tx_ctrl_packets_per_up, U2_FLAG_TX_CTRL_UP_ENB | packets_per_up); } - //init the ddc - init_ddc_config(); - - //init the duc - init_duc_config(); - //initialize the clock configuration - if (device_args.has_key("mimo_mode")){ - if (device_args["mimo_mode"] == "master"){ + if (device_addr.has_key("mimo_mode")){ + if (device_addr["mimo_mode"] == "master"){ _mimo_clocking_mode_is_master = true; } - else if (device_args["mimo_mode"] == "slave"){ + else if (device_addr["mimo_mode"] == "slave"){ _mimo_clocking_mode_is_master = false; } - else throw std::runtime_error( + else throw uhd::value_error( "mimo_mode must be set to master or slave" ); } @@ -160,13 +144,18 @@ usrp2_mboard_impl::usrp2_mboard_impl( (*this)[MBOARD_PROP_RX_SUBDEV_SPEC] = subdev_spec_t(); (*this)[MBOARD_PROP_TX_SUBDEV_SPEC] = subdev_spec_t(); + //------------------------------------------------------------------ //This is a hack/fix for the lingering packet problem. stream_cmd_t stream_cmd(stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); - stream_cmd.num_samps = 1; - this->issue_ddc_stream_cmd(stream_cmd); - data_transport->get_recv_buff().get(); //recv with timeout for lingering - data_transport->get_recv_buff().get(); //recv with timeout for expected - _iface->poke32(_iface->regs.rx_ctrl_clear_overrun, 1); //resets sequence + for (size_t i = 0; i < NUM_RX_DSPS; i++){ + size_t index = device.dsp_xports.size() - NUM_RX_DSPS + i; + stream_cmd.num_samps = 1; + this->issue_ddc_stream_cmd(stream_cmd, i); + device.dsp_xports.at(index)->get_recv_buff(0.01).get(); //recv with timeout for lingering + device.dsp_xports.at(index)->get_recv_buff(0.01).get(); //recv with timeout for expected + _iface->poke32(_iface->regs.rx_ctrl[i].clear_overrun, 1); //resets sequence + } + //------------------------------------------------------------------ } usrp2_mboard_impl::~usrp2_mboard_impl(void){ @@ -191,14 +180,14 @@ void usrp2_mboard_impl::update_clock_config(void){ //translate pps source enums switch(_clock_config.pps_source){ case clock_config_t::PPS_SMA: pps_flags |= U2_FLAG_TIME64_PPS_SMA; break; - default: throw std::runtime_error("unhandled clock configuration pps source"); + default: throw uhd::value_error("unhandled clock configuration pps source"); } //translate pps polarity enums switch(_clock_config.pps_polarity){ case clock_config_t::PPS_POS: pps_flags |= U2_FLAG_TIME64_PPS_POSEDGE; break; case clock_config_t::PPS_NEG: pps_flags |= U2_FLAG_TIME64_PPS_NEGEDGE; break; - default: throw std::runtime_error("unhandled clock configuration pps polarity"); + default: throw uhd::value_error("unhandled clock configuration pps polarity"); } //set the pps flags @@ -211,7 +200,7 @@ void usrp2_mboard_impl::update_clock_config(void){ switch(_clock_config.ref_source){ case clock_config_t::REF_INT : _iface->poke32(_iface->regs.misc_ctrl_clock, 0x12); break; case clock_config_t::REF_SMA : _iface->poke32(_iface->regs.misc_ctrl_clock, 0x1C); break; - default: throw std::runtime_error("unhandled clock configuration reference source"); + default: throw uhd::value_error("unhandled clock configuration reference source"); } _clock_ctrl->enable_external_ref(true); //USRP2P has an internal 10MHz TCXO break; @@ -221,7 +210,7 @@ void usrp2_mboard_impl::update_clock_config(void){ switch(_clock_config.ref_source){ case clock_config_t::REF_INT : _iface->poke32(_iface->regs.misc_ctrl_clock, 0x10); break; case clock_config_t::REF_SMA : _iface->poke32(_iface->regs.misc_ctrl_clock, 0x1C); break; - default: throw std::runtime_error("unhandled clock configuration reference source"); + default: throw uhd::value_error("unhandled clock configuration reference source"); } _clock_ctrl->enable_external_ref(_clock_config.ref_source != clock_config_t::REF_INT); break; @@ -275,19 +264,6 @@ void usrp2_mboard_impl::set_time_spec(const time_spec_t &time_spec, bool now){ _iface->poke32(_iface->regs.time64_secs, boost::uint32_t(time_spec.get_full_secs())); } -void usrp2_mboard_impl::handle_overflow(void){ - if (_continuous_streaming){ //re-issue the stream command if already continuous - this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS); - } -} - -void usrp2_mboard_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd){ - _continuous_streaming = stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS; - _iface->poke32(_iface->regs.rx_ctrl_stream_cmd, dsp_type1::calc_stream_cmd_word(stream_cmd)); - _iface->poke32(_iface->regs.rx_ctrl_time_secs, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); - _iface->poke32(_iface->regs.rx_ctrl_time_ticks, stream_cmd.time_spec.get_tick_count(get_master_clock_freq())); -} - /*********************************************************************** * MBoard Get Properties **********************************************************************/ @@ -324,21 +300,19 @@ void usrp2_mboard_impl::get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_RX_DSP: - UHD_ASSERT_THROW(key.name == ""); - val = _rx_dsp_proxy->get_link(); + val = _rx_dsp_proxies[key.name]->get_link(); return; case MBOARD_PROP_RX_DSP_NAMES: - val = prop_names_t(1, ""); + val = _rx_dsp_proxies.keys(); return; case MBOARD_PROP_TX_DSP: - UHD_ASSERT_THROW(key.name == ""); - val = _tx_dsp_proxy->get_link(); + val = _tx_dsp_proxies[key.name]->get_link(); return; case MBOARD_PROP_TX_DSP_NAMES: - val = prop_names_t(1, ""); + val = _tx_dsp_proxies.keys(); return; case MBOARD_PROP_CLOCK_CONFIG: @@ -401,30 +375,32 @@ void usrp2_mboard_impl::set(const wax::obj &key, const wax::obj &val){ set_time_spec(val.as<time_spec_t>(), false); return; - case MBOARD_PROP_STREAM_CMD: - issue_ddc_stream_cmd(val.as<stream_cmd_t>()); - return; - case MBOARD_PROP_RX_SUBDEV_SPEC: _rx_subdev_spec = val.as<subdev_spec_t>(); verify_rx_subdev_spec(_rx_subdev_spec, this->get_link()); //sanity check - UHD_ASSERT_THROW(_rx_subdev_spec.size() == 1); + UHD_ASSERT_THROW(_rx_subdev_spec.size() <= NUM_RX_DSPS); //set the mux - _iface->poke32(_iface->regs.dsp_rx_mux, dsp_type1::calc_rx_mux_word( - _dboard_manager->get_rx_subdev(_rx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() - )); + for (size_t i = 0; i < _rx_subdev_spec.size(); i++){ + if (_rx_subdev_spec.size() >= 1) _iface->poke32(_iface->regs.dsp_rx[i].mux, dsp_type1::calc_rx_mux_word( + _dboard_manager->get_rx_subdev(_rx_subdev_spec[i].sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + } + _device.update_xport_channel_mapping(); return; case MBOARD_PROP_TX_SUBDEV_SPEC: _tx_subdev_spec = val.as<subdev_spec_t>(); verify_tx_subdev_spec(_tx_subdev_spec, this->get_link()); //sanity check - UHD_ASSERT_THROW(_tx_subdev_spec.size() == 1); + UHD_ASSERT_THROW(_tx_subdev_spec.size() <= NUM_TX_DSPS); //set the mux - _iface->poke32(_iface->regs.dsp_tx_mux, dsp_type1::calc_tx_mux_word( - _dboard_manager->get_tx_subdev(_tx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() - )); + for (size_t i = 0; i < _rx_subdev_spec.size(); i++){ + _iface->poke32(_iface->regs.dsp_tx_mux, dsp_type1::calc_tx_mux_word( + _dboard_manager->get_tx_subdev(_tx_subdev_spec[i].sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + } + _device.update_xport_channel_mapping(); return; case MBOARD_PROP_EEPROM_MAP: diff --git a/host/lib/usrp/usrp2/usrp2_iface.cpp b/host/lib/usrp/usrp2/usrp2_iface.cpp index bd1f5ccb5..e3827233b 100644 --- a/host/lib/usrp/usrp2/usrp2_iface.cpp +++ b/host/lib/usrp/usrp2/usrp2_iface.cpp @@ -18,8 +18,7 @@ #include "usrp2_regs.hpp" #include "fw_common.h" #include "usrp2_iface.hpp" -#include <uhd/utils/exception.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/types/dict.hpp> #include <boost/thread.hpp> #include <boost/foreach.hpp> @@ -27,7 +26,6 @@ #include <boost/assign/list_of.hpp> #include <boost/format.hpp> #include <boost/tokenizer.hpp> -#include <stdexcept> #include <algorithm> using namespace uhd; @@ -65,17 +63,13 @@ public: //check the fpga compatibility number const boost::uint32_t fpga_compat_num = this->peek32(this->regs.compat_num_rb); if (fpga_compat_num != USRP2_FPGA_COMPAT_NUM){ - throw std::runtime_error(str(boost::format( + throw uhd::runtime_error(str(boost::format( "Expected fpga compatibility number %d, but got %d:\n" "The fpga build is not compatible with the host code build." ) % int(USRP2_FPGA_COMPAT_NUM) % fpga_compat_num)); } } - ~usrp2_iface_impl(void){ - /* NOP */ - } - /*********************************************************************** * Peek and Poke **********************************************************************/ @@ -247,7 +241,7 @@ public: while(true){ size_t len = _ctrl_transport->recv(boost::asio::buffer(usrp2_ctrl_data_in_mem), CTRL_RECV_TIMEOUT); if(len >= sizeof(boost::uint32_t) and ntohl(ctrl_data_in->proto_ver) != USRP2_FW_COMPAT_NUM){ - throw std::runtime_error(str(boost::format( + throw uhd::runtime_error(str(boost::format( "Expected protocol compatibility number %d, but got %d:\n" "The firmware build is not compatible with the host code build." ) % int(USRP2_FW_COMPAT_NUM) % ntohl(ctrl_data_in->proto_ver))); @@ -258,7 +252,7 @@ public: if (len == 0) break; //timeout //didnt get seq or bad packet, continue looking... } - throw std::runtime_error("no