diff options
| -rw-r--r-- | usrp2/sdr_lib/Makefile.srcs | 4 | ||||
| -rw-r--r-- | usrp2/sdr_lib/ddc_chain.v (renamed from usrp2/sdr_lib/dsp_core_rx.v) | 9 | ||||
| -rw-r--r-- | usrp2/sdr_lib/dsp_core_rx_old.v | 200 | ||||
| -rw-r--r-- | usrp2/sdr_lib/dsp_core_rx_tb.v | 10 | ||||
| -rw-r--r-- | usrp2/sdr_lib/dsp_core_rx_udp.v | 200 | ||||
| -rw-r--r-- | usrp2/sdr_lib/duc_chain.v (renamed from usrp2/sdr_lib/dsp_core_tx.v) | 6 | ||||
| -rw-r--r-- | usrp2/sdr_lib/dummy_rx.v | 2 | ||||
| -rw-r--r-- | usrp2/top/B100/u1plus_core.v | 4 | ||||
| -rw-r--r-- | usrp2/top/E1x0/u1e_core.v | 4 | ||||
| -rw-r--r-- | usrp2/top/N2x0/u2plus_core.v | 4 | ||||
| -rw-r--r-- | usrp2/top/USRP2/u2_core.v | 21 | ||||
| -rw-r--r-- | usrp2/vrt/vita_rx_chain.v | 5 | ||||
| -rw-r--r-- | usrp2/vrt/vita_tx_chain.v | 26 |
13 files changed, 49 insertions, 446 deletions
diff --git a/usrp2/sdr_lib/Makefile.srcs b/usrp2/sdr_lib/Makefile.srcs index 629b92cc8..0f1958991 100644 --- a/usrp2/sdr_lib/Makefile.srcs +++ b/usrp2/sdr_lib/Makefile.srcs @@ -23,8 +23,8 @@ clip_reg.v \ cordic.v \ cordic_z24.v \ cordic_stage.v \ -dsp_core_rx.v \ -dsp_core_tx.v \ +ddc_chain.v \ +duc_chain.v \ dspengine_16to8.v \ hb_dec.v \ hb_interp.v \ diff --git a/usrp2/sdr_lib/dsp_core_rx.v b/usrp2/sdr_lib/ddc_chain.v index d1c7e238a..7f51d2865 100644 --- a/usrp2/sdr_lib/dsp_core_rx.v +++ b/usrp2/sdr_lib/ddc_chain.v @@ -15,14 +15,15 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // +//! The USRP digital down-conversion chain -module dsp_core_rx +module ddc_chain #(parameter BASE = 160) (input clk, input rst, input set_stb, input [7:0] set_addr, input [31:0] set_data, - input [23:0] adc_i, input adc_ovf_i, - input [23:0] adc_q, input adc_ovf_q, + input [23:0] adc_i, + input [23:0] adc_q, output [31:0] sample, input run, @@ -141,4 +142,4 @@ module dsp_core_rx assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_hb1, strobe_hb2}; -endmodule // dsp_core_rx +endmodule // ddc_chain diff --git a/usrp2/sdr_lib/dsp_core_rx_old.v b/usrp2/sdr_lib/dsp_core_rx_old.v deleted file mode 100644 index 90d5d839f..000000000 --- a/usrp2/sdr_lib/dsp_core_rx_old.v +++ /dev/null @@ -1,200 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - - -`define DSP_CORE_RX_BASE 160 -module dsp_core_rx_old - (input clk, input rst, - input set_stb, input [7:0] set_addr, input [31:0] set_data, - - input [13:0] adc_a, input adc_ovf_a, - input [13:0] adc_b, input adc_ovf_b, - - input [15:0] io_rx, - - output [31:0] sample, - input run, - output strobe, - output [31:0] debug - ); - - wire [15:0] scale_i, scale_q; - wire [13:0] adc_a_ofs, adc_b_ofs; - reg [13:0] adc_i, adc_q; - wire [31:0] phase_inc; - reg [31:0] phase; - - wire [35:0] prod_i, prod_q; - wire [23:0] i_cordic, q_cordic; - wire [23:0] i_cic, q_cic; - wire [17:0] i_cic_scaled, q_cic_scaled; - wire [17:0] i_hb1, q_hb1; - wire [17:0] i_hb2, q_hb2; - wire [15:0] i_out, q_out; - - wire strobe_cic, strobe_hb1, strobe_hb2; - wire enable_hb1, enable_hb2; - wire [7:0] cic_decim_rate; - - wire [31:10] UNUSED_1; - wire [31:4] UNUSED_2; - wire [31:2] UNUSED_3; - - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+0)) sr_0 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(phase_inc),.changed()); - - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+1)) sr_1 