diff options
-rw-r--r-- | usrp2/control_lib/nsgpio.v | 2 | ||||
-rw-r--r-- | usrp2/sdr_lib/cordic_z24.v | 48 | ||||
-rw-r--r-- | usrp2/sdr_lib/dsp_core_rx.v | 10 | ||||
-rw-r--r-- | usrp2/top/u2_rev3/Makefile | 2 | ||||
-rw-r--r-- | usrp2/top/u2_rev3/u2_rev3.ucf | 2 | ||||
-rw-r--r-- | usrp2/top/u2_rev3/u2_rev3.v | 15 |
6 files changed, 47 insertions, 32 deletions
diff --git a/usrp2/control_lib/nsgpio.v b/usrp2/control_lib/nsgpio.v index 937ea7020..26130cc8e 100644 --- a/usrp2/control_lib/nsgpio.v +++ b/usrp2/control_lib/nsgpio.v @@ -95,7 +95,7 @@ module nsgpio integer n; reg [31:0] igpio; // temporary internal signal - always @(ctrl or line or debug_1 or debug_0 or atr) + always @(ctrl or line or debug_1 or debug_0 or atr or ddr) for(n=0;n<32;n=n+1) igpio[n] <= ddr[n] ? (ctrl[2*n+1] ? (ctrl[2*n] ? debug_1[n] : debug_0[n]) : (ctrl[2*n] ? atr[n] : line[n]) ) diff --git a/usrp2/sdr_lib/cordic_z24.v b/usrp2/sdr_lib/cordic_z24.v index cf668d5ec..97b7beaf7 100644 --- a/usrp2/sdr_lib/cordic_z24.v +++ b/usrp2/sdr_lib/cordic_z24.v @@ -45,30 +45,30 @@ module cordic_z24(clock, reset, enable, xi, yi, zi, xo, yo, zo ); // see gen_cordic_consts.py // constants for 24 bit wide phase - localparam c00 = 24'd2097152; - localparam c01 = 24'd1238021; - localparam c02 = 24'd654136; - localparam c03 = 24'd332050; - localparam c04 = 24'd166669; - localparam c05 = 24'd83416; - localparam c06 = 24'd41718; - localparam c07 = 24'd20860; - localparam c08 = 24'd10430; - localparam c09 = 24'd5215; - localparam c10 = 24'd2608; - localparam c11 = 24'd1304; - localparam c12 = 24'd652; - localparam c13 = 24'd326; - localparam c14 = 24'd163; - localparam c15 = 24'd81; - localparam c16 = 24'd41; - localparam c17 = 24'd20; - localparam c18 = 24'd10; - localparam c19 = 24'd5; - localparam c20 = 24'd3; - localparam c21 = 24'd1; - localparam c22 = 24'd1; - localparam c23 = 24'd0; + localparam c00 = 23'd2097152; + localparam c01 = 23'd1238021; + localparam c02 = 23'd654136; + localparam c03 = 23'd332050; + localparam c04 = 23'd166669; + localparam c05 = 23'd83416; + localparam c06 = 23'd41718; + localparam c07 = 23'd20860; + localparam c08 = 23'd10430; + localparam c09 = 23'd5215; + localparam c10 = 23'd2608; + localparam c11 = 23'd1304; + localparam c12 = 23'd652; + localparam c13 = 23'd326; + localparam c14 = 23'd163; + localparam c15 = 23'd81; + localparam c16 = 23'd41; + localparam c17 = 23'd20; + localparam c18 = 23'd10; + localparam c19 = 23'd5; + localparam c20 = 23'd3; + localparam c21 = 23'd1; + localparam c22 = 23'd1; + localparam c23 = 23'd0; always @(posedge clock) if(reset) diff --git a/usrp2/sdr_lib/dsp_core_rx.v b/usrp2/sdr_lib/dsp_core_rx.v index 2ac429630..1e689fc7f 100644 --- a/usrp2/sdr_lib/dsp_core_rx.v +++ b/usrp2/sdr_lib/dsp_core_rx.v @@ -32,6 +32,10 @@ module dsp_core_rx wire strobe_cic, strobe_hb1, strobe_hb2; wire enable_hb1, enable_hb2; wire [7:0] cic_decim_rate; + + wire [31:10] UNUSED_1; + wire [31:4] UNUSED_2; + wire [31:2] UNUSED_3; setting_reg #(.my_addr(BASE+0)) sr_0 (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), @@ -43,7 +47,7 @@ module dsp_core_rx setting_reg #(.my_addr(BASE+2)) sr_2 (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({enable_hb1, enable_hb2, cic_decim_rate}),.changed()); + .in(set_data),.out({UNUSED_1, enable_hb1, enable_hb2, cic_decim_rate}),.changed()); rx_dcoffset #(.WIDTH(14),.ADDR(BASE+3)) rx_dcoffset_a (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), @@ -56,12 +60,12 @@ module dsp_core_rx wire [3:0] muxctrl; setting_reg #(.my_addr(BASE+5)) sr_8 (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(muxctrl),.changed()); + .in(set_data),.out({UNUSED_2,muxctrl}),.changed()); wire [1:0] gpio_ena; setting_reg #(.my_addr(BASE+6)) sr_9 (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(gpio_ena),.changed()); + .in(set_data),.out({UNUSED_3,gpio_ena}),.changed()); // The TVRX connects to what is called adc_b, thus A and B are // swapped throughout the design. diff --git a/usrp2/top/u2_rev3/Makefile b/usrp2/top/u2_rev3/Makefile index 1fd8638d9..867fb5cab 100644 --- a/usrp2/top/u2_rev3/Makefile +++ b/usrp2/top/u2_rev3/Makefile @@ -199,7 +199,7 @@ top/u2_rev3/u2_rev3.v # Process Properties ################################################## export SYNTHESIZE_PROPERTIES := \ -"Number of Clock Buffers" 6 \ +"Number of Clock Buffers" 8 \ "Pack I/O Registers into IOBs" Yes \ "Optimization Effort" High \ "Optimize Instantiated Primitives" TRUE \ diff --git a/usrp2/top/u2_rev3/u2_rev3.ucf b/usrp2/top/u2_rev3/u2_rev3.ucf index 255a298ac..6aa699d2a 100644 --- a/usrp2/top/u2_rev3/u2_rev3.ucf +++ b/usrp2/top/u2_rev3/u2_rev3.ucf @@ -331,3 +331,5 @@ NET "cpld_clk" CLOCK_DEDICATED_ROUTE = FALSE; #NET "adc_a<*>" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING; #NET "adc_b<*>" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING; + +TIMESPEC "TS_clk_div_to_dsp_clk" = FROM "clk_div" TO "dcm_out" 10 ns; diff --git a/usrp2/top/u2_rev3/u2_rev3.v b/usrp2/top/u2_rev3/u2_rev3.v index 23a825007..3a43e4ffe 100644 --- a/usrp2/top/u2_rev3/u2_rev3.v +++ b/usrp2/top/u2_rev3/u2_rev3.v @@ -171,8 +171,15 @@ module u2_rev3 wd <= wd + 1; assign WDI = wd[15]; - IBUFGDS clk_fpga_pin (.O(clk_fpga),.I(clk_fpga_p),.IB(clk_fpga_n)); + wire clk_fpga_unbuf; + + IBUFGDS clk_fpga_pin (.O(clk_fpga_unbuf),.I(clk_fpga_p),.IB(clk_fpga_n)); + BUFG clk_fpga_BUF (.O(clk_fpga),.I(clk_fpga_unbuf)); + defparam clk_fpga_pin.IOSTANDARD = "LVPECL_25"; + + wire cpld_clock_buf; + BUFG cpld_clock_BUF (.O(cpld_clock_buf),.I(cpld_clock)); wire exp_pps_in; IBUFDS exp_pps_in_pin (.O(exp_pps_in),.I(exp_pps_in_p),.IB(exp_pps_in_n)); @@ -310,7 +317,9 @@ module u2_rev3 reg [15:0] ser_r_int; reg ser_rklsb_int, ser_rkmsb_int; - always @(posedge ser_rx_clk) + wire ser_rx_clk_buf; + BUFG ser_rx_clk_BUF (.O(ser_rx_clk_buf),.I(ser_rx_clk)); + always @(posedge ser_rx_clk_buf) begin ser_r_int <= ser_r; ser_rklsb_int <= ser_rklsb; @@ -367,7 +376,7 @@ module u2_rev3 .ser_t (ser_t_unreg[15:0]), .ser_tklsb (ser_tklsb_unreg), .ser_tkmsb (ser_tkmsb_unreg), - .ser_rx_clk (ser_rx_clk), + .ser_rx_clk (ser_rx_clk_buf), .ser_r (ser_r_int[15:0]), .ser_rklsb (ser_rklsb_int), .ser_rkmsb (ser_rkmsb_int), |