control response"); + throw uhd::runtime_error("no control response"); } rev_type get_rev(void){ diff --git a/host/lib/usrp/usrp2/usrp2_iface.hpp b/host/lib/usrp/usrp2/usrp2_iface.hpp index ea42d019f..df53ec66a 100644 --- a/host/lib/usrp/usrp2/usrp2_iface.hpp +++ b/host/lib/usrp/usrp2/usrp2_iface.hpp @@ -19,8 +19,7 @@ #define INCLUDED_USRP2_IFACE_HPP #include <uhd/transport/udp_simple.hpp> -#include <uhd/types/serial.hpp> -#include <uhd/usrp/mboard_eeprom.hpp> +#include <uhd/usrp/mboard_iface.hpp> #include <boost/shared_ptr.hpp> #include <boost/utility.hpp> #include <boost/cstdint.hpp> @@ -39,10 +38,9 @@ typedef boost::function<std::string(void)> gps_recv_fn_t; * Provides a set of functions to implementation layer. * Including spi, peek, poke, control... */ -class usrp2_iface : public uhd::i2c_iface, boost::noncopyable{ +class usrp2_iface : public uhd::usrp::mboard_iface, boost::noncopyable{ public: typedef boost::shared_ptr<usrp2_iface> sptr; - /*! * Make a new usrp2 interface with the control transport. * \param ctrl_transport the udp transport object @@ -50,55 +48,6 @@ public: */ static sptr make(uhd::transport::udp_simple::sptr ctrl_transport); - /*! - * Write a register (32 bits) - * \param addr the address - * \param data the 32bit data - */ - virtual void poke32(boost::uint32_t addr, boost::uint32_t data) = 0; - - /*! - * Read a register (32 bits) - * \param addr the address - * \return the 32bit data - */ - virtual boost::uint32_t peek32(boost::uint32_t addr) = 0; - - /*! - * Write a register (16 bits) - * \param addr the address - * \param data the 16bit data - */ - virtual void poke16(boost::uint32_t addr, boost::uint16_t data) = 0; - - /*! - * Read a register (16 bits) - * \param addr the address - * \return the 16bit data - */ - virtual boost::uint16_t peek16(boost::uint32_t addr) = 0; - - /*! - * Perform an spi transaction. - * \param which_slave the slave device number - * \param config spi config args - * \param data the bits to write - * \param num_bits how many bits in data - * \param readback true to readback a value - * \return spi data if readback set - */ - virtual boost::uint32_t transact_spi( - int which_slave, - const uhd::spi_config_t &config, - boost::uint32_t data, - size_t num_bits, - bool readback - ) = 0; - - virtual void write_uart(boost::uint8_t dev, const std::string &buf) = 0; - - virtual std::string read_uart(boost::uint8_t dev) = 0; - virtual gps_recv_fn_t get_gps_read_fn(void) = 0; virtual gps_send_fn_t get_gps_write_fn(void) = 0; diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp index 8fd88e01d..96552929a 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.cpp +++ b/host/lib/usrp/usrp2/usrp2_impl.cpp @@ -17,20 +17,21 @@ #include "usrp2_impl.hpp" #include "fw_common.h" +#include <uhd/exception.hpp> #include <uhd/transport/if_addrs.hpp> #include <uhd/transport/udp_zero_copy.hpp> #include <uhd/usrp/device_props.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/warning.hpp> -#include <boost/algorithm/string.hpp> //for split +#include <uhd/utils/byteswap.hpp> #include <boost/assign/list_of.hpp> #include <boost/format.hpp> #include <boost/foreach.hpp> #include <boost/lexical_cast.hpp> -#include <boost/regex.hpp> #include <boost/bind.hpp> -#include <boost/asio.hpp> //htonl and ntohl +#include <boost/asio/ip/address_v4.hpp> +#include <boost/asio.hpp> //used for htonl and ntohl #include <iostream> #include <vector> @@ -40,76 +41,21 @@ using namespace uhd::transport; namespace asio = boost::asio; /*********************************************************************** - * Helper Functions - **********************************************************************/ -template <class T> std::string num2str(T num){ - return boost::lexical_cast<std::string>(num); -} - -//! separate indexed device addresses into a vector of device addresses -device_addrs_t sep_indexed_dev_addrs(const device_addr_t &dev_addr){ - //------------ support old deprecated way and print warning -------- - if (dev_addr.has_key("addr") and not dev_addr["addr"].empty()){ - std::vector<std::string> addrs; boost::split(addrs, dev_addr["addr"], boost::is_any_of(" ")); - if (addrs.size() > 1){ - device_addr_t fixed_dev_addr = dev_addr; - fixed_dev_addr.pop("addr"); - for (size_t i = 0; i < addrs.size(); i++){ - fixed_dev_addr[str(boost::format("addr%d") % i)] = addrs[i]; - } - uhd::warning::post( - "addr = <space separated list of ip addresses> is deprecated.\n" - "To address a multi-device, use multiple <key><index> = <val>.\n" - "See the USRP-NXXX application notes. Two device example:\n" - " addr0 = 192.168.10.2\n" - " addr1 = 192.168.10.3\n" - ); - return sep_indexed_dev_addrs(fixed_dev_addr); - } - } - //------------------------------------------------------------------ - device_addrs_t dev_addrs; - BOOST_FOREACH(const std::string &key, dev_addr.keys()){ - boost::cmatch matches; - if (not boost::regex_match(key.c_str(), matches, boost::regex("^(\\D+)(\\d*)$"))){ - throw std::runtime_error("unknown key format: " + key); - } - std::string key_part(matches[1].first, matches[1].second); - std::string num_part(matches[2].first, matches[2].second); - size_t num = (num_part.empty())? 0 : boost::lexical_cast<size_t>(num_part); - dev_addrs.resize(std::max(num+1, dev_addrs.size())); - dev_addrs[num][key_part] = dev_addr[key]; - } - return dev_addrs; -} - -//! combine a vector in device addresses into an indexed device address -device_addr_t combine_dev_addr_vector(const device_addrs_t &dev_addrs){ - device_addr_t dev_addr; - for (size_t i = 0; i < dev_addrs.size(); i++){ - BOOST_FOREACH(const std::string &key, dev_addrs[i].keys()){ - dev_addr[str(boost::format("%s%d") % key % i)] = dev_addrs[i][key]; - } - } - return dev_addr; -} - -/*********************************************************************** * Discovery over the udp transport **********************************************************************/ static device_addrs_t usrp2_find(const device_addr_t &hint_){ //handle the multi-device discovery - device_addrs_t hints = sep_indexed_dev_addrs(hint_); + device_addrs_t hints = separate_device_addr(hint_); if (hints.size() > 1){ device_addrs_t found_devices; BOOST_FOREACH(const device_addr_t &hint_i, hints){ device_addrs_t found_devices_i = usrp2_find(hint_i); - if (found_devices_i.size() != 1) throw std::runtime_error(str(boost::format( + if (found_devices_i.size() != 1) throw uhd::value_error(str(boost::format( "Could not resolve device hint \"%s\" to a single device." ) % hint_i.to_string())); found_devices.push_back(found_devices_i[0]); } - return device_addrs_t(1, combine_dev_addr_vector(found_devices)); + return device_addrs_t(1, combine_device_addrs(found_devices)); } //initialize the hint for a single device case @@ -148,8 +94,8 @@ static device_addrs_t usrp2_find(const device_addr_t &hint_){ //send a hello control packet usrp2_ctrl_data_t ctrl_data_out; - ctrl_data_out.proto_ver = htonl(USRP2_FW_COMPAT_NUM); - ctrl_data_out.id = htonl(USRP2_CTRL_ID_WAZZUP_BRO); + ctrl_data_out.proto_ver = uhd::htonx<boost::uint32_t>(USRP2_FW_COMPAT_NUM); + ctrl_data_out.id = uhd::htonx<boost::uint32_t>(USRP2_CTRL_ID_WAZZUP_BRO); udp_transport->send(boost::asio::buffer(&ctrl_data_out, sizeof(ctrl_data_out))); //loop and recieve until the timeout @@ -168,9 +114,9 @@ static device_addrs_t usrp2_find(const device_addr_t &hint_){ //This operation can throw due to compatibility mismatch. //In this case, the discovered device will be ignored. try{ - mboard_eeprom_t mb_eeprom = usrp2_iface::make( - udp_simple::make_connected(new_addr["addr"], num2str(USRP2_UDP_CTRL_PORT)) - )->mb_eeprom; + mboard_eeprom_t mb_eeprom = usrp2_iface::make(udp_simple::make_connected( + new_addr["addr"], boost::lexical_cast<std::string>(USRP2_UDP_CTRL_PORT) + ))->mb_eeprom; new_addr["name"] = mb_eeprom["name"]; new_addr["serial"] = mb_eeprom["serial"]; if ( @@ -199,57 +145,111 @@ static device_addrs_t usrp2_find(const device_addr_t &hint_){ * Make **********************************************************************/ static device::sptr usrp2_make(const device_addr_t &device_addr){ + return device::sptr(new usrp2_impl(device_addr)); +} - //setup the dsp transport hints (default to a large recv buff) - device_addr_t dsp_xport_hints = device_addr; - if (not dsp_xport_hints.has_key("recv_buff_size")){ - //only enable on platforms that are happy with the large buffer resize - #if defined(UHD_PLATFORM_LINUX) || defined(UHD_PLATFORM_WIN32) - //set to half-a-second of buffering at max rate - dsp_xport_hints["recv_buff_size"] = "50e6"; - #endif /*defined(UHD_PLATFORM_LINUX) || defined(UHD_PLATFORM_WIN32)*/ - } +UHD_STATIC_BLOCK(register_usrp2_device){ + device::register_device(&usrp2_find, &usrp2_make); +} - //create a ctrl and data transport for each address - std::vector<udp_simple::sptr> ctrl_transports; - std::vector<zero_copy_if::sptr> data_transports; - std::vector<zero_copy_if::sptr> err0_transports; - const device_addrs_t device_addrs = sep_indexed_dev_addrs(device_addr); +/*********************************************************************** + * MTU Discovery + **********************************************************************/ +struct mtu_result_t{ + size_t recv_mtu, send_mtu; +}; + +static mtu_result_t determine_mtu(const std::string &addr){ + udp_simple::sptr udp_sock = udp_simple::make_connected( + addr, BOOST_STRINGIZE(USRP2_UDP_CTRL_PORT) + ); + + //The FPGA offers 4K buffers, and the user may manually request this. + //However, multiple simultaneous receives (2DSP slave + 2DSP master), + //require that buffering to be used internally, and this is a safe setting. + boost::uint8_t buffer[2000]; + usrp2_ctrl_data_t *ctrl_data = reinterpret_cast<usrp2_ctrl_data_t *>(buffer); + static const double echo_timeout = 0.020; //20 ms + + size_t min_recv_mtu = sizeof(usrp2_ctrl_data_t), max_recv_mtu = sizeof(buffer); + size_t min_send_mtu = sizeof(usrp2_ctrl_data_t), max_send_mtu = sizeof(buffer); + + while (min_recv_mtu < max_recv_mtu){ + + size_t test_mtu = (max_recv_mtu/2 + min_recv_mtu/2 + 3) & ~3; + //std::cout << "recv_mtu " << mtu.recv_mtu << std::endl; + + ctrl_data->id = htonl(USRP2_CTRL_ID_HOLLER_AT_ME_BRO); + ctrl_data->proto_ver = htonl(USRP2_FW_COMPAT_NUM); + ctrl_data->data.echo_args.len = htonl(test_mtu); + udp_sock->send(boost::asio::buffer(buffer, sizeof(usrp2_ctrl_data_t))); + + size_t len = udp_sock->recv(boost::asio::buffer(buffer), echo_timeout); + + if (len >= test_mtu) min_recv_mtu = test_mtu; + else max_recv_mtu = test_mtu - 4; - BOOST_FOREACH(const device_addr_t &dev_addr_i, device_addrs){ - ctrl_transports.push_back(udp_simple::make_connected( - dev_addr_i["addr"], num2str(USRP2_UDP_CTRL_PORT) - )); - data_transports.push_back(udp_zero_copy::make( - dev_addr_i["addr"], num2str(USRP2_UDP_DATA_PORT), dsp_xport_hints - )); - err0_transports.push_back(udp_zero_copy::make( - dev_addr_i["addr"], num2str(USRP2_UDP_ERR0_PORT), device_addr_t() - )); } - //create the usrp2 implementation guts - return device::sptr(new usrp2_impl( - ctrl_transports, data_transports, err0_transports, device_addrs - )); -} + while (min_send_mtu < max_send_mtu){ -UHD_STATIC_BLOCK(register_usrp2_device){ - device::register_device(&usrp2_find, &usrp2_make); + size_t test_mtu = (max_send_mtu/2 + min_send_mtu/2 + 3) & ~3; + //std::cout << "send_mtu " << mtu.send_mtu << std::endl; + + ctrl_data->id = htonl(USRP2_CTRL_ID_HOLLER_AT_ME_BRO); + ctrl_data->proto_ver = htonl(USRP2_FW_COMPAT_NUM); + ctrl_data->data.echo_args.len = htonl(sizeof(usrp2_ctrl_data_t)); + udp_sock->send(boost::asio::buffer(buffer, test_mtu)); + + size_t len = udp_sock->recv(boost::asio::buffer(buffer), echo_timeout); + if (len >= sizeof(usrp2_ctrl_data_t)) len = ntohl(ctrl_data->data.echo_args.len); + + if (len >= test_mtu) min_send_mtu = test_mtu; + else max_send_mtu = test_mtu - 4; + } + + mtu_result_t mtu; + mtu.recv_mtu = min_recv_mtu; + mtu.send_mtu = min_send_mtu; + return mtu; } /*********************************************************************** * Structors **********************************************************************/ -usrp2_impl::usrp2_impl( - std::vector<udp_simple::sptr> ctrl_transports, - std::vector<zero_copy_if::sptr> data_transports, - std::vector<zero_copy_if::sptr> err0_transports, - const device_addrs_t &device_args -): - _data_transports(data_transports), - _err0_transports(err0_transports) -{ +usrp2_impl::usrp2_impl(const device_addr_t &_device_addr){ + device_addr_t device_addr = _device_addr; + + //setup the dsp transport hints (default to a large recv buff) + if (not device_addr.has_key("recv_buff_size")){ + #if defined(UHD_PLATFORM_MACOS) || defined(UHD_PLATFORM_BSD) + //limit buffer resize on macos or it will error + device_addr["recv_buff_size"] = "1e6"; + #elif defined(UHD_PLATFORM_LINUX) || defined(UHD_PLATFORM_WIN32) + //set to half-a-second of buffering at max rate + device_addr["recv_buff_size"] = "50e6"; + #endif + } + + device_addrs_t device_args = separate_device_addr(device_addr); + + //calculate the minimum send and recv mtu of all devices + mtu_result_t mtu = determine_mtu(device_args[0]["addr"]); + for (size_t i = 1; i < device_args.size(); i++){ + mtu_result_t mtu_i = determine_mtu(device_args[i]["addr"]); + mtu.recv_mtu = std::min(mtu.recv_mtu, mtu_i.recv_mtu); + mtu.send_mtu = std::min(mtu.send_mtu, mtu_i.send_mtu); + } + + std::cout << "mtu recv bytes " << mtu.recv_mtu << std::endl; + std::cout << "mtu send bytes " << mtu.send_mtu << std::endl; + + //use the discovered mtu if not specified by the user + if (not device_addr.has_key("recv_frame_size")) + device_addr["recv_frame_size"] = boost::lexical_cast<std::string>(mtu.recv_mtu); + if (not device_addr.has_key("send_frame_size")) + device_addr["send_frame_size"] = boost::lexical_cast<std::string>(mtu.send_mtu); + //setup rx otw type _rx_otw_type.width = 16; _rx_otw_type.shift = 0; @@ -264,13 +264,16 @@ usrp2_impl::usrp2_impl( //create a new mboard handler for each control transport for(size_t i = 0; i < device_args.size(); i++){ - _mboards.push_back(usrp2_mboard_impl::sptr(new usrp2_mboard_impl( - i, ctrl_transports[i], data_transports[i], - err0_transports[i], device_args[i], - this->get_max_recv_samps_per_packet() - ))); + device_addr_t dev_addr_i = device_args[i]; + BOOST_FOREACH(const std::string &key, device_addr.keys()){ + if (dev_addr_i.has_key(key)) continue; + dev_addr_i[key] = device_addr[key]; + } + _mboards.push_back(usrp2_mboard_impl::sptr( + new usrp2_mboard_impl(dev_addr_i, i, *this) + )); //use an empty name when there is only one mboard - std::string name = (ctrl_transports.size() > 1)? boost::lexical_cast<std::string>(i) : ""; + std::string name = (device_args.size() > 1)? boost::lexical_cast<std::string>(i) : ""; _mboard_dict[name] = _mboards.back(); } diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp index 337f842d6..0676cecf2 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.hpp +++ b/host/lib/usrp/usrp2/usrp2_impl.hpp @@ -71,6 +71,8 @@ private: void set(const wax::obj &key, const wax::obj &val){return _set(key, val);} }; +class usrp2_impl; + /*! * USRP2 mboard implementation guts: * The implementation details are encapsulated here. @@ -80,14 +82,14 @@ class usrp2_mboard_impl : public wax::obj{ public: typedef boost::shared_ptr<usrp2_mboard_impl> sptr; + static const size_t NUM_RX_DSPS = 2; + static const size_t NUM_TX_DSPS = 1; + static const size_t MAX_NUM_DSPS = 2; + //structors usrp2_mboard_impl( - size_t index, - uhd::transport::udp_simple::sptr, - uhd::transport::zero_copy_if::sptr, - uhd::transport::zero_copy_if::sptr, - const uhd::device_addr_t &device_args, - size_t recv_samps_per_packet + const uhd::device_addr_t &device_addr, + size_t index, usrp2_impl &device ); ~usrp2_mboard_impl(void); @@ -95,11 +97,11 @@ public: return _clock_ctrl->get_master_clock_rate(); } - void handle_overflow(void); + void handle_overflow(size_t); private: size_t _index; - bool _continuous_streaming; + usrp2_impl &_device; bool _mimo_clocking_mode_is_master; //interfaces @@ -147,27 +149,20 @@ private: wax_obj_proxy::sptr _tx_dboard_proxy; uhd::usrp::dboard_eeprom_t _tx_db_eeprom; - //methods and shadows for the ddc dsp - std::vector<size_t> _allowed_decim_and_interp_rates; - size_t _ddc_decim; - double _ddc_freq; - void init_ddc_config(void); - void issue_ddc_stream_cmd(const uhd::stream_cmd_t &stream_cmd); - - //methods and shadows for the duc dsp - size_t _duc_interp; - double _duc_freq; - void init_duc_config(void); + //methods and shadows for the dsps + UHD_PIMPL_DECL(dsp_impl) _dsp_impl; + void dsp_init(void); + void issue_ddc_stream_cmd(const uhd::stream_cmd_t &, size_t); //properties interface for ddc - void ddc_get(const wax::obj &, wax::obj &); - void ddc_set(const wax::obj &, const wax::obj &); - wax_obj_proxy::sptr _rx_dsp_proxy; + void ddc_get(const wax::obj &, wax::obj &, size_t); + void ddc_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<std::string, wax_obj_proxy::sptr> _rx_dsp_proxies; //properties interface for duc - void duc_get(const wax::obj &, wax::obj &); - void duc_set(const wax::obj &, const wax::obj &); - wax_obj_proxy::sptr _tx_dsp_proxy; + void duc_get(const wax::obj &, wax::obj &, size_t); + void duc_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<std::string, wax_obj_proxy::sptr> _tx_dsp_proxies; }; @@ -182,19 +177,7 @@ public: static const boost::uint32_t RECV_SID = 1; static const boost::uint32_t ASYNC_SID = 2; - /*! - * Create a new usrp2 impl base. - * \param ctrl_transports the udp transports for control - * \param data_transports the udp transports for data - * \param err0_transports the udp transports for error - * \param device_args optional misc device parameters - */ - usrp2_impl( - std::vector<uhd::transport::udp_simple::sptr> ctrl_transports, - std::vector<uhd::transport::zero_copy_if::sptr> data_transports, - std::vector<uhd::transport::zero_copy_if::sptr> err0_transports, - const uhd::device_addrs_t &device_args - ); + usrp2_impl(const uhd::device_addr_t &); ~usrp2_impl(void); @@ -213,6 +196,14 @@ public: size_t get_max_recv_samps_per_packet(void) const; bool recv_async_msg(uhd::async_metadata_t &, double); + void update_xport_channel_mapping(void); + + //public frame sizes, set by mboard, used