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({scale_i,scale_q}),.changed()); - - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+2)) sr_2 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_1, enable_hb1, enable_hb2, cic_decim_rate}),.changed()); - - rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+6)) rx_dcoffset_a - (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_in(adc_a),.adc_out(adc_a_ofs)); - - rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+7)) rx_dcoffset_b - (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_in(adc_b),.adc_out(adc_b_ofs)); - - wire [3:0] muxctrl; - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+8)) sr_8 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_2,muxctrl}),.changed()); - - wire [1:0] gpio_ena; - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+9)) sr_9 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_3,gpio_ena}),.changed()); - - // The TVRX connects to what is called adc_b, thus A and B are - // swapped throughout the design. - // - // In the interest of expediency and keeping the s/w sane, we just remap them here. - // The I & Q fields are mapped the same: - // 0 -> "the real A" (as determined by the TVRX) - // 1 -> "the real B" - // 2 -> const zero - - always @(posedge clk) - case(muxctrl[1:0]) // The I mapping - 0: adc_i <= adc_b_ofs; // "the real A" - 1: adc_i <= adc_a_ofs; - 2: adc_i <= 0; - default: adc_i <= 0; - endcase // case(muxctrl[1:0]) - - always @(posedge clk) - case(muxctrl[3:2]) // The Q mapping - 0: adc_q <= adc_b_ofs; // "the real A" - 1: adc_q <= adc_a_ofs; - 2: adc_q <= 0; - default: adc_q <= 0; - endcase // case(muxctrl[3:2]) - - always @(posedge clk) - if(rst) - phase <= 0; - else if(~run) - phase <= 0; - else - phase <= phase + phase_inc; - - MULT18X18S mult_i - (.P(prod_i), // 36-bit multiplier output - .A({{4{adc_i[13]}},adc_i} ), // 18-bit multiplier input - .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input - .C(clk), // Clock input - .CE(1), // Clock enable input - .R(rst) // Synchronous reset input - ); - - MULT18X18S mult_q - (.P(prod_q), // 36-bit multiplier output - .A({{4{adc_q[13]}},adc_q} ), // 18-bit multiplier input - .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input - .C(clk), // Clock input - .CE(1), // Clock enable input - .R(rst) // Synchronous reset input - ); - - - cordic_z24 #(.bitwidth(24)) - cordic(.clock(clk), .reset(rst), .enable(run), - .xi(prod_i[23:0]),. yi(prod_q[23:0]), .zi(phase[31:8]), - .xo(i_cordic),.yo(q_cordic),.zo() ); - - cic_strober cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(cic_decim_rate), - .strobe_fast(1),.strobe_slow(strobe_cic) ); - - cic_decim #(.bw(24)) - decim_i (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(i_cordic),.signal_out(i_cic)); - - cic_decim #(.bw(24)) - decim_q (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(q_cordic),.signal_out(q_cic)); - - round_reg #(.bits_in(24),.bits_out(18)) round_icic (.clk(clk),.in(i_cic),.out(i_cic_scaled)); - round_reg #(.bits_in(24),.bits_out(18)) round_qcic (.clk(clk),.in(q_cic),.out(q_cic_scaled)); - reg strobe_cic_d1; - always @(posedge clk) strobe_cic_d1 <= strobe_cic; - - small_hb_dec #(.WIDTH(18)) small_hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic_d1),.data_in(i_cic_scaled),.stb_out(strobe_hb1),.data_out(i_hb1)); - - small_hb_dec #(.WIDTH(18)) small_hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic_d1),.data_in(q_cic_scaled),.stb_out(),.data_out(q_hb1)); - - wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate}; - hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2)); - - hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2)); - - round #(.bits_in(18),.bits_out(16)) round_iout (.in(i_hb2),.out(i_out)); - round #(.bits_in(18),.bits_out(16)) round_qout (.in(q_hb2),.out(q_out)); - - // Streaming GPIO - // - // io_rx[15] => I channel LSB if gpio_ena[0] high - // io_rx[14] => Q channel LSB if gpio_ena[1] high - - reg [31:0] sample_reg; - always @(posedge clk) - begin - sample_reg[31:17] <= i_out[15:1]; - sample_reg[15:1] <= q_out[15:1]; - sample_reg[16] <= gpio_ena[0] ? io_rx[15] : i_out[0]; - sample_reg[0] <= gpio_ena[1] ? io_rx[14] : q_out[0]; - end - - assign sample = sample_reg; - assign strobe = strobe_hb2; - assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_cic_d1, strobe_hb1, strobe_hb2}; - -endmodule // dsp_core_rx diff --git a/usrp2/sdr_lib/dsp_core_rx_tb.v b/usrp2/sdr_lib/dsp_core_rx_tb.v index 271db8cef..a221bed44 100644 --- a/usrp2/sdr_lib/dsp_core_rx_tb.v +++ b/usrp2/sdr_lib/dsp_core_rx_tb.v @@ -1,6 +1,6 @@ `timescale 1ns/1ns -module dsp_core_rx_tb(); +module ddc_chain_tb(); reg clk, rst; @@ -9,8 +9,8 @@ module dsp_core_rx_tb(); initial clk = 0; always #5 clk = ~clk; - initial $dumpfile("dsp_core_rx_tb.vcd"); - initial $dumpvars(0,dsp_core_rx_tb); + initial $dumpfile("ddc_chain_tb.vcd"); + initial $dumpvars(0,ddc_chain_tb); reg signed [23:0] adc_in; wire signed [15:0] adc_out_i, adc_out_q; @@ -27,7 +27,7 @@ module dsp_core_rx_tb(); reg [7:0] set_addr; reg [31:0] set_data; - dsp_core_rx #(.BASE(0)) dsp_core_rx + ddc_chain #(.BASE(0)) ddc_chain (.clk(clk),.rst(rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_i(adc_in), .adc_ovf_i(0), @@ -70,4 +70,4 @@ module dsp_core_rx_tb(); adc_in <= adc_in + 4; //adc_in <= (($random % 473) + 23)/4; */ -endmodule // dsp_core_rx_tb +endmodule // ddc_chain_tb diff --git a/usrp2/sdr_lib/dsp_core_rx_udp.v b/usrp2/sdr_lib/dsp_core_rx_udp.v deleted file mode 100644 index 08dab37e6..000000000 --- a/usrp2/sdr_lib/dsp_core_rx_udp.v +++ /dev/null @@ -1,200 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - - -module dsp_core_rx - #(parameter BASE = 160) - (input clk, input rst, - input set_stb, input [7:0] set_addr, input [31:0] set_data, - - input [13:0] adc_a, input adc_ovf_a, - input [13:0] adc_b, input adc_ovf_b, - - input [15:0] io_rx, - - output [31:0] sample, - input run, - output strobe, - output [31:0] debug - ); - - wire [15:0] scale_i, scale_q; - wire [13:0] adc_a_ofs, adc_b_ofs; - reg [13:0] adc_i, adc_q; - wire [31:0] phase_inc; - reg [31:0] phase; - - wire [35:0] prod_i, prod_q; - wire [23:0] i_cordic, q_cordic; - wire [23:0] i_cic, q_cic; - wire [17:0] i_cic_scaled, q_cic_scaled; - wire [17:0] i_hb1, q_hb1; - wire [17:0] i_hb2, q_hb2; - wire [15:0] i_out, q_out; - - wire strobe_cic, strobe_hb1, strobe_hb2; - wire enable_hb1, enable_hb2; - wire [7:0] cic_decim_rate; - - wire [31:10] UNUSED_1; - wire [31:4] UNUSED_2; - wire [31:2] UNUSED_3; - - setting_reg #(.my_addr(BASE+0)) sr_0 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(phase_inc),.changed()); - - setting_reg #(.my_addr(BASE+1)) sr_1 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({scale_i,scale_q}),.changed()); - - setting_reg #(.my_addr(BASE+2)) sr_2 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_1, enable_hb1, enable_hb2, cic_decim_rate}),.changed()); - - rx_dcoffset #(.WIDTH(14),.ADDR(BASE+3)) rx_dcoffset_a - (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_in(adc_a),.adc_out(adc_a_ofs)); - - rx_dcoffset #(.WIDTH(14),.ADDR(BASE+4)) rx_dcoffset_b - (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_in(adc_b),.adc_out(adc_b_ofs)); - - wire [3:0] muxctrl; - setting_reg #(.my_addr(BASE+5)) sr_8 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_2,muxctrl}),.changed()); - - wire [1:0] gpio_ena; - setting_reg #(.my_addr(BASE+6)) sr_9 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_3,gpio_ena}),.changed()); - - // The TVRX connects to what is called adc_b, thus A and B are - // swapped throughout the design. - // - // In the interest of expediency and keeping the s/w sane, we just remap them here. - // The I & Q fields are mapped the same: - // 0 -> "the real A" (as determined by the TVRX) - // 1 -> "the real B" - // 2 -> const zero - - always @(posedge clk) - case(muxctrl[1:0]) // The I mapping - 0: adc_i <= adc_b_ofs; // "the real A" - 1: adc_i <= adc_a_ofs; - 2: adc_i <= 0; - default: adc_i <= 0; - endcase // case(muxctrl[1:0]) - - always @(posedge clk) - case(muxctrl[3:2]) // The Q mapping - 0: adc_q <= adc_b_ofs; // "the real A" - 1: adc_q <= adc_a_ofs; - 2: adc_q <= 0; - default: adc_q <= 0; - endcase // case(muxctrl[3:2]) - - always @(posedge clk) - if(rst) - phase <= 0; - else if(~run) - phase <= 0; - else - phase <= phase + phase_inc; - - MULT18X18S mult_i - (.P(prod_i), // 36-bit multiplier output - .A({{4{adc_i[13]}},adc_i} ), // 18-bit multiplier input - .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input - .C(clk), // Clock input - .CE(1), // Clock enable input - .R(rst) // Synchronous reset input - ); - - MULT18X18S mult_q - (.P(prod_q), // 36-bit multiplier output - .A({{4{adc_q[13]}},adc_q} ), // 18-bit multiplier input - .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input - .C(clk), // Clock input - .CE(1), // Clock enable input - .R(rst) // Synchronous reset input - ); - - - cordic_z24 #(.bitwidth(24)) - cordic(.clock(clk), .reset(rst), .enable(run), - .xi(prod_i[23:0]),. yi(prod_q[23:0]), .zi(phase[31:8]), - .xo(i_cordic),.yo(q_cordic),.zo() ); - - cic_strober cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(cic_decim_rate), - .strobe_fast(1),.strobe_slow(strobe_cic) ); - - cic_decim #(.bw(24)) - decim_i (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(i_cordic),.signal_out(i_cic)); - - cic_decim #(.bw(24)) - decim_q (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(q_cordic),.signal_out(q_cic)); - - round_reg #(.bits_in(24),.bits_out(18)) round_icic (.clk(clk),.in(i_cic),.out(i_cic_scaled)); - round_reg #(.bits_in(24),.bits_out(18)) round_qcic (.clk(clk),.in(q_cic),.out(q_cic_scaled)); - reg