by io impl + size_t recv_frame_size, send_frame_size; + + std::vector<uhd::transport::zero_copy_if::sptr> dsp_xports; + std::vector<uhd::transport::zero_copy_if::sptr> err_xports; + private: //device properties interface void get(const wax::obj &, wax::obj &); @@ -223,11 +214,10 @@ private: uhd::dict<std::string, usrp2_mboard_impl::sptr> _mboard_dict; //io impl methods and members - std::vector<uhd::transport::zero_copy_if::sptr> _data_transports; - std::vector<uhd::transport::zero_copy_if::sptr> _err0_transports; uhd::otw_type_t _rx_otw_type, _tx_otw_type; UHD_PIMPL_DECL(io_impl) _io_impl; void io_init(void); + void handle_overflow(size_t); }; #endif /* INCLUDED_USRP2_IMPL_HPP */ diff --git a/host/lib/usrp/usrp2/usrp2_regs.cpp b/host/lib/usrp/usrp2/usrp2_regs.cpp index 84907c32e..66c3ac137 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.cpp +++ b/host/lib/usrp/usrp2/usrp2_regs.cpp @@ -38,8 +38,10 @@ usrp2_regs_t usrp2_get_regs(bool use_n2xx_map) { x.sr_udp_sm = 96; x.sr_tx_dsp = 208; x.sr_tx_ctrl = 224; - x.sr_rx_dsp = 160; - x.sr_rx_ctrl = 176; + x.sr_rx_dsp0 = 160; + x.sr_rx_ctrl0 = 176; + x.sr_rx_dsp1 = 240; + x.sr_rx_ctrl1 = 32; x.sr_time64 = 192; x.sr_simtimer = 198; x.sr_last = 255; @@ -68,12 +70,18 @@ usrp2_regs_t usrp2_get_regs(bool use_n2xx_map) { x.dsp_tx_scale_iq = sr_addr(misc_output_base, x.sr_tx_dsp + 1); x.dsp_tx_interp_rate = sr_addr(misc_output_base, x.sr_tx_dsp + 2); x.dsp_tx_mux = sr_addr(misc_output_base, x.sr_tx_dsp + 4); - x.dsp_rx_freq = sr_addr(misc_output_base, x.sr_rx_dsp + 0); - x.dsp_rx_scale_iq = sr_addr(misc_output_base, x.sr_rx_dsp + 1); - x.dsp_rx_decim_rate = sr_addr(misc_output_base, x.sr_rx_dsp + 2); - x.dsp_rx_dcoffset_i = sr_addr(misc_output_base, x.sr_rx_dsp + 3); - x.dsp_rx_dcoffset_q = sr_addr(misc_output_base, x.sr_rx_dsp + 4); - x.dsp_rx_mux = sr_addr(misc_output_base, x.sr_rx_dsp + 5); + x.dsp_rx[0].freq = sr_addr(misc_output_base, x.sr_rx_dsp0 + 0); + x.dsp_rx[0].scale_iq = sr_addr(misc_output_base, x.sr_rx_dsp0 + 1); + x.dsp_rx[0].decim_rate = sr_addr(misc_output_base, x.sr_rx_dsp0 + 2); + x.dsp_rx[0].dcoffset_i = sr_addr(misc_output_base, x.sr_rx_dsp0 + 3); + x.dsp_rx[0].dcoffset_q = sr_addr(misc_output_base, x.sr_rx_dsp0 + 4); + x.dsp_rx[0].mux = sr_addr(misc_output_base, x.sr_rx_dsp0 + 5); + x.dsp_rx[1].freq = sr_addr(misc_output_base, x.sr_rx_dsp1 + 0); + x.dsp_rx[1].scale_iq = sr_addr(misc_output_base, x.sr_rx_dsp1 + 1); + x.dsp_rx[1].decim_rate = sr_addr(misc_output_base, x.sr_rx_dsp1 + 2); + x.dsp_rx[1].dcoffset_i = sr_addr(misc_output_base, x.sr_rx_dsp1 + 3); + x.dsp_rx[1].dcoffset_q = sr_addr(misc_output_base, x.sr_rx_dsp1 + 4); + x.dsp_rx[1].mux = sr_addr(misc_output_base, x.sr_rx_dsp1 + 5); x.gpio_io = gpio_base + 0; x.gpio_ddr = gpio_base + 4; x.gpio_tx_sel = gpio_base + 8; @@ -86,15 +94,24 @@ usrp2_regs_t usrp2_get_regs(bool use_n2xx_map) { x.atr_inrx_rxside = atr_base + 10; x.atr_full_txside = atr_base + 12; x.atr_full_rxside = atr_base + 14; - x.rx_ctrl_stream_cmd = sr_addr(misc_output_base, x.sr_rx_ctrl + 0); - x.rx_ctrl_time_secs = sr_addr(misc_output_base, x.sr_rx_ctrl + 1); - x.rx_ctrl_time_ticks = sr_addr(misc_output_base, x.sr_rx_ctrl + 2); - x.rx_ctrl_clear_overrun = sr_addr(misc_output_base, x.sr_rx_ctrl + 3); - x.rx_ctrl_vrt_header = sr_addr(misc_output_base, x.sr_rx_ctrl + 4); - x.rx_ctrl_vrt_stream_id = sr_addr(misc_output_base, x.sr_rx_ctrl + 5); - x.rx_ctrl_vrt_trailer = sr_addr(misc_output_base, x.sr_rx_ctrl + 6); - x.rx_ctrl_nsamps_per_pkt = sr_addr(misc_output_base, x.sr_rx_ctrl + 7); - x.rx_ctrl_nchannels = sr_addr(misc_output_base, x.sr_rx_ctrl + 8); + x.rx_ctrl[0].stream_cmd = sr_addr(misc_output_base, x.sr_rx_ctrl0 + 0); + x.rx_ctrl[0].time_secs = sr_addr(misc_output_base, x.sr_rx_ctrl0 + 1); + x.rx_ctrl[0].time_ticks = sr_addr(misc_output_base, x.sr_rx_ctrl0 + 2); + x.rx_ctrl[0].clear_overrun = sr_addr(misc_output_base, x.sr_rx_ctrl0 + 3); + x.rx_ctrl[0].vrt_header = sr_addr(misc_output_base, x.sr_rx_ctrl0 + 4); + x.rx_ctrl[0].vrt_stream_id = sr_addr(misc_output_base, x.sr_rx_ctrl0 + 5); + x.rx_ctrl[0].vrt_trailer = sr_addr(misc_output_base, x.sr_rx_ctrl0 + 6); + x.rx_ctrl[0].nsamps_per_pkt = sr_addr(misc_output_base, x.sr_rx_ctrl0 + 7); + x.rx_ctrl[0].nchannels = sr_addr(misc_output_base, x.sr_rx_ctrl0 + 8); + x.rx_ctrl[1].stream_cmd = sr_addr(misc_output_base, x.sr_rx_ctrl1 + 0); + x.rx_ctrl[1].time_secs = sr_addr(misc_output_base, x.sr_rx_ctrl1 + 1); + x.rx_ctrl[1].time_ticks = sr_addr(misc_output_base, x.sr_rx_ctrl1 + 2); + x.rx_ctrl[1].clear_overrun = sr_addr(misc_output_base, x.sr_rx_ctrl1 + 3); + x.rx_ctrl[1].vrt_header = sr_addr(misc_output_base, x.sr_rx_ctrl1 + 4); + x.rx_ctrl[1].vrt_stream_id = sr_addr(misc_output_base, x.sr_rx_ctrl1 + 5); + x.rx_ctrl[1].vrt_trailer = sr_addr(misc_output_base, x.sr_rx_ctrl1 + 6); + x.rx_ctrl[1].nsamps_per_pkt = sr_addr(misc_output_base, x.sr_rx_ctrl1 + 7); + x.rx_ctrl[1].nchannels = sr_addr(misc_output_base, x.sr_rx_ctrl1 + 8); x.tx_ctrl_num_chan = sr_addr(misc_output_base, x.sr_tx_ctrl + 0); x.tx_ctrl_clear_state = sr_addr(misc_output_base, x.sr_tx_ctrl + 1); x.tx_ctrl_report_sid = sr_addr(misc_output_base, x.sr_tx_ctrl + 2); diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp index 977b342cb..01f5ee65a 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.hpp +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -38,8 +38,10 @@ typedef struct { int sr_udp_sm; int sr_tx_dsp; int sr_tx_ctrl; - int sr_rx_dsp; - int sr_rx_ctrl; + int sr_rx_dsp0; + int sr_rx_ctrl0; + int sr_rx_dsp1; + int sr_rx_ctrl1; int sr_time64; int sr_simtimer; int sr_last; @@ -68,12 +70,14 @@ typedef struct { int dsp_tx_scale_iq; int dsp_tx_interp_rate; int dsp_tx_mux; - int dsp_rx_freq; - int dsp_rx_scale_iq; - int dsp_rx_decim_rate; - int dsp_rx_dcoffset_i; - int dsp_rx_dcoffset_q; - int dsp_rx_mux; + struct{ + int freq; + int scale_iq; + int decim_rate; + int dcoffset_i; + int dcoffset_q; + int mux; + } dsp_rx[2]; int gpio_base; int gpio_io; int gpio_ddr; @@ -88,15 +92,17 @@ typedef struct { int atr_inrx_rxside; int atr_full_txside; int atr_full_rxside; - int rx_ctrl_stream_cmd; - int rx_ctrl_time_secs; - int rx_ctrl_time_ticks; - int rx_ctrl_clear_overrun; - int rx_ctrl_vrt_header; - int rx_ctrl_vrt_stream_id; - int rx_ctrl_vrt_trailer; - int rx_ctrl_nsamps_per_pkt; - int rx_ctrl_nchannels; + struct{ + int stream_cmd; + int time_secs; + int time_ticks; + int clear_overrun; + int vrt_header; + int vrt_stream_id; + int vrt_trailer; + int nsamps_per_pkt; + int nchannels; + } rx_ctrl[2]; int tx_ctrl_num_chan; int tx_ctrl_clear_state; int tx_ctrl_report_sid; diff --git a/host/lib/usrp/usrp_e100/clock_ctrl.cpp b/host/lib/usrp/usrp_e100/clock_ctrl.cpp index e29fe18ce..aba630d88 100644 --- a/host/lib/usrp/usrp_e100/clock_ctrl.cpp +++ b/host/lib/usrp/usrp_e100/clock_ctrl.cpp @@ -17,7 +17,7 @@ #include "clock_ctrl.hpp" #include "ad9522_regs.hpp" -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <boost/cstdint.hpp> #include "usrp_e100_regs.hpp" //spi slave constants #include <boost/assign/list_of.hpp> @@ -158,7 +158,7 @@ static clock_settings_type get_clock_settings(double rate){ } } - throw std::runtime_error(str(boost::format( + throw uhd::value_error(str(boost::format( "USRP-E100 clock control: could not calculate settings for clock rate %fMHz" ) % (rate/1e6))); } @@ -302,7 +302,7 @@ public: _ad9522_regs.out4_cmos_configuration = (enb)? ad9522_regs_t::OUT4_CMOS_CONFIGURATION_A_ON : ad9522_regs_t::OUT4_CMOS_CONFIGURATION_OFF; - this->send_reg(0x0F0); + this->send_reg(0x0F4); this->latch_regs(); } @@ -409,10 +409,10 @@ private: void send_reg(boost::uint16_t addr){ boost::uint32_t reg = _ad9522_regs.get_write_reg(addr); //std::cout << "clock control write reg: " << std::hex << reg << std::endl; - _iface->transact_spi( + _iface->write_spi( UE_SPI_SS_AD9522, spi_config_t::EDGE_RISE, - reg, 24, false /*no rb*/ + reg, 24 ); } @@ -427,9 +427,9 @@ private: //wait for calibration done: static const boost::uint8_t addr = 0x01F; for (size_t ms10 = 0; ms10 < 100; ms10++){ - boost::uint32_t reg = _iface->transact_spi( + boost::uint32_t reg = _iface->read_spi( UE_SPI_SS_AD9522, spi_config_t::EDGE_RISE, - _ad9522_regs.get_read_reg(addr), 24, true /*rb*/ + _ad9522_regs.get_read_reg(addr), 24 ); _ad9522_regs.set_reg(addr, reg); if (_ad9522_regs.vco_calibration_finished) return; diff --git a/host/lib/usrp/usrp_e100/codec_ctrl.cpp b/host/lib/usrp/usrp_e100/codec_ctrl.cpp index b33c8ae65..50442546a 100644 --- a/host/lib/usrp/usrp_e100/codec_ctrl.cpp +++ b/host/lib/usrp/usrp_e100/codec_ctrl.cpp @@ -18,7 +18,7 @@ #include "codec_ctrl.hpp" #include "ad9862_regs.hpp" #include <uhd/types/dict.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/algorithm.hpp> #include <boost/cstdint.hpp> #include <boost/tuple/tuple.hpp> @@ -137,7 +137,7 @@ static const int mtpgw = 255; //maximum tx pga gain word void usrp_e100_codec_ctrl_impl::set_tx_pga_gain(double gain){ int gain_word = int(mtpgw*(gain - tx_pga_gain_range.start())/(tx_pga_gain_range.stop() - tx_pga_gain_range.start())); - _ad9862_regs.tx_pga_gain = std::clip(gain_word, 0, mtpgw); + _ad9862_regs.tx_pga_gain = uhd::clip(gain_word, 0, mtpgw); this->send_reg(16); } @@ -149,7 +149,7 @@ static const int mrpgw = 0x14; //maximum rx pga gain word void usrp_e100_codec_ctrl_impl::set_rx_pga_gain(double gain, char which){ int gain_word = int(mrpgw*(gain - rx_pga_gain_range.start())/(rx_pga_gain_range.stop() - rx_pga_gain_range.start())); - gain_word = std::clip(gain_word, 0, mrpgw); + gain_word = uhd::clip(gain_word, 0, mrpgw); switch(which){ case 'A': _ad9862_regs.rx_pga_a = gain_word; @@ -227,7 +227,7 @@ double usrp_e100_codec_ctrl_impl::read_aux_adc(aux_adc_t which){ case AUX_ADC_B1: return aux_adc_to_volts(_ad9862_regs.aux_adc_b1_9_2, _ad9862_regs.aux_adc_b1_1_0); case AUX_ADC_B2: return aux_adc_to_volts(_ad9862_regs.aux_adc_b2_9_2, _ad9862_regs.aux_adc_b2_1_0); } - UHD_ASSERT_THROW(false); + UHD_THROW_INVALID_CODE_PATH(); } /*********************************************************************** @@ -236,7 +236,7 @@ double usrp_e100_codec_ctrl_impl::read_aux_adc(aux_adc_t which){ void usrp_e100_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts){ //special case for aux dac d (aka sigma delta word) if (which == AUX_DAC_D){ - boost::uint16_t dac_word = std::clip(boost::math::iround(volts*0xfff/3.3), 0, 0xfff); + boost::uint16_t dac_word = uhd::clip(boost::math::iround(volts*0xfff/3.3), 0, 0xfff); _ad9862_regs.sig_delt_11_4 = boost::uint8_t(dac_word >> 4); _ad9862_regs.sig_delt_3_0 = boost::uint8_t(dac_word & 0xf); this->send_reg(42); @@ -245,7 +245,7 @@ void usrp_e100_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts){ } //calculate the dac word for aux dac a, b, c - boost::uint8_t dac_word = std::clip(boost::math::iround(volts*0xff/3.3), 0, 0xff); + boost::uint8_t dac_word = uhd::clip(boost::math::iround(volts*0xff/3.3), 0, 0xff); //setup a lookup table for the aux dac params (reg ref, reg addr) typedef boost::tuple<boost::uint8_t*, boost::uint8_t> dac_params_t; @@ -269,20 +269,20 @@ void usrp_e100_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts){ void usrp_e100_codec_ctrl_impl::send_reg(boost::uint8_t addr){ boost::uint32_t reg = _ad9862_regs.get_write_reg(addr); if (codec_debug) std::cout << "codec control write reg: " << std::hex << reg << std::endl; - _iface->transact_spi( + _iface->write_spi( UE_SPI_SS_AD9862, spi_config_t::EDGE_RISE, - reg, 16, false /*no rb*/ + reg, 16 ); } void usrp_e100_codec_ctrl_impl::recv_reg(boost::uint8_t addr){ boost::uint32_t reg = _ad9862_regs.get_read_reg(addr); if (codec_debug) std::cout << "codec control read reg: " << std::hex << reg << std::endl; - boost::uint32_t ret = _iface->transact_spi( + boost::uint32_t ret = _iface->read_spi( UE_SPI_SS_AD9862, spi_config_t::EDGE_RISE, - reg, 16, true /*rb*/ + reg, 16 ); if (codec_debug) std::cout << "codec control read ret: " << std::hex << ret << std::endl; _ad9862_regs.set_reg(addr, boost::uint16_t(ret)); diff --git a/host/lib/usrp/usrp_e100/codec_impl.cpp b/host/lib/usrp/usrp_e100/codec_impl.cpp index 0d91fb42c..ae198aaa5 100644 --- a/host/lib/usrp/usrp_e100/codec_impl.cpp +++ b/host/lib/usrp/usrp_e100/codec_impl.cpp @@ -16,7 +16,7 @@ // #include "usrp_e100_impl.hpp" -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/usrp/codec_props.hpp> #include <boost/bind.hpp> diff --git a/host/lib/usrp/usrp_e100/dboard_iface.cpp b/host/lib/usrp/usrp_e100/dboard_iface.cpp index e4c3856c9..4ee354486 100644 --- a/host/lib/usrp/usrp_e100/dboard_iface.cpp +++ b/host/lib/usrp/usrp_e100/dboard_iface.cpp @@ -21,7 +21,7 @@ #include "codec_ctrl.hpp" #include <uhd/usrp/dboard_iface.hpp> #include <uhd/types/dict.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <boost/assign/list_of.hpp> #include <linux/usrp_e.h> //i2c and spi constants @@ -235,7 +235,7 @@ static boost::uint32_t unit_to_otw_spi_dev(dboard_iface::unit_t unit){ case dboard_iface::UNIT_TX: return UE_SPI_SS_TX_DB; case dboard_iface::UNIT_RX: return UE_SPI_SS_RX_DB; } - throw std::invalid_argument("unknown unit type"); + UHD_THROW_INVALID_CODE_PATH(); } void usrp_e100_dboard_iface::write_spi( @@ -244,7 +244,7 @@ void usrp_e100_dboard_iface::write_spi( boost::uint32_t data, size_t num_bits ){ - _iface->transact_spi(unit_to_otw_spi_dev(unit), config, data, num_bits, false /*no rb*/); + _iface->write_spi(unit_to_otw_spi_dev(unit), config, data, num_bits); } boost::uint32_t usrp_e100_dboard_iface::read_write_spi( @@ -253,7 +253,7 @@ boost::uint32_t usrp_e100_dboard_iface::read_write_spi( boost::uint32_t data, size_t num_bits ){ - return _iface->transact_spi(unit_to_otw_spi_dev(unit), config, data, num_bits, true /*rb*/); + return _iface->read_spi(unit_to_otw_spi_dev(unit), config, data, num_bits); } /*********************************************************************** diff --git a/host/lib/usrp/usrp_e100/dboard_impl.cpp b/host/lib/usrp/usrp_e100/dboard_impl.cpp index b533c2657..0b89fed9f 100644 --- a/host/lib/usrp/usrp_e100/dboard_impl.cpp +++ b/host/lib/usrp/usrp_e100/dboard_impl.cpp @@ -17,7 +17,7 @@ #include "usrp_e100_impl.hpp" #include "usrp_e100_regs.hpp" -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/usrp/dboard_props.hpp> #include <uhd/usrp/subdev_props.hpp> #include <uhd/usrp/misc_utils.hpp> diff --git a/host/lib/usrp/usrp_e100/dsp_impl.cpp b/host/lib/usrp/usrp_e100/dsp_impl.cpp index 7d358a607..8d084f066 100644 --- a/host/lib/usrp/usrp_e100/dsp_impl.cpp +++ b/host/lib/usrp/usrp_e100/dsp_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -60,10 +60,6 @@ void usrp_e100_impl::rx_ddc_get(const wax::obj &key_, wax::obj &val){ val = _ddc_freq; return; - case DSP_PROP_FREQ_SHIFT_NAMES: - val = prop_names_t(1, ""); - return; - case DSP_PROP_CODEC_RATE: val = _clock_ctrl->get_fpga_clock_rate(); return; @@ -84,6 +80,10 @@ void usrp_e100_impl::rx_ddc_set(const wax::obj &key_, const wax::obj &val){ switch(key.as<dsp_prop_t>()){ + case DSP_PROP_STREAM_CMD: + issue_stream_cmd(val.as<stream_cmd_t>()); + return; + case DSP_PROP_FREQ_SHIFT:{ double new_freq = val.as<double>(); _iface->poke32(UE_REG_DSP_RX_FREQ, @@ -143,10 +143,6 @@ void usrp_e100_impl::tx_duc_get(const wax::obj &key_, wax::obj &val){ val = _duc_freq; return; - case DSP_PROP_FREQ_SHIFT_NAMES: - val = prop_names_t(1, ""); - return; - case DSP_PROP_CODEC_RATE: val = _clock_ctrl->get_fpga_clock_rate(); return; diff --git a/host/lib/usrp/usrp_e100/fpga_downloader.cpp b/host/lib/usrp/usrp_e100/fpga_downloader.cpp index c0013fcbd..018a120d6 100644 --- a/host/lib/usrp/usrp_e100/fpga_downloader.cpp +++ b/host/lib/usrp/usrp_e100/fpga_downloader.cpp @@ -16,14 +16,21 @@ // #include <uhd/config.hpp> -#include <uhd/utils/assert.hpp> +#ifdef UHD_DLL_EXPORTS +#include <uhd/exception.hpp> +#else //special case when this file is externally included +#include <stdexcept> +namespace uhd{ + typedef std::runtime_error os_error; + typedef std::runtime_error io_error; +} +#endif #include <iostream> #include <sstream> #include <fstream> #include <string> #include <cstdlib> -#include <stdexcept> #include <fcntl.h> #include <sys/types.h> @@ -88,7 +95,7 @@ gpio::gpio(unsigned int gpio_num, gpio_direction pin_direction) std::fstream export_file; export_file.open("/sys/class/gpio/export", std::ios::out); - if (not export_file.is_open()) throw std::runtime_error( + if (not export_file.is_open()) throw uhd::os_error( "Failed to open gpio export file." ); @@ -212,7 +219,7 @@ static void send_file_to_fpga(const std::string &file_name, gpio &error, gpio &d std::ifstream bitstream; bitstream.open(file_name.c_str(), std::ios::binary); - if (!bitstream.is_open()) throw std::runtime_error( + if (!bitstream.is_open()) throw uhd::os_error( "Coult not open the file: " + file_name ); diff --git a/host/lib/usrp/usrp_e100/mboard_impl.cpp b/host/lib/usrp/usrp_e100/mboard_impl.cpp index 0e08cd435..cec4fd0ad 100644 --- a/host/lib/usrp/usrp_e100/mboard_impl.cpp +++ b/host/lib/usrp/usrp_e100/mboard_impl.cpp @@ -17,9 +17,9 @@ #include "usrp_e100_impl.hpp" #include "usrp_e100_regs.hpp" +#include <uhd/exception.hpp> #include <uhd/usrp/dsp_utils.hpp> #include <uhd/usrp/misc_utils.hpp> -#include <uhd/utils/assert.hpp> #include <uhd/usrp/mboard_props.hpp> #include <boost/bind.hpp> #include <iostream> @@ -53,7 +53,7 @@ void usrp_e100_impl::update_clock_config(void){ switch(_clock_config.pps_polarity){ case clock_config_t::PPS_POS: pps_flags |= UE_FLAG_TIME64_PPS_POSEDGE; break; case clock_config_t::PPS_NEG: pps_flags |= UE_FLAG_TIME64_PPS_NEGEDGE; break; - default: throw std::runtime_error("unhandled clock configuration pps polarity"); + default: throw uhd::value_error("unhandled clock configuration pps polarity"); } //set the pps flags @@ -64,7 +64,7 @@ void usrp_e100_impl::update_clock_config(void){ case clock_config_t::REF_AUTO: _clock_ctrl->use_auto_ref(); break; case clock_config_t::REF_INT: _clock_ctrl->use_internal_ref(); break; case clock_config_t::REF_SMA: _clock_ctrl->use_auto_ref(); break; - default: throw std::runtime_error("unhandled clock configuration ref source"); + default: throw uhd::value_error("unhandled clock configuration ref source"); } } @@ -167,10 +167,6 @@ void usrp_e100_impl::mboard_set(const wax::obj &key, const wax::obj &val){ //handle the get request conditioned on the key