strobe_cic_d1; - always @(posedge clk) strobe_cic_d1 <= strobe_cic; - - small_hb_dec #(.WIDTH(18)) small_hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic_d1),.data_in(i_cic_scaled),.stb_out(strobe_hb1),.data_out(i_hb1)); - - small_hb_dec #(.WIDTH(18)) small_hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic_d1),.data_in(q_cic_scaled),.stb_out(),.data_out(q_hb1)); - - wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate}; - hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2)); - - hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2)); - - round #(.bits_in(18),.bits_out(16)) round_iout (.in(i_hb2),.out(i_out)); - round #(.bits_in(18),.bits_out(16)) round_qout (.in(q_hb2),.out(q_out)); - - // Streaming GPIO - // - // io_rx[15] => I channel LSB if gpio_ena[0] high - // io_rx[14] => Q channel LSB if gpio_ena[1] high - - reg [31:0] sample_reg; - always @(posedge clk) - begin - sample_reg[31:17] <= i_out[15:1]; - sample_reg[15:1] <= q_out[15:1]; - sample_reg[16] <= gpio_ena[0] ? io_rx[15] : i_out[0]; - sample_reg[0] <= gpio_ena[1] ? io_rx[14] : q_out[0]; - end - - assign sample = sample_reg; - assign strobe = strobe_hb2; - assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_cic_d1, strobe_hb1, strobe_hb2}; - -endmodule // dsp_core_rx diff --git a/usrp2/sdr_lib/dsp_core_tx.v b/usrp2/sdr_lib/duc_chain.v index 4e0163e0a..248870a69 100644 --- a/usrp2/sdr_lib/dsp_core_tx.v +++ b/usrp2/sdr_lib/duc_chain.v @@ -15,13 +15,15 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // +//! The USRP digital up-conversion chain -module dsp_core_tx +module duc_chain #(parameter BASE=0) (input clk, input rst, input set_stb, input [7:0] set_addr, input [31:0] set_data, - output [23:0] tx_i, output [23:0] tx_q, + output [23:0] dac_i, + output [23:0] dac_q, // To tx_control input [31:0] sample, diff --git a/usrp2/sdr_lib/dummy_rx.v b/usrp2/sdr_lib/dummy_rx.v index b22d5f896..42bbe36b2 100644 --- a/usrp2/sdr_lib/dummy_rx.v +++ b/usrp2/sdr_lib/dummy_rx.v @@ -76,4 +76,4 @@ module dummy_rx q_out <= q_out + 1; -endmodule // dsp_core_rx +endmodule // ddc_chain diff --git a/usrp2/top/B100/u1plus_core.v b/usrp2/top/B100/u1plus_core.v index c883c5ca8..0a03517b6 100644 --- a/usrp2/top/B100/u1plus_core.v +++ b/usrp2/top/B100/u1plus_core.v @@ -155,7 +155,7 @@ module u1plus_core wire [35:0] vita_rx_data0; wire vita_rx_src_rdy0, vita_rx_dst_rdy0; - dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 + ddc_chain #(.BASE(SR_RX_DSP0)) ddc_chain0 (.clk(wb_clk),.rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), @@ -178,7 +178,7 @@ module u1plus_core wire [35:0] vita_rx_data1; wire vita_rx_src_rdy1, vita_rx_dst_rdy1; - dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 + ddc_chain #(.BASE(SR_RX_DSP1)) ddc_chain1 (.clk(wb_clk),.rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), diff --git a/usrp2/top/E1x0/u1e_core.v b/usrp2/top/E1x0/u1e_core.v index aede63bac..b581ed50a 100644 --- a/usrp2/top/E1x0/u1e_core.v +++ b/usrp2/top/E1x0/u1e_core.v @@ -160,7 +160,7 @@ module u1e_core wire [35:0] vita_rx_data0; wire vita_rx_src_rdy0, vita_rx_dst_rdy0; - dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 + ddc_chain #(.BASE(SR_RX_DSP0)) ddc_chain0 (.clk(wb_clk),.rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), @@ -183,7 +183,7 @@ module u1e_core wire [35:0] vita_rx_data1; wire vita_rx_src_rdy1, vita_rx_dst_rdy1; - dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 + ddc_chain #(.BASE(SR_RX_DSP1)) ddc_chain1 (.clk(wb_clk),.rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), diff --git a/usrp2/top/N2x0/u2plus_core.v b/usrp2/top/N2x0/u2plus_core.v index 3ead0db8e..f78d9013f 100644 --- a/usrp2/top/N2x0/u2plus_core.v +++ b/usrp2/top/N2x0/u2plus_core.v @@ -576,7 +576,7 @@ module u2plus_core always @(posedge dsp_clk) run_rx0_d1 <= run_rx0; - dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 + ddc_chain #(.BASE(SR_RX_DSP0)) ddc_chain0 (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), @@ -604,7 +604,7 @@ module u2plus_core always @(posedge dsp_clk) run_rx1_d1 <= run_rx1; - dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 + ddc_chain #(.BASE(SR_RX_DSP1)) ddc_chain1 (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), diff --git a/usrp2/top/USRP2/u2_core.v b/usrp2/top/USRP2/u2_core.v index bbd0e9337..da12371bb 100644 --- a/usrp2/top/USRP2/u2_core.v +++ b/usrp2/top/USRP2/u2_core.v @@ -564,10 +564,10 @@ module u2_core always @(posedge dsp_clk) run_rx0_d1 <= run_rx0; - dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 + ddc_chain #(.BASE(SR_RX_DSP0)) ddc_chain0 (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), + .adc_i(adc_i),.adc_q(adc_q), .sample(sample_rx0), .run(run_rx0_d1), .strobe(strobe_rx0), .debug() ); @@ -592,10 +592,10 @@ module u2_core always @(posedge dsp_clk) run_rx1_d1 <= run_rx1; - dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 + ddc_chain #(.BASE(SR_RX_DSP1)) ddc_chain1 (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), + .adc_i(adc_i),.adc_q(adc_q), .sample(sample_rx1), .run(run_rx1_d1), .strobe(strobe_rx1), .debug() ); @@ -648,8 +648,10 @@ module u2_core .debug2(debug_extfifo2) ); wire [23:0] tx_i, tx_q; + wire [31:0] sample_tx; + wire strobe_tx; - vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), + vita_tx_chain #(.BASE(SR_TX_CTRL), .REPORT_ERROR(1), .DO_FLOW_CONTROL(1), .PROT_ENG_FLAGS(1), .USE_TRANS_HEADER(1), .DSP_NUMBER(0)) @@ -659,10 +661,17 @@ module u2_core .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), - .tx_i(tx_i),.tx_q(tx_q), + .sample(sample_tx), .strobe(strobe_tx), .underrun(underrun), .run(run_tx), .debug(debug_vt)); + duc_chain #(.BASE(SR_TX_DSP)) duc_chain + (.clk(dsp_clk),.rst(dsp_rst), + .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .dac_i(tx_i),.dac_q(tx_q), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .debug() ); + tx_frontend #(.BASE(SR_TX_FRONT)) tx_frontend (.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), diff --git a/usrp2/vrt/vita_rx_chain.v b/usrp2/vrt/vita_rx_chain.v index 8b41e5fa8..332fdce37 100644 --- a/usrp2/vrt/vita_rx_chain.v +++ b/usrp2/vrt/vita_rx_chain.v @@ -23,9 +23,10 @@ module vita_rx_chain parameter PROT_ENG_FLAGS=1) (input clk, input reset, input clear, input set_stb, input [7:0] set_addr, input [31:0] set_data, - input [63:0] vita_time, output overrun, - input [31:0] sample, output run, input strobe, + input [63:0] vita_time, + input [31:0] sample, input strobe, output [35:0] rx_data_o, output rx_src_rdy_o, input