switch(key.as<mboard_prop_t>()){ - case MBOARD_PROP_STREAM_CMD: - issue_stream_cmd(val.as<stream_cmd_t>()); - return; - case MBOARD_PROP_TIME_NOW: case MBOARD_PROP_TIME_PPS:{ time_spec_t time_spec = val.as<time_spec_t>(); diff --git a/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp b/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp index c13e880f3..ec0baf490 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp +++ b/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp @@ -17,7 +17,7 @@ #include "usrp_e100_iface.hpp" #include "usrp_e100_regs.hpp" -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <sys/ioctl.h> //ioctl #include <fcntl.h> //open, close #include <linux/usrp_e.h> //ioctl structures and constants @@ -37,7 +37,7 @@ class i2c_dev_iface : public i2c_iface{ public: i2c_dev_iface(const std::string &node){ if ((_node_fd = ::open(node.c_str(), O_RDWR)) < 0){ - throw std::runtime_error("Failed to open " + node); + throw uhd::io_error("Failed to open " + node); } } @@ -106,12 +106,9 @@ public: { //open the device node and check file descriptor if ((_node_fd = ::open(node.c_str(), O_RDWR)) < 0){ - throw std::runtime_error("Failed to open " + node); + throw uhd::io_error("Failed to open " + node); } - //very first thing, reset all the wishbone, always do first! - //disabled for now: this->poke32(UE_REG_CLEAR_GLOBAL, 0); - mb_eeprom = mboard_eeprom_t(get_i2c_dev_iface(), mboard_eeprom_t::MAP_E100); } @@ -127,7 +124,7 @@ public: boost::mutex::scoped_lock lock(_ctrl_mutex); if (::ioctl(_node_fd, request, mem) < 0){ - throw std::runtime_error(str( + throw uhd::os_error(str( boost::format("ioctl failed with request %d") % request )); } @@ -257,6 +254,14 @@ public: //unload the data return data.data; } + + void write_uart(boost::uint8_t, const std::string &) { + throw uhd::not_implemented_error("Unhandled command write_uart()"); + } + + std::string read_uart(boost::uint8_t) { + throw uhd::not_implemented_error("Unhandled command read_uart()"); + } private: int _node_fd; diff --git a/host/lib/usrp/usrp_e100/usrp_e100_iface.hpp b/host/lib/usrp/usrp_e100/usrp_e100_iface.hpp index 12283fb52..cb0ca2dd4 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_iface.hpp +++ b/host/lib/usrp/usrp_e100/usrp_e100_iface.hpp @@ -24,6 +24,7 @@ #include <boost/shared_ptr.hpp> #include <boost/utility.hpp> #include <boost/cstdint.hpp> +#include <uhd/usrp/mboard_iface.hpp> //////////////////////////////////////////////////////////////////////// // I2C addresses @@ -39,7 +40,7 @@ * Provides a set of functions to implementation layer. * Including spi, peek, poke, control... */ -class usrp_e100_iface : boost::noncopyable, public uhd::i2c_iface{ +class usrp_e100_iface : boost::noncopyable, public uhd::usrp::mboard_iface{ public: typedef boost::shared_ptr<usrp_e100_iface> sptr; @@ -67,51 +68,6 @@ public: //! Get the I2C interface for the I2C device node virtual uhd::i2c_iface &get_i2c_dev_iface(void) = 0; - /*! - * Write a register (32 bits) - * \param addr the address - * \param data the 32bit data - */ - virtual void poke32(boost::uint32_t addr, boost::uint32_t data) = 0; - - /*! - * Read a register (32 bits) - * \param addr the address - * \return the 32bit data - */ - virtual boost::uint32_t peek32(boost::uint32_t addr) = 0; - - /*! - * Write a register (16 bits) - * \param addr the address - * \param data the 16bit data - */ - virtual void poke16(boost::uint32_t addr, boost::uint16_t data) = 0; - - /*! - * Read a register (16 bits) - * \param addr the address - * \return the 16bit data - */ - virtual boost::uint16_t peek16(boost::uint32_t addr) = 0; - - /*! - * Perform an spi transaction. - * \param which_slave the slave device number - * \param config spi config args - * \param data the bits to write - * \param num_bits how many bits in data - * \param readback true to readback a value - * \return spi data if readback set - */ - virtual boost::uint32_t transact_spi( - int which_slave, - const uhd::spi_config_t &config, - boost::uint32_t data, - size_t num_bits, - bool readback - ) = 0; - //motherboard eeprom map structure uhd::usrp::mboard_eeprom_t mb_eeprom; }; diff --git a/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp b/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp index 40ea56466..a120c3303 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp +++ b/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -19,7 +19,7 @@ #include "usrp_e100_regs.hpp" #include <uhd/usrp/device_props.hpp> #include <uhd/usrp/mboard_props.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <uhd/utils/static.hpp> #include <uhd/utils/images.hpp> #include <uhd/utils/warning.hpp> @@ -53,7 +53,7 @@ static device_addrs_t usrp_e100_find(const device_addr_t &hint){ if (fs::exists(hint["node"])){ device_addr_t new_addr; new_addr["type"] = "usrp-e"; - new_addr["node"] = fs::system_complete(fs::path(hint["node"])).file_string(); + new_addr["node"] = fs::system_complete(fs::path(hint["node"])).string(); try{ usrp_e100_iface::sptr iface = usrp_e100_iface::make(new_addr["node"]); new_addr["name"] = iface->mb_eeprom["name"]; @@ -103,7 +103,7 @@ static device::sptr usrp_e100_make(const device_addr_t &device_addr){ size_t fpga_hash = 0; { std::ifstream file(usrp_e100_fpga_image.c_str()); - if (not file.good()) throw std::runtime_error( + if (not file.good()) throw uhd::io_error( "cannot open fpga file for read: " + usrp_e100_fpga_image ); do{ @@ -132,7 +132,7 @@ static device::sptr usrp_e100_make(const device_addr_t &device_addr){ //check that the compatibility is correct fpga_compat_num = iface->peek16(UE_REG_MISC_COMPAT); if (fpga_compat_num != USRP_E_COMPAT_NUM){ - throw std::runtime_error(str(boost::format( + throw uhd::runtime_error(str(boost::format( "Expected fpga compatibility number 0x%x, but got 0x%x:\n" "The fpga build is not compatible with the host code build." ) % USRP_E_COMPAT_NUM % fpga_compat_num)); diff --git a/host/lib/usrp/usrp_e100/usrp_e100_mmap_zero_copy.cpp b/host/lib/usrp/usrp_e100/usrp_e100_mmap_zero_copy.cpp index c155d426a..f4274dc5a 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_mmap_zero_copy.cpp +++ b/host/lib/usrp/usrp_e100/usrp_e100_mmap_zero_copy.cpp @@ -17,7 +17,7 @@ #include "usrp_e100_iface.hpp" #include <uhd/transport/zero_copy.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <linux/usrp_e.h> #include <sys/mman.h> //mmap #include <unistd.h> //getpagesize diff --git a/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp b/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp index a030462d0..1bcae64c7 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp +++ b/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp @@ -131,7 +131,6 @@ #define UE_REG_CLEAR_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(48) + (4*(n))) #define UE_REG_CLEAR_RX UE_REG_CLEAR_ADDR(0) #define UE_REG_CLEAR_TX UE_REG_CLEAR_ADDR(1) -#define UE_REG_CLEAR_GLOBAL UE_REG_CLEAR_ADDR(2) ///////////////////////////////////////////////// // DSP RX Regs diff --git a/host/lib/usrp/wrapper_utils.hpp b/host/lib/usrp/wrapper_utils.hpp deleted file mode 100644 index a7b5c5da6..000000000 --- a/host/lib/usrp/wrapper_utils.hpp +++ /dev/null @@ -1,66 +0,0 @@ -// -// Copyright 2010 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#ifndef INCLUDED_LIBUHD_USRP_WRAPPER_UTILS_HPP -#define INCLUDED_LIBUHD_USRP_WRAPPER_UTILS_HPP - -#include <uhd/wax.hpp> -#include <uhd/types/ranges.hpp> -#include <uhd/usrp/dsp_props.hpp> -#include <uhd/utils/warning.hpp> -#include <boost/format.hpp> -#include <cmath> - -static inline uhd::freq_range_t add_dsp_shift( - const uhd::freq_range_t &range, - wax::obj dsp -){ - double codec_rate = dsp[uhd::usrp::DSP_PROP_CODEC_RATE].as<double>(); - return uhd::freq_range_t(range.start() - codec_rate/2.0, range.stop() + codec_rate/2.0); -} - -static inline void do_samp_rate_warning_message( - double target_rate, - double actual_rate, - const std::string &xx -){ - static const double max_allowed_error = 1.0; //Sps - if (std::abs(target_rate - actual_rate) > max_allowed_error){ - uhd::warning::post(str(boost::format( - "The hardware does not support the requested %s sample rate:\n" - "Target sample rate: %f MSps\n" - "Actual sample rate: %f MSps\n" - ) % xx % (target_rate/1e6) % (actual_rate/1e6))); - } -} - -static inline void do_tune_freq_warning_message( - double target_freq, - double actual_freq, - const std::string &xx -){ - static const double max_allowed_error = 1.0; //Hz - if (std::abs(target_freq - actual_freq) > max_allowed_error){ - uhd::warning::post(str(boost::format( - "The hardware does not support the requested %s frequency:\n" - "Target frequency: %f MHz\n" - "Actual frequency: %f MHz\n" - ) % xx % (target_freq/1e6) % (actual_freq/1e6))); - } -} - -#endif /* INCLUDED_LIBUHD_USRP_WRAPPER_UTILS_HPP */ diff --git a/host/lib/utils/CMakeLists.txt b/host/lib/utils/CMakeLists.txt index a4d3b2db2..c0d99b37e 100644 --- a/host/lib/utils/CMakeLists.txt +++ b/host/lib/utils/CMakeLists.txt @@ -110,7 +110,6 @@ SET_SOURCE_FILES_PROPERTIES( # Append sources ######################################################################## LIBUHD_APPEND_SOURCES( - ${CMAKE_CURRENT_SOURCE_DIR}/assert.cpp ${CMAKE_CURRENT_SOURCE_DIR}/gain_group.cpp ${CMAKE_CURRENT_SOURCE_DIR}/images.cpp ${CMAKE_CURRENT_SOURCE_DIR}/load_modules.cpp diff --git a/host/lib/utils/assert.cpp b/host/lib/utils/assert.cpp deleted file mode 100644 index 7ace9024c..000000000 --- a/host/lib/utils/assert.cpp +++ /dev/null @@ -1,24 +0,0 @@ -// -// Copyright 2010 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include <uhd/utils/assert.hpp> - -using namespace uhd; - -assert_error::assert_error(const std::string &what) : std::runtime_error(what){ - /* NOP */ -} diff --git a/host/lib/utils/gain_group.cpp b/host/lib/utils/gain_group.cpp index 07aa21115..3af8a543d 100644 --- a/host/lib/utils/gain_group.cpp +++ b/host/lib/utils/gain_group.cpp @@ -18,7 +18,7 @@ #include <uhd/utils/gain_group.hpp> #include <uhd/types/dict.hpp> #include <uhd/utils/algorithm.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> #include <boost/foreach.hpp> #include <boost/bind.hpp> #include <algorithm> @@ -107,7 +107,7 @@ public: double gain_left_to_distribute = gain; BOOST_FOREACH(const gain_fcns_t &fcns, all_fcns){ const gain_range_t range = fcns.get_range(); - gain_bucket.push_back(floor_step(std::clip( + gain_bucket.push_back(floor_step(uhd::clip( gain_left_to_distribute, range.start(), range.stop() ), max_step)); gain_left_to_distribute -= gain_bucket.back(); @@ -131,7 +131,7 @@ public: //fill in the largest step sizes first that are less than the remainder BOOST_FOREACH(size_t i, indexes_step_size_dec){ const gain_range_t range = all_fcns.at(i).get_range(); - double additional_gain = floor_step(std::clip( + double additional_gain = floor_step(uhd::clip( gain_bucket.at(i) + gain_left_to_distribute, range.start(), range.stop() ), range.step()) - gain_bucket.at(i); gain_bucket.at(i) += additional_gain; @@ -167,7 +167,7 @@ private: //! get the gain function sets in order (highest priority first) std::vector<gain_fcns_t> get_all_fcns(void){ std::vector<gain_fcns_t> all_fcns; - BOOST_FOREACH(size_t key, std::sorted(_registry.keys())){ + BOOST_FOREACH(size_t key, uhd::sorted(_registry.keys())){ const std::vector<gain_fcns_t> &fcns = _registry[key]; all_fcns.insert(all_fcns.begin(), fcns.begin(), fcns.end()); } diff --git a/host/lib/utils/images.cpp b/host/lib/utils/images.cpp index 395e542c1..2b6c02772 100644 --- a/host/lib/utils/images.cpp +++ b/host/lib/utils/images.cpp @@ -16,9 +16,9 @@ // #include <uhd/utils/images.hpp> +#include <uhd/exception.hpp> #include <boost/foreach.hpp> #include <boost/filesystem.hpp> -#include <stdexcept> #include <vector> namespace fs = boost::filesystem; @@ -30,11 +30,11 @@ std::vector<fs::path> get_image_paths(void); //defined in paths.cpp **********************************************************************/ std::string uhd::find_image_path(const std::string &image_name){ if (fs::exists(image_name)){ - return fs::system_complete(image_name).file_string(); + return fs::system_complete(image_name).string(); } BOOST_FOREACH(const fs::path &path, get_image_paths()){ fs::path image_path = path / image_name; - if (fs::exists(image_path)) return image_path.file_string(); + if (fs::exists(image_path)) return image_path.string(); } - throw std::runtime_error("Could not find path for image: " + image_name); + throw uhd::io_error("Could not find path for image: " + image_name); } diff --git a/host/lib/utils/load_modules.cpp b/host/lib/utils/load_modules.cpp index fa9b22438..bee0d5304 100644 --- a/host/lib/utils/load_modules.cpp +++ b/host/lib/utils/load_modules.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,11 +16,11 @@ // #include <uhd/utils/static.hpp> +#include <uhd/exception.hpp> #include <boost/format.hpp> #include <boost/foreach.hpp> #include <boost/filesystem.hpp> #include <iostream> -#include <stdexcept> #include <string> #include <vector> @@ -33,7 +33,7 @@ namespace fs = boost::filesystem; #include <dlfcn.h> static void load_module(const std::string &file_name){ if (dlopen(file_name.c_str(), RTLD_LAZY) == NULL){ - throw std::runtime_error(str( + throw uhd::os_error(str( boost::format("dlopen failed to load \"%s\"") % file_name )); } @@ -45,7 +45,7 @@ static void load_module(const std::string &file_name){ #include <windows.h> static void load_module(const std::string &file_name){ if (LoadLibrary(file_name.c_str()) == NULL){ - throw std::runtime_error(str( + throw uhd::os_error(str( boost::format("LoadLibrary failed to load \"%s\"") % file_name )); } @@ -55,7 +55,7 @@ static void load_module(const std::string &file_name){ #ifdef HAVE_LOAD_MODULES_DUMMY static void load_module(const std::string &file_name){ - throw std::runtime_error(str( + throw uhd::not_implemented_error(str( boost::format("Module loading not supported: Cannot load \"%s\"") % file_name )); } @@ -72,7 +72,7 @@ static void load_module(const std::string &file_name){ */ static void load_module_path(const fs::path &path){ if (not fs::exists(path)){ - //std::cerr << boost::format("Module path \"%s\" not found.") % path.file_string() << std::endl; + //std::cerr << boost::format("Module path \"%s\" not found.") % path.string() << std::endl; return; } @@ -90,7 +90,7 @@ static void load_module_path(const fs::path &path){ //its not a directory, try to load it try{ - load_module(path.file_string()); + load_module(path.string()); } catch(const std::exception &err){ std::cerr << boost::format("Error: %s") % err.what() << std::endl; diff --git a/host/lib/utils/paths.cpp b/host/lib/utils/paths.cpp index 8d604d849..329695873 100644 --- a/host/lib/utils/paths.cpp +++ b/host/lib/utils/paths.cpp @@ -22,7 +22,6 @@ #include <boost/filesystem.hpp> #include <boost/foreach.hpp> #include <boost/bind.hpp> -#include <stdexcept> #include <string> #include <vector> diff --git a/host/lib/utils/thread_priority.cpp b/host/lib/utils/thread_priority.cpp index 18f372ec0..bd34055e8 100644 --- a/host/lib/utils/thread_priority.cpp +++ b/host/lib/utils/thread_priority.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -17,8 +17,8 @@ #include <uhd/utils/thread_priority.hpp> #include <uhd/utils/warning.hpp> +#include <uhd/exception.hpp> #include <boost/format.hpp> -#include <stdexcept> #include <iostream> bool uhd::set_thread_priority_safe(float priority, bool realtime){ @@ -59,13 +59,13 @@ static void check_priority_range(float priority){ //get the priority bounds for the selected policy int min_pri = sched_get_priority_min(policy); int max_pri = sched_get_priority_max(policy); - if (min_pri == -1 or max_pri == -1) throw std::runtime_error("error in sched_get_priority_min/max"); + if (min_pri == -1 or max_pri == -1) throw uhd::os_error("error in sched_get_priority_min/max"); //set the new priority and policy sched_param sp; sp.sched_priority = int(priority*(max_pri - min_pri)) + min_pri; int ret = pthread_setschedparam(pthread_self(), policy, &sp); - if (ret != 0) throw std::runtime_error("error in pthread_setschedparam"); + if (ret != 0) throw uhd::os_error("error in pthread_setschedparam"); } #endif /* HAVE_PTHREAD_SETSCHEDPARAM */ @@ -81,7 +81,7 @@ static void check_priority_range(float priority){ //set the priority class on the process int pri_class = (realtime)? REALTIME_PRIORITY_CLASS : NORMAL_PRIORITY_CLASS; if (SetPriorityClass(GetCurrentProcess(), pri_class) == 0) - throw std::runtime_error("error in SetPriorityClass"); + throw uhd::os_error("error in SetPriorityClass"); //scale the priority value to the constants int priorities[] = { @@ -92,7 +92,7 @@ static void check_priority_range(float priority){ //set the thread priority on the thread if (SetThreadPriority(GetCurrentThread(), priorities[pri_index]) == 0) - throw std::runtime_error("error in SetThreadPriority"); + throw uhd::os_error("error in SetThreadPriority"); } #endif /* HAVE_WIN_SETTHREADPRIORITY */ @@ -101,7 +101,7 @@ static void check_priority_range(float priority){ **********************************************************************/ #ifdef HAVE_LOAD_MODULES_DUMMY void uhd::set_thread_priority(float, bool){ - throw std::runtime_error("set thread priority not implemented"); + throw uhd::not_implemented_error("set thread priority not implemented"); } #endif /* HAVE_LOAD_MODULES_DUMMY */ diff --git a/host/lib/utils/warning.cpp b/host/lib/utils/warning.cpp index bc4c79b6e..6a94a0a2c 100644 --- a/host/lib/utils/warning.cpp +++ b/host/lib/utils/warning.cpp @@ -16,12 +16,12 @@ // #include <uhd/utils/warning.hpp> +#include <uhd/exception.hpp> #include <boost/tokenizer.hpp> #include <uhd/utils/static.hpp> #include <uhd/types/dict.hpp> #include <boost/foreach.hpp> #include <sstream> -#include <stdexcept> #include <iostream> #include <vector> @@ -76,7 +76,7 @@ void warning::register_handler( } warning::handler_t warning::unregister_handler(const std::string &name){ - if (not get_registry().has_key(name)) throw std::runtime_error( + if (not get_registry().has_key(name)) throw uhd::key_error( "The warning registry does not have a handler registered to " + name ); return get_registry().pop(name); diff --git a/host/lib/wax.cpp b/host/lib/wax.cpp index 0e2e82a3a..5f658acd8 100644 --- a/host/lib/wax.cpp +++ b/host/lib/wax.