rx_dst_rdy_i, + output overrun, output run, output [31:0] debug ); wire [100:0] sample_data; diff --git a/usrp2/vrt/vita_tx_chain.v b/usrp2/vrt/vita_tx_chain.v index ac9f08fc8..5c211c51e 100644 --- a/usrp2/vrt/vita_tx_chain.v +++ b/usrp2/vrt/vita_tx_chain.v @@ -17,8 +17,7 @@ module vita_tx_chain - #(parameter BASE_CTRL=0, - parameter BASE_DSP=0, + #(parameter BASE=0, parameter REPORT_ERROR=0, parameter DO_FLOW_CONTROL=0, parameter PROT_ENG_FLAGS=0, @@ -29,7 +28,7 @@ module vita_tx_chain input [63:0] vita_time, input [35:0] tx_data_i, input tx_src_rdy_i, output tx_dst_rdy_o, output [35:0] err_data_o, output err_src_rdy_o, input err_dst_rdy_i, - output [23:0] tx_i, output [23:0] tx_q, + output [31:0] sample, input strobe, output underrun, output run, output [31:0] debug); @@ -39,7 +38,6 @@ module vita_tx_chain wire [FIFOWIDTH-1:0] tx1_data; wire tx1_src_rdy, tx1_dst_rdy; wire clear_vita; - wire [31:0] sample_tx; wire [31:0] streamid, message; wire trigger, sent; wire [31:0] debug_vtc, debug_vtd, debug_tx_dsp; @@ -48,20 +46,19 @@ module vita_tx_chain wire [31:0] error_code; wire clear_seqnum; wire [31:0] current_seqnum; - wire strobe_tx; assign underrun = error; assign message = error_code; - setting_reg #(.my_addr(BASE_CTRL+1)) sr + setting_reg #(.my_addr(BASE+1)) sr (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(),.changed(clear_vita)); - setting_reg #(.my_addr(BASE_CTRL+2), .at_reset(0)) sr_streamid + setting_reg #(.my_addr(BASE+2), .at_reset(0)) sr_streamid (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(streamid),.changed(clear_seqnum)); - vita_tx_deframer #(.BASE(BASE_CTRL), + vita_tx_deframer #(.BASE(BASE), .MAXCHAN(MAXCHAN), .USE_TRANS_HEADER(USE_TRANS_HEADER)) vita_tx_deframer @@ -72,20 +69,13 @@ module vita_tx_chain .current_seqnum(current_seqnum), .debug(debug_vtd) ); - vita_tx_control #(.BASE(BASE_CTRL), .WIDTH(32*MAXCHAN)) vita_tx_control + vita_tx_control #(.BASE(BASE), .WIDTH(32*MAXCHAN)) vita_tx_control (.clk(clk), .reset(reset), .clear(clear_vita), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .vita_time(vita_time), .error(error), .ack(ack), .error_code(error_code), .sample_fifo_i(tx1_data), .sample_fifo_src_rdy_i(tx1_src_rdy), .sample_fifo_dst_rdy_o(tx1_dst_rdy), - .sample(sample_tx), .run(run), .strobe(strobe_tx), .packet_consumed(packet_consumed), + .sample(sample), .run(run), .strobe(strobe), .packet_consumed(packet_consumed), .debug(debug_vtc) ); - - dsp_core_tx #(.BASE(BASE_DSP)) dsp_core_tx - (.clk(clk),.rst(reset), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .sample(sample_tx), .run(run), .strobe(strobe_tx), - .tx_i(tx_i),.tx_q(tx_q), - .debug(debug_tx_dsp) ); wire [35:0] flow_data, err_data_int; wire flow_src_rdy, flow_dst_rdy, err_src_rdy_int, err_dst_rdy_int; @@ -96,7 +86,7 @@ module vita_tx_chain .streamid(streamid), .vita_time(vita_time), .message(32'd0), .seqnum(current_seqnum), .data_o(flow_data), .src_rdy_o(flow_src_rdy), .dst_rdy_i(flow_dst_rdy)); - trigger_context_pkt #(.BASE(BASE_CTRL)) trigger_context_pkt + trigger_context_pkt #(.BASE(BASE)) trigger_context_pkt (.clk(clk), .reset(reset), .clear(clear_vita), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .packet_consumed(packet_consumed), .trigger(trigger)); |