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,6 +16,7 @@ // #include <uhd/wax.hpp> +#include <uhd/exception.hpp> #include <boost/format.hpp> #include <stdexcept> @@ -97,7 +98,7 @@ wax::obj wax::obj::operator[](const obj &key){ return val.as<link_args_t>()()[key]; } //unknown obj - throw std::runtime_error("cannot use [] on non wax::obj link"); + throw uhd::type_error("cannot use [] on non wax::obj link"); } else{ return proxy_args_t(this, key); @@ -142,9 +143,9 @@ boost::any wax::obj::resolve(void) const{ } void wax::obj::get(const obj &, obj &){ - throw std::runtime_error("Cannot call get on wax obj base class"); + throw uhd::type_error("Cannot call get on wax obj base class"); } void wax::obj::set(const obj &, const obj &){ - throw std::runtime_error("Cannot call set on wax obj base class"); + throw uhd::type_error("Cannot call set on wax obj base class"); } diff --git a/host/tests/error_test.cpp b/host/tests/error_test.cpp index c76a15ab7..983f0150c 100644 --- a/host/tests/error_test.cpp +++ b/host/tests/error_test.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,19 +16,30 @@ // #include <boost/test/unit_test.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/assert_has.hpp> #include <vector> #include <iostream> +BOOST_AUTO_TEST_CASE(test_exception_methods){ + try{ + throw uhd::assertion_error("your assertion failed: 1 != 2"); + } + catch(const uhd::exception &e){ + std::cout << "what: " << e.what() << std::endl; + std::cout << "code: " << e.code() << std::endl; + } +} + BOOST_AUTO_TEST_CASE(test_assert_has){ std::vector<int> vec; vec.push_back(2); vec.push_back(3); vec.push_back(5); - //verify the std::has utility - BOOST_CHECK(std::has(vec, 2)); - BOOST_CHECK(not std::has(vec, 1)); + //verify the uhd::has utility + BOOST_CHECK(uhd::has(vec, 2)); + BOOST_CHECK(not uhd::has(vec, 1)); std::cout << "The output of the assert_has error:" << std::endl; try{ diff --git a/host/tests/tune_helper_test.cpp b/host/tests/tune_helper_test.cpp index 735e7e948..aabaaaf6e 100644 --- a/host/tests/tune_helper_test.cpp +++ b/host/tests/tune_helper_test.cpp @@ -153,10 +153,6 @@ private: val = _freq_shift; return; - case DSP_PROP_FREQ_SHIFT_NAMES: - val = prop_names_t(1, ""); - return; - default: UHD_THROW_PROP_GET_ERROR(); } } @@ -190,12 +186,12 @@ BOOST_AUTO_TEST_CASE(test_tune_helper_rx){ dummy_dsp dsp(100e6); std::cout << "Testing tune helper RX automatic IF offset" << std::endl; - tune_result_t tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.3451e9); + tune_result_t tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.3451e9); std::cout << tr.to_pp_string() << std::endl; BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.345e9, tolerance); BOOST_CHECK_CLOSE(tr.actual_dsp_freq, -100e3, tolerance); - double freq_derived = derive_freq_from_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0); + double freq_derived = derive_freq_from_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link()); BOOST_CHECK_CLOSE(freq_derived, 2.3451e9, tolerance); } @@ -204,12 +200,12 @@ BOOST_AUTO_TEST_CASE(test_tune_helper_tx){ dummy_dsp dsp(100e6); std::cout << "Testing tune helper TX automatic IF offset" << std::endl; - tune_result_t tr = tune_tx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.3451e9); + tune_result_t tr = tune_tx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.3451e9); std::cout << tr.to_pp_string() << std::endl; BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.345e9, tolerance); BOOST_CHECK_CLOSE(tr.actual_dsp_freq, 100e3, tolerance); - double freq_derived = derive_freq_from_tx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0); + double freq_derived = derive_freq_from_tx_subdev_and_dsp(subdev.get_link(), dsp.get_link()); BOOST_CHECK_CLOSE(freq_derived, 2.3451e9, tolerance); } @@ -218,12 +214,12 @@ BOOST_AUTO_TEST_CASE(test_tune_helper_rx_nyquist){ dummy_dsp dsp(100e6); std::cout << "Testing tune helper RX dummy basic board" << std::endl; - tune_result_t tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 55e6); + tune_result_t tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 55e6); std::cout << tr.to_pp_string() << std::endl; BOOST_CHECK_CLOSE(tr.actual_inter_freq, 0.0, tolerance); BOOST_CHECK_CLOSE(tr.actual_dsp_freq, 45e6, tolerance); - double freq_derived = derive_freq_from_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0); + double freq_derived = derive_freq_from_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link()); BOOST_CHECK_CLOSE(freq_derived, -45e6, tolerance); } @@ -235,21 +231,21 @@ BOOST_AUTO_TEST_CASE(test_tune_helper_rx_lo_off){ std::cout << "Testing tune helper RX automatic LO offset B >> fs" << std::endl; subdev[SUBDEV_PROP_BANDWIDTH] = double(40e6); dsp[DSP_PROP_HOST_RATE] = double(4e6); - tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.45e9); + tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.45e9); std::cout << tr.to_pp_string() << std::endl; BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.45e9+4e6/2, tolerance); std::cout << "Testing tune helper RX automatic LO offset B > fs" << std::endl; subdev[SUBDEV_PROP_BANDWIDTH] = double(40e6); dsp[DSP_PROP_HOST_RATE] = double(25e6); - tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.45e9); + tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.45e9); std::cout << tr.to_pp_string() << std::endl; BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.45e9+(40e6-25e6)/2, tolerance); std::cout << "Testing tune helper RX automatic LO offset B < fs" << std::endl; subdev[SUBDEV_PROP_BANDWIDTH] = double(20e6); dsp[DSP_PROP_HOST_RATE] = double(25e6); - tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 0, 2.45e9); + tr = tune_rx_subdev_and_dsp(subdev.get_link(), dsp.get_link(), 2.45e9); std::cout << tr.to_pp_string() << std::endl; BOOST_CHECK_CLOSE(tr.actual_inter_freq, 2.45e9, tolerance); } diff --git a/host/tests/wax_test.cpp b/host/tests/wax_test.cpp index 731f470ed..18730e0c2 100644 --- a/host/tests/wax_test.cpp +++ b/host/tests/wax_test.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -25,7 +25,7 @@ enum opt_b_t{OPTION_B_0, OPTION_B_1}; BOOST_AUTO_TEST_CASE(test_enums){ wax::obj opta = OPTION_A_0; - BOOST_CHECK_THROW(opta.as<opt_b_t>(), wax::bad_cast); + BOOST_CHECK_THROW(opta.as<opt_b_t>(), std::exception); BOOST_CHECK_EQUAL(opta.as<opt_a_t>(), OPTION_A_0); } diff --git a/host/usrp_e_utils/CMakeLists.txt b/host/usrp_e_utils/CMakeLists.txt index 1ecd2ac46..f3537e542 100644 --- a/host/usrp_e_utils/CMakeLists.txt +++ b/host/usrp_e_utils/CMakeLists.txt @@ -37,6 +37,7 @@ IF(ENABLE_USRP_E_UTILS) usrp-e-timed.c usrp-e-wb-test.cpp usrp-e-debug-pins.c + usrp-e-gpio.c usrp-e-i2c.c usrp-e-spi.c ) diff --git a/host/apps/omap_debug/usrp-e-gpio.c b/host/usrp_e_utils/usrp-e-gpio.c index adef877d3..7e4bc4e13 100644 --- a/host/apps/omap_debug/usrp-e-gpio.c +++ b/host/usrp_e_utils/usrp-e-gpio.c @@ -6,8 +6,8 @@ #include <string.h> #include <sys/ioctl.h> -#include "usrp_e.h" -#include "usrp_e_regs.hpp" +#include "linux/usrp_e.h" +#include "usrp_e100_regs.hpp" // Usage: usrp_e_gpio <string> diff --git a/host/usrp_e_utils/usrp-e-loopback.c b/host/usrp_e_utils/usrp-e-loopback.c index a63882475..0bd3d3100 100644 --- a/host/usrp_e_utils/usrp-e-loopback.c +++ b/host/usrp_e_utils/usrp-e-loopback.c @@ -38,11 +38,15 @@ static int calc_checksum(struct pkt *p) i = 0; sum = 0; - for (i=0; i < p->len; i++) - sum += p->data[i]; - - sum += p->seq_num; - sum += p->len; + if (p->len < 1016) { + for (i=0; i < p->len; i++) + sum += p->data[i]; + + sum += p->seq_num; + sum += p->len; + } else { + printf("Bad packet length = %d received.\n", p->len); + } return sum; } @@ -212,6 +216,11 @@ int main(int argc, char *argv[]) packet_data_length = atoi(argv[1]); + if (packet_data_length > 1016) { + packet_data_length = 1016; + printf("Max data length = 1016, clamping.\n"); + } + fp = open("/dev/usrp_e0", O_RDWR); printf("fp = %d\n", fp); diff --git a/host/utils/usrp_burn_db_eeprom.cpp b/host/utils/usrp_burn_db_eeprom.cpp index ac5608f22..617417e09 100644 --- a/host/utils/usrp_burn_db_eeprom.cpp +++ b/host/utils/usrp_burn_db_eeprom.cpp @@ -19,7 +19,7 @@ #include <uhd/utils/safe_main.hpp> #include <uhd/device.hpp> #include <uhd/types/dict.hpp> -#include <uhd/utils/assert.hpp> +#include <uhd/utils/assert_has.hpp> #include <uhd/usrp/dboard_eeprom.hpp> #include <uhd/usrp/device_props.hpp> #include <uhd/usrp/mboard_props.hpp> diff --git a/images/CMakeLists.txt b/images/CMakeLists.txt index 705153baf..baac333ea 100644 --- a/images/CMakeLists.txt +++ b/images/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2010 Ettus Research LLC +# Copyright 2010-2011 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -32,6 +32,7 @@ SET(CPACK_PACKAGE_CONTACT "support@ettus.com") SET(CPACK_PACKAGE_VERSION_MAJOR ${UHD_VERSION_MAJOR}) SET(CPACK_PACKAGE_VERSION_MINOR ${UHD_VERSION_MINOR}) SET(CPACK_PACKAGE_VERSION_PATCH ${UHD_VERSION_PATCH}) +SET(CPACK_PACKAGE_FILE_NAME "UHD-images-${UHD_VERSION_MAJOR}-${UHD_VERSION_MINOR}-${UHD_VERSION_PATCH}") SET(CPACK_DEBIAN_PACKAGE_ARCHITECTURE "all") INCLUDE(CPack) #include after setting vars MESSAGE(STATUS "Version: ${CPACK_PACKAGE_